Plymouth Owners Club - Plymouth Club

1936A. GlassAll glass is clear shatter proof (Safety Plate) with a DuPlate logo, which was standard for the windshieldand optional for all other windows.B. Top or RoofMost closed cars have a material insert in roof. A steel insert such as used on the 1936 Dodge wasavailable as an option although few if any are still around.Material could be grained or plain design. All open cars have canvas tops, tan in color.C. TiresGoodyear: 6.00 x 16; and 5.25 x 17 on most models. 6.25 x 16 on 7-pass and traveler sedan only.Tread is the “Diamond” Pattern. Black walls were installed at the factory although the dealer sometimesadded whitewallsD. BodyRunning boards should be made of steel with proper 1936-molded rubber. The body should be all steel,no fiberglass.E. UndercarriageIt should be painted black with proper grease fittings installed.F. PaintAny Corporation color was available at additional charge. Black fenders unless ordered as body color.Synthetic enamel on 2 door sedans; lacquer on other styles.Body color stops at the hood lacing when the firewall is painted black, however, firewalls may be black orbody color.The rumble seat step bracket and rear spare tire carrier are always painted high gloss, black enamel.G. WheelsShould be artillery type with the correct stripe - two lines on the wheels of P-2 models; a single stripe onall P-1 models dissecting the valve stem hole and the striping is on the spider, not the wheel rim.I. Interior TrimDash gauge cluster face should be white in color. All export models had a dark brown face.Interior bright work must be nickel plated except the emergency brake lever handle on the P-2 models,which will be chrome. P-1 models will have black enamel paint on the entire assembly.Brake and clutch pedals are to be oriented horizontally.J. UpholsteryShould be mohair, broadcloth or leather. Pattern could be plain or pinstriped. Seats should match doorpanels in color.One sun visor was standard; a second one was available as an option.Frieze is used on armrests and the back of the front seat on all models.The kick panels are common auto interior cardboard with a brown paint or coating and use brown paintedbutton head fasteners for installation. The firewall insulator is also cardboard with a jute back. It ispainted or coated black and uses black button head fasteners for installation.A robe rail is also available for the back of the front seat on 4dr sedan models.The heal board at the base of the rear seat is cardboard with a brown paint or coating and is glued to theseat base. All rumble seat cushions are upholstered in brown leather32