hands free faucet controllers - NFMT

hands free faucet controllersTAPMASTER® OFFERS A DISTINCTIVE PATENTED TECHNOLOGY USING WATER PRESSUREIN EXISTING WATER LINES AS THE UNIQUE METHOD OF ACTIVATION.

no electrical no batteries no electronicsTapmaster ® modelsTAPMASTER® HANDS-FREE SYSTEMS USE A PATENTED TECHNOLOGYTHAT USES ONLY WATER PRESSURE TO CONTROL YOUR FAUCET, MAKINGIT DIFFERENT THAN ANY OTHER FAUCET ACTIVATOR ON THE MARKET.Cabinet Door ModelsThese models use a cabinet door as the activator by pressing the pilot/actuator valve mountedon the inside cabinet wall opposite the door hinge. Set the faucet open at the flow and temperaturedesired; press knee lightly against the cabinet door to activate water flow and release to stop it.1710 Cabinet Door Activated – for single water line1720 Cabinet Door Activated – for hot & cold water lines

capital cost savings maintenance cost savings water & energy savingsKick Plate ModelsKick plate models mount on cabinet toe kicks. Set faucet open at the flow and temperaturedesired; press foot lightly against vertical face of the kick plate to activate water flow and releaseto stop it. For continuous flow press down on the angled face to latch; to release pressthe vertical face. Kick plate is made from 18 gauge stainless steel.1740 Kick Plate Activated – for single water line 1750 Kick Plate Activated – for hot & cold water lines

no electrical no batteries no electronicsTapmaster ® modelsTAPMASTER® PRODUCES A WIDE ARRAY OF ACTIVATORSTO ENSURE WE HAVE AN APPLICATION THAT LOOKS GOODAND WORKS PERFECTLY IN ANY SITUATION.Combination Kick Plate & Door ActivatedThe 1751 model offers you the best of both worlds. It isa combination of the model 1750/1720 and is used in cabinetor island situations. Set the faucet open at the flow andtemperature desired: press your foot against a kick plate or yourknee against the cabinet door to activate water flow and releaseit to stop. Kick plate is made from 18 gauge stainless steel.1751 Combination Kick Plate & Door ActivatedKick PlateThe 1756 kick plate model allows for hands free controlof not only when your faucet is activated but alsothe temperature of the water. By pressing on either endof the pedal assembly you can select hot or cold waterwhile the center of the pedal provides a mixture for warm water.Like all of our kick plate models the water flow can be lockedon by pressing down on the top of the pedal and released by tappingthe face of the pedal lightly.1756 Kick PlateFloor Foot PedalFloor foot pedal models are designed for a variety of applications includingwall mounted sinks, sinks in cabinets with or without toe kicks or anynon typical sink arrangements. Floor foot pedals are madefrom 18 gauge stainless steel and are operated either fromthe floor or mounted on a vertical face and usedas a kick plate.1760 Floor Foot Pedal

capital cost savings maintenance cost savings water & energy savingsEuro Foot ActivatedEuro models mount on cabinet toe kicks. Set faucet open at the flowand temperature desired; push Euro foot activator in any directionfor momentary water flow, releaseto turn off. For continuous water flow,push Euro foot activator sidewaysto 45 degrees in either direction to lock on; push activatorback to vertical rest position to turn off. Finishis brushed nickel. Probe is rubber polyurethane.1770 Euro Momentary Foot Activated – for hot & cold water lines1771 Euro Momentary Foot Activated – for single water line1775 Euro Locking Foot Activated – for hot & cold water lines1776 Euro Locking Foot Activated – for single water lineIn Floor Foot PedalIn floor foot pedal models are designed for a variety of applicationsincluding wall mounted sinks, sinks in cabinets with or without toekicks or any non typical sink arrangements. Floor foot pedals are madefrom 18 gauge stainless steel and are operated from the floor.1780 In Floor Foot Pedal 1786 In Floor Foot Pedal

moreabout Tapmaster ®THE TAPMASTER® SYSTEM HAS BEEN RIGOROUSLY TESTEDTO ENSURE ITS QUALITY AND RELIABILITY.TAPMASTER ® is recognizedas the superior alternative to battery & electrical powered sensorfaucets and mechanical foot pedal valves. TAPMASTER ® features easyinstallation, no ongoing maintenance and comes with a five yearlimited product warranty.TAPMASTER ® does not use o-rings or sliding seals, which makesour product extremely durable and reliable especially in areas thatexperience high water mineralization. We produce finely machinedparts held within extraordinary tolerances not normally foundin the Plumbing Industry.Standards and approvalsTAPMASTER ® products are approved for the following standards:American Society Mechanical Engineers (ASME) – A112.18.1, NationalSanitation Foundation (NSF) - 61-9, Canadian Standards Association(CSA) – for US and Canada – B125 and are ADA and OSHPD compliant.We have a team of individuals who take great pride in producingour line of TAPMASTER ® products. We hand test each TAPMASTER ®unit before it leaves the plant, resulting in a product line builtaround excellence andknown for its reliability.CSA – B125ASME – A112.18.1NSF 61-9SpecificationsDimensions valve Block (less tube fittings) 2.26" x .88" x 1.25" (5.74 x 2.24 x 3.18 cm)button Valve (less fittings) .63" x .63" x 1.0" (1.60 x 1.60 x 2.54 cm)kick Plate (1750,1740) 8.0"w x 3.42"h x 1.14"d (20.32 x 8.64 x 2.90 cm)Floor Foot Pedal (1760) 7.1"w x 3.0"h x 1.1"d (18 x 7.6 x 2.8 cm)Euro Foot Activated(1770, 1771, 1775,1776) 1.19"w x 4.92"h x 1.37"d (30 x 125 x 35 mm)Pressure operating 0 to 125 psi (862 kpa) maximumStatic Burst Rating700 psi (4,830 kpa) for complete assemblyFlow both Valve Blocks 7.2 gpm @ 60 psi (27.0 I/m @ 4 bar)Construction valve Bodies chrome plated brassSealssilicone or E.P.D.M.control Tubing1/8 O.D. 3 tube bundle (high density polyurethane)kick Plate18g #4 stainless steel top, aluminum baseEuro Foot Activatedbrushed nickel plated brass housingfoot probe – polyurethaneFiltration control Circuit 25 micronMain Portgreater than .060" (1.5 mm)Connections – Valve Blocks Inlet 3/8" tube (for 3/8" compression)outletNut and sleeve, 3/8" compressionInstallation Requirements Cabinet Door cabinet door of suitable height and construction for knee pressure, spring loaded hinges recommendedkick Platetoe kick height of not less than 4" (10.2 cm), horizontal clearance of at least 8" (20.4 cm) on one end(1750,1740) of plate to allow for removal of stainless steel coverEuro Foot Activatedtoe kick height between 3" to 6" (75 to 150mm) polyurethane probe can be cut to length to fit by(1770, 1771, 1775,1776) keeping the bottom of the probe between ½ to 1" above the finished floorU.S. Patent Nos. 5505227, 6254057 & 6382585, Canadian Patent No. 2109684, European Patent No. 0654628, International & Other Patents PendingCUSTOM MODELS, OPTIONS AND ACCESSORIES ARE AVAILABLE. CALL TO DISCUSS OTHER CONFIGURATIONS.For more information please contact: