Ultra Fence Install Guide - Ultra Aluminum Manufacturing, Inc.

Time for the gateAfter you have installed all of your fence panels andhave leveled the gate posts, it's time to hang the gates.Preparing to attach the gateAfter you make sure your gate posts are level and thecement is fully set, confirm the direction of the swingand bring in the gate.Install the hingesInstall hinges on the gate posts first. Use 1'' long selftapping screws. Center the gate in the opening andput only one screw in each hinge. This is to allow forsome final adjustment. If installing self-closinghinges, adjust tension in the hinges for a proper swingrate.Install the gate latchNow install the gate latch per the includedinstructions.Putting in the remaining screwsIf the gate swings properly, put the remaining screwsin the hinges. Do not use the gate until the cementfully sets. YOU ARE DONE!