Ardex 8 plus 9 msds.pdf - The Cronin Company

Material Safety Data SheetMay be used to comply withOSHA’s Hazard Communication Standard29 CFR 1910.1200. Standard must beconsulted for specific requirements.IDENTITY (As Used on Label and List)ARDEX 8+9 (PART 8 - LIQUID)Section IManufacturer’s NameARDEX ENGINEERED CEMENTSAddress (Number, Street, City, State and Zip Code)400 Ardex Park DriveAliquippa, PA 15001U.S.A.U.S. Department of LaborOccupational Safety and Health Administration(Non-Mandatory Form)Note: Blank spaces are not permitted. If any item is not applicable, or noinformation is available, the space must be marked to indicate that.Emergency Telephone Number(800) 255-3924Telephone Number for Information(724) 857-6400Date Prepared01/30/04Signature of Preparer (Optional)Section II – Hazardous Ingredients/Identity InformationOther LimitsHazardous Components (Specific Chemical Identity: Common Name(s)) OSHA PEL ACGIH TLV Recommended % (optional)100% MAX VINYL ACETATE COPOLYNER 24937-78-8 10PPMSection III – Physical/Chemical CharacteristicsBoiling Point N/A Specific Gravity (H 2O = 1) 1.2Vapor Pressure (mm Hg) N/A Melting Point N/AVapor Density (AIR = 1) N/A Evaporation Rate (Butyl Acetate = 1) N/ASolubility in Water LESS THAN 50g/1000 cm 3Appearance and OdorLIGHT PINK IN COLOR - AROMATICSection IV – Fire and Explosion Hazard DataFlash Point (Method Used)NON-FLAMABLEExtinguishing MediaFlammable LimitsNON-FLAMMABLELELN/AWILL NOT BURNSpecial Fire Fighting ProceduresNONEUnusual Fire and Explosion HazardsNONE REQUIRED WITH RESPECT TO THIS PRODUCTUELN/A(Reproduce Locally) OSHA 174, July 2006

Ardex 8+9 (Part 8 - Liquid) - Page 2Section V – Reactivity DataStabilityUnstableStableIncompatibility (Materials to Avoid)NONEHazardous Decomposition or ByproductsNONEHazardousMay OccurConditions to AvoidNONEConditions to AvoidPolymerization Will Not Occur NONESection VI – Health Hazard DataRoute(s) of Entry Inhalation? Skin? Ingestion?NONE NONE DO NOT INGESTHealth Hazards (Acute and Chronic)NONECarcinogenicity: NTP? NONE IARC Monographs? NONE OSHA Regulated? NOSigns and Symptoms of ExposureNONEMedical Conditions Generally Aggravated by ExposureNONEEmergency First Aid ProceduresSKIN: WASH WITH SOAP & WATER. EYES: FLUSH WITH WAER. INHALATION: REMOVE TO FRESH AIR. Section VII – Precautions for Safe Handling and UseSteps to Be Taken in Case Material is Released or SpilledTAKE UP WITH LIQUID ABSORBING MATERIAL. DO NOT FLUSH INTO SEEWERS OR PUBLIC WATERWAYS.Waste Disposal MethodDISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE/PROVINCIAL AND FEDERAL REGULATIONS.Precautions to Be Taken in Handling and StoringPROTECT FROM FREEZING.Other PrecautionsNONESection VIII – Control MeasuresRespiratory Protection (Specify Type)VentilationProtective GlovesLocal ExhaustAS NEEDEDMechanical (General)NONEYESOther Protective Clothing or EquipmentWork/Hygienic PracticesNIOSH APPROVED RESPIRATOR IF REQUIRED.SpecialNONEOtherNONEEye ProtectionYESNONEAFTER WORK, WASH HANDS WITH SOAP AND WATER.

Material Safety Data SheetMay be used to comply withOSHA’s Hazard Communication Standard29 CFR 1910.1200. Standard must beconsulted for specific requirements.IDENTITY (As Used on Label and List)ARDEX 8+9 (PART 9 - POWDER)Section IManufacturer’s NameARDEX ENGINEERED CEMENTSAddress (Number, Street, City, State and Zip Code)400 Ardex Park DriveAliquippa, PA 15001U.S.A.U.S. Department of LaborOccupational Safety and Health Administration(Non-Mandatory Form)Note: Blank spaces are not permitted. If any item is not applicable, or noinformation is available, the space must be marked to indicate that.Emergency Telephone Number(800) 255-3924Telephone Number for Information(724) 857-6400Date Prepared01/30/04Signature of Preparer (Optional)Section II – Hazardous Ingredients/Identity InformationOther LimitsHazardous Components (Specific Chemical Identity: Common Name(s)) OSHA PEL ACGIH TLV Recommended % (optional)50% MAX QUARTZ 14808-60-7 .05 MG/M 3 .1 MG/M 340% MAX PORTLAND CEMENT 65997-15-1 10 MG/M 3 10 MG/M 345% CALCIUM CARBONATE 1317065-3 N/A 30 MPPCF20% MAX VINYL ACETATE COPOLYMER 24937-78-8 10 MG/M 3 10 MG/M 3Section III – Physical/Chemical CharacteristicsBoiling Point N/A Specific Gravity (H 2O = 1) 1.2Vapor Pressure (mm Hg) N/A Melting Point N/AVapor Density (AIR = 1) N/A Evaporation Rate (Butyl Acetate = 1) N/ASolubility in WaterLess than 50g/1000 cm 3Appearance and OdorFine Gray Powder - OdorlessSection IV – Fire and Explosion Hazard DataFlash Point (Method Used)Flammable LimitsNON-FLAMMABLENON-FLAMMABLEExtinguishing MediaWILL NOT BURNSpecial Fire Fighting ProceduresNONEUnusual Fire and Explosion HazardsNONE REQUIRED WITH THIS PRODUCTLELN/AUELN/A(Reproduce Locally) OSHA 174, July 2006