Component Cabinet Systems - Robot Building Supplies

DLX 

decorative materials 

Component Cabinet Systems 

Innovation... imagination... inspiration... creation.

Contents 

Page 

Why use kitchen component systems? 1 

Kitchen component help sheet 2 

Accessories/Hardware and custom built accessories 5 

Wardrobes 6 

Vanities & File draws 7 

Sample kitchen layout 8 

Kitchen cabinet elevation 9 

Kitchen perspective 10 

Customer layout 11 

Specifications 

Standard base units 12 

Narrow base units 13 

Drawer modules 14 

Miscellaneous base modules 15 

Standard overhead units 16 

Medium overhead units 17 

Tall overhead units 18 

Pantries, Appliance & Broom cupboards 19 

Vanity and Filing units 20 

Wardrobe inserts 21 

Doors, Benchtops & Hardware 22 

Order Form 23

Why use kitchen component systems? 

� Price: Cutting and edging standard panel sizes in large quantities 

allows for a labour saving of about 60%. This saving is reflected in the 

final cost. 

� Availability: All units in standard sizes are available off the shelf. 

Processing down time is eliminated. 

� Efficiency: The cutting of panels from full sheets is precisely 

optimised. Wastage of material is minimal. The pre-cut, edged and 

drilled panels save a substantial amount of on-site time. This can 

mean a reduction in staff costs or the option of taking on more work – 

or both. 

� Business made simple: No need to tie up large amounts of cash 

and storage in stock. The need for expensive machinery is 

eliminated. Quoting a kitchen component system is fast, simple and 

highly accurate. No guesswork or cutting lists required. Spend less 

time on tasks that earn you no money, and more time on the ones 

that do. 

� Flexibility: The range of standard modules is large. This allows for 

flexible design options. In the event that a non-standard module is 

required, custom work can be carried out within a relatively fast time 

frame. With complete flexibility in mind, the panels were designed to 

be universal – they are compatible with a large range of hardware. 

� Quality: All modules are made from highly moisture resistant white 

melamine. All horizontal panels are edged in a durable 2mm PVC 

rigid edge. All shaped panels are edged in 3mm T-Mould edging. 

Included is all drilling and pre drilling required, system 32 inclusive. All 

carcasses are manufactured with solid backs and modules can be 

mounted with either the plinth system (option al extra) or with plastic 

legs (standard). 

� Guarantee: All materials, labour and hardware provided are covered 

by a replacement guarantee. All staff involved in the production of 

kitchen component systems have been trained to provide the best 

product possible. Should any product fall below standards or 

expectations, it will be promptly replaced free of charge. We look 

forward to providing you with a top quality product. 

1

Kitchen components help sheet 

Thank you for selecting a kit kitchen system. We have listed a few 

simple tips to ensure you avoid some common pitfalls when designing 

and installing your kitchen. 

� Accurately measure the room, including positions of doors, windows, 

plumbing and power (use millimetres). 

� Determine how out-of-square the floor plan and walls are. 

� Transfer these measurements to the graph sheet provided in this 

brochure. One square equals 100mm. Refer to the sample layout for 

an example. 

� Depending on the squareness factor, allow a small amount of 

clearance behind carcass modules when determining overall carcass 

dimensions (see note on benchtop calculations(below) regarding 

carcass back clearance). 

� Note: all base corner cupboards are manufactured with 16mm back 

clearance to compensate for out of square kitchens. 

� Determine the position of non-variable modules as the position of 

some modules cannot easily be changed. Also consider the position 

of plumbing and waste pipes, windows, etc. 

� Aim for around a meter and a half between kitchen workstations (the 

triangle of stove, sink and fridge). 

� Try to place corner units into all corners to avoid blind ‘dark hole’ 

corners. Some blind corners may be accessible from behind an island 

bar. 

� Corner units: Where standard 900 corner units do not fit, “odd leg” 

units can be very handy. These are also reversible ie: LH or RH legs. 

� Try to avoid placing drawer units and dishwashers directly into corner 

locations. 

2

� Make allowance for fridge doors to open around 120 degrees for easy 

removal of crispers, noting if door opens left or right. When placing 

fridges adjacent to other cupboards, ensure fridge doesn’t interfere 

with other cupboard doors; a back clearance may be required to allow 

this. 

� Locate modules in logical, sensible positions eg. pot drawers near 

oven or stove, cutlery drawer near sink or servery, etc. 

� Cooktops should be placed clear of end panels and usually require 

provision of rangehood unit above. Be sure to note the minimum 

clearance required by legislation above your particular cooktop 

(usually 600 mm electric, 650 mm gas), and whether rangehood 

ventilation is to be through the top, the rear or recirculated. We 

recommend a clearance of 700mm between cooktops and overhead 

cupboard doors. 

� Make sure the sink module is wide enough to accommodate both 

bowls, ensure that waste pipes are accessible and consider whether 

taps are wall or sink mounted. 

� Wall ovens and microwave ovens should not be placed too high; 

around 1300 mm is considered safe. 

� When designing small kitchens, where space is limited, consider 

using space saving appliances such as pull out pantries, pull out 

corner shelves, lazy susans etc. 

� Where the kitchen layout changes from base units, with cupboards 

over, to tall cupboards, a seen end (coloured) panel will be necessary 

to start the run of tall cupboards. 

� Remember to allow for the thickness of these “seen” panels when 

calculating overall dimensions. 

� Avoid deep shelves above eye level. These tend to accumulate nonaccessible 

items. 

� Full width shelves in base and corner cupboards make the rear of the 

bottom shelf difficult to see. 

� Make sure you have not forgotten the overhead cupboards. 

3

� Consider ventilation of fridge, wall oven units and rangehood 

cupboards. When placing overhead units above them, reduce the 

depth of these units to allow for airflow. Before purchasing 

appliances, ensure they will fit into your system. Technical brochures 

are available upon request. 

� Do not place carcass modules next to a wall without a small infill 

panel. 

� Post-formed bench tops may need to be 10 mm deeper if back 

clearance is required. 

� Large radius post-formed bench tops may need to be 10 mm deeper 

to conceal the tops of under-bench cupboard doors. 

� Try to keep door sizes below 500 mm wide. Use extra door with 

mullion fitted or 2 doors. 

� Door sizes listed are finished sizes, consult our advisers for 

allowance for door edging if required, prior to cutting door panels. 

4

Accessories Available 

Lazy Susans; 

Rubbish bins (flip top, pull out, door mounted) 

Wire baskets and racks 

Pullout pantries 

Towel rails 

Doors (fold away, bi-fold, flap and roller) 

Ironing boards 

Sinks. 

Hardware Available 

Drawer runners 

Hinges 

Screws 

Glue (AV56) 

Connectors (benchtop and carcass) 

Shelf supports 

Plastic adjustable legs 

Buffer pads 

Piano hinge 

Corner Cabinets 

Magnetic catches 

T2 connectors 

Cover caps 

5mm caps 

Figure 8 connectors 

Capping mould 

Custom Built Accessories 

Overhead end open shelf units 

Base unit end shelves 

Bench-top up-stands with bar tops 

Waterfall ends 

45 degree overhead and base units. 

5

Wardrobes 

Our wardrobe range consists of a suite of units 458 wide x 445 deep. 

The range comprises a number of draw/basket units either 800 or 1000 

high and hanging units 1750 high, with draws and/or baskets 

underneath. The low units are constructed with tops and the high units 

without, though tops are available. 

A typical arrangement is as follows. For details, see the relevant section 

of the catalogue. 

As with all our kits, the standard configuration can be modified to suit 

your requirements. 

6

Vanities and File Draws 

Vanities 

Our vanities are 460 deep x 610 high and come in a range of sizes from 

300 wide to 500 wide. Vanity units are available either in three draw or 

single door configuration. Like our kitchen cabinets, prices do not 

include draw fronts, doors or end (seen) panels. 

Our range of vanities is designed to be floor mounted. They can be 

modified to be wall mounted in “floating” format. 

A variety of tops is available for the vanities. 

A typical vanity layout is as follows: 

38 

610 

As with all our kits, the standard vanity units can be modified to suit your 

particular requirements. 

File Draws 

450 

Our file draws are 560 deep x 612 high x 468 wide. They are available 

with either two file draws or one file draw and two standard draws per 

unit. The units are designed to be built into a run of cabinets. If the 

units are to stand alone, top and end panels are required. Prices do not 

include draw fronts. File draws can be supplied with or without castors. 

Again, file draws can be modified to suit your particular requirements. 

200 

100 

7

3766 

2416 750 600 

1000 16 800 600 450 900 

SAMPLE KITCHEN LAYOUT 

OHCNR600 

OH750 

OH800 RHOH600 

DS450 

3DPS800 

PCNR1000 

BCNR900 

Seen panel 

2816 

600 2216 

900 1000 900 16 

B1000 

Seen panel 

FOH700 

Seen panel 

BCNR900 

DW 

DS500 

600 

500 

Seen panel 

8

1016 

KITCHEN CABINET ELEVATION 

2416 750 600 

800 

NOTE: THE MINIMUM DISTANCE BETWEEN 

COOKTOP AND RANGEHOOD IS SET BY 

LEGISLATION, BUT IS USUALLY 600mm FOR 

ELECTRIC AND 650mm FOR GAS COOKTOPS. 

WE RECOMMEND A 700mm CLEARANCE 

BETWEEN COOKTOP AND OVERHEAD CUPBOARD 

DOORS 

600 

450 

900 

180 

720 

700 

35 

720 

145 

9

USE THIS PAGE TO LAY OUT YOUR KITCHEN 

SUGGESTED SCALE IS 1 BOX = 100mm 

11

catalogue 

STANDARD BASE UNITS (720 h x 560 d) 

NOTE: Carcass, screws, adjustable feet and shelf supports included 

Doors, hinges, handles not included 

All units are fitted with an adjustable 530 deep shelf 

All units are fitted with solid white HMR backs. 

DOOR DIMENSIONS 

CODE UNIT WIDTH QTY. HEIGHT WIDTH 

B300 300 1 717 297 

B350 350 1 717 347 

B400 400 1 717 397 

B450 450 1 717 447 

B500 500 1 717 497 

B550 550 1 717 547 

B600 600 1 OR 2 717 597 / 297 

B650 650 2 717 322 

B700 700 2 717 347 

B750 750 2 717 372 

B800 800 2 717 397 

B850 850 2 717 422 

B900 900 2 717 447 

B950 950 2 717 472 

B1000 1000 2 717 497 

B1050 1050 2 717 522 

B1100 1100 2 717 547 

B1150 1150 2 717 572 

B1200 1200 2 OR 3 717 597 / 397 

B1300 1300 3 717 430 

B1400 1400 3 717 463 

B1500 1500 3 717 497 

B1600 1600 3 717 530 

B1700 1700 3 717 563 

B1800 1800 3 OR 4 717 597 / 447 

* For all sizes below the line, add a mullion if required (687 x 92 x 16 mm White 

HMR edged 2 long) 

* Shelving above 900 in width may require extra support or thicker material to avoid sag 

* Door sizes can be increased by 1mm if very small clearances are required 

but the door size may have to be reduced where doors meet at an angle 

STANDARD BASE CORNER UNITS 

900 std odd leg 

long leg 

BCNR900 900 x 900 2 717 See 

BCNR1000 800 x 1000 2 717 Formula 

BCNR1200 900 x 1200 3 717 

* Both the 1000 x 800 & the 1200 x 900 can be reversed to make right or left hand units. 

They can also be modified in length to suit specific requirements. 

* Base corner units have a 16mm void at the back to allow for out of square walls 

* In order to have good access to the corner cupboard, the sum of the two back measurements 

needs to be greater than 1800mm, ie: 800 + 1000, 900 + 900 

* 900 x 1200 corner units should be fitted with 3 doors (1 pair of bi-fold doors 

plus 1 single door). The weight of a large bi fold door may sag the hinges. 

* For door sizes use formula: 

Carcass width less carcass depth less 4mm corner gap less door thickness 

ie, for BCNR1200, 900 x 1200 with 16mm thick doors: 

900 leg door = 900 - 560 - 4 - 16 = 320 wide 

1200 leg door = (1200 - 560 - 4 - 16 - 3mm gap between pair)/2 = 308 wide 

* When ordering profiled edge doors for corner cabinets, the two adjoining door sides need to be 

orded as square 90 degree edges or very small pencil round edges. 

* When assembling corner units the adjustable shelf must be placed inside the unit prior to the last 

back panel being fitted. 

12

catalogue 

NARROW BASE UNITS (720 h x 450 d) 






CODE WIDTH QTY. HEIGHT WIDTH 

BN300 300 1 717 297 

BN350 350 1 717 347 

BN400 400 1 717 397 

BN450 450 1 717 447 

BN500 500 1 717 497 

BN550 550 1 717 547 

BN600 600 1 OR 2 717 597 / 297 

BN650 650 2 717 322 

BN700 700 2 717 347 

BN750 750 2 717 372 

BN800 800 2 717 397 

BN850 850 2 717 422 

BN900 900 2 717 447 

BN950 950 2 717 472 

BN1000 1000 2 717 497 

BN1050 1050 2 717 522 

BN1100 1100 2 717 547 

BN1150 1150 2 717 572 

BN1200 1200 2 OR 3 717 597 / 397 

BN1300 1300 3 717 430 

BN1400 1400 3 717 463 

BN1500 1500 3 717 497 

BN1600 1600 3 717 530 

BN1700 1700 3 717 563 

BN1800 1800 3 OR 4 717 597 / 447 

* For all sizes below the line, add a mullion if required (688 x 92 16 mm 

White HMR edged 2 long) 

* Shelving above 900 in width may require extra support or thicker material to avoid sag. 

* Sizes of the above doors can be increased by 1mm if very small clearances are required 

but the door size may have to be reduced where doors meet at an angle. 

NARROW BASE CORNER UNITS 

standard odd leg 

BNCNR800 800 X 800 2 717 See 

BNCNR1200 800 X 1200 3 717 Formula 

*The 800 x 1200 unit can be modified to suit corner. Eg. Either leg of this unit can be 

reduced in length or rotated to suit the application. 

* Narrow base corner units have a 16mm void at the back to allow for out of square walls 

* In order to have good access to the corner cupboard, the sum of the two back measurements 

needs to be greater than 1600mm, ie: 800 + 800, 800 + 1200 





ie, for BCNRN1200, 800 x 1200 with 16mm thick doors: 

800 leg door = 800 - 450 - 4 - 16 = 330 wide 


* When ordering profiled edge doors for corner cabinets, the two adjoining door corners 

need to be orded as square 90 degree edges, or with small pencil round edges. 

* When assembling corner units the adjustable shelf must be placed inside the unit prior to the last 

back panel being fitted. 

13

catalogue 

DRAWER MODULES (720 h x 560 d) 

NOTE: Carcass, screws, adjustable feet and drawer runners included 

Drawer fronts, handles not included 

All drawer units are fitted with a solid white HMR back. 

STD 4 Draw Units 

Option 1 Quality runners and solid 16mm HMR drawers (DS drawers) 

Option 2 Metal sided draws with integral runners (DM drawers) 

Option 3 Soft close drawers (DC drawers) 

WIDTH CODE CODE CODE No. OF DRAW 

SOLID METAL SOFT DRAWS FRONTS 

CLOSE 

400 DS400 DM400 DC400 4 177 X 397 

450 DS450 DM450 DC450 4 177 X 447 

500 DS500 DM500 DC500 4 177 X 497 

550 DS550 DM550 DC550 4 177 X 547 

600 DS600 DM600 DC600 4 177 X 597 

NOTE: - When specifying drawer fronts ensure grain direction (if applicable) 

is listed as the first dimension or if cut from one piece 

- Cutlery tray is available in 400, 450 and 500 widths 

- Full extension runners are available for solid drawers. 

- All 16mm solid HMR drawers come pre assembled. 

- Soft closer drawers use the Harn "Triomax" system 

Pot draw units 

* Available in same three options as above 

* Available in both 3 drawer configuration and 2 drawer configuration 

* 3 Draw units have two bottom draws at 267mm and one top draw at 177mm 

* 2 Draw units have two draws at 357mm 

SOLID METAL 

SOFT CLOSE 

CODE CODE CODE CODE CODE CODE 

WIDTH 2 DRAW 3 DRAW 2 DRAW 3 DRAW 2 DRAW 3 DRAW 

450 2DPS450 3DPS450 2DPM450 3DPM450 2DPC450 3DPC450 












NOTE: - If narrow units are required in any of the above drawer systems please add the letter 

"N" to the code number (eg. 3DPSN450). 

- Full extension drawer runners are available for solid drawers, 

and are recommended for units above 900 width. 

- All 16mm solid HMR drawers come pre assembled. 

- For pot drawers positioned below under bench oven modules see section miscellaneous 

base modules and see UBO1P (under bench oven unit) 

- Soft closer drawers use the Harn "Triomax" system 

14

catalogue 

MISCELLANEOUS BASE MODULES 

NOTE: Carcass, screws, adjustable feet and shelf supports/drawer runners included 

Handles, doors and/or drawer fronts not included 

Prices do not include seen panels 

Under Bench Oven Code: UBO 

Note: Standard B600 Base Unit with extra base and 

a small back 

Under Bench Oven with single Pot Drawer Code: UBO1P 

Note: As above but with one pot drawer 

Wall Oven Module (Tall) 

Options: 

2 pot draws, 1 overhead cupboard and 1 oven cavity. Code: WO2P 

1 pot draw, 1 overhead cupboard, 1 microwave and 1 oven cavity. Code: WO1P 

1 base cupboard, 1 overhead cupboard, and 1 or 2 oven cavities. 

Modify height of base unit accordingly. Code: WO1B 

Notes: - End panels on all of the above units may need to be seen panels, 

and the price will vary according to the material used. 

- Wall oven overhead units have the same configuration as fridge 

overhead units. 

- It is important to leave a cavity behind and above wall oven modules. 

- Wall oven units consist of two tall end panels with a separate base or 

drawer unit and over head unit 

Fridge Enclosure and Overhead Units 450 mm deep x 500 high 

This module consists of 2 tall end panels, usually seen panels, and a 450 deep overhead unit 

The overhead unit is fitted to the front leaving an air cavity at the back for fridge ventilation 

CODE WIDTH CODE WIDTH 

FOH600 600 FOH850 850 

FOH650 650 FOH900 900 

FOH700 700 FOH950 950 

FOH750 750 FOH1000 1000 

FOH800 800 

Range hood Overhead Units 300 Deep 

CODE WIDTH 

RHOH600 600 

RHOH900 900 

Notes: - Height of rangehood units will vary according 

to height of rangehood 

15

catalogue 

STANDARD OVERHEAD UNITS (300 Deep) 

NOTE: These units have a standard height of 720mm. 

Carcass, screws and shelf supports included 




CODE WIDTH DOOR QTY. HEIGHT WIDTH 

OH250 250 1 720 247 

OH300 300 1 720 297 

OH350 350 1 720 347 

OH400 400 1 720 397 

OH450 450 1 720 447 

OH500 500 1 720 497 

OH550 550 1 720 547 

OH600 600 1 OR 2 720 597 / 297 

OH650 650 2 720 322 

OH700 700 2 720 347 

OH750 750 2 720 372 

OH800 800 2 720 397 

OH850 850 2 720 422 

OH900 900 2 720 447 

OH950 950 2 720 472 

OH1000 1000 2 720 497 

OH1050 1050 2 720 522 

OH1100 1100 2 720 547 

OH1150 1150 2 720 572 

OH1200 1200 2 OR 3 720 597 / 397 

* For all sizes below the line,add a mullion if required 

(687 x 92 x 16 mm White HMR edged 2 long). 

* shelving above 900 in width may require extra support or thicker material to avoid sag 

(no drilling provided in mull.ion or back for shelf supports). 

CORNER OVERHEAD UNITS 

Corner overhead 600 corner overhead 900 x 600 

OHCNR600 600x600 2 720 See 

OHCNR900 900x600 3 720 Formula 





ie, for OHCNR900, 900 x 600 with 16mm thick doors: 

600 leg door = 600 - 300 - 4 - 16 = 280 wide 


* When ordering profiled edged doors for corner cabinets, the two adjoining door corners 

need to be ordered as square 90 degree edges or small pencil round edges. 

* An optional overhead end is available with extra adjustable shelf holes 

* Fit shelf prior to fitting solid back 

16

catalogue 

MEDIUM OVERHEAD UNITS (300 Deep) 

NOTE: These units come in heights up to 900mm. 



All units are fitted with two adjustable 270 deep shelves 



OHM250 250 1 900 247 

OHM300 300 1 900 297 

OHM350 350 1 900 347 

OHM400 400 1 900 397 

OHM450 450 1 900 447 

OHM500 500 1 900 497 

OHM550 550 1 900 547 

OHM600 600 1 OR 2 900 597 / 297 

OHM650 650 2 900 322 

OHM700 700 2 900 347 

OHM750 750 2 900 372 

OHM800 800 2 900 397 

OHM850 850 2 900 422 

OHM900 900 2 900 447 

OHM950 950 2 900 472 

OHM1000 1000 2 900 497 

OHM1050 1050 2 900 522 

OHM1100 1100 2 900 547 

OHM1150 1150 2 900 572 

OHM1200 1200 2 OR 3 900 597 / 397 






corner overhead 600 corner overhead 900 x 600 

OHCNRM600 600x600 2 720 See 

OHCNRM900 900x600 2 720 Formula 

* extra shelves 

not shown 





ie, for OHCNRM900, 900 x 600 with 16mm thick doors: 

600 leg door = 600 - 300 - 4 - 16 = 280 wide 






17

catalogue 

TALL OVERHEAD UNITS (300 Deep) 

NOTE: These units come in heights up to 1200mm. 



All units are fitted with three adjustable 270 deep shelves 



OHT250 250 1 1200 247 

OHT300 300 1 1200 297 

OHT350 350 1 1200 347 

OHT400 400 1 1200 397 

OHT450 450 1 1200 447 

OHT500 500 1 1200 497 

OHT550 550 1 1200 547 

OHT600 600 1 OR 2 1200 597 / 297 

OHT650 650 2 1200 322 

OHT700 700 2 1200 347 

OHT750 750 2 1200 372 

OHT800 800 2 1200 397 

OHT850 850 2 1200 422 

OHT900 900 2 1200 447 

OHT950 950 2 1200 472 

OHT1000 1000 2 1200 497 

OHT1050 1050 2 1200 522 

OHT1100 1100 2 1200 547 

OHT1150 1150 2 1200 572 

OHT1200 1200 2 OR 3 1200 597 / 397 






Corner overhead 600 corner overhead 900 x 600 

OHCNRT600 600x600 2 720 See 

OHCNRT900 900x600 2 720 Formula 

* extra shelves 

not shown 





ie, for OHCNRT900, 900 x 600 with 16mm thick doors: 

600 leg door = 600 - 300 - 4 - 16 = 280 wide 






18

catalogue 

PANTRIES AND CUPBOARDS 



All units are fitted with 543 deep shelves 


STANDARD PANTRY 

2175 X 580 * All standard pantries come with 4 adjustable 

CODE WIDTH shelves and 1 fixed shelf. 

PST600 600 * Pantries over 700mm in width may require 

PST650 650 thicker shelving to support load. 

PST700 700 * Shaped shelves are available 

PST750 750 * Standard pantries are also available with solid 

PST800 800 drawers 

PST850 850 

PST900 900 

PST950 950 

PST1000 1000 

CORNER PANTRY 

2320 X 580 Corner pantry 

CODE WIDTH has a 16mm void 

PCNR1000 1000X1000 at both backs to 

* When installing the corner pantry unit, it is imperative that the lower allow for out of 

adjustable shelf is placed inside the unit prior to installing the fixed shelf square walls 

BROOM CUPBOARDS 

2175 X 580 

STANDARD 

DIVIDED 

BROOM C/B 

BROOM C/B 

CODE WIDTH CODE 

BC400 400 - 

BC500 500 - 

BC600 600 - 

BC700 700 BCD700 

BC800 800 BCD800 

BC900 900 BCD900 

BC1000 1000 BCD1000 

BC1100 1100 BCD1100 

BC1200 1200 BCD1200 

* All broom cupboards are made with 1 full width fixed shelf and divided units 

come with 3 other smaller adjustable shelves down one side. 

* When ordering divided units be sure to specify which side to have the shelves. 

APPLIANCE / MICROWAVE CUPBOARD STANDARD BASE UNIT WITH SINGLE DRAWER 

1420 X 450 

CODE WIDTH CODE WIDTH 

A400 400 BD400 400 

A450 450 BD450 450 

A500 500 BD500 500 

A550 550 BD550 550 

A600 600 BD600 600 

A650 650 

A700 700 

A750 750 

A800 800 

* All App/Micro. Cupboards come with 2 adjustable shelves. *This unit is the same as a standard base unit 

and one fixed shelf 430 deep with pre-drilled holes for one drawer. 

* Appliance cupboards may also incorporate a microwave *Prices include standard runners. 

and roller shutter. 

* If a roller shutter is fitted , the shelves are 400 deep to 

accommodate the roller shutter mechanism 

19

catalogue 

VANITY & FILE DRAW UNITS 

NOTE: Carcass, screws, adjustable feet and shelf supports/drawer runners included 



VANITY UNITS (610 h x 460 d) 

VANITY BASE UNITS 

NOTE: All units are fitted with a 433 deep shelf as standard, 


CODE WIDTH QTY. HEIGHT WIDTH 

VB300 300 1 457 297 

VB350 350 1 457 347 

VB400 400 1 457 397 

VB450 450 1 457 447 

VB500 500 1 457 497 

VB550 550 1 457 547 

VB600 600 1 457 597 

VANITY DRAW UNITS 

No. OF DRAW 

CODE WIDTH DRAWS FRONTS 

VDS300 300 3 200 X 297 

VDS350 350 3 200 X 347 

VDS400 400 3 200 X 397 

VDS450 450 3 200 X 447 

VDS500 500 3 200 X 497 

VDS550 550 3 200 X 547 

VDS600 600 3 200 X 597 

FILE DRAW UNITS (665 h x 468 w x 560 d) 

Option 1 1 file draw and 2 standard draws 

Option 2 2 file draws 

No. OF DRAW 

CODE OPTION DRAWS FRONTS 

DF300 3-draw 2 @ 150 X 465 

1 @ 303 X 465 

DF200 2-draw 2 @ 303 X 465 

* Full extension runners are available 

* Units available with or without castors 

20

catalogue 

WARDROBE UNITS (458 w x 445 d) 

NOTE: Units made without backs. Tall units have no tops. 

Standard solid draws are "V-wrap" draws: draw fronts are optional 

Available in: 

3- & 4-draw low units with either solid or wire drawers 

3- & 4-draw tall units with either solid or wire drawers, 1 fixed shelf and 3 or 2 adjustable shelves 

No of DRAW 

CODE DRAWS TYPE HEIGHT 

R3B80 3 Wire 800 

R3D80 3 Solid 800 

R4B100 4 Wire 1000 

R4D100 4 Solid 1000 

R3B175 3 Wire 1750 

R3D175 3 Solid 1750 

R4B175 4 Wire 1750 

R4D175 4 Solid 1750 

R3D80 

Example Combination: 

R3B175, R3D80, R4B100, R4D175 

R4B100 

* Chrome rods and end flanges available 

* Tops available for tall units 

R4D175 

R3B175 

21

catalogue 

DOORS, BENCHTOPS & HARDWARE 

DOORS AND DRAW FRONTS 

We supply doors and drawer fronts in the following finishes: 

- Melamine, with melamine or ABS edging 

- Vinyl-wrap in textured, matt, gloss and premium gloss finish 

- 2-pack 

- Solid and veneered timber 

- Metal sided 

- Others on request 

We also supply end panels to match. 

BENCHTOPS 

We supply a range of benchtops including: 

HARDWARE 

Budget range of worktops in 600mm and 900mm width 

Postformed laminate from all the major laminate suppliers 

Manufactured stone 

Natural stone 

Others on request. 

A full range of cabinet making hardware is available, including: 

- Hinges 

- Screws 

- Draw runners, including Hettich, Harn metal sided draws, full extension, 

heavy duty, Harn soft close etc 

- Soft close door attachments 

- Wardrobe rails and fixing systems 

- Brackets 

- Kitchen accessories, including: pull out pantry, lazy susan, pull out bin, 

cutlery tray, etc 

- Handles 

- Cabinet supports 

22

Customer Order Form 

Component Kitchen System - Standard Kits Only 

Customer: ABN: 

Address: Order Date: 

Date Req: 

Phone: Order No: 

Fax: Delivery (Y/N): 

Code No Quantity Price Extended Code No Quantity Price Extended 

(List) (QTY x List) (List) 

Carried over 

(QTY x List) 

Total this column 

All prices quoted in price list do not include GST. 

Delivery Charges apply. 

Prices are subject to change without notice. 

Total 

Freight 

GST 

Total 

23

DLX 

decorative materials 

MORE CHOICES 

BETTER PRICES 

DROMANA 

2-6 June Avenue 

5987 1166 

ROBOT’s got it!TM 

www.robotbuildingsupplies.com.au 

NOTTING HILL 

326-342 Ferntree Gully Rd 

9543 3666 

Corrugated Roofing, 

Polycarb, Purlins, Fence 

Panels, Wire Fencing, 

Starposts, MDF, Particle 

Board, Insulation, 

Tubing, Pipe, RHS, 

Sleepers, Merbau Deck, 

H&C Beams, Treated 

Pine, Shelving 

and lots, lots more. 

SSUNSHINE 

596 Ballarat Rd 

9363 0666 

PRESTON 

60 Chifley Drive 

9487 9700 

OPENING HOURS: Mon to Fri 7.30am-5pm (Notting Hill open 7am Mon to Fri) Sat 8am-12.30pm

Component Cabinet Systems - Robot Building Supplies

Create successful ePaper yourself

Delete template?

Save as template?