Full Scale Load Testing BPEX Project, Maptaphut Rayong

More documents

Recommendations

Info

FIGURE 9. INSTRUMENTATION SETUPFIGURE 10. DATA ACQUISITION SYSTEM10
3.2 CRACK MONITORINGA survey telescope was utilized to monitor any possible cracks that occurred in thetested member during load testing, as shown in Figure 11.FIGURE 11. MONITORING OF CRACK BY SURVEY TELESCOPE4 EVALUATION OF MEMBER CAPACITYPrior to the load testing, 3‐dimensional finite element analysis of the structure, asshown in Figure 12, was conducted to evaluate the forces in various members andcompared with the member’s capacity. Two models were considered, one is themodel with uniformly distributed load acting on the slabs as typically assumedduring the design stage. The aim is to evaluate whether the members were properlydesigned according to the ACI 318‐08 gravity load combinations. The other model isthe one with the same load configurations as tested to evaluate the forces occurringduring the test and to predict the structure’s response under test. The moment andshear forces at critical sections for different load combinations are summarized inTable 2. Due to the configuration of the test load, the moment and shear producedby the load test at critical section were slightly larger than those produced by havingthe design live load (500 kg/m 2 ) acting uniformly on the slab.11
Page 1 and 2: Full‐Scale Load Testing ofSelecte
Page 3 and 4: EXECUTIVE SUMMARYThis report provid
Page 5 and 6: LIST OF FIGURESFigure 1. Test struc
Page 7 and 8: Full‐Scale Load Testing of Select
Page 9 and 10: emoved. The second test may be cons
Page 11 and 12: TABLE 1. COMPRESSIVE STRENGTH FROM
Page 13 and 14: FIGURE 5. STEEL LOAD PLATFORMFIGURE
Page 15: 3 INSTRUMENTATIONS AND MEASUREMENTS
Page 19 and 20: The predicted deflection at various
Page 21 and 22: 5 LOAD TESTING RESULTS5.1 DEFLECTIO
Page 23 and 24: 5.2 DAMAGESDuring the testing, exis
Page 25 and 26: FIGURE 18. INTERFACE SHEAR CRACK6 C
Page 27 and 28: 9 APPENDIX: MOMENT CURVATURE ANALYS
Page 29 and 30: 318.1116.1202C cAll dimension are i

Full Scale Load Testing BPEX Project, Maptaphut Rayong

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?