KSU-II K-TRON Product Specification K-Tron Single Unit Display II S ...

KCMCAUTION - Disconnect power before opening.115/230 VAC 50/60 HZ, 2000 Watts (Max)KCMCAUTION - Disconnect power before opening.115/230 VAC 50/60 HZ, 2000 Watts (Max)KCMCAUTION - Disconnect power before opening.115/230 VAC 50/60 HZ, 2000 Watts (Max)KCMCAUTION - Disconnect power before opening.115/230 VAC 50/60 HZ, 2000 Watts (Max)K-TRON Product SpecificationK-Tron Single Unit Display IIKSU-IIBACDExt. communication to Host SystemA FeederB Weighing SystemC Control ModuleD Operator InterfaceEach K-TRON weigh feeder consistsof the components A, B, C and D.Component D is specified here.DescriptionThe K-Tron Single Unit Display II (KSU-II) is an additional userinterface for use with the KCM. It can be used as a portable displayfor maintenance or configuration in systems where feeders have nobuilt-in user interface.The KSU-II is designed to interface with one or more K-Tron ControlModules (KCM). This compact unit may be mounted directly atthe feeder or other convenient location. It interfaces with the KCMvia an RS485 bus and may be run up to 500 m (1640 ft).In addition, the KSU-II is a handy and powerful tool for maintenanceand configuration of larger feeder systems. It may accessany single feeder from any location on the network and it is hotpluggable.Signal lampsLCD-display(4 bands)Key touchpad forentering and programmingInstallationInstallation is simple. If mounted within 100 m (330 ft) of the KCM,the KSU-II may be powered by the KCM. For distances between100 and 500 m (330 and 1640 ft) an external power source isneeded.Film keyboardOperationFunction keys are marked with easily recognized symbols and text.From the Home Page, the operator can view the feeder’s operationalstatus and main process parameters. Pressing the NEXT keyscrolls down one line. The status line remains visible, while thetop parameter line scrolls off screen and a new line appears at thebottom.GRAV LOCAL REFILL LWFSetpoint0.000 kg/hMassflow0.000 kg/hNet weight 0.000 kgSpeed0.000 rpmDrive command 0.000 %Feed factor 0.000Totalizer0.000 kgFeeder status lineProcess characteristicsSignal LampsStartStopAlarmProgram levelCommunicationUp to three KSU-II operator interfacescan be linked into a network of up to 31KCMs. Each KSU-II can be programmedto access a different KCM.Symbol KeysGRAV/VOL operation shiftJump to Home PageEscape from points in menu or levelsExits current page and brings up main programming menuPaging through screens or data entry optionsEnter feeder setpointView/reset feeder totalizerView/acknowledge current alarmsStart feederStop feederEnterRev. 2 / 2007-05Doc # 0590020302www.ktron.comS-070208-enPage 1 of 2

K-TRON Product SpecificationK-Tron Single Unit Display IIKSU-IIProgrammingInitial setup information (equipment andprocess data) are entered just once whenthe controller is first programmed.All entries are made with the easy-to-usekeypad. Data can be viewed on the displayat all times.Technical dataPower supply:9 - 40 V DC or12 - 24 V ACLanguages:Select from English, French, Spanish,Italian or German. Menu layout andlanguage are stored in the KCM.Temperature range:operating: -20° to 50° C (-4° to 122° F)storage: -25° to 70° C (-13° to 158° C)Housing:NEMA4/IP 65Hazardous Location Options:NEC Class II, Div. 2, Groups F & GATEX 3DHost-ComputerProfibus DP,DeviceNet,Modbusand many more...PrinterRS485KSU-IISingle unitcontrollerDimensions [mm (in)]Cut Out Face Plate Side View122 (4.8)144.5 (5.7)122 (4.8)144.5 (5.7)85 (3.3)> 30 (1.2)Caution: these measurements are for general reference only. Please consult dimensional drawing for exact measurementsK-TRON AMERICA / Pitman, NJ 08071 USA / Tel: (856) 589-0500 / e-mail: ka@ktron.comK-TRON (Switzerland) Ltd / CH-5702 Niederlenz / Tel: +41 62 885 71 71 / e-mail: ks@ktron.comAll addresses on sheet: / Alle Adressen auf Blatt: / Toutes les adresses sur fiche: I-000001Copyright by K-TRON. Covered by patents in USA and foreign countries. Specifications subject to change without notice.Rev. 2S-070208-enPage 2 of 2