Robot-Stainer HMS 740 Flexibility Efficiency Quality - Cellab

Technical data/accessoriesTechnical data HMS 740– Modern, ergonomic housing design withtransparent cover– A total of 42 stations with 34 reagent stations,volume 480 ml– 2 integrated DI stations with pressurecontrolledconnection and on-demandsupply (option)– 4 integrated heating stations with ventilation(option), can be controlled in 1°C-steps from+35°C up to +70°C– 4 rinsing stations with controlled water supplyand filling upon demand– Continuous and comfortable loading andunloading via 1 entry and 3exit stations integrated in one drawer– High specimen capacity with up to 2000slides per day for standard HE stainings– Bath containers for special stainings withreduced volume for 8 slides max. (accessory)– All bath containers with covers made ofchemical resistant plastic– Unique management of covers; the covers areautomatically rotated during program run tominimize oxidation and evaporation ofthe reagents– Efficient vapor escape system with downwardsventilation flow and active charcoal filter toeliminate toxic vapors– Reduced reagent carry-over by patenteddripping mechanism– Silent and fast running moving mechanics– Adjustable agitation independent fromtransportation arm; 3 different agitationspeeds can be selected– Simultaneous run of several programs– Touch screen monitor with large graphic colordisplay– Easy operation by simple menu controlwith minimal sequence of instructions– Simultaneous indication of all runningprograms, the schematic bath plan andall relevant staining data– Touch pad keyboard with 5 quick start buttonsfor easy execution of staining programs– Incubation times from 1 sec. ... 99 min.59 sec. in steps of seconds can beprogrammed freely– Permanent memory for 50 programs withup to 100 program steps– Integrated quality management ofthe reagents– Password protected user levels– Automatic documentation of all stainingprocesses and staining relevant datafor quality control– It is possible to store protocols, bath plans,quality and staining documentsfor archiving or for quality control– Printer connection– Emergency power supply via integratedindependent power supply (UPS)Dimensions: 1.160 x 715 x 685 mm(wide/deep/high)Footprint: 1085 x 595 mmWeight: 160 kgCTM 6 Glass CoverslipperThe MICROM CTM 6 is an automatic glasscoverslipper for histological and cytologicalslides. This very efficient glass coverslipper isdesigned to carry out the coverslipping processwith best quality at a strongly reduced time.Due to its small footprint and integrated fumecontrol, the instrument fits into every lab.ConsumablesBest and constant staining results depend onthe performance of the instrument as well ason the high quality of the staining reagents.Using the consumables from Richard-AllanScientific, an excellent performance with bestand constant results is guaranteed.MICROM International GmbHRobert-Bosch-Strasse 49D-69190 WalldorfFon: +49-6227-836 0Fax: +49-6227-836 111e-mail: info@microm.deInternet: www.microm.deRev. 04 06