Electronics, Instruments & Navigation 795 - Paynes Marine Group

666842rope out of the jaws and into the cockpit, while the provenstripper ring goes round the WaveSpring. Lewmar’s uniquedesign ensures you cannot snag that loose rope cover.Cordage, Rigging & Sailboat HardwareevO Winch dimensionsWave Spring jaw and stripper ringNote: Not all mounting holes are symmetrical on all models.The integrated investment cast stainless steel feeder armcovers the winch, and does not create a rope trap above ourWaveSpring jaws.The feeder arm position can be adjusted to smoothly feed therope out of the jaws and into the cockpit, while the provenWavestripperSpring goesjawroundandthestripperWaveSpring.ringLewmar’s uniquedesign ensures you cannot snag that loose rope cover.The integrated investment cast stainless steel feeder armcovers the winch, and does not create a rope trap above ourWaveSpring jaws.evO Winch dimensionsThe feeder arm position can be adjusted to smoothly feed theNote: Not all mounting holes are symmetrical on all models.rope out of the jaws and into the cockpit, while the provenstripper ring goes round the WaveSpring. Lewmar’s uniquedesign ensures you cannot snag that loose rope cover.evO evO evOWinch Self-Tailing Self-TailingdimensionsWinch Winch Specifications•• "FAST FIT" stud fixings5 x M6 ( 1 ∕2 in) c’sk head screws on 113mm (4• 15 ∕32 in) PCDUser friendly direction arrows5 x M6 ( 1 ∕2 in) c’sk head screws on 121mm (4 3 ∕4 in) PCD• All the benefits of the EVO range5 x M8 ( 5 ∕16 in) c’sk head screws on 136mm (5 11 ∕32 in) PCD5 x M8 (• 5 Choice of three finishes.∕16 in) c’sk head screws on 150mm (5 29 ∕32 in) PCD6 x M8 ( 5 • ∕16 Convertable in) c’sk head screws to electric on 165mm (6 1 ∕2 in) PCDdBHldBHlNote: Not allPartmounting holes are symmetrical on all models.Gear Ratio Power Ratio SWL Weight Drum Dia Base Dia Height Line Entry Line SizePart Gear Ratio Power Ratio SWL Weight Drum Dia Base Dia Height Line Entry Line SizeNumber Model Finish 1st 2nd 1st 2nd kg lb kg lb mm in mm in mm in mm in mm inNumber Model Finish 1st 2nd 1st 2nd kg lb kg lb mm in mm in mm in mm in mm in49515055 15ST Alloy Black 2:1 15.8:1 570 1257 2.9 6.4 65.7 2 9 ∕16 121 4 3 ∕4 115 4 11 ∕16 58 2 5 ∕16 8-12 5∕16- 1 ∕249550055 50ST Alloy Black 2.6:1 9:1 13.9:1 48.6:1 1250 2756 8.8 19.4 93 3 5 ∕8 181 7 1 ∕8 196.8 7 3 ∕4 86 3 3 ∕8 8-14 5∕16- 9 ∕1649515057 15ST Alloy Grey 2:1 15.8:1 570 1257 2.9 6.4 65.7 2 9 ∕16 121 4 3 ∕4 115 4 11 ∕16 58 2 5 ∕16 8-12 5∕16- 1 ∕249550057 50ST Alloy Grey 2.6:1 9:1 13.9:1 48.6:1 1250 2756 8.8 19.4 93 3 5 ∕8 181 7 1 ∕8 196.8 7 3 ∕4 86 3 3 ∕8 8-14 5∕16- 9 ∕1649515056 49550056 15ST 50ST Chrome Bronze 2.6:1 2:1 9:1 15.8:1 13.9:1 48.6:1 1250 570 2756 1257 12.1 3.9 26.7 8.6 93 65.7 32 5 ∕8 9 ∕16 181 121 7 1 4∕8 3 ∕4 196.8 115 7 3 4∕4 11 ∕16 8658 3 3 ∕82 5 ∕16 8-14 8-125∕16- 5∕16- 9 ∕161 ∕249530055 49555055 30ST 55ST Alloy Black 2.8:1 2:1 11.2:1 4.2:1 13.8:1 29.2:1 54:1 1480 685 3263 1510 12.0 4.2 26.4 9.2 105 74 42 115 ∕8 ∕16 205 138 8 1 5∕16 7 ∕16 237.5 145.859 11 ∕32 5 3 ∕4 11569 4 1 2∕2 11 ∕16 8-16 8-125∕16- 5∕16- 5 ∕81 ∕249530057 49555057 30ST 55ST Alloy Grey 2.8:1 2:1 11.2:1 4.2:1 13.8:1 29.2:1 54:1 1480 685 3263 1510 12.0 4.2 26.4 9.2 105 74 42 115 ∕8 ∕16 205 138 8 1 5∕16 7 ∕16 237.5 145.859 11 ∕32 5 3 ∕4 11569 4 1 2∕2 11 ∕16 8-16 8-125∕16- 5∕16- 5 ∕81 ∕249530056 49555056 30ST 55ST Chrome Bronze 2.8:1 2:1 11.2:1 4.2:1 13.8:1 29.2:1 54:1 1480 685 3263 1510 17.0 5.6 37.5 12.3 105 74 42 115 ∕8 ∕16 205 138 8 1 5∕16 7 ∕16 237.5 145.859 11 ∕32 5 3 ∕4 11569 4 1 2∕2 11 ∕16 8-16 8-125∕16-5∕16- 5 ∕81 ∕215 30 40 45 50 55 65 70 8049540055 49565055 40ST 65ST Alloy Black 1.9:1 3.1:1 14.8:1 5.8:1 13.4:1 13.2:1 40.2:1 64:1 1700 795 3748 1753 16.6 4.9 36.5 10.7 118 74 42 515 ∕8 ∕16 231 148 95 113 ∕8 ∕16 253.5 158.5 106 1 ∕4 121.579 4 13 ∕16 3 1 ∕8 8-18-12 5 ∕16- 11 5∕16- 1 ∕249540057 49565057 40ST 65ST Alloy Grey 1.9:1 3.1:1 14.8:1 5.8:1 13.4:1 13.2:1 40.2:1 64:1 1700 795 3748 1753 16.6 4.9 36.5 10.7 118 74 42 515 ∕8 ∕16 231 148 95 113 ∕8 ∕16 253.5 158.5 106 1 ∕4 121.579 4 13 ∕16 3 1 ∕8 8-18-12 5 ∕16- 11 5∕16- 1 ∕249540056 49565056 40ST 65ST Chrome Bronze 1.9:1 3.1:1 14.8:1 5.8:1 13.4:1 13.2:1 40.2:1 64:1 1700 795 3748 1753 23.8 6.5 52.4 14.3 118 74 42 515 ∕8 ∕16 231 148 95 113 ∕8 ∕16 253.5 158.5 106 1 ∕4 121.579 4 13 ∕16 3 1 ∕8 8-18-12 5 ∕16- 11 5∕16- 1 ∕2evO Self-Tailing Winch Specifications49545055 For information on the 45ST Lewmar Ocean Range Alloy please Black go to www.lewmar.com2.4:1 7.6:1 13.9:1 44.8:1 1200 2646 7.2 15.8 87 3 7 ∕16 168 6 5 ∕8 177.7 7 84 3 5 ∕16 8-14 5∕16 - 9 ∕16dBHl49545057 45ST Alloy Grey 2.4:1 7.6:1 13.9:1 44.8:1 1200 2646 7.2 15.8 87 3 7 ∕16 168 6 5 ∕8 177.7 7 84 3 5 ∕16 8-14 5∕16 - 9 ∕16Part Gear Ratio Power Ratio SWL Weight Drum Dia Base Dia Height Line Entry Line Size49545056 Number Model 45ST Chrome Finish Bronze 2.4:1 1st 7.6:1 2nd 13.9:1 1st 44.8:1 2nd 1200 kg 2646 lb 9.7 kg 21.3 lb mm 87 3 7 in ∕16 mm 168 6in 5 ∕8 177.7 mm in 7 mm 84 3 5 in ∕16 8-14 mm 5∕16 in- 9 ∕16For 49550055 information on the Lewmar 50ST Ocean Range Alloy please Black go to www.lewmar.com2.6:1 9:1 13.9:1 48.6:1 1250 2756 8.8 19.4 93 3 5 ∕8 181 7 1 ∕8 196.8 7 3 ∕4 86 3 3 ∕8 8-14 5∕16- 9 ∕1649550057 50ST Alloy Grey 2.6:1 9:1 13.9:1 48.6:1 1250 2756 8.8 19.4 93 3 5 ∕8 181 7 1 ∕8 196.8 7 3 ∕4 86 3 3 ∕8 8-14 5∕16- 9 ∕1649550056 50ST Chrome Bronze 2.6:1 9:1 13.9:1 48.6:1 1250 2756 12.1 26.7 93 3 5 ∕8 181 7 1 ∕8 196.8 7 3 ∕4 86 3 3 ∕8 8-14 5∕16- 9 ∕1649555055 55ST Alloy Black 2.8:1 11.2:1 13.8:1 54:1 1480 3263 12.0 26.4 105 4 1 ∕8 205 8 1 ∕16 237.5 9 11 ∕32 115 4 1 ∕2 8-16 5∕16- 5 ∕849555057 55ST Alloy Grey 2.8:1 11.2:1 13.8:1 54:1 1480 3263 12.0 26.4 105 4 1 ∕8 205 8 1 ∕16 237.5 9 11 ∕32 115 4 1 ∕2 8-16 5∕16- 5 ∕8Part Gear Ratio Power Ratio SWL Weight Drum Dia Base Dia Height Line Entry Line Size49555056 55ST Chrome Bronze 2.8:1 11.2:1 13.8:1 54:1 1480 3263 17.0 37.5 105 4 1 ∕8 205 8 1 ∕16 237.5 9 11 ∕32 115 4 1 ∕2 8-16 5∕16- 5 ∕8Number Model Finish 1st 2nd 1st 2nd kg lb kg lb mm in mm in mm in mm in mm in49565055 65ST Alloy Black 3.1:1 14.8:1 13.4:1 64:1 1700 3748 16.6 36.5 118 4 5 ∕8 231 9 1 ∕8 253.5 10 121.5 4 13 8-18 5 ∕16- 11 ∕1649550055 50ST Alloy Black 2.6:1 9:1 13.9:1 48.6:1 1250 2756 8.8 19.4 93 3 5 ∕8 181 7 1 ∕8 196.8 7 3 ∕4 86 3 3 ∕8 8-14 5∕16- 9 ∕1649550057 49565057 50ST 65ST Alloy Grey Alloy Grey 2.6:1 9:1 3.1:113.9:1 14.8:148.6:1 13.4:11250 64:12756 17008.8374819.4 16.6 9336.53 5 ∕81181814 5 ∕8 7 1 ∕8231196.89 1 ∕8 7 3 ∕4253.586 10 3 3 ∕8121.5 8-144 13 5∕16- 9 8-18∕165 ∕16- 11 ∕1649550056 49565056 50ST 65ST Chrome Bronze Chrome Bronze 2.6:1 9:1 3.1:113.9:1 14.8:148.6:1 13.4:11250 64:12756 170012.1 374826.7 23.8 9352.43 5 ∕81181814 5 ∕8 7 1 ∕8231196.89 1 ∕8 7 3 ∕4253.586 10 3 3 ∕8121.5 8-144 13 5∕16- 9 8-18∕165 ∕16- 11 ∕1615st30st40st45st50st5 x M6 ( 1 ∕2 in) c’sk head screws on 94mm (3 7 ∕10 in) PCD© 2010 Dufour Yachts55stMounting instructions65st5 x M10 ( 3 ∕8 in) c’sk head screws on 184mm (7 1 ∕4 in) PCD15st5 x M6 ( 1 ∕2 in) c’sk head screws on 94mm (3 7 ∕10 in) PCDNote: not all holes are symmetrical on all models. For “FAST FIT” stud specifications30st visit www.lewmar.com5 x M6 ( 1 ∕2 in) c’sk head screws on 113mm (4 15 ∕32 in) PCD15 30 40 45 50 55 65 70 8015 30 40 45 50 55 65 70 80evO Self-Tailing Winch Specifications49555055 For information 55ST on the Lewmar Ocean Alloy Range Black please go 2.8:1 to www.lewmar.com11.2:1 13.8:1 54:1 1480 3263 12.0 26.4 105 4 1 ∕8 205 8 1 ∕16 237.5 9 11 ∕32 115 4 1 ∕2 8-16 5∕16- 5 ∕849555057 55ST Alloy Grey 2.8:1 11.2:1 13.8:1 54:1 1480 3263 12.0 26.4 105 4 1 ∕8 205 8 1 ∕16 237.5 9 11 ∕32 115 4 1 ∕2 8-16 5∕16- 5 ∕849555056 55ST Chrome Bronze 2.8:1 11.2:1 13.8:1 54:1 1480 3263 17.0 37.5 105 4 1 ∕8 205 8 1 ∕16 237.5 9 11 ∕32 115 4 1 ∕2 8-16 5∕16- 5 ∕8SCRIMTACEMERGENCYSAIL REPAIR TAPE49565055 65ST Alloy Black 3.1:1 14.8:1 13.4:1 64:1 1700 3748 16.6 36.5 118 4 5 ∕8 231 9 1 ∕8 253.5 10 121.5 4 13 ∕16 8-18 5 ∕16- 11 ∕1649565057 65ST Alloy Grey 3.1:1 14.8:1 13.4:1 64:1 1700 3748 16.6 36.5 118 4 5 ∕8 231 9 1 ∕8 253.5 10 121.5 4 13 ∕16 8-18 5 ∕16- 11 ∕1640st45st50st55st65std5 x M6 ( 1 ∕2 in) c’sk head screws on 121mm (4 3 ∕4 in) PCD5 x M8 ( 5 ∕16 in) c’sk head screws on 136mm (5 11 ∕32 in) PCD5 x M8 ( 5 ∕16 in) c’sk head screws on 150mm (5 29 ∕32 in) PCD6 x M8 ( 5 ∕16 in) c’sk head screws on 165mm (6 1 ∕2 in) PCD5 x M10 ( 3 ∕8 in) c’sk head screws on 184mm (7 1 ∕4 in) PCDNote: not all holes are symmetrical on all models. For “FAST FIT” stud specificationsvisit www.lewmar.comBULL NOSE SNAP49565056 65ST Chrome Bronze 3.1:1 14.8:1 13.4:1 64:1 1700 3748 23.8 52.4 118 4 5 ∕8 231 9 1 ∕8 253.5 10 121.5 4 13 ∕16 8-18 5 ∕16- 11 ∕16Die Cast Zinc Chrome Plated.For quick strong emergency repairs.For information on the Lewmar Ocean Range please go to www.lewmar.comA B CRE1183 3” x 15’148333 4-1/8" 9/16" 11/16"RE1185 6” x 15’BHl