Zinc, Paint & Accessories - Paynes Marine Group

Zinc, Paint & Accessories 721 

Canada Metal 

COMMERCIAL HULL ANODES 

Semi-streamlined anodes are used to protect the hull and other areas of small, medium, and large vessels. 

Steel tabs (straps) are standard. Available in four configurations. With Zinc or Aluminum anodes and Steel or Aluminum straps. 

Can be welded in place or the tabs can be drilled and bolted on. 

Zinc anode Zinc anode weight Alum. anode Alum. anode weight Length Width Depth 

steel strap alum. strap lbs steel strap alum. strap lbs in mm in mm in mm 

Z3 Z3A 10.30 AZ3 AZ3A 5.00 12 304 3.00 76 1.25 31 

Z4 Z4A 5.00 AZ4 AZ4A 2.10 6 152 3.50 88 1.00 25 

Z6 Z6A 3.00 AZ6 AZ6A 1.30 5 127 2.50 63 100 25 

Z19 n/a 22.00 AZ19 n/a 10.00 25 635 3.125 79 1.25 31 

Z22 Z22A 23.50 AZ22 n/a 11.00 14 355 6.50 165 1.50 38 

Canada Metal 

ZINC ANODES 

Nominal Dimensions 

NOM. WEIgHt A-Length B-Width C-Depth 

Part# Ibs (kg) MOUNtINg in (mm) in (mm) in (mm) 

BAR ANODES 

P5B2 25 (11 4) Bolt-on 24.0 (609) 3.0 (76) 1.25 (31) 

P7B2 45 (20.5) Bolt-on 24.0 (609) 4.0 (101) 2.0 (50) 

PLATE ANODES 

ZHC2 2.5 (1.1) Bolt-on 5.75 (146) 2.75 (70) 0.75 (19) 

ZHC47 45 (20.5) Bolt-on 12.0 (304) 6.0 (152) 2.5 (64) 

ZHS47 45 (20.5) Weld-on 12.0 (304) 6.0 (152) 2.5 (64) 

Canada Metal 

COMMERCIAL tEARDROP ANODES 


Nom. Weight A-Length B-Width C-Depth 

Ibs (kg) MOUNtINg in (mm) in (mm) in (mm) 

Z12 0.64 (.029) Bolt-on 4.0 (101) 1.25 (31) 0.75 (19) 

Z13 1.5 (.70) Bolt-on 6.0 (152) 1.75 (44) 1.0 (25) 

ZtS 5 (2.25) Weld-on 9.0 (228) 3.0 (76) 1.375 (34) 

AZtS* 

*Aluminum 

2.1 (0.95) Weld-on 9.0 (228) 3.0 (76) 1.375 (34) 

Canada Metal 

HEAt ExCHANgER ANODES 


Nom. Weight A-Length B-Width C-Depth 

Shape Ibs (kg) MOUNtINg in (mm) in (mm) in (mm) 

H1B6 square 9.0 (4.10) Bolt-on 6.0 (152) 6.0 (152) 1.0 (25) 

H2B2 circular 0.8 (.35) Bolt-on 2.0D (50) 1.0 (25) 

H2B3 circular 2.1 (.95) Bolt-on 3.0D (76) 1.0 (25) 

H2B4 circular 3.2 (1.45) Bolt-on 4.0D (101) 1.0 (25) 





Z22

722 

Zinc, Paint & Accessories 

Canada Metal 

MAx PROP 

MP63Z 3/4 - 1/1/8"(63mm) shaft diameter 

MP70Z 1-1/4" - 1-3/8"(70mm) shaft diameter 

MP83Z 1-1/2" - 1-3/4"(83mm) shaft diameter 

Canada Metal 

ZINC PLAtES 

No wire 

ZP1233 1/2" X 3" X 3" 

ZP1236 1/2" X 3" X 6" 

ZP1266 1/2" X 6" X 6" 

ZP12612 1/2" X 6" X 12" 

ZP3433 3/4" X 3" X 3" 

ZP3436 3/4" X 3" X 6" 

ZP3466 3/4" X 6" X 6" 

ZP34612 3/4" X 6" X 12" 

ZP133 1" X 3" X 3" 

ZP136 1" X 3" X 6" 

ZP166 1" X 6" X 6" 

ZP1612 1" X 6" X 12" 

Canada Metal 

ZINC ANODES 


NOM. WEIgHt A-Dia (ID) B-Dia (OD) C-Depth 

Ibs (kg) in (mm) in (mm) in (mm) 

PNA 2.0 (.90) 2.0 (50) 2.75 (69) 2.875 (73) 

PNB 2.5 (1.15) 2.25 (57) 3.0 (76) 3.0 (76) 

PN1 4.0 (1.80) 2.5 (63) 3.375 (85) 3.625 (92) 

PN2 4.9 (2.23) 2.875 (73) 3.75 (95) 4.0 (101) 

PN3 6.0 (2.70) 3.25 (82) 4.125 (104) 4.0 (101) 

PN4 7.5 (3.40) 3.75 (95) 4.625 (117) 4.5 (114) 

PN5 11.0 (5.00) 4.25 (107) 5.25 (133) 5.0 (127) 

PN6 11.5 (5.20) 4.625 (117) 5.625 (142) 5.5 (139) 

PN7 1 3.0 (5.90) 5.0 (127) 6.0 (152) 6.0 (152) 

PN8 17.4 (7.90) 5.5 (139) 6.625 (168) 6.375 (161) 

Bennett 

tRIM tAB ANODE 

Sleeved bolt holes 

BNt1AZ 3-374"L x 1"W x 1/2"D. .045 lbs 

Canada Metal 

PROPELLER NUt ANODES 

thread size Shaft O/S Replacement 

per inch Size Dia Zinc 

CMPNAC 1/2 NC 13 3/4 1 -1/4 CMPNA 

CMPNBC 5/8 NC 11 7/8 1 -5/8 CMPNB 

CMPNCC 3/4 NC 10 1 2 CMPNC 

CMPNDC 7/8 NC 9 1-1/4 2-5/16 CMPND 

CMPNEC 1 NC8 1-3/8 2-1/2 CMPNE 

CMPNFC 1-1/8 NC 7 1-1/2 2-3/4 CMPNF 

CMPNgC 1-1/4 NC 7 1-3/4 3-1/8 CMPNg 

CMPNHC 1-1/2 NC 6 2 3-3/8 CMPNH 

Canada Metal 

PROPELLER NUt ANODES FOR BENEtEAU 

Replacement 

thread size Zinc 

BEN22/25MM 16X150mm BEN22/25MMZ 

BEN30MM 20X150mm BEN30MMZ 

24X200mm BEN35MMZ 

n/a BEN40MMZ 

n/a BEN45MMZ 

Z1KC/Z2KC/Z3KC 

x453 

x473 x583 

Canada Metal 

WALtER KEEL COOLER ANODES 

Anode Width Length 

Z1KC 2-5/8 2-3/4 

Z2KC 2-3/4 3-1/4 

Z3KC 3-7/8 3-1/2 

x453 7/8 3-1/4 

x473 1 6-1/8 

x583 1 6-3/4

Canada Metal 

HULL ANODES 

4-3/4"L x 2"W x 3/4"H 

M24 

3-1/2"L x 1 -3/4"W x 1-3/8"H 

t20 

5-1/4"L x 2"W x 1"H 

t21 

Canada Metal 

COLLAR SHAFt 

A B C 

C1 3/4 2-1/8 1 

C2 7/8 2-1/8 1 

C3 1 2-1/2 1-1/4 

C4 1-1/8 2-1/2 1-1/4 

C5 1-1/4 2-1/2 1-1/4 

C6 1-3/8 3 1-1/4 

C7 1-1/2 3 1-1/4 

C8 1-3/4 3-1/2 1-3/8 

C9 2 3-1/2 1-3/8 

C9A 2-1/4 3-1/2 1-3/8 

C12 2-1/2 5 1-1/2 

C12A 2-3/4 5 1-1/2 

C13 3 5 1-1/2 

C14 3-1/2 6-1/2 1-1/2 

C15 4 6-1/2 1-1/2 

Canada Metal 

YANMAR SAIL 

DRIVE 

19642002652 

Canada Metal 

YANMAR 

PENCIL ZINC 

272100 

272100200200 Short 

9-1/4"L x 3-3/8"W x 3/4"H 

M25 

Diver's Dream 

12"L x 6"W x 1/2"H 

xZD 

AxZD Aluminum 

Canada Metal 

StREAMLINED SHAFt 

A B C 

x1 3/4 2-1/8 2-1/8 

x2 7/8 2-1/8 2-1/8 

x3 1 2-1/8 2-1/8 

x4 1-1/8 2-1/8 2-1/8 

x5 1-1/4 2-3/4 2-1/2 

x5A 1-1/4 2-5/8 2-1/2 

x6 1-3/8 2-1/2 2-1/2 

x7 1-1/2 2-1/2 2-1/2 

x8 1-3/4 3-1/4 2-7/8 

x9 2 3-1/4 2-7/8 

x10 2-1/4 4-1/4 3-3/4 

x11 2-1/2 4-1/4 3-3/4 

x12 2-3/4 4-3/4 3-5/8 

x13 3 4-3/4 3-5/8 

x25MM 25 mm 

x30MM 30 mm 

x35MM 35 mm 

x40MM 40 mm 

x50MM 50 mm 

Canada Metal 

NISSAN/tOHAtSU 

Stern bracket 

3C7602181 

6-1/4"L x 2-3/4"W x 5/8"H 

M30 

Mini Diver's Dream 

6"L X 4"W X 1/2"H 

MxZD 

MxZDA Aluminum 


7-1/2"L x 2-3/4"W x 1/2"H 

M40 

gROUPER 

Canada Metal 

RUDDER 

A thickness 

of one half 

R1 1-7/8 1/4 

R2 2-13/16 1/2 

R3 3-3/4 1/2 

R4 5 5/8 

R5 5-1/8 7/8 

R7 6-1/2 7/8 

Canada Metal 

ENgINE PLUgS 

Anode Lgth Dia NPt UNC 

Zinc 

replacement 

E00 2 1/4 1/8 1/4 E00Z 

E0 1-3/4 3/8 1/4 5/16 E0Z 

E1 2 1/2 3/8 3/8 E1Z 

E1D 1-3/4 1/2 3/8 3/8 E1DZ 

E1E 1-1/2 1/2 3/8 3/8 E1EZ 

E1F 1-1/4 1/2 3/8 3/8 E1FZ 

E1H 2 3/8 3/8 3/8 E1HZ 

E2 2 5/8 1/2 7/16 E2Z 

E3 2 3/4 3/4 1/2 E3Z 

E4 3-3/8 3/4 3/4 1/2 E4Z 

E5 3-5/8 3/4 3/4 1/2 E5Z

724 


Canada Metal 

MERCURY 

Trim tab 

31640 

31640A (Aluminum) 

Trim tab 

76214 

MFM, Anodic plate 

89949 

Anodic plate 

821630 


Bravo III Prop nut anode (pre 04) 

865182 

865182CA (Aluminum) 

Trim tab 

34127 

New Generation 

76214-5 

76214-5A (Aluminum) 

MFM, Side mount 

826134 


Anodic plate 

821629 


Canada Metal 

ALUMINUM ANODE KItS 

Kits include: 

• Fastening hardware 

• Installation instructions 

• All anodes required for 100% protection 

Aluminum 

ALPHAKItA Alpha 1 Gen II Kit 

BRAVO1KItA Bravo 1 Kit 

BRAVO23KItA Bravo 2/3 Kit pre 2004 

BRAVO3KItA Bravo 3 2004 & newer 

VERADO4KItA Verado 4 Kit 

VERADO6KItA Verado 6 Kit 

Gimbal plate 

34762 

Gimbal plate 

43994 



818298 


MFM, Trim tab 

822157 

Trim tab 

46399 


43396 

Trim cylinder 

806190 

Bearing carrier Bravo II 

806188 


Canada Metal 

MERCURY BRAVO 3 

Prop Nut Anode 

CMPNDAF14 

CMPND Zinc anode only 

CMPNDA Aluminum anode only 

Gimbal bolt head 

55989 


Trim cylinder 

806189 


Bearing carrier 

806105 


Trim tab 15-25 hp 

98432-5 

Canada Metal 

ZINC ANODE KItS 

Kits include: 




Zinc 

ALPHAKItZ Alpha Gen II Kit 

BRAVO1KItZ Bravo 1 Kit 

BRAVO23KItZ Bravo 2/3 Kit, pre 2004 

BRAVO3KItZ Bravo 3, 2004 & newer Kit

Canada Metal 

OMC 

Side mount, threaded 

123009 

Prop shaft 

431708 

Rear gearcase 

397768 

Side mount, no thread 

327606 

Transom 

392462 

Transom 

367 

Canada Metal 

OMC StERN DRIVE ANODES 

Transom 

984547 

Transom 

980756 

Canada Metal 

SUZUKI 

Transom 

55320-95310 

Front gearcase 

983494 

Trim tab 

55125-9630 

Transom 

983952 

Midsection cube 

393023 

Transom 

392123 


398873 


984513 

Transom bar 

3C7602181 


Prop shaft 

431708 

Midsection 

398331 

Midsection 

389999 

Transom 

433580 

Transom 

982277 

Trim tab 

55125-87D00

726 


Canada Metal 

VOLVO 

Prop ring 

V15 

Prop ring 

875812 

Transom 

852835 


Anodic plate 

984513 

Prop ring 

V16 

Prop ring 

875821 


Transom 

832598 


Anodic plate 

3854130 

Canada Metal 

ALUMINUM ANODE KItS 

Kits include: 




Canada Metal 

YAMAHA ANODES 

Trim tab 

664-45371-01 

Trim tab 

6K1-45371-00 

Transom 

6g5-45251-01 

Trim tab 

688-45371-02 

Skeg 

61A-45371-00 

Trim tab 

6E5-45371-01 

Anodic bar 

872139 

Prop ring 

V17 

Prop ring 

851983 

Pencil 

838929 


Anodic plate 

3855411 


280DPKItA Volvo 280 dual prop (aluminum) 

280KItA Volvo 280 (aluminum) 

290DPKItA Volvo 290 dual prop(aluminum) 

290KItA Volvo 290 (aluminum) 

SxKItA Volvo SX (aluminum) 

Transom 

6H1-45251-02 

Trim tab 

61N-45251-01 

Side Mounted 

6E0-45251-11 

Anodic block 

6E5-45251-00 

Prop ring 

V18 

V18A (Aluminum) 

Pencil 

823661 


Side mount 

872793 

Folding prop 

852018 

Anodic block 

688-45251-01 

Canada Metal 

YAMAHA ALUMINUM 

ANODE KItS 

Kits include: 




Y150CRKItA 150HP C/Rotatating 

Y150KItA 150HP 

Y200250KItA 200-250HP 

YHP200300KItA high performance

Canada Metal 

HONDA ALUMINUM & ZINC ANODES 

Side mount 

6E0-45251-11 

(41106-935-812) 

MERCURY 

Canada Metal 

MERCURY MAgNESIUM 

ANODE KItS 

Kits include: 




ALPHAKItM Alpha Gen II 

BRAVO1KItM Bravo I 

BRAVO23KItM Pre 2004 

BRAVO3KItM Bravo III 2004 + 

OMC 

VOLVO 

RUDDER & SHAFt 

x2M 7/8" shaft 

x3M 1-1/2" shaft 

x5M 1-1/4" shaft 

Trim tab 

31640 (41107-ZW1-003ZA) 


MAgNESIUM ANODES 

For fresh water use 

806190M 


31640M 55989M 806189M 43994M 

76214M 

821629M 806105M 

984513M 

123009M 

832598M 875821M 852835M V18M 

R2M 

Side mount 

826134 

(41109-ZW1-003) 

Transom 

06411-ZV5-00 

HULL ANODES 

MxZDM Mini Diver's Dream 6"L x 4"W x 1/2" 

xZDM Diver's Dream 12"L x 6"W x 1/2" 

Trim tab 

664-45371-01 

(41107-ZV5-000) 

Transom 

06411-ZW1-00 

821630M 

t20M 

Teardrop

728 


ProMariner 

CORROSION WORKBOOK 

• Take the guesswork out of corrosion control. 

Written for the non-technical person, this 

book answers questions and corrects misunderstandings about 

galvanic corrosion 

• Our portable Corrosion Test Meter and this book are all you need to 

solve corrosion problems on any vessel 

• Within one hour, this easy to understand workbook will enable you to 

perform corrosion surveys 

20001 


SHAFt BRUSH 

Provides connection for prop shafts, rudder shafts, flywheels, etc. 

with ship's bonding system. Can eliminate radio frequency noise 

from rotating shafts and machinery. Long wearing metallic graphite 

bush on phosphor bronze strap. 12" L x 1" W. 

20035 


YACHt CORROSION MONItOR 

• Instantly identifies adequate protection or 

damaging corrosion voltages 

• Simple yellow and green scale monitors 

voltage 

• Best for salt water use 

20030 


CORROSION 

tESt MEtERS 

ANALOg tESt MEtER 

• Best for salt water use. This easy to read meter reads all corrosion 

problems instantly 

• Green=good, yellow=bad, scale needs no interpretation 

20006PRO 


DIgItAL tESt MEtER 

• Highly sensitive digital meter for all 

types of water 

• Can also be used for testing D.C. 

volts, A.C. volts, continuity, diodes, 

resistance and up to 10 amps 

amperage 

60016PRO 


PROSAFE FAILSAFE gALVANIC ISOLAtORS 

ProSafe FS installs easily and does not require a dedicated monitor to 

verify the operational status of the galvanic isolator as required by non 

FailSafe Certified galvanic isolators. 

ProSafe FS 30 & 60 are built on robust FlatPack semiconductor 

platforms ensuring that in the event of a failure, the failure is safe by not 

compromising the ground continuity on-board when connected to AC 

Shore Power. 

22034 Shore cord inlet 

compatibility Single 15, 16, 20 or 30 

size L x W x H 6.75” x 7” x 2.5” 

22074 Shore cord inlet Single 50 or Dual 15’s, 16’s, 

compatibility 20’s or 30’s 

size L x W x H 7.25” x 6.5” x 3.75” 


PROSAFE 

gALVANIC ISOLAtORS 

Interrupts galvanic circuit with other boats and the dock when your boat 

is plugged into a shore power system. Maintains AC safety ground and 

solves the most common cause of corrosion. Protects against zinc loss. 

ProSafe consists of the galvanic isolator, the monitoring electronics and 

a remote display. 

• On-board automated test, monitoring and annunciation of ProSafe 

Galvanic Isolator operation and protection 

• On-board automated test, monitoring and annunciation of shore 

station AC ground wire presence and operation 

• On-board automated indication of AC shore power polarity 

22088 50 amp single / 30 amp dual AC line system 

22033 30 amp galvanic isolator 

Marinco 

gALVANALERt 

SHORE POWER CORROSION DEtECtOR 

GALVANALERT easily attaches to your existing 30a shore power inlet 

and cordset to constantly monitor if there is unsafe corrosion activity or 

if a reverse polarity condition exists – so you can act before serious and 

costly damage occurs to your boat. 

g30

Richard 

WOOD SCRAPERS 

Plastic handle, painted yellow and green. Nut and bolt used to 

hold heat treated blade. Every blade is scientifically heat treated 

and tempered for longer cutting edge life. There is positively no 

vibration in Richard wood scrapers and every blade has 2 cutting 

edges. 

Scraper Blade 

Complete Only 

W14 13-1/2" x 2-1/2" W21/2B 

W21/2 8" x 2-1/2" W21/2B 

W13/4 7-5/8" x 1-3/4" W13/4B 

W10 5-3/4" x 1" W10B 

Richard 

ALL MEtAL SCRAPER 

RS300 Scraper w/blade 

1212 Bulk replacement blades 

RS2B Five pack replacement blades 

Richard 

CARBIDE PAINt SCRAPER 

2" double-edge carbide blade paint scraper. 

Scrapes paint or varnish on the toughest 

materials like concrete, steel, hard wood. 

12" handle. 

04614 Scraper 

04634 Replacement blade 

Richard 

PROFESSIONAL QUALItY 

Mirror finish. Blade ground to painter’s most exact requirements. 

Black handle made of superior plastic. Not affected by chemicals 

such as paint thinners, solvents and other petroleum by-products. 

When ordering replace _ in part # with 

F for flexible or S for stiff. 

Scrapers 

S6_ 6" 

S5_ 5" 

S4_ 4" 

S3_ 3" 

Putty Knives 

P2_ 2" 

P11/2_ 1-1/2" 

P11/4_ 1-1/4" 


Richard 

SERIES “H” PUttY KNIVES 

Heat treated and polished flexible household putty knives with half tang, 

spring steel blades. Two colour plastic handles are securely fastened 

with one compression rivet. The hole in the handle is useful for hanging 

in the workshop. Flexible. 

H5F 5" 

H4F 4" 

H3F 3" 

H1F 1" 

Richard 

REtRACtABLE UtILItY KNIFE 

This item has a lightweight, rugged, comfortable metal handle. 

Individually mounted on an attractive card punched for pegboard 

display. 

U3C Knife with 5 blades 

U1B Replacement blades 

Richard 

SNAP SHARP UtILItY KNIFE CARDED 

All plastic handle. Does not rust or conduct electricity. Positive lock. 

Cuts paper, wood, plastic, leather, etc. Break away blade. 

726 Knife with blade 

728 Five pack replacement blades 

3M 

PLAStIC SPREADERS 

Use with body fillers, fiberglass resin, putty, etc. Gives 

you a smooth finish which means less sanding. Three 

sizes: 2-2/34"x4", 3"x5-1/4", 3-1/2"x6-1/4". Reusable - 

just bend, and hardened material will pop off spreader. 

357tM 

Interlux 

PAINt BUCKEt 

83 oz (2.5 litre) bucket useful 

for decanting coatings to avoid 

contaminating the whole can by 

dipping your brush into it. 

A001 

Interlux 

PAINt StRAINER 

Disposable paper paint filter 

with mesh bottom for straining 

varnish or any coating to remove 

impurities. 

A002 

Simms 

tRAY ARM 

A great new painter's tool designed to make the job easier. 

Eases back and leg strain by eliminating the need to bend 

over to move or pick up a roller tray. Safely and visibly holds 

a paint roller on an extension pole in an upright position 

during painting breaks instead of disassembling or lying 

flat on the floor, thus avoiding paint spills and accidents. 

Convenient for carrying a paint tray with one hand. The tool 

affixes to the bottom of the Simms T-2005 tray for a secure 

lock. The adjustable clamp can be used to secure other 

types of metal and plastic trays. 

A-2007

730 


Osborne 

CAULKINg IRONS 

Length Width thickness 

273-00 5" 2" 1/32" 

273-0 5-5/8" 2-1/2" 1/16" 

273-1 5-7/8" 2- 1/4" 1/8" 

Cancord 

CAULKINg COttON 

1 lb rolls. 

COttON 

SPUN SWEDISH 

#1 MARINE OAKUM 

Sold by the brick. 

Approximately 10 lbs to a brick. 

OAKUM 

Davis 

SLICK SEAM 

Slick Seam is a remarkable caulking 

compound made of fine waxes, pure mineral 

products and silicate fibres. This combination 

makes Slick Seam not only effective, but easy 

to use for any underwater seam application. It requires neither 

mixing nor priming. Once in place, Slick Seam stays put no matter 

how much wood flexes or swells. It adheres to most solid surfaces 

whether wet, dry or even oil stained. Applies easily - cleans up fast. 

Cures ready for painting in half an hour. 16 oz jar. 

DAV0730 

3M 

FLOWABLE FINISHINg PUttY 

Two component, self-levelling putty designed for use as a "skin" 

coat over plastic filler to fill pinholes, sand scratches, low areas or 

other imperfections in metal and fiberglass. Cures tack-free in 30 

minutes. Flowable, brushable and sandable. Minimizes staining 

that can occur with basecoat/clearcoat systems over body filler. 

Vacuum processed to minimize pinholes. Excellent adhesion to 

galvanized, aluminum and thoroughly cured and sanded factoryapplied 

paint surfaces. 710 ml tube. 

05824 

3M 

BONDO FIBERgLASS 

REINFORCED FILLER 

Unique reinforced filler containing short, interlocking 

fiberglass strands and fibers that make it twice as 

strong as regular filler. Sandable in only 20 minutes 

and compatible with all paint systems. Waterproof. 

Includes Red Cream Hardener. 

272tM 

3M 

MARINE HIgH StRENgtH 

REPAIR FILLER 

A unique vinyl ester two component formulation 

designed with short strand fiberglass for structural 

filling above and below the waterline. Quart/862 g. 

46013tM 

3M 

MARINE PREMIUM FILLER 

A unique vinyl ester two component 

formulation designed for marine filling and 

fairing applications above and below the 

waterline. Unique easy to sand formula 

designed with 3M Scotchlite Glass Bubbles. 

46004tM Pint / 408 g 

46005tM Quart / 862 g 

46006tM Gallon / 3.54 Kg 

Interlux 

SURFACINg PUttY 

Interlux Surfacing Putty is a fast drying, single 

package surfacing compound which is ideally 

suited for filling fastener holes, shallow gouges 

and for fairing up minor surface imperfections 

on bare wood and fibreglass prior to the 

application of paint. White pint. 

257-.5L 

Crystal-Pak 

FEAtHER-RItE 

FAIRINg COMPOUND 

Feather-Rite is a fast curing lightweight, filled polyester 

putty that is easily sanded and faired. Feather-Rite 

comes complete with its own colored BPO paste 

catalyst for easy mixing. 

FL750 .75L 

FL3 3L 

Interlux 

INtERFILL EPOxY FILLER 

Interfill epoxy filler can be used above the waterline 

prior to applying topside finishes and can be used to 

fill pinholes between coats of two-part polyurethanes, 

due to its ability to trowel to a very fine, smooth 

finish. Interfill epoxy filler can also be used below the 

waterline to fill blisters and as part of a keel fairing system. Dries to a 

grey colour. 

If Interfill epoxy filler is used below the waterline, it must be 

overcoated with four coats of Interprotect 2000E/2001E. The cured 

epoxy has excellent solvent resistance and will not be attacked by the 

strong solvents in two-part polyurethanes or epoxies. 

Pack sizes: 2 US gallon (4 gallons mixed - Part A and Part B). 

YAA867-2 Base 

YAA868-2 Hardener, standard 

YAA869-2 Hardener, fast

Recochem 

tURPENtINE 

13301 1 Litre 

13304 4 Litre 

Recochem 

LACQUER 

tHINNER 

13551 1 Litre 

13554 4 Litre 

Recochem 

PAINt tHINNER 

13321 1 Litre 

13324 4 Litre 

Recochem 

ACEtONE 

13260 500 ml 

13261 1 Litre 

13264 4 Litre 

Recochem 

SOLVENt 

13221 1 Litre 

13224 4 Litre 

Pettit 

BRUSHINg tHINNER 

A general purpose thinner used in most paint 

products for ease of application when brushing. 

PEt12120Qt Quart 

PEt12120gA Gallon 

Interlux 

BRUSHINg LIQUID 333 

Brushing Liquid 333 is a slow drying thinner 

to improve flow of enamels, varnishes and 

brightside. Quart. 

333-1L 

Recochem 

LINSEED OIL 

13731 1 Litre, Raw 

13734 4 Litre, Raw 

13401 1 Litre, Boiled 

13404 4 Litre, Boiled 

Recochem 

ZINC II 

Zinc naphthenate. 

Clear paintable. 

13711 1 Litre 

13714 4 Litre 

Recochem 

COPPER II 

Copper naphthenate. 

Green paintable. 

13671 1 Litre 

13674 4 Litre 

Recochem 

KEROSENE 

14534 4 Litre 


Recochem 

ULtRA-CLEAR 

LAMP OIL 

14581 1 Litre 

Captain Phab 

MARINE StOVE FUEL 

Alcohol for pressure stoves 

CAP307 1L 

Recochem 

MEtHYL HYDRAtE 

13390 500 ml 

13391 1 Litre 

13394 4 Litre 

Recochem 

CAMP StOVE FUEL 

14431 1 Litre 

14434 4 Litre 

Interlux 

SPECIAL tHINNER 216 

A fast evaporating multi-purpose solvent for spraying 

and cleanup. Also recommended for removing 

sanding residue from boat bottoms, wiping bare metal 

clean and general cleanup of paint equipment. For 

use with most single part topside and antifouling 

paints. Quart. 

216-1L 

Pettit 

SPRAYINg tHINNER 

This is a fast evaporating thinner used in most Pettit 

products to reduce the paint for spray applications. 


PEt12121Qt Quart

732 


Interlux 

REDUCINg SOLVENt 2316N 

A fast evaporating thinner for spraying two part 

polyurethanes or epoxies. Quart. 

2316-1L 

Interlux 

REDUCINg SOLVENt 2333N 

Reducing Solvent 2333N is a slow evaporating thinner for 

brushing two-part polyurethanes or epoxies. For use with 

most two-part polyurethanes and epoxy paints. Quart. 

2333-1L 

Interlux 

FIBREgLASS SURFACE PREP 

A mold release agent and wax remover, which 

eliminates the need for sanding bare fibreglass when 

used with Fibreglass No Sand Primer. 

YMA601-1L 

Pettit 

BOttOM PREP FIBERgLASS 

DEWAxER 

A blend of strong chemical solvents that strips all 

mold release from fiberglass surfaces. Will also 

slightly etch fiberglass to give a good surface for paint 

application. Quart. 

PEt15095Qt 

Pettit 

BIO-BLUE 

A powerful blend of cleaning agents and 

silica grit that de-waxes, etches, cleans 

and prepares bare fiberglass for painting. 

Regardless of the boat's age, the initial 

surface preparation is critical. Quart. 

PEt92Qt 

Aquagard 

180 SOLVENt WASH 

Aquagard 180 Fiberglass Solvent Wash is 

formulated to strip the mold release agent 

from a fiberglass surface. The fiberglass is 

also etched slightly to a fine smooth surface for paint application. Since 

Aquagard 180 Fiberglass Solvent Wash contains strong solvents, it 

should not be used on polyester resin that is not fully cured: excess 

etching or softening may occur. 

AQg30000 Quart 

AQg30100 Gallon 

Interlux 

FIBREgLASS SOLVENt WASH 202 

Fibreglass Solvent Wash 202 removes mold release 

agents, wax, oil and grease form hulls of bare fibreglass 

boats. Quart. 

202-1L 

Interlux 

INtERStRIP PAINt REMOVER 

Interlux Fibreglass Pintoff 299 Paint Remover has a heavy jelly-like 

consistency for easy application. It is designed specifically for the 

removal of antifouling paint only from fibreglass boats. 

299E-1L Quart 

299E-4L Gallon 

Recochem 

PAINt & VARNISH REMOVER 

13331 1 Litre 

13334 4 Litre 

ePaint 

EP-StRIP 

Safe for use on antifouling paints, marine paints and varnish. 

EP-STRIP can be used on a variety of surfaces including wood, 

aluminum, gel coat and fiberglass. 

• Environmentally safe 

• Can be rolled, brushed or sprayed 

• Requires no neutralization 

• Thick composition clings to vertical surfaces 

EP-StRIP-g

Marine Tex 

tE-KA SCRUB-LESS 

CLEANER 

Easy to use. Deep cleans and brightens 

heavily soiled teak without hard scrubbing and sanding. No need 

for bronze wool. Restores the natural beauty of teak by removing 

embedded food stains, fish blood, dirt, grease and grey weathered 

appearance. Spend time enjoying your teak, not cleaning it. 

tEKAQt Quart kit 

Interlux 

PREMIUM tEAK REStORER 

Environmentally friendly water based formula that 

brightens teak in one step, revealing its natural colour and 

grain. 

YMA015 500ml 

Starbrite 

tEAK CLEANER 

Safe, one step formula does not require neutralizers. 

Contains no harsh acids which can etch wood grain and 

damage other surfaces if spilled. 

• Safe, easy to use formula 

• Removes stains and weathering 

• Use as the first step in the restoration of grey, 

weathered teak 

• No need to sand after cleaning 

• Will not raise wood grain 

S81416 16 fl oz 

S81432 32 fl oz 

Starbrite 

SEA SAFE tEAK CLEANER 

• Removes dirt and stains from teak and other woods 

• Use as the first step in the restoration of grey, 


• Biodegradable, environmentally friendly formula 

• Contains no strong acids or alkalies 

• Will not raise wood grain 

S89733 32 fl oz 

Starbrite 

tEAK BRIgHtENER 

Bring back warm, golden colour to oxidized and 

darkened teak. Enhances wood grain for a rich, natural 

look. 

• Brightens teak and other fine woods 

• Highlights wood grain and enhances warm natural 

colour 

• Use as the second step in the restoration of grey, 


• Easy to use - just apply and rinse 

• No rubbing or scrubbing required 

S81516 16 fl oz 

S81532 32 fl oz 


Starbrite 

SEA SAFE tEAK BRIgHtENER 

• Highlights grain on teak and other fine woods 

• Use as the second step in the restoration of grey, 


• Enhances warm natural teak colour 

• Environmentally friendly 

• Contains no strong acids or alkalies 

• Easy to use - brush on, rinse off 

S89734 32 fl oz 

Starbrite 

PREMIUM gOLDEN tEAK OIL 

Unique formula based on tung oil and space-age polymers provides 

incredible long lasting protection for teak surfaces. 

• Extra long lasting protection for teak 

• Gives teak a natural warm, golden colour 

• Easy to use 

• Contains ultraviolet absorbers to resist weathering 

• Fast drying 

• Advanced tung oil polymer formula 

• Lasts 4 to 6 times longer than standard teak oils 

S85116 16 fl oz 

S85132 32 fl oz 

S85100 Gallon 

Starbrite 

tEAK OIL 

Organic oil formula gives teak a beautiful, natural 

coloured finish. 

• Long lasting formula 

• Contains ultraviolet absorbers to resist weathering 

• Seals and protects teak and other fine woods 

• Fast drying - teak can quickly be put back into 

service 

• Oil penetrates deep into wood for extra protection 

S81616 16 fl oz 

S81632 32 fl oz 

Interlux 

PREMIUM tEAK OIL 

A traditional Scandinavian blend of oils for exterior and 

interior use. Easy to apply, dries fast to a warm, golden 

colour. 

YMA016 500ml 

Starbrite 

tEAK CARE KIt 

• Everything needed to clean, restore and 

protect teak in one convenient package 

• Each kit comes with a mail-in 

consumer rebate coupon 

• The perfect kit for the larger boat 

with extensive teak trim 

Each Kit contains: 1 Teak Oil, 1 

Teak Brightener, 1 Teak Cleaner 

S81202 Quart sizes 

S81216 Pint sizes

734 


Pettit 

FILLER StAINS 

A combination of wood filler and stain. Its purpose is 

to colour-stain the wood as well as to fill the pores of 

open grain wood. The filler stains can be intermixed 

or they can be shaded with oil or universal 

colourants to achieve just the right colour. 

PEt1081P Red mahogany, pint 

PEt1082P Brown mahogany, pint 

PEt1095P Mahogany, pint 

Interlux 

CEtOL 

The durable film of Cetol Marine 

protects wood from the elements and 

the demanding marine environment. 

It has excellent weathering properties 

and more importantly, it's flexibility 

allows for the natural expansion and 

contraction of wood which prevents 

Cetol Marine from cracking. Cetol Marine is 

also micro-porous allowing moisture to escape from the wood which 

will prevent blistering and flaking of the finish. It is an easy to apply 

low maintenance alternative to wood oils and other wood treatments 

with an attractive, translucent finish. It has been specially 

formulated with one goal in mind - to protect wood and keep it 

looking beautiful throughout the season with the least amount of 

maintenance possible. 

Cetol Marine Satin (Original) 

Cetol ® Marine contains synthetic transparent iron oxide pigments, 

which shield the wood against UV rays. It is these pigments that 

give Cetol ® Marine its attractive deep golden appearance. 

CEtSQ Satin Quart 

CEtSg Satin Gallon 

Cetol Marine Light 

Identical to the Cetol Marine but formulated with different pigments 

to produce a lighter amber appearance on wood 

CEtLQ Light Quart 

Cetol Marine Natural teak 

Rich golden color that will enhance the natural beauty and grain of 

wood. 

With “Next Wave” UV-absorbing technology, with which specialty 

resins and advanced UV absorbers provide greater protection, 

durability and longevity. 

CEtNQ Natural Quart 

CEtNg Natural Gallon 

Cetol Marine gloss 

Provides a high gloss, hard wearing, UV protection and an easy to 

clean finish. It can be used where a gloss appearance is preferred 

on top of Cetol Marine, Cetol Marine Light and Cetol Marine Natural 

Teak. Do not use on decks. 

CEtgQ Gloss Quart 

Interlux 

PERFECtION PLUS VARNISH 

• Exceptional gloss and gloss retention. 

• Fully compatible with oily woods like teak after 

adequate degreasing and substrate preperation 

• Chemical cure gives resistance to fuels, 

oil and mild acids and alkalis 

• Up to four times longer service life than ordinary varnishes 

• Best-in-class UV, chemical and abrasion resistance and superb gloss 

950KIt 

tUFSHIELD 

Since 1978, TufShield has continued to revolutionize the whole 

concept of wood care and has become the clear choice for those 

demanding only the finest clear wood finish for their marine, 

architectural and furniture projects. TufShield delivers varnishlike 

or oil-like appearance, but it employs the most advanced 

aliphatic isocyanate chemistry, capable of protecting beautiful 

woods permanently ... with only minimum upkeep and unheard 

of simplicity of application. It consists of two different, easy to use 

single component coatings - #1 Base Coat and #2 Top Coat. Unlike 

varnishes, oils and two-part systems which fail within a short time 

period due to their monolithic wood protection, TufShield uses 

multiple weather shields laid by these two independent one-part 

coatings, each separately programmed and fortified against the 

elements. Standard initial application of the complete TufShield 

System on bare wood requires 4 Base Coats and a minimum of 2 Top 

Coats to provide an appearance comparable to 12 coats of varnish. 

On a small project this result may be accomplished in 2 days. Only 

the 4th coat of #1 needs sanding before application of #2. 

tS2g Top Coat Gloss, 1L 

tS2S Top Coat Satin, 1L 

tS1 Base Coat, 500 ml 

tSR Reducer Base Coat, 1L 

Interlux 

SCHOONER gOLD VARNISH 

• Advanced UV technology 

• Longest lasting one-part varnish 

• Traditional amber colour 

• High build formulation achieves aesthetic results in fewer coats 

• Offers higher film build 

500-1L 1 Litre 

Interlux 

gOLDSPAR SAtIN VARNISH 

• Rich satin sheen for interiors 

• Hard one-part polyurethane 

• Resistant to scratches and alcohol 

• Ideal for cabin soles, cabinets, counters and tables 

60-1L 1 Litre 

Interlux 

COMPASS VARNISH 

• Fast-drying, tough durable finish one-part 

polyurethane gloss finish 

• Contains HALS and UV absorbers to increase 

lifespan of coating 

• Reduce your work time. Apply two coats per day - the fast-drying 

formulation minimizes dust contamination - and sand only after every 

second or third coat. Litre. 

501-1L

Pettit 

CAPtAIN'S VARNISH 

The standard of the industry for high quality work and 

the most durable of its kind. It delivers a high gloss, 

long lasting finish. The choice of many professionals 

for the past 20 years. 

PEt1015P Pint 

PEt1015Q Quart 

PEt1015g Gallon 

Pettit 

FLAgSHIP VARNISH 

Flagship Varnish offers the highest ultra-violet 

protection available, with the depth and richness 

of gloss increasing with each coat, to yield a clear 

amber, mirror finish. This polyurethane varnish offers 

the best protection available. 

PEt2015P Pint 

PEt2015Q Quart 


Pettit 

HI BUILD VARNISH 

Easypoxy Hi-Build Varnish contains an ultraviolet 

light filter in conjunction with a hindered amine light 

stabilizer to screen the sun's damaging rays for longer 

life. Easypoxy Hi-Build Varnish has the highest build 

and film depth per coat, as well as excellent abrasion 

resistance and high gloss. 


Pettit 

SAtIN SHEEN INtERIOR VARNISH 

A pale synthetic resin varnish that dries to a satin 

sheen. It eliminates the hard labour of rubbing down 

a gloss varnish to produce a satin finish. Satin Sheen 

Interior Varnish is ideal for all interior brightwork where high gloss is 

undesirable. This varnish resists water spotting, alcohol and oil. 

PEtV975Q Quart 

Interlux 

ORIgINAL 90 VARNISH 

• High-gloss, clear finish for a wet wood look 

• Hard one-part polyurethane with incredible abrasion 

resistance 

• Excellent UV protection 

• Resistant to water and chemical damage 

90-1L 1 Litre 

Interlux 

JEt SPEED VARNISH 

Jet Speed ® is an exceptionally quick drying varnish 

intended for use when a fast buildup of coats is 

necessary. Under most weather conditions, two coats 

can be applied in one day. 

Jet Speed is not recommended as an exterior finish 

and should be over-coated with a varnish that contains ultraviolet 

filters such as Schooner or Goldspar. 

100-1L 1 Litre 


Interlux 

HIgH gLOSS 

POLYUREtHANE INtERIOR FINISH 

Polyurethane finish for use over Interior Primer 860. With minimum 

surface preparation, great opacity and fast dry times, Interior Finish 750 

is for use in interior spaces where a high gloss, easy clean and robust 

surface is required. Complete coverage in one coat (spray application). 

The primer and finishing systems are "Surface Spread of Flame" 

certified. Professional use only. This is a 2-part paint. 

YIC750 White (9003), 4L 

YIC752 Grey (7035), 4L 

YIC753 Grey (7038, 4L 

YIC755 White (9010), 4L 

YIC751 Converter for top coat 

Interlux 

HIgH gLOSS POLYUREtHANE INtERIOR 

PRIMER 

Fast drying epoxy primer for interior spaces such as bulkheads, bilges, 

engine rooms and behind linings. Dry to walk on after 2.5 hours. Low 

VOC, low odour and minimum surface preparation requirements make 

Interior Primer 860 the ultimate in labour savings. Explore the benefits 

of project efficiencies with Interior Primer 860. The primer and finishing 

systems are "Surface Spread of Flame" 

certified. Professional use only. This is a 

2-part primer. 

YIC862 White, 4L 

YIC866 Grey, 4L 

YIC861 Converter for primer 

Interlux 

FLAttENINg AgENt 

FOR 1 PARt FINISHES 

A Flattening Agent specially formulated for mixing with 

Interlux’s 1 part finishes, Toplac, Brightside, Yacht 

Enamels and varnishes (Original, Goldspar and Schooner) to produce 

a variety of gloss, satin or matte effect finishes. Quart. 

715-1L 

Interlux 

FLAttENINg AgENt 

FOR PERFECtION 

Interlux Flattening Agent for Two Part Polyurethane is 

used to reduce the gloss of Perfection. Quart. 

914KIt 

Awlgrip 

gRIPtEx ® NON-SKID PARtICLES 

73012Q Fine Quart 

73012g Fine Gallon 

73013Q Coarse Quart 

73013g Coarse Gallon 

73237Q Extra-Coarse Quart 

Interlux 

POLYMERIC NON-SKID COMPOUND 

Polymeric non-skid Compound is a man-made plastic 

sphere additive for transforming decks into non-skid 

surfaces. Use with one or two part coatings. 

2398-.25L Pint 

2398-1L Quart

736 


Interlux 

BRIgHtSIDE ® 

With Brightside ® , you can brush on a professional looking 

polyurethane finish that is as bright and shiny as original gelcoat. 

Brightside ® flows on smoothly and evenly; brush strokes disappear 

and dry to a durable, abrasion-resistant finish. It contains an 

advanced ultraviolet package that ensures high gloss and colour 

retention. Brightside ® now contains Teflon ® for better stain and 

abrasion resistance. 

1/2 Pint Quart gallon 

Largo Blue 4100-1L 

Yellow 4152-1L 

Kingston Grey 4190-1L 

Seattle Grey 4205-1L 

Bristol Beige 4207-1L 

Hatteras Off White 4208-1L 

Grand Banks Beige 4217-1L 

Hat Off-White 4218-1L 

Dusk Grey 4233-1L 

Sundown Buff 4237-1L 

Sapphire Blue 4241-1L 

Sea Green 4247-1L 

Red 4248-.25L 

Fire Red 4248-1L 

Steel Grey 4250-1L 

Ocean Blue 4253-1L 

Boottop Black 4258-.25L 

Black 4258-1L 

Blue Glo White 4259-1L 4259-4L 

White 4359-1L 4359-4L 

Dark Blue 4316-1L 

Light Blue 4351-1L 

Medium Blue 4353-1L 

Boottop White 4359-.25L 

White 4359-1L 4359-4L 

Matterhorn White 4360-1L 

Off White 4381-1L 

Boottop Blue 4990-.25L 

Flag Blue 4990-1L 

Brushing Thinner 333-1L 

Spraying Thinner 216-1L 

Primer White 4279-1L 4279-4L 

Primer Grey 4280-1L 

Non Skid Additive 2398-.25L 2398-1L 

Flattening Agent 715-1L 

Interlux 

PERFECtION 

Perfection is a high-gloss two-part polyurethane finish. Its high 

performance formula combines a long lasting abrasion and chemical 

resistant finish with superb protection from the detrimental effects of UV 

filters combined with the chemical cure of the polyurethane to give the 

longest life possible. 

• Hardest, abrasion-resistant finish making it an excellent choice for 

use on high wear areas such as decks 

• Can be applied by brush, roller or spray 

Quart 1/2 gallon 

000KIt Snow White 000KIt-L 

056KIt Fighting Lady Yellow n/a 

070KIt Cream (Hat Off-White) 070KIt-L 

183KIt Platinum n/a 

184KIt Mediterranean white 184KIt-L 

192KIt Off White n/a 

194KIt Oyster White n/a 

198KIt Matterhorn White 198KIt-L 

216KIt Royal Blue n/a 

248KIt Arctic White n/a 

253KIt Pearl White n/a 

299KIt Rochelle Red n/a 

663KIt Jade Mist Green n/a 

936KIt Lauderdale Blue n/a 

990KIt Flag Blue 990KIt-L 

991KIt Mauritius Blue n/a 

999KIt Jet Black n/a 

2333-1L Brushing Thinner n/a 

2316-1L Spraying Thinner n/a 

404/414-1L Epoxy Primer n/a 

914KIt Flattening Agent n/a 

Interlux 

PREMIUM YACHt ENAMEL 

High quality, topside alkyd-based enamel. 

Premium Yacht Enamel is superb for yacht 

applications including topsides, deck and fashion 

striping. A tough finish is achieved that normally 

lasts 2-3 years prior to recoating. 

Quart gallon 

1-1L 1-4L Gloss White 

Interlux 

BILgEKOtE ® 

Bilgekote ® is a fast-drying, durable coating 

formulated for application to bilge areas. 

Bilgekote ® helps prevent absorption of oil, 

gasoline and sludge into wood and fiberglass. 

Quart 

100B-1L Grey 

102-1L White

Pettit 

EASYPOxY 

Easypoxy is a highly rated, one part polyurethane topside paint 

improved by the addition of silicone for brilliant shine and easy 

brushability. It also contains ultraviolet filters which enhance the 

already superior gloss-retention and durability of polyurethane. This 

results in a topside finish that is exceptionally easy to apply and 

produces a lasting gelcoat-like brilliance with a minimum of effort. 

Quart gallon 

PEt3106Qt Semi Gloss White PEt3106gA 

PEt3108Qt Off White PEt3108gA 

PEt3175Qt White PEt3175gA 

PEt3213Qt Blue Ice n/a 

PEt3229Qt Bikini Blue PEt3229gA 

PEt3237Qt Electric Blue PEt3237gA 

PEt3248Qt Ocean Blue PEt3248gA 

PEt3348Qt Jade Green n/a 

PEt3350Qt Kelly Green n/a 

PEt3415Qt Sunflower Yellow n/a 

PEt3518Qt Sand Tone PEt3518gA 

PEt3520Qt Grand Banks Beige n/a 

PEt3624Qt Bright Red PEt3624gA 

PEt3626Qt Burgundy n/a 

PEt3705Qt Mist Grey n/a 

PEt3706Qt Pearl Grey PEt3706gA 

PEt3711Qt Platinum PEt3711gA 

PEt3720Qt Dark Grey n/a 

PEt3801Qt Black PEt3801gA 

PEt12120Qt Brushing Thinner PEt12120gA 

PEt12121Qt Spraying Thinner PEt12121gA 

PEt6149Qt Primer White PEt6149gA 

Pettit 

ENAMELS 

Z-Spar enamels are famous throughout the world for excellent initial 

gloss, high gloss retention and overall long life. They brush out 

beautifully without brush marks. 

Quart gallon 

PEt100Q Gloss White PEt100g 

PEt101Q Semi Gloss White 

PEt104Q Flat White 

PEt101g 

PEt99Q Solid Coat White PEt99g 

PEt105Q Under Coat White PEt105g 


KIWIgRIP 

KiwiGrip anti-slip marine deck coating is a revolutionary, safe, 

durable, non-skid deck treatment that comes out of the can with a 

thick, yogurt-like consistency - but spreads quickly and easily with 

our proprietary roller. KiwiGrip offers a beautiful, consistent, grippy 

surface. By varying the application technique, the texture can be 

adjusted from "fine" to "aggressive". Developed by a New Zealand 

yachtsman for yachtsmen. 

• A very hard acrylic polymer providing a durable, homogeneous, 

elastic anti-skid surface 

• Low-glare, IR reflective finish 

• Homogeneous colour - won't wear through and expose filler 

materials 

• Dial in the perfect texture for your application with our special 

roller cover 

• Apply over wood, fiberglass, epoxy, concrete or metal (following 

the proper primers) 

• Rolls on nicely over other worn non-skid surfaces with only a 

scrub and scuff-up - no need to grind or sand smooth first 

• Non-toxic, no volatile solvents 

• Cleans up with soap and water 

• Coverage: 2 square meters per liter (approx. 80SF/gal) 

KWg1011-1 White, 1L 

KWg1011-4 White, 4L 

KWg1012-1 Grey, 1L 

KWg1012-4 Grey, 4L 

KWg1013-1 Cream, 1L 

KWg1013-4 Cream, 4L 

KWg1020-3 3" roller 

KWg1020-9 9" roller 

Interlux 

INtERDECK ® 

Ready-mixed, low sheen, non-skid finish. 

InterDeck ® provides an excellent, slip-resistant finish with a tough 

polyurethane resin that protects decks against everyday wear and tear. 

It contains a fine aggregate and will apply easily on all substrates. 

InterDeck ® has a low sheen finish to reduce sun glare from decks. 

000-1L White 

089-1L Cream 

684-1L Grey 

009-1L Beige

738 

Zinc, Paint & Accessories

x ® and the Environment Antifoulings 

gh copper antifouling 

ofile on application 

Never a day goes by without an environmental issue being in the news and public awareness of the key 

issues is now greater than ever. Climate change, and the link with man-made greenhouse gas emissions, 

has moved all environmental issues up the agenda of public concern. The environmental focus has entered 

the political arena and calls are being made to reduce the environmental footprint of all of man’s activities. 

Key environmental issues such as air and water pollution, threats to sensitive ecosystems, the ever 

increasing waste mountain and the effects of chemicals in our diet are now also under review with 

a view to further minimizing emissions which may impact our world. The leisure industry is no exception 

to this trend and the yachting and boating industry is experiencing attention from government legislators 

keen to introduce laws reducing emissions into the environment. All aspects of pleasure boating are 

receiving attention – from engines to the chemicals present in paint applied to protect and beautify boats. 

As a coatings supplier, Interlux embraces the challenge of producing effective products for its customers 

to not only comply with tightening environmental laws but also in an effort to work together. Together we 

can make a difference. Together we can reduce our overall environmental footprint. 

Perfection 2-part polyurethane makes it easy to achieve a 

high-quality, high-gloss, mirror-like finish with a brush & roller. 

Perfection cures to a hard, abrasion-resistant finish and 

resists attack by fuels, oils, mild acids and detergents. 

cron Technology and Perfection Fuel Savings uses the latest UV package available today with 

re’s another added benefit to controlled polishing: Fuel Savings!! 

the use of HALS (Hindered Amine Light Stabilizers) which 

fashioned high copper antifouling roughens over time: Micron continues to get smoother over time! 

helps maintain gloss and durability for many seasons. 

er or sail, with today’s fuel prices, a smooth bottom will deliver better fuel efficiency over the long term than old fashioned 

high copper bottom paints. 

Brightside flows on smoothly, brush strokes disappear and 

n Technology reduces it dries emissions to a durable, abrasion resistant finish. An advanced 

ngs 

UV package ensures high gloss and color retention. 

C is based on the Micron Technology platform which means it’s an antifouling that polishes at a controlled rate, 

ng lasting antifouling protection in all waters. 

lled polishing of Micron CSC means it polishes to a smooth surface maximizing fuel efficiencies & reducing build-up 

ing layers. The product can be hauled and re-launched without repainting and Micron uses less copper more efficiently 

shioned high copper bottom paints. 

for power and sailboats 

erformance for 20 years 

es fuel efficiencies 

s copper more efficiently 

enefits of Micron technology 

Topside finishes 

Perfection 

High copper antifouling 

profile after 12 months 

Micron surface profile 

on application 


after 12 months 

Brightside Polyurethane 

A professional looking high gloss polyurethane finish. 

Red 5582 Black 5583 Blue 5580 Green 5581 Shark White 5584 

Proven Industry Leader 

InterProtect ® 2000E 

Fiberglass Bottomkote Act 

Ablative Technology enables it to wash away with use, constantly exposing 

fresh and effective biocide and eliminates the build-up of old spent coatings 

and the heavy sanding needed to remove them. Fiberglass Bottomkote ACT 

provides season to season protection against algae, barnacles and other forms 

of marine fouling in waters with moderate to heavy fouling. It can be applied 

over most existing antifouling as long as the old coating is tightly adhered and 

is in sound condition. 

Snow White 

YHB000 

Fiberglass Bottomkote 

A hard modified-epoxy antifouling paint developed to provide effective 

season-long protection and ease of application. Recommended for use on 

fiberglass, wood, Pearl andWhite properly primed metal Platinum (except aluminum) boat Cream hulls. It can 

be applied overYHS253 most other antifouling paints YHA183 provided they are well YHS070 adhered and 

the surface has been cleaned and sanded. 

Bottomkote XXX 

Lauderdale Blue Royal Blue Mauritius Blue 

Rosin based copper YHS936 antifouling paint forYHA216 all types of fiberglass, wood, YHF991 and steel 

boats. Specially formulated for the cost conscious boat owner requiring a good 

general purpose antifouling paint. 

Tri-Lux II 

Unique copolymer bottom paint, available in a wide range of bright colors. 

Although specifically formulated for aluminum crafts and related surfaces, 

Tri-Lux II is equally compatible with fiberglass, wood, steel and lead. 

Tri-Lux II is ideal for aluminum outdrives and outboard motor lower units; 

provided the application instructions are followed. 

Low Friction for Super Speed 

VC Eco 

VC ® Eco is a hard; Seasuper Green slick, translucentSeattle coating for Gray application belowDusk the waterline. Gray 

Thin film fluoro microadditive 4247 technology provides 4205 a low friction surface that4233 is easy to clean. 

VC Eco is ideal for trailered and rack-stored boats as well as bass boats, ski boats, 

performance boats or any boat where the look of an un-painted boat is desired. Racing 

boats will benefit from reduced drag and increased hull efficiency. VC Eco is biocide free and 

will not prevent growth on the bottom, but is easy to clean with a sponge, soft brush or rag. 


Mediterranean 

White YHA184 

Black 7790 Blue 6690 

Red 449 Black 779 Blue 669 Green 559 Bronze 999 

Red 49 Black 79 Blue 69 

Gray White 7740 

red 491 black 493 blue 490 white 498 

PERFORMANCE COATING: VC17m 

VC 17m is a thin filmWhite antifouling paint for racing Blu-Glo sailboats White and powerboats Hatteras that isOff-White formulated Hatteras Off-White 

with a fluoro microadditive to reduce friction and drag. When applied the VC 17m will 

4359 

4259 

4208 (1990) 4218 

immediately give a hard, super smooth, racing finish. VC 17m incorporates metallic copper to 

achieve complete protection in freshwater or low fouling saltwater. VC 17m is great for use on 

inflatables. 

Red V107E 

Bristol Beige Sundown Buff Grand Banks Light Blue 

COPPER & BIOCIDE FREE4207 BOTTOM PAINT: VC4237 Performance Epoxy Beige 4217 4351 

VC Performance Epoxy is a two-part epoxy, copper and biocide free bottom paint 

with a fluoro microadditive. It has a hard, slick finish ideal for use on theunderwater 

surfaces of high performance powerboats and racing sailboats. The fluoro 

microadditive Ocean adds Bluelubricity 

andSapphire eases wet sanding Blue and burnishing. Dark Blue Flag Blue 

4253 

4241 

4316 

White V127/V128 4990 

InterProtect 2000E is now available in a three gallon unit. The larger packaging is easy to handle and reduces 

overall waste. Interprotect ® 2000E with Micro-plates is a unique two-part epoxy coating developed to protect 

fiberglass hulls from water absorption, which can lead to osmotic blistering. Micro-plates create an overlapping 

barrier to help stop water migration through the coating. Interprotect 2000E can be used above and below the 

waterline as a universal primer for all surfaces and has proven itself to be an excellent primer for all metals. 

It can also be used as part of a fiberglass no- sand system. InterProtect 2000E is available in two colors, 

Gray and White, so you can alternate colors to ensure full coverage. 

■ For Prevention and Repair of Gelcoat Blistering 

■ Universal Primer for Above and Below the Waterline 

■ Excellent for use on Underwater Metals, Hulls and Keels 

■ Now Available in 3 gallon packaging to aid efficiencies in the boat yard 

Interlux Yacht Finishes, 2270 Morris Avenue, Union, New Jersey 07083 Tel: 1 800-468-7589 Fax: 908-686-8545 

For the latest updated information visit our website www.yachtpaint.com 

Translucent YBA305 

® , Interlux ® and the AkzoNobel logo are trademarks of, or licensed to, AkzoNobel. © Akzo Nobel N.V. 2009. Epifanes is a register trademark of Epifanes/W.Heeren & Zoon BV 

Off-White 

YHA192 

Oyster White 

YHA194 

Fighting Lady 

Yellow YHS056 

Flag Blue 

YHK990 

Kingston Gray 

4190 

Matterhorn 

White YHA198 

Rochelle Red 

YHS299 

Black 

YHY999 

Off-White 

4381 

Blue V106E Original V105E 

Medium Blue 

4353 

Yellow 

4152 

Steel Gray 

4250 

Arctic White 

YHS248 

Jade Mist 

Green YHB663 

Matterhorn 

White 4360 

Largo Blue 

4100 

Fire Red 

4248 

Black 

4258

740 


Antifoulings 



There’s another addedAblative benefit toTechnology controlled polishing: enables itFuel to wash Savings!! away with use, constantly exposing 

fresh and effective biocide and eliminates the build-up of old spent provided coatings the application instructions are followed. 

Old fashioned high copper and antifouling the heavy roughens sanding needed over time: to remove them. Micron Fiberglass continues Bottomkote to get smoother ACT over time! 

provides season to season protection against algae, barnacles Low Friction and otherfor forms Super Speed 

High copper antifouling of marine fouling High incopper watersantifouling with moderate to heavy Micron fouling. surface PERFORMANCE Itprofile can be applied COATING: VC17m 

day’s fuel prices, profile a smoothonbottom application will deliver better fuel efficiency over the profile long term after than 12oldmonths fashioned 


tom paints. 

over most existing antifouling as long as the old coating is tightly adhered and Micron surface profile 


logy reduces emissions 


icron Technology platform which means it’s an antifouling that polishes at a controlled rate, 


g protection in all waters. 

season-long protection and ease of application. Recommended for use on 

ron CSC means it polishes to a smooth surface maximizing fuel efficiencies & reducing build-up 

uct can be hauled and re-launched without repaintingfiberglass, and Micron uses less wood, copper more andefficiently properly primed metal (except aluminum) boat hulls. It can 


r bottom paints. 

be applied over most other antifouling paints provided they are well VC Eco adhered and 

oats 


years 

Power or sail, with today’s fuel prices, a smooth bottom will deliver better fuel efficiency over the long term than old fashioned 

iently 

hnology hard high Bottomkote copper bottomXXX paints. Red 5582 Black 5583 Blue 5580 Green 5581 Shark White 5584 

Rosin based copper antifouling paint for all types of fiberglass, wood, and steel 

boats. Specially formulated for the cost conscious boat owner requiring a good 


Antifoulings 

Micron CSC is based on the Micron Technology platform which means it’s an antifouling that polishes at a controlled rate, 

providing long lasting antifouling protection in all waters. 

Tri-Lux II 

The controlled polishing of Micron Unique CSC means copolymer it polishes bottom to a smooth paint, available surface maximizing in a widefuel range efficiencies of bright & reducing colors. build-up 

of old coating layers. The product Although can be hauled specifically and re-launched formulatedwithout for aluminum repainting crafts and Micron and uses related lesssurfaces, copper more efficiently 

than old fashioned high copper bottom Tri-Luxpaints. II is equally compatible with fiberglass, wood, steel and lead. 


■ Suitable for power and sailboats 

provided the application instructions are followed. 

■ Proven performance for 20 years 

■ Maximizes fuel efficiencies 

■ Uses less copper more efficiently 

■ All the benefits of Micron technology 

Low Friction for Super Speed 


VC 17m is a thin film antifouling paint for racing sailboats and powerboats that is formulated 


immediately give a hard, super smooth, racing finish. VC 17m incorporates metallic copper to 


inflatables. 

COPPER & BIOCIDE FREE BOTTOM PAINT: VC Performance Epoxy 




microadditive adds lubricity and eases wet sanding and burnishing. 

VC Eco 

VC ® Eco is a hard; super slick, translucent coating for application below the waterline. 

Thin film fluoro microadditive technology provides a low friction surface that is easy to clean. 





VC 17m is a thin film antifouling paint for racing sailboats and powerboats that is formulated 


immediately give a hard, super smooth, racing Black finish. 7790 VC 17m incorporates Blue 6690 metallic copperGray to White 7740 


inflatables. 

Red V107E Blue V106E Original V105E 




Red V107E 

White V127/V128 


Blue V106E Original V105E 

prov 

Low Fric 

PERFORMANC 

VC 17 

with a 

immed 

Micron Technology reduces emissions 

Antifoulings 

achiev 

inflatab 

COPPER & BIO 

Micron CSC is based on the Micron Technology platform which means it’s an antifouling that polishes at a controlled rate, 

providing long lasting antifouling protection in all waters. 

The controlled polishing of Micron CSC means it polishes to a smooth surface maximizing fuel efficiencies & reducing build-up 

of old coating layers. The product can be hauled and re-launched without repainting and Micron uses less copper more efficiently 

than old fashioned high copper bottom paints. 

■ Suitable for power and sailboats 

■ Proven performance for 20 years 

■ Maximizes fuel efficiencies 

■ Uses less copper more efficiently 

■ All the benefits of Micron technology 

VC 

VC ® 

Power or sail, with today’s fuel prices, a smooth bottom will deliver better fuel efficiency over the long term than old fashioned 

hard high copper bottom paints. 

Interlux 

e Environment Antifoulings 




issues is now greater than ever. Climate change, and the link with issues man-made is now greenhouse greater gas emissions, than ever. Climate change, and theAblative link with Technology man-made enables it togreenhouse wash away with use, gasconstantly emissions, exposing 

has moved all environmental issues up the agenda of public concern. The environmental focus has entered 

fresh and effective biocide and eliminates the build-up of old spent coatings 

has moved all environmental issues up the agenda of public 

the political arena and calls are being made to reduce the environmental footprint of all of man’s activities. 

and theconcern. heavy sanding The needed environmental to remove them. Fiberglass focus has Bottomkote entered ACT 

provides season to season protection against algae, barnacles and other forms 

Key environmental issues such as air and water pollution, threats the to sensitive political ecosystems, arena and the ever calls are being made to reduce the environmental footprint of all of man’s activities. 

of marine fouling in waters with moderate to heavy fouling. It can be applied 

increasing waste mountain and the effects of chemicals in our diet are now also under review with 

Key environmental issues such as air and water pollution, over threats most existing to sensitive antifouling asecosystems, long as the old coating theisever tightly adhered and 



to this trend and the yachting and boating industry is experiencing increasing attention fromwaste government mountain legislators and the effects of chemicals in our diet are now also under review with 

keen to introduce laws reducing emissions into the environment. All aspects of pleasure boating are 





As a coatings supplier, Interlux embraces the challenge of producing to this effective trendproducts and for theits yachting customers and boating industry is experiencing season-long protection attention and ease fromof application. government Recommended legislators for use on 

to not only comply with tightening environmental laws but also in an effort to work together. Together we 

fiberglass, wood, and properly primed metal (except aluminum) boat hulls. It can 

keen to introduce laws reducing emissions into the environment. be applied over Allmost aspects other antifouling of pleasure paints provided boating they are well adhered and 





ology and Fuel Savings 

As a coatings supplier, Interlux embraces the challenge of producing effective products for its customers 

Rosin based copper antifouling paint for all types of fiberglass, wood, and steel 

d benefit to controlled polishing: Fuel Savings!! 

to not only comply with tightening environmental laws but boats. also Specially in anformulated effort for tothe work cost conscious together. boat Together owner requiring wea 

good 



pper antifouling roughens over time: Micron continues to get smoother over time! 


Black 7790 Blue 6690 Gray White 7740 


Thin 

VC E 

perfo 

boat 

will n 


Green 5581 Shark White 5584 

® and the Environment Antifoulings 


Ablative Technology enables it to wa 

fresh and effective biocide and elim 

and the heavy sanding needed to r 

provides season to season protecti 

of marine fouling in waters with mod 

over most existing antifouling as lon 



A hard modified-epoxy antifouling p 

season-long protection and ease of 

fiberglass, wood, and properly prim 

be applied over most other antifoulin 

the surface has been cleaned and s 

High copper antifouling 

profile after 12 months 



Micron Technology and Fuel Savings 


Micron Technology reduces emissions 

Tri-Lux II 

Unique copolymer bottom paint, available in a wide range of bright colors. 

Although specifically formulated for aluminum crafts and related surfaces, 

Tri-Lux II is equally compatible with fiberglass, wood, steel and lead. 


COPPER & BIOCIDE FREE BOTTOM PAINT: VC Performance Epoxy 




microadditive adds lubricity and eases wet sanding and burnishing. 

VC ® Eco is a hard; super slick, translucent coating for application below the waterline. 

Thin film fluoro microadditive technology provides a low friction surface that is easy to clean. 





Red 5582 Black 5583 Blue 5580 Green 5581 Shark White 5584 


White V127/V128 



Rosin based copper antifouling pain 

boats. Specially formulated for the c 


Tri-Lux II 

Unique copolymer bottom paint, av 

Although specifically formulated for 

Tri-Lux II is equally compatible with f 

Tri-Lux II is ideal for aluminum outdri 

provided the application instructions 

Low Friction for Super 


VC 17m is a thin film antifouling paint for r 

with a fluoro microadditive to reduce frictio 

immediately give a hard, super smooth, ra 

achieve complete protection in freshwater 

inflatables. 

COPPER & BIOCIDE FREE BOTTOM PAIN 

VC Performance Epoxy is a tw 

with a fluoro microadditive. It h 

surfaces of high performance 

microadditive adds lubricity an 

VC Eco 

VC ® Eco is a hard; super slick, transluce 

Thin film fluoro microadditive technology 

VC Eco is ideal for trailered and rack-sto 

performance boats or any boat where th 

boats will benefit from reduced drag and 

will not prevent growth on the bottom, b

Zinc, Paint & Accessories 741

742 


Pettit 

WHItE ENAMEL UNDERCOAt 

A high filling, easy sanding marine type 

undercoat designed for use on wood 

surfaces. Provides a smooth base that allows 

Z-Spar Enamel to dry to a uniform gloss and 

appearance. 

PEt105Q Quart 


Interlux 

BRIgHtSIDE PRIMER 

Brightside Primer is a unique V.O.C. compliant, 

single package, undercoater formulated for use 

with Brightside Polyurethane or any one part 

topside finish. Microshperes are used to give Brightside Primer superior 

build and hide while improving flow and sandability. Brightside Primer is 

used anywhere above the true waterline where a coating is needed to 

provide a smooth, fair surface for overcoating with a topside enamel. 

4279-1L Quart white 

4279-4L Gallon white 

4280-1L Quart grey 

Pettit 

EASYPOxY UNDERCOAt 

Should be used as a base coat whenever the 

surface to be painted is aged, cracked, checked, pitted or in any way 

less than smooth. It can be applied to fiberglass, wood and previously 

painted surfaces. It dries quickly and is easy to sand. White. 



Interlux 

EPOxY BARRIER-KOtE 

Epoxy Barrier-Kote is the recommended 

primer for use with two-part finishes such as 

Perfection and can also be overcoated with 

Brightside, Interlux Yacht Enamel, Interdeck and Bilgekote. Use Epoxy 

Barrier-Kote over clear epoxies as a sanding surfacer and to eliminate 

the effects of amine blush. Epoxy Barrier-Kote is bright white. Quart. 

404/414-1L 

Interlux 

VINY-LUx PRIMEWASH 

• Fast overcoating times 

Viny-Lux Primewash is a two part zinc 

chromate, vinyl butyral self etch primer, that is 

used as a metal conditioner for adhesion prior to application of 

other paints on metal. 

353/354-1L Quart 

355-1L Thinner quart 

Pettit 

2018 CLEAR SEALER 

This is a phenolic resin-based sealer used for priming all types of raw 

wood prior to painting. The sealer acts as a moisture barrier layer to 

prevent peeling and excessive absorption of vehicle from undercoater 

or varnishes by the new wood. 2018 Clear Sealer can be used under all 

Pettit one-part undercoaters, varnishes and topside finishes. Quart. 

PEt2018Qt 

Interlux 

CLEAR WOOD SEALER 

Stops varnish from soaking into the wood and seals the 

grain, thereby enabling subsequent coats of varnish or 

paint to dry without "high and low" spots. This sealer 

is particularly recommended for sealing plywood to resist cracking and 

checking. Quart. 

1026-1L 

Interlux 

CLEAR WOOD SEALER 

• Fast drying formula, multiple build coats in one day 

• For professional use 

A fast drying wood sealer with excellent film build. Suitable for priming 

wood prior to application of single pack varnishes or two component 

urethane finishes. Due to its grain-filling properties, the use of Clear 

Wood Sealer will cut down on the total number of coats required. The 

fas drying formulation allows applicators to apply multiple coats in one 

day. 

YVA327 Base, 1L 

YVA328 Curing agent, 1L 

Pettit 

RUStLOK StEEL PRIMER 

A one package moisture cured polyurethane 

coating designed for application over any steel 

or cast iron surface, including galvanized or 

stainless steel. Rustlok Steel Primer contains 

aluminum flake pigment which forms a dense, 

water impervious barrier. The result is excellent 

corrosion protection. In addition, Rustlok's 

polyurethane chemistry offers tremendous adhesive strength 

and wetting ability. It is this combination that allows Rustlok to 

perform well even when applied over rusted surfaces. It's an 

easy-to-apply, effective, anti-corrosive barrier coating. 



Pettit 

MEtAL PRIMER 

Metal Primer is made for metal application where 

a primer is needed to provide adhesion plus offer 

corrosion and rust resistance above and below 

the waterline. It uses a corrosion inhibitive pigment to keep metal 

surfaces in good condition. Metal Primer must be overcoated 

with either 6627 Tie-Coat Primer or 4777/4778 High Build Epoxy 

Primer prior to the application of anti-fouling bottom paints or 

topside finishes. Quart. 

PEt6455/044Qt

Interlux 

PRIMOCON ® 

An anticorrosive primer for underwater metal 

surfaces including hulls, running gear and the lower 

units of outboards and I/Os. Primocon can be used 

as a conversion coating over unknown well-adhered 

antifouling paint to prevent cracking of new antifouling paint. 

Apply Primocon to freshly sand-blasted surfaces over Viny-Lux 

Primewash primer or to previously painted surfaces. 

984-1L Quart 

984-4L Gallon 

Interlux 

FIBREgLASS 

NO SAND PRIMER 

Fibreglass No Sand Primer is designed to eliminate 

the need to sand prior to applying antifouling paint to 

new or unpainted boats. When over coat window is 

met, there is a strong chemical bond between primer 

and antifouling paint. Quart. 

200-1L 

Pettit 

SANDLESS FIBERgLASS 

PRIMER 

Eliminates the need to sand before applying 

antifouling paint. It is a pretreatment primer 

designed to adhere tenaciously to unsanded 

fiberglass gelcoats. When properly topcoated with 

antifouling paint, the primer and antifoulant will bond 

together strongly, resulting in a finish with excellent 

overall adhesion. Sandless Primer is ideal over 

vinylester gelcoats where sanding of the gelcoat may void osmotic 

blister warranties. It may be used over conventional gelcoats as well, 

and as a tie coat between two part epoxy primers and antifouling paints. 

Quart. 

PEt6999Qt 

Pettit 

tIE COAt PRIMER 

A general purpose chlorinated rubber type 

product used as a primer on metal surfaces and 

as a tie coat between different types of coatings. 

This versatile product can be used successfully 

above and below the waterline. Can also be 

used on new and bare wood on boat bottoms 

to seal the wood before applying an antifouling 

paint. 




EP-PRIME 1000 HIgH BUILD EPOxY 

PRIMER 

Recommended for immersion service, EP-Prime 1000 is 

recommended as a corrosion inhibiting, protective barrier coating 

for metal surfaces. A two component product; the entire contents 

of each container must be mixed together. 

• Easy to apply 

• Surface tolerant 

• Cures at low temperatures 

• Low VOC 

P1000-505 Red, gallon 

P1000-705 Haze grey, gallon 

Aquagard 

AQUAgARD II SPRAY PRIMER 

Use on aluminum and other non-ferrous metals. Ideal 

for use as corrosion protection on stern drives and 

outboards. Dries fast, excellent abrasion and solvent 

resistance. 

AQg20309 

Aquagard 

181 FIBERgLASS SOLVENt BASE PRIMER 

For aluminum, fiberglass and wooden surfaces. 

• Only requires one coat 

• Formulated to be used prior to anti-fouling 

paint 

• Improves adhesion of final coat 

• Apply with brush or roller 


AQg20100 Gallon 

Aquagard 

WAtERBASE 190 PRIMER 

• Chemically bonds to aluminum 

• Excellent resistance to corrosion and salt 

• Improves adhesion of final coat 

• Compatible with all other top coats 

• Scientifically formulated for use with Alumi-Koat antifouling paint 

• Exceeds VOC standards 

• Cleans up with soap and water 


AQg25109 Gallon

744 


Interlux 

INtERPROtECt 2000E/2001E ® 

41% solids, grey two-part epoxy. InterProtect 2000E / 2001E is a 

coating developed to protect new and used fiberglass hulls from 

water absorption. It can also be used to repair gelcoat blistered 

hulls. On boats where the gelcoat has been removed and bare 

laminate is exposed, use InterProtect 1000/1001 as a sealer coat. 

• Prevents and repairs osmosis on new and blistered hulls 

• Protects underwater metals such as keels, struts, shafts and 

running gear 

2000/2001-1L Grey 1 Litre 

2000/2001-4L Grey 4 Litre 

2002/2001-1L White 1 Litre 

2002/2001-4L White 4 Litre 

Pettit 

PEttIt PROtECt 

HIgH BUILD EPOxY PRIMER 

A heavy-duty, high build, two component epoxy-polyamide coating 

for use where maximum resistance to fresh or salt water is required. 

The complete coating system is resistant to water, many industrial 

chemical fumes and very humid environments. It is ideally suited to 

many commercial and pleasure craft applications and has excellent 

durability in exterior exposures. Like most epoxies, it will chalk if not 

topcoated. 

• Reduces water absorption in fiberglass hulls and prevents 

osmotic blistering 

• High film build for maximum protection with fewer coats 

• Excellent water and chemical resistance 

• Exceptional protection for steel, aluminum and other metals 

• High performance system for underwater running gear 



Interlux 

VC PERFORMANCE EPOxY 

VC Performance Epoxy is a two-part Teflon® bearing epoxy that has 

a hard, slick finish ideal for use on the underwater surfaces of high 

performance powerboats and racing sailboats. Teflon® adds lubricity 

and eases wet sanding and burnishing. 

VC Performance Epoxy’s hard, stain-resistant finish is also ideal for 

rack-stored and trailered boats or boats that are kept in the water 

not requiring antifouling protection. VC Performance Epoxy has no 

antifouling or foul release properties. 

V127KIt-S 1/2 gallon kit 

V127KIt-L 2 gallon kit 

Interlux 

INtERPROtECt ® WAtERtItE 

EPOxY FILLER 

Epoxy putty for use with the InterProtect System. 

InterProtect Watertite is a two-part, easy-to-use epoxy 

compound for filling holes and scratches in gelcoat and 

fiberglass. It is especially recommended for use to fill 

blisters in an osmotic blister repair system, such as the InterProtect 

Epoxy Barrier System. Its unique two-phase cure gives it a long, easyto-sand 

window. 

V135KIt Quart 

V135KIt-SM Pint 

Aquagard 

AQUAgARD II SPRAY ALUMI-KOAt 

A solvent based paint for use on aluminum and other non-ferrous 

materials. Ideal for use on sterndrive and outboard lower unit corrosion 

protection. 

AQg71301 Black 

AQg71310 Clear 

AQg71309 Gray 

AQg71307 Off White 

Interlux 

tRI-LUx II 

Specially formulated for use on underwater aluminum surfaces such as 

hulls and lower units of outboards and I/O's but is equally compatible on 

fiberglass, wood or other underwater metals. Tri-Lux II does not contain 

tributyltin (TBT). When properly primed, Tri-Lux II does not cause 

galvanic corrosion, as do paints that contain cuprous oxide. Due to the 

fast acting nature of Tri-Lux II, three full coats are recommended and 

four coats should be applied in tropical waters. 

Quart gallon 

490-1L 490-4L Blue 

n/a 491-4L Red 

493-1L 493-4L Black 

498-1L 498-4L White 

Aquagard 

AQUAgARD II ALUMA-KOtE 

Designed for coating the bottom of aluminum boats, sterndrives and 

outboards. The product is tin free, contains silicone, which offers similar 

performance as the recently banned tin-based products for marine 

applications. The paint relies on a "non-stick" principle to minimize 

fouling adhesion to the surface through the use of a silicone agent. 

Quart gallon 

AQg80001 AQg80101 Black 

AQg80006 AQg80106 Blue 

AQg80007 AQg80107 White 

AQg80002 AQg80102 Red

Pettit 

HORIZONS 

Horizons has a high cuprous oxide content and 

the latest ablative copper polymer technology to 

provide superior controlled-rate bottom protection. 

Unlike conventional bottom paints where the 

toxicants must leach out through a hard permanent paint film, ablative 

paints expose fresh toxicants by wearing away at a controlled rate. For 

this reason, ablatives don't need as high a cuprous oxide content as 

conventional paints. Even so, Horizons has more cuprous oxide than 

many conventional paints, ensuring exceptional antifouling performance, 

even under severe fouling conditions. 

Due to Horizons' ablative action, buildup is greatly reduced along with 

labour and expense. Horizons may be hauled and relaunched without 

recoating. 

Quart gallon 

PEt1250Qt Blue PEt1250gA 

PEt1350Qt Green PEt1350gA 

PEt1650Qt Red PEt1650gA 


Interlux 

MICRON ® CSC 

• Longest lasting, multi-season - ability to haul 

and re-launch without repainting 

• Controlled polishing like a bar of soap 

reduces paint build up, eliminating the need 

for sanding 

• Micron Technology polishes to a smoother surface than hard 

antifoulings - maximizing fuel savings 

• Unlike old fashion high copper bottom paints, Micron uses less 

copper more efficiently for longest lasting antifouling protection 

Quart gallon 

5580-1L Blue 5580-4L 

5581-1L Green n/a 

5582-1L Red 5582-4L 

5583-1L Black 5583-4L 

5584-1L Shark White 5584-4L 

Interlux 

FIBERgLASS BOttOMKOtE ® ACt 

Ablative copolymer technology antifouling paint. Provides premium 

antifouling protection in moderate to heavy fouling areas. It is 

compatible with any other antifouling paint. It washes away with use, 

constantly exposing fresh biocide throughout the boating season, thus 

eliminating the build-up of old coatings and the heavy sanding required 

to remove them. It can be hauled for up to 30 days and relaunched 

without losing antifouling effectiveness. It does not retain its antifouling 

ability for seasonal out-of-water storage. Do not use on aluminum. 

Quart gallon 

6690-1L Blue 6690-4L 

7740-1L Grey White 7740-4L 

7790-1L Black 7790-4L 


Pettit 

PREMIUM PERFORMANCE 

Pettit's Premium Performance antifouling provides maximum protection 

from fouling of all kinds. Concentrated copper guards against 

attachment of barnacles, algae and other fouling organisms. 

Pettit Premium Performance antifouling applies easily and dries quickly. 

May be used over old antifouling finishes in good 

condition. Ideal for wood, fiberglass and properly 

primed steel boats. 

Quart gallon 




Pettit 

UNEPOxY 

An affordable general purpose antifouling paint for use on boat 

bottoms. It has excellent adhesion to fibreglass, wood and properly 

primed steel hulls and is perfect for both power and sail. It can be 

applied over most aged hard antifouling coatings 

without fear of lifting. It's hard finish makes it suitable 

for trailered boats. 

Quart gallon 




Interlux 

FIBERgLASS BOttOMKOtE ® 

The standard against which all other antifouling paints are measured. 

It can overcoat any existing bottom coat. It offers solid protection 

against all types of fouling, including zebra mussels. 

Do not use on aluminum. 

Quart gallon 

449-1L Red 449-4L 

559-1L Green 559-4L 

669-1L Blue 669-4L 

779-1L Black 779-4L 

999-1L Bronze 

Interlux 

EPOxYCOP 

A hard smooth antifoulant for powerboats and sail. Can be applied over 

most antifouling paints. Best value where price per foot matters. 

Quart gallon 

K52-1L Black K52-4L 

K51-1L Blue K51-4L 

K53-1L Green K53-4L 

Red K50-4L 

Interlux 

tARR & WONSON 

ANtIFOULINg 

For medium and slow speed boats, recommended 

for vessels remaining underway or offshore. 25% 

cuprous oxide gives strong protection in moderate 

fouling waters. Seasonal renewal needed. 

506g Black 

516g Blue

746 


Interlux 

BOttOMKOtE xxx 

A proven performer in both the coastal and inland 

areas of Canada. Providing excellent value to 

boaters, this antifouling can be applied over all 

properly prepared existing coatings and substrates (except aluminum). 

The soft paint film of Bottomkote XXX allows for easy cleaning and 

minimal paint build-up. Do not use on aluminum. 

Quart gallon 

49-1L Red 49-4L 

69-1L Blue 69-4L 

79-1L Black 79-4L 

Interlux 

VC ® 17m tEFLON ANtIFOULINg 

VC 17m is a highly efficient, hard, thin-film antifouling 

giving a low friction Teflon ® finish. 

Special properties: 

• Super-smooth surface without sanding 

• The ultimate in low friction finishes, improves boat speed 

• Easy application and no thick film build-up 

• Recommended for use on dry sailed boats and in 

areas of relatively light fouling 

V106-1L Blue - 3/4 Litre 

V105-1L Original - 3/4 Litre 

V107-1L Red - 3/4 Litre 

Interlux 

VC ® OFFSHORE ANtIFOULINg 

VC Offshore is a high-performance, hard, 

scrubbable antifouling containing Teflon ® . 

• Hard, non-eroding film 

• Smooth, thin film technology 

• Suitable for all substrates; aluminum must be 

primed 

• Recommended for areas with difficult fouling 

V116-4L Blue - 4 Litre 

V118-4L Black - 4 Litre 

V172-1L Thinner - 1 Litre 

Interlux 

VC ECO tEFLON 

VC Eco is a hard; super slick, translucent coating 

for trailered and rack-stored boats as well as bass 

boats, ski boats and performance boats. VC Eco 

is biocide free and will not prevent growth on the 

bottom, but is easy to clean with a sponge, soft 

brush or rag. Quart. 

YBA305-1L 

Aquagard 

WAtERBASE ANtIFOULINg PAINt 

Aquagard is a water based antifouling with ablative action. It is fast 

drying, easy to clean up and can be applied with brush, roller or spray. 

Aquagard is designed to be used over previously painted or wooden 

boats without the need of primers. After application, the boat may be 

stored up to 12 months before launching. 

Quart gallon 2 gallon 

AQg10001 AQg10101 AQg10201 Black 

AQg10002 AQg10102 AQg10202 Red 

AQg10003 AQg10103 AQg10203 Blue 

AQg10004 AQg10104 AQg10204 Green 

AQg10006 AQg10106 AQg10206 Horizon Blue 

AQg10007 AQg10107 AQg10207 Shark White 


SUNWAVE BOttOM PAINt 

An economically priced, eco-friendly, photoactive, scrubbable release 

coating designed to provide a hard, mar-resistant finish to stand up to 

periodic maintenance scrubbing. It is water-based, does not contain 

pesticides and is verly low VOC. Like all ePaint bottom coatings, it is 

copper free and incorporates ePaint's patented photoactive technology 

and ablative resin chemistry to slowly wear away over time preventing 

heavy paint buildup. SUNWAVE will not promote galvanic corrosion of 

metal and is safe to apply directly on bare aluminum surfaces. This is a 

two part product. 

• For use on fiberglass, aluminum, outboards, outdrives and trim tabs 

• Self-priming on aluminum surfaces 

• Safe to to haul boat in and out out of water water 

SW-402-Q White, quart 

SW-402-g White, gallon 

SW-702-Q Grey, quart 

SW-702-g Grey, gallon 


EP-21 BOttOM PAINt 

An economically priced, biocide-free photoactive release coating 

designed for a single season of protection. EP-21 releases biofouling 

by eroding like a bar of soap. It is safe to use on aluminum, fiberglass, 

wood, outboards, outdrives, trim tabs, compatible with most epoxy 

primers and over hard-type existing antifouling paint systems. For bare 

metal, first coat with EP-Prime 1000 corrosion inhibiting primer. 

• Solvent-based fast drying formula, multiple coats per day possible 

• No maximum dry-to-launch times 

• Safe to haul in and out of water 

EP21-401-Q White, quart 

EP21-401-g White, gallon 

EP21-701-Q Grey, quart 

EP21-701-g Grey, gallon 

NF-t-EP13Q Thinner, quart 

NF-t-EP13g Thinner, gallon

NYALIC COAtINg 

NYALIC ® (“nigh AL ick”) is a nylonic, crystal clear, polymer resin coating 

that provides years of protection against chemical and ultraviolet 

corrosion on ferrous and non-ferrous metals, galvanized, anodized and 

painted surfaces. It also works well on fibreglass, wood, concrete and 

stone. Nyalic can be used on any metal, painted surface or fibreglass. 

Because it is impermeable, Nyalic is highly corrosive resistant. It lasts 

from 5 to 10 years on metal, up to 2 years on 

fibreglass. It can be maintained indefinitely and 

re-coated with no sanding required. It’s also nonconductive, 

so it fights harmful electrolysis. 

• Easy to apply 

• Self leveling and self annealing 

• Easily re-coated: self priming 

• Cleans up fast with just soap and water 

• Single pack - no mixing, 

• Impermeable, smooth, clear finish 

• Non-conductive, prevents harmful electrolysis 

• One gallon covers 1200 square feet 

• Blocks ultraviolet radiation, will not yellow 

• Restores faded or oxidized surfaces to a like-new 

appearance 

NYA101g Gallon 

SIMPLE PREP 

Biodegradable, all purpose cleaner and degreaser. 

Formulated with a non-residue surfactant system. 

NYA119Q Quart 

NYA1195g 5 gallon 

RIgHt RINSE 

Concentrated, biodegradable, free-rinsing surface cleaner. 

NYA128Q Quart 

BUILDINg PREP 

A concentrated, biodegradable, caustic-based cleaner and degreaser. 


tUFF PREP 

Biodegradable, powdered surface cleaner. 


CRC 

ZINC MAtE 

• Zinc-rich galvanized coating protects metal surfaces 

against salt water corrosion and harsh elements 

• Protects base metal through sacrificial action 

• Fights rust creepage 

• Protects like "Hot Dip" Galvanizing 

• Matte grey colour 

• 370g 

CRC75054 

Pettit 

ZINC COAt 

• 93% pure zinc in the dried film 

• Fast dry formula in an easy to use aerosol spray can 

Provides protection for bare metals including steel, stainless 

steel, cast iron, copper, bronze, galvanized steel and lead. 

It forms an excellent bond to underwater metals and running 

gear, and inhibits corrosion on these surfaces. Not for use 

on aluminum surfaces. 

PEt1792 


Scepter 

ENgINE PAINt 

Heat and solvent resistant acrylic lacquer is formulated for the 

extended staying power that boat engines need. 

• Colour matched to your engine's original colour 

• For use on all outboard & inboard engines, stern drive and lower 

unit applications 

025103 Cummins Tan 

025350 Mercury Phantom Black (1960-Pres.) 

025425 Johnson White (1964-76) 

025436 Volvo Aquamatic White (1989-Pres.) 

025461 Johnson/Evinrude White (1972-Pres.) 

025469 Yamaha Metallic Blue Silver (1985-90) 

025478 OMC Charcoal Non-Metallic (1986-Pres.) 

025479 OMC Charcoal Metallic (1985-Pres.) 

025488 Volvo Stern Drive Grey (1989-Pres.) 

025513 Tohatsu Light Grey Metallic (1984-Pres.) 

025516 Honda Silver Metallic 

025107 Evenrude Blue Metalic 

025433 Johnson White (1977-80) 

025454 Johnson/Evenrude Light Blue metalic (1978-87) 

025515 Yamaha Dark Blue Metalic (1994-97) 

Scepter 

COLOR VISION 

• Colour matched to your engine's original colour 

• Formulated for the marine environment 

• Quick-dry formula 

025104 Caterpillar Yellow 

025203 Gloss Black 

025320 Chris Craft Blue 

025473 Volvo Green 

025491 Crusader Blue 

025475 Fuel Tank Red 

025340 Chrysler Blue 

Scepter 

CLEAR COAt 

• For use on all outboard & inboard engines, stern 

drive and lower unit applications 

• Quick-dry formula 

• Enhanced UV protection 

025519 

Scepter 

ZINC PRIMERS 

For aluminum surfaces above or below the waterline 

use our Zinc Chromate. This powerful primer etches 

into the aluminum, forming a strong surface/primer 

union that is resistant to corrosion. 

025421 Zinc Chromate Yellow 

025472 Zinc Chromate Green 

Scepter 

SANDABLE PRIMER 

For surfaces above the waterline, including bare metal, 

steel, iron, fiberglass and wood. Grey. 

025740

748 


TOPCOATS - AWLGRIP® & AWLCRAFT® 2000 

BEYOND JUST GOOD LOOKING 

Awlgrip manufactures two different topcoats to 

meet the needs of a dynamic market. The 

Awlgrip topcoat uses a polyester urethane 

resin, whilst Awlcraft 2000 uses an acrylic 

resin. The difference is molecular size. 

Polyester molecules are much smaller than 

acrylic molecules. A given volume of 

polyester resin contains many more 

molecules than the same volume of acrylic 

resin. Thus the polyester has more reaction 

sites than the acrylic. When both are fully 

crosslinked, the polyester forms a tighter, 

tougher film. The more dense crosslinking 

provides a harder, more abrasion resistant 

film, with better chemical resistance than the 

acrylic film. 

High crosslink density yields better chemical 

and abrasion resistance. It also yields a rigid 

film. In today’s marketplace there is a need 

for both acrylic and polyester urethane 

technology. Both resins will resist staining 

and provide long lasting gloss. 

Application characteristics, chemical and stain 

resistance, repairability, and cure times all 

need to be considered when choosing a 

urethane. 

Polyester Urethane Topcoat 

• High performance urethane topcoat systems. 

• Recognized world-wide for 30 years. 

• Full product range of coating systems for all substrates. 

• Can be applied by spray or brush/roll. 

• Premium acrylic urethane topcoat. 

• Superior flow-out and high gloss. 

• Ease of application. 

Acrylic Urethane Topcoat 

TOPCOAT SYSTEMS CARE ABOVE THE WATERLINE 

HOW THEY WORK 

Crosslinked, two component polyurethanes 

dry when the solvent evaporates. Then they 

cure as the components react to form the 

urethane molecule. The more crosslinks, the 

more durable the final finish. But keep in 

mind, a longer cure time is needed for the 

coatings to reach this durable, final finish. 

Coatings with a relatively long cure time 

allow the pigments to migrate toward the 

substrate. A resin-rich wear layer forms, 

much like the clear urethane film on a 

“no wax” floor. 

This resin-rich layer provides long term 

protection for the pigment particles, improves 

color and gloss retention, and provides the 

deep gloss associated with high quality 

urethanes. 

THERE’S A SYSTEMATIC APPROACH 

Be cautioned however! Choose the topcoat 

you require for your project first, then 

investigate the primer system to support the 

topcoat performance. AWLGRIP offers a 

complete line of chemically compatible 

primers, fairing compounds and surfacers 

to support its topcoats. 

• For use above the waterline only. 

• Excellent color retention and chemical resistance. 

• Custom colors available. 

• Fast drying to reduce dust entrapment. 

• For spray application only. 

• For use above the waterline only. 

• Custom colors available. 

Wash Down Concentrate FIBERGLASS, -73234 GELCOAT, COMPOSITE, & WOOD 

An effective detergent for cleaning, yet still gentle enough for frequent use on AWLGRIP and AWLCRAFT 2000. 

AWLWASH has been extensively tested in AWLGRIP’s laboratories and in the harsh yacht environment. 

Prepare • AWLWASH Substrate does not contain alkalies, acids, or abrasives, Clean, and sand, is free grind rinsing, or which blast decreases (as necessary). drying time. 

• AWLWASH is 100% biodegradable and comes in a refillable, “Tip ‘N Measure” container, which makes it easy to get the 

proper mix ratio: One ounce of AWLWASH per gallon of water. 

Substrate Sealer / Surfacer 

Apply Hullgard Epoxy Primer or Apply High Build Primer 

Protective Polymer Sealer - 73240 

Awlgrip Ad Yellow Boat 210x297 17/3/06 14:45 Page 1 

Epoxy Apply AWL®FAIR L.W., AWLFAIR L.W.T. 

AWLGRIP Fairing developed Compound AWLCARE for customers who want to protect their painted finish and need 

and/or 

the additional 

Sprayable 

cleaning 

Fairing 

power 

Compound 

of a hand applied product. AWLCARE will help temporarily seal and restore shine to painted surfaces that have become 

porous due to age or mistreatment. Once a painted surface becomes porous it allows dirt to collect on the surface making 

Apply ULTRA BUILD depending on surface condition. 

Epoxy Surfacers Apply High Build depending on surface condition. 

the normal washing process more difficult. Regular applications of AWLCARE will help seal or the porosity, helping to maintain a satisfactory 

appearance until there is time to repaint. 

• AWLCARE contains no harsh abrasives and will not scratch the painted surface. 

Finish • AWLCARE Primers leaves a non-yellowing, Apply 545 Epoxy protective Primer polymer for Spray coating Application which lasts through multiple or Apply washings. AWL-QUIK for Brush Application 

• AWLCARE removes mild stains such as water spots and diesel soot and with regular applications, increases resistance to 

attack from acid rain and other environmental pollutants. 

Apply AWLGRIP® Topcoats 

Topcoat 

or Apply AWLCRAFT® 2000 Topcoat 

For Professional Use Only 

Details for application, preparation, and mixing of the above steps can be found in the Awlgrip Application Guide 

or on the website: www.awlgrip.com 

Contact our sales department for more information 

Do not mix any components, other than 

those manufactured by AWLGRIP, into the 

AWLGRIP system. 

AWLGRIP provides detailed instructions for 

care and maintenance of topcoats, including 

mild but effective products such as 

AWLWASH and AWLCARE to selp 

maintain the high gloss urethane topcoats. 

This in fact is the AWLGRIP coating 

advantage –performance delivered through 

a complete coating system. 

I T’S G O T T A B E 

THIS IS A PROFESSIONAL USE 

PRODUCT. 

AWLGRIP 

The world’s finest boats and largest yachts demand it: a shine so lustrous, so deep – so 

unmistakably Awlgrip. When you finish with Awlgrip, you get a topcoating system that is 

as durable and consistent as it is beautiful. And with a full spectrum of colors, Awlgrip 

provides truly innovative solutions and unmatched global support, giving you help – and 

answers – wherever you go. When you want it all, it’s gotta be Awlgrip. www.awlgrip.com 

NORTH AMERICA 1 East Water Street Waukegan Illinois 60085 TEL: 847.599.6212 FAX: 847.599.6209 

EUROPE Bannerlaan 54 2280 Grobbendonk Belgium TEL: 32.14.25.7770 FAX: 32.14.23.0880 

AUSTRALIA Unit E54 Gold Coast City Marina 76 Waterway Drive Coomera Queensland 4209 Australia 

TEL: 61.7.5573.9655 or 1800.007.866 FAX: 61.7.5573.9677 

Awlgrip is a registered trademark of Akzo Nobel NEW ZEALAND 686 Rosebank Road Avondale Auckland New Zealand TEL: 64.9.828.3009 or 0800.150.527 FAX: 64.9.828.1129 

ASIA 449 Tagore Industrial Avenue 01-03 Hong Joo Industrial Building Singapore 787820 TEL: 65.6453.1981 FAX: 65.6453.1778 

As Needed 

ALUMINUM & STEEL


For Professional Use Only 

Please contact our 

sales department 

for more information

750 


Simms 

gENERAL PURPOSE CAgE FRAMES 

Sturdy 1/4" galvanized steel shank. Two tension bends on five 

wire cage assembly to prevent refill creeping. Injection-moulded 

plastic handles. Threaded for use with extension poles. 

F-194 Premium grip 9.5" long, 1.5" dia. 

F-190 Regular grip 7.5" long, 1.5" dia. 

F-191 Regular grip 9.5"long, 1.5" dia. 

Simms 

ExtENDABLE HANDLE CAgE FRAME 

Sturdy lightweight aluminum handle which extends up to a length 

of 28" eliminating use of extension poles. 

F-185 

Simms 

SPECIALtY NYLON tRIM ROLLER 

Unique Simms comfort design, short style plastic handle. 

For use with strong solvent-based coatings. Use with 

epoxy, fiberglass resins, texture coatings, moisture cure 

urethane varnishes and adhesives. 

A-048 Roller (handle & refill) 

A-049 Refill, 1 pk 

Simms 

FOAM tRIM ROLLER 


Ideal for all semi-gloss and high gloss paints, enamels, 

varnishes, melamine, marine finishes, adhesives and 

fiberglass application. 



Simms 

POLYEStER FABRIC tRIM ROLLER 


Ideal for all flat paints on smooth and semi-smooth 

surfaces. Removable metal wing-nut and plastic end caps 

included with roller. Roller refill can be used with standard 

3" (75mm) cage frame. 



Simms 

MOCRYL ® tRIM ROLLER 

Mini-diameter core and short metal wire frame and handle. 



fiberglass application. 



Simms 

DELUxE tRIM ROLLER 

Shed-resistant "lint free" woven fabric for fine finishes. 

Ideal for all semi-gloss and high gloss paints on smooth 

surfaces. 


A-091 Refill, 6mm (1/4") pile 1 pk 

A-093 Refill, 10mm (3/8") pile 1 pk 

Simms 

gENERAL PURPOSE ROLLERS REFILLS 

Good quality, knitted polyester fabric. Moderately priced. Excellent 

coverage. 6mm pile for all flat, low sheen and semi-gloss latex paints or 

flat and low sheen oil paints. 10mm for flat and low sheen paints. 13mm 

to 31mm piles for all flat paints. Plastic core. 

R-150 Smooth surfaces 7.5"x1.5", 6mm(1/4") pile 

R-151 Smooth surfaces 9.5"x1.5", 6mm(1/4") pile 

R-120 Smooth & semi-smooth surfaces 7.5"x1.5", 10mm(3/8") pile 

R-121 Smooth & semi-smooth surfaces 9.5"x1.5", 10mm(3/8") pile 

R-175 Semi-Rough surfaces 9.5"x1.5", 13mm(1/2") pile 

R-177 Semi-Rough surfaces 9.5"x1.5", 19mm(3/4") pile 

R-179 Rough surfaces 9.5"x1.5", 31mm(1-1/4") pile 

Simms 

MOCRYL ® FABRIC ROLLER 

REFILLS 

Ideal for all semi-gloss and high gloss 

paints, enamels, varnishes, melamine, marine finishes, adhesives and 

fiberglass application. Phenolic core. Smooth surfaces. 9.5" x 1.5" 

6mm(1/4") pile. 

R-221 

Simms 

SPECIALtY NYLON ROLLER REFILLS 

100% nylon fabric. Fabric, adhesive and core bond together for use 

with strong solvent-based coatings. Use with epoxy, fiberglass resins, 

texture coatings, moisture cure urethane varnishes and adhesives. 

Heavy-duty phenolic core. 9.5" x 1.5" 5mm (3/16") pile. 

R-890 

Simms 

FOAM ROLLER REFILLS 

Ideal for applying oil based semi-gloss and 

high gloss paints, Melamine, urethanes, stain and varnishes. Not 

recomended for laquer or shellac. Plastic core. 9.5" x 1.5" 3mm (1/8") 

pile. 

R-196 

Simms 

tIME tRIMMERS MINI ROLLERS 

Single wire European style format. Chromed wire. Simms comfort 

design handle threaded for standard extension pole use. Use with 4" 

(100mm) or 6" (150mm) refills. 

F-102 Mini roller frame 

A-148 Gold stripe fabric roller refill 2 pk

Simms 

gENERAL PURPOSE PLAStIC tRAY 

Impact resistant recycled polypropylene. 

Solvent resistant. Small capacity design. 

t-150 Tray for 9.5" rollers 1 qt capacity 

t-155 Disposable liner 

Simms 

LADDER-MAtE ® PLAStIC tRAY 

Impact-resistant recycled polypropylene. 

Patented high wall, anti-skid grid and ladder 

leg lock design. For use on ladder or floor. 

t-160 Tray for 9.5" rollers 2 qt capacity 


Simms 

JUMBO PROFESSIONAL PLAStIC tRAY 

Impact resistant recycled polypropylene. 

Resistant to solvents. Patented deep-well 

design to hold more paint and prevent spills. 

Anti-skid grid controls the amount of paint on 

roller for even painting results. Designed to be 

used from the floor in conjunction with a roller 

and extension pole. Excellent for large surface 

painting jobs. 

t-2005 Tray for 9.5" rollers 4 quart capacity 


Simms 

CONSUMER MEtAL tRAY 

Small, easy to move steel tray. Ribbed bottom. 

Ladder-hook legs. Solvent resistant. 



Simms 

DEEP WELL MEtAL tRAY 

Heavy duty plated steel. Ribbed bottom. Ladderhooked 

legs. Medium level paint capacity. Solvent resistant. 



Simms 

tURN-LOCK, ALL FIBERgLASS POLE 

All fiberglass handle and sliding inner tube. Locks securely with a 

turn to whatever length you want. Exterior support collar for extra lock 

reinforcement. 1-1/4" diameter, 2-4' long. 

A-2045 

Simms 

PUSH BUttON-LOCK FIBERgLASS / 

ALUMINUM POLE 

Exterior fiberglass pole with pin-locking aluminum inner tube. Push 

button (thumb release) mechanism that locks positions in 6 inch 

increments. 1-1/4" diameter, 3-6' long. 

A-2056 


Simms 

BUCKEt gRID 

Expanded metal grid in steel frame. Bent legs. For 

loading paint on a roller directly from 20L (5gal) pail. 

A-020 

Simms 

ECONO gRADE ROLLER SEt 

Good quality set. For basic painting where a fine finish 

is not required. Contains a 1 quart plastic roller tray 

(T-150), 5-wire roller cage frame and one single-use 

polyester knitted fabric roller refill. Use with flat latex 

paints on smooth and semi-smooth surfaces. 9.5" x 

1.5" 3/8" (10mm) pile. 

S-950 

Simms 

gENERAL PURPOSE ROLLER SEt 

Contains 1 quart plastic roller tray (T-150), 5-wire roller 

cage frame and one general polyester knitted fabric 

roller refill. Excellent coverage. Use with all flat and low 

sheen paints on smooth and semi-smooth surfaces. 

9.5" x 1.5" 3/8" (10mm) pile. 

S-960 

Simms 

PROFESSIONAL ROLLER SEt 

"Lint Free" professional quality set. Contains 2 quart 

Ladder-Mate ® plastic roller tray (T-160), 5-wire roller 

cage frame and one shed-resistant woven fabric blend 

roller refill. Use with all paints. Ideal for flat, low sheen 

and semi-gloss paints on smooth and semi-smooth 

surfaces. 9.5" x 1.5" 3/8" (10mm) pile. 

S-421 

Simms 

gENERAL PURPOSE tRIM ROLLER SEt 

General purpose polyester fabric. Ideal for applying all 

flat paints. not recommended for semi-gloss or high 

gloss coatings. Includes tray, lid, frame & refill. 3" x 

1-1/2" / 3/8 (10mm) pile. 

S-342 

Simms 

PREMIER "LINt FREE" tRIM ROLLER 

SEt 

Best quality, shed-resistant woven fabric for fine finishes. 

Ideal for all semi-gloss and high gloss paints on smooth 

surfaces. Includes tray, lid, frame & refill. 3" x 1-1/2" / 

1/4" (6mm) pile. 

S-344 

Simms 

MOCRYL ® FABRIC tRIM ROLLER SEt 



fiberglass application. Includes tray, lid, frame & two 

refills. 3" x 7/8"" / 1/4" (6mm) pile. 

S-346

752 


Redtree 

DELUxE SEt 

Paint roller cover, caged frame and metal tray set. 

Individually poly wrapped. 9". 

tRAYSEt 

Redtree 

ECONO tRAYSEt 

Paint roller cover, frame and plastic tray set. 

Individually poly wrapped. 9". 

ECONOSEt 

Redtree 

MINI ROLLERS AND tRAY 

SEtS 

4" roller and tray set. Includes tray, 4" frame (1/4" 

shaft), 1 cloth roller, 1 foam roller. 

MINItRAYSEt 

FOAM-4 4" foam roller 2/pk 

MINIROLLER 4" cloth roller 2/pk 

MINIFRAME 16" long handle frame for 4" mini set refills 

MINISEt 16" long handle frame with 4" cloth roller 

Redtree 

PLAStIC tRAY 

Solvent resistant plastic. 

Extra deep to hold large 

quantities of coatings. 

tRAY4PL 4" 

tRAY9PL 9" 

Redtree 

MEtAL tRAY 

Metal paint tray. Chevron bottom for easy 

removal of excess paint from paint roller. 9". 

tRAY9 

Redtree 

FRAMES 

4" wire cage 

FRAME3 3" 

FRAME7 7" 

FRAME9 9" 

Redtree 

FOAM ROLLER 

Lint free roller cover. Designed for urethanes, varnishes and enamels. 

For very smooth finishes. Solvent resistant Phenolic core. Packed in 

individual poly bag that details specific job use. 

FOAM-7 7" x 1/8" 

FOAM-9 9" x 1/8" 

Redtree 

ENAMEL ROLLER COVER 

3/16" nap. Designed for enamels, varnishes and smooth finishes. 

Solvent resistant Phenolic core. Packed in individual poly bag that 

details specific job use. 

7R-11PH 7" x 3/16" 

9R-11PH 9" x 3/16" 

Redtree 

MULtI-PURPOSE ROLLER COVER 

1/4" nap. Designed for enamels, epoxies, resins, etc. Solvent resistant 

Phenolic core. Packed in individual poly bag that details specific job 

use. 

7R-14PH 7" x 1/4" 

9R-14PH 9" x 1/4" 

Redtree 

MEDIUM ROLLER COVER 

3/8" nap. Designed for fiberglass and bottom painting. Solvent 

resistant. Phenolic core. Packed in individual poly bag that details 

specific job use. 

3R-22PH 3" x 3/8" 

7R-22PH 7" x 3/8" 

9R-22PH 9" x 3/8" 

Redtree 

tRIM ROLLER 

Sturdy rod type construction. Combination 3" paint roller 

cover with handle. Threaded handle to accept extension 

pole. Designed for trim work. 

ROLLER3 

Simms 

FOAM BRUSH 

Disposable sponge-like brush for small varnish and touch-up jobs. 

FOAM1 1", 48 per box 




Redtree 

PARtS BRUSH 

Gas/parts brush. Extra hard synthetic bristle. Used for cleaning 

parts in solvents. Pointed trim round wood handle. 

PARt8

Redtree 

ONYx 

100% white Chinese bristle brush with beavertail handle. Suited 

for all topside applications. 

ONYx1 1" 

ONYx112 1-1/2" 

ONYx2 2" 

ONYx212 2-1/2" 

ONYx3 3" 

ONYx4 4" 

Redtree 

tHE BADgER 

Professional quality paint brush. All natural bristle, extra thick. Ideal for 

all bright work where superior finishes are required. Clear wood round 

handle. 

BADg1 1" 

BADg112 1-1/2" 

BADg2 2" 

BADg212 2-1/2" 

BADg3 3" 

Redtree 

CHIP BRIStLE BRUSH 

Inexpensive throw-away white bristle brush. Great for resins etc. 

Plain sanded wood handle. 

CHIP12 1/2" 36/box 

CHIP1 1" 36/box 

CHIP112 1-1/2" 36/box 


CHIP212 2-1/2" 12/box 



Redtree 

FOOLER 

Double the thickness of the average 

chip bristle brush. Designed for more 

paint pick-up, more release and less dripping. 

Economically priced. 

FOOLER1 1" 36/box 




Redtree 

CHINA Ox BRUSH 

Superior quality paint brush. Selected natural and ox bristle brush, set 

in hardwood handle. For fine finishes with minimum effort. 

CHINOx1 1" 

CHINOx112 1-1/2" 

CHINOx2 2" 

CHINOx212 2-1/2" 

CHINOx3 3" 

Redtree 

SASH 

Chinese bristle brush. Suited for enamels, varnishes, and marine 

finishes. 

SASH112 1-1/2" 

SASH2 2" 

Redtree 

MAINtENANCE BRUSH 

General purpose, 100% Chinese bristle brush. Good for enamels and 

bottom paints. Excellent value. 

Rt832-1 1" 

Rt832-112 1-1/2" 

Rt832-2 2" 

Rt832-212 2-1/2" 

Rt832-3 3" 

Rt832-4 4" 

Redtree 

RADIAtOR BRUSH 

Black pure Chinese bristle brush. For painting behind pipes and 

other hard to reach areas. Bent, plain sanded, extra long wood 

handle. 

RAD1 1" 

RAD112 1-1/2" 

RAD2 2" 

RAD3 3"

754 


Simms 

StREAMLINE 

Better quality pure bristle brushes. One of the most popular lines. 

Size thickness Length Shelf 

mm in mm in mm in Pack 

2300-30 30 1-1/4 13 1/2 51 2 20 

2300-50 50 2 16 5/8 58 2-1/4 20 

2300-75 75 3 19 3/4 64 2-1/2 10 

2300-100 100 4 19 3/4 70 2-3/4 10 

Simms 

BLACKBIRD 

Best quality pure bristle brushes. 



2400-30 30 1-1/4 13 1/2 58 2-1/4 20 

2400-50 50 2 16 5/8 70 2-3/4 20 

2400-75 75 3 19 3/4 77 3 10 

2400-100 100 4 19 3/4 83 3-1/4 10 

Simms 

REDBIRD 

A low priced line ideal for those “touch-up jobs” around the home. 



2100-15 15 5/8 7 1/4 45 1-3/4 20 

2100-30 30 1-1/4 10 3/8 45 1-3/4 20 

2100-50 50 2 10 3/8 45 1-3/4 20 

2100-75 75 3 13 1/2 45 1-3/4 10 

2100-100 100 4 13 1/2 45 1-3/4 10 

Simms 

tHRUSH 

Good quality, economically priced brushes for the “do-it-yourself” 

painter. 



2200-30 30 1-1/4 10 3/8 51 2 20 

2200-50 50 2 13 1/2 51 2 20 

2200-75 75 3 13 1/2 58 2-1/4 10 

2200-100 100 4 16 5/8 64 2-1/2 10 

Simms 

ONYx SASH 

Quality oval sash tool. 



2910-10 10 #2 13 1/2 40 1-5/8 20 

2910-15 15 #4 16 5/8 45 1-3/4 20 

2910-6 6 #6 19 3/4 51 2 10 

Simms 

OFFSEt RADIAtOR 

A brush designed to make painting easier in between radiators and 

other awkward places. 45° angle at the shoulder. 



2940-38 38 1-1/2 8 5/16 45 1-3/4" 10 

Simms 

SASH 

Economical polyester angular sash brush. 

9809-38 1-1/2" 

9809-50 2" 

Simms 

WALL 

Economical polyester paint brush. 

9810-25 1" 

9810-50 2" 

9810-75 3" 

Awlgrip 

tACK RAgS 

4-per package 

73009

3M 

ALUMINUM OxIDE 

SANDINg DISCS 281C 

Aluminum oxide discs are the standard of the metalworking 

industry and are the most popular discs used for general metal 

removal. Excellent for use on all metal grinding and finishing 

applications, rust and scale removal and deburring operations. 

Size grit Per Box 

85959 4-1/2" X 7/8" 24 25/ Box 

85960 4-1/2" X 7/8" 36 25/ Box 

85961 4-1/2" X 7/8" 50 25/ Box 

85962 4-1/2" X 7/8" 60 25/ Box 

85963 4-1/2" X 7/8" 80 25/ Box 

85964 4-1/2" X 7/8" 100 25/ Box 

85965 4-1/2" X 7/8" 120 25/ Box 

85966 5" X 7/8" 24 25/ Box 

85967 5" X 7/8" 36 25/ Box 

85968 5" X 7/8" 50 25/ Box 

85969 5" X 7/8" 60 25/ Box 

85970 5" X 7/8" 80 25/ Box 

85971 5" X 7/8" 100 25/ Box 

85972 5" X 7/8" 120 25/ Box 

85973 7" X 7/8" 24 25/ Box 

85975 7" X 7/8" 50 25/ Box 

85976 7" X 7/8" 60 25/ Box 

85977 7" X 7/8" 80 25/ Box 

85978 7" X 7/8" 100 25/ Box 

85979 7" X 7/8" 120 25/ Box 

3M 

gREEN CORP FIBRE DISCS 

An all-purpose grinding disc for any kind of metal or fiberglass grinding. 

These high-performance green grinding discs are long lasting and 

fast cutting for a whole new performance level in metal and fiberglass 

grinding. Excellent for boat propeller reconditioning. 

5" x 7/8" grade Discs/Box 

01913 50 20 

01914 36 20 

01915 

7" x 7/8" 

24 20 

01921 50 20 

01922 36 20 

01923 24 20 


3M 

740I/745I IMPERIAL StIKIt DISCS 

This uniquely blended mineral construction provides for a fast cutting, 

longer lasting abrasive. Excellent for stripping paint or sanding marine 

fairing compounds. Purple in colour, the 740I and 745I abrasive mineral 

is bonded to a tough "E" weight backing. 

6" diameter grade Discs/Roll 

00371 P80E 100 

00373 40E 50 

00374 36 50 

8" diameter 

00375 120 25 

00377 P80E 25 

00379 40E 25 

00380 36 25 

3M 

236U StIKIt gOLD "C" WEIgHt DISC 

ROLLS 

(Non-staining Fre-Cut). A strong "C" weight backing provides excellent 

support for a tough and durable aluminum oxide mineral. These discs 

are aggressive, sharp, fast cutting and long lasting. The non-staining 

Fre-Cut resists loading and the pressure-sensitive adhesive ensures 

excellent adhesion to 3M Stikit pads. Excellent for gelcoat, wood and 

plastic applications. 


86477 P500 100 

86476 P400 100 

01204 P360 100 

86475 P320 100 

01206 P280 100 

86474 P240 100 

86473 P220 100 

86472 P180 100 

86471 P150 100 

86470 P120 100 

86469 P100 100 

86468 P80 100 

3M 

216U StIKIt gOLD DISC ROLLS 

These discs are aggressive, sharp, fast cutting and long lasting. Their 

construction also resists dulling, loading and edge wear. The pressuresensitive 

adhesive coating ensures excellent adhesion to 3M Stikit disc 

pads without adhesive buildup. 


01485 P320 125 

01489 P180 125 

01491 P120 125

756 


3M 

246U/251U gREEN CORPS StIKIt 

PRODUCtION FRE- 

CUt DISCS 

Pressure-sensitive adhesive backed discs 

for easy application to and removal from 

disc pad. 

An all new mineral/bond construction and 

tough "E" weight backing provide for a 

fast cutting, long lasting abrasive disc. 

Excellent for coarse sanding of hull and deck areas. 

8" diameter Product ID grade Discs/box 

01549 246U 80D 50 

01550 251U 40E 50 

01552 246U 24E 20 

01556 246U 60E 50 

3M 

260L StIKIt FINISHINg FILM DISCS 

Designed for use in scuff sanding before painting, as well as to remove 

runs, dust nibs and excess orange peel from paint and gelcoat prior 

to compounding. These 3M Stikit discs are individually linered and 

constructed of a high-performance, aluminum oxide mineral bonded to 

a smooth film, with a pressure-sensitive adhesive backing. Cuts fast, 

lasts long, resists loading and leaves a consistent finish. 

6" diameter grade Discs/ Box 

01318 P1200 100 

01319 P1000 100 

01320 P800 100 

01321 P600 100 

3M 

StIKIt LOW PROFILE 

FINISHINg DISC PADS 

Soft foam construction for fine finish sanding and 

outstanding conformability to contours and curves. 

For use with 3M Stikit Discs. Use on random orbital sanders 

only. 6" (5/16-24 threaded shank). 10 pads per case. 

05546 

3M 

StIKIt SOFt DISC PAD 

Vinyl pad face provides good adhesion. Soft foam 

construction and tapered edge offer a high degree 

of conformability. Fits all standard (5/8" shaft) slow 

speed polishers. Maximum safe operating speed 3000 rpm. For 

use with 8" disc size. 

05568 

3M 

StIKIt DISC PAD 

Vinyl pad face provides good adhesion of Stikit 

discs. Edges are contoured to allow for sanding 

curves and close to mouldings. Fits all standard 

(5/8" shaft) slow speed polishers. Maximum safe operating speed 

3000 rpm. For use with 8" disc size. 

05579 

3M 

StIKIt DISC PADS 

The vinyl pad face provides good disc adhesion yet allows easy 

disc removal. Both pads are lightweight, shock resistant and well 

balanced. Maximum safe operating speed 7000 rpm. For use with 

6" disc size. 10 per case. 

05576 

3M 

StIKIt HAND PADS 

Designed to be used with all grades of 3M Stikit 

Discs. These hand pads are firm yet comformable 

and are lightweight, making sanding of such areas as corners and 

contours easier. 6" diameter. 10 per case. 

05586 

3M 

StIKIt DISC ROLL 

DISPENSERS 

These sturdy metal dispensers provide a 

convenient means of storage and single disc 

dispensing of 3M Stikit Disc Rolls. Dispensers 

can be wall or bench mounted and are also 

portable. Holds two 125 count disc rolls. 5" or 

6" diameter with 1" core. Products do not come with this dispenser. 

05450 

3M 

255P HOOKIt gOLD DISCS 

Premium paper backing, open coat with improved stearate system. 

Fast cut, long disc life minimizes disc loading leaving an exceptionally 

fine finish. 100 discs per box. 

6" diameter grade 

00201 P400 

00203 P320 

00204 P280 

00206 P220 

00208 P150 

00209 P120 

00210 P100 

00211 P80 

3M 

255U gREEN CORPS HOOKIt 

PRODUCtION FRE-CUt 

DISCS 

They attach as quickly as they cut and can be 

reattached and reused until their full life is realized. 

Designed for heavy bottom paint and gelcoat 

removal, as well as for rough shaping of marine 

fairing compounds. The 3M Hookit Soft Disc Pad was designed to 

conform to the curves and contours found on boat hulls and decks. 

8" diameter grade Discs/Box 

01652 24E 20

3M 

750U/751U gREEN CORPS HOOKIt 

REgALItE DISCS 

A uniquely blended mineral bonded to a tough "E" weight backing 

provides a fast cutting, long lasting abrasive. The 3M Hookit 

attachment system allows easy application to and removal from the disc 

pad. Excellent for stripping paint or sanding marine fairing compounds. 

Product ID 

6" diameter 

grade Discs/ Box 

00210 751U 100E 25 

00512 750U 80E 25 

00513 750U 60E 25 

00515 

8" diameter 

751U 40E 25 

00520 750U 100E 25 

00521 750U 80E 25 

00522 750U 60E 25 

00524 751U 40E 25 

3M 

HOOKIt SOFt DISC PAD 

Designed especially for use with 3M Hookit 

discs. The hook-and-loop face secures the 

disc to the backup pad, yet provides for easy 

removal and attachment. Soft foam construction and tapered edge 

offer a high degree of conformability to provide a uniform finish 

when sanding contours and curves. Fits all standard (5/8" shaft) 

slow-speed polishers. Maximum safe operating speed 3000 rpm. 

For use with 8" disc size. 

05768 

3M 

HOOKIt DISC PAD 

Specifically made to use with the 3M Hookit discs. The pad 

face securely holds the discs yet allows for easy change and 

reattachment of discs. The pad is lightweight, shock resistant and 

well-balanced. The tough durable plastic hub and a conformable 

foam body are designed for a maximum operating speed of 7000 

rpm. 6" diameter. 10 per case. 

05776 

3M 

HOOKIt DISC PAD 

Designed specifically for use with 3M Hookit Discs, the hook-andloop 

face secures the disc to the backup pad, yet provides for 

easy removal and reattachment. Edges are contoured to allow 

for sanding curves and close to mouldings. Fits all standard (5/8" 

shaft) slow-speed polishers with a maximum operating speed of 

3000 rpm. For use with 8" disc size. 

05779 

3M 

HUB AND REtAINER NUt 

To be used with 3M Fibre Disc Pads only and is 

interchangeable with both pad faces to save tool 

costs. Fits all standard (5/8" shaft) slow-speed 

grinders. 

05633 


3M 

PURPLE CLEAN SANDINg HOOKIt DISC 

6" disc with precise hole design for improved life and dust extraction. 

Use for shaping plastic filler, removing paint around damaged area and 

scratch refinement of bare metal. 

01810 500 grit 

01812 320 grit 

01815 220 grit 

01818 120 grit 

01820 80 grit 

3M 

260L HOOKIt FINISHINg FILM DISCS 

Designed for use in scuff sanding before painting, as well as to remove 

runs, dust nibs and excess orange peel from paint and gelcoat prior 

to compounding. These discs allow for machine sanding versus 

having to hand sand prior to compounding or multiple applications of 

very aggressive compounds. These discs are constructed of a highperformance, 

aluminum oxide mineral bonded to a smooth film backing. 

Cuts fast, lasts long, resists loading and leaves a consistent finish. 6" 

diameter. 

grade Discs/Box 

00950 P1500 100 

00968 P1200 100 

00969 P1000 100 

00970 P800 100 

00991 P600 100 

3M 

255P HOOKIt DUSt-FREE gOLD DISCS 

Premium paper backing, open coat with improved stearate system. 

Fast cut, long disc life minimizes disc loading leaving an exceptionally 

fine finish. 100 discs per box. 6" Diameter. 

grade 

00215 320 

00216 280 

00217 240 

00218 220 

00219 180 

00220 150 

00221 P120 

3M 

HOOKIt DUSt-FREE LOW 

PROFILE BACKUP PAD 

Specially designed for 3M Hookit Dust-Free 

Discs. The 3M Hookit pad face provides good disc adhesion yet allows 

easy disc removal. Made with a tough, durable plastic hub and durable 

foam body, pads are lightweight, shock resistant and well balanced. 

The low profile design works on all standard dual action type sanders 

and conversion kits designed for dust-free sanding. Maximum operating 

speed 10000 rpm. 6" diameter. 10 per case. 

05856 

3M 

PAINt BUStER DISC PADS 

Offer firm support for tough grinding yet are flexible 

enough to conform to surface contours. Pad 

construction is designed to resist chunking, reduce 

edge wear and prolong pad life. Maximum safe 

operating speed is 7000 rpm. Use with 7" dia. discs. 

05634

758 


3M 

216U StIKIt gOLD SHEEt ROLLS 

Coated aluminum oxide abrasive rolls bonded with resin and a 

pressure-sensitive adhesive backing for quick adhesion and easy 

removal . Use with the 3M Stikit Double Roll Dispenser to cut to 

desired length for use on file shoes and sanding blocks. 

2-3/4" x 45 yards grade 

02591 P320 

02593 P240 

02595 P180 

02596 P150 

2-3/4" x 30 yards 

02597 P120 

02598 P100 

2-3/4" x 25 yards 

02599 P80 

3M 

216U StIKIt gOLD SHEEt ROLLS 

Coated aluminum oxide abrasive rolls bonded with resin and 

backed with a pressure-sensitive adhesive for quick adhesion and 

easy removal. Cut to desired length for use on vibrator sanders, 

fairing boards and sanding blocks. 4-1/2" width. 

Length grade 

02691 25 yards P320 

02693 25 yards P220 

02694 25 yards P180 

02695 25 yards P150 

02697 20 yards P100 

02698 20 yards P80 

3M 

246U/251U gREEN CORPS StIKIt 

PRODUCtION RESIN 

BOND PAPER SHEEtS 

Sheets have pressure-sensitive adhesive 

backing for easy application to and removal 

from tool face. Special mineral coating plus 

improved mineral bond provides for fast cutting 

abrasive life. Individually linered. Grade 80D 

has 3M Fre-Cut coating. 2-3/4" x 16-1/2". 

Product grade Sheets/Box 

02230 246U 80D 100 

02231 251U 40E 100 

3M 

StIKIt HAND BLOCKS 

Made of a sturdy, durable, high-strength material and shaped to fit 

the hand comfortably. These blocks have an embossed 

rubber face which allows good adhesion for 3M Stikit 

Sheet rolls. 

05440 2-3/4" x 5" 

05441 2-3/4" x 7-3/4" 

3M 

StIKIt SOFt HAND BLOCK 

Made of a tough flexible foam which allows the user to block sand on 

flat surface or contours. 3M Stickit sheets adhere firmly to the vinyl face 

and won't slip or tear. 2-3/4" x 5". 

05442 

3M 

StIKIt HAND FILE BOARD 

A well-balanced, durable tool that is resistant 

to most solvents, has a sturdy design that 

provides a non-twisting, flat sanding surface. 

This file board has an embossed rubber face 

that allows adhesion release when used with 

3M 2-3/4" x 16-1/2" sheets. Cleaned with lacquer thinner. 2-3/4" x 

16-1/2" 

05444 

3M 

MARINE HOOKIt FAIRINg BOARDS 

Designed for fairing, shaping, sanding and finishing boats, plugs and 

molds. These boards feature a durable, lightweight construction that 

combines worker comfort with quick results. The rigid fairing board can 

be used for large flat areas such as freeboard and deck areas. The 

flexible fairing board is for concave and convex curved areas such as 

hulls. These boards utilize 4-1/2" x 30" 3M Hookit abrasive sheets. 

83497 Rigid, 4-1/2" x 30" 

83978 Flexible, 4-1/2" x 30" 

3M 

HOOKIt HAND BLOCKS 

Made of a sturdy, durable high-strength material to 

fit the hand comfortably. These blocks have 

an embossed 3M Hookit face for use with 3M 

Hookit Regalite sheets. The smaller block 

is designed to use one-third of a 3M Hookit 

Regalite sheet while the larger block uses one-half of a 3M Hookit 

Regalite sheet. 

05740M 2-3/4" x 5" 

05741 2-3/4" x 7-3/4" 

3M 

HOOKIt HAND FILE BLOCK 

A well balanced, durable shop tool that is resistant to most solvents. 

The sturdy design provides a nontwisting 

flat sanding surface. The 

embossed 3M Hookit face allows easy 

attachment and removal of our 3M 

Hookit Regalite file sheets. 2-3/4" x 

16-1/2". 

05744

3M 

255L HOOKIt gOLD FILM SHEEtS 

These sheets utilize the convenient hook-and-loop attachment system 

for easy placement on and removal from the tool face. Designed for dry 

sanding using a 3M Marine Hookit Fairing Board. 4-1/2" x 30". Sold by 

the sleeve. 

grade Sheets/Sleeve 

02630 P320 10 

02631 P220 10 

02632 P180 10 

02633 P150 10 

02634 P120 10 

3M 

750U/751U gREEN CORPS HOOKIt 

REgALItE SHEEtS 

These sheets utilize a convenient hook-and-loop attachment 

system for easy placement on and removal from the tool face. 

The special mineral coating bonded to a durable "E" weight 

backing is designed to last long and cut fast when using a 3M 

Marine Hookit Fairing Board. 4-1/2" x 30". Sold by the sleeve. 

Product ID grade Sheets/Sleeve 

02637 750U 100E 10 

02638 750U 80E 10 

02639 750U 60E 10 

02640 751U 40E 10 

02641 751U 36E 10 

3M 

750U/751U 

gREEN CORPS HOOKIt REgALItE 

SHEEtS 

These sheets utilize a convenient hook-and-loop attachment 

system for easy placement on and removal from the tool face. The 

special mineral coating bonded to a durable "E" weight backing 

is designed to last long and cut fast when using by hand or with a 

machine. 2-3/4" x 16-1/2". 

Product ID grade Sheets/ Box 

00538 750U 100E 50 

00539 750U 80E 50 

00540 750U 60E 50 

00542 751U 40E 50 

00543 751U 36E 50 

3M 

SOFtBACK SANDINg SPONgES 

These sanding sponges provide flexibility and conformability to allow for 

sanding by hand in areas inaccessible to machine sanders. Aluminum 

oxide mineral coated on a foam pad with a waterproof bonding system. 

4-1/2" x 5-1/2". Sold by the box, 20/ 

box. 

02601 Ultrafine/800-1000 

02602 Superfine/500-600 

02604 Fine/320-400 

02606 Medium/120-180 


3M 

WEtORDRY RUBBER SQUEEgEES 

Made of flexible rubber in two sizes. The 

3" x 2" size is used for removing swarf 

created when sanding with water while the 

2-3/4" x 4-1/4" size is used for applying 

glazing putty and plastic filler. 

05517 2-3/4" x 4-1/4" 

05518 3" x 2" 

3M 

SANDINg BLOCK 

A pliable rubber block which holds the sandpaper 

securely during wet or dry sanding operations. It 

utilizes a 9" x 11" sheet torn or folded into fourths. 

05519 Sheet size- 2-3/4 x 9 (1/4 sheet) 

05520 Sheet size- 3 x 11 (1/3 sheet) 

3M 

FLExIBLE SANDINg SPONgE 

A urethane foam sponge for sanding contoured 

and hard-to-reach surfaces. Has tough aluminum 

oxide abrasive on all four sides. Reusable. Rinse 

clean, squeeze and use again. One sponge per 

pack. Sponges are 3-3/4" x 2-5/8"x 1". 

50037 Fine/Medium 

50038 Medium/Coarse 

3M 

DRY gUIDE COAt 

Dry powder with applicator used to highlight surface imperfections and 

sand scratches prior to finishing with abrasives. Can be used on marine 

fillers, primers, paints and gelcoat. Contains no solvents. Kit comes with 

applicator pad. 

05860tM 50 gram cartridge 

05861 50 gram cartridge and applicator kit 

Starbrite 

MAgIC SCRUB 

• Made of stainless steel 

• Excellent for cleaning stains and mildew 

from teak 

• Use instead of Bronze Wool in all heavy 

cleaning applications 

• Will not rust, splinter, corrode or wear out 

• 100’s of uses in marine maintenance 

S88450

760 


3M 

213Q IMPERIAL WEtORDRY PAPER 

SHEEtS 

Utilizes a premium, aluminum oxide mineral, an improved paper 

backing, and an optimized construction that results in the following 

performance advantages: improved rate of cut, increased abrasive life, 

increased flexibility and a uniform, consistent finish. 9" x 11". 


02035 P800 50 

02036 P600 50 

02037 P500 50 

02038 P400 50 

02039 P360 50 

02040 P320 50 

02041 P280 50 

02042 P240 50 

02043 P220 50 

3M 

431Q WEtORDRY tRI-M-ItE PAPER 

SHEEtS 

Use wet or dry for sanding old finishes, fine feather edging surface 

work. It is a silicon carbide, closed coat product, bonded with a 

waterproof resin. 9" x 11" C weight. 

grade Sheets/ Sleeve 

02014 180C 50 

02015 150C 50 

02016 120C 50 

02017 100C 50 

02018 80C 50 

02019 60C 50 

3M 

216U PRODUCtION RESINItE 

FRE-CUt gOLD PAPER SHEEtS 

These sheets utilize a premium, aluminum oxide mineral, and improved 

paper backing that results in improved rate of cut, increased flexibility, 

increased abrasive life and a uniform finish. 9" x 11". 


02536 P800 50 

02537 P600 50 

02538 P500 50 

02539 P400 50 

02540 P360 50 

02541 P320 50 

02542 P280 50 

02543 P240 50 

02544 P220 50 

02545 P180 50 

02546 P150 50 

02547 P120 50 

02548 P100 50 

02549 P80 50 

3M 

001K CRYStAL BAY EMERY AND 

CROCUS CLOtH SHEEtS 

Emery Cloth for light metal sanding. Primarily a polishing 

agent but also used for removing rust and corrosion from metal 

surfaces. 

9" x 11". 50 sheets per sleeve. Medium grade. 

02432 

3M 

401Q IMPERIAL WEtORDRY 

PAPER SHEEtS 

This improved Imperial Wetordry product is 

constructed of a premium aluminum oxide mineral, 

a better bonding system and a more flexible backing. These features 

will provide faster cut, longer life and a more consistent finish, which will 

reduce sanding and buffing time. All grades are packed 5 sleeves per 

case. 5-1/2" x 9". 


02044 Micro fine 2000 50 

02023 Micro fine 1500 50 

02022 Micro fine 1200 50 

02021 Ultra fine 1000 50 

02045 Ultra fine 2500 50 

3M 

PRODUCtION PAPER SHEEtS 

Dry sanding only by machine or hand on fibreglass, wood or metal. 

Open coat with tough aluminum oxide mineral. 


02103 220A 100 

02104 180A 100 

02106 120C 100 

02108 80D 50 

02116 60D 50 

02117 40D 25 

02118 36D 25

3M 

241D UtILItY BELtS 

Used in grinding and finishing a wide variety of materials such as 

plastics, fiberglass, soft woods and non-ferrous metals. This product 

is a sharp, durably constructed belt with greater heat and moisture 

resistance than glue types. The combination of a drills cloth and the 

resin-over-resin bond provides greater firmness, body and longer life. 

3" x 21" x grit 3" x 24" x grit 4" x 24" x grit 

3x21x36 

3x21x40 

4x24x36 

3x21x50 3x24x50 4x24x50 

3x21x60 3x24x60 4x24x60 

3x21x80 3x24x80 4x24x80 

3x21x100 3x24x100 4x24x100 

3x21x120 3x24x120 4x24x120 

3M 

SCOtCH-BRItE MOULDINg 

ADHESIVE AND StRIPE 

REMOVAL DISC 

A vinyl, non-abrasive material designed to remove 

vinyl stripes, numbers, letters and graphics from 

gelcoat and painted marine surfaces without 

damaging the finish. 

07501 4" x 3/8" 

07517 8" x 5" 

3M 

SCOtCH-BRItE ROLOC SURFACE 

CONDItIONINg DISCS 

Scotch-Brite Roloc Surface Conditioning Discs combine with the quick 

"1/2 turn on, 1/2 turn off" 3M Roloc disc fastening system. The 3M 

Roloc disc fastening system offers ease of disc centering and is used 

in conjunction with 3M Roloc Disc Pad Assemblies. The Coarse grade 

(brown) equates with a coated abrasive grit of 

80 to 100, Medium (maroon) 100 to 120 grit. 

25 per box. 

07480 2" Coarse 

07481 2" Medium 

3M 

SCOtCH-BRItE CLEAN 'N StRIP 

ROLOC+ DISCS 

Constructed of a three-dimensional, durable web. 

These discs are the perfect alternative to wire 

brushes for removing paint, rust, cleaning welds, 

drip rail mouldings and light grinding/sanding in 

hard-to-reach areas. The 3M Roloc+ Holder allows 

for easy changeover of discs. 4" x 1/2", 

07466 

3M 

ROLOC+ HOLDER 

A durable plastic holder for use with Scotch-Brite 

Moulding Adhesive and Stripe Removal Disc and rivet 

cleaning disc. 1/4" steel shank allows easy use with 

portable tools. 1" dia. x 1/4" shank. 

07500 


3M 

ROLOC BRIStLE DISCS 

A moulded abrasive bristle product designed to 

conform to the workpiece in numerous surface 

conditioning applications. Much safer to use than conventional 

wire brushes, the discs use the quick "1/2 turn on, 1/2 turn off" 

Roloc fastening system for maximum convenience. In addition, 

the 3M Roloc Bristle Disc works well in applications where loading 

is a problem, replacing wire brushes, surface conditioning discs, 

and coated abrasive discs. The bristle design and 3-dimensional 

abrasive enable the bristle disc to remove coatings, sealant and 

adhesives quickly, leaving a clean surface ready for subsequent 

operations. The high maximum operating speed (MOS) of the 

bristle disc makes it compatible with right angle die grinders. Use 

in conjunction with the 3M Roloc Disc Pad Assembly. 2" MOS = 

25000 rpm. 10 discs per box. 

Size grade Colour 

18732 2" 80 Yellow 

18733 2" 120 White 

3M 

SCOtCH-BRItE SURFACE 

CONDItIONINg DISC PAD 

This disc pad connects quickly to any power tool 

while holding Scotch-Brite Surface Conditioning 

Discs securely and safely through the use of 3M 

Scotchmate Dual-Lock Fastening System. 

07492 For 4" discs 

07494 For 2" discs 

3M 

ROLOC DISC PAD ASSEMBLY 

A hard rubber back-up pad for use with 3M Roloc 

Discs. Pad assemblies come complete with a 2" x 

1/4" steel shaft. 

05539 For use with 2" diameter disc 

05540 For use with 3" diameter disc 

3M 

SCOtCH-BRItE SURFACE 

CONDItIONINg DISCS 

The unique open web construction of 

these discs delivers a uniform, consistent 

finish because it resists the loading and 

heat buildup that normally affects disc 

performance; they also work fast and 

reduce labour and material cost. These 

discs are designed to be used with the Scotch-Brite Disc Holder and 

attach safely and securely through the use of the 3M Scotchmate 

Dual Lock Fastening System. Used in cleaning and surface 

upgrading of boat propellers, as well as gasket removal. The coarse 

grade (brown) equates with a coated abrasive grit of 80 to 100, 

medium (maroon) 100 to 120 grit. 

Size grade Discs/Box 

07450 4" x NH Coarse 10 

07451 4" x NH Medium 10 

07453 2" x NH Coarse 25 

07457 2" x NH Medium 25

762 


APPLICAtIONS OF 3M PREFERRED MARINE MASKINg tAPES 

Scotch Scotch Scotch 

Application Masking tapes Paint Striping tapes Weather Resistant tapes 

3M 

SCOtCH 233+ PAINt MASKINg tAPE 

High performance masking tape designed to be highly conformable 

and has a specially formulated adhesive system which offers improved 

adhesive transfer resistance on rubber mouldings and painted surfaces. 

Provides outstanding paint lines and a controlled, consistent unwind. 

Green. 

26334 18 mm x 55m / 3/4" 

26336 24 mm x 55m / 1" 

26338 36 mm x 55m / 1-1/2" 

26340 48 mm x 55m / 2" 

26344 6 mm x 55m / 1/4" 

3M 

HIgHLAND 203 MASKINg tAPE 

A general purpose masking tape. 

Not for extended outdoor use. 

203-18 12mm x 55m / 3/4" 

203-24 24 mm x 55m / 1" 

203-36 36 mm x 55m / 1-1/2" 

203-48 48 mm x 55m / 2" 

203 233+ 218 256 471 225 2090 4811 

Critical Paint 

Masking (above waterline hull and top side/deck painting) • • • • • •** 

Bottom Painting • • • • • • • 

Paint Striping/ 

Colour Separation (boot,cove, shear or waterline stripe painting) • • • 

Brightwork 

Finishing and Coating (varnish,stain and sealing) • • • • • •** • 

Outdoor Masking (bundling and protecting over 24 hours) • • • • • 

Up to Up to Up to Up to Up to 

5 days 1 mo. 1 mo. 14 days 2 years 

** Not recommended for use with lacquered surfaces 

3M 

SCOtCH PLAStIC tAPE - NO. 471 

A blue vinyl plastic tape that is highly conformable and is excellent 

for masking off areas for detailed boat and boot stripe painting. Also 

excellent for masking over rivets on aluminum boats. 

06405 1/4" x 36 yards 

06408 1/2" x 36 yards 

06409 3/4" x 36 yards 

3M 

SCOtCH SILVER WEAtHER RESIStANt 

MASKINg tAPE - NO. 225 

The silver coloured coating on the backing of this 

crepe paper tape reflects UV light to provide weather 

resistance for up to a month's time. Prevents slivering 

and adhesive transfer during unmasking. 

02828 3/4" x 60 yards 

02829 1" x 60 yards 

3M 

SCOtCH LONg-MASK MASKINg tAPE - NO. 2090 

Utilizes a synthetic adhesive system which provides UV stability and adhesive transfer resistance up to seven days after application. Controlled 

crepe paper backing makes tape conformable and smooth for use in various paint, varnish masking applications. Bright blue colour makes this tape 

easily identifiable. 

2090-18 18 mm x 55m (3/4" x 60 yards) 

2090-24 24 mm x 55m (1" x 60 yards) 

2090-36 36 mm x 55m (1-1/2" x 60 yards) 

2090-48 48 mm x 55m (2" x 60 yards)

3M 

SCOtCH FINE LINE tAPE - NO. 218 

This specially extruded matte finish green polypropylene tape 

provides the finest colour line separation available because of its 

thinness. Stretches easily for smooth curves, yet tears easily by 

hand. Excellent solvent and moisture resistance. Allows taping 

over freshly cured lacquer, enamel and urethane paint systems 

sooner with less chance of imprint damage. Not for extended 

outdoor use. 

06300 1/8" x 60 yards 

06301 1/4" x 60 yards 

06303 1/2" x 60 yards 

06305 3/4" x 60 yards 

06307 3/16" x 60 yards 

04700 1" x 60 yards 

04701 2" x 60 yards 

3M 

tARtAN CLOtH 

DUCt tAPE 

Designed for general purpose use in bundling, sealing and holding 

applications. Silver. 2" x 60 yards. 

3939-2 

3M 

PROtECtIVE RAILINg tAPE 

Provides a clear protective covering for stainless steel, aluminum, 

brass and other metal rails. 

• The cross-web perferations allow for ease of removal 

• Cohesive coating adheres only to itself and does not transfer 

• Film remains securely in place during manufacturing, storage 

and transportation 

• Clear construction allows for visual inspection of rails 

• Film removes easily by simply tearing the perforations along 

the edge of the cohesive coating 

55458 6" x 150' 

55459 8" x 150' 

3M 

PAINt PROtECtION FILM 

6 mil clear coated urethane film that helps 

preserve the boat's finish 

84904tM 4" x 84" 

84906tM 6" x 84" 

3M 

PROtECtIVE tAPE 

A 6 mil medium-high tack protective tape 

with anti-slip properties. Applications include 

protecting aggregate and diamond pattern 

non-skid, gelcoat, paint, wood and counter top 

surfaces during boat or RV assembly and repair 

processes. For indoor use only. 

74779 12" x 100 yards 

74780 18" x 100 yards 

30379 24" x 100 yards 


3M 

OUtDOOR PROtECtIVE tAPE 

Suggested uses: Gelcoat, brightwork, metal, windows and hatches. UV 

resistant: can be left outdoors for up to 6 months. 

49453 6" x 150' 

49454 12" x 150' 

49455 24" x 150' 

3M 

PROtECtIVE CARPEt tAPE 

Suggested uses: carpet and fabric. Clear. 

For indoor use only. 

2E95-21x150 21" x 150' 

2E93-21x200 21" x 200' 

2E95-24x150 24" x 150' 

3M 

M3000 HAND MASKER 

The 3M Hand-Masker M3000 Dispenser 

applies masking tape to masking film up to 

144 in or paper up to 18 in in one continuous 

application. Tape & film sold separately. 

No blade. 

43001 

3M HAND-MASKER PRE-FOLDED 

MASKINg FILM ROLLS 

High-density, non-porous film specially designed for paint masking & 

overspray protection. The 9"x100' roll folds down to 72"W, 12"x100' roll 

folds down to 99"W to offer paint overspray protection for larger surface 

areas on deck or hull. 

06844 24" x 180' 

06848 48" x 180' 

06852 72" x 100' 

06853 99" x 100' 

06802 12" Masking Film Cut-off Blade 

3M READY-MASK PRE-tAPED MASKINg 

FILM WItH 3M LONg-MASK MASKINg 

tAPE - NO. 2090 

Convenient, pre-taped plastic film which unfolds to cover 

& protect various surfaces while painting. Specially 

treated film clings to surfaces & is easy to clean up. Pretaped 

with 3M Long-Mask Masking Tape #2090, which is 

sunlight stable, and gives the user 7-day clean removal. 

24" x 30 yards. 

07997 

3M 

MARINE HEAVY DUtY 

PROtECtION tAPE - 

NO. 346 

Abrasion resistant; its 17 mil thickness gives outstanding protection 

against scuffing and tearing. Offers protection to topside surfaces 

and cabin soles of boats under construction or repair/restoration. 

Its adhesive transfer resistance makes it ideal for use wherever 

protection from wear or damage is needed; as a temporary carpet 

for new boat display, to protect plastic portlights & windshields from 

scratches during installation, prevents damage to painted, varnished, 

gelcoated surfaces, wooden or fiberglass decks. 

05419 18" x 60 yards 

05420 24" x 60 yards

764 


3M 

PARtICULAtE RESPIRAtORS 

42 CFR 84 product codes 

3 levels of filtration efficiency: 

95 = 95% 99 = 99% 100 = 99.97% 

3 categories of resistance to oil: 

N = Not resistant R = Resistant P = Oil proof 

3M 

6000 SERIES LOW-MAINtENANCE 

RESPIRAtORS - HALF MASK 

A NIOSH/MSHA approved half-mask 

respirator that is adaptable to a wide 

range of respiratory protection. Its 

low maintenance, comfortable design 

allows greater worker flexibility. Five 

different type cartridges and two types 

of filters available for a variety of work 

environments. Cartridges are simply 

twisted on or off of the facepiece for 

easy replacement which allows the 

facepiece to be used over and over. 

The facepiece is easy to clean and is supplied with a storage bag. 

Read all product instructions and warnings prior to use. 

6200 Medium respirator facepiece 

6300 Large respirator facepiece 

3M 

6000 SERIES LOW-MAINtENANCE 

RESPIRAtORS - FULL FACEPIECE 

This respirator is a lightweight balanced 

respirator. It has a soft, lightweight 

facepiece material, three facepiece sizes 

and easy-to-adjust headstraps allow 

maximum comfort. Requires only limited 

maintenance time. Just clean as directed 

between uses. No retainers or extra parts 

are required to attach filters, cartridges or 

dual airline. NIOSH approved. 

6700 Small 

6800 Medium 

6900tM Large 

3M 

7500 SERIES HALF-MASK RESPIRAtORS 

New state-of-the-art features provide unsurpassed comfort. A soft 

seal design with advanced silicone material provides a softer feel on 

the face, while a unique head harness design adjusts easily so the 

user has the option of wearing the 

respirator in either traditional or drop 

down mode. The 3MCool Flow 

Exhalation Valve makes breathing 

easier, and helps reduce heat and 

moisture build up in the facepiece. 

Uses 6000 series cartridges and 2000 

series filters and is available in two 

sizes. 

7502 Medium 

7503 Large 

3M 

PARtS & ACCESSORY 

FOR 6000 SERIES RESPIRAtORS 

Sold by the box. 

501tM Filter retainer, 20 per box 

504tM Respirator cleaning wipes, 100 per box 

6885 Lens, tear off clear 25/pk 

6893 Inhilation valve 

6894 Nose cup assembly 

6895 Inhalation gasket 

6897 Head harness assembly 

6898 Lens assembly 

7899-25 Lens cover (7000 series) 

3M 

8210 N95 PARtICULAtE RESPIRAtOR 

3M recommended for sanding, grinding and buffing. 

Meets NIOSH 42 CFR 84 N95 requirements. Minimum 95% filter 

efficiency when subjected to a 0.3mm MMAD sodium chloride particle 

challenge. Filter performance will be greater against larger or smaller 

sized non-oil based particles. Excellent worker protection. Because 

they are comfortable to wear and easy to use, workers are quick to 

accept and use maintenance-free respirators. 

Lightweight construction. 

• Promotes greater worker comfort 

• Contributes to increased wear time 

• Adjustable nose clip. 

• Provides a custom fit and more secure seal 

• Reduces the potential for eyewear fogging 

• Provides economic protection 

• No spare parts to clean and maintain 

• Promotes easier communication 

20 per box 

8210tM 

3M 

8511 N95 PARtICULAtE RESPIRAtOR 

3M recommended for sanding, grinding and 

buffing. This respirator is NIOSH certified to have 

at least 95% filter efficiency at removing solid and 

liquid particles (excluding those containing oil). The 

innovative "M" nose clip helps provide a good seal 

against the face. The 3M Cool Flow Exhalation 

Valve reduces heat and humidity build up inside 

the respirator. Wearers will appreciate the added 

comfort and durability found in this respirator. 10 per box. 

8511tM

3M 

8000 CUPPED RESPIRAtOR 

Economical respirator designed for light duty 

applications. For protection against dust and mists. 

• Protection against fine particulates 

• Incorporates basic levels of comfort 

• Cup-shaped shell for off-face design and 

collapse resistance 

• Aluminum nose clip and a twin head strap attached at a single staple 

point to help gain a face seal and to allow ease of fit 

8000tM 

3M 

9211 N95 tHREE PANEL 

PARtICULAtE RESPIRAtOR 

3M recommended for sanding, grinding and buffing. A low profile, 

three panel respirator that conforms to a wide range of face sizes. 

Cool Flow Valve reduces breathing resistance with high comfort/feel 

on face. Folded and individually packaged. 10 per box. 

9211tM 

3M 

5N11 N95 

PARtICULAtE PRE-FILtER 

This pre-filter offers cake-resistant filter media 

for easy breathing and lint-resistant coating to 

help ensure exacting results during painting 

operations. Requires N (non-oil) filters. Can be 

used with 3M 5000 and 6000 Series Respirators. 

Sold by the pack, 10 per pack. 

5N11 

3M 

5P71 P95 

PARtICULAtE PRE-FILtER 

This pre-filter offers reliable protection against 

organic vapours and both oil and non-oil 

particles. These pre-filters help simplify prefilter 

selection, inventory and worker training. 

Prefilters many chemicals and pesticides 

including oil aerosols and requires R (oil 

resistant) or P (oil proof) filters. Can be used 

with 3M 5000 or 6000 Series Respirators/ 

Cartridges. Sold by the pack, 10 per pack. 

5P71 

3M 

2071 P95 

PARtICULAtE FILtER 

Lightweight and easy to use, these filters are 

designed for applications such as grinding, 

sanding and welding. It provides approved 

protection in environments where oil aerosols 

may be present. 

2071 2/pk 


3M 

6000 SERIES 

MULtI-gAS AND 

VAPOUR CARtRIDgES 

These cartridges can be used with the 

3M 6000 Series Half Face and Full 

Face Respirators. NIOSH approved 

against certain organic vapours. Sold 

by the pack, 2 per pack. 

6001M 

3M 

2097 P100 


This filter has been certified as being 99.97% 

efficient at removing solid and liquid particles 

including those containing oil. Used largely 

for welding, this filter is 3M recommended 

for ozone protection up to 10X the LTV and 

welding odour relief (organic vapours below 

the OSHA PEL). Designed for use only with 

the 3M 6000 and 7000 Series Half and Full 

Facepieces. Sold by the pack, 2 per pack. 

2097 

3M 

2091 P100 


Designed to meet the toughest of the new NIOSH 42 

CFR 84 filtration classifications, P100. With comfort, 

simplicity and economy, 3M's new advanced 

electrostatic filter media (AEM) makes this possible. 

Currently, it is the only filter not made from fiberglass 

components to achieve a P100 rating. Such filters 

are believed to be suitable for all applications that 

in the past required the use of dust/mist, dust/fume/ 

mist class of HEPA-rated respiratory protection. 

The 2091 is a lightweight, versatile, simple to use, 

compatible, exceptionally efficient respiratory filter 

and priced competitively. Sold by the pack, 2 per 

pack. 

2091tM 

3M 

EARPLUgS 

Protect ears from loud & constant noises generated by grinding, 

sanding, buffing and engine work. Comfortable & effective noise 

reduction (Noise Reduction Rating (NRR) is 29dB) with the convenience 

of disposability. Sold by the box. 

1100t Box (200 pairs) 

3M 

E-A-Rsoft 

UNCORDED EARPLUgS 

The world's softest earplugs and the highest NRR 

available in the industry. 

• Regular size fits most ear canals. 

• Shaped, self-adjusting foam provides a comfortable, 

low-pressure seal. 

• Non-irritating, dermatologically safe foam. 

• Soft foam plugs are easy to roll down and insert, then expand 

within the ear canal for maximum comfort. 

312-1250tM Box (200 pairs)

766 


3M 

PEtROLEUM SORBENtS 

For use in "Hydrophobic" (oil only) sorbent applications. Helps 

contain and control potentially dangerous spills of oil and gasoline 

... but repel water! 3M sorbents go to work immediately so there's 

less exposure to you and others and less risk to the environment. 

28911 17" x 19" x 1/4" (.38 gallons/pad) 

100 pads/bale (HP156 series) 

t151 17" x 19" x 3/16" (.22 gallons/pad) 

200 pads/bale 

HP255 17" x 19" x 1/2" (.66 gallons/pad) 

50 pads/bale 

3M 

31-gALLON PEtROLEUM SPILL KIt 

This spill kit combines the best of both worlds, petroleum sorbentfolded 

(which can be used as booms, pillows or roll) and high 

capacity petroleum sorbent pads. This unique combination allows 

you to easily select the product to fit the situation. Packaged in a 

white 20-gallon drum, the kit can be placed in key locations where 

fuels or other petroleum-based fluids may be released. The drum 

is also water, chemical and UV resistant - perfect for outside 

storage. And for fast transport to a spill site, we've included 

handy, easy-to-grip handles around the drum. 

Kit contains: Petroleum sorbent - folded 2 rolls, 5" x 50' folded 

(19" x 50' fully opened) petroleum sorbent pads, 30 each 17" x 

19", 3 temporary disposal bags and ties, one 20 gallon white drum 

with lid and plastic closure ring. 

PSKFL31 

3M 

MARINE OIL AND FUEL 

ABSORBENt BILgE PILLOW 

Holds up to two quarts of oil. Just toss the pillow in the bilge, and 

it soaks up oil and gasoline, but repels water! The bilge water can 

then be pumped overboard legally. The pillow includes a special 

grommeted hole which can be used to tie the pillow in place. 

Capacity 

29026 7" x 15" pillow (.5 gallons/pillow) 

PFL550DD 5" x 50' box folded (10.5 gallons/box) 

Rule 

BILgE PILLOW 

Disposable bilge oil absorber. 

Enviromental responsibility is a key factor in boating today and the Rule 

bilge oil absorber uses proprietary technology to absorb, encapsulate, 

and biodegrade used engine oil and diesel fuel reducing the possibility 

of accidental overboard discharge. The outer material repels water, 

ensuring the absorption effect is maintained for the entire season 

• Each super absorbent pad holds up to 2-1/2 quarts 

• Biodegrades used motor oil and diesel fuel 

• Legally disposable in household trash 

• 15" x 4.5" dia 

340 

Starbrite 

OIL ABSORBENt MAxI BOOM 

• Absorbs oil in the bilge so that remaining water may 

legally be pumped overboard 

• Convenient tie-downs keep boom in place 

• Special design allows maximum absorption 

• Helps protect the environment 

S86805 4" x 15" boom 

S86818 6" x 2' boom 

Starbrite 

OIL ABSORBENt ENgINE PAD 

• Absorbs oil, transmission fluid and fuel from 

engine pan so it can’t get into the bilge 

• Holds up to 3 quarts of oil 

• Can be wrung out and reused 

• Can be removed easily without dirtying hands 

• Helps protect the environment 

18" x 18" pad 

S86904 

PREMIUM DISPOSABLE NAtURAL LAtEx 

RUBBER gLOVES 

Sold by the box. 50 pairs per box. 

gLVLAt50M Medium 

gLVLAt50L Large 

gLVLAt50xL Extra large 

DISPOSABLE NItRILE gLOVES 

Sold by the box. 50 pairs per box. 

gLVNIt50M Medium 

gLVNIt50L Large 

gLVNIt50xL Extra large 

HEAVY DUtY RUBBER gLOVES 

A tough general purpose industrial glove. 

Black. Sold by the pair. 

459M Medium 

459L Large 

459xL Extra large

Zinc, Paint & Accessories - Paynes Marine Group

Create successful ePaper yourself

Delete template?

Save as template?