Zinc, Paint & Accessories - Paynes Marine Group

758
Zinc, Paint & Accessories
3M
216U StIKIt gOLD SHEEt ROLLS
Coated aluminum oxide abrasive rolls bonded with resin and a
pressure-sensitive adhesive backing for quick adhesion and easy
removal . Use with the 3M Stikit Double Roll Dispenser to cut to
desired length for use on file shoes and sanding blocks.
2-3/4" x 45 yards grade
02591 P320
02593 P240
02595 P180
02596 P150
2-3/4" x 30 yards
02597 P120
02598 P100
2-3/4" x 25 yards
02599 P80
3M
216U StIKIt gOLD SHEEt ROLLS
Coated aluminum oxide abrasive rolls bonded with resin and
backed with a pressure-sensitive adhesive for quick adhesion and
easy removal. Cut to desired length for use on vibrator sanders,
fairing boards and sanding blocks. 4-1/2" width.
Length grade
02691 25 yards P320
02693 25 yards P220
02694 25 yards P180
02695 25 yards P150
02697 20 yards P100
02698 20 yards P80
3M
246U/251U gREEN CORPS StIKIt
PRODUCtION RESIN
BOND PAPER SHEEtS
Sheets have pressure-sensitive adhesive
backing for easy application to and removal
from tool face. Special mineral coating plus
improved mineral bond provides for fast cutting
abrasive life. Individually linered. Grade 80D
has 3M Fre-Cut coating. 2-3/4" x 16-1/2".
Product grade Sheets/Box
02230 246U 80D 100
02231 251U 40E 100
3M
StIKIt HAND BLOCKS
Made of a sturdy, durable, high-strength material and shaped to fit
the hand comfortably. These blocks have an embossed
rubber face which allows good adhesion for 3M Stikit
Sheet rolls.
05440 2-3/4" x 5"
05441 2-3/4" x 7-3/4"
3M
StIKIt SOFt HAND BLOCK
Made of a tough flexible foam which allows the user to block sand on
flat surface or contours. 3M Stickit sheets adhere firmly to the vinyl face
and won't slip or tear. 2-3/4" x 5".
05442
3M
StIKIt HAND FILE BOARD
A well-balanced, durable tool that is resistant
to most solvents, has a sturdy design that
provides a non-twisting, flat sanding surface.
This file board has an embossed rubber face
that allows adhesion release when used with
3M 2-3/4" x 16-1/2" sheets. Cleaned with lacquer thinner. 2-3/4" x
16-1/2"
05444
3M
MARINE HOOKIt FAIRINg BOARDS
Designed for fairing, shaping, sanding and finishing boats, plugs and
molds. These boards feature a durable, lightweight construction that
combines worker comfort with quick results. The rigid fairing board can
be used for large flat areas such as freeboard and deck areas. The
flexible fairing board is for concave and convex curved areas such as
hulls. These boards utilize 4-1/2" x 30" 3M Hookit abrasive sheets.
83497 Rigid, 4-1/2" x 30"
83978 Flexible, 4-1/2" x 30"
3M
HOOKIt HAND BLOCKS
Made of a sturdy, durable high-strength material to
fit the hand comfortably. These blocks have
an embossed 3M Hookit face for use with 3M
Hookit Regalite sheets. The smaller block
is designed to use one-third of a 3M Hookit
Regalite sheet while the larger block uses one-half of a 3M Hookit
Regalite sheet.
05740M 2-3/4" x 5"
05741 2-3/4" x 7-3/4"
3M
HOOKIt HAND FILE BLOCK
A well balanced, durable shop tool that is resistant to most solvents.
The sturdy design provides a nontwisting
flat sanding surface. The
embossed 3M Hookit face allows easy
attachment and removal of our 3M
Hookit Regalite file sheets. 2-3/4" x
16-1/2".
05744