Zinc, Paint & Accessories - Paynes Marine Group

756
Zinc, Paint & Accessories
3M
246U/251U gREEN CORPS StIKIt
PRODUCtION FRE-
CUt DISCS
Pressure-sensitive adhesive backed discs
for easy application to and removal from
disc pad.
An all new mineral/bond construction and
tough "E" weight backing provide for a
fast cutting, long lasting abrasive disc.
Excellent for coarse sanding of hull and deck areas.
8" diameter Product ID grade Discs/box
01549 246U 80D 50
01550 251U 40E 50
01552 246U 24E 20
01556 246U 60E 50
3M
260L StIKIt FINISHINg FILM DISCS
Designed for use in scuff sanding before painting, as well as to remove
runs, dust nibs and excess orange peel from paint and gelcoat prior
to compounding. These 3M Stikit discs are individually linered and
constructed of a high-performance, aluminum oxide mineral bonded to
a smooth film, with a pressure-sensitive adhesive backing. Cuts fast,
lasts long, resists loading and leaves a consistent finish.
6" diameter grade Discs/ Box
01318 P1200 100
01319 P1000 100
01320 P800 100
01321 P600 100
3M
StIKIt LOW PROFILE
FINISHINg DISC PADS
Soft foam construction for fine finish sanding and
outstanding conformability to contours and curves.
For use with 3M Stikit Discs. Use on random orbital sanders
only. 6" (5/16-24 threaded shank). 10 pads per case.
05546
3M
StIKIt SOFt DISC PAD
Vinyl pad face provides good adhesion. Soft foam
construction and tapered edge offer a high degree
of conformability. Fits all standard (5/8" shaft) slow
speed polishers. Maximum safe operating speed 3000 rpm. For
use with 8" disc size.
05568
3M
StIKIt DISC PAD
Vinyl pad face provides good adhesion of Stikit
discs. Edges are contoured to allow for sanding
curves and close to mouldings. Fits all standard
(5/8" shaft) slow speed polishers. Maximum safe operating speed
3000 rpm. For use with 8" disc size.
05579
3M
StIKIt DISC PADS
The vinyl pad face provides good disc adhesion yet allows easy
disc removal. Both pads are lightweight, shock resistant and well
balanced. Maximum safe operating speed 7000 rpm. For use with
6" disc size. 10 per case.
05576
3M
StIKIt HAND PADS
Designed to be used with all grades of 3M Stikit
Discs. These hand pads are firm yet comformable
and are lightweight, making sanding of such areas as corners and
contours easier. 6" diameter. 10 per case.
05586
3M
StIKIt DISC ROLL
DISPENSERS
These sturdy metal dispensers provide a
convenient means of storage and single disc
dispensing of 3M Stikit Disc Rolls. Dispensers
can be wall or bench mounted and are also
portable. Holds two 125 count disc rolls. 5" or
6" diameter with 1" core. Products do not come with this dispenser.
05450
3M
255P HOOKIt gOLD DISCS
Premium paper backing, open coat with improved stearate system.
Fast cut, long disc life minimizes disc loading leaving an exceptionally
fine finish. 100 discs per box.
6" diameter grade
00201 P400
00203 P320
00204 P280
00206 P220
00208 P150
00209 P120
00210 P100
00211 P80
3M
255U gREEN CORPS HOOKIt
PRODUCtION FRE-CUt
DISCS
They attach as quickly as they cut and can be
reattached and reused until their full life is realized.
Designed for heavy bottom paint and gelcoat
removal, as well as for rough shaping of marine
fairing compounds. The 3M Hookit Soft Disc Pad was designed to
conform to the curves and contours found on boat hulls and decks.
8" diameter grade Discs/Box
01652 24E 20