Zinc, Paint & Accessories - Paynes Marine Group

742
Zinc, Paint & Accessories
Pettit
WHItE ENAMEL UNDERCOAt
A high filling, easy sanding marine type
undercoat designed for use on wood
surfaces. Provides a smooth base that allows
Z-Spar Enamel to dry to a uniform gloss and
appearance.
PEt105Q Quart
PEt105g Gallon
Interlux
BRIgHtSIDE PRIMER
Brightside Primer is a unique V.O.C. compliant,
single package, undercoater formulated for use
with Brightside Polyurethane or any one part
topside finish. Microshperes are used to give Brightside Primer superior
build and hide while improving flow and sandability. Brightside Primer is
used anywhere above the true waterline where a coating is needed to
provide a smooth, fair surface for overcoating with a topside enamel.
4279-1L Quart white
4279-4L Gallon white
4280-1L Quart grey
Pettit
EASYPOxY UNDERCOAt
Should be used as a base coat whenever the
surface to be painted is aged, cracked, checked, pitted or in any way
less than smooth. It can be applied to fiberglass, wood and previously
painted surfaces. It dries quickly and is easy to sand. White.
PEt6149Qt Quart
PEt6149gA Gallon
Interlux
EPOxY BARRIER-KOtE
Epoxy Barrier-Kote is the recommended
primer for use with two-part finishes such as
Perfection and can also be overcoated with
Brightside, Interlux Yacht Enamel, Interdeck and Bilgekote. Use Epoxy
Barrier-Kote over clear epoxies as a sanding surfacer and to eliminate
the effects of amine blush. Epoxy Barrier-Kote is bright white. Quart.
404/414-1L
Interlux
VINY-LUx PRIMEWASH
• Fast overcoating times
Viny-Lux Primewash is a two part zinc
chromate, vinyl butyral self etch primer, that is
used as a metal conditioner for adhesion prior to application of
other paints on metal.
353/354-1L Quart
355-1L Thinner quart
Pettit
2018 CLEAR SEALER
This is a phenolic resin-based sealer used for priming all types of raw
wood prior to painting. The sealer acts as a moisture barrier layer to
prevent peeling and excessive absorption of vehicle from undercoater
or varnishes by the new wood. 2018 Clear Sealer can be used under all
Pettit one-part undercoaters, varnishes and topside finishes. Quart.
PEt2018Qt
Interlux
CLEAR WOOD SEALER
Stops varnish from soaking into the wood and seals the
grain, thereby enabling subsequent coats of varnish or
paint to dry without "high and low" spots. This sealer
is particularly recommended for sealing plywood to resist cracking and
checking. Quart.
1026-1L
Interlux
CLEAR WOOD SEALER
• Fast drying formula, multiple build coats in one day
• For professional use
A fast drying wood sealer with excellent film build. Suitable for priming
wood prior to application of single pack varnishes or two component
urethane finishes. Due to its grain-filling properties, the use of Clear
Wood Sealer will cut down on the total number of coats required. The
fas drying formulation allows applicators to apply multiple coats in one
day.
YVA327 Base, 1L
YVA328 Curing agent, 1L
Pettit
RUStLOK StEEL PRIMER
A one package moisture cured polyurethane
coating designed for application over any steel
or cast iron surface, including galvanized or
stainless steel. Rustlok Steel Primer contains
aluminum flake pigment which forms a dense,
water impervious barrier. The result is excellent
corrosion protection. In addition, Rustlok's
polyurethane chemistry offers tremendous adhesive strength
and wetting ability. It is this combination that allows Rustlok to
perform well even when applied over rusted surfaces. It's an
easy-to-apply, effective, anti-corrosive barrier coating.
PEt6980Qt Quart
PEt6980gA Gallon
Pettit
MEtAL PRIMER
Metal Primer is made for metal application where
a primer is needed to provide adhesion plus offer
corrosion and rust resistance above and below
the waterline. It uses a corrosion inhibitive pigment to keep metal
surfaces in good condition. Metal Primer must be overcoated
with either 6627 Tie-Coat Primer or 4777/4778 High Build Epoxy
Primer prior to the application of anti-fouling bottom paints or
topside finishes. Quart.
PEt6455/044Qt