Zinc, Paint & Accessories - Paynes Marine Group
Zinc, Paint & Accessories - Paynes Marine Group
Zinc, Paint & Accessories - Paynes Marine Group
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
732<br />
<strong>Zinc</strong>, <strong>Paint</strong> & <strong>Accessories</strong><br />
Interlux<br />
REDUCINg SOLVENt 2316N<br />
A fast evaporating thinner for spraying two part<br />
polyurethanes or epoxies. Quart.<br />
2316-1L<br />
Interlux<br />
REDUCINg SOLVENt 2333N<br />
Reducing Solvent 2333N is a slow evaporating thinner for<br />
brushing two-part polyurethanes or epoxies. For use with<br />
most two-part polyurethanes and epoxy paints. Quart.<br />
2333-1L<br />
Interlux<br />
FIBREgLASS SURFACE PREP<br />
A mold release agent and wax remover, which<br />
eliminates the need for sanding bare fibreglass when<br />
used with Fibreglass No Sand Primer.<br />
YMA601-1L<br />
Pettit<br />
BOttOM PREP FIBERgLASS<br />
DEWAxER<br />
A blend of strong chemical solvents that strips all<br />
mold release from fiberglass surfaces. Will also<br />
slightly etch fiberglass to give a good surface for paint<br />
application. Quart.<br />
PEt15095Qt<br />
Pettit<br />
BIO-BLUE<br />
A powerful blend of cleaning agents and<br />
silica grit that de-waxes, etches, cleans<br />
and prepares bare fiberglass for painting.<br />
Regardless of the boat's age, the initial<br />
surface preparation is critical. Quart.<br />
PEt92Qt<br />
Aquagard<br />
180 SOLVENt WASH<br />
Aquagard 180 Fiberglass Solvent Wash is<br />
formulated to strip the mold release agent<br />
from a fiberglass surface. The fiberglass is<br />
also etched slightly to a fine smooth surface for paint application. Since<br />
Aquagard 180 Fiberglass Solvent Wash contains strong solvents, it<br />
should not be used on polyester resin that is not fully cured: excess<br />
etching or softening may occur.<br />
AQg30000 Quart<br />
AQg30100 Gallon<br />
Interlux<br />
FIBREgLASS SOLVENt WASH 202<br />
Fibreglass Solvent Wash 202 removes mold release<br />
agents, wax, oil and grease form hulls of bare fibreglass<br />
boats. Quart.<br />
202-1L<br />
Interlux<br />
INtERStRIP PAINt REMOVER<br />
Interlux Fibreglass Pintoff 299 <strong>Paint</strong> Remover has a heavy jelly-like<br />
consistency for easy application. It is designed specifically for the<br />
removal of antifouling paint only from fibreglass boats.<br />
299E-1L Quart<br />
299E-4L Gallon<br />
Recochem<br />
PAINt & VARNISH REMOVER<br />
13331 1 Litre<br />
13334 4 Litre<br />
e<strong>Paint</strong><br />
EP-StRIP<br />
Safe for use on antifouling paints, marine paints and varnish.<br />
EP-STRIP can be used on a variety of surfaces including wood,<br />
aluminum, gel coat and fiberglass.<br />
• Environmentally safe<br />
• Can be rolled, brushed or sprayed<br />
• Requires no neutralization<br />
• Thick composition clings to vertical surfaces<br />
EP-StRIP-g