fiber to the home FiberXport - H+E Dresel

Fiber Termination UnitThe FiberXport ® fiber termination unit combines fiber managementfeatures with the ability to insert a variety of data, voice and CATVmodules. Ease of installation and design for low-cost maintenance arekey features of the FiberXport ® concept. The fiber termination unit canbe closed with a dummy cover to minimize the initial investment. Theactivation of the CPE can be done without touching the fragile fibersthanks to the innovative click concept.Our ServiceGAPSIn an FTTH access network each client has to be configured, managed and monitored. A well-designedprovisioning system is required to reduce the operational impact of service activation, upgrades, monitoringand day-to-day operations.Genexis Automatic Provisioning System (GAPS) has specifically been designed for the provisioning ofGenexis CPEs in an FTTH network. It enables the operator to fully automate the installation, configuration,maintenance and monitoring process of all CPEs in their network from a central location, resulting in significantoperational benefits, including reduced operational expenses.Optical CATV receiverInputOutputOptical input power[dBm]Wavelength[nM]RF frequency range[MHz]PurposeOCG-14a -10 to -4 1290-1600 47-862 Multi-dwelling unitOCG-14c -10 to -4 1290-1600 47-862 Single-family unitOCG-14sa -10 to -4 1290-1600 47-2400 Multi-dwelling unitCATVCAThe optical CATV receiver can be installed in the Genexis CPE.Power is provided through the managed gateways, and theoptical power level is monitored. The module can be remotelyenabled or disabled by the management system.