Quotation Letter - IIT Mandi

No: IIT Mandi/SE-356/2012-13/8846-47Date:08-01-2013NOTICE INVITING QUOTATIONSealed items rate quotation as per schedule given below is hereby invited by theundersigned so as to reach in this office on or before 15-01-2013 upto 03:00 PM and shall beopened on the same day at 03:30 PM in the presence of contractors or their authorizedrepresentatives who may wish to be present at the time of opening.Name of work: P/F of aluminium partition works etc. at basement hall for the purposedCreche at Administrative Block of IIT Mandi (H.P.).------------------------------------------ As Per Schedule Attached ---------------------------------------Terms & Conditions:-1. The work will be carried out as per CPWD General Specifications for Civil works amended upto date & as per the instructions of the Engineer-in-charge.2. The work is of urgent nature and is to be completed within 15 days from issue of work orderotherwise penalty @ 0.5% per week or part thereof will be levied.3. All damages done during execution of the work is to be made good by the contractor andnothing extra will be paid separately for the same.4. The Prices quoted should be net and nothing extra is to be paid.5. Contractor shall abide by labour rules and regulations.6. All the applicable taxes shall be deducted from bill.7. All material to be used on the work will have to be got approved from the Engineer-incharge.COPY TO:-1. IIT Mandi Website.2. Notice Board.-sd-Superintending Engineer-sd-Superintending EngineerPhone: 01905-237971, Fax: 01905-237945 e-mail:- se_kapur@iitmandi.ac.in

5Providing and fixing aluminium round shape handleof outer dia 100mm with SS screws etc. complete asper direction of Engineer-in-charge5.1 Anodized (AC 15 ) aluminium 2.00 each6Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less thangrade AC 10 as per IS : 1868 ) transparent or dyedtorequired colour or shade with necessary screwsetc. complete :6.1 200x10 mm 2.00 eachProviding and fixing aluminium hanging floor door7stopper ISI marked anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparentor dyed to required colour and shade withnecessary screws etc. complete.7.1 Twin rubber stopper 1.00 eachProviding and fixing aluminium die cast body8tubular type universal hydraulic door closer (havingbrand logo with ISI, IS : 3564, embossed on thebody, door weight upto 35 kg and door width upto700 mm) with necessary accessories and screwsetc. complete.Total1.00 each-sd-Superintending Engineer