TE 1000-AVR / TE 1500-AVR

enObligation signsWear eyeprotectionWear a hardhatWear earprotectionWearprotectiveglovesLocation of identification data on the power toolThe type designation can be found on the type identificationplate and the serial number on the side ofthe casing. Make a note of this data in your operatinginstructions and always refer to it when making anenquiry to your Hilti representative or service department.Type:Serial no.:WearbreathingprotectionSymbolsRead theoperatinginstructionsbefore useReturn wastematerial forrecycling.ChiselingChisel positionadjustmentVolts Amps AlternatingcurrentHertzDoubleinsulatedLock symbolEquipped withtheftprotectionsystem2. Description2.1 Use of the product as directedThe power tool is an electrically-powered breaker with electropneumatic hammering mechanism designed forheavy chiseling work.The power tool is designed for breaking / removing and demolishing concrete, masonry, stone or asphalt.Working on materials hazardous to the health (e.g. asbestos) is not permissible.Nationally applicable industrial safety regulations must be observed.The power tool is designed for professional use and may be operated, serviced and maintained only by trained,authorized personnel. This personnel must be informed of any special hazards that may be encountered. Thepower tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel orwhen used not as directed.2