Tie Plate - Pandrol USA

TIE PLATEPandrol tie plates are designedto be used for 5 1/2", 6" or100 RB (100-8) base rail withPandrol rail clips and Pandrolscrew spikes.T R A C K S Y S T E M S

TIE PLATESPECIFICATIONS:• Rolled to AREMA materialspecifications.• Palletizing available at 100plates per pallet• Can be shipped loose ingondola or dump truck3 3/4"6 1/16"1:40 CANT 5/8" 1/2"16"TPL-P27 3/4"4 3/4"TPL-P2-6" - approximate weight aspunched 25.2 lbs.CONVENTIONAL PUNCHING13 5/8"6" Rail BasePart NumberTPL-P1-6"7 3/4" x 16"w/6, 11/16" square holes5 9/16"TPL-P2-6"7 3/4" x 16"w/4, 1" round holesand 2, 11/16" square holes5 1/2" Rail Base3 3/4"1:40 CANT15"5/8" 1/2"TPL-P26M-5.5" 7 3/4" x 15"w/4, 1" round holesand 2, 11/16" square holesTPL-P54RB100 RB (100-8) Rail7" x 15 3/16"w/6 1 1/16" round holesDIMENSION A4 1/2"TPL-P26MOther sizes and hole punching maybe available.TPL-P26M-5.5" - approximate weight aspunched 23.4 lbs.13 1/8"NOTE: Standard punching shown. Square holesare 11/16". Round hole punching available up to 15/32" maximum. 1" most common.U S APandrol USA, LP501 Sharptown RoadP.O. Box 367Bridgeport, NJ 08014(856) 467-3227(800) 221-CLIPLearn More >www.pandrolusa.com9/13 .5MIn the interests of product improvement, Pandrol reserves the right to change the specifications contained herein at any time without prior notice.