Technical Data Sheet - Pro-Spray

An Alco Industries Company600 Nova Drive SE • Massillon, Ohio 44646www.ProSprayFinishes.comT E C H N I C A L D A T A S H E E TPage 1 of 2 TDSNRPMC3000 - 0712Matte ClearcoatPMC-3000Technical Support: 1-800-776-0933Product Description Pro-Spray® PMC-3000 Matte Clearcoat is a two-component flat clear designed to dry to a mattefinish while still providing excellent durability. PMC-3000 offers excellent spray characteristics, is ideal for use when itis necessary to match a matte, OEM finish and is also excellent for custom “flat” paint jobs.ComponentsClear PMC-3000Activators ICA series 799-803Thinners ICR series 1692-1695Substrates Pro-Spray Basecoat R-6028 Basecoat Blender Sanded OE ClearcoatSurface PreparationMask entire vehicle to eliminate unwanted overspray.Mix RatioRefer to “Activator and Thinner Selection Guide -Pot Life @ 72ºF / 22.2ºC1 hourViscosity @ 72ºF / 22.2ºC12—13 secs DIN4Clear2 PartsActivator1 PartThinner up to 10%Gun Set UpAir PressureHigh Efficiency1.2mm—1.4mmHVLP1.2mm—1.4mmHigh Efficiency15—29psi@ the gunHVLP6—10 psi max@ the capApplicationNOTE: Refer to individual gun manufacturerfor proper spray gun setting 2 coats 10—15 minutes flashbetween coats

Matte ClearcoatPMC-3000Flash/Dry Times @ 72ºF / 22.2ºCAir DryFlash between coats: 10 — 1 5 minutesDust free: 30 minutesTime to assemble: 2 — 3 hoursForce Dry30 minutes @ 140°F/60°CBlendingPolishingNot recommendedSanding: N/ACompounding: N/ASpecial Notes / Clean Up!Clean Up Clean equipment after use with a cleaning solvent. Dispose of solvent according to state, local andfederal regulations.Physical DataVOC (RTS) per U.S. Gal3.65 lbs/gal, 438.42 g/lHealth and SafetyFor professional use only. KEEP OUT OF REACH OF CHILDREN. WARNING! CONTENTS ARE FLAMMABLE. VAPOR ANDSPRAY MIST IS HARMFUL. SKIN AND EYE IRRITANT.Do not handle the Pro-Spray products until the Material Safety Data Sheets have been read and understood in theirentirety. Ensure that all employees are trained on Material Safety Data Sheets and all chemicals with which they comeinto contact. The manufacturer recommends the use of an air-supplied respirator when exposed to vapors or spray mist.Wear protective clothing, gloves and eye safety with a side shield.This data sheet information is given in good faith but without warranty. The information contained herein represents thecurrent state of our knowledge and is intended as a guide to our products and their uses; it is not intended for insuranceof certain product properties or of their specific applications.Follow all warnings on product labels.TDSNRPMC3000– 0712 Page 2 of 2