Density and VCF correction - QuantityWare

More documents

Recommendations

Info

Parameters: /QTYW/DCF - Density Correction Factor/QTYW/DCFT - Density Corr. Fact. Temp. Unit/QTYW/VCC - Volume Correction ConstantTest program:/QTYW/DENSITY_VCF_CORR_TEST8
3. Formula and requirementsImplemented formulaThe implemented formula provides a linear correction.Density Correction:Density (base temperature) = Density (observed temperature) + * delta-temperatureVCF (Volume Correction Factor) Correction:VCF = 1 - * delta-temperatureWhere: delta-temperature = observed temperature – base temperature = material specific constantThe implementation works internally with density in Kg/m3 and the temperature unit of the basetemperature. If necessary, input data will be converted. The result will be converted back to theunits of the conversion group.Ranges and RoundingRanges of density and temperatureThere is no check implemented to verify these ranges, as the standard is intended to begeneric.RoundingRounding of input and output is NOT implemented, but can be performed by the inclusion offunctions (provided by QuantityWare) in the conversion group external calls sequence, beforeand/or after the calculation function.The following functions are currently available:/QTYW/ROUND_BAS_DENSITY_1_1 Rounding BASE DENSITY by 1 decimal to nearest 1/QTYW/ROUND_BAS_DENSITY_1_5 Rounding BAS DENSITY by 1 decimal to nearest 5/QTYW/ROUND_BAS_DENSITY_4_1 Rounding BAS DENSITY by 4 decimals to nearest 1/QTYW/ROUND_OBS_DENSITY_1_1 Rounding OBSERVED DENSITY by 1 decimal tonearest 1 (0.1)9
Page 1 and 2: BCP 1.0AStandardImplementation:Dens
Page 3 and 4: ContentsBCP 1.0A ..................
Page 5 and 6: 1. InstallationThe technical implem
Page 7: Q017 - VOLUME CORRECTION, REL. DENS
Page 11 and 12: 4. Installation TestAlong with the

Density and VCF correction - QuantityWare

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?