1 - vacupress.de

VACUPRESS 620S3 - UNILOCK
UNILOCK - The Standard for
practice-oriented material fixing
Since its introduction in 1990 the VACUPRESS UNILOCK-system has revolutionized the handling of
vacuum-deep-drawing units. With the current stage of development - VACUPRESS 620 S3 - many
details could be optimized again - improving the ergonomics has been the center of our considerations.
1
2
3
Tantering frame easy to open approx. 45°
with the usual lift of the main handle
Easy insertion of material. The tantering frame stays at
the machine and doesn´t need to be removed.
Easy closing of the tantering frame:
Downwards with main hadle - Interlock - Done.
From experience - to practice
With further development of the UNILOCK-system, the workingarea
has been raised to the level of the clamped material. Hereby
inserting the material becomes easier and the results of the deepdrawing-process
are getting optimized by a better utilization of the
material.
• fast and uncomplicated handling
• opening and closing of the working frame
with only one handle
• supported by gas-shock
• locking with articulate hinges
Witzel VACUPRESS
Inh. Hendrik Witzel
Apparatebau und technisches Zubehör
Max Keith Str. 66 - 45136 Essen, Germany
Tel. +49 201 6462-284 - Fax: +49 201 6462-852
info@vacupress.de / www.vacupress.de
• no adjustment to different material thickness
• no bothering levers and gear
• no sophisticated master lock devices
Vacupress 620 S3 UNILOCK moulds all thermoplastic materials. The integrated vacuum-control guarantees
highest molding accuracy and efficient production. Its powerful vacuum-pump with high
reserve capacity is lifetime maintenance-free and, due to permanent improvements, it is running
smooth as never before - We assist you making you workplace as ergonomic as possible!
© 2012