Door closer ASSA FD40 - ASSA ABLOY
Door closer ASSA FD40 - ASSA ABLOY
Door closer ASSA FD40 - ASSA ABLOY
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ASSA</strong> <strong>FD40</strong><strong>Door</strong> Closer for Fire- and Smoke Separating <strong>Door</strong>sApplication<strong>ASSA</strong> fire door <strong>closer</strong>s meet the requirements for most typesof fire doors. They are well-suited for controling one or morefire-rated doors e.g. in hospitals, apartment buildings for theelderly, day-care centres, hotels, public areas and industrialcomplexes. Fire doors in a building with fire cells mustfunction if a fire breaks out to facilitate for both emergencyexiting and for fire department. Areas that require doorswith hold-open device should have some kind ofelectromechanical hold-open function combined withsmoke detectors and/or be connected to an automatic firealarm. In the case of fire or smoke development, a smokedetector and/or fire alarm the control unit will release theelectromechanical hold-open device. The door <strong>closer</strong> isactivated and closes the door or doors in correct order witha coordinator.Features• <strong>Door</strong> <strong>closer</strong> body is made of cast aluminium• Removable body cover in several colours:silver, white, gold and brown• Finishes available on request: NCS, RAL, stainless, brassand chrome• Adjustable closing force, 2-6 EN• Available with standard sliding arm and hold-open devicefor sliding arm• Concealed fitting• Temperature compensated valves between -25°C - + 45°C• CE-certified• EN 1154, 1155 och 1158<strong>ASSA</strong> <strong>ABLOY</strong>, the global leaderin door opening solutions.
<strong>ASSA</strong> <strong>FD40</strong><strong>Door</strong> Closer for Fire- and Smoke Separating <strong>Door</strong>sAccessoriesD4002 BC<strong>Door</strong> <strong>closer</strong> body, size 2 - 6 EN adjustable. <strong>Door</strong> width1 400 mm. Latching and closing speed and back check (BC)is adjustable with valves.<strong>FD40</strong>48/4049The mounting plates are used for assembly on the closingside in combination with sliding arms <strong>FD40</strong>51 - 4054, whenthe frame is deeper than 30 mm. Mounting plate <strong>FD40</strong>48 formounting of the sliding arms and <strong>FD40</strong>49 to cover the spacebetween the mounted <strong>FD40</strong>48 plates. <strong>FD40</strong>49 isadjusted to fit the door width.D3030Mounting plate D3030, can be usedfor a narrow frame or rebated door leaf.D3030<strong>FD40</strong>50Sliding arm with electromechanical hold-open function forsingle doors. Hold-open angle 80° – 130°.<strong>FD40</strong>51Sliding arm <strong>FD40</strong>51 with built-in door coordinator fordouble door. Suits both right and left doors. <strong>FD40</strong>51: Slidingarms are mounted in the frame on opening side. Openingangle is up to 170° depending on the door construction.<strong>Door</strong> width 1 250-2 500 mm. <strong>FD40</strong>51: Sliding arm ismounted in the door frame on closing side. Opening angleis up to ca 120° depending on the door construction. <strong>Door</strong>width 1 350 - 2 500 mm.<strong>FD40</strong>52Sliding arm <strong>FD40</strong>52 with electromechanical hold-openfunction for the active door leaf. The passive door leaf isopened manually. Suits both right and left handdoors. <strong>FD40</strong>52: Opening angle between 80° - 130°.Sliding arms are mounted on opening side. <strong>Door</strong> width1 250-2 500 mm. <strong>FD40</strong>52: Opening angle is 80° - 120°.Sliding arm is mounted in the frame on the closing side.<strong>Door</strong> width 1 350 - 2 500 mm.<strong>FD40</strong>50<strong>FD40</strong>51Adjusting latching and closing speed, delayed closing andback checkBack checkfrom 75°Hold-open magnets are recommended in extra large andheavy doors over 1 250 mm or doors where the hold-openangle must be over 130°Slidingarm<strong>Door</strong> widthHold open angleOpening sideClosingside<strong>FD40</strong>50 max. 1 250 mm 80°-130° 80°-120°Controled closing180°-0°Opening angleOpening-<strong>FD40</strong>51 1 250-2 500 mm max.Closing side120°-170°Min. door leaf width, passive doorOpening sidemin. 350 mmAdjustablelatch 15° – 0°Closing sidemin. 400 mm<strong>FD40</strong>52 1 250-2 500 mm 80°-130° 80°-120° min. 350 mm min. 400 mm<strong>FD40</strong>53 1 250-2 500 mm 80°-130° 80°-120° min. 350 mm min. 400 mm<strong>FD40</strong>54 1 250-2 500 mm 80°-130° 80°-120° min. 350 mm min. 400 mm<strong>ASSA</strong> <strong>ABLOY</strong>, the global leaderin door opening solutions,dedicated to satisfying end-userneeds for security, safety andconvenience.<strong>ASSA</strong> ABP.O. Box 371SE-631 05 EskilstunaSwedenphone +46 (0)16 17 70 00fax +46 (0)16 17 70 49Customer support:phone intl. +46 (0)16 17 71 00phone nat. 0771-640 640fax +46 (0)16 17 73 72e-mail: helpdesk@assa.sewww.assa.se<strong>FD40</strong>52<strong>FD40</strong>53Sliding arm <strong>FD40</strong>53 with electromechanical hold-open functionfor the active and passive door leaf. Suits both right andleft hand doors. <strong>FD40</strong>53: Opening angle 80° - 130°. Slidingarms are mounted on opening side. <strong>Door</strong> width1 250-2 500 mm. <strong>FD40</strong>53: Opening angle is 80° - 120°.Sliding arm are mounted in the frame on the closing side.<strong>Door</strong> width 1 350 - 2 500 mm.<strong>FD40</strong>53<strong>FD40</strong>54Sliding arm <strong>FD40</strong>54 with electromechanical hold-open functionfor the passive door leaf. The active door leaf is openedmanually. Suits both right and left handdoors. <strong>FD40</strong>54: Sliding arms are mounted on opening side.Opening angle 80° - 130°. <strong>Door</strong> width 1 250-2 500 mm.<strong>FD40</strong>54: Sliding arm is mounted in the frame on theclosing side. Opening angle is 80° - 120°. <strong>Door</strong> width1 350 - 2 500 mm.<strong>FD40</strong>54M1826.0703 Artnr 702276
Change language