12.07.2015 Views

ULTRABOND ECO 995 - Mapei

ULTRABOND ECO 995 - Mapei

ULTRABOND ECO 995 - Mapei

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Material Safety Data SheetMaterial Name: <strong>ULTRABOND</strong> <strong>ECO</strong> <strong>995</strong>ID: SAH00516Proprietary NJTSRN 5010110 5-10101-68-8 Methylene bis(phenylisocyanate) (MDI) 1-557-11-4 Stearic acid 0.5-1.5* * * Section 4 - First Aid Measures * * *First Aid: EyesImmediately flush eyes with plenty of water for at least 15 minutes. If irritation persists, get medical attention.First Aid: SkinFlush with large amounts of water. If irritation persists, get medical attention.First Aid: IngestionFlush out mouth with water. If ingestion of a large amount does occur, seek medical attention. Do not inducevomiting.First Aid: InhalationImmediately remove the affected person to fresh air. If symptoms persist, get medical attention.First Aid: Notes to PhysicianProvide general supportive measures and treat symptomatically.* * * Section 5 - Fire Fighting Measures * * *General Fire HazardsSee Section 9 for Flammability Properties.This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose amoderate fire hazard.Hazardous Combustion ProductsIrritating and toxic gases or fumes may be released during a fire. Upon decomposition, this product emits carbonmonoxide, carbon dioxide and/or low molecular weight hydrocarbons.Extinguishing MediaDry chemical (preferred), foam, water.Fire Fighting Equipment/InstructionsFirefighters should wear full protective clothing including self contained breathing apparatus.NFPA Ratings: Health: 2 Fire: 0 Reactivity: 0Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe* * * Section 6 - Accidental Release Measures * * *Personal PrecautionsWear appropriate protective equipment and clothing during clean-up.Containment ProceduresDike the spilled material, where this is possible. Absorb with inert absorbent such as dry clay, sand ordiatomaceous earth, commercial sorbents, or recover using pumps. Scoop up used absorbent into drums or otherappropriate container.Environmental PrecautionsDispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.Clean-Up ProceduresAttempt to reclaim the free product, if this is possible. Shovel the material into waste container. Thoroughly washthe area with water after a spill or leak clean-up. Keep out of the reach of children.Evacuation ProceduresNone identified.Special ProceduresRegulations vary. Consult local authorities before disposal.____________________________________________________________Page 2 of 7 Issue Date: 04 February 2010 Revision: 2.0001 Print Date: 2/4/2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!