Compressors

1/2"Sq DriveDigital TorqueAdaptor withAngle Function20-200Nm1/2"Sq Drive Digital Torque Wrenchwith Angle Function 20-200NmTORQUESIN BOTHDIRECTIONSMicrometer Style Torque WrenchesModel No. STW702Model No. STW703Model No. STW701NEWTORQUESIN BOTHDIRECTIONS• Designed for use with a standard ratchet or breaker bar.• Ideal for work around the engine bay and the tightening ofwheel nuts to factory specifications.• Large LCD display with LED/audible alarm indicatingachieved and target torque levels.• Selectable readings in Nm, lb.ft, lb.in or kg.m.• Accurate to ±2% of statedcapacity and operatesin either direction.• Model No. STW291• List Price £129.95SAVE54%£59.95 exc.VAT£71.94 inc.VAT• LCD read-out with LED/audible alarm indicatesachieved and target torque levels.• Features angle mode, eliminating the need for angle gaugesand protractors providing the most accurate and fastest wayto measure torque plus angle tightening sequences.• Will also accumulate angle measurement when multipleturns are required, ideal for use where access is limited.• Selectable read-out in Nm, lb.in, lb.ft, kgf.m or degrees.• Accurate to ±2% between 10%and 100% of wrench’sstated capacity.• Model No. STW306• List Price £199.95SAVE40%£119.95 exc.VAT£143.94 inc.VAT• Manufactured from hardened and tempered ChromeVanadium steel with a polished satin finish.• Smooth action ratchet heads with flip reverse.• Calibration tolerance in accordance with BS EN ISO6789:2003.• Scales graduated in both Nm and lb.ft.• Supplied in storage cases.ModelNo.Drive/RangeListPriceExc. VATSAVEInc. VATSTW701 1/4"Sq/4-20Nm £79.95 £54.95 £65.94STW702 3/8"Sq/20-100Nm £97.45 £64.95 £77.94STW703 1/2"Sq/40-200Nm £114.95 £69.95 £83.94up to39%3/4"Sq DriveDigital TorqueAdaptor100-500NmNEW3/4"Sq Drive Push-ThroughCalibrated Torque WrenchTORQUESIN BOTHDIRECTIONSBreaker BarsModel No. AK729Model No. AK730Model No. AK7302• Designed for use with a standard ratchet or breaker bar.• Ideal for work around the engine bay and the tightening ofwheel nuts to factory specifications.• Large LCD display with LED/audible alarm indicatingachieved and target torque levels.• Selectable readings in Nm, lb.ft, or kg.m and accurate to±2% of stated capacity.• Memory stores up to 50 readingsand features auto shutoff after 80 seconds.• Model No. STW292• List Price £189.95SAVE47%TORQUESIN BOTHDIRECTIONS£99.95 exc.VAT£119.94 inc.VAT• Range: 237-983Nm(150-750lb.ft).• Length: 1225mm.• Manufactured from Chrome Vanadium steel.• Calibration tolerance in accordance withBS EN ISO 6789:2003.• Scales graduated in both lb.ft and Nm.• Model No. STW601• List Price £539.95£329.95 exc.VAT£395.94 inc.VATSAVE39%• Hardened and tempered Chrome Vanadiumsteel bar with high chrome finish.• Long, slim style handle and spring loadedsocket retention.• Fully replaceable knuckle joint.ModelNo.Drive/LengthListPriceExc. VATSAVEInc. VATAK729 3/8"Sq/450mm £18.95 £9.95 £11.94AK730 1/2"Sq/600mm £24.95 £13.95 £16.74AK7302 1/2"Sq/750mm £29.95 £16.95 £20.34up to47%OffsetRatchet WrenchesModel No. AK9673/8"Sq Drive Low ProfileRatchet WrenchNEW13pc 3/8"Sq DriveLow ProfileSocket SetNEW• Chrome Vanadium steel reversible ratchetwrenches with offset handle and anti-slip grip.• Features ultra-smooth 72-tooth ratchet actionallowing ratcheting in increments of 5° for greatertorque in restricted areas.ModelNo.Drive41pc 1/4"Sq DriveSocket SetWallDrive ®DuoMetric ®• Chrome Vanadium WallDrive ® sockets.• Flip reverse gear-to-gear ratchet with quick socket release.• Full range of Imperial/Metricsockets up to 1/2"/13mmincluding deep sockets.• Model No.AK690• List Price £59.95ListPriceSAVE38%Exc. VATSAVEInc. VATAK966 1/4"Sq £24.95 £12.95 £15.54AK967 3/8"Sq £29.95 £15.95 £19.14AK968 1/2"Sq £34.95 £18.95 £22.74up to48%£36.95 exc.VAT£44.34 inc.VAT• Manufactured from hardened and tempered ChromeVanadium steel with a fully polished mirror finish.• Low profile 60-tooth pear-headratchet with super slim handle.• Features flip reverseand quick releasemechanism.• Model No. AK5781• List Price £24.9545pc 3/8"Sq Drive Socket SetWallDrive ® - DuoMetric ®• Flip reversegear-to-gearratchetwithquicksocketrelease.• ChromeVanadiumWallDrive ®standard anddeep sockets upto 3/16"/22mm.• Model No. AK692• List Price £109.95£69.95 exc.VAT£83.94 inc.VATSAVE36%SAVE36%£15.95 exc.VAT£19.14 inc.VATFREE3/8"Sq DriveMagnetic SocketHolder Rail• Model No. AK27078• List Price £17.95• Manufactured from hardened and tempered ChromeVanadium steel with a fully polished mirror finish.• Low profile 12-point Walldrive ® sockets with a maximumoverall length of just 20mm.• Up to 33% shorter than a traditional standard type socket.• Designed for use where access is restricted.• Contents: Sockets; 8-19mm,60-Tooth Pear-HeadRatchet.• Model No. AK5780• List Price £79.9532pc 1/2"Sq Drive Socket SetWallDrive ® - DuoMetric ®• Flip reversegear-to-gearratchetwithquicksocketrelease.• 24 x 6ptWallDrive ®sockets coversizes from8-32mm and3/8"-11/16".• Model No. AK693• List Price £127.45£79.95 exc.VAT£95.94 inc.VATSAVE44%SAVE37%£44.95 exc.VAT£53.94 inc.VATFREE1/2"Sq DriveMagnetic SocketHolder Rail• Model No. AK27079• List Price £19.95Promotion Code XMAS12 Prices exclude VAT unless stated otherwise23