Maxant Techline Illuminators.pdf - Chesapeake Medical Systems

BRIGHT BRIGHTER BRIGHTESTONE ILLUMINATOR DESIGNTHREE LIGHT SOURCES—featuring the EvenVue Reflector System—

TECHLINE by... by...One universal illuminator design available in multiple lighting configurations.FEATURE BENEFITS FEATURE BENEFITSOne universal TECHLINEilluminator designavailable in a variety oflighting configurations200 Series, Two Lamp300 Series, Three Lamp400 Series, Four LampDUAL BRIGHTNESSOPTION Available onTECHLINE 300and 400 SeriesThin, 3 3 /8” Depth,Steel ConstructionTECH-GRIP, RollerGravity Film HoldingSystemCluster SwitchingSTANDARDEvenVue ReflectorSystem1. One universal body design allowsdifferent light sources to be grouped ina single facility.2. Engineered placement of lampscombined with EvenVue ReflectorSystem provides optimum lightdistribution for all lamp configurations.3. Provides the radiologist the opportunityto utilize the TECHLINE’s engineereddesign with the preferred light source.The TECHLINE is available in the following lighting configurations:1. Standard two lamp light source forreading films of normal density.1. Three lamp light source providesadditional brightness preferred by someradiologists.1. Four Lamp light source creates thebrightest techline illumination.1. The DUAL BRIGHTNESS Optionprovides the flexibility of either HIGH orLOW illumination. All lamps areilluminated in the HIGH and LOWmodes for uniform light distributionacross the entire viewing panel.2. One Brightness control switch governseach tier.3. Film Activated Switching comesSTANDARD with the DUALBRIGHTNESS OPTION ONLY.1. Thin profile is clean, simple andunobtrusive.2. Recess mounted configurations mountflush in walls of standard thickness.3. Durable steel construction is resistantto damage.1. The TECH-GRIP’s engineered designprovides maintenance free reliabilityand performance.2. The TECH-GRIP accommodates all filmthicknesses and requires no fieldadjustments.3. The TECH-GRIP is medium GRAY incolor on a white illuminator backgroundwhich conforms to most medical facilitydecors.1. Single, centrally located control area(bottom center of all TECHLINE singleand double tier configurations) providesmaximum operating convenience.2. Simple switch pattern which correlatesto panel layout allows for instinctivecontrol of all lighted surfaces.1. MAXANT’s EvenVue reflector systemprovides consistent, even lightdistribution throughout the viewingpanel.2. The EvenVue finish features a highlyreflective finish for maximumconsistency and long lasting durability.Continuous bottomfilm ledgeMinimal 1.8” separationbetween tiers of doubletiered fixturesEngineered designeasily servicedU.L. Listed& C.S.A. ApprovedWhite PowderCoat FinishFilm ActivatedMicro Switch(OPTIONAL)Multi-PanelMaster Switch(OPTIONAL)Surface Mounted ElectricHardware Location(OPTIONAL)Re-Mount Retrofit Kit(Post Sale Option)“THE BEST VALUE AND PERFORMANCE IN DIAGNOSTIC IMAGING”1. Allows for the reading of multiple smallfilm formats on a viewing area.1. Provides a viewing environment for topto bottom image comparison whichminimizes eye shift and distractions.2. Allows for minimal distance betweenfilms for optimum detection of patientirregularities.1. All surface and recess mountedTECHLINE fixtures can be servicedwithout removing them from theirinstalled position.2. Viewing panels are easily removed forcleaning and lamp replacement withoutthe requirement of tools.3. Each TECHLINE viewing area has aseparate front wireway panel which iseasily removed for access to internalcomponents.1. All TECHLINE illuminator configurationsare U.L. Listed and C.S.A. approvedfixtures.2. Meets all hospital, clinic and otherconstruction safety requirements.1. Standard Hospital White color providescosmetic compatibility with all medicalfacility decors.2. Durable coating provides a chip andwear resistant surface which iseasily cleaned.3. Cosmetically compatible with mediumgray film grip and plexi holder.1. Provides operating convenience byactivating the lamps when the film isinserted in the film grip.2. Eliminated excess light fromsurrounding panels when the filmactivated mode is used.3. Reduces room heat build up from anypanels not in use.4. Three way rocker control switch allowsflexibility for constant light or filmactivated light.1. Single master control switchprovides convenient ON/OFF fixturecontrol.2. Master Switches can be configuredon a per fixture basis or on aper tier basis.1. An OPTIONAL power location forsurface mount hardwiring allows fordirect wiring to wall power source ofsurface mounted fixtures.1. All TECHLINE fixtures can be fieldretro-fitted to a surface or recessmounted fixture.2. Eliminates costly Restocking Charges.3. Provides maximum post-sale mountingflexibility.MAXANT Technologies, Inc. 7540 Caldwell Avenue Niles, IL 60714Toll Free: (800) 307-4190 Phone: (847) 588-2280 Fax: (847) 588-1920

TECHLINE SPECIFICATIONSDESCRIPTION DIMENSIONS 200 SERIES-2 LAMP 300 SERIES-3 LAMP 400 SERIES-4 LAMPSurface Mounted Shipping Shipping ShippingViewing Area* Length Height Catalog# Wt. Lbs. Catalog# Wt. Lbs. Catalog# Wt. Lbs.Single Panel 14 X 17” 14” X 17” 14” 21” TS-201 24 TS-301 24 TS-401 242 Panel side by side 28” X 17” 28” 21” TS-202 44 TS-302 44 TS-402 443 Panel side by side 42” X 17” 42” 21” TS-203 64 TS-303 64 TS-403 644 Panel side by side 56” X 17” 56” 21” TS-204 64 TS-304 84 TS-404 845 Panel side by side 70” X 17” 70” 21” TS-205 107 TS-305 107 TS-405 1076 Panel side by side 84” X 17” 84” 21” TS-206 125 TS-306 125 TS-406 1251 Over 1 2 X 14” X 17” 14” 42” TS-211 37 TS-311 37 TS-411 372 Over 2 2 X 28” X 17” 28” 42” TS-222 82 TS-322 82 TS-422 823 Over 3 2 X 42” X 17” 42” 42” TS-233 125 TS-333 125 TS-433 1254 Over 4 2 X 56” X 17” 56” 42” TS-244 158 TS-344 158 TS-444 1585 Over 5 2 X 70” X 17” 70” 42” TS-255 307 (crated) TS-355 307 (crated) TS-455 307 (crated)6 Over 6 2 X 84” X 17” 84” 42” TS-266 346 (crated) TS-366 346 (crated) TS-466 346 (crated)Recess Mounted Wall Cut-Out** Shipping Shipping ShippingViewing Area* Length Height Catalog# Wt. Lbs. Catalog# Wt. Lbs. Catalog# Wt. Lbs.Single Panel 14 X 17” 14” X 17” 14.75” 21.75” TR-201 26 TR-301 26 TR-401 262 Panel side by side 28” X 17” 28.75” 21.75” TR-202 45 TR-302 45 TR-402 453 Panel side by side 42” X 17” 42.75” 21.75” TR-203 64 TR-303 64 TR-403 644 Panel side by side 56” X 17” 56.75” 21.75” TR-204 87 TR-304 87 TR-404 875 Panel side by side 70” X 17” 70.75” 21.75” TR-205 107 TR-305 107 TR-405 1076 Panel side by side 84” X 17” 84.75” 21.75” TR-206 128 TR-306 128 TR-406 1281 Over 1 2 X 14” X 17” 14.75” 42.75” TR-211 39 TR-311 39 TR-411 392 Over 2 2 X 28” X 17” 28.75” 42.75” TR-222 86 TR-322 86 TR-422 863 Over 3 2 X 42” X 17” 42.75” 42.75” TR-233 126 TR-333 126 TR-433 1264 Over 4 2 X 56” X 17” 56.75” 42.75” TR-244 165 TR-344 165 TR-444 1655 Over 5 2 X 70” X 17” 70.75” 42.75” TR-255 328 (crated) TR-355 328 (crated) TR-455 328 (crated)6 Over 6 2 X 84” X 17” 84.75” 42.75” TR-266 364 (crated) TR-366 364 (crated) TR-466 364 (crated)*Viewing height is actually 16.5” in order that extraneous light is eliminated when standard 14” x 17” film is inserted in the Roller Gravity Grip.**Overall Recessed Fixture dimensions, including recessed trim length and height, are each 3” greater than Surface Mounted Dimensions.

TECHLINE Bid SpecificationLIGHT SOURCE & LUMINANCE:Utilizing a universal body design, the TECHLINE series is available in any of the following light sources.Illumination Levels Amps Voltage Fluorescent(Expected Minimum cd/m 2 ) Per Panel Requirements Lamp TypeTECHLINE 200 SERIES 2000 0.75 118V 60 Hz (2)-F15lT8/Dper panelTECHLINE 300 Series 0.66 118V 60 HzStandard High Intensity 3500* (3)-F15T8/DOptional Dual Intensity - Low Mode 2500 per panelOptional Dual Intensity - High Mode 3500*TECHLINE 400 Series 0.70 118V 60 HzStandard High Intensity 4000* (4)-F15T8/DOptional Dual Intensity - Low Mode 2000 per panelOptional Dual Intensity - High Mode 3800**The noted series exceeds the American College of Radiology recommended light level of 3000 cd/m 2 forMammography viewing.Published readings are 3% less than actual test levels to allow for decreased light output as a result of normal usage.These light levels are taken from procedures specified by the German DIN 6856 standard. Currently this is the onlypublished standard for evaluating the luminance levels of x-ray illuminators. These levels were measured under thefollowing conditions: an ambient temperature of 21º Celsius (70º Fahrenheit), 118V line voltage, and new lamps. Lightlevels measured in the field may vary with the local environment, including: lamp age, line voltage, ambient temperature,and lamp temperature. These measurements are subject to change without notice.SPECIFICATION DATA:BODY CONSTRUCTION:18 Gauge Welded Steel construction, 3 3 /8” deep body.BALLASTS: All ballasts are U.L. listed and C.S.A. approvedrapid start, low leakage, thermally protected, Class P type.These ballasts have self starting reliability exceeding 10,000cycles with an anticipated 50,000 hours of operating life.LINE CORD AND PLUG: Each surface mounted fixturecomes standard with a grounded chassis, 7’ line cord andNEMA 5-15P 2-pole, 3 wire ground.FILM GRIP: Roller gravity film holding systemaccommodates all film thickness variations. This grip willnot scratch or tear film. Requires no field adjustments.Open sides facilitate viewing of oversize film.CONTINUOUS BOTTOM FILM LEDGE: Allows for theplacement of small film formats on the top and bottomof viewing area.FINISH: Powder coated white finish is bonded to all steelsurfaces to provide durable chip and wear resistant outersurface.Highly reflective inner finish provides optimal lightdistribution.DIFFUSING PANEL: 1/8” shatter resistant, U.L. Listedtranslucent thermoplastic.SWITCHES: The standard two position rocker switchprovides manual ON/OFF lighting for each viewing area.ENGINEERED TWO TIERED FIXTURE DESIGN: Two tierconfigurations have a minimal separation of 1.8” between tiersallowing for convenient top to bottom image comparison.ENGINEERED DESIGN FOR EASY SERVICING: Viewing panelis easily removed without tools. Fixture is serviceable withouthaving to remove fixture from wall. Individual wireway panelscan be easily removed for direct access to problem panels.CLUSTER SWITCHING: Individual rocker control switchesare a STANDARD feature and are centrally located at thebottom of the fixture, configured in the same layout as theviewing panels they control.OPTIONAL FEATURES:FILM ACTIVATED 3 POSITION ROCKER SWITCH:Provides for manual ON/OFF and film activated mode whichactivates the viewing area when a film is inserted into thefilm grip.MASTER SWITCH: Provided master ON/OFF control ofthe entire fixture.HOSPITAL GRADE PLUG: Heavy duty plug specified incertain municipalities.SURFACE MOUNT HARDWIRING: Single electrical powerexit location on the rear of fixture allows for surfacemounted fixtures to be directly wired to the wall.DIAGNOSTIC VIEWING CENTER ANGULATION AND CORNERMOUNTING: Angled mounting: top tier vertical and bottomtier angled at 20º maintaining centralized Cluster Switchinglocated at bottom center of fixture which controls top andbottom tiers. (See DVC information on previous page.)Corner Mounting: creates an effective solution to awkwardcorner space. (See DVC information on previous page.)MAXANT Technologies, Inc. 7540 Caldwell Avenue Niles, IL 60714Toll Free: (800) 307-4190 Phone: (847) 588-2280 Fax: (847) 588-1920

TECHLINE FEATURES COMPARISON CHARTTECHLINE200 SERIESTECHLINE300 SERIESTECHLINE400 SERIESTR-202Cluster STD STD STDSwitchingMinimal 1.8” STD STD STDSeparationRoller 1.8”Gravity STD STD STDGripContinuousBottom STD STD STDFilm LedgeU. L. Listed STD STD STDCSAApproved STD STD STDEasyServicing STD STD STDDesignFilmActivated OPT OPT OPTSwitchingMaster OPT OPT OPTSwitchingDual N/A OPT OPTBrightnessDiagnosticViewing OPT OPT OPTCenterHospitalGrade OPT OPT OPTPlugSurfaceMount OPT OPT OPTHardware220V. 50Hz OPT N/A OPTBallastSTD = StandardOPT = OptionalN/A = Not AvailableTS-403TS-304FSLO14.01