GBC Pro-Tech Parts Manual

GBC Pro-TechParts Manual© April 1999 GBC Pro-TechDo not duplicate withoutwritten permission.GBC Pro - Tech4151 Anderson RoadDeForest, WI 53532Revision : A Ph: ( 608 ) 246 - 8844Part number : 930 - 029Fx: ( 608 ) 246 - 8645

Read Me File . . .The information in this publication is provided for reference and is believed to beaccurate and complete. GBC Pro - Tech is not liable for errors in this publiction or forincidental or consequential damage in connection with the furnishing or use of the informationin this publication, including, but not limited to, any implied warranty of fitnessor merchantability for any particular use.GBC Pro - Tech reserves the right to make changes to this publication and to theproducts described in it without notice. All specifications and information concerningproducts are subject to change without notice.Reference in this publication to information or products protected by copyright orpatent does not convey any license under the rights of GBC Pro - Tech or others. GBCPro - Tech assumes no liabilty arising from infringements of patents or any other rightsof third parties.This manual is copyrighted © 1999 by GBC Pro - Tech. All rights reserved. Theinformation contained in this manual is proprietary and may not be reproduced, stored,transmitted, or transferred, in whole or in part, in any form without the prior and expresswritten permission of GBC Pro - Tech.In the electronic version of this publication, the ( ) red boxes indicate ahyper link with its exploded view drawing. The hand will turn to a pointer finger identifyingthe hyperlinked area. In the table of contents section, you will not see the box.Click on the page number to goto the specific page. To return from a linked page, rightclick on the mouse and select ( Go Back ).The symbol, ( CNO ), means you can not order this part number. The part numberis used for the sole purpose of a drawing reference number only. To help you obtainyour part needed as quickly as possible, please order the single item required. All partnumbers that begin with a 001 - ??? are assembly numbers and take longer to ship sincethey must be assembled prior to shipping. This can cuase a delay of two or more days.If you find an error within this publication or would like to make a suggestion,please utilize the correspondence sheet following this read me file and fax it to the numberprovided. Your comments and help will ensure up to date information. Thank you.Acknoledgements ;Sean Flood - Technical Service Department, Technical writerBrian terry - Engineering Department, AutoCad SpecialistNathan Glowaty - Production Department, Final Assembly

Fax CorrespondenceFax number : ( 608 ) 246 - 8645 Date :To :Sean Flood @ GBC Pro - Tech4151 Anderson RoadDeForest, WI 53532From :Company :Address :Phone number : ( ) Fax number : ( )Re : GBC Pro - Tech Parts Manual ( Part number 930 - 029 )What section ? What Page # ?What needs correcting ?Additional comments:

Linked to Table of ContentsFalcon 36 ( 000 - 002 )Falcon 60 ( 000 - 056 )Falcon 60 + ( 000 - 076 )Dye Sub 60 ( 000 - 052 )Orca I SAE ( 000 - 036 )Orca I SP ( 000 - 045 )Orca II ( 000 - 001 )Orca III SAE ( 000 - 012 )Orca IV ( 000 - 060 )Orca 80 ( 000 - 026 )Universal Parts

GBC Pro - Tech Parts ManualTable of ContentsSection 1 : Falcon 36 ( 000 - 002 )1 - 1: Cover page with available options1 - 2: Top View1 - 3: Front and rear views1 - 4: Control side view1 - 5: 001 - 037 Front control panel ( CNO ) Rear switch1 - 6: 001 - 039 Electrical panel assembly1 - 7: Drive side view1 - 8: 001 - 027 Idler sprocket assembly1 - 9: 001 - 032 Main roll assembly ( CNO )1 - 10: 001 - 033 Pull roll assembly ( CNO )1 - 11: 001 - 034 Lift mechanism assembly ( CNO )1 - 12: 001 - 035 Drive assembly ( CNO )1 - 13: 001 - 036 Idler assembly, web tension1 - 14: 001 - 040 Bridge assembly ( CNO )1 - 15: 001 - 042 Cabinet assembly ( CNO )1 - 16: 001 - 043 Stand assembly1 - 17: 001 - 044 Output slitter assembly1 - 18: 001 - 045 Rewind assembly ( CNO )1 - 19: 001 - 067 Vacuum table assembly1 - 20: 001 - 112 Arm assembly, pull roll1 - 21: 001 - 127 Power cable assembly, vacuum table1 - 22: 001 - 131 Knob assembly, unwind brake1 - 23: 001 - 133 Temperature controller assembly, Fahrenheit1 - 24: 001 - 135 Slitter assembly, output1 - 25: 001 - 137 Accessory pack assembly1 - 26: 001 - 172 Plug assembly, power cord, vacuum table1 - 27: 001 - 174 Infeed table assembly1 - 28: 001 - 177 Finished product rewind assembly1 - 29: 001 - 180 Torque limiter assembly1 - 30: 001 - 232 Wire duct set assembly1 - 31: 001 - 237 Brake assembly, rewind1 - 32: 001 - 260 Safety label kit assembly1 - 33: 001 - 310 Idler assembly, table1 - 34: 001 - 311 Table idler assembly1 - 35: 001 - 321 Paper unwind assembly1 - 36: 001 - 332 Knob assembly, clamp, unwind arm1 - 37: 001 - 335 Upper unwind assembly ( CNO )GBC Pro - Tech April 1999Page I

GBC Pro - Tech Parts ManualTable of Contents1 - 38: 001 - 336 Lower unwind assembly ( CNO )1 - 39: 001 - 411 Lift assembly, control side ( CNO )1 - 40: 001 - 412 Rewind drive assembly ( CNO )1 - 41: 001 - 417 Lift assembly, drive side ( CNO )1 - 42: 001 - 526 Large castor assembly, 39” nip heightSection 2 : Falcon 60 ( 000 - 056 )2 - 1: Cover page with available options2 - 2: Side cabinets and covers2 - 3: Front and rear views2 - 4: Control side view2 - 5: 001 - 444 Electrical panel assembly2 - 6: 001 - 429 Front control panel ( CNO ) Rear switch2 - 7: Drive side view2 - 8: Bridge and inside parts view2 - 9: 001 - 158 Upper unwind brake assembly2 - 10: 001 - 226 Idler assembly, output tension, chrome2 - 11: 001 - 342 M.O.V. assembly2 - 12: 001 - 356 Sensor assembly, force guage2 - 13: 001 - 374 PCB assembly, force guage2 - 14: 001 - 394 Idler assembly, web tension, powder coated2 - 15: 001 - 396 Lower unwind brake assembly2 - 16: 001 - 428 Adjustable chain tensioner assembly2 - 17: 001 - 432 Rewind drive assembly ( CNO )2 - 18: 001 - 435 Force guage sensor assembly2 - 19: 001 - 437 Magnet assembly, force guage2 - 20: 001 - 439 Rewind brake assembly2 - 21: 001 - 447 PCB assembly, electrical panel2 - 22: 001 - 452 Accessory pack assembly2 - 23: 001 - 463 TS 3 assembly2 - 24: 001 - 483 Wire duct set assembly2 - 25: 001 - 510 Core chuck assembly2 - 26: 001 - 517 Self tensioner assembly2 - 27: 005 - 028 Heater tensioning kit assembly2 - 28: 056 - 03 Main roll lift assembly ( CNO )Section 3 : Falcon 60 + ( 000 - 076 )3 - 1: Cover page with available optionsGBC Pro - Tech April 1999Page II

GBC Pro - Tech Parts ManualTable of Contents3 - 2: Side cabinets and covers3 - 3: Front and rear views3 - 4: Control side view3 - 5: 001 - 555 Electrical panel assembly3 - 6: 001 - 513 Front control panel ( CNO ) Rear switch3 - 7: Drive side view3 - 8: Bridge and inside parts view3 - 9: 001 - 158 Upper unwind brake assembly3 - 10: 001 - 342 M.O.V. assembly3 - 11: 001 - 374 PCB assembly, force guage3 - 12: 001 - 394 Idler assembly, web tension, powder coated3 - 13: 001 - 396 Lower unwind brake assembly3 - 14: 001 - 437 Magnet assembly, force guage3 - 15: 001 - 439 Rewind brake assembly3 - 16: 001 - 483 Wire duct set assembly3 - 17: 001 - 504 Sensor assembly, force guage3 - 18: 001 - 505 Force guage sensor assembly3 - 19: 001 - 509 Terminal strip assembly3 - 20: 001 - 510 Core chuck assembly3 - 21: 001 - 512 TS 3 Assembly3 - 22: 001 - 551 Accessory pack assembly3 - 23: 001 - 552 Pull roll lift assembly, drive side ( CNO )3 - 24: 001 - 553 Pull roll lift assembly, control side ( CNO )3 - 25: 001 - 556 Bridge assembly, fans ( CNO )3 - 26: 005 - 028 Heater tensioning kit assembly3 - 27: 076 - 01 Rewind drive assembly ( CNO )3 - 28: 076 - 03 Main roll lift assembly ( CNO )Section 4 : Dye Sub 60 ( 000 - 052 )4 - 1: Cover page with available options4 - 2: Side cabinets and covers4 - 3: Front and rear views4 - 4: Control side view4 - 5: 001 - 485 Electrical panel assembly4 - 6: 001 - 421 Front control panel ( CNO ) Rear switch4 - 7: Drive side view4 - 8: Bridge and inside parts view4 - 9: 001 - 173 Power cord assembly, main powerGBC Pro - Tech April 1999Page III

GBC Pro - Tech Parts ManualTable of Contents4 - 10: 001 - 342 M.O.V. assembly4 - 11: 001 - 374 PCB assembly, force guage4 - 12: 001 - 393 Idler assembly, pivot idlers4 - 13: 001 - 394 Idler assembly, web tension, powder coated4 - 14: 001 - 396 Lower unwind brake assembly4 - 15: 001 - 397 Pivot idler assembly, web lift4 - 16: 001 - 428 Adjustable chain tensioner assembly4 - 17: 001 - 432 Rewind drive assembly ( CNO )4 - 18: 001 - 437 Magnet assembly, force guage4 - 19: 001 - 439 Rewind brake assembly4 - 20: 001 - 447 PCB assembly, electrical panel4 - 21: 001 - 451 Accessory pack assembly4 - 22: 001 - 457 Core chuck assembly4 - 23: 001 - 463 Terminal strip assembly4 - 24: 001 - 504 Sensor assembly, force guage4 - 25: 001 - 505 Force guage sensor assembly4 - 26: 005 - 024 Thermocouple spring kit assembly4 - 27: 005 - 041 Positive rewind drive assembly4 - 28: 005 - 043 Heater tensioning kit with heater assembly4 - 29: 052 - 03 Main roll lift assembly ( CNO )Section 5 : Orca I SAE ( 000 - 036 )5 - 1: Cover page with available options5 - 2: Side cabinets and covers5 - 3: Front and rear views5 - 4: Control side view - components5 - 5: Control side view - hardware5 - 6: 001 - 208 Electrical panel5 - 7: 001 - 201 Front control panel 001 - 202 Rear control panel5 - 8: Drive side view - components5 - 9: Drive side view - hardware5 - 10: Bridge and inside parts view5 - 11: 001 - 124 Core chuck assembly5 - 12: 001 - 158 Unwind brake assembly5 - 13: 001 - 181 Rewind brake assembly5 - 14: 001 - 184 Self tensioning idler assembly5 - 15: 001 - 185 Rewind drive assembly5 - 16: 001 - 187 Main roll bearing block assemblyGBC Pro - Tech April 1999Page IV

GBC Pro - Tech Parts ManualTable of Contents5 - 17: 001 - 191 Output chill idler assembly5 - 18: 001 - 194 Main roll Assembly ( CNO )5 - 19: 001 - 195 Main roll cylinder assembly, drive side5 - 20: 001 - 196 Pull roll assembly ( CNO )5 - 21: 001 - 197 Pull roll cylinder assembly, drive side5 - 22: 001 - 205 Air solenoid assembly, main roll5 - 23: 001 - 206 Main roll cylinder assembly, control side5 - 24: 001 - 207 Pull roll cylinder assembly, control side5 - 25: 001 - 210 Air filter assembly5 - 26: 001 - 217 Handle assembly, cam, table idler5 - 27: 001 - 218 Idler assembly, table idler5 - 28: 001 - 233 Din rail set assembly5 - 29: 001 - 249 Main roll shim disk assembly, drive side5 - 30: 001 - 250 Main roll shim disk assembly, control side5 - 31: 001 - 251 Pull roll shim disk assembly, drive side5 - 32: 001 - 252 Pull roll shim disk assembly, control side5 - 33: 001 - 271 Accessory pack assembly5 - 34: 001 - 289 Sprocket assembly, drive5 - 35: 001 - 290 Adjustable chain tensioner assmbly5 - 36: 001 - 294 Table idler assembly5 - 37: 001 - 295 Frame assembly, infeed table5 - 38: 001 - 296 Idler assembly, slitter5 - 39: 001 - 297 Infeed table assembly5 - 40: 001 - 298 Slitter idler assembly5 - 41: 001 - 299 Infeed slitter assembly5 - 42: 001 - 314 Knob assembly, infeed slitter5 - 43: 001 - 329 Air solenoid assembly, pull roll5 - 44: 001 - 338 T.V.S. assembly5 - 45: 001 - 345 Outfeed table assembly5 - 46: 005 - 028 Heater tensioning kit assembly5 - 47: 180 - 150 Wire duct set assemblySection 6 : Orca I Scotch Print ( 000 - 045 )6 - 1: Cover page with available options6 - 2: Side cabinets and covers6 - 3: Front and rear views6 - 4: Control side view - components6 - 5: Control side view - hardwareGBC Pro - Tech April 1999Page V

GBC Pro - Tech Parts ManualTable of Contents6 - 6: 001 - 208 Electrical panel assembly6 - 7: Front control panel 001 - 202 Rear control panel ( CNO )6 - 8: Drive side view - components6 - 9: Drive side view - hardware6 - 10: Bridge and inside parts view6 - 11: 001 - 122 Outfeed slitter assembly6 - 12: 001 - 158 Unwind brake assembly6 - 13: 001 - 181 Rewind brake assembly6 - 14: 001 - 184 Self tensioning idler assembly6 - 15: 001 - 185 Rewind drive assembly6 - 16: 001 - 187 Main roll bearing block assembly6 - 17: 001 - 195 Main roll cylinder assembly, drive side6 - 18: 001 - 196 Pull roll assembly ( CNO )6 - 19: 001 - 197 Pull roll cylinder assembly, drive side6 - 20: 001 - 205 Air solenoid assembly, main roll6 - 21: 001 - 206 Main roll cylinder assembly, control side6 - 22: 001 - 207 Pull roll cylinder assembly, control side6 - 23: 001 - 210 Air filter assembly6 - 24: 001 - 217 Handle assembly, cam, table idler6 - 25: 001 - 218 Idler assembly, table idler6 - 26: 001 - 233 Din rail set assembly6 - 27: 001 - 249 Main roll shim disk assembly, drive side6 - 28: 001 - 250 Main roll shim disk assembly, control side6 - 29: 001 - 251 Pull roll shim disk assembly, drive side6 - 30: 001 - 252 Pull roll shim disk assembly, control side6 - 31: 001 - 289 Sprocket assembly, drive6 - 32: 001 - 290 Adjustable chain tensioner assmbly6 - 33: 001 - 294 Table idler assembly6 - 34: 001 - 295 Frame assembly, infeed table6 - 35: 001 - 296 Idler assembly, slitter6 - 36: 001 - 297 Infeed table assembly6 - 37: 001 - 298 Slitter idler assembly6 - 38: 001 - 299 Infeed slitter assembly6 - 39: 001 - 314 Knob assembly, infeed slitter6 - 40: 001 - 329 Air solenoid assembly, pull roll6 - 41: 001 - 338 T.V.S. assembly6 - 42: 001 - 345 Outfeed table assembly6 - 43: 001 - 349 Outfeed idler assemblyGBC Pro - Tech April 1999Page VI

GBC Pro - Tech Parts ManualTable of Contents6 - 44: 001 - 373 Air booster assembly6 - 45: 001 - 382 Lever booster assembly6 - 46: 001 - 482 Saddle assembly, unwind, paper6 - 47: 005 - 028 Heater tensioning kit assembly6 - 48: 180 - 150 Wire duct set assemblySection 7: Orca II ( 000 - 001 )7 - 1: Cover page with available options7 - 2: Side cabinets7 - 3: Front view7 - 4: Top view7 - 5: Control side view7 - 6: 001 - 094 Electrical panel assembly7 - 7: 001 - 090 Front control panel 001 - 068 Rear control panel7 - 8: Drive side view7 - 9: 001 - 001 Unwind assembly ( CNO )7 - 10: 001 - 002 Rewind assembly ( CNO )7 - 11: 001 - 005 Idler assembly, fixed7 - 12: 001 - 006 Idler assembly, table7 - 13: 001 - 007 Idler assembly, web tensioning, upper and lower7 - 14: 001 - 008 Idler sprocket assembly7 - 15: 001 - 047 Main cylinder assembly, drive side7 - 16: 001 - 050 Main cylinder assembly, control side7 - 17: 001 - 051 Main roll assembly, upper ( CNO )7 - 18: 001 - 053 Main roll assembly, lower ( CNO )7 - 19: 001 - 055 Pull roll assembly, upper ( CNO )7 - 20: 001 - 056 Pull roll assembly, lower ( CNO )7 - 21: 001 - 058 Pull roll cylinder assembly, drive side7 - 22: 001 - 059 Pull roll cylinder assembly, control side7 - 23: 001 - 061 Blower assembly, control side ( CNO )7 - 24: 001 - 062 Blower assembly, drive side ( CNO )7 - 25: 001 - 063 Encoder assembly, speed control7 - 26: 001 - 065 Regulator assembly, main air supply7 - 27: 001 - 066 Air solenoid valve assembly7 - 28: 001 - 069 Safety cable assembly ( CNO )7 - 29: 001 - 070 Infrared sensor assembly ( CNO )7 - 30: 001 - 071 PCB assembly, infrared sensors ( CNO )7 - 31: 001 - 083 Table assembly, smallGBC Pro - Tech April 1999Page VII

GBC Pro - Tech Parts ManualTable of Contents7 - 32: 001 - 084 Table assembly, large7 - 33: 001 - 085 Front table bracket, drive side7 - 34: 001 - 086 Front table bracket, control side7 - 35: 001 - 087 Rear table bracket, drive side7 - 36: 001 - 088 Rear table bracket, control side7 - 37: 001 - 089 Photo eye assembly ( CNO )7 - 38: 001 - 091 Frame assembly, machine ( CNO )7 - 39: 001 - 096 Self tensoner assembly7 - 40: 001 - 097 Motor assembly ( CNO )7 - 41: 001 - 099 Guage assembly, web tensioner7 - 42: 001 - 100 Unwind core assembly7 - 43: 001 - 101 Guard assembly, blower hose7 - 44: 001 - 102 Adjustable chain tensioner assembly7 - 45: 001 - 103 Filter / luber assembly7 - 46: 001 - 108 Switch assembly, web tensioning7 - 47: 001 - 110 Output slitter assembly7 - 48: 001 - 114 Unwind core end / brake assembly7 - 49: 001 - 122 Infeed slitter assembly7 - 50: 001 - 123 Idler assembly, slitter7 - 51: 001 - 226 Idler assembly, removableSection 8 : Orca III SAE ( 000 - 012 )8 - 1: Cover page with available options8 - 2: Side cabinets8 - 3: Front view8 - 4: Rear view8 - 5: Control side view - components8 - 6: Control side view - hardware8 - 7: 001 - 115 Electrical assembly8 - 8: 001 - 117 Front control panel 001 - 121 Rear control panel8 - 9: Drive side view8 - 10: 001 - 005 Idler assembly, fixed8 - 11: 001 - 006 Idler assembly, table8 - 12: 001 - 058 Pull roll cylinder assembly, drive side8 - 13: 001 - 059 Pull roll cylinder assembly, control side8 - 14: 001 - 083 Table assembly, small8 - 15: 001 - 084 Table assembly, large8 - 16: 001 - 085 Front table bracket assembly, drive sideGBC Pro - Tech April 1999Page VIII

GBC Pro - Tech Parts ManualTable of Contents8 - 17: 001 - 086 Front table bracket assembly, control side8 - 18: 001 - 087 Rear table bracket assembly, drive side8 - 19: 001 - 088 Rear table bracket assembly, control side8 - 20: 001 - 096 Self tensioner assembly8 - 21: 001 - 100 Unwind core end assembly8 - 22: 001 - 102 Adjustable chain tensioner assembly, primary chain8 - 23: 001 - 109 Outfeed slitter assembly, hooked blade8 - 24: 001 - 114 Unwind core end / brake assembly8 - 25: 001 - 122 infeed / oufeed slitter assembly8 - 26: 001 - 123 Idler assembly, slitter8 - 27: 001 - 160 Serial plate assembly, generic8 - 28: 001 - 164 Shield assembly8 - 29: 001 - 165 Shield stopper assembly, drive side8 - 30: 001 - 166 Shield stopper assembly, control side8 - 31: 001 - 170 Accessory pack assembly8 - 32: 001 - 181 Rewind brake assembly ( CNO )8 - 33: 001 - 189 Switch assembly, cooling fans8 - 34: 001 - 225 Noise filter assembly8 - 35: 001 - 226 Idler assembly, removable8 - 36: 001 - 231 Wire duct set assembly8 - 37: 001 - 233 Din rail set assembly8 - 38: 001 - 242 Adjustable chain tensioner assembly, secondary chain8 - 39: 001 - 259 Safety label set assembly8 - 40: 001 - 285 Over-temp protection assembly ( CNO )8 - 41: 001 - 304 Shaft assembly, pull roll cylinder, control side8 - 42: 001 - 326 Rewind drive assembly ( CNO )8 - 43: 001 - 342 M.O.V. assembly8 - 44: 005 - 036 Heater tensioning kit assemblySection 9 : Orca IV Industrial ( 000 - 060 )9 - 1: Cover page with available options9 - 2: Side cabinets and covers9 - 3: Front and rear views9 - 4: Control side view - components9 - 5: Control side view - hardwrae9 - 6: 001 - 458 Electrical panel9 - 7: 001 - 436 Front control panel 001 - 438 Rear control panel9 - 8: 001 - 440 Front brake panel 001 - 442 Rear brake panelGBC Pro - Tech April 1999Page IX

GBC Pro - Tech Parts ManualTable of Contents9 - 9: Drive side view - components9 - 10: Drive side view - hardware9 - 11: Inside parts view9 - 12: 060 - 08 Main roll lift assembly ( CNO )9 - 13: 060 - 09 Air filter assembly ( CNO )9 - 14: 060 - 10 Cooling idler assembly ( CNO )9 - 15: 060 - 11 Motor sprocket assembly ( CNO )9 - 16: 060 - 12 Idler sprocket assembly ( CNO )9 - 17: 060 - 13 Idler assembly, upper drive sprocket ( CNO )9 - 18: 060 - 14 Chain tension idler assembly ( CNO )9 - 19: 060 - 15 Clutch rewind assembly, 20 T ( CNO )9 - 20: 060 - 16 Self tensioner assembly, 1/2” ( CNO )9 - 21: 060 - 17 Self tensioner assembly, 1-15/16” ( CNO )9 - 22: 060 - 18 Straight fitting airline strip assembly ( CNO )9 - 23: 060 - 19 Locking pin assembly ( CNO )9 - 24: 060 - 20 Elbow fitting airline strip assembly ( CNO )9 - 25: 060 - 21 Pull roll lift assembly ( CNO )9 - 26: 060 - 22 Clutch rewind assembly, 18 T ( CNO )9 - 27: 001 - 005 Idler assembly, fixed9 - 28: 001 - 122 Infeed slitter assembly9 - 29: 001 - 123 Idler assembly, slitter9 - 30: 001 - 226 Idler assembly, removable9 - 31: 001 - 305 Standoff assembly, removable idler9 - 32: 001 - 342 M.O.V. assembly9 - 33: 001 - 420 Valve control assembly, main roll and pull roll9 - 34: 001 - 459 Motor controller assembly9 - 35: 001 - 464 Terminal block, input to PLC9 - 36: 001 - 465 Terminal block, output to PLC9 - 37: 001 - 466 Terminal block, sensors9 - 38: 001 - 468 Terminal block, main power9 - 39: 001 - 474 Terminal block, fans, control side9 - 40: 001 - 475 Terminal block, fans, drive side9 - 41: 001 - 480 Accessory pack assembly9 - 42: 001 - 501 Encoder assemblySection 10 : Orca 80 ( 000 - 026 )WILL BE ADDED AT A LATER DATEUniversal items parts list ( wire, connectors, etc. )GBC Pro - Tech April 1999Page X

GBC Pro - Tech Parts ManualFalcon 36 SAEIllustrated Parts Diagrams( 000 - 002 )Available Options ;001 - 067 ( Vacuum Table )001 - 321 ( Paper Unwind )001 - 177 ( Product Rewind )001 - 044 ( Outfeed Slitters )001 - 174 ( Outfeed Table )001 - 526 ( 39” Nip Height Castors )© GBC Pro - Tech April 1999 Page 1 - 1

© GBC Pro - Tech April 1999 Page 1 - 2520 - 002Cover, Cabinet, Drive001 - 040Assembly, bridge440 - 110Decals, E-Stop001 - 036Assembly, idler001 - 412Assembly, rewind drive001 - 035Assembly, Cabinet, Drive520 - 000Cabinet, Drive side690 - 001Main rolls760 - 001Table, Infeed690 - 002Pull roll, Upper672 - 012Pressure Plate690 - 003Pull roll, Lower240 - 120Thermo couples001 - 034Assembly, lift, main001 - 032Assembly, Main Rolls001 - 033Assembly, Pull Rolls001 - 042Assembly, Cabinet, Control520 - 001Cabinet, Control side520 - 002Cover, Cabinet, Control214 - 313Push button, E-Stop465 - 005Hand wheelGBC Pro - Tech Parts ManualF 36 : Top View

GBC Pro - Tech Parts ManualF 36 : Front / Rear viewsFront View530 - 007Core stopper860 - 005Rewind tube001 - 045Assembly, rewind001 - 237Assembly, brake, rewind001 - 335Assembly, upper unwind710 - 009Shaft, rewind001 - 037Assembly, front control425 - 000Motor001 - 336Assembly, lower unwind001 - 043Assembly, stand470 - 002Castor wheel182 - 101Fan, muffin, 4"690 - 001Main rollsRear View001 - 131Assembly, knob, brake690 - 002Pull roll, upper620 - 000Idlers, webbing214 - 313Push button, E-Stop001 - 332Assembly, knob, unwind214 - 313Push button, E-Stop520 - 001Cabinet, control Side214 - 400Knob, switch, on/off214 - 420Switch, power, on/off520 - 000Cabinet, drive side175 - 180Strain relief, 1/2"175 - 190Strain relief, 3/4"425 - 000Motor214 - 263Foot switch*001 - 260Safety label kit001 - 173Assembly, power cord690 - 003Pull roll, lower470 - 002Castor, wheel001 - 137Assembly, Accessory pack© GBC Pro - Tech April 1999 Page 1 - 3

GBC Pro - Tech Parts ManualF 36 : Control Side001 - 411Assembly, lift, control672 - 000Plate, bearing, main roll001 - 039Assembly, electrical panel001 - 112Assembly, pull roll arm510 - 002Bracket, heater, upper510 - 029Bracket, photo-eye250 - 100Photo-eye214 - 420Switch, power, on/off214 - 400Knob, switch, on/off001 - 172Assembly, plug, vacuum table175 - 190Strain relief, 3/4"189 - 000Heaters001 - 232Panduit set510 - 009Bracket, heater, lower© GBC Pro - Tech April 1999 Page 1 - 4

GBC Pro - Tech Parts ManualF 36 : 001 - 037 Front & Rear Panels ( CNO )220 - 161Rotary potentiometerFront Control Panel465 - 150Knob, speedMOTORFWD9AUTO214 - 350Switch, fwd/rev361215214 - 370Switch, auto/stopREV018SPEEDSTOP1FANSPOWER450 - 001Overlay, front panel214 - 380Switch, 2 pole, on/off0HEATERS194 - 000Indicator, green, 220vac214 - 360Switch, 2 pos, on/off10TOPOUT1001257515017550DPROTECHF200 HI225250275300001- LO133001 - 133Assembly, temp control o F214 - 360Switch, 2 pos, on/off10BOTTOMOUT1001257515017550DPROTECHF200 HI225250275300001- LO133001 - 133Assembly, temp control o FPRO-TECH Engineering Madison,WI 608-246-8844Rear Control Panel214 - 370Switch, fwd/revMOTORAUTO450 - 061Overlay, rear panelSTOP© GBC Pro - Tech April 1999 Page 1 - 5

MNA-© GBC Pro - Tech April 1999 Page 1 - 6DCBA4PROPRIETARGBC PRO-TECH CLAIMS PROPRIETARY YRIGHTS TOMATERIAL DISCLOSED ON THIS THEDRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCEONLY AND SHALL NOT BEREPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-4TECH20 19 4 3 2C17109 8214 1214 154 12814 11713 1069 54 12814 11713 1069 514 11713 1069 5A1A232212019181716151413121109876543333222228L2LGR 1DP3 P2 P1 I1 F+ F- L1 L2 A+32132132114 1512 O3U IT NP PU U1 4T T2 O3U IT NP PU U1 T T 42416 186722231223 11311BCCREQ'D1 PNL,ELEC 670-000 11 CNTRL,MTR /KBLC-240DS 220-160 21 BRD,BARR /KBIC-9884 220-110 31 REST,1/8 /KBIC-9890 220-130 41 TB,END /SS-221-01 217-170 526 TB,40A,GRAY /VU4-4 217-120 67 TB,40A,BLUE /VU4-4 217-270 73 BASE,RLY,14PIN /PY14A-E 207-110 83 RLY,14 PIN /MY4N/240 207-125 91 DIN RAIL, 14" 217-205 102 RLY,SST,40A,240V /A2440 207-150 112 BHCS,10-32 X .38 - 124 SHCS,8-32 X .38 - 134 SHCS,10-32 X .5 - 144 WASH,LOCK,10 - 156 BAR,JMP /SS-205-01 217-190 16NUMBERS 176 CVR,BAR,JMP,V4/V5 217-180 181 FUSE,2.5 / - 191 FUSE - 201 CB,PWR /S272K32 186-510 211 DUCT WITH COVER, 18" 180-155 221 TB,40A,GRN /VUPE 4-4 217-140 231 GROMMET,RUBBER,.31 175-000 2425779607159404839410-5- SRA10-14- SRA5-31- SCBAREVISIODESCRIPTION4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-8645SHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINISN.TO HX/ P 1/TITLEBEX 64:12X P5. .050X. P-X .020X.X P ANGLE DATE 11-30-X .010SP : 93X.XX PRELEAS1DX .005ENO.23DRAWN SCALEBY::RAS 1:2GBC Pro - Tech Parts ManualPART NO.ITEMR PRO-TECHASSY, PANEL,ELECSIZE:CDwg:001-039DCBAF 36 : 001 - 039 Electrical Panel

GBC Pro - Tech Parts ManualF 36 : Drive side440 - 125Sprocket, idler001 - 417Assembly, lift, drive435 - 260Sprocket, rewind435 - 260Sprocket, rewind drive001 - 027Assembly, idlers400 - 120Chain510 - 003Bracket, heater, upper510 - 057Bracket, reflector001 - 180Assembly,torque limiter435 - 002Sprocket, main roll drive217 - 043Phoenix contact510 - 004Bracket, heater, lower435 - 175Sprocket, motor189 - 000Heaters040 - 007Tapered bushing© GBC Pro - Tech April 1999 Page 1 - 7

© GBC Pro - Tech April 1999 Page 1 - 88 7 6 5REQ'D DESCRIPTIONPART NO. ITEM1 SHFT,IDL,.5 /S01 440-110 11 WASH,THRST,.5,.06 /TRB-815 032-140 21 SPRKT,35,13T,.5 /35BS13F 440-125 31 BASE,IDL,3/8-16 /GS 440-135 42 SHCS,1/4-20 X .875 - 52 WASH,FLAT,1/4 - 62 WASH,LOCK,1/4 - 72 NUT,HEX,1/4-20 - 810794RA10-10- S94AREVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXX3This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCETOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:Dwg:242117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY, SPRKT, IDL, 13T, BASEPTN-368-6-93 RAS A1 001-027GBC Pro - Tech Parts ManualF 36 : 001 - 027 Idler Sprocket

N© GBC Pro - Tech April 1999 Page 1 - 9DCBAH13344891664 58 91432 ROLL,MAIN,4.62X42 690-001 14 BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8 040-009 22 PLT,BRG,ROLL,MAIN 672-000 312 SHCS,1/4-20 X .5 - 412 WASH,LOCK,1/4 - 51 BRKT,MTG,HTR,LWR,CLP 510-009 61 BRKT,MTG,HTR 510-004 712 SHCS,10-32 X .375 - 812 WASH,LOCK,10 - 92 HTR, 189-000 101 SPRKT,35,54T,TPRD /35SH54 435-002 111 BUSH,TPRD,QD /SH-1.25 040-007 122 BRKT,MTG,SHLD HEAT 510-022 131 SHLD,HEAT,ROLL,MAIN 585-000 141 TC,J-TYPE THERMOCOUPLE 240-120 152 SCRW,SHLDR,.25X.38,10-24/26301 - 164 COL,SPLT,1.25 /CL20F 290-540 174 SPRING,WAVE /9714K69 089-100 182 WASH,THRST /TRA-2031 032-410 1926CENTER SPRING OVER2 SCRW,SHLD,.5,.75,3/8-16 - 2020 THERMOCOUPLE JUNCTION2 BHCS,#10-32 X .38 - 2112 11173142215242221 2623 24 252POSITION FORBESTSPRING LOCATIONDETAIL:THERMOCOUPLE MOUNTINGSCALE X22 1H21252315 POSITION AND/OR BEND TOACHIEVE FLAT CONTACT WITHROLL AT THERMOCOUPLEJUNCTION10H230492992D.G2-23- .AJ 9811/12/ H2942AJ 979/25/ HHGFGT 973-3- SHHHHH2676971140RA10-09- S05160470RA 956-10- SEDREQ'D18 19 18RA 945-25- SRA 943-8- SCB940331AREVISIO7SHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINISN.TO HX/ P 1/BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005DESCRIPTIONTITLE:-DATE:RELEASENO.4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-86459-9-931DRAWN SCALEBY::RAS 1:21PART NO.1 SUPPORT,THERMOCOUPLE 757-026 221 SPRING 089-021 231 BHSCS #6-32 x 1/4 - 241 FLAT WASHER, #6 - 252 EXT LOCK WASHER, #10 - 26R PRO-TECHASSY, ROLL,MAINSIZE:CDwg:ITEM001-032DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 032 Assembly, Main Roll ( CNO )

MNR© GBC Pro - Tech April 1999 Page 1 - 10DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C2394 6316221013REQ'DDESCRIPTIONPART NO. ITEM1 ROLL,PULL,LWR,2.5X42 690-003 21 SHFT,ROLL,PULL,LWR,.75,47.38 710-003 42 BUSH,BRNZ,FLNG,.75,1,.62 /FB1216-5 040-008 52 BUSH,KYLS 040-011 62 SCRW,SHDR,.5,.75,3/8-16 - 92 NUT,NYLOC,3/8-16 - 102 SCREW, SHLDR 1/2 X 1/2 - 122 RING,SNAP,.75 /5100-75 090-135 131 LMTR,TORQ,/TL250-2 001-180 141 KEY,3/16 X 1 - 151 ASSY,ROLL,PULL 001-413 161251514T3128H3034S25909-10-93BJ6-8-AJ 982/6/9810-17-96REVISIOEDCSHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINISN.TO HX/ P 1/BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005TITLE:-DATERELEAS :NO E.4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-86451ASSY,ROLL,PULLDRAWN SCALEBY::RAS 1/1PRO-TECHSIZE:CDwg:001-033DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 033 Assembly, Pull Roll ( CNO )

BJMN.:.R:::© GBC Pro - Tech April 1999 Page 1 - 11DCBA7PROPRIETARGBC PRO-TECH CLAIMS PROPRIETARY Y RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDMANUFACTURE OR FOR ANY FOR OTHER PURPOSE WITHOUTPERMISSION WRITTEN FROM GBC PRO-TECH152616C3 614 15 1628629 30193857 6 5 4 31148 10242373USECTION A-A37915 16171236AGGGFFFFFFREQ'D2DESCRIPTION262 11PART NO.2 GEAR,HELI,RH,16DP,24T,1.50,.75 /16HS24R 430-006 32 KEY, 3/16 X 1 - 62 WASH,THRT,.75,1,.12 /TB1220 032-002 78 SHSC 1/4-20 X .75 81 SHCS,1/4-20 X .625 - 98 WASH,LOCK,1/4 - 101 SHFT,CRNK,LIFT,ROLL,MAIN 710-000 111 HNDWHL,6 /82402066 465-005 124 WASHER, FLAT #10 148 SHCS,10-32 X .38 - 158 WASH,LOCK,10 - 161 BRKT,MTG,HTR 510-002 171 BRKT,MTG,HTR, W/ CLAMP 510-003 191 SW,PHEYE /E3F-R2Z1 250-100 231 BRKT,PHEYE,FALCON 510-029 244 SCRW,SHLD,.375,1.25,5/16-18 - 261 BRACKET,REFLECTOR,PHEYE 510-057 281 SHCS,5/16 X .5 - 291 WASHER,FLAT,5/16 - 301 ASSY,LIFTER,ROLL,MAIN 001-411 371 ASSY,LIFTER,ROLL,MAIN 001-417 38T6-8-97 3127GTS3-3-97 2676S10-29-96 2590REVISIOGFESHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOW AS TOL. FINISNTO HX/P 1/64BEXX125P .050X.P .020XX.XANGLEP .010XSPX.XXP .0051DXAPRO-TECHITEM4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532 Fax (608) 246-8645TITLE:ASSY,LFTR,ROLL,MAIN-DATEDRAWN SCALE SIZE Dwg8-23-93BY:RELEASRAS 1:2ENOD 001-034124513182021222527313233343536DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 034 Assembly, Lift Mechanism ( CNO )

N© GBC Pro - Tech April 1999 Page 1 - 12414E2893561213117110REQ'D DESCRIPTIONPART NO. ITEM1 MOTOR, 1/8 HP 425-000 11 CHAIN, 35 400-150 21 SPROCKET, 35, 20T, 5/8 BORE 435-175 31 CHAIN, LINK, MASTER 400-140 41 SCREW, SET, 1/4-20 X .375 - 54 WASHER, LOCK, STAR, 1/4 - 62 WASHER, BAR, 1/4 645-002 71 TERMINAL, BLOCK 217-043 81 NUT, NYLOCK, 10-32 - 93 ASSY, SPROCKET, IDLER 001-027 101 RELIEF, STRAIN, SMALL 175-180 114 SHCS, 1/4-20 X 1 - 124 NUT, HEX, 1/4-20 - 131 SHCS #4-40 X 3/4 - 14AJ2/18/ H3272BJ 996-8- T312898BJT5-13-98 3110RLM3-25-96 2528RAS2-23-94 0320REVISIOEDCBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDE2117 N. Stoughton Rd. Madison, WisconsinDIM. AS TOLSHOWFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H4685P 1/X/XBETITLE64:12 ASSY,DRIVE,STANDARPX.5.050FALCON- DPX.X.02036X.X P ANGLEDATEDRAWNDWG DwgX .010:BY:SCALE::SPX.XX P1D 2-16-94 RAS C4X .005Pro-Tech Engineering001-035GBC Pro - Tech Parts ManualF 36 : 001 - 035 Assembly, Drive ( CNO )

© GBC Pro - Tech April 1999 Page 1 - 1332REQ'D DESCRIPTIONPART NO. ITEM1 IDL,TEN 620-000 12 BUSH,BRNZ,FLNG,1,1.25,.75 /FB1620-6 040-016 22 RING,SNAP,1 /5100-100 090-140 31REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. AS2117 N. Stoughton Rd. Madison, Wisconsin 53704TOL.SHOWNFINISHPhone (608) 246-8844 Fax (608) 246-4685X/TO BE TITLEP 1/64X:X125P .050ASSY,IDL,TEN,BRK.X.P .020F-36XX.XANGLEDwgP .010DATE: DRAWN BY: DWG SCALE:X:SPX.XX1DP .0059-11-93 RAS C1XPro-Tech Engineering001-036GBC Pro - Tech Parts ManualF 36 : 001 - 036 Idler, Webbing

© GBC Pro - Tech April 1999 Page 1 - 14DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH10INSERT END OF PNEUMATIC TUBING INTO THIS HOLE 11FROM INSIDE BRIDGE CABINET. TO BE USED ASCONDUIT FOR THE THERMOCOUPLE LEAD4CEE32 7E38134122REQ'D62304910179506890411030094D.G2-24- .98J.S.6-14-RA9-27- SRA 944-22- SRA 941-28- SDESCRIPTIONEDCBAREVISIONESHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005#REF!FINISHTO BE125EANGLESP 1DTITLE:#REF!#REF!14151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645#REF!DATE: DRAWN BY: SCALE:RELEASE#REF! #REF!NO.1PART NO.1 CAB,BRDG,FALCON 520-004 11 BRKT,MTG,TC 510-018 26 FAN,MUFFIN 182-101 36 GUARD,FAN 182-011 412 SCRW,PAN,6-32 X 2 - 620 SHCS,10-32 X .5 - 720 WASH,LOCK,10 - 81 GROMMET 175-000 105 FT TUBING,PNEUMATIC,1/4 360-120 111 WIRE HARNESS,DAISY CHAIN 201-000 12R PRO-TECHSIZE:#REF!Dwg:ITEM#REF!DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 040 Bridge

QQQQTRTRQPRRMMMMQQQQQQMNR© GBC Pro - Tech April 1999 Page 1 - 15DCBAPROPRIETARREQ'DDESCRIPTIONPART NO. ITEMGBC PRO-TECH CLAIMS PROPRIETARY YRIGHTS TO1 CABINET,RIGHT 520-001 159MATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BE1 CABINET,LEFT 520-000 2REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FOR1 CABINET,COVER,RIGHT 520-003 3POSITON AND/OR BEND TO227MANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-C1 CABINET,COVER,LEFT 520-002 4ACHIEVE FLAT CONTACT WITHTECHROLL AT THERMOCOUPLE10 BHCS,#10-32 X .5 - 5JUNCTION1 TABLE,INFEED 760-001 61 ASSEMBLY,BRIDGE 001-040 71 ASSEMBLY, SAFETY LABEL 001-260 8CENTER SPRING OVER4 BRACKET,MOUNTING,TIEBAR 510-023 9THERMOCOUPLE JUNCTION12 SHCS,3/8-16 X .75 - 1014 WASHER,LOCK,3/8 - 11WIRE INSIDE BRIDGE581 SHAFT,IDLER,ENVELOPE 710-006 12ASSEMBLY4 SHCS, 3/8-16 X 1.0 - 13552 CONNECTOR,COMPRESSION,1/2 175-100 1416 1757561 CONDUIT,1/2 540-000 151 SWITCH,POWER,ON/OFF 214-420 164754 POSITON FOR BESTSPRING1 KNOB,SWITCH,POWER,ON/OFF 214-400 172 CONTACT BLOCK, E-STOP 214-314 18LOCATION2 SWITCH,PALM,EMERGENCY STOP 214-313 19DETAIL 1: THERMOCOUPLE MOUNTING2 DECAL,SWITCH,EMERGENCY STOP 450-110 20SCALE X81 SWITCH,FOOT 214-263 211 THERMOCOUPLE, OKJ30B13A 240-120 221 STRAIN RELIEF,1/2 175-180 232 TIE BAR, UNWIND 770-000 244 PLUG,HOLE,DOME,BLACK,3/8 175-501 253 5 313 PLUG,HOLE,DOME,1 175-510 261 LIGHT,INDICATOR,RED 194-001 27- - - 281 ASSEMBLY, CHASSIS WIRE DUCT SET 001-232 29- - - 301.69' GROMMET,RUBBER STRIP 175-002 31- - - 32- - - 33- - - 34- - - 351 SERIAL PLATE,GENERIC 450-015 362 SHSC,1/4-20 X .75 - 3750 5149- - - 3810 11 122 BUMPER,RUBBER,RECESSED 465-502 3961 ASSEMBLY,PLUG,POWER,VAC TABLE 001-172 402 RIVET,1/8 - 4118 19 209 10 11 132 SUPPORT,TABLE,INFEED,FALCON-36 757-008 4224Q- - - 432 WASHER,LOCK,3/8 - 4410 42 44 2 PLUG,HOLE,DOME,BLACK,5/8 175-503 4537 39- - - 46- - - 4727- - - 4824414 153312540 41SEE DETAIL1292623621 2323127304930302992294226762608BJ6-9- TD.G 982-23- .D.G 982-3- .AJ 9811/12/ HAJ 979/26/ HGT 973-3- S9711-22- S96REVISIORQ1 PLATE,PRESSURE,INFEED 672-012 492 STRIP %%C.25 X 1/4 (26300) - 5051- - - 52- - - 531 SUPPORT,THERMOCOUPLE 757-026 541 SPRING 089-021 551 BHCS #6-32 x 1/4 - 561 FLAT WASHER, #6 - 572 EXT LOCK WASHER, #10 - 582 BHCS 10-32 x 3/8 - 59PONMLSHEET 1OF1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINISN.TO HX/ P 1/BEX 6412X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005TITLE:DATERELEAS :NO E.4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-86454-18-941ASSEMBLY,CABINET-DRAWN SCALEBY::RAS 1:81PRO-TECHSIZE:CDwg:001-042DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 042 Assembly, Cabinet ( CNO )

M© GBC Pro - Tech April 1999 Page 1 - 16DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH14C4332REQ'DDESCRIPTIONPART NO. ITEM2 STAND,LEG 757-000 11 SUPPORT,STAND 757-011 44 CASTOR, SWIVEL, 20-30S-B2-HR-TB 470-002 512 BHCS,1/4-20 X .5 - 64 SHCS,1/2-13 X 1 - 74 WASHER,LOCK,1/2 - 88 WASHER, 1/2 EXTERNAL STAR - 94 NUT, HEX HEAVY, 1/2-13 - 102T312725779610609510-7- SBJ6-9-98RA7-31- SCBAREVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXSHEET 1 OFTOL.P 1/64P.050P.020P.010P.0056UNLESS OTHERWISE SPECIFIEDTOLERANCE1FINISHTO BE125ANGLESP1D7 8TITLE:DATE 2-16-94:RELEASE NO.519 104151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,STANDF-36DRAWN SCALEBY::RAS 1/8PRO-TECHRSIZE:CDwg:001-043DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 043 Stand

© GBC Pro - Tech April 1999 Page 1 - 17DCBA2444 563213.03 ADJUST AS NECESSARYFOR TIGHT FIT WITH SIDE FRAMEPLUNGER DETAIL2X SCALE32REQ'D DESCRIPTIONPART NO. ITEM1 BAR,SLITTER 740-002 12 PLUNGER,SPRING,STUBBY /LNK-3 098-000 22 BRACKET,MOUNTING,BAR,SLITTER 740-003 34 SHCS,10-32 X .5 - 44 WASHER,LOCK,#10 - 52 HOLDER,BLADE 001-135 62REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:1Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:10-21-93 RAS C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSY,SLITTER,FALCONF-361Dwg:001-044DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 044 Output Slitters

HHSR© GBC Pro - Tech April 1999 Page 1 - 18DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH2(REF 040-003)4C653318REQ'D1216 17DESCRIPTION2327130202590AJ3/2/AJ 991/23/98 M10-17-96REVISIONEDCSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:1PART NO.1 SHAFT,DRIVE,REWIND,FALCON 710-009 11 JOURNAL,SHAFT,DRIVE,REWIND,FALCON 710-010 21 SPRING,WAVE,COMPRESSION 089-105 51 BUSH,BRONZE,.75 X 1 X 1 /FB1216-8 040-010 61 CHUCK,CORE,REWIND 530-007 161 SCREW,SET,3/8-16 X .5 - 171 ASS'Y,BRAKE,REWIND 001-237 18E(REF 001-412)4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 12-17-93 DRAWN BY: SCALE:RELEASERAS 1/1NO.PRO-TECHASSY,REWIND,FALCONF-36SIZE:CDwg:ITEM001-045DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 045 Rewind

© GBC Pro - Tech April 1999 Page 1 - 19431028 91REQ'D DESCRIPTIONPART NO. ITEM1 TABLE,INFEED,VAC 760-003 12 FAN,MUFFIN,230 /3-15-3451 182-101 22 GUARD,FAN 182-011 38 SCREW,PAN,6-32 X 2 - 41 RELIEF,STRAIN,CABLE /1214 175-006 51 ASSEMBLY,CABLE,POWER,VAC TABLE 001-127 62 RELIEF,STRAIN,CABLE /1077 175-003 84 CABLE,18/2 270-109 92 SHIELD,DEFLECTOR,FAN 585-003 10REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0055FINISHTO BE125ANGLESP 1DTITLE:6 7Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSY,TBL,INFD,VAC,FALCON-36F-36DATE: DRAWN BY: DWG SCALE:2-15-94 RAS C4Dwg:001-067GBC Pro - Tech Parts ManualF 36 : 001 - 067 Vacuum Table

© GBC Pro - Tech April 1999 Page 1 - 2032REVISIONREQ'D DESCRIPTIONPART NO. ITEMDIM. ASSHOWNX/XX.X.XX.XXX.XXX1 BRACKET,MOUNTING,PULL ROLL,UPPER 510-010 11 BUSHING,BRONZ,FLANGE,.75,1,.625 040-008 21 BUSHING,BRONZ,FLANGE,.5,.75,.625 040-014 3This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCETOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP1DTITLE:1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASS'Y,ARM,PULL ROLLFALCON-36DATE: DRAWN BY: DWG SCALE:4-5-94 RAS A1Dwg:001-112GBC Pro - Tech Parts ManualF 36 : 001 - 112 Arm, Pull Roll

© GBC Pro - Tech April 1999 Page 1 - 211REQ'D DESCRIPTIONPART NO. ITEM- CABLE,POWER,18/3 270-110 11 PLUG,MALE 201-190 2U26RAS9-26-94 REVISION0672AAX/XX.X.XX.XXX.XXX2This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,CABLE,POWER,VAC TABLEFALCON 36DATE: DRAWN BY: DWG SCALE:6-10-94 RAS A1Dwg:001-127GBC Pro - Tech Parts ManualF 36 : 001 - 127 Power Cable, Vacuum Table

© GBC Pro - Tech April 1999 Page 1 - 22PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH1C32CAREQ'D DESCRIPTIONPART NO. ITEM1 KNOB,CLAMP,FEMALE,1/4-20 465-008 11 SET SCREW 1/4-20 X 2.5 CUP POINT 050-030 21 SPACER 720-001 3USE GREEN LOCKTITETO LOCK SCREW IN PLACEMS10-5-96 2577J.S.6-14-95 1014RAS9-26-94 0670REVISIONCBASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:6-23-944151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: DRAWN BY: SCALE:RELEASENO.RAS A1RPRO-TECHASSEMBLY,KNOB,CLAMP,BRAKEFALCON 36SIZE:Dwg:001-131GBC Pro - Tech Parts ManualF 36 : 001 - 131 Assembly, Knob, Brake

© GBC Pro - Tech April 1999 Page 1 - 23OUT1001257515050PROTECH2175DFREQ'D DESCRIPTIONPART NO. ITEM2001 CONTROLLER,TEMPERATURE 230-003 11 OVERLAY,50-300,%%DF 450-004 2HI225250275300LO001-133REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:1DATE: DRAWN BY: DWG SCALE:7-21-94 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEM,CONTROLLER,TEMP,%%DFDwg:001-133GBC Pro - Tech Parts ManualF 36 : 001 - 133 Temperature Controller, o F

R© GBC Pro - Tech April 1999 Page 1 - 2415 6REQ'D DESCRIPTIONPART NO. ITEM1 HOLDER,BLADE 740-001 11 NUT,T-SLOT,1/4-20 /3382 050-001 21 KNOB,KNURLED /DK-510 465-007 32 PIN,DOWEL,1/4 X .5 095-190 41 SCREW,THUMB,1/4-20 X .5 092-140 55 BLADE,RAZOR 475-002 61 SCREW,SET,1/4-20 X 1.75 /25337 050-014 7.074APRESS INTO PLACE AND GLUE WITH BLACK MAX3801.213 7A2NOTE:SEE 001-044 FOR REST OF SLITTER ASSEMBLY.GREEN LOCTITE TO ITEM 3A 3271 3/5/99 ADD NOTES & DIMENSION LOCATING PINSREV ECN BY DESCRIPTIONUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005AJHFINISHTO BE125ANGLESP 1D-TITLE:SLITTER ASSEMBLYFALCON 36DATE:RELEASENO.4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:SCALE:SIZE:Dwg:001 - 135GBC Pro - Tech Parts ManualF 36 : 001 - 135 Slitter Assembly

© GBC Pro - Tech April 1999 Page 1 - 25REQ'D DESCRIPTIONPART NO. ITEM2 TOWEL,WHITE 475-950 11 VIDEO 000-040 21 ZIPPY KNIFE 475-620 31 ALLEN WRENCH SET 475-230 44 1/4-20 x 2 SHCS FLR STK ITEM 52 FUSE, SB, 3AG, 3A 186-200 61 TAPE MEASURE 475-100 71 RUBBER CEMENT PICK-UP 930320 92 FUSE, SB, 3AG, 2.5A 186-220 101 BOX ACCESSORY 475-010 111 FALCON OPERATION MANUAL 930400 12AJH11/12/97 2993AJH11-5-97 2991REVISIONBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ACCESSORY KIT, FALCONDATE: DRAWN BY: DWG SCALE:1-29-96 RLM A1Dwg:001-1378GBC Pro - Tech Parts ManualF 36 : 001 - 137 Accessory Pack

© GBC Pro - Tech April 1999 Page 1 - 26L2NSOLDER GROUND WIRE HERECOVER WITH 1/4OD X 3/4 LGSHRINK TUBING4 3 TAG 251 4REQ'D DESCRIPTIONPART NO. ITEM1 WIRE,RED,22AWG,#F085 - 11 WIRE,GREEN/YELLOW,GROUND,#F082 - 21 WIRE,LT BLUE,22AWG,#F083 - 32 CONNECTOR,PUSH ON - 41 CONNECTOR,RECEPTACLE,FEMALE 201-185 55REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,PLUG,POWER,VAC TBLF-36DATE: DRAWN BY: DWG SCALE:9-27-94 RAS A1Dwg:001-172GBC Pro - Tech Parts ManualF 36 : 001 - 172 Plug, Power, Vacuum Table

© GBC Pro - Tech April 1999 Page 1 - 273REQ'D DESCRIPTIONPART NO. ITEM11 TABLE,INFEED 760-057 11 BRACKET,TABLE,REAR,LEFT 510-064 21 BRACKET,TABLE,REAR,RIGHT 510-062 34 SHCS,1/4-20 X .5 - 44 WASHER,LOCK,1/4 - 54 BHCS,1/4-20 X .5 - 65462983165AJ8/13/ HREVISIONAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:9-29-94 RAS c4Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY,TABLE,OUTFEED,OPTIONF - 36Dwg:001-174GBC Pro - Tech Parts ManualF 36 : 001 - 174 Infeed Table

R© GBC Pro - Tech April 1999 Page 1 - 28DCBAGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH642314PROPRIETARY4C33952REQ'DDESCRIPTIONPART NO. ITEM1 ASSEMBLY,REWIND,FALCON 001-045 11 ASSY,SPROCKET,IDLER 001-027 2101.25 CHAIN,35 400-120 31 CHAIN,LINK,MASTER 400-140 41 ASSY,SPROCKET,FALCON 001-412 51 LINK,CHAIN,1/2 400-130 61 BUSH.,BRONZE, FB1016-6 040-003 9230362638AJH2/6/98MS1-13-97REVISIONBASHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNTOL. FINISHTO BEX/X P 1/64125X. P .050X.XP .020X.XX P .010 ANGLESP 1DX.XXX P .005TITLE:14151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-864510-10-94DATE: DRAWN BY: SCALE:RELEASERAS 1/1NO.PRO-TECHASSY,REWIND,OPTIONALFALCON-36SIZE:CDwg:001-177DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 177 Finished Product Rewind

.© GBC Pro - Tech April 1999 Page 1 - 29PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC321BREQ'D DESCRIPTIONPART NO. ITEM1 TORQUE LIMITER 435-240 11 BUSHING,TORQUE LIMITER 040-120 21 SPROCKET,35,25T 435-245 31 BRASS TIP SET SCREW 10-24 X 1/4 050-024 44APPLY LUBRIPLATE DOW #44GREASE TO EACH SURFACE OF BRAKE PADS.MS10-5-96 2577J.S6-15-95 1019REVISIONBASHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: 10-19-94RELEASENO.A4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RPRO-TECHASSEMBLY,TORQUE,LIMITERF - 36SCALE:RAS 1/1SIZE:ADwg:001-180GBC Pro - Tech Parts ManualF 36 : 001 - 180 Torque Limiter

R© GBC Pro - Tech April 1999 Page 1 - 30{(9.0)}{(5.0)}1256{(6.50)}{(3.0)}3478REQ'D DESCRIPTIONPART NO. ITEM1 DUCT COVER, 1 X 9 " LG 180-130 11 DUCT BASE, 1 X 9 " LG ( WITH ADHESIVE ) 180-140 21 DUCT COVER, 1 X 6.5" LG 180-130 31 DUCT BASE, 1 X 6.5" LG ( WITH ADHESIVE ) 180-140 41 DUCT COVER, 1 X 5" LG 180-130 51 DUCT BASE, 1 X 5" LG ( WITH ADHESIVE ) 180-140 61 DUCT COVER, 1 X 3" LG 180-130 71 DUCT BASE, 1 X 3" LG ( WITH ADHESIVE ) 180-140 82 DUCT COVER, 1 X 2" LG 180-130 92 DUCT BASE, 1 X 2" LG ( WITH ADHESIVE ) 180-140 10{(2.0)}910REV ECN BY DESCRIPTIONUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645PANDUIT ASSEMBLYFALCON 36DRAWN BY:SCALE:SIZE:Dwg:001 - 232GBC Pro - Tech Parts ManualF 36 : 001 - 232 Panduit Set

© GBC Pro - Tech April 1999 Page 1 - 3187654REQ'D DESCRIPTIONPART NO. ITEM1 HUB,BRAKE,REWIND 625-002 11 SCREW,SET,3/8-16 X .250 050-023 21 CHUCK,CORE,QUICK RELEASE,REWIND 530-006 33 GRIPPER,CORE 100-032 46 SCREW,SELF-TAPING,#6-32 X .375 - 51 WASHER,NYLON 035-100 61 SPRING,WAVE 089-130 71 BRAKE,ADJUST NUT,REWIND 625-004 8321REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCE2117 N. Stoughton Rd. Madison, Wisconsin 53704DIM. ASTOL.Phone (608) 246-8844 Fax (608) 246-8645SHOWNFINISHTO BEX/X P 1/64TITLE:ASS'Y,BRAKE,REWIND125X. P .050F - 36X.X P .020X.XX P .010DATE: DRAWN BY: DWG SCALE:ANGLESDwg:P 1DX.XXX P .0052-22-95 K.L. C1Pro-Tech Engineering001-237GBC Pro - Tech Parts ManualF 36 : 001 - 237 Brake, Rewind

© GBC Pro - Tech April 1999 Page 1 - 32PLACE INSIDECABINETIN VISIBLE LOCATION763 474REQ'D DESCRIPTIONPART NO. ITEM2 DECAL,DANGER HAZARDOUS VOLTAGE 450-131 21 DECAL,WARNING MOVING PARTS 450-132 32 DECAL,WARNING CRUSH AND BURN,RIGHT 450-134 41 DECAL,WARNING READ MANUAL 450-135 51 DECAL,READ SAFETY INSTRUCTIONS 450-136 65 DECAL, HIGH VOLTAGE 450-035 7577ON OUTSIDE22BJT3-11-98 3072REVISIONA7This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:3-2-95 K.L. C8Pro-Tech EngineeringKIT, SAFETY LABELFALCON 362117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:001-260GBC Pro - Tech Parts ManualF 36 : 001 - 260 Safety Label Kit

© GBC Pro - Tech April 1999 Page 1 - 33REQ'D DESCRIPTIONPART NO. ITEM1 IDLER,INFEED,PAPER 620-017 11 SHAFT,IDLER,INFEED,PAPER 710-057 22 BEARING,FLANGE 026-105 3REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:1 2 3Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,IDLER,PAPERFALCON 36DATE: DRAWN BY: DWG SCALE: Dwg:6-23-95 RAS A2 001-310GBC Pro - Tech Parts ManualF 36 : 001 - 310 Assembly, Idler, Paper

© GBC Pro - Tech April 1999 Page 1 - 34342REQ'D DESCRIPTIONPART NO. ITEM1 ASSEMBLY,IDLER,PAPER 001-310 12 BRACKET,MOUNTING,IDLER 510-141 22 SHCS,3/8-16 X 1 - 32 WASHER,LOCK,3/8 - 412REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,IDLER,INFEED,PAPERFALCON 36Dwg:001-311GBC Pro - Tech Parts ManualF 36 : 001 - 311 Assembly, Table Idler

R© GBC Pro - Tech April 1999 Page 1 - 35DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4 34C2331REQ'DREPLACE SHOULDERBOLTS HERE WITHITEM-6622DESCRIPTIONMOVE TIEBAR SHAFT TO THIS LOCATIONUSE EXISTING SHOULDER BOLTSHERE2639MS11-14-97REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWN TOL. FINISHTO BEX/X P 1/64125X. P .050X.X P .020ANGLESX.XX P .010P 1DX.XXX P .0051TITLE:1PART NO.1 ASSEMBLY,IDLER,INFEED,PAPER 001-311 11 ASSEMBLY,REWIND 001-317 21 SHAFT,DUMMY 710-021 31 NUT,HEX,1/2-13 - 42 SHCS 3/8-16 X 1.25 64151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-86458-22-95DATE: DRAWN BY: SCALE:RELEASERAS 1/1NO.PRO-TECHASSEMBLY,UNWIND,PAPERFALCON 36SIZE:CDwg:ITEM001-321DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 321 Paper Unwind

© GBC Pro - Tech April 1999 Page 1 - 36PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH12CAREQ'D DESCRIPTIONPART NO. ITEM1 KNOB,CLAMP,FEMALE,1/4-20 465-008 11 SET SCREW 1/4-20 X 2 1/2 CUP POINT 050-030 22577MS10-4-96REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:10-30-954151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: DRAWN BY: SCALE:RELEASERAS A1NO.RPRO-TECHASSEMBLY,KNOB,CLAMPFALCON 36SIZE:Dwg:001-332GBC Pro - Tech Parts ManualF 36 : 001 - 332 Assembly, Clamp Knob, Unwind

N© GBC Pro - Tech April 1999 Page 1 - 37DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC32 164331782REQ'DDESCRIPTIONPART NO. ITEM1 BRACKET,MOUNTING,UNWIND,RIGHT 510-155 11 BRACKET,MOUNTING,UNWIND,LEFT 510-153 21 FHSCH, 1/2-13 X 1 1/4 31 CHUCK,CORE,QUICK RELEASE 530-028 46 SCREW,SELF-TAP,6-32 X .38 53 GRIPPER,CORE 100-032 61 CHUCK,CORE 530-000 71 BUSH,BRNZ,.75,1,1.25 /FB1216-10 040-018 81 BOLT,SHLDR,.75,3.5,5/8-11 91 BRAKE,UNWIND 625-000 101 SPRING,WAVE,.75 /SSR-0100 089-106 111 SETSCREW, 3/8 - 16 X 3/8, BRASS TIP 050-022 122 ASSEMBLY,KNOB,CLAMP 001-332 131 ASSEMBLY,KNOB,CLAMP,BRAKE 001-131 141 PIN,DOWEL,3/16 X .75 095-180 151 CHUCK,CORE 530-014 162 WASHER, FEND, 1/4 X 1/2 - 171 WASHER, THRUST/TRA-1220 032-291 18218 11149106312298257796252196250095AJ6/17/ HM10-5- SRL2-21- MRA12-20- SREVISIODCBA15C5SHEET 1OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINISN.TO HX/ P 1/BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .0051TITLE:-4121713R PRO-TECH4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532 Fax (608) 246-8645ASSEMBLY,UNWIND,UPPERDRAWN SCALE SIZEDATEBY:: ::RELEAS10-31-95 RAS C1ENO.Dwg:001-335DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 335 Assembly, Unwind, Upper ( CNO )

MNR© GBC Pro - Tech April 1999 Page 1 - 38DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH34C2163312REQ'DDESCRIPTIONPART NO. ITEM1 BRACKET,MOUNTING,UNWIND,RIGHT 510-156 11 BRACKET,MOUNTING,UNWIND,LEFT 510-154 21 FHSCH, 1/2-13 X 1 1/4 31 CHUCK,CORE,QUICK RELEASE 530-028 46 SCREW,SELF-TAP,6-32 X .38 53 GRIPPER,CORE 100-032 61 CHUCK,CORE 530-000 71 BUSH,BRNZ,.75,1,1.25 /FB1216-10 040-018 81 BOLT,SHLDR,.75,3.5,5/8-11 91 BRAKE,UNWIND 625-000 101 SPRING,WAVE,.75 /SSR-0100 089-106 111 SETSCREW, 3/8 - 16 X 3/8 BRASS TIP 050-022 122 ASSEMBLY,KNOB,CLAMP 001-332 131 ASSEMBLY,KNOB,CLAMP,BRAKE 001-131 1421 PIN,DOWEL,3/16 X .75 095-180 151 CHUCK,CORE 530-014 162 WASHER, FENDER, 1/4 X 1/2 - 171 WASHER, THRUST/ TRA-1220 032-291 1878AJ6/17/ H18 11931229825779625219610-5- SRL2-21- MREVISIOCBA1413SHEET 1OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOLSHOW ASFINIS.NTO HX/ P 1/BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005BBTITLE:1DATERELEAS :NO E.4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-864510-31-95121741015PRO-TECHASSEMBLY,MOUNTING,UNWINDLOWERDRAWN SCALE SIZE DwgBY:: : :RAS C1 001-33656DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 336 Assembly, Unwind, Lower ( CNO )

R© GBC Pro - Tech April 1999 Page 1 - 39DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC4110893352362REQ'DDESCRIPTIONPART NO. ITEM1 BLCK,GEAR 570-001 11 GEAR,HELI,RH,MOD 570-003 21 SCRW,ACME,MOD 645-001 31 BUSH,BRNZ,FLG,.75,1,.75 /FB1216-6 040-004 42 BUSH,BRZ,FLG,.62,.75,.50 /FB1012-4 040-001 51 BLK,BRG,ROLL,MAIN,UPR 501-003 61 BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8 040-009 71 BLOCK,SPRING,PLATE,BEARING 501-004 82 SPRING,COMPRESSION,536LBS/in 089-004 92 STRIP 3/8 x 1 1/4 - 10742AJH1/26/98 3020REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:14151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 8-28-93 DRAWN BY: SCALE:RELEASERAS 1/1NO.PRO-TECHASSY,LFTR,ROLL,MAINFALCON 36SIZE:CDwg:001-411DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 411 Assembly, Lift, Control

© GBC Pro - Tech April 1999 Page 1 - 40PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH34 5 4C101 297 8 7 6REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT,DRIVE,REWIND,FALCON 710-008 11 KEY,3/16 X .62 - 21 BUSH,BRONZE,.75 X 1 X .75 /FB1216-6 040-004 32 WASHER,THRUST,.75 X .030 /TRA-1220 032-291 41 BEARING,THRUST,.75 /NTA-1220 032-292 51 WASHER,THRUST,1 X .153 /TRE-1625 032-310 62 WASHER,THRUST,1 X .125 /TRD-1625 032-300 71 BEARING,THRUST, 1 /NTA-1625 032-190 82 NUT,JAM,HEX, 3/4-16 - 91 SPROCKET,35,25T,.75 /BS35-26 3/4 435-260 1031102638BJT5-14-98MS1-13-97REVISIONBASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 10-17-96 DRAWN BY: SCALE:RELEASEMS 1/1NO.RPRO-TECHASSY,SPROCKET,FALCON-SIZE:ADwg:001-412GBC Pro - Tech Parts ManualF 36 : 001 - 412 Rewind Assembly, Drive

R© GBC Pro - Tech April 1999 Page 1 - 41DCBA(SIM TO 001-411)4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC411089333622REQ'DDESCRIPTIONPART NO. ITEM1 BLCK,GEAR 570-001 11 GEAR,HELI,RH,MOD 570-003 21 SCRW,ACME,MOD 645-001 31 BUSH,BRNZ,FLG,.75,1,.75 /FB1216-6 040-004 42 BUSH,BRZ,FLG,.62,.75,.50 /FB1012-4 040-001 51 BLK,BRG,ROLL,MAIN,UPR 501-003 61 BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8 040-009 71 BLOCK,SPRING,PLATE,BEARING 501-004 82 SPRING,COMPRESSION,536LBS/in 089-004 92 STRIP 3/8 x 1 1/4 - 105 472AJH1/26/98 3020REVISIONASHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNTOL. FINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .005TITLE:14151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 10-28-96 DRAWN BY: SCALE:RELEASEMRS 1/1NO.PRO-TECHASSY,LFTR,ROLL,MAINFALCON 36SIZE:CDwg:001-417DCBAGBC Pro - Tech Parts ManualF 36 : 001 - 417 Assembly, Lift, Drive

© GBC Pro - Tech April 1999 Page 1 - 424REQ'D DESCRIPTIONPART NO. ITEM4 1/2-13 HEX NUT #36510 - 18 24 CASTER 470-007 3REF F36 MACHINE BASE - 41 INSTRUCTION DIAGRAM, CASTER MOUNT, F36 820-073 5123NOTES:1. ASSEMBLY PARTS LOOSELY SO THAT NUT CAPTURES WASHERS.2. BAG EACH CASTER ASSEMBLY SEPARATELY.3. MARK ASSEMBLY NUMBER ON EACH BAGGED CASTER.REVISIONSHEET 2101 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHX/XX.X.XX.XXX.XXXPRO-TECHR4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645TO BEP 1/64TITLE:125P .050 ASSY, LARGE CASTERS, F36P .020 BPICS9300079P .010 ANGLES DATE:7/1/98 DRAWN BY: SCALE:SIZE:Dwg:P 1DP .005RELEASEAJH 1:1 C 001-526NO.2101GBC Pro - Tech Parts ManualF 36 : 001 - 526 Large Castors, 39” Nip Height

GBC Pro - Tech Parts ManualFalcon 60Illustrated Parts Diagrams( 000 - 056 )© GBC Pro - Tech April 1999 Page 2 - 1

© GBC Pro - Tech April 1999 Page 2 - 2450 - 110Decals, E-Stop214 - 290Switch, auto/stop450 - 073Decal, auto/stop545 - 011Cover, pull roll slot470 - 130Castor wheels465 - 032Knob, clutch673 - 002Plug, clutchDrive Side645 - 011Threaded rods520 - 051Cover, cabinet, drive520 - 052Cover, cabinet, control450 - 072450 - 072F-60 Decal, F-60Decal, F-60 F-60520 - 064Cabinet, drive214 - 313Push buttons, E-Stop545 - 010Cover, main roll slot450 - 136Decal, read safety001 - 452Accessory kit001 - 429Assembly, control panel629 - 018Crank handle450 - 078Decal, roll lift520 - 063Cabinet, controlControl Side186 - 000Holders, fuse186 - 002Fuse carriers186 - 007Circuit breaker(2) 186 - 220 & (1) 186 - 0162.5 amp & 0.5 amp450 - 101Decal, fuse175 - 180Strain relief, 1/2"214 - 313Push buttons, E-Stop214 - 314Contact, E-Stop450 - 135Decal, read instructions450 - 062Decal, reset214 - 008Push button, reset465 - 015Handles, pull450 - 115Decal, serial plate450 - 031Decal, CE175 - 201Strain relief, 3/4"GBC Pro - Tech Parts ManualF 60 : Side Cabinets & Covers

GBC Pro - Tech Parts ManualF 60 : Front / Rear viewsFront View001 - 432Assembly, rewind drive690 - 059Main rolls770 - 004Tie bars670 - 060Pressure plate001 - 439Assembly, rewind brake001 - 158Assembly, unwind brake, top001 - 429Assembly, control panel760 - 051Table, infeed510 - 298Brackets, table001 - 394Assembly, idlers629 - 018Crank handle465 - 032Knob, clutch001 - 396Assembly, unwind brake, lower710 - 076Shafts, unwind470 - 130Castor wheels182 - 200Fan, reverse impellar001 - 510Assembly, core chucks530 - 022Core supports545 - 012Cover, fanRear View545 - 009Cover, pull roll690 - 052Pull roll, upper465 - 015Handle, pull100 - 025Catch, grabbers214 - 313Push button, E-Stop700 - 009Saddles, unwind214 - 314Contact, E-Stop214 - 290Switch, auto/stop710 - 085Shaft, pull roll, upper500 - 007Bearing, flanged, pull roll186 - 007Circuit breaker629 - 013Handle, pull roll lift465 - 032Knob, clutch001 - 439Assembly, rewind, brake001 - 432Assembly, rewind drive860 - 014Rewind tube690 - 053Pull roll, lower770 - 004Tie bars425 - 003Motor© GBC Pro - Tech April 1999 Page 2 - 3

GBC Pro - Tech Parts ManualF 60 : Control Side005 - 028Spring tensioning kit189 - 032Heater, zoned230 - 006Infrared sensor001 - 435Assembly, force guage sensor056 - 03Assembly, main roll lift001 - 158Assembly, unwind brake, upper510 - 306Brackets, heater, top629 - 015Lever089 - 020Spring, gas, 150 lbs.250 - 001Photo-eye, receiver001 - 356Assembly, sensor, force guage620 - 406Idler, powder coated001 - 437Assembly, magnet, force guage001 - 463Assembly, TS 3214 - 005Switch, safety510 - 307Brackets, heater, bottom525 - 007Eccentric, pull roll500 - 007Bearing, flanged629 - 018Crank handle001 - 483Assembly, wire duct001 - 444Assembly, electrical panel001 - 396Assembly, unwind brake, lower214 - 263Foot switch280 - 014Wire harness510 - 265Bracket, fan, ssr182 - 000Fan, ssr470 - 130Castor wheels© GBC Pro - Tech April 1999 Page 2 - 4

© GBC Pro - Tech April 1999 Page 2 - 5217 - 250Cover, jumper bar, 4mm217 - 140Terminal, ground, 4mm217 - 270Terminals, 4mm, blue217 - 240Jumper bar, 4mm207 - 007Relay base207 - 006Relay, 24 vdc245 - 205Power supply217 - 003Din rail, 3.5"-OUT-5+5+OUT100 - 015Bracket, capacitor185 - 001Capacitor001 - 447Assembly, PCB185 - 032Filter, motor3 1 12J3 J44 2 6220 - 110Barrier board11510 9 8 74 3 2 1280 - 014Wire harness220 - 160Motor controller boardP3P2 P1 I1 F+ F-186 - 135Fuses, 20 ampL1 L2 A+ A-4 3J2 2 1001 - 342Assembly, MOV's1 2OUTPUTINPUT4 3220 - 130HP resistor1 2OUTPUTINPUT4 3207 - 005SSR's, Carlo Gavazzi207 - 189Relay, safety, Crouzet185 - 005Rectifier, std recovery217 - 170Rail ends217 - 003Din rail, 3.5"217 - 140Terminal, ground, 4mm217 - 120Terminals, 4mm, grey217 - 215Cover, terminal, 10mm217 - 220Terminals, 10mm217 - 170Rail ends217 - 003Din rail, 3.5"207 - 003Covers, SSR's210 - 010Contactor, Siemens, 24vdc217 - 170Rail ends670 - 028Panel, electricalGBC Pro - Tech Parts ManualF 60 : 001 - 444 Electrical Panel

GBC Pro - Tech Parts ManualF 60 : 001 - 429 Front & Rear Panels ( CNO )Front Control Panel001 - 374Assembly, PCB670 - 029Panel, control230 - 007Temp controller450 - 074Overlay, control panel100908070605040302010OI214 - 296Cover, switch, black214 - 270Switch, on/off214 - 012Push button, reset%230 - 007Temp controller214 - 295Cover, switch, red/greenOI214 - 296Cover, switch, black214 - 290Switch, auto/stopOI214 - 270Switch, on/off214 - 296Cover, switch, blackOI214 - 296Cover, switch, black214 - 010Switch, DBL pole5 6473829110OI214 - 270Switch, on/off214 - 296Cover, switch, black214 - 270Switch, on/off465 - 031Knob, speed220 - 161Potentiometer, rotaryRear Control Panel214 - 295Cover, switch, red/greenI450 - 073Decal, auto/stop214 - 290Switch, auto/stopO© GBC Pro - Tech April 1999 Page 2 - 6

GBC Pro - Tech Parts ManualF 60 : Drive Side001 - 428Assembly, adjustable tensioner520 - 064Cabinet, drive side435 - 175Sprocket, rewind440 - 125Sprocket, adjustable tensioner001 - 517Assembly, self tensioner440 - 130Sprocket, idler500 - 007Bearing, flanged435 - 212Sprocket, pull roll, lower400 - 009Chain, clutch375 - 007Clutch750 - 006Sprocket, motor001 - 517Assembly, self tensioner435 - 175Sprocket, rewind056 - 03Assembly, main roll lift440 - 130Sprocket, idler250 - 002Photo-eye, emitter026 - 000Bearing, flanged, main510 - 307Bracket, heater, bottom400 - 007Chain, drive roll, main440 - 130Sprocket, idler400 - 015Chain, unwinds440 - 130Sprocket, self tentioner645 - 011Threaded stud470 - 130Castor wheels425 - 003Motor© GBC Pro - Tech April 1999 Page 2 - 7

LOWHIGHHIGHLOW© GBC Pro - Tech April 1999 Page 2 - 8700 - 009Saddles545 - 009Cover, pull roll465 - 030Bumpers757 - 019Support, center table757 - 017Support, fan bridge, rear425 - 003Motor770 - 004Tie bar100 - 025Catch, grabberDrive Side770 - 004Tie bar770 - 004Tie bar001 - 394Assembly, idler, tension001 - 226Assembly, idler, chrome700 - 013Saddle, drive side757 - 018Support, fan bridge, front700 - 009Saddles182 - 200Fan545 - 012Cover, fan700 - 009Saddles001 - 394Assembly, idler, tension001 - 226Assembly, idler, chrome700 - 019Saddle, anti-static757 - 018Support, fan bridge, front001 - 396Assembly, brake, lower182 - 200Fan545 - 012Cover, fan001 - 396Assembly, brake, lowerControl Side770 - 004Tie bar770 - 004Tie bar100 - 025Catch, grabber001 - 158Assembly, brake, upper545 - 009Cover, pull roll465 - 030Bumpers757 - 017Support, fan bridge, rear770 - 004Tie bar470 - 130Castor, wheelsGBC Pro - Tech Parts ManualF 60 : Bridge & Inside Parts

R© GBC Pro - Tech April 1999 Page 2 - 9* NOT PART OF THISASSEMBLY510 - 223UNWIND CLEVIS* FOR PART NUMBERREFERENCE ONLY510 - 223UNWIND CLEVISUDETAIL ADISC SPRING ORIENTATION3X SCALEREQ'D2DESCRIPTION15425362507116611610937GTS4-8-96RLM1-25-P.R 9611-01- .P.R 9510-26- .95RAS3-03-95REVISIONEDCBASHEET 1 OF89UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .0051TITLE:367PART NO.1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 41 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 KNOB, ADJUSTMENT, BRAKE 465-020 9SEE DETAIL A211-15-DATE:DRAWN BY:94 RARELEASENO.SPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, BRAKE-SCALE:1/1SIZE:CDwg:ITEM001-158GBC Pro - Tech Parts ManualF 60 : 001 - 158 Unwind Brake, Upper

© GBC Pro - Tech April 1999 Page 2 - 10REQ'D DESCRIPTIONPART NO. ITEM2 BEARING, IDLER 020-100 11 IDLER, 2" X 64", NICKEL 620-405 2REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1D2 1TITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY,IDLERF 60, ORCA II, ORCA IIIDATE: DRAWN BY: DWG SCALE:1-10-95 K.L. A1Dwg:001-226GBC Pro - Tech Parts ManualF 60 : 001 - 226 Idler, Tension, Chrome

© GBC Pro - Tech April 1999 Page 2 - 1111Solder21SolderREQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 METAL-OXIDE VARISTOR 185-006 22 SHRINK TUBE, 1/8 DIA. BY 1.0" 180-425 31 SHRINK TUBE, 0.5" DIA. BY 0.85" 180-450 4REVISIONApply a heat shrink tube after solderingThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY. MOV FOR O-III SSR, F 60DATE: DRAWN BY: DWG SCALE:3-26-96 HZ A134Dwg:001-342GBC Pro - Tech Parts ManualF 60 : 001 - 342 M.O.V.

© GBC Pro - Tech April 1999 Page 2 - 12PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHFOR IF40 (000-059) & Falcon 36 Series II(000-061):Replacement for 001-356 Force SensorAssembly is 001-504.This assembly uses 1.00" locating dimensionand is interchangable with the original001-356.231CdimensionREQ'D DESCRIPTIONPART NO. ITEM1 FLAT 672-021 11 TRANSDUCER,HALL EFFECT 185-007 21 TERMINAL 3 LEAD 217-001 3AJH3/31/98 3086AFOR F60 (000-056) & DS60 (000-052):Replacement for 001-356 Force Sensor Assembly is001-503.This assembly uses .38" locating dimension.REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 07\16\96 DRAWN BY: SCALE:RELEASENO.1247MS 1/1RPRO-TECHASSY, SENSOR, FORCEF - 60SIZE:ADwg:001-356GBC Pro - Tech Parts ManualF 60 : 001 - 356 Sensor, Force Guage

© GBC Pro - Tech April 1999 Page 2 - 13PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC1.SOLDER SPEC: WAVE SOLDERING2.UL SPEC: UL 796,SEVENTH EDITIONREQ'D DESCRIPTION PART NO. ITEM1 PARTS LIST SPEC. DOC 001-374.xls 11 TEST AND CALIB.DOC 820-050. 21 SCHEMATIC 810-022 31 FABRICATED PCB 671-005 4REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4-30-97 DRAWN BY: SCALE:RELEASENO.2032GTS 1/1RPRO-TECHASSY, FORCE GAUGE PCB-SIZE:ADwg:001-374GBC Pro - Tech Parts ManualF 60 : 001 - 374 PCB, Force Guage

© GBC Pro - Tech April 1999 Page 2 - 14DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4PROPRIETARY1.0REFC332 1B2REQ'D22 BEARING, IDLER 020-100 11 IDLER, 2" X 64", POWDER COATED 620-406 21 SHAFT, IDLER ROLL 710-080 33PRESS INTO - 2 -DJG11/16/98 3210AJH10/1/98 3183REVISIONCENTER ON -2-SHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONTIGHTEN SET SCREWS AGAINST SHAFT.BA1FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 2-26-97 DRAWN BY: SCALE:RELEASEAJH 1/1NO.1236R1PART NO.PRO-TECHAssembly, idler, powder coatedF 601SIZE:BDwg:ITEM001-394DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 394 Idler, Tension, Powder Coated

R© GBC Pro - Tech April 1999 Page 2 - 15PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4CUDETAIL ADISC SPRING ORIENTATION3X SCALE510 - 223Unwind clevis* Not part of thisassembly !For part numberreference only !510 - 223Unwind clevis21315REQ'D9812 11367SEE DETAIL A2DESCRIPTION1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 42872AJ7-17- H97REVISIONA10APPLY ANTI-SIEZE COMPOUND1.44PART NO.1 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 STUD 645-024 91 UNWIND DIAL 625-018 101 3/8 WASHER STK 111 3/8 NYLOC NUT STK 121 3/8 NUT STK 13SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDPRO-TECHTOLERANCEDIM. AS4151 Anderson Road, DeForest, Wisconsin 53532SHOWNTOL.FINISHPhone (608) 246-8844 Fax (608) 246-8645TO BEX/X P 1/64TITLE:125X. P .050ASSEMBLY, BRAKEX.X P .020DS-60, F-602-24-X.XX P .010 ANGLES DATE: DRAWN BY: SCALE: SIZE: Dwg:97P 1DAJX.XXX P .005RELEASE1/1NO.1231 HCAITEM001-396GBC Pro - Tech Parts ManualF 60 : 001 - 396 Unwind Brake, Lower

© GBC Pro - Tech April 1999 Page 2 - 16DCBA4PROPRIETARY4C4333APPLY BLUELOCTITE2REQ'D DESCRIPTION PART NO. ITEM1 SHFT,IDL,L5/SO1 440-110 11 SPRKT,35,13T,.5/358S13F 440-125 21 IDLER_BASE 440-002 31 HEX_HEAD_BOLT,5/16-18_X_.875 - 41 SHAFT_COLLAR - 51 SET_SCREW_10-32_X_.25 - 61 GREASE_ZERK - 7715262APPLY BLUELOCTITEREVISIONSHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.EASSEMBLY,IDLER,ADJUSTABLECHAIN_F-60,DS-604-22-971361DRAWNBY:MAARSCALE:1/11PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-86451SIZE:BDwg:GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH001-428DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 428 Adjustable Chain Tensioner

© GBC Pro - Tech April 1999 Page 2 - 17DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH85671043C9334212REQ'DDESCRIPTIONPART NO. ITEM1 PLUG, CLUTCH DRIVE 001-261 11 WASHER, THRUST, .090 THK 032-420 21 WASHER, THRUST .030 THK 032-410 31 BEARING, THRUST 032-400 41 BUSHING, MODIFIED 500-009 51 KEY, 1/4 X 1/4 X 3/8 LG - 61 NYLOCK NUT, 5/8-11 - 71 SPROCKET, 35BS20x5/8 435-175 86 WASHER, THRUST, .090 THK 032-205 91 BEARING, THRUST 032-190 102D.G.1-28-98 3022REVISIONASHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.E4-23-974151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:MAARPRO-TECH1362SCALE:1:111SIZE:BDwg:ASSY, REWIND, DRIVEF-60, DS-60001-432DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 432 Rewind Drive

© GBC Pro - Tech April 1999 Page 2 - 18PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC2REQ'DDESCRIPTIONPART NO. ITEM1 GUIDE BRACKET 595-007 11 TRANSDUCER ASSY 001-356 22 #4-40 x 1/8 BHSCS STK 312806AJH6-5-97REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:34151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4/22/97 DRAWN BY: SCALE:RELEASE1345AJH 1:2NO.RPRO-TECHFORCE SENSOR ASSYF-60/DS-60SIZE:ADwg:001-435GBC Pro - Tech Parts ManualF 60 : 001 - 435 Force Guage Sensor

© GBC Pro - Tech April 1999 Page 2 - 1954PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH.45REF1 2BACNREQ'DDESCRIPTIONPART NO. ITEM1 BRACKET, HALL SENSOR 510-226 12 PLATE 672-020 21 MAGNET 475-701 31 #10-32 SHCS - 41 #10-32 NYLOC NUT - 5-- BLACK MAX 380 ADHESIVE - 627992767AJH6-3-97AJH5-19-97REVISIONBA3SHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXLOCATE MAGNET NORTHPOLE AT TOP OF THIS VIEW.TOL.P 1/64P .050P .020P .010P .005WRITE "N" HERE WITH PERMANENTINK MARKER.61FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4-22-97 DRAWN BY: SCALE:RELEASENO.1404AJH 1/1RPRO-TECHASSY, MAGNET/FORCE SENSORF-60/DS-60SIZE:ADwg:001-437GBC Pro - Tech Parts ManualF 60 : 001 - 437 Force Guage Magnet

© GBC Pro - Tech April 1999 Page 2 - 20DCBGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH244PROPRIETARY11C9 1038 7SHEET 1 OF 113UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHA X/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX31251364REQ'D22DESCRIPTIONREVISIONTITLE:DATE:RELEASNO.E4-24-97DRAWNBY:MAARSCALE:1:11PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-86451363PART NO.1 PLUG, CLUTCH, ORCA I X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SNAP RING, 1" SHAFT 090-140 71 SPRING, 1" ID X 3/8 LG 089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 112 THRUST WASHER 032-300 121 USS F/W 7/16 - 131SIZE:BDwg:ITEMREWIND, BRAKEF-60, DS-60001-439DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 439 Rewind Brake

© GBC Pro - Tech April 1999 Page 2 - 21DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C33REQ'D2DESCRIPTION2REVISIONSHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWNAS TOL. FINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.E5-8-97PART NO.1 PARTS LIST SPEC.DOC 001-447.XLS -1 TEST AND CALIB.DOC 820-070 -1 SCHEMATIC 810-030 -1 FABRICATED PCB 617-011 -4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:GTSR1PRO-TECHSCALE:1/11SIZE:ADwg:ITEMCONTROL PCBF-60/DS-60001-447DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 447 PCB, Electrical Panel

© GBC Pro - Tech April 1999 Page 2 - 22PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCREQ'DDESCRIPTIONPART NO. ITEM1 FUSE, 250V, 20 AMP, CERAMIC 186-135 13 FUSE, 3 AMP 186-200 21 MANUAL 930-004 31 BOX 475-010 41 TOWEL 475-950 51 ZIPPY KNIFE 475-620 61 MASKING TAPE 475-000 71 RUBBER CEMENT PICKUP 930320 81 ALLEN WRENCH SET 475-230 94 MOUNT, MACHINE, ZSW-IV 470-101 101 STRAIN RELIEF, MAIN POWER 175-201 112 O-RINGS, POLYURETHANE 480 - 005 122930AJH9-4-97REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ACCESSORY KIT, F-60-DATE: 5-1-97 DRAWN BY: SCALE:RELEASENO.1408AJH 1/1RPRO-TECHSIZE:ADwg:001-452GBC Pro - Tech Parts ManualF 60 : 001 - 452 Accessory Pack

© GBC Pro - Tech April 1999 Page 2 - 23DCB4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4(Ø0.126)3C22234 25SHEE1616 OF 1TUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.A SHOWN AS TOL. FINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX322133REQ'D3332DESCRIPTION2REVISIONTITLE:DATE:RELEASNO.E8-25-97DRAWNBY:AJHR1PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, TS3 TERMINAL STRIPF60/DS601616PART NO.4 JUMPER, TERMINAL BLOCK 185-014 14 TERMINAL BLOCK, 2-CONDUCTOR, CENTER 185-015 21 TERMINAL BLOCK, 2-CONDUCTOR, END 185-016 37 TERMINAL BLOCK, 4-CONDUCTOR, CENTER 185-017 41 ENDPLATE, TERMINAL BLOCK 185-018 5SCALESIZE::1:1 B1Dwg:ITEM001-463DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 463 TS3

R© GBC Pro - Tech April 1999 Page 2 - 24DCBA4 3 2PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4.02 343 2C3.011.05.0 2.0 8.01REQ'DNOTES:1. CUT EACH SECTION TO THE DIMENSION SHOWN.2. ITEM 1 IS CUT INTO 5" AND 8" SECTIONS. WHEN INSTALLED, A 2" GAP ISLEFT BETWEEN THEM AND THE 15" COVER FITS OVER BOTH SECTIONS.SEE NOTE 23DESCRIPTION15.03 2 1REVISIONSHEET 1918 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX1TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.2-27-981PART NO.13" WIRE DUCT 1" X 1" CHANNEL W/ ADHESIVE 180-110 115" WIRE DUCT 1" X 1.5" CHANNEL W/ ADHESIVE 180-140 230" WIRE DUCT COVER, 1" 180-130 3PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645WIRE DUCT ASSEMBLYF-601918DRAWN BY: SCALE: SIZE:BJT 1:1 CITEMDwg:001-483DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 483 Wire Duct

© GBC Pro - Tech April 1999 Page 2 - 25PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHNOTE:ITEM 2 MUST PIVOT FREELYCAREQ'D1 2 3DESCRIPTIONPART NO.1 CHUCK,CORE 530-023 13 BLOCK,PIVOT 501-036 23 PIN,DOWEL,1/8 DIA X 3/4 095-102 31 SET SCREW,BRASS,3/8-16 X 3/8 050-022 4REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,CORE CHUCK,QUICK RELEASEDATE: 4/17/98 DRAWN BY: SCALE:RELEASENO.1981AJH 1/1RPRO-TECHSIZE:A4LIGHT COATOF DOW 44Dwg:ITEM001-510GBC Pro - Tech Parts ManualF 60 : 001 - 510 Core Chuck

R© GBC Pro - Tech April 1999 Page 2 - 26DCBA4 3 2PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C3415REQ'DDESCRIPTION3 2 12REVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNTOL. FINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .005TITLE:1PART NO.1 TENSIONER, CHAIN 440-150 11 SPROCKET, 19T 440-130 21 1/2-13 x 1 1/4 HHCS - 31 THRUST WASHER, TRB-815 032-140 41 NUT, NYLOCK, 1/2-13 - 54151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-86456-4-DATE: DRAWN BY: SCALE:98RELEASEDJG 1/1NO. 2006PRO-TECHASSY,TENSIONER,CHAINF-60/DS-60SIZE:CDwg:ITEM001-517DCBAGBC Pro - Tech Parts ManualF 60 : 001 - 517 Self Tensioner

© GBC Pro - Tech April 1999 Page 2 - 27PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHNOTES:1. PARTS ARE SHIPPED LOOSE.1CA3373526AAAAAINSULATING SLEEVE(REMOVED)REQ'D4 SPACER, HEATER SPRING 755-061 14 SPRING 089-022 2- SLEEVE, INSULATING 180-006 38 CABLE TIE, 8" STOCK 41 INSTRUCTIONS, HEATER TENSION 820-063 5AJH7/20/98 3148AREVISIONSHEET 1937 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONFINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.3-21-98DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645KIT, HEATER TENSIONF 601937SCALE:PART NO.4 #10 EXTERNAL LOCK WASHERS - 6434SIZE:BJT 1:1 ADwg:ITEM005-028GBC Pro - Tech Parts ManualF 60 : 005 - 028 Heater Tensioning Kit

SHEET #REF! OF #REF!UNLESS OTHERWISE SPECIFIEDRTOLERANCEDIM. AS4151 Anderson Road, DeForest, Wisconsin 53532TOL.SHOWNFINISHPhone (608) 246-8844 Fax (608) 246-8645TO BEX/X P 1/64TITLE:125X. P .050X.X P .020X.XX P .010 ANGLES DATE: 04/15/99 EDITED BY : SCALE: SIZE: Dwg:P 1D RELEASEX.XXX P .005NO. #REF!© GBC Pro - Tech April 1999 Page 2 - 28DCBA8PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH501-025BEARING BLOCK690-059ROLL, 5" RUBBER, MAIN040-035BUSHING710-084SHAFT, LIFT TORQUE290-560LOCK COLLAR020-007BEARINGBEARING BLOCK ASSEMBLY(TOP VIEW)C7ZERKFITTING755-054SPACER, GEARBOX6290-260Lock collars325-210CLEVIS, D-231-3629-014LEVER, CLAMP, ASSY032-400THRUST BEARING026-000BEARING, FLANGED755-053SPACER, TABLE BRACKET510-298TABLE BRKTDETAIL A620-406IDLER, 2 X 64, POWDER COATED032-420THRUST WASHER032-411THRUST WASHER020-007BEARING, MAIN ROLL UPPER5020-100BALL BEARING026-004BUSHING510-232BRACKET, CRANK LIFT629-018LINKAGE, CRANKHANDLE710-082SHAFT, CRANK4629-010LINK,ROLL PIVOT AXLE629-009LINK, ROLL BRG BLK501-025BLOCK, ROLL BEARING501-027BLOCK, ROLL BRG GIB629-011LEVER, ROLL LIFT430-005GEAR, WORM290-280CLAMP COLLAR026-004BUSHING (INTO GEAR BOX)8 7 6 5 4 33629-010LINK,ROLL PIVOT AXLE2501-028BLOCK, ROLL LIFT501-025BLOCK, ROLL BRGREVISION095-103PIN, DOWEL089-018SPRING, DIE290 - 260LOCK COLLAR001-505FORCE SENSOR ASSY629-012LINK, LIFT ROD040-003BUSHING, BRONZE430-008WORMSEE DETAIL A501-029BLOCK, GEARBOXSNFPRO-TECHASSEMBLY, MAIN ROLL LIFTFALCON 602 11056 - 003DCBAGBC Pro - Tech Parts ManualF 60 : 056 - 03 Assembly, Main Roll Lift ( CNO )

GBC Pro - Tech Parts ManualFalcon 60 +Illustrated Parts Diagrams( 000 - 076 )© GBC Pro - Tech April 1999 Page 3 - 1

© GBC Pro - Tech April 1999 Page 3 - 2375 - 009Torque limiter450 - 180Decals, warning triangle450 - 098Decals, E-Stop214 - 290Switch, run/stop450 - 095Decal, run/stop470 - 130Castor wheels450 - 134Decal, crush & burnDrive Side450 - 134Decal, crush & burn520 - 074Cover, cabinet, drive520 - 052Cover, cabinet, control450 - 114450 - 114F-60 + Decal, F-60+Decal, F-60 + F-60 +450 - 132Decal, moving parts645 - 011Threaded rods520 - 073Cabinet, drive214 - 313Push buttons, E-Stop545 - 010Cover, main roll slot001 - 551Accessory kit450 - 180Decals, warning triangle001 - 513Assembly, control panel629 - 018Crank handle450 - 078Decal, roll lift520 - 072Cabinet, controlControl Side186 - 000Holders, fuse186 - 002Fuse carriers186 - 007Circuit breaker(3) 186 - 220 & (1) 186 - 0162.5 amp & 0.5 amp450 - 101Decal, fuse175 - 180Strain relief, 1/2"214 - 313Push buttons, E-Stop214 - 314Contact, E-Stop450 - 135Decal, read instructions450 - 062Decal, reset214 - 008Push button, reset450 - 097Decal, main power465 - 015Handles, pull450 - 034Decal, potential earth450 - 115Decal, serial plate175 - 201Strain relief, 3/4"GBC Pro - Tech Parts ManualF 60+ : Side Cabinets & Covers

GBC Pro - Tech Parts ManualF 60+ : Front / Rear viewsFront View076 - 01Assembly, rewind drive690 - 059Main rolls770 - 004Tie bars670 - 060Pressure plate001 - 439Assembly, rewind brake001 - 158Assembly, unwind brake, top760 - 062Table, infeed001 - 513Assembly, control panel629 - 018Crank handle510 - 317Brackets, table375 - 009Torque limiter629 - 018Crank handle001 - 394Assembly, idlers001 - 396Assembly, unwind brake, lower710 - 076Shafts, unwind470 - 130Castor wheels001 - 510Assembly, core chucks530 - 022Core supports450 - 099Decals, forkliftRear View690 - 052Pull roll, upper760 - 060Table, rear001 - 394Assembly, idler214 - 313Push button, E-Stop700 - 009Saddles, unwind214 - 314Contact, E-Stop 214 - 290Switch, run/stop710 - 106Shaft, pull roll, upper510 - 308Bracket, rear table, drive510 - 320Bracket, rear table, control214 - 008Push button, reset186 - 007Circuit breaker001 - 439Assembly, rewind, brake629 - 018Crank handle375 - 009Torque limiter001 - 556Assembly, bridge, fans076 - 01Assembly, rewind drive860 - 014Rewind tube690 - 053Pull roll, lower182 - 101Fan, muffin, 4"770 - 004Tie bars425 - 003Motor© GBC Pro - Tech April 1999 Page 3 - 3

GBC Pro - Tech Parts ManualF 60+ : Control Side005 - 028Spring tensioning kit189 - 032Heater, zoned230 - 006Infrared sensor001 - 505Assembly, force guage sensor076 - 03Assembly, main roll lift001 - 158Assembly, unwind brake, upper510 - 306Brackets, heater, top001 - 553Assembly, pull roll lift250 - 001Photo-eye, receiver001 - 504Assembly, sensor, force guage001 - 437Assembly, magnet, force guage620 - 406Idler, powder coated620 - 406Idler, powder coated510 - 307Brackets, heater, bottom026 - 100Bearing, flanged629 - 018Crank handle510 - 134Bracket, IR sensor001 - 512Assembly, TS 3465 - 015Pull handles001 - 483Assembly, wire duct001 - 555Assembly, electrical panel001 - 396Assembly, unwind brake, lower670 - 417Cover, EMI housing280 - 044Wire harness182 - 000Fan, SSR001 - 509Assembly, terminal strip470 - 130Castor wheels645 - 011Threaded studs185 - 033Filters510 - 265Bracket, fan, ssr© GBC Pro - Tech April 1999 Page 3 - 4

© GBC Pro - Tech April 1999 Page 3 - 5217 - 250Cover, jumper bar, 4mm217 - 240Jumper bar, 4mm207 - 007Relay base207 - 006Relay, 24 vdc207 - 013Relay, 24 vdc207 - 110Base, relay, PTO8AE245 - 205Power supply41413217 - 213Din rail332212 8117 3106 295 112-OUT-5+5+OUT217 - 140Terminal, ground, 4mm217 - 270Terminals, 4mm, blue670 - 417Cover, EMI housing185 - 032Filter, motor217 - 043Terminal block3 1 12J3 J44 2 6220 - 110Barrier board11510 9 8 74 3 2 1280 - 044Wire harness220 - 160Motor controller boardP3P2 P1 I1 F+ F-L1 L2 A+ A-4 3J2 2 1001 - 554Assembly, PCB186 - 135Fuses, 20 amp001 - 342Assembly, MOV's1 2OUTPUTINPUT4 3220 - 130HP resistor1 2OUTPUTINPUTL1L2A112344 3207 - 005SSR's, Carlo Gavazzi185 - 005Rectifier, std recovery217 - 170Rail ends217 - 003Din rail, 3.5"217 - 140Terminal, ground, 4mm217 - 120Terminals, 4mm, grey217 - 215Cover, terminal, 10mm217 - 220Terminals, 10mm217 - 170Rail ends217 - 003Din rail, 3.5"207 - 003Covers, SSR's207 - 189Relay, safety, Crouzet217 - 170Rail ends210 - 010Contactor, Siemens, 24vdc670 - 028Panel, electrical217 - 170Rail endsGBC Pro - Tech Parts ManualF 60+ : 001 - 555 Electrical Panel

RGBC Pro - Tech Parts ManualF 60+ : Front & Rear Panels001 - 513 Front Control Panel001 - 374Assembly, PCB670 - 034Panel, control230 - 007Temp controller450 - 091Overlay, control panel214 - 296Cover, switch, black214 - 270Switch, on/off214 - 027Barrier, rocker switch230 - 007Temp controller214 - 295Cover, switch, red/green214 - 296Cover, switch, black214 - 290Switch, auto/stop214 - 296Cover, switch, black214 - 280Switch, fwd/rev564 73829110214 - 270Switch, on/off214 - 296Cover, switch, black214 - 270Switch, on/off194 - 003Indicator light, green465 - 031Knob, speed220 - 161Potentiometer, rotaryRear Control Panel214 - 295Cover, switch, red/greenI450 - 095Decal, auto/stop214 - 290Switch, auto/stopO© GBC Pro - Tech April 1999 Page 3 - 6

GBC Pro - Tech Parts ManualF 60+ : Drive Side440 - 130Sprocket, idler440 - 130Sprocket, idler435 - 175Sprocket, rewind076- 01Assembly, rewind, drive400 - 020Chain, pull roll lift214 - 313Push button, E-Stop400 - 018Chain, top rewind435 - 260Sprocket, idler, pull roll lift076 - 03Assembly, main roll lift001 - 552Assembly, pull roll lift510 -306Bracket, heater, upper375 - 009Torque limiter250 - 002Emitter620 - 406Idler, podwer coated620 - 406Idler, podwer coated400 - 017Chain, torque limiter510 - 231Bracket, Emitter440 - 006Chain tensioner510 - 307Bracket, heater, lower435 - 017Sprocket, quad, single026 - 000Bearing, flanged440 - 006Chain tensioner435 - 260Sprocket, idler, pull roll lift400 - 019Chain, bottom rewind400 - 007Chain, drive main roll435 - 175Sprocket, rewind217 - 043Terminal block645 - 011Threaded stud645 - 011Threaded stud470 - 130Castor wheels470 - 130Castor wheels425 - 003Motor217 - 043Terminal blocks© GBC Pro - Tech April 1999 Page 3 - 7

© GBC Pro - Tech April 1999 Page 3 - 8700 - 013Saddle, idler757 - 031Support, bridge, fan710 - 105Shaft, crank, pull roll lift001 - 556Assembly, bridge, fan425 - 003Motor175 - 000Grommet645 - 011Threaded studs770 - 004Tie bar470 - 130Castor, wheels700 - 009Saddle, unwind770 - 004Tie barDrive Side770 - 004Tie bars001 - 394Assembly, idler, tension545 - 010Cover, main roll slot230 - 006Infrared sensor001 - 394Assembly, idler, tension700 - 009Saddle, unwind757 - 029Support, bridge, front700 - 009Saddle, unwind470 - 130Castor, wheels175 - 000Grommet700 - 014Saddle, idler, anti-static175 - 000Grommet230 - 006Infrared sensor001 - 394Assembly, idler, tension001 - 396Assembly, brake, unwind, lower757 - 029Support, bridge, front001 - 396Assembly, brake, unwind, lower645 - 011Threaded studs470 - 130Castor, wheelsControl Side770 - 004Tie bars001 - 394Assembly, idler, tension770 - 004Tie bar001 - 158Assembly, brake, unwind, top757 - 031Support, bridge, table001 - 556Assembly, bridge, fan175 - 000Grommet465 - 015Pull handle770 - 004Tie bar470 - 130Castor, wheelsGBC Pro - Tech Parts ManualF 60+ : Bridge & Inside Parts

R© GBC Pro - Tech April 1999 Page 3 - 9* NOT PART OF THISASSEMBLY510 - 223UNWIND CLEVIS* FOR PART NUMBERREFERENCE ONLY510 - 223UNWIND CLEVISUDETAIL ADISC SPRING ORIENTATION3X SCALEREQ'DDESCRIPTION215425362507116611610937GTS4-8-96RLM1-25-P.R 9611-01- .P.R 9510-26- .95RAS3-03-95REVISIONEDCBASHEET 1 OF89UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .0051TITLE:367PART NO.1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 41 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 KNOB, ADJUSTMENT, BRAKE 465-020 9SEE DETAIL A211-15-DATE:DRAWN BY:94 RARELEASENO.SPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, BRAKE-SCALE:1/1SIZE:CDwg:ITEM001-158GBC Pro - Tech Parts ManualF 60+ : 001 - 158 Unwind Brake, Upper

© GBC Pro - Tech April 1999 Page 3 - 1011Solder21SolderREQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 METAL-OXIDE VARISTOR 185-006 22 SHRINK TUBE, 1/8 DIA. BY 1.0" 180-425 31 SHRINK TUBE, 0.5" DIA. BY 0.85" 180-450 4REVISIONApply a heat shrink tube after solderingThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY. MOV FOR O-III SSR, F 60DATE: DRAWN BY: DWG SCALE:3-26-96 HZ A134Dwg:001-342GBC Pro - Tech Parts ManualF 60+ : 001 - 342 M.O.V.

© GBC Pro - Tech April 1999 Page 3 - 11PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH1.SOLDER SPEC: WAVE SOLDERING2.UL SPEC: UL 796,SEVENTH EDITIONCREQ'D DESCRIPTION PART NO. ITEM1 PARTS LIST SPEC. DOC 001-374.xls 11 TEST AND CALIB.DOC 820-050. 21 SCHEMATIC 810-022 31 FABRICATED PCB 671-005 4REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4-30-97 DRAWN BY: SCALE:RELEASENO.2032GTS 1/1RPRO-TECHASSY, FORCE GAUGE PCB-SIZE:ADwg:001-374GBC Pro - Tech Parts ManualF 60+ : 001 - 374 PCB, Force Guage

© GBC Pro - Tech April 1999 Page 3 - 12DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH41.0REFPROPRIETARYC3REQ'D32 132DESCRIPTIONPRESS INTO - 2 -CENTER ON -2-TIGHTEN SET SCREWS AGAINST SHAFT.2DJG11/16/98 3210AJH10/1/98 3183REVISIONBASHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWNAS TOL. FINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.E2-26-974151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:AJHRPRO-TECHAssembly, idler, powdercoatedF 601236PART NO.2 BEARING, IDLER 020-100 11 IDLER, 2" X 64", POWDER COATED 620-406 21 SHAFT, IDLER ROLL 710-080 31SCALE:1/11SIZE:BDwg:ITEM001-394DCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 394 Idler, Tension, Powder Coated

R© GBC Pro - Tech April 1999 Page 3 - 13PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C510 - 223Unwind clevis* Not part of thisassembly !For part numberreference only !510 - 223Unwind clevisUDETAIL ADISC SPRING ORIENTATION3X SCALE13152REQ'DDESCRIPTIONPART NO. ITEM1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 41 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 STUD 645-024 91 UNWIND DIAL 625-018 101 3/8 WASHER STK 111 3/8 NYLOC NUT STK 121 3/8 NUT STK 139812 11367SEE DETAIL A22872AJ7-17- H97REVISIONA10APPLY ANTI-SIEZE COMPOUND1.44SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDPRO-TECHTOLERANCEDIM. AS4151 Anderson Road, DeForest, Wisconsin 53532SHOWNTOL.FINISHPhone (608) 246-8844 Fax (608) 246-8645TO BEX/X P 1/64TITLE:125X. P .050ASSEMBLY, BRAKEX.X P .020DS-60, F-602-24-X.XX P .010 ANGLES DATE: DRAWN BY: SCALE: SIZE: Dwg:97P 1DAJX.XXX P .005RELEASE1/1NO.1231 HCA001-396GBC Pro - Tech Parts ManualF 60+ : 001 - 396 Unwind Brake, Lower

© GBC Pro - Tech April 1999 Page 3 - 1454PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH.45REF1 2BACNREQ'DDESCRIPTIONPART NO. ITEM1 BRACKET, HALL SENSOR 510-226 12 PLATE 672-020 21 MAGNET 475-701 31 #10-32 SHCS - 41 #10-32 NYLOC NUT - 5-- BLACK MAX 380 ADHESIVE - 627992767AJH6-3-97AJH5-19-97REVISIONBA3SHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXLOCATE MAGNET NORTHPOLE AT TOP OF THIS VIEW.TOL.P 1/64P .050P .020P .010P .005WRITE "N" HERE WITH PERMANENTINK MARKER.61FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4-22-97 DRAWN BY: SCALE:RELEASENO.1404AJH 1/1RPRO-TECHASSY, MAGNET/FORCE SENSORF-60/DS-60SIZE:ADwg:001-437GBC Pro - Tech Parts ManualF 60+ : 001 - 437 Magnet, Force Guage

© GBC Pro - Tech April 1999 Page 3 - 15DCB4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH411C9 1038 7SHEET 1 OF 1UNLESS OTHERWISE213TOLERANCSPECIFIEDEDIM.SHOWN AS TOL. FINISHA X/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX31251364REQ'D22DESCRIPTIONREVISIONTITLE:DATE:RELEASNO.E4-24-97DRAWNBY:MAARSCALE:1:11PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-86451363PART NO.1 PLUG, CLUTCH, ORCA I X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SNAP RING, 1" SHAFT 090-140 71 SPRING, 1" ID X 3/8 LG 089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 112 THRUST WASHER 032-300 121 USS F/W 7/16 - 131SIZE:BDwg:ITEMREWIND, BRAKEF-60, DS-60001-439DCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 439 Rewind Brake

R© GBC Pro - Tech April 1999 Page 3 - 16DCBA4 3 2PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4.02 343 2C3.0REQ'D11.05.0 2.0 8.01DESCRIPTIONNOTES:1. CUT EACH SECTION TO THE DIMENSION SHOWN.2. ITEM 1 IS CUT INTO 5" AND 8" SECTIONS. WHEN INSTALLED, A 2" GAP ISLEFT BETWEEN THEM AND THE 15" COVER FITS OVER BOTH SECTIONS.SEE NOTE 2315.03 2 1REVISIONSHEET 1918 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX1TOL.P 1/64P .050P .020P .010P .005PART NO.13" WIRE DUCT 1" X 1" CHANNEL W/ ADHESIVE 180-110 115" WIRE DUCT 1" X 1.5" CHANNEL W/ ADHESIVE 180-140 230" WIRE DUCT COVER, 1" 180-130 3FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.2-27-981PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645WIRE DUCT ASSEMBLYF-601918DRAWN BY: SCALE: SIZE:BJT 1:1 CITEMDwg:001-483DCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 483 Wire Duct

© GBC Pro - Tech April 1999 Page 3 - 17PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC(.059)1.0231REQ'D1 FLAT 672-021 11 TRANSDUCER,HALL EFFECT 185-007 21 TERMINAL 3 LEAD 217-001 3REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX(.21)(2.00)TOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DBLACK MAX 380TITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 3/31/98 DRAWN BY: SCALE:RELEASENO.1945AJH 1/1RPART NO.PRO-TECHASSEMBLY, FORCE SENSORSIZE:ADwg:ITEM001-504GBC Pro - Tech Parts ManualF 60+ : 001 - 504 Sensor, Force Guage

© GBC Pro - Tech April 1999 Page 3 - 18PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC(4.03)(1.0)REQ'DDESCRIPTIONPART NO. ITEM1 GUIDE BRACKET 595-012 11 TRANSDUCER ASSY 001-504 22 #4-40 x 1/8 BHSCS STK 321REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:DATE: 3/31/98RELEASENO.194634151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RPRO-TECHFORCE SENSOR ASSYF60/DS60SCALE:AJH 1:2SIZE:ADwg:001-505GBC Pro - Tech Parts ManualF 60+ : 001 - 505 Sensor, Force Guage

© GBC Pro - Tech April 1999 Page 3 - 19DCB4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C312 3 45 4 3 2 1SHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWNASFINISHA X/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX3REQ'D2DESCRIPTION23161D.G.8-27-98REVISIONATITLE:DATE:RELEASNO.E4/20/98DRAWNBY:AJHR1PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, TERMINAL BLOCK-1984PART NO.7 TERMINAL, GRAY, 4mm 217-120 11 TERMINAL,GROUND,4mm 217-140 21 RAIL END 217-170 31 DIN RAIL 217-033 4SCALE:1/11SIZE:BDwg:ITEM001-509DCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 509 Terminal Strip

© GBC Pro - Tech April 1999 Page 3 - 20PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHNOTE:ITEM 2 MUST PIVOT FREELYCAREQ'D1 2 3DESCRIPTIONPART NO.1 CHUCK,CORE 530-023 13 BLOCK,PIVOT 501-036 23 PIN,DOWEL,1/8 DIA X 3/4 095-102 31 SET SCREW,BRASS,3/8-16 X 3/8 050-022 4REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,CORE CHUCK,QUICK RELEASEDATE: 4/17/98 DRAWN BY: SCALE:RELEASENO.1981AJH 1/1RPRO-TECHSIZE:A4LIGHT COATOF DOW 44Dwg:ITEM001-510GBC Pro - Tech Parts ManualF 60+ : 001 - 510 Core Chucks

© GBC Pro - Tech April 1999 Page 3 - 21PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC5 EA CONNECTED SET5A0C* BRIDGE BARS ARE PURCHASED ININTERCONNECTED 10-SETS. CUT ANDPOSITION THE INTERCONNECTED-COUNTSAS SHOWN IN THE VIEW(S).MAKE SHOWN BRIDGE BAR SETS FROMFLOOR STOCK.4C51 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2 0 21 22236 EA CONNECTED SETCCBABAREQ'D DESCRIPTIONPART NO. ITEM1 DIN RAIL 217-212 12 END BLOCK,E/MK2 185-020 224 TERMINAL,MINI,MBK 2.5/E 185-022 34 PARTITION PLATE,ATP-MBK 217-042 4* BRIDGE BAR,FIXED,FBRNI 10-5 N 217-021 51 MARKER SET, 24VDC DISTRI 217-094 6AJH3/18/99 3285D.G.7-10-98 3146D.G.6-24-98 3142REVISIONCB5A2 EA CONNECTED PAIR(5) PLACES CB3SHEET 1983 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXBTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:6RELEASENO.24/17/981DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,TERMINAL BLOCK (28)F601983SCALE:SIZE:AJH 1:1 ADwg:001-512GBC Pro - Tech Parts ManualF 60+ : 001 - 512 Terminal Strip

© GBC Pro - Tech April 1999 Page 3 - 22PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCCCAAREQ'DDESCRIPTIONPART NO. ITEM1 FUSE, 250V, 20 AMP, CERAMIC 186-135 12 FUSE, 2.5 AMP 186-220 21 MANUAL 930-023 31 BOX 475-010 41 TOWEL 475-950 51 ZIPPY KNIFE 475-620 61 MASKING TAPE 475-000 71 RUBBER CEMENT PICKUP 930320 84 MOUNT, MACHINE, ZSW-IV 470-101 91 STRAIN RELIEF, MAIN POWER 175-201 101 FUSE, 0.5 AMP 186-016 112 LINKAGE, CRANKHANDLE 629-018 122 BHSCS 3/8-16 X 5/8 - 13A 1 WRENCH, 3/16 ALLEN 475-200 14B2 O-RING 480-005 15REVISIONC 3306 4-9-99 BHSCS 3/8-16 X 1/2 QTY 1AJH ADD O-RINGS.B 3290 3/24/99BJT ADDED 629-018 QTY 1, 475-200 QTY 1, BHSCS 3/8-16 X 1/2A 3249 1-26-99 QTY 1 TO BILL OF MATERIALREV ECN BY DESCRIPTIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125BJTANGLESP 1D629-018 QTY 2 WAS QTY 1, BHSCS 3/8-16 X 5/8 QTY 2 WASTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 11/11/98 DRAWN BY: SCALE:RELEASENO.2260AJH 1/1RPRO-TECHACCESSORY KIT, F-60 PLUS-SIZE:ADwg:001-551GBC Pro - Tech Parts ManualF 60+ : 001 - 551 Accessory Pack

N© GBC Pro - Tech April 1999 Page 3 - 23DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C117 158910A335231612 131444111.0 A67A 3249A 3249REVSHEET ECN12REQ'DDESCRIPTIONPART NO. ITEM1 BLOCK, GEAR PULL ROLL 501-040 11 GEAR,HELI,RH,MOD 570-003 21 SCRW,ACME,MOD 645-001 32 BUSH,BRNZ,FLG,.75,1,.75 /FB1216-5 040-008 42 BUSH,BRZ,FLG,.62,.75,.50 /FB1012-4 040-001 51 BLK,BRG,ROLL,MAIN,UPR 501-003 61 BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8 040-009 71 BLOCK,SPRING,PLATE,BEARING 501-004 82 SPRING,COMPRESSION,536LBS/in 089-004 92 STRIP 3/8 x 1 1/4 STOCK 101 THRUST WASHER, TB-1220 032-002 111 GEAR, HELICAL, RH, 16H524R 430-006 121 KEY 3/16 SQ X 1/2 STOCK 132 SPRING CLIP, 5100-75 090-135 141 BLOCK, SUPPORT, PULL ROLL 501-041 151 SHAFT, HELIC GEAR, PULL ROLL 710-104 164 SHCS 1/4-20 X 3/4 LONG STOCK 172REVISIOBJ1-22- TBJ 991-22- T99BY1OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOLSHOW ASFINIS.NTO HX/ P 1/BEX 6412X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .0051CORRECTED FASTENER CALLOUT FOR ITEMREVISED DRAWING TO 17 REFLECT CHANGES TO 501-040 AND 501-DELETED 4.19, ADDED 1.0, DRAWING 041, SCALE WASINCORRECT.TITLE:DATE:RELEASENO.F-60+4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-864511-23-982272DESCRIPTIONR PRO-TECHASSY,LFTR, PULLROLLDRAWN SCALEBY::AJH 1/2ASIZE:CDwg:001-552DCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 552 Pull Roll Lift, Drive

NR© GBC Pro - Tech April 1999 Page 3 - 24DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH41113 12144164C89B1033523115 171.0 B67B 3249B 3249REVSHEET ECN12REQ'DDESCRIPTIONPART NO. ITEM1 BLOCK, GEAR PULL ROLL 501-040 11 GEAR,HELI,RH,MOD 570-003 21 SCRW,ACME,MOD 645-001 32 BUSH,BRNZ,FLG,.75,1,.75 /FB1216-5 040-008 42 BUSH,BRZ,FLG,.62,.75,.50 /FB1012-4 040-001 51 BLK,BRG,ROLL,MAIN,UPR 501-003 61 BUSH,BRNZ,FLNG,1.25,1.5,1 /FB2024-8 040-009 71 BLOCK,SPRING,PLATE,BEARING 501-004 82 SPRING,COMPRESSION,536LBS/in 089-004 92 STRIP 3/8 x 1 1/4 STOCK 101 THRUST WASHER, TB-1220 032-002 111 GEAR, HELICAL, RH, 16H524R 430-006 121 KEY 3/16 SQ X 1/2 STOCK 132 SPRING CLIP, 5100-75 090-135 141 BLOCK, SUPPORT, PULL ROLL 501-041 151 SHAFT, HELIC GEAR, PULL ROLL 710-104 164 SHCS 1/4-20 X 3/4 STOCK 172REVISIOBJ1-22- TBJ 991-22- T99BY-OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINIS.NTO HX/ P 1/BEX 6412X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .0051CORRECTED FASTENER CALLOUT FOR ITEMREVISED DRAWING TO17REFLECT CHANGES TO 501-040 AND 501-DELETED 4.19, ADDED 1.0, DRAWING 041, SCALE WASINCORRECTTITLE:DATE:RELEASENO.F-60+4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-864511-23-982273DESCRIPTIONPRO-TECHASSY,LFTR,PULLROLLDRAWN SCALEBY::AJH 1/2BSIZE:CDwg:001-553DCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 553 Pull Roll Lift, Control

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THEDRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDMANUFACTURE OR FOR ANY FOR OTHER PURPOSE WITHOUTPERMISSION WRITTEN FROM GBC PRO-TECHCSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125TITLE:ANGLES DATE: #REF!P 1DRELEASE#REF!NO.4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RSCALE: SIZE: Dwg:© GBC Pro - Tech April 1999 Page 3 - 25HGFEDCBA8PROPRIETARY74AIR FLOW655REQ'D8 7 6 5 4 3 2 114AIR FLOW AIR FLOW AIR FLOW AIR FLOW AIR FLOW233DESCRIPTION26PART NO.1 BRIDGE, FAN 757-030 16 FAN, MUFFIN, 230V, 4" 182-101 26 GUARD, MUFFIN FAN, 4" 182-011 31 WIRE HARNESS, DAISY CHAIN 201-000 46 CABLE TIE BASE 175-004 512 SCREW, PAN, #6-32 X 2 - 6NOTES:1. APPLY BLUE LOC-TITE TO ALL FASTENERS.REVISION1PRO-TECHASSEMBLY, BRIDGE,F - 60 FAN+1/BJT2 EITEM001 -556HGFEDCBAGBC Pro - Tech Parts ManualF 60+ : 001 - 556 Bridge, Fans

© GBC Pro - Tech April 1999 Page 3 - 26PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCNOTES:1. PARTS ARE SHIPPED LOOSE.1A3373526AAAAAINSULATING SLEEVE(REMOVED)REQ'D4 SPACER, HEATER SPRING 755-061 14 SPRING 089-022 2- SLEEVE, INSULATING 180-006 38 CABLE TIE, 8" STOCK 41 INSTRUCTIONS, HEATER TENSION 820-063 5AJH7/20/98 3148AREVISIONSHEET 1937 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONFINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.3-21-98DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645KIT, HEATER TENSIONF 601937SCALE:PART NO.4 #10 EXTERNAL LOCK WASHERS - 6434SIZE:BJT 1:1 ADwg:ITEM005-028GBC Pro - Tech Parts ManualF 60+ : 005 - 028 Heater Tensioning Kit

PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCBJT2-9-99BJT1-22-99REPLACED 130-001 WITH 130-002, REMOVED 100-026-040-048 REPLACES 040-016-SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDRTOLERANCEDIM. AS4151 Anderson Road, DeForest, Wisconsin 53532TOL.SHOWNFINISHPhone (608) 246-8844 Fax (608) 246-8645TO BEX/X P 1/64TITLE:125X. P .050X.X P .020X.XX P .010 ANGLES DATE: 12-7-98 DRAWN BY: SCALE: SIZE: Dwg:P 1DX.XXX P .005RELEASE 2291NO.© GBC Pro - Tech April 1999 Page 3 - 27DCBA87* Top and bottom rewind driveassemblies are identical in partnumbers. The sprocket ( 435 - 175 )is reversed for the top rewind drivecompared to the bottom rewinddrive.032-011THRUST BEARING, NTA-2233435-175SPROCKETNUT, 5/8-11 NYLOCKKEY STOCK, 3/16 X 3/16 X 1/2032-012THRUST WASHER, TRD-2233032-260THRUST WASHER, TRB-22336020-110BALL BEARINGWASHER, 3/4, SAE FLAT001-261ASSY, REWIND CLUTCH DRIVE032-170 THRUST WASHER, TRA-1018032-150 THRUST BEARING, NTA-1018032-170 THRUST WASHER, TRA-10188 7 6 5 4 3543032-011THRUST BEARING, NTA-2233435-175SPROCKETNUT, 5/8-11 NYLOCKKEY STOCK, 3/16 X 3/16 X 1/2032-012THRUST WASHER, TRD-2233032-260THRUST WASHER, TRB-2233REQ'D2REVISIONF 3264E 3249DESCRIPTION020-110BALL BEARINGWASHER, 3/4, SAE FLATREV ECN BY DESCRIPTIONMACHINE ASSEMBLYF-60+ STAND PARTSPART NO.001-261ASSY, REWIND CLUTCH DRIVE032-170 THRUST WASHER, TRA-1018032-150 THRUST BEARING, NTA-1018032-170 THRUST WASHER, TRA-10182 11PRO-TECHSNF 1:5 DITEM076-001DCBAGBC Pro - Tech Parts ManualF 60+ : 076 - 01 Assembly, Rewind Drive ( CNO )

SHEET #REF! OF #REF!UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64TITLE:125X. P .050X.X P .020X.XX P .010 ANGLES DATE:P 1DX.XXX P .00504/15/99#REF!4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645EDITED BY :RSCALE:SIZE:Dwg:© GBC Pro - Tech April 1999 Page 3 - 28DCBA8PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH501-025BEARING BLOCK690-059ROLL, 5" RUBBER, MAIN710-084SHAFT, LIFT TORQUE020-007BEARINGBEARING BLOCK ASSEMBLY(TOP VIEW)C7ZERKFITTING755-070SPACER755-053SPACER6040 - 035BUSHING510-317TABLE BRACKETDETAIL: TABLE BRACKET MOUNTING(TOP VIEW)5755-053SPACER, TABLE BRACKET020-100BALL BEARING755-053SPACER026-000BEARING620-406IDLER, 2 X 64, POWDER COATED020-007BLOCK, ROLL BEARING501-035BLOCK, ROLL BRG GIB026-004BUSHING026-000BEARING, FLANGED510-317TABLE BRKT629-018LINKAGE, CRANKHANDLE710-103SHAFT, CRANK4501 - 025BEARING, MAIN ROLL UPPER629-010LINK,ROLL PIVOT AXLE629-009LINK, ROLL BRG BLK629-011LEVER, ROLL LIFT629 - 010LINK, ROLL, PIVOT430-005GEAR, WORM290-280CLAMP COLLAR501 - 039BLOCK, CRANKSHAFT040 - 049BUSHING ( FLANCE ON WORM SIDE8 7 6 5 4 332501-028BLOCK, ROLL LIFTREVISION095-103PIN, DOWEL001-505FORCE SENSOR ASSY629-012LINK, LIFT ROD040-003BUSHING, BRONZE629 - 014LEVER, CLAMP ASSEMBLYRELEASENO.430-008WORMSNFPRO-TECHASSEMBLY, MAIN ROLL LIFTFALCON 60+2 11089-018SPRING, DIE290 - 260LOCK COLLAR501 - 027BLOCK, ROLL BEARING, GIB325 - 210CLEVIS, D-231-3076 - 003DCBAGBC Pro - Tech Parts ManualF 60+ : 076 - 03 Assembly, Main Roll Lift ( CNO )

GBC Pro - Tech Parts ManualDye Sub 60Illustrated Parts Diagrams( 000 - 052 )Available Options :005 - 041 ( Positive Rewind )© GBC Pro - Tech April 1999 Page 4 - 1

© GBC Pro - Tech April 1999 Page 4 - 2450 - 180Decal, High voltage450 - 110Decals, E-Stop214 - 290Switch, auto/stop450 - 073Decal, auto/stop450 -134Decal, crush/burn450 - 132Decal, moving parts470 - 130Castor wheelsDrive SideDS-60645 - 011Threaded rods520 - 051Cover, cabinet, drive450 - 071Decal, DS-60520 - 050Cabinet, drive214 - 313Push buttons, E-Stop545 - 014Cover, main roll slot450 - 136Decal, read safety001 - 451Accessory kit520 - 052Cover, cabinet, control001 - 421Assembly, control panel465 - 034Crank handle450 - 078Decal, roll lift450 - 071Decal, DS-60520 - 049Cabinet, controlControl SideDS-60186 - 000Holders, fuse186 - 002Fuse carriers(3) 186 - 200Fuses, 3 amp186 - 011Circuit breaker175 - 180Strain relief, 1/2"450 - 180Decal, High voltage214 - 313Push buttons, E-Stop214 - 314Contact, E-Stop450 - 135Decal, read instructions450 - 062Decal, reset214 - 008Push button, reset465 - 015Handles, pull450 - 015Decal, serial plate450 - 031Decal, CE175 - 190Strain relief, 3/4"GBC Pro - Tech Parts ManualDS 60 : Side Cabinets & Covers

GBC Pro - Tech Parts ManualDS 60 : Front / Rear viewsFront View585 - 059Guard450 - 155Decal, danger001 - 439Assembly, rewind brake214 - 313Push button, E-Stop770 - 004Tie bars690 - 056Main roll, chrome690 - 055Main roll, rubber001 - 432Assembly, rewind, drive001 - 421Assembly, control panel001 - 397Assembly, pivot idlers001 - 394Assembly, idler860 - 014Rewind tube001 - 432Assembly, rewind, drive700 - 009Saddle, unwind465 - 034Crank handle001 - 396Assembly, unwind brakes001 - 439Assembly, rewind brake001 - 396Assembly, unwind brakes470 - 130Castor, wheels470 - 130Castor, wheels770 - 004Tie bars530 - 022Support, core001 - 457Assembly, core chucks710 - 076Shaft, unwind050 - 022Set screw450 - 099Decal, forkliftRear View770 - 004Tie bars240 - 120Thermo-couple005 - 024Spring kit, thermo-couple214 - 313Push button, E-Stop001 - 439Assembly, rewind brake214 - 290Switch, auto/stop001 - 394Assembly, idler214 - 008Push button, reset425 - 003Motor186 - 011Circuit breaker465 - 015Handle, pull001 - 432Assembly, rewind, drive001 - 439Assembly, rewind brake470 - 130Castor, wheels470 - 130Castor, wheels770 - 004Tie bars710 - 084Shaft, lift torque860 - 014Tube, rewind© GBC Pro - Tech April 1999 Page 4 - 3

P3P2 P1 I1 F+ F-L1 L2 A+ A-14OUTPUTINPUT23GBC Pro - Tech Parts ManualDS 60 : Control Side180 - 110Wire duct180 - 130Cover, wire duct001 - 463Assembly, terminal strip465 - 034Crank handle026 - 000Bearing, flanged052 - 03Assembly, main roll lift250 - 004Photo-eye001 - 396Assembly, unwind brake189 - 033Heater510 - 243Bracket, heater, control001 - 505Assembly, force guage sensor520 - 049Cabinet, control760 - 056Table, rear001 - 504Assembly, sensor, force guage001 - 437Assembly, magnet, force guage175 - 008Standoff, pan pole430 - 005Gear, worm290 - 660Collar, unwind shafts470 - 130Castor, wheels001 - 485Assembly, electrical panel182 - 000Fan, ssr645 - 011Threaded rods001 - 173Assembly, power cord© GBC Pro - Tech April 1999 Page 4 - 4

© GBC Pro - Tech April 1999 Page 4 - 5217 - 250Cover, jumper bar, 4mm217 - 140Terminal, ground, 4mm217 - 270Terminals, 4mm, blue217 - 240Jumper bar, 4mm207 - 007Relay base207 - 006Relay, 24 vdc245 - 205Power supply217 - 003Din rail, 3.5"-OUT-5+5+OUT217 - 170Rail end001 - 447Assembly, PCB185 - 032Filter, motor3 1 12J3 J44 2 6220 - 110Barrier board11510 9 8 74 3 2 1280 - 036Wire harness220 - 160Motor controller boardP3P2 P1 I1 F+ F-186 - 135Fuses, 20 ampL1 L2 A+ A-4 3J2 2 1207 - 003Covers, SSR's1 2OUTPUTINPUT4 3220 - 130HP resistor207 - 005SSR's, Carlo Gavazzi207 - 189Relay, safety, Crouzet185 - 005Rectifier, std recovery217 - 170Rail ends217 - 003Din rail, 3.5"217 - 140Terminal, ground, 4mm217 - 120Terminals, 4mm, grey217 - 215Cover, terminal, 10mm217 - 220Terminals, 10mm217 - 170Rail ends217 - 003Din rail, 3.5"001 - 342Assembly, MOV's210 - 010Contactor, Siemens, 24vdc217 - 170Rail ends670 - 028Panel, electricalGBC Pro - Tech Parts ManualDS 60 : 001 - 485 Electrical Panel

GBC Pro - Tech Parts ManualDS 60 : Front & Rear Panels001 - 421 Front Control Panel001 - 421Assembly, control panel450 - 068Overlay, control panel230 - 007Temp controller10090001 - 374Assembly, PCB, force guage%8070605040302010OI214 - 296Cover, switch, black214 - 270Switch, on/off219 - 000Rate/Totalizer465 - 031Knob, speed control00000000214 - 296Cover, switch, black220 - 161Potentiometer+OI214 - 010Switch, DBL pole214 - 290Switch, run/stop214 - 270Switch, auto/footOI214 - 295Cover, switch, red/green214 - 296Cover, switch, black214 - 012Push button, resetRear Control PanelI450 - 073Decal, run/stop214 - 290Switch, run/stopO214 - 295Cover, switch, red/green© GBC Pro - Tech April 1999 Page 4 - 6

GBC Pro - Tech Parts ManualDS 60 : Drive Side052 - 03Assembly, main roll lift435 - 175Sprocket, rewind005 - 043Heater tension kit545 - 014Cover, main roll slot175 - 008Standoff, pan pole026 - 000Bearing, flanged750 - 006Sprocket, motor001 - 428Assembly, adjustable tensioner435 - 175Sprocket, rewind219 - 001Indicator, proximity470 - 130Castor, wheels510 - 227Bracket, heater, drive435 - 015Bushing, taperlock435 - 012Sprocket, main roll400 - 005Chain, drive425 - 003Motor400 - 006Chain, rewind440 - 125Sprocket, adjustable, tensioner520 - 050Cabinet, drive645 - 011Threaded stud© GBC Pro - Tech April 1999 Page 4 - 7

© GBC Pro - Tech April 1999 Page 4 - 8510 - 240Cap, table bracket510 - 242Bracket, table, drive760 - 056Table, rear520 - 054Rear table001 - 394Assembly, idler425 - 003Motor175 - 000Grommet520 - 053BridgeDrive Side465 - 030Bumper770 - 004Tie bar770 - 004Tie bar 770 - 004Tie bar001 - 393Assembl, idlers001 - 397Assembl, pivot idlers465 - 030Bumper001 - 394Assembly, idler700 - 009Saddle770 - 004Tie bar001 - 393Assembl, idlers001 - 397Assembl, pivot idlers465 - 030Bumper001 - 394Assembly, idler001 - 396Assembly, unwind brakes770 - 004Tie barControl Side465 - 030Bumper510 - 240Cap, table bracket510 - 241Bracket, table, control520 - 054Rear table001 - 394Assembly, idler520 - 053Bridge770 - 004Tie bar760 - 056Table, rear465 - 015Handles, pull470 - 130Castor, wheels 470 - 130Castor, wheelsGBC Pro - Tech Parts ManualDS 60 : Bridge & Inside Parts

© GBC Pro - Tech April 1999 Page 4 - 93/81-1/22REQ'D DESCRIPTIONPART NO. ITEM1 PLUG,POWER,30AMP,250V 201-200 112 CABLE,POWER,10/3 270-105 2U12'1REVISIONX/XX.X.XX.XXX.XXXGREENUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DGWHITE/LT BLUEThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.TITLE:YXBLACK/BROWNPro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,CABLE,POWERFALCON-36DATE: DRAWN BY: DWG SCALE:9-27-94 RAS C1Dwg:001-173GBC Pro - Tech Parts ManualDS 60 : 001 - 173 Power Cord

© GBC Pro - Tech April 1999 Page 4 - 1011Solder21SolderREQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 METAL-OXIDE VARISTOR 185-006 22 SHRINK TUBE, 1/8 DIA. BY 1.0" 180-425 31 SHRINK TUBE, 0.5" DIA. BY 0.85" 180-450 4REVISIONApply a heat shrink tube after solderingThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY. MOV FOR O-III SSR, F 60DATE: DRAWN BY: DWG SCALE:3-26-96 HZ A134Dwg:001-342GBC Pro - Tech Parts ManualDS 60 : 001 - 342 M.O.V.

© GBC Pro - Tech April 1999 Page 4 - 11PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH1.SOLDER SPEC: WAVE SOLDERING2.UL SPEC: UL 796,SEVENTH EDITIONCREQ'D DESCRIPTION PART NO. ITEM1 PARTS LIST SPEC. DOC 001-374.xls 11 TEST AND CALIB.DOC 820-050. 21 SCHEMATIC 810-022 31 FABRICATED PCB 671-005 4REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4-30-97 DRAWN BY: SCALE:RELEASENO.2032GTS 1/1RPRO-TECHASSY, FORCE GAUGE PCB-SIZE:ADwg:001-374GBC Pro - Tech Parts ManualDS 60 : 001 - 374 PCB, Force Guage

© GBC Pro - Tech April 1999 Page 4 - 12DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4PROPRIETARYC3REQ'DREMOVE SET SCREW(S) FROM THIS END.32 12DESCRIPTIONH3139H2787H2764AJ6/26/98AJCB2BALOCK SET SCREW ON THIS END ONLYUSING LOC-TITE, BLUE..185-28-97AJ5-17-97REVISION3ASHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWNASFINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.EC2-21-974151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY, IDLERDS-601233PART NO.2 BEARING, IDLER 020-100 11 IDLER, 2 X 64, CHROME 620-405 21 SHAFT, IDLER ROLL 710-079 3DRAWNBY:AJHR1PRO-TECHSCALE:1/11SIZE:ADwg:ITEM001-393DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 393 Idler, Pivot Idlers

© GBC Pro - Tech April 1999 Page 4 - 13DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH1.0REF4PROPRIETARYC3REQ'D32 132DESCRIPTIONPRESS INTO - 2 -CENTER ON -2-TIGHTEN SET SCREWS AGAINST SHAFT.2DJG11/16/98 3210AJH10/1/98 3183REVISIONBASHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWNAS TOL. FINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.E2-26-974151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:AJHRPRO-TECHAssembly, idler, powdercoatedF 601236PART NO.2 BEARING, IDLER 020-100 11 IDLER, 2" X 64", POWDER COATED 620-406 21 SHAFT, IDLER ROLL 710-080 31SCALE:1/11SIZE:BDwg:ITEM001-394DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 394 Idler, Tension, Powder Coated

R© GBC Pro - Tech April 1999 Page 4 - 14PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHUDETAIL ADISC SPRING ORIENTATION3X SCALE4C510 - 223Unwind clevis* Not part of thisassembly !For part numberreference only !510 - 223Unwind clevis21315REQ'D8912 11367SEE DETAIL A2DESCRIPTION1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 42872AJ7-17- H97REVISIONA10APPLY ANTI-SIEZE COMPOUND1.44PART NO.1 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 STUD 645-024 91 UNWIND DIAL 625-018 101 3/8 WASHER STK 111 3/8 NYLOC NUT STK 121 3/8 NUT STK 13SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDPRO-TECHTOLERANCEDIM. AS4151 Anderson Road, DeForest, Wisconsin 53532SHOWNTOL.FINISHPhone (608) 246-8844 Fax (608) 246-8645TO BEX/X P 1/64TITLE:125X. P .050ASSEMBLY, BRAKEX.X P .020DS-60, F-602-24-X.XX P .010 ANGLES DATE: DRAWN BY: SCALE: SIZE: Dwg:97P 1DAJX.XXX P .005RELEASE1/1NO.1231 HCAITEM001-396GBC Pro - Tech Parts ManualDS 60 : 001 - 396 Unwind Brake, Lower

© GBC Pro - Tech April 1999 Page 4 - 15DCBA44REQ'D33DESCRIPTION1 OPPOSITE10112 SHOWN 386PART NO.2 FHSCS 5/8 - 18 X 1" STK 82 STRIP 1/2 DIA x 1 1/4 STK 94 SHIM 1/2 x 3/4 x 1/8 068-100 102 WASHER, NYLON 1/2 x 3/4 x 1/16 068-006 11ITEMA2REQ'D2AJH9-8-97REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX49TOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:3-11-97DATE: DRAWN BY: SCALE:RELEASEAJH 1/21238NO.R1PART NO.1 SUPPORT, PIVOT ROLLS, DRIVE 757-020 11 SUPPORT, PIVOT ROLLS, CONTROL 757-021 12 BUSHING, BRONZE FB3812-5 040-014 32 PLUNGER, RETRACTABLE 1/4 098-002 42 ASSEMBLY, IDLER 62 001-393 54 FHSCS 3/8 - 16 X 1" STK 62 SHAFT, HANDLE 710-081 72933APRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, PIVOT ROLLSDS-601SIZE:B75Dwg:ITEM001-397DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 397 Pivot Idlers

© GBC Pro - Tech April 1999 Page 4 - 16DCBA4PROPRIETARY4C43332REQ'D DESCRIPTION PART NO. ITEM1 SHFT,IDL,L5/SO1 440-110 11 SPRKT,35,13T,.5/358S13F 440-125 21 IDLER_BASE 440-002 31 HEX_HEAD_BOLT,5/16-18_X_.875 - 41 SHAFT_COLLAR - 51 SET_SCREW_10-32_X_.25 - 61 GREASE_ZERK - 771526APPLY BLUELOCTITE2APPLY BLUELOCTITEREVISIONSHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.EASSEMBLY,IDLER,ADJUSTABLECHAIN_F-60,DS-604-22-9713614151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:MAA1RPRO-TECHSCALE:1/11SIZE:BDwg:GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH001-428DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 428 Adjustable Chain Tensioner

© GBC Pro - Tech April 1999 Page 4 - 17DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH853671094C42331REQ'D2DESCRIPTION1 PLUG, CLUTCH DRIVE 001-261 11 WASHER, THRUST, .090 THK 032-420 21 WASHER, THRUST .030 THK 032-410 31 BEARING, THRUST 032-400 41 BUSHING, MODIFIED 500-009 51 KEY, 1/4 X 1/4 X 3/8 LG - 61 NYLOCK NUT, 5/8-11 - 71 SPROCKET, 35BS20x5/8 435-175 86 WASHER, THRUST, .090 THK 032-205 91 BEARING, THRUST 032-190 102D.G.1-28-98 3022REVISIONASHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.E4-23-974151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:MAARPRO-TECH1362SCALE:1:11PART NO.1SIZE:BDwg:ITEMASSY, REWIND, DRIVEF-60, DS-60001-432DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 432 Rewind Drive

© GBC Pro - Tech April 1999 Page 4 - 1854PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH.45REF1 2BACNREQ'DDESCRIPTIONPART NO. ITEM1 BRACKET, HALL SENSOR 510-226 12 PLATE 672-020 21 MAGNET 475-701 31 #10-32 SHCS - 41 #10-32 NYLOC NUT - 5-- BLACK MAX 380 ADHESIVE - 627992767AJH6-3-97AJH5-19-97REVISIONBA3SHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXLOCATE MAGNET NORTHPOLE AT TOP OF THIS VIEW.TOL.P 1/64P .050P .020P .010P .005WRITE "N" HERE WITH PERMANENTINK MARKER.61FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 4-22-97 DRAWN BY: SCALE:RELEASENO.1404AJH 1/1RPRO-TECHASSY, MAGNET/FORCE SENSORF-60/DS-60SIZE:ADwg:001-437GBC Pro - Tech Parts ManualDS 60 : 001 - 437 Force Guage Magnet

© GBC Pro - Tech April 1999 Page 4 - 19DCBGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH244PROPRIETARY111C9 108 733SHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHA X/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX31251364REQ'D22DESCRIPTIONREVISIONTITLE:DATE:RELEASNO.E4-24-97DRAWNBY:MAARSCALE:1:11PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-86451363PART NO.1 PLUG, CLUTCH, ORCA I X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SNAP RING, 1" SHAFT 090-140 71 SPRING, 1" ID X 3/8 LG 089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 112 THRUST WASHER 032-300 121 USS F/W 7/16 - 131SIZE:BDwg:ITEMREWIND, BRAKEF-60, DS-60001-439DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 439 Rewind Brake

© GBC Pro - Tech April 1999 Page 4 - 20DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C3REQ'D3DESCRIPTION22REVISIONSHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWNAS TOL. FINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DXTITLE:DATE:RELEASNO.E5-8-97PART NO.1 PARTS LIST SPEC.DOC 001-447.XLS -1 TEST AND CALIB.DOC 820-070 -1 SCHEMATIC 810-030 -1 FABRICATED PCB 617-011 -4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:GTSR1PRO-TECHSCALE:1/11SIZE:ADwg:ITEMCONTROL PCBF-60/DS-60001-447DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 447 PCB, Electrical Panel

© GBC Pro - Tech April 1999 Page 4 - 21PROPRIETARGBC PRO-TECH CLAIMS YPROPRIETARY RIGHTSMATERIAL DISCLOSED ON TO THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED, IN WHOLE OR IN PART, ORMANUFACTURE OR FOR USED ANY OTHER FOR PURPOSE WITHOUTPERMISSION WRITTEN FROM GBC PRO-TECHCREQ'DAJH3/24/99 3291REVISIOADESCRIPTIONNB 3303SHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDETOL.DIM.ASSHOWNX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .005BJT4-9-99FINISHTO BE125ANGLESP1D-TITLE:DATE:RELEAS5-1-97NO.E 14074151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWNBY:AJHPART NO.1 FUSE, 250V 20 AMP, CERAMIC 186-135 13 FUSE 186-200 21 MANUAL 930-006 31 BOX 475-010 41 TOWEL 475-950 51 ZIPPY KNIFE 475-620 61 MASKING TAPE 475-000 71 ALLEN WRENCH SET 475-230 84 MOUNT, MACHINE, ZSW-IV 470-101 92 O-RING 480-005 101 HANDLE, CRANK 465-034 111 SET SCREW, #8-32 X 1/4 - 12HANDLE AND SET SCREW FOR MAIN ROLL LIFT WASADDED.REV ECN BY DESCRIPTIONRPRO-TECHACCESSORY KIT, DS-60-SCALE:1/1SIZE:ADwg:ITEM001-451GBC Pro - Tech Parts ManualDS 60 : 001 - 451 Accessory Pack

© GBC Pro - Tech April 1999 Page 4 - 22PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC1 2 3NOTE:ITEM 2 MUST PIVOT FREELYAREQ'DDESCRIPTIONPART NO.1 CHUCK,CORE 530-024 13 BLOCK,PIVOT 501-036 23 PIN,DOWEL,1/8 DIA X 3/4 095-102 31 SET SCREW,BRASS,3/8-16 X 1/2 - 4PRESS FIT FROMTHIS SIDEREVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,CORE CHUCK,QUICK RELEASEDATE: 7-3-97 DRAWN BY: SCALE:RELEASENO.1489RLM 1/1R4PRO-TECHSIZE:ADwg:ITEM001-457GBC Pro - Tech Parts ManualDS 60 : 001 - 457 Core Chucks

© GBC Pro - Tech April 1999 Page 4 - 23DCBGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH(Ø0.126)44PROPRIETARY3222C224 2513333REQ'D3SHEE1616 OF 1TUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.A SHOWN AS TOL. FINISHX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX332DESCRIPTION2REVISIONTITLE:DATE:RELEASNO.E8-25-97DRAWNBY:AJHR1PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, TS3 TERMINAL STRIPF60/DS601616PART NO.4 JUMPER, TERMINAL BLOCK 185-014 14 TERMINAL BLOCK, 2-CONDUCTOR, CENTER 185-015 21 TERMINAL BLOCK, 2-CONDUCTOR, END 185-016 37 TERMINAL BLOCK, 4-CONDUCTOR, CENTER 185-017 41 ENDPLATE, TERMINAL BLOCK 185-018 5SCALESIZE::1:1 B1Dwg:ITEM001-463DCBAGBC Pro - Tech Parts ManualDS 60 : 001 - 463 Terminal Strip

© GBC Pro - Tech April 1999 Page 4 - 24PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC(.059)1.0231REQ'D1 FLAT 672-021 11 TRANSDUCER,HALL EFFECT 185-007 21 TERMINAL 3 LEAD 217-001 3REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX(.21)(2.00)TOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DBLACK MAX 380TITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 3/31/98 DRAWN BY: SCALE:RELEASENO.1945AJH 1/1RPART NO.PRO-TECHASSEMBLY, FORCE SENSORSIZE:ADwg:ITEM001-504GBC Pro - Tech Parts ManualDS 60 : 001 - 504 Sensor, Force Guage

© GBC Pro - Tech April 1999 Page 4 - 25PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC(4.03)(1.0)REQ'DDESCRIPTIONPART NO. ITEM1 GUIDE BRACKET 595-012 11 TRANSDUCER ASSY 001-504 22 #4-40 x 1/8 BHSCS STK 321REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:34151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 3/31/98 DRAWN BY: SCALE:RELEASE1946AJH 1:2NO.RPRO-TECHFORCE SENSOR ASSYF60/DS60SIZE:ADwg:001-505GBC Pro - Tech Parts ManualDS 60 : 001 - 505 Sensor, Force Guage

© GBC Pro - Tech April 1999 Page 4 - 26PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC2FASTENAL #24016FASTENAL #33070NOTES:1. PREASSEMBLE BEFORE PACKAGINGFOR SHIPMENT.41REQ'D DESCRIPTIONPART NO. ITEM1 SUPPORT, THERMOCOUPLE 757-026 11 SPRING 089-021 21 BHSCS #6-32 x 1/4 - 31 WASHER - 431 INSTALLATION INSTRUCTIONS 820-151 5REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 1/13/98 DRAWN BY: SCALE:RELEASENO.1833AJH 1/1RPRO-TECHKIT, THERMOCOUPLE SUPPORT-SIZE:ADwg:005-024GBC Pro - Tech Parts ManualDS 60 : 005 - 024 Spring Kit, Thermo-couple

© GBC Pro - Tech April 1999 Page 4 - 27PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCFASTENAL # SC06C0016AY00001324AREQ'D DESCRIPTIONPART NO. ITEM1 SHAFT, REWIND DRIVE 710-092 12 ASSY, CORE CHUCK 001-457 21 SUPPORT, CORE 530-022 31 SET SCREW, 3/8-16 X 1/2 BRASS TIP - 42 ROLL PIN, 1/8 X 7/8 095-102 5REVISIONNOTES:1. ASSEMBLE PARTS AS SHOWN.2. PACK -5- ROLL PINS TOGETHER ANDLABEL CONTAINER WITH:- PART NUMBER.- THE STATEMENT; "PRESS PINSINTO HOLES IN MACHINE DRIVE SIDEREWIND FLANGE (DRIVEN ONE)".3. CONSOLIDATE AND PACK EACH KITSEPERATELY.4. LABEL EACH KIT WITH THE KIT ITEMNUMBER.SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 10/28/98 DRAWN BY: SCALE:RELEASENO.2243AJH 1/1RPRO-TECHKIT, DS60 REWIND DRIVE-SIZE:ADwg:005-041GBC Pro - Tech Parts ManualDS 60 : 005 - 041 Positive Rewind

© GBC Pro - Tech April 1999 Page 4 - 28NOTES:PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC1. ENERGIZE HEATER AND COMPARE THE LOCATION OF HEATZONES TO 189-033 SPECIFICATIONS BEFORE SHIPPING.COOL HEATER BEFORE PACKING.2. BAG ALL PARTS; PARTNUMBER IDENTIFICATIONIS NOT NECESSARY.33735REQ'D2 SPACER, HEATER SPRING 755-061 12 SPRING 089-022 2- SLEEVE, INSULATING 180-006 34 - - 41 INSTRUCTIONS, HEATER TENSION 820-080 5REVISIONSHEET 2307 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONHEATER CHECK PROCEDURE:1. SET HEATER INTO THE TEST RIG IN THE "BURN-IN" ROOM.2. CONNECT THE BLUE AND RED WIRE (TEST RIG) TO THE HEATER.3. CONNECT THE OTHER END OF THE BLUE AND RED WIRES TO THE POWERBLOCK OF A MACHINE.4. TURN MACHINE ELECTRICAL POWER ON (PLUG MACHINE IN).5. HEATER WILL GLOW RED WHEN HOT. COMPARE HEATED LENGTH AND SIZE OFZONES TO HEATER SPECIFICATION DRAWING. ACCEPT/REJECT.6. DISCONNECT ELECTRICITY.7. COOL HEATER FOR ABOUT AN HOUR.8. REMOVE BLUE AND RED WIRES FROM MACHINE AND HEATER.9. REMOVE HEATER FROM RACK AND RETURN COILED WIRES TO RACK.FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.1/20/99DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645KIT, TENSIONED HEATERDS602307SCALE:PART NO.2 #10 EXTERNAL LOCK WASHERS - 61 HEATER, ROUND 7/16 189-033 6SIZE:AJH 1:1 ADwg:ITEM005-043GBC Pro - Tech Parts ManualDS 60 : 005 - 043 Heater Tensioning Kit W/ Heater

SHEET 1834 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005AJH2/5/99FINISHTO BE125ANGLESP 1D501-039 replaces 501-029 Block, Gearbox (with associated parts).TITLE:DATE:RELEASENO.12-19-9718344151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RSCALE:SIZE:Dwg:© GBC Pro - Tech April 1999 Page 4 - 29DCBA8PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH690 - 056Main roll, upper690 - 056Main roll, upperC76BEARING BLOCK ASSEMBLY(TOP VIEW)020 - 007Bearing, roll, upper040 - 035Bushing710 - 084Shaft, lift torque755 - 070Spacer501 - 025Bearing, block020 - 007Bearing8 7 6 5 4 35629 - 009Link, roll, bearing block501 - 025Block, roll bearing501 - 027Gib, block, roll bearing026 - 000Bearing, flanged710 - 087Shaft, crank510 - 232Bracket, crank lift465 - 034Crank handle501 - 039Block, crank shaft430 - 005Worm gear629 - 014Lever, clamp assembly4501 - 027Gib, block, roll bearing3629 - 010Link, roll pivot axleREQ'D095 - 103Pin, dowel2629 - 011Lever, roll liftREVISIONDESCRIPTION629 - 017Link, lift rod040 - 003Bushing290 - 280Clamp collar325 - 210Clevis, D-231-3PRO-TECHASSEMBLY, MAIN ROLL LIFTDS - 60SNF 1:3 D 052 - 0032 11PART NO.089 - 018Spring, die290 - 260Lock collar001 - 437Magnet, force guageH 3257REV ECN BY DESCRIPTIONITEM501 - 027Gib, block, roll bearingDCBAGBC Pro - Tech Parts ManualDS 60 : 052 - 03 Assembly, Main Roll Lift ( CNO )

GBC Pro - Tech Parts ManualOrca I SAEIllustrated Parts Diagrams( 000 - 036 )Available Options ;001 - 299 ( Infeed sliters )001 - 345 ( Outfeed table )© GBC Pro - Tech April 1999 Page 5 - 1

© GBC Pro - Tech April 1999 Page 5 - 2450 - 180Hazard voltage decal001 - 202Rear control panel001 - 271Assembly, Accessory pack450 - 032Red stripeDrive SideORCA IBy Pro-Tech545 - 003Cabinet cover, drive214 - 313E-Stop, push buttons450 - 136Read safety decal520 - 028Cabinet, drive545 - 004Cabinet cover, control450 - 110E-Stop decals001 - 201Front control panel450 - 131Danger voltage decal214 - 263Foot switchControl SideORCA I186 - 007Circuit breaker186 - 002Fuse carriers175 - 180Strain relief, 1/2"By Pro-Tech465 - 015Guard handles450 - 032Red stripe450 - 180Hazard voltage decal520 - 029Cabinet, control186 - 000Fuse holders186 - 2003 amp fuses175 - 190Strain relief, 3/4"GBC Pro - Tech Parts ManualO I : Side Cabinets & Covers

GBC Pro - Tech Parts ManualO I : Front / Rear viewsFront View001 - 124Core chuck grippers530 - 012Core supports050 - 022Set screws860 - 003Rewind tube001 - 185Assembly, rewind, drive520 - 028Cabinet, drive001 - 201Front control panel098 - 002Plungers, retractable690 - 054Rolls, main700 - 015Saddle, shaft, paper520 - 029Cabinet, control700 - 002Saddle, shaft, front001 - 158Assembly, brakes425 - 003Motor, Bison770 - 374Tie bars, grey510 - 103Brackets, castor001 - 297Assembly, infeed table780 - 003Kick cables470 - 101Leveling padsRear View710 - 043Shafts, unwind770 - 373Tie bars860 - 004Tube, idler690 - 024Roll, pull, upper700 - 001Saddle, shaft, rear001 - 158Assembly, brakes001 - 202Rear control panel710 - 053Shaft, pull roll, upper520 - 027Fan bridge026 - 100Bearings, lower pull roll001 - 181Assembly, rewind, brake001 - 185Assembly, rewind, drive186 - 007Circuit breaker645 - 011Foot bolts770 - 374Tie bars, grey690 - 025Roll, pull, lower470 - 130Castors© GBC Pro - Tech April 1999 Page 5 - 3

GBC Pro - Tech Parts ManualO I : Control Side - Components214 - 313E-Stop push button214 - 000Overtemp micro switch194 - 002Indicator, red214 - 314E-Stop contactor230 - 006Infrared sensors250 - 001Photo-eye, receiver250 - 001Photo-eye, receiver180 - 150Assembly, wire duct set185 - 005Rectifier214 - 000Overtemp micro switch210 - 000Safety contactor201 - 001Vacuum table jack189 - 024Heaters001 - 208Assembly, electrical panel180 - 006Insulating sleeve, heaters182 - 001Cooling fan, 7"001 - 205Assembly, main roll solenoid001 - 329Assembly, pull roll solenoid+ -214 - 330Micro switch, kick cable214 - 330Micro switch, kick cable© GBC Pro - Tech April 1999 Page 5 - 4

GBC Pro - Tech Parts ManualO I : Control Side - Hardware001 - 206Assembly, main cylinder001 - 250Shim disk, main, control672 - 007Plate, main roll510 - 149Bracket, upper over temp001 - 252Shim disk, pull, control001 - 187Bearing block, main roll510 - 235Brackets, upper heater005 - 028Kit, heater tension510 - 125Bracket, proto-eye, front001 - 207Assembly, pull cylinder510 - 134Bracket, Infrared sensor510 - 107Brackets, rear photo-eye026 - 000Bearings, lower mian roll510 - 157Bracket, contact block501 - 010Block, stop, table510 - 150Bracket, lower over temp510 - 236Bracket, lower heater730 - 006Side frame, control+ -510 - 116Brackets, micro switch510 - 116Brackets, micro switch© GBC Pro - Tech April 1999 Page 5 - 5

GBC Pro - Tech Parts ManualO I : 001 - 208 Electrical Panel001 - 208Assembly, electrical panel220 - 130KBIC-9890 resistor186 - 135Ceramic fuses, 20 amp220 - 160Motor controller board175 - 004Cable tie bases217 - 170Rail ends207 - 007Relay bases207 - 006Type 60 relays, 24V DC610 - 100Heat sink, modified510 - 265Fan mounting bracket182 - 012Guard, Muffin fan, 3"182 - 000Muffin fan, 3", 24V DC175 - 008Stand off, Pan pole001 - 233Din rail setfinder4 OIUN TP PU U3 T T43P2 P1 F+ P3 A+ I1 F- L1 L2 A-O 1INUTP PU UT T 21201222233333456789101112314115167181290221223422526728293033031233335363738220 - 110Barrier board217 - 250Cover, jumper bars217 - 2404mm jumper bars207 - 003Relay covers217 - 2704mm terminals, blue207 - 005Solid state relay217 - 1404mm terminals, ground001 - 338T.V.S. assemblies217 - 1204mm terminals, gray217 - 21510mm terminal, end covers245 - 200Power supply, 24V DC100 - 015Capacitor bracket670 - 004Panel, electrical120 - 002Threaded spacers, HexA1A2A3A4A5A6185 - 001Capacitor217 - 22010mm terminals, gray217 - 24010mm terminals, ground© GBC Pro - Tech April 1999 Page 5 - 6

GBC Pro - Tech Parts ManualO I : Front & Rear Panels001 - 201 Front Control Panel465 - 300Knob, speed controlPRO-TECH Engineering Madison,WI 608-246-8844FWDAUTO9612450 - 022Overlay, front panel220 - 161Potentiometer, rotary301815SPEEDREVSTOPMOTOR CONTROLS214 - 370Switch, auto/stop214 - 350Switch, fwd/rev214 - 360Switch, on/offIOHEATTOP72230 - 007Temperature controls214 - 360Switch, on/offIOBOTTOM72230 - 008AdaptersPRESSUREADJ340 - 113Guage, 0-100340 - 005Regulator, NorgrenROLL214 - 320Switch, 2P-3TLAMINATOR ROLL CONTROLS194 - 000Indicator, greenPOWERFAN214 - 360Switch, on/off001 - 202 Rear Control PanelPRESSUREADJ340 - 113Guage, 0-100340 - 005Regulator, NorgrenPULL ROLL CLUTCH340 - 113Guage, 0-100PRESSURE450 - 023Overlay, rear panelROLLADJ214 - 360Switch, on/off340 - 005Regulator, NorgrenPULL ROLL CONTROLSAUTO214 - 370Switch, auto/stopSTOP© GBC Pro - Tech April 1999 Page 5 - 7

GBC Pro - Tech Parts ManualO I : Drive Side - Components214 - 314E-Stop contactor214 - 313E-Stop push button510 - 235Bracket, upper heater510 - 107Brackets, photo-eye, rear510 - 108Bracket, Photo-eye, front250 - 002Photo-eye, Emitter250 - 002Photo-eye, Emitter540 - 003Conduit tube, metallic510 - 236Bracket, lower heater182 - 001Cooling fan, 7"214 - 1323 pos terminal block425 - 003Motor, Bison175 - 180Strain relief, 1/2"© GBC Pro - Tech April 1999 Page 5 - 8

GBC Pro - Tech Parts ManualO I : Drive Side - Hardware730 - 005Side frame, drive672 - 007Plate, Main roll001 - 249Shim disk, main, drive001 - 195Assembly, main cylinder001 - 251Shim disk, pull, drive435 - 175Sprocket, rewind001 - 197Assembly, pull cylinder001 - 187Bearing block, main roll435 - 002Sprocket, main roll375 - 170Clutch040 - 022Tapered bushing400 - 152Chain, primary400 - 151Chain, secondary001 - 184Assembly, self tensioner001 - 290Assembly, tensioner001 - 289Sprocket, drive435 - 175Sprocket, rewind440 - 130Sprocket, idlers425 - 255Sprocket, motor© GBC Pro - Tech April 1999 Page 5 - 9

© GBC Pro - Tech April 1999 Page 5 - 10690 - 024Rolls, pull, upper690 - 025Rolls, pull, lower026 - 100Bearings, lower pull roll425 - 003Motor, Bison770 - 374Tie bars, grayDrive Side700 - 001Saddle, shaft, rear001 - 185Assembly, rewinds, drive690 - 054Rolls, main672 - 016Pressure plateControl Side001 - 158Assembly, brakes001 - 191Assembly, chill idlers501 - 010Block, stop, table098 - 002Plungers, retractable 710 - 053Shaft, pull, upper001 - 296Assembly, slitter idler 520 - 027001 - 297BridgeAssembly, infeed table700 - 015Saddle, shaft, paper086 - 100Pins, pull700 - 002Saddle, shaft, front510 - 103Brackets, castor001 - 295Assembly, table, frame510 - 121Brackets, clevis, unwind470 - 130Castors001 - 181Assembly, rewind, brake770 - 373Tie bars860 - 004Tube, idler001 - 210Assembly, filter, airGBC Pro - Tech Parts ManualO I : Bridge And Inside Parts

© GBC Pro - Tech April 1999 Page 5 - 11AREQ'D DESCRIPTIONPART NO. ITEM1 CHUCK,CORE,QUICK DISCONNECT 530-004 13 GRIPPER,CORE 100-032 26 SCREW,SELF-TAPPING,#6-32 X .375 - 31 SCREW,SET,BRASS TIP,1/2-13 X .5 050-007 4REVISION4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY,CHUCK,CORE,1.625-DATE: DRAWN BY: DWG SCALE:5-23-94 RAS A11Dwg:32001-124GBC Pro - Tech Parts ManualO I : 001 - 124 Core Grippers

N© GBC Pro - Tech April 1999 Page 5 - 12UDETAILA DISC SPRINGORIENTATION3X SCALEREQ'DDESCRIPTIONPART NO. ITEM1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 41 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 KNOB, ADJUSTMENT, BRAKE 465-020 92154GTS4-8-2536962507961166951161950937RLM1-25-P.RED11-01- .P.R10-26- .RAS3-03-95REVISIOCBA89SHEET 11OFUNLESS OTHERWISESPECIFIEDTOLERANCEDIM.FINISSHOWNAS TOL.HX/ P 1/TO BEX 64X P 125. .050X. PX .020X.X PANGLESX .010X.XX PP 1DX .005TITLE:367SEE DETAIL A24151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532 Fax (608) 246-864511-15-DATE:DRAWN BY:94 RARELEASENOS.PRO-TECHRASSEMBLY, BRAKE-SCALE:1/1SIZE:CDwg:001-158GBC Pro - Tech Parts ManualO I : 001 - 158 Unwind Brakes

NR© GBC Pro - Tech April 1999 Page 5 - 13119 108 71 2 3SECTIONSCALE: 1/1A-A456REQ'DDESCRIPTIONAREVISIOSHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.SHOWTOLASFINIS.NTO HX/ P 1/BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005TITLE:PART NO.1 PLUG, CLUTCH, ORCA I X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SPRING CLIP, 5100-100 090-140 71 COMPRESSION SPRING, C1225-105-1500M 089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 11ASSY, REWIND,ORCA BRAKE1DRAWN SCALEBY::RAS 1:2SIZE:CDwg:ITEM4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-8645PRO-TECHDATE 11-15-: 94RELEASENO.001-181GBC Pro - Tech Parts ManualO I : 001 - 181 Rewind Brakes

N© GBC Pro - Tech April 1999 Page 5 - 14A 6A 43A51REQ'D DESCRIPTIONPART NO. ITEM1 TENSIONER, CHAIN 440-150 11 SPROCKET, 19T 440-130 21 ROD, THREADED, 1/2 - 13 X 3.25 645-018 31 NUT, JAM, SELF-LOCKING, 1/2-13 - 41 NUT, NYLOCK, 1/2-13 - 52 NUT, 1/2-13 - 62K.L10-30- .REVISIO951063AThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDE2117 N. Stoughton Rd. Madison, WisconsinDIM.TOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/TITLEBEP 1/64X:X125P .050ASSY,TENSIONER,CHAIN.X.P .020-XX.XANGLEDATEDRAWNDWG DwgP .010X:BY:SCALE::SP 11-16-CX.XX1DP .005K.L.X941Pro-Tech Engineering001-184GBC Pro - Tech Parts ManualO I : 001 - 184 Self Tensioning Idler

NR© GBC Pro - Tech April 1999 Page 5 - 156A8593421110SECTIONA1A-ASCALE: 2/1REQ'DDESCRIPTIONREVISIOSHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOLSHOW ASFINIS.NTO HX/ P 1/ BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005TITLE:PART NO.1 PLUG, CLUTCH DRIVE 001-261 11 WASHER, THRUST, .090 THK 032-420 21 WASHER, THRUST .030 THK 032-410 31 BEARING, THRUST 032-400 41 BUSHING, BOST-BRONZE 500-003 51 KEY, 1/4 X 1/4 X 3/8 LG - 6- - - 71 LOCK NUT, 5/8-11 - 81 SPROCKET, 35BS20x5/8 435-175 94 WASHER, THRUST, .090 THK 032-205 101 BEARING, THRUST 032-190 11ASSY, REWIND,ORCA DRIVE1DRAWN SCALEBY::RAS 1:2SIZE:CDwg:ITEM4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-8645PRO-TECHDATE 11-15-: 94RELEASENO.001-185GBC Pro - Tech Parts ManualO I : 001 - 185 Rewind Drive

© GBC Pro - Tech April 1999 Page 5 - 1612REQ'D DESCRIPTIONPART NO. ITEM1 BLOCK,BEARING,MAIN ROLL,ORCA I 501-009 11 BEARING,NEEDLE,OUTTER RACE 028-000 21 BEARING,NEEDLE,INNER RACE 028-001 31 GREASE FITTING 060-005 43RAS4-12-95 REVISION0959A4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:11-17-94 K.L. A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645BLK,BRG,LEFT,MAIN ROLLORCA IDwg:001-187GBC Pro - Tech Parts ManualO I : 001 - 187 Main Roll Bearing Block

© GBC Pro - Tech April 1999 Page 5 - 1786121 9REQ'D DESCRIPTIONPART NO. ITEM2 IDLER,OUPUT,ORCA I 620-012 11 SHAFT,IDLER,OUPUT,ORCA I 710-039 24 BEARING 020-100 32 SHCS,3/8-16 X 1 - 42 WASHER,LOCK,3/8 - 51 BRACKET,ARM,IDLER,RT,ORCA I 510-111 61 BRACKET,ARM,IDLER,LF,ORCA I 510-113 72 BUSHING,BRONZ,.62 X .5 040-021 81 SHAFT,IDLER,OUTPUT,ORCA I 710-040 94 SHCS,3/8-16 X .5 - 102 PLUNGER,RETRACTABLE,1/4 098-002 111 SHAFT,LIFTER,IDLER,ORCA I 710-038 122 NUT,HEX,JAM,1/2-13 - 1311123This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISESPECIFEDTOLERANCEDIM.ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISTO HBE12510ANGLESP1DTITLE:104 5137Pro-TechEngineeringASSEMBLY,IDLER,OUTFEED-Dwg:2117 N. Stoughton Rd. Madison, WisconsinPhone (608) 246-8844 53704 Fax (608) 246-8645DATE: DRAWN BY: DWG SCALE:11-28-RAC94S2001-191GBC Pro - Tech Parts ManualO I : 001 - 191 Output Chill Idlers

125© GBC Pro - Tech April 1999 Page 5 - 18DCBA1094PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH412C4615EACH SIDE8131433311 5 6111REQ'D222DESCRIPTION2 ROLL, MAIN, IF-60 690-054 11 ASSEMBLY,CYLINDER,MAIN ROLL,RT 001-206 21 ASSEMBLY,CYLINDER,MAIN ROLL,LF 001-195 32 PLATE,BEARING,MAIN ROLL 672-007 41 WASHER,THRUST,.03 032-230 53 COLLAR,LOCK,1.62 290-001 61 SPRING,WAVE,1.625ID 089-006 72 SPACER,BUSHING 500-004 88 SHCS,1/4-20 X .625 - 98 WASHER,LOCK,1/4 - 102 BUSHING,MODIFIED,1.625,X1.25 500-001 112 BEARING,FLANGED 026-000 124 SHCS,1/2-13 X 1.25 - 134 WASHER,LOCK,1/2 - 144 WASHER,THRUST,.03 032-009 157 6D.G.4-9-98P.R. 277 36-11-97MS 210-16-96 2589REVISION30915 EACH SIDENOTE: REMOVE SET SCREWSFROM THIS BEARINGGFESHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNTOL. FINISHTO BEX/X P 1/64X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .005TITLE:1PART NO.PRO-TECHR4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,ROLL,MAIN-11-29-94 DRAWN BY:RADATE: SCALE:RELEASNO. ES1/1SIZE:CDwg:ITEM001-194DCBAGBC Pro - Tech Parts ManualO I : 001 - 194 Assembly, Main Roll ( CNO )

N© GBC Pro - Tech April 1999 Page 5 - 19137512 161011PLACE WASHER UNDER SHIM DISK61514REQ'D DESCRIPTIONPART NO. ITEM1 CYLINDER,2.5 X 1.7514 SHCS,5/16-18 X .75 - 24 WASHER,LOCK,5/16 - 31 COUPLING,ROD END,1/2-20 325-000 42 CONTROL,FLOW 330-130 52 FITTING,STRAIGHT,1/4NPT X 1/4 330-600 61 LOCK COLLAR,1/2-20 290-260 71 SHCS,1/2-20 X .5 -81 STUD, THREADED, 1/2 - 20 x 1" 645-007 91 ASSEMBLY,SHIM DISK,LEFT 001-249 101 PLUNGER,SPRING,1/4-20 098-120 111 BOLT,SHOULDER,3/8,1.0,5/16-18 - 121 STUD, THREADED, 1/2 - 20 x 1-3/4" 645-006 131 ASSEMBLY,BLOCK,BEARING,LEFT,MAIN ROLL 001-187 1417412 392745253909849509689509130892RL5/2/ MRL 974-12- MRA 965-18- SRA4-13- SRA3-01- SRA 952-21- SREVISIO95FEDCBA320-3201 WASHER,THRUST,.060 068-100 151 WASHER,THRUST,.312 X .06 032-360 161 1\2-20 HEX JAM NUT - 17This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDEDIM. AS2117 N. Stoughton Rd. Madison, Wisconsin 53704SHOW TOL.FINISHPhone (608) 246-8844 Fax (608) 246-4685NX/ P 1/ TO BETITLE:X 64 12X5P .050.X.X P .020X.XDwgP .010 ANGLESDATE: DRAWN BY: DWG SCALE::XPX.XX P 1D 11-29-94 RAS C2X .005Pro-Tech EngineeringASSEMBLY,CYLINDER,MAIN,LEFT-001-195GBC Pro - Tech Parts ManualO I : 001 - 195 Cylinder, Main Roll, Drive Side

© GBC Pro - Tech April 1999 Page 5 - 2020 211115171 2 4 36 7 16859 10131819125DESCRIPTIONREQ'D PART NO. ITEM11 ASSEMBLY,CYLINDER,PULL ROLL,LF1 SHAFT,PULL ROLL,UPPER 710-041 22 BUSHING,BRONZE,1,1.38,1 040-015 31 ROLL,PULL,UPPER,ORCA I 690-027 44 RING,SNAP,1.0 090-140 51 CLUTCH 375-170 61 FITTING,STRAIGHT,1/8 X 1/4 330-590 71 SHAFT,ROLL,PULL,LOWER 710-042 81 ROLL,PULL,LOWER 690-028 92 BUSHING,KEYLESS,1,1.75 040-017 102 BRACKET,MOUNTING,PHOTOEYE,PULL ROLL 510-107 111 ASSEMBLY,CYLINDER,PULL ROLL,RT 001-207 122 WASHER,THRUST,1.0 X .06 032-250 131 SWITCH,PHOTOEYE,EMITTER 250-002 141 SWITCH,PHOTOEYE,RECEIVER 250-001 151 EYEBOLT,1/4-20 - 162 LOCK COLLAR, MODIFIED 640-001 172 ASSEMBLY,BEARING 001-288 184 SHCS,3/8-16 X .75 - 192 SHCS,1/4-20 X 3/8 - 202 WASHER,LOCK,1/4 - 21REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX17TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY,ROLL,PULL-DATE: DRAWN BY: DWG SCALE:11-30-94 RAS C4001-19720Dwg:142111001-196GBC Pro - Tech Parts ManualO I : 001 - 196 Assembly, Pull Roll ( CNO )

© GBC Pro - Tech April 1999 Page 5 - 21DCBA44131011 1216723331814151916 178 94 5DE2REQ'DRLM5/2/97 2745GTS2-18-97 2665RAS8-25-95 1089RAS7-18-95 1044EDCB21 CYLINDER,1.5 X 2 320-190 11 CLEVIS,CYLINDER,7/16-20 325-001 21 SCREW,SHOULDER,3/8 X 1,5/16-18 - 32 CONTROL,FLOW,1/8NPT 330-120 42 FITTING,STRAIGHT,1/8 X 1/4 330-590 51 BRACKET,MOUNTING,CYLINDER 325-110 61 NUT,HEX,3/4-16 - 72 SHCS,1/4-20 X .5 - 82 WASHER,LOCK,1/4 - 91 BRACKET, SHIM DISK, LEFT 510-220 102 SHCS,5/16-18 X .62 - 112 WASHER,LOCK,5/16 - 121 COLLAR,LOCK,7/16 290-220 131 ASSEMBLY,SHIM DISK,PULL,LEFT 001-251 141 WASHER,THRUST,.312 X .06 032-360 151 PLUNGER,SPRING,1/4-20 098-120 161 NUT,HEX,JAM - 171 BOLT,SHOULDER,3/8,1.0,5/16-18 - 181 NUT,HEX,5/16-18 - 19RAS3-01-95 0915REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:DATE: 11-29-94RELEASENO.DRAWN BY:RSCALE:1PART NO.PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,CYLINDER,PULL ROLL,LEFT-RAS 1:21SIZE:BDwg:ITEM001-197DCBAGBC Pro - Tech Parts ManualO I : 001 - 197 Cylinder, Pull Roll, Drive Side

N© GBC Pro - Tech April 1999 Page 5 - 2265BAEB P EAROTATE FITTINGS AS REQUIRED FOR BESTASSEMBLY41REQ'D DESCRIPTIONPART NO. ITEM1 VALVE, AIR, SOLENOID 350-115 13 FITTING,AIR,ELBOW,1/4NPT 330-760 23 Y-FITTING,1/4NPT 330-310 31 MUFFLER, AIR 330-280 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330-730 52 CAP SCREWS, SOCKET, #10-32 X 1-1/4 LG - 62 3REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISEPro-TechTOLERANCSPECIFEDEDIM.2117 N. EngineeringStoughton Rd. Madison, WisconsinTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTOH4685X/TITLEBEP 1/64X:X125P .050.X.P .020XX.XANGLEDATEDRAWNDWG DwgP .010X:BY:SCALE::SP 12-9-CX.XX1DP .005K.L.X941ASSEMBLY,VALVE,CONTROL001-205GBC Pro - Tech Parts ManualO I : 001 - 205 Air Solenoid Valve, Main Roll

© GBC Pro - Tech April 1999 Page 5 - 2313 29 41011PLACE WASHER UNDER SHIM DISK 1661514125713REQ'D DESCRIPTIONPART NO. ITEM171 CYLINDER,2.5 X 1.75 320-320 14 SHCS,5/16-18 X .75 - 24 WASHER,LOCK,5/16 - 31 COUPLING,ROD END,1/2-20 325-000 42 CONTROL,FLOW 330-130 52 FITTING,STRAIGHT,1/4NPT X 1/4 330-600 61 LOCK COLLAR,1/2-20 290-260 71 SHCS,1/2-20 X .5 81 STUD, THREADED, 1/2 - 20 x 1" 645-007 91 ASSEMBLY,SHIM DISK,MAIN,RIGHT 001-250 101 PLUNGER,SPRING,1/4-20 098-120 111 BOLT,SHOULDER,3/8,1.0,5/16-18 - 121 STUD, THREADED, 1/2 - 20 x 1-3/4" 645-006 131 ASSEMBLY,BLOCK,BEARING 001-187 142 WASHER,THRUST,.06 032-140 151 WASHER,THRUST,.312 X .06 032-360 161 1\2-20 HEX JAM NUT - 172745E0985D0960C3-01-95S 0914B0891RLM5/2/97RAS5-18-95RAS4-12-95RARA2-21-95SREVISIONAThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDPro-Tech EngineeringEDIM.2117 N. Stoughton Rd. Madison, WisconsinSHOWN AS TOL. FINISH Phone (608) 246-8844 53704 Fax (608) 246-4685X/TO BEP 1/64TITLE:X125ASSEMBLY,CYLINDER,MAIN,RX. P .050TX.P .020-XX.XANGLE DATEDRAWNDwgP .010DWG SCALE:XSP :BY::X.XXRAP .005 1D 11-29-94C2S001-206XGBC Pro - Tech Parts ManualO I : 001 - 206 Cylinder, Main Roll, Control Side

© GBC Pro - Tech April 1999 Page 5 - 24PLACE WASHER UNDER SHIM DISK1519 181417 1612 115 49 8131016723REQ'D DESCRIPTIONPART NO. ITEM1 CYLINDER,1.5 X 2 320-190 11 CLEVIS,CYLINDER,7/16-20 325-001 21 SCREW,SHOULDER,3/8 X 1,5/16-18 - 32 CONTROL,FLOW,1/8NPT 330-120 42 FITTING,STRAIGHT,1/8 X 1/4 330-590 51 BRACKET,MOUNTING,CYLINDER 325-110 61 NUT,HEX,3/4-16 - 72 SHCS,1/4-20 X .5 - 82 WASHER,LOCK,1/4 - 91 BRACKET,MOUNTING,SHIM,CYLINDER 510-132 102 SHCS,5/16-18 X .62 - 112 WASHER,LOCK,5/16 - 121 COLLAR,LOCK,7/16 290-220 131 ASSEMBLY,SHIM DISK,PULL,RIGHT 001-252 141 WASHER,THRUST,.312 X .06 032-360 151 PLUNGER,SPRING,1/4-20 098-120 161 NUT,HEX,JAM - 171 BOLT,SHOULDER,3/8,1.0,5/16-18 - 181 NUT,HEX,5/16-18 - 19274597109095104595091695RL5/2/ MRA8-25- SRA7-18- SRA3-01- SDCBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISE SPECIFEDTOLERANCPro-Tech EngineeringEDIM.2117 N. Stoughton Rd. Madison, Wisconsin 53704SHOW AS TOL. FINISPhone (608) 246-8844 Fax (608) 246-8645NHTOX/BEP 1/64TITLE:X125X. P .050X.P .020XX.XP .010 ANGLESDATE: DRAWN BY: DWG SCALE: Dwg:XX.XXP 1DRA11-29-94C2P .005XSASSY,CYLINDER,PULL ROLL,RIGHT-001-207GBC Pro - Tech Parts ManualO I : 001 - 207 Cylinder, Pull Roll, Control Side

N© GBC Pro - Tech April 1999 Page 5 - 2532785REQ'D DESCRIPTIONPART NO. ITEM1 FILTER,NAF-2000-N02-C 340-250 11 FITTING,AIR,ELBOW,1/4NPT 330-760 21 COUPLE,KWIK 711 330-260 31 BRKT.,FILTER,B-240 100-220 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330-730 52 SHCS,10-32 x .5 - 61 AIR,FITTING,UNION-Y 330-305 713' TUBE , PNEUMATIC, 1/4" FLAME RETARDENT 360-001 862520RLM2-21-96 REVISIOA14This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISESPECIFEDPro-TechTOLERANCEEngineeringDIM.2117 N. Stoughton Rd. Madison, WisconsinAS TOL. FINISPhone (608) 246-8844 53704 Fax (608) 246-SHOWNH8645X/ P 1/TO BETITLE:X 64X P 125ASSEMBLY,FILTER,AIR. .050X. PX .020X.X PDwgANGLES DATE: DRAWN BY: DWG SCALE:X .010:X.XX P P 1D 12-9-K.LC1X .00594.001-210GBC Pro - Tech Parts ManualO I : 001 - 210 Air Filter

© GBC Pro - Tech April 1999 Page 5 - 26REQ'D DESCRIPTIONPART NO. ITEM1 HEXHEAD BOLT, MOD, 1/4-20 X 2.5 505-001 11 CAP,VINYL 465-014 21 2REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:12-19-94 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,HANDLE,CAMORCA IDwg:001-217GBC Pro - Tech Parts ManualO I : 001 - 217 Handle, Cam, Table Idler

© GBC Pro - Tech April 1999 Page 5 - 27REQ'D DESCRIPTIONPART NO. ITEM1 IDLER,INFEED,PAPER 620-013 12 BUSHING,BRONZ,.5 X .75 X .625 040-026 21PRESS IN BUSHING.505 DIA REAM BUSHINGEACH ENDREVISION2This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:12-15-94 RAS C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,IDLER,INFEED,PAPERORCA 1Dwg:001-218GBC Pro - Tech Parts ManualO I : 001 - 218 Idler, Infeed Paper

© GBC Pro - Tech April 1999 Page 5 - 28PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC3.25REQ'D- DIN RAIL 217-200 -4.2510.50 13.25REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:DATE: 7-19-96RELEASENO.4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645SET, DIN RAILORCA IDRAWN BY:RPRO-TECHSCALE:RLM 1/1PART NO.SIZE:ADwg:ITEM001-233GBC Pro - Tech Parts ManualO I : 001 - 233 Din Rail Set

© GBC Pro - Tech April 1999 Page 5 - 291/163/3201/83/163/81/423/16 1/4 3/81/2REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,MAIN LEFTORCA I3-01-95 RAS A1Dwg:001-249GBC Pro - Tech Parts ManualO I : 001 - 249 Main Roll Shim Disk, Drive

© GBC Pro - Tech April 1999 Page 5 - 301/41/83/163/323/801/223/8 1/2 01/16REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,MAIN RIGHTORCA I3-01-95 RAS A1Dwg:001-250GBC Pro - Tech Parts ManualO I : 001 - 250 Main Roll Shim Disk, Control

© GBC Pro - Tech April 1999 Page 5 - 313/321/81/1603/16 1/415.0°3/16 1/421/23/8REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:3-01-95 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,PULL,LEFTORCA IDwg:001-251GBC Pro - Tech Parts ManualO I : 001 - 251 Pull Roll Shim Disk, Drive

© GBC Pro - Tech April 1999 Page 5 - 323/81/43/161/2015.0°1/2 01/821/163/32REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:3-01-95 RAS A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,PULL,RIGHTORCA IDwg:001-252GBC Pro - Tech Parts ManualO I : 001 - 252 Pull Roll Shim Disk, Control

© GBC Pro - Tech April 1999 Page 5 - 33PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCBBREQ'DDESCRIPTIONPART NO.ITEM1 TOWEL,WHITE 475-950 11 ZIPPY KNIFE 475-620 31 ALLEN WRENCH SET 475-230 44 LEVELING PAD 470-101 53 FUSE 3A,250 186-200 61 TAPE MEASURE 475-100 71 RUBBER CEMENT 930320 91 MASKING TAPE 475-000 101 BOX ACCESSORY 475-010 111 MANUAL 930404 122 'O'-RING 480-005 131 PAD,FELT 375-000 141 UW/RW MOUNTED BRAKE 625-006 15MS2-18-97 2664RLM4-02-96 2536REVISIONBASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ACCESSORY KITORCA 1DATE: 3-06-95 DRAWN BY: SCALE:RELEASENO.RAS 1/1RPRO-TECHSIZE:A1Dwg:28001-271GBC Pro - Tech Parts ManualO I : 001 - 271 Accessory Pack

© GBC Pro - Tech April 1999 Page 5 - 34REQ'D DESCRIPTIONPART NO. ITEM11 SPROCKET,DRIVE,MODIFIED 750-000 12 BEARING,NEEDLE 028-002 22REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SPROCKET,DRIVE-DATE: DRAWN BY: DWG SCALE:4-13-95 RAS A1Dwg:001-289GBC Pro - Tech Parts ManualO I : 001 - 289 Sprocket, Drive

© GBC Pro - Tech April 1999 Page 5 - 35DCB4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH46C33 4 5SHEET 1 OF 1UNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOL.SHOWN ASFINISHAX/TO BEP 1/64X125X. P .050X.P .020XX.XANGLEP .010XSPX.XXP .005 1DX38 APPLY BLUE LOCTITE1729APPLY BLUE LOCTITEAPPLY BLUE LOCTITEAPPLY BLUE LOCTITE2REQ'D DESCRIPTION PART NO. ITEM1 SHFT,IDL,.5/SO1 440-110 11 SPRKT,35,13T,.5/35BS13F 440-125 21 IDLER BASE 440-002 32 HEX HEAD BOLT,1/4-20 X .875 - 41 WASHER,FLAT,1/4 - 51 HEX HEAD BOLT,5/16-18 X .875 - 61 SAE WASHER,FLAT,1/2 OD X 1/4 ID - 71 SET SCREW 10-32 X .25 - 81 SET SCREW 1/4-20 X .25 - 92S2543M8-8-96REVISIONATITLE:DATE:RELEASENO.RSCALE:1/11PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,TENSIONER,CHAINORCA11SIZE:BDwg:4-17-DRAWN95BY:RAS001-290DCBAGBC Pro - Tech Parts ManualO I : 001 - 290 Adjustable Chain Tensioner

© GBC Pro - Tech April 1999 Page 5 - 365REQ'D DESCRIPTIONPART NO. ITEM1 ASSEMBLY,IDLER,INFEED,PAPER 001-218 11 SHAFT,IDLER,INFEED,PAPER 710-054 22 CAM,LIFTING,IDLER 525-005 32 SET SCREW,1/4-20 X .375 - 42 ASSEMBLY,HANDLE,CAM 001-217 51 IDLER, INFEED, PAPER 620 - 013 62 BUSHING, BRONZE, .5 X .75 X .625 040 - 026 71624GT3S26514151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532 Fax (608) 246-86451-30-97REVISIONASHEET 1 1OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/X.X.XX.XXX.XXX7TOL.P 1/64 P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:DATE: 5-8-95 DRAWN BY:RASSCALE:1:4RELEASE NỌRPRO-TECHASSEMBLY,IDLER,INFEED,PAPERORCA 1SIZE: Dwg:C001-294GBC Pro - Tech Parts ManualO I : 001 - 294 Idler, Infeed, Paper

© GBC Pro - Tech April 1999 Page 5 - 3715191131 26 58 714BAA10REQ'D DESCRIPTIONPART NO. ITEM1 EXTRUSION,MOD 110-017 11 EXTRUSION,MOD 110-019 21 EXTRUSION,MOD 110-018 32 EXTRUSION,MOD 110-024 42 SHCS,5/16-18 X 5/8 - 52 5/16-18 ECONOMY T-NUT 050-003 64 SHCS,1/4-20 X 1/2 - 74 1/4-20 ECONOMY T-NUT 050-001 82 BRACKET,MOUNTING,EXTRUSION 510-128 96 END FASTENER,1/4-20 100-018 102 COVER,T-SLOT 465-013 112 END CAP 465-012 124 FASTENER,PUSH-IN 100-020 131 BRACKET,PIVOT,TABLE,RIGHT 510-140 141 BRACKET,PIVOT,TABLE,LEFT 510-145 158 SHCS,1/4-20 X .5 - 168 T-NUT,1/4-20 050-001 172 1/4 DIA X 5/8 DOWEL PIN 095-191 181 SLITTER IDLER 001-298 19RAS11-02-95 2596K.L.9-11-95 1102REVISIONBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1D916 17 18TITLE:41012 13DATE: DRAWN BY: DWG SCALE:5-8-95 RAS C4Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,FRAME,TABLE,ORCA IORCA IDwg:001-295GBC Pro - Tech Parts ManualO I : 001 - 295 Frame, Infeed Table

© GBC Pro - Tech April 1999 Page 5 - 38REQ'D DESCRIPTIONPART NO. ITEM2 BEARING, IDLER 020-100 11 TUBE, SLITTER, PVC 490-001 21 ROLL, IDLER 620-016 31132REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,IDLER,SLITTER,PAPERORCA IDATE: DRAWN BY: DWG SCALE:5-08-95 RAS C1Dwg:001-296GBC Pro - Tech Parts ManualO I : 001 - 296 Idler, Slitter

© GBC Pro - Tech April 1999 Page 5 - 39122 3 4 5 61SECTION "A-A"18(SLITTEROPTION)12REQ'D DESCRIPTIONPART NO. ITEMA1 ASSEMBLY,FRAME,TABLE 001-295 11 TABLE COMPONENT,TOP,FRONT 760-030 22 BRACKET,ANGLE 100-023 32 SCREW,WOOD,PAN HEAD, #12 X .75 - 46 T-NUT,1/4-20 050-001 54 BHCS,1/4-20 X 1/4 - 61 TABLE COMPONENT,PRESSURE PLATE 672-016 72 SHOULDER BOLT,5/16 X .38,1/4-20 - 81 TABLE COMPONENT,TOP,BACK 760-029 93 BHCS,5/16-18 X 3/8 - 103 T-NUT,5/16-18 050-003 112 COMPRESSION SPRING, LC - 032 - F3 098-002 122 SHOULDER BOLT,1/2 DIA,3/8-16 X .5 LG - 134 BLOCK,STOP,PIVOT,TABLE 501-010 148 SHCS,5/16-18 X .625 - 154 SHCS,1/4-20 X 1.25 - 164 NUT,JAM,HEX,1/4-20 - 171 FELT STRIP,BLACK,2-1/4 WIDE 499-002 181 ASSEMBLY,IDLER,INFEED 001-294 19148 51313 15AAAK.L.9-5-95 1099REVISIONAASHEET1911 101 OF 19UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .0055 67TITLE:DATE:RELEASENO.R PRO-TECH14DRAWN BY: SCALE: SIZE:RAS 1:4 C45 6316 17154151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, TABLE, ORCA 1-5-9-95Dwg:001-297GBC Pro - Tech Parts ManualO I : 001 - 297 Infeed Table

© GBC Pro - Tech April 1999 Page 5 - 40REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT,IDLER,SLITTER,PAPER 710-055 11 ASSEMBLY,IDLER,SLITTER,PAPER 001-296 22 BHCS,3/8-16 X .5 - 31 SLITTER TUBE 490 - 001 42 BEARINGS IDLER 020 - 100 51 24REVISION53This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDPro-TechEDIM.2117 N. Stoughton Rd. Madison, WisconsinEngineeringTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/ P 1/TITLBEX 64E:12X P 5 ASSEMBLY,SLITTER,IDLER. .050X. PORCA IX .020X.X P ANGLEDATDRAWNDWG DwgX .010E:BY:SCALE: :SPX.XX P1D 5-9-95 RAS C4X .005001-298GBC Pro - Tech Parts ManualO I : 001 - 298 Slitter Idler

© GBC Pro - Tech April 1999 Page 5 - 41201BC637 8 94 5TIGHTEN -13- ONTO -17- UNTIL ALL OF -11- IS PILOTED ON -17-.THE -15- AND -16- MUST ROTATE FREELY TOGETHER ON -17-.BLUE LOCTITE -13- TO -17-.2191311141021CCBCREQ'D DESCRIPTIONPART NO. ITEM1 ARM,SLITTER 740-008 11 BLOCK,PIVOT,SLITTER,INFEED 740-009 21 BOLT,SHOULDER,1/4,.75,10-24 - 31 SET SCREW,FLAT POINT,1/4-20 X .5 - 41 SPRING,TENSION 089-150 51 SCREW,THUMB,1/4-20 X 2.0 092-130 61 ASSEMBLY,KNOB 001-314 71 WASHER,FLAT,1/4 - 81 T-NUT,1/4-20 050-001 92 WASHER, CONCAVE 740-007 101 BEARING, THRUST, 5/16 X 5/8 032-003 11- - - 121 NUT, NYLOCK, 8-32 - 132 WASHER, THRUST, 5/16 X 5/8 032-004 141 BLADE, SLITTER, CIRCULAR 475-001 151 FLANGED BUSHING, STEEL 040-037 161 STRIP, 3/16 X 3/4 050-032 171 WASHER, THRUST, 3/16 X 1/2 032-005 181 RIVET,FLATHEAD,1/8 X 1/4 X 1/4 Lg - 191 WARNING LABEL 450-012 202 O-RING 480-030 2115AJH2/15/99 3269AJH12/16/97 3006RAS9-20-95 1123CBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .00516FINISHTO BE125ANGLESP 1DGREASE I.D. WITHBEARING GREASELIKE DOW 44.TITLE:1817Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SLITTER,INFEEDORCA IDATE: DRAWN BY: DWG SCALE:6-12-95 RAS A1Dwg:B001-299GBC Pro - Tech Parts ManualO I : 001 - 299 Infeed Slitters

© GBC Pro - Tech April 1999 Page 5 - 42AREQ'D DESCRIPTIONPART NO. ITEM1 KNOB,KNURLED 465-007 11 SET SCREW,FLATPOINT,1/4-20 X 2.0 050-012 22K.L.8-7-95 1065AREVISION1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:7-21-95 RAS A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,KNOB,1/4-20ORCA IDwg:001-314GBC Pro - Tech Parts ManualO I : 001 - 314 Assembly, Knob, Infeed Slitters

N© GBC Pro - Tech April 1999 Page 5 - 4365BAEB P EAROTATE FITTINGS AS REQUIRED FOR BESTASSEMBLY41REQ'D DESCRIPTIONPART NO. ITEM2 71 VALVE, AIR, SOLENOID 350-115 13 FITTING,AIR,ELBOW,1/4NPT 330-760 22 Y-FITTING,1/4NPT 330-310 31 MUFFLER, AIR 330-280 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330-730 52 CAP SCREWS, SOCKET, #10-32 X 1-1/4 LG - 61 RUN TEE T4X4 330-720 7REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISEPro-TechTOLERANCSPECIFEDE2117 EngineeringN. Stoughton Rd. Madison, WisconsinDIM.TOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H4685X/TITLEBEP 1/64X:X125P .050ASSEMBLY,VALVE,CONTROL.X.P .020XX.XANGLEDATEDRAWNDWG DwgP .010:BY:SCALE::XSP 10-20-CX.XX1DP .005RAS001-329X951GBC Pro - Tech Parts ManualO I : 001 - 329 Air Solenoid Valve, Pull Roll

© GBC Pro - Tech April 1999 Page 5 - 4411.4SolderSolder1REQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 TVS 1.5KE400CA 185-004 21.25" HEAT SHRINK TUBING, 1/4" X 250' 180-430 3REVISIONApply a heat shrink tube after soldering2 3This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:11-17-95 HZ A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY,TRANS. VOLT. SUPPRESSORORCA IDwg:001-338GBC Pro - Tech Parts ManualO I : 001 - 338 T.V.S. Assembly, SSR

SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .005TITLE:4-2-96RELEASENO.R4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645SIZE: Dwg:© GBC Pro - Tech April 1999 Page 5 - 45DCBA876543PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCNOTES:1. INTERPRET DRAWING PER ASME Y14.5M-1994.1098 41211165BBB472LOWER PULL ROLL BEARING BLOCKLOWER PULL ROLL BEARING BLOCK8 7 6 5 4 321REQ'DDESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, REAR, LFT 510-262 12 SUPPORT, BRACKET,TABLE 757-013 22 BHCS, 1/4-20 X 1 - 34 SCREW, ALLEN, FLT HD, 1/4-20 X 1 - 42 BLOCK, MOUNTING, CLAMP 501-014 51 BRACKET, TABLE, RR,RT 510-263 62 BHCS, 1/4-20 X 1 - 72 T-NUT 050-001 81 SUPPORT, TABLE 110-112 91 TABLE, OUTFEED 760-040 102 KNOB, LOCKDOWN 465-200 111 SETSCREW, 1/4-20 X 1 050-020 121 FIELD INSTALLATION INSTRUCTIONS 820-130 133REVISIONDATE: DRAWN BY: SCALE:RLM 1/1PRO-TECHTABLE, OUTFEED, ORCA IOPTION2 1D001-345DCBAGBC Pro - Tech Parts ManualO I : 001 - 345 Outfeed Table

© GBC Pro - Tech April 1999 Page 5 - 46PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDMANUFACTURE OR FOR ANY FOROTHER PURPOSE WITHOUTPERMISSION WRITTEN FROM GBC PRO-TECHNOTES:1. PARTS ARE SHIPPED LOOSE.1CA3373526AAAAAINSULATING SLEEVE(REMOVED)REQ'D4 SPACER, HEATER SPRING 755-061 14 SPRING 089-022 2- SLEEVE, INSULATING 180-006 38 CABLE TIE, 8" STOCK 41 INSTRUCTIONS, HEATER TENSION 820-063 5AJH7/20/98 3148AREVISIONSHEET 1937 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONFINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.3-21-98DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645KIT, HEATER TENSIONORCA I, ORCA I SP1937SCALE:PART NO.4 #10 EXTERNAL LOCK WASHERS - 6434SIZE:BJT 1:1 ADwg:ITEM005-028GBC Pro - Tech Parts ManualO I : 005 - 028 Spring Tension Kit, Heater

© GBC Pro - Tech April 1999 Page 5 - 471217.516.04.04.05.55.511.011.015.015.09.09.0REQ'D DESCRIPTIONPART NO. ITEM- WIRE DUCT, 1" COVER, GREY 180-130 1- WIRE DUCT, 1" X 1.5" WITH ADHESIVE 180-140 2- WIRE DUCT, 1" X 1" CHANNEL WITH ADHESIVE 180-110 3316.016.010.010.0REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:26.026.04.04.0Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:07-10-96 RLM C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645DUCT,WIRE, SET, MAIN CHASSISORCA IDwg:180-150GBC Pro - Tech Parts ManualO I : 180 - 150 Wire Duct Set

GBC Pro - Tech Parts ManualOrca I SPIllustrated Parts Diagrams( 000 - 045 )Available Options ;001 - 345 ( Outfeed table )© GBC Pro - Tech April 1999 Page 6 - 1

© GBC Pro - Tech April 1999 Page 6 - 2001 - 202Rear control panel520 - 028Cabinet, drive450 - 084Decal, SP450 - 180Hazard voltage decalDrive SideORCA ISPTMBy Pro-Tech545 - 003Cabinet cover, drive450 - 032Red stripe214 - 313E-Stop, push buttons450 - 136Read safety decal001 - 424Assembly, Accessory pack545 - 004Cabinet cover, control450 - 110E-Stop decals450 - 022Front panel overlay219 - 000Rate/totalizer450 - 131Danger voltage decal214 - 263Foot switch450 - 084Decal, SPGBC Pro - Tech Parts ManualControl SideORCA ISPTM By Pro-Tech186 - 007Circuit breaker186 - 002Fuse carriers175 - 180Strain relief, 1/2"465 - 015Guard handles450 - 032Red stripe450 - 180Hazard voltage decal520 - 029Cabinet, control186 - 000Fuse holders186 - 2003 amp fuses175 - 190Strain relief, 3/4"O I SP : Side Cabinets & Covers

GBC Pro - Tech Parts ManualO I SP : Front / Rear ViewsFront View001 - 441Core chuck grippers530 - 012Core supports050 - 022Set screws860 - 003Rewind tube001 - 185Assembly, rewind, drive See Front /Rear panelsfor partnumbers520 - 028Cabinet, drive098 - 002Plungers, retractable690 - 057Rolls, main001 - 482Assembly, unwind saddle520 - 029Cabinet, control700 - 002Saddle, shaft, front001 - 158Assembly, brakes425 - 003Motor, Bison770 - 374Tie bars, grey510 - 103Brackets, castor001 - 297Assembly, infeed table780 - 003Kick cables470 - 101Leveling padsRear View710 - 043Shafts, unwind770 - 373Tie bars860 - 004Tube, idler690 - 024Roll, pull, upper700 - 001Saddle, shaft, rear001 - 158Assembly, brakes001 - 202Rear control panel710 - 053Shaft, pull roll, upper520 - 027Fan bridge026 - 100Bearings, lower pull roll001 - 181Assembly, rewind, brake001 - 185Assembly, rewind, drive186 - 007Circuit breaker645 - 011Foot bolts770 - 374Tie bars, grey690 - 025Roll, pull, lower470 - 130Castors© GBC Pro - Tech April 1999 Page 6 - 3

SMCSMCGBC Pro - Tech Parts ManualO I SP : Control Side - Components214 - 313E-Stop push button214 - 000Overtemp micro switch214 - 314E-Stop contactor194 - 002Indicator, red230 - 006Infrared sensors250 - 001Photo-eye, receiverBIMBA24DP250 - 001Photo-eye, receiver180 - 150Assembly, wire duct set185 - 005Rectifier214 - 000Overtemp micro switch210 - 000Safety contactor201 - 001Vacuum table jack189 - 024Heaters001 - 208Assembly, electrical panel005 - 028Spring tension kit, heater182 - 001Cooling fan, 7"001 - 205Assembly, main roll solenoid001 - 329Assembly, pull roll solenoid+ -214 - 330Micro switch, kick cable214 - 330Micro switch, kick cable001 - 373Assembly, air booster© GBC Pro - Tech April 1999 Page 6 - 4

SMCSMCGBC Pro - Tech Parts ManualO I SP : Control Side - Hardware001 - 206Assembly, main cylinder001 - 250Shim disk, main, control510 - 149Bracket, upper over temp001 - 382Assembly, lever booster672 - 007Plate, main roll001 - 252Shim disk, pull, control510 - 235Brackets, upper heater001 - 207Assembly, pull cylinder005 - 028Kit, heater tension24DPBIMBA510 - 134Bracket, Infrared sensor510 - 125Bracket, proto-eye, front510 - 107Brackets, rear photo-eye026 - 000Bearings, lower mian roll510 - 157Bracket, contact block501 - 010Block, stop, table510 - 150Bracket, lower over temp510 - 236Bracket, lower heater730 - 006Side frame, control+ -510 - 116Brackets, micro switch510 - 116Brackets, micro switch© GBC Pro - Tech April 1999 Page 6 - 5

GBC Pro - Tech Parts ManualO I SP : 001 - 208 Electrical Panel001 - 208Assembly, electrical panel220 - 130KBIC-9890 resistor186 - 135Ceramic fuses, 20 amp220 - 160Motor controller board175 - 004Cable tie bases217 - 170Rail ends207 - 007Relay bases207 - 006Type 60 relays, 24V DC610 - 100Heat sink, modified510 - 265Fan mounting bracket182 - 012Guard, Muffin fan, 3"182 - 000Muffin fan, 3", 24V DC175 - 008Stand off, Pan pole001 - 233Din rail setfinder4 OIUN TP PU U3 T T43P2 P1 F+ P3 A+ I1 F- L1 L2 A-O 1INUTP PU UT T 21201222233333456789101112314115167181290221223422526728293033031233335363738220 - 110Barrier board217 - 250Cover, jumper bars217 - 2404mm jumper bars207 - 003Relay covers217 - 2704mm terminals, blue207 - 005Solid state relay217 - 1404mm terminals, ground001 - 338T.V.S. assemblies217 - 1204mm terminals, gray217 - 21510mm terminal, end covers245 - 200Power supply, 24V DC100 - 015Capacitor bracket670 - 004Panel, electrical120 - 002Threaded spacers, HexA1A2A3A4A5A6185 - 001Capacitor217 - 22010mm terminals, gray217 - 24010mm terminals, ground© GBC Pro - Tech April 1999 Page 6 - 6

GBC Pro - Tech Parts ManualO I SP : Front & Rear PanelsFront Control Panel465 - 300Knob, speed controlPRO-TECH Engineering Madison,WI 608-246-8844FWDAUTO9612450 - 022Overlay, front panel220 - 161Potentiometer, rotary301815SPEEDREVSTOPMOTOR CONTROLS214 - 370Switch, auto/stop214 - 350Switch, fwd/rev214 - 360Switch, on/offIOHEATTOP72230 - 007Temperature controls214 - 360Switch, on/offIOBOTTOM72230 - 008AdaptersPRESSUREADJ340 - 001Guage, 0-160340 - 005Regulator, NorgrenROLL214 - 320Switch, 2P-3TLAMINATOR ROLL CONTROLS194 - 000Indicator, greenPOWERFAN214 - 360Switch, on/off001 - 202 Rear Control PanelPRESSUREADJ340 - 113Guage, 0-100340 - 005Regulator, NorgrenPULL ROLL CLUTCH340 - 113Guage, 0-100PRESSURE450 - 023Overlay, rear panelROLLADJ214 - 360Switch, on/off340 - 005Regulator, NorgrenPULL ROLL CONTROLSAUTO214 - 370Switch, auto/stopSTOP© GBC Pro - Tech April 1999 Page 6 - 7

GBC Pro - Tech Parts ManualO I SP : Drive Side - Components214 - 314E-Stop contactor214 - 313E-Stop push button510 - 235Bracket, upper heater510 - 107Brackets, photo-eye, rear24DPBIMBA510 - 108Bracket, Photo-eye, front250 - 002Photo-eye, Emitter250 - 002Photo-eye, Emitter540 - 003Conduit tube, metallic510 - 236Bracket, lower heater182 - 001Cooling fan, 7"214 - 1323 pos terminal block425 - 003Motor, Bison175 - 180Strain relief, 1/2"© GBC Pro - Tech April 1999 Page 6 - 8

GBC Pro - Tech Parts ManualO I SP : Drive Side - Hardware730 - 005Side frame, drive001 - 251Shim Disk, pull, drive001 - 382Assembly, lever booster001 - 249Shim Disk, main, drive001 - 195Assembly, main cylinder001 - 197Assembly, pull cylinder435 - 175Sprocket, rewind001 - 187Bearing block, main roll672 - 007Plate, main roll24DPBIMBA375 - 170Clutch440 - 130Sprocket, idlers400 - 152Chain, primary435 - 002Sprocket, main roll040 - 022Tapered bushing400 - 151Chain, secondary001 - 184Assembly, self tensioner001 - 290Assembly, tensioner435 - 175Sprocket, rewind001 - 289Sprocket, drive425 - 255Sprocket, motor440 - 130Sprocket, idlers© GBC Pro - Tech April 1999 Page 6 - 9

© GBC Pro - Tech April 1999 Page 6 - 10001 - 349Assembly, output idlers690 - 024Rolls, pull, upper690 - 025Rolls, pull, lower026 - 100Bearings, lower pull roll425 - 003Motor, Bison770 - 374Tie bars, grayDrive Side700 - 001Saddle, shaft, rear001 - 185Assembly, rewinds, drive690 - 057Rolls, main098 - 002Plungers, retractable001 - 295Assembly, frame, infeed table001 - 296Assembly, slitter idler001 - 482Assembly, saddle, unwind086 - 100Pins, pull700 - 002Saddle, shaft, front510 - 103Brackets, castor001 - 314Assembly, knob, slitter001 - 299Assembly, infeed slitters672 - 016Pressure plate501 - 010Block, stop, table001 - 297Assembly, infeed table510 - 121Brackets, clevis, unwind470 - 130CastorsControl Side001 - 181Assembly, rewind, brake001 - 158Assembly, brakes001 - 122Assembly, Output Slitters710 - 053Shaft, pull, upper520 - 027Tie bars770 - 373Tie bars860 - 004Tube, idler001 - 210Assembly, filter, airGBC Pro - Tech Parts ManualO I SP : Bridge And Inside Parts

© GBC Pro - Tech April 1999 Page 6 - 11FG3218451ENOTE:REPLACE SUPPLIED BOLTSWITH ITEM 20TIGHTEN -11- ONTO -15- UNTIL ALL OF -9- ISPILOTED ON -14-. THE -13- AND -14- MUSTROTATE FREELY TOGETHER ON -15-.BLUE LOCTITE -11- TO -15-.1776119128EAJH2/15/99 3270AJH12/16/97 3006MS10-29-96 2591RAS9-20-95 1122J.S.6-13-95 1013P.R.9-21-94 0667P.R.5-17-94 0442REVISIONG19GGFGREQ'D DESCRIPTIONPART NO. ITEM1 ARM, SLITTER 740-006 11 COLLAR, INFEED SLITTER 740-052 21 SCREW, THUMB 505-010 31 SPRING, TENSION 089-150 41 ROLL PIN, 1/8 X 1/2 LG 095-100 51 DOWEL PIN, 3/16 X 1/2 LG 095-140 61 ROLL PIN, 3/32 X 5/8 LG 095-120 72 WASHER, CONCAVE 740-007 81 BEARING, THRUST, 5/16 X 5/8 032-003 9- - - 101 NUT, NYLOCK, 8-32 - 112 WASHER, THRUST, 5/16 X 5/8 032-004 121 BLADE, SLITTER, CIRCULAR 475-001 131 FLANGED BUSHING, STEEL 040-037 141 STRIP, 3/16 X 3/4 050-032 151 WASHER, THRUST, 3/16 X 1/2 032-005 161 LABEL, WARNING 450-012 171 RIVET, FLTHEAD, 1/8 X 1/4 X 1/4 LG - 182 O-RING 480-030 192 SHCS,STAINLESS STEEL 5/16-24 X 3/4 - 2013FEDCBA14GREASE I.D. WITHBEARING GREASELIKE DOW 44.This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDE2117 N. Stoughton Rd. Madison, WisconsinDIM.TOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/ P 1/BETITLEX 64:12X PSLITTER, INPUT5. .050X. PO2, O3, O1SPX .020X.X P ANGLEDATEDRAWNDWG DwgX .010:BY:SCALE::SPX.XX P1D 05-16-94 P.R. C1X .0051615Pro-Tech EngineeringF001-122GBC Pro - Tech Parts ManualO I SP : 001 - 122 Slittiers, Output

N© GBC Pro - Tech April 1999 Page 6 - 12UDETAILA DISC SPRINGORIENTATION3X SCALEREQ'DDESCRIPTIONPART NO. ITEM1 PIN, PIVOT, UNWIND 625-008 12 BUSHING, FLANGE, NYLON 500-006 21 HOUSING, BRAKE 625-022 31 ROLL PIN, 1/8 X 1-3/4 095-105 41 PISTON, BRAKE 625-019 54 SPRING, DISC, 3/4 X 1-1/2 089-009 61 PAD, BRAKE, TOP 625-020 71 PAD, BRAKE, BOTTOM 625-021 81 KNOB, ADJUSTMENT, BRAKE 465-020 92154GTS4-8-2536962507961166951161950937RLM1-25-P.RED11-01- .P.R10-26- .RAS3-03-95REVISIOCBA89SHEET 11OFUNLESS OTHERWISESPECIFIEDTOLERANCEDIM.FINISSHOWNAS TOL.HX/ P 1/TO BEX 64X P 125. .050X. PX .020X.X PANGLESX .010X.XX PP 1DX .005TITLE:367SEE DETAIL A24151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532 Fax (608) 246-864511-15-DATE:DRAWN BY:94 RARELEASENOS.PRO-TECHRASSEMBLY, BRAKE-SCALE:1/1SIZE:CDwg:001-158GBC Pro - Tech Parts ManualO I SP : 001 - 158 Unwind Brakes

R© GBC Pro - Tech April 1999 Page 6 - 13119 101 2 3SECTIONA-SCALE: 1/ A18 7456REQ'DDESCRIPTIONPART NO. ITEM1 PLUG, CLUTCH, ORCA I X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SPRING CLIP, 5100-100 090-140 71 COMPRESSION SPRING, C1225-105-1500M 089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 11AREVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM.SHOWTOLASFINIS.NTO HX/ P 1/BEX 64 12X P5. .050X. PX .020X.X PANGLESX .010PX.XX P1DX .005TITLE:DATE 11-15-94:RELEASENO.4151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-8645DRAWN BY: SCALE:RAS 1:2PRO-TECHASSY, REWIND, BRAKEORCA 1SIZE:CDwg:001-181GBC Pro - Tech Parts ManualO I SP : 001 - 181 Rewind Brakes

N© GBC Pro - Tech April 1999 Page 6 - 14A 6A 43A51REQ'D DESCRIPTIONPART NO. ITEM1 TENSIONER, CHAIN 440-150 11 SPROCKET, 19T 440-130 21 ROD, THREADED, 1/2 - 13 X 3.25 645-018 31 NUT, JAM, SELF-LOCKING, 1/2-13 - 41 NUT, NYLOCK, 1/2-13 - 52 NUT, 1/2-13 - 62K.L.10-30-95 1063REVISIOAThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDE2117 N. Stoughton Rd. Madison, WisconsinDIM.TOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/TITLEBEP 1/64X:X125P .050ASSY,TENSIONER,CHAIN.X.P .020-XX.XANGLEDATEDRAWNDWG DwgP .010X:BY:SCALE::SP 11-16-CX.XX1DP .005K.L.X941Pro-Tech Engineering001-184GBC Pro - Tech Parts ManualO I SP : 001 - 184 Self Tensioning Idler

NR© GBC Pro - Tech April 1999 Page 6 - 1568593421110SECTION1A-ASCALE: 2/1REQ'DDESCRIPTIONAREVISIOSHEET 11OFUNLESS OTHERWISETOLERANCSPECIFIEDEDIM.TOLSHOW ASFINIS.NTO HX/ P 1/ BEX 64 12X P5. .050X. PX .020X.X P ANGLEX .010SPX.XX P1DX .005ATITLE:PART NO.1 PLUG, CLUTCH DRIVE 001-261 11 WASHER, THRUST, .090 THK 032-420 21 WASHER, THRUST .030 THK 032-410 31 BEARING, THRUST 032-400 41 BUSHING, BOST-BRONZE 500-003 51 KEY, 1/4 X 1/4 X 3/8 LG - 6- - - 71 LOCK NUT, 5/8-11 - 81 SPROCKET, 35BS20x5/8 435-175 94 WASHER, THRUST, .090 THK 032-205 10ASSY, REWIND,ORCA DRIVE1DRAWN SCALEBY::RAS 1:2SIZE:CDwg:ITEM1 BEARING, THRUST 032-190 114151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532Fax (608) 246-8645PRO-TECHDATE 11-15-: 94RELEASENO.001-185GBC Pro - Tech Parts ManualO I SP : 001 - 185 Rewind Drive

© GBC Pro - Tech April 1999 Page 6 - 1612REQ'D DESCRIPTIONPART NO. ITEM1 BLOCK,BEARING,MAIN ROLL,ORCA I 501-009 11 BEARING,NEEDLE,OUTTER RACE 028-000 21 BEARING,NEEDLE,INNER RACE 028-001 31 GREASE FITTING 060-005 43RAS4-12-95 REVISION0959A4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:11-17-94 K.L. A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645BLK,BRG,LEFT,MAIN ROLLORCA IDwg:001-187GBC Pro - Tech Parts ManualO I SP : 001 - 187 Bearing Block, Main Roll

N© GBC Pro - Tech April 1999 Page 6 - 17137512 161011PLACE WASHER UNDER SHIM DISK6151417REQ'D DESCRIPTIONPART NO. ITEM1 CYLINDER,2.5 X 1.7514 SHCS,5/16-18 X .75 - 24 WASHER,LOCK,5/16 - 31 COUPLING,ROD END,1/2-20 325-000 42 CONTROL,FLOW 330-130 52 FITTING,STRAIGHT,1/4NPT X 1/4 330-600 61 LOCK COLLAR,1/2-20 290-260 71 SHCS,1/2-20 X .5 -81 STUD, THREADED, 1/2 - 20 x 1" 645-007 91 ASSEMBLY,SHIM DISK,LEFT 001-249 101 PLUNGER,SPRING,1/4-20 098-120 111 BOLT,SHOULDER,3/8,1.0,5/16-18 - 121 STUD, THREADED, 1/2 - 20 x 1-3/4" 645-006 131 ASSEMBLY,BLOCK,BEARING,LEFT,MAIN ROLL 001-187 14412 39RL5/2/ M2745RL 974-12- M2539RA 965-18- S098495RAS4-13-95 0968RAS3-01-95 0913RAS2-21-95 0892REVISIOFEDCBA320-3201 WASHER,THRUST,.060 068-100 151 WASHER,THRUST,.312 X .06 032-360 161 1\2-20 HEX JAM NUT - 17This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDEDIM. AS2117 N. Stoughton Rd. Madison, Wisconsin 53704SHOW TOL.FINISHPhone (608) 246-8844 Fax (608) 246-4685NX/ P 1/ TO BETITLE:X 64 12X5P .050.X.X P .020X.XDwgP .010 ANGLESDATE: DRAWN BY: DWG SCALE::XPX.XX P 1D 11-29-94 RAS C2X .005Pro-Tech EngineeringASSEMBLY,CYLINDER,MAIN,LEFT-001-195GBC Pro - Tech Parts ManualO I SP : 001 - 195 Cylinder, Main Roll, Drive Side

© GBC Pro - Tech April 1999 Page 6 - 1820 211115171 2 4 36 7 16859 10131819125DESCRIPTIONREQ'D PART NO. ITEM11 ASSEMBLY,CYLINDER,PULL ROLL,LF1 SHAFT,PULL ROLL,UPPER 710-041 22 BUSHING,BRONZE,1,1.38,1 040-015 31 ROLL,PULL,UPPER,ORCA I 690-027 44 RING,SNAP,1.0 090-140 51 CLUTCH 375-170 61 FITTING,STRAIGHT,1/8 X 1/4 330-590 71 SHAFT,ROLL,PULL,LOWER 710-042 81 ROLL,PULL,LOWER 690-028 92 BUSHING,KEYLESS,1,1.75 040-017 102 BRACKET,MOUNTING,PHOTOEYE,PULL ROLL 510-107 111 ASSEMBLY,CYLINDER,PULL ROLL,RT 001-207 122 WASHER,THRUST,1.0 X .06 032-250 131 SWITCH,PHOTOEYE,EMITTER 250-002 141 SWITCH,PHOTOEYE,RECEIVER 250-001 151 EYEBOLT,1/4-20 - 162 LOCK COLLAR, MODIFIED 640-001 172 ASSEMBLY,BEARING 001-288 184 SHCS,3/8-16 X .75 - 192 SHCS,1/4-20 X 3/8 - 202 WASHER,LOCK,1/4 - 21REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX17TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY,ROLL,PULL-DATE: DRAWN BY: DWG SCALE:11-30-94 RAS C4001-19720Dwg:142111001-196GBC Pro - Tech Parts ManualO I SP : 001 - 196 Assembly, Pull Roll ( CNO )

© GBC Pro - Tech April 1999 Page 6 - 19DCBA44131011 1216723331814151916 178 94 5DE2REQ'DRLM5/2/97 2745GTS2-18-97 2665RAS8-25-95 1089RAS7-18-95 1044EDCB21 CYLINDER,1.5 X 2 320-190 11 CLEVIS,CYLINDER,7/16-20 325-001 21 SCREW,SHOULDER,3/8 X 1,5/16-18 - 32 CONTROL,FLOW,1/8NPT 330-120 42 FITTING,STRAIGHT,1/8 X 1/4 330-590 51 BRACKET,MOUNTING,CYLINDER 325-110 61 NUT,HEX,3/4-16 - 72 SHCS,1/4-20 X .5 - 82 WASHER,LOCK,1/4 - 91 BRACKET, SHIM DISK, LEFT 510-220 102 SHCS,5/16-18 X .62 - 112 WASHER,LOCK,5/16 - 121 COLLAR,LOCK,7/16 290-220 131 ASSEMBLY,SHIM DISK,PULL,LEFT 001-251 141 WASHER,THRUST,.312 X .06 032-360 151 PLUNGER,SPRING,1/4-20 098-120 161 NUT,HEX,JAM - 171 BOLT,SHOULDER,3/8,1.0,5/16-18 - 181 NUT,HEX,5/16-18 - 19RAS3-01-95 0915REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:DATE: 11-29-94RELEASENO.DRAWN BY:RSCALE:1PART NO.PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,CYLINDER,PULL ROLL,LEFT-RAS 1:21SIZE:BDwg:ITEM001-197DCBAGBC Pro - Tech Parts ManualO I SP : 001 - 197 Cylinder, Pull Roll, Drive Side

N© GBC Pro - Tech April 1999 Page 6 - 2065BAEB P EAROTATE FITTINGS AS REQUIRED FOR BESTASSEMBLY41REQ'D DESCRIPTIONPART NO. ITEM1 VALVE, AIR, SOLENOID 350-115 13 FITTING,AIR,ELBOW,1/4NPT 330-760 23 Y-FITTING,1/4NPT 330-310 31 MUFFLER, AIR 330-280 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330-730 52 CAP SCREWS, SOCKET, #10-32 X 1-1/4 LG - 62 3REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISEPro-TechTOLERANCSPECIFEDEDIM.2117 N. EngineeringStoughton Rd. Madison, WisconsinTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTOH4685X/TITLEBEP 1/64X:X125P .050.X.P .020XX.XANGLEDATEDRAWNDWG DwgP .010X:BY:SCALE::SP 12-9-CX.XX1DP .005K.L.X941ASSEMBLY,VALVE,CONTROL001-205GBC Pro - Tech Parts ManualO I SP : 001 - 205 Air Solenoid Valve, Main Roll

© GBC Pro - Tech April 1999 Page 6 - 2113 29 410111514PLACE WASHER UNDER SHIM DISK 166125REQ'D DESCRIPTIONPART NO. ITEM1 CYLINDER,2.5 X 1.75 320-320 14 SHCS,5/16-18 X .75 - 24 WASHER,LOCK,5/16 - 31 COUPLING,ROD END,1/2-20 325-000 42 CONTROL,FLOW 330-130 52 FITTING,STRAIGHT,1/4NPT X 1/4 330-600 61 LOCK COLLAR,1/2-20 290-260 71 SHCS,1/2-20 X .5 81 STUD, THREADED, 1/2 - 20 x 1" 645-007 91 ASSEMBLY,SHIM DISK,MAIN,RIGHT 001-250 101 PLUNGER,SPRING,1/4-20 098-120 111 BOLT,SHOULDER,3/8,1.0,5/16-18 - 121 STUD, THREADED, 1/2 - 20 x 1-3/4" 645-006 131 ASSEMBLY,BLOCK,BEARING 001-187 142 WASHER,THRUST,.06 032-140 151 WASHER,THRUST,.312 X .06 032-360 161 1\2-20 HEX JAM NUT - 17713172745E0985D0960C3-01-95S 0914B0891RLM5/2/97RAS5-18-95RAS4-12-95RARA2-21-95SREVISIONAThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDPro-Tech EngineeringEDIM.2117 N. Stoughton Rd. Madison, WisconsinSHOWN AS TOL. FINISH Phone (608) 246-8844 53704 Fax (608) 246-4685X/TO BEP 1/64TITLE:X125ASSEMBLY,CYLINDER,MAIN,RX. P .050TX.P .020-XX.XANGLE DATEDRAWNDwgP .010DWG SCALE:XSP :BY::X.XXRAP .005 1D 11-29-94C2S001-206XGBC Pro - Tech Parts ManualO I SP : 001 - 206 Cylinder, Main Roll, Control Side

© GBC Pro - Tech April 1999 Page 6 - 22PLACE WASHER UNDER SHIM DISK1519 181417 1612 115 49 8131016723REQ'D DESCRIPTIONPART NO. ITEM1 CYLINDER,1.5 X 2 320-190 11 CLEVIS,CYLINDER,7/16-20 325-001 21 SCREW,SHOULDER,3/8 X 1,5/16-18 - 32 CONTROL,FLOW,1/8NPT 330-120 42 FITTING,STRAIGHT,1/8 X 1/4 330-590 51 BRACKET,MOUNTING,CYLINDER 325-110 61 NUT,HEX,3/4-16 - 72 SHCS,1/4-20 X .5 - 82 WASHER,LOCK,1/4 - 91 BRACKET,MOUNTING,SHIM,CYLINDER 510-132 102 SHCS,5/16-18 X .62 - 112 WASHER,LOCK,5/16 - 121 COLLAR,LOCK,7/16 290-220 131 ASSEMBLY,SHIM DISK,PULL,RIGHT 001-252 141 WASHER,THRUST,.312 X .06 032-360 151 PLUNGER,SPRING,1/4-20 098-120 161 NUT,HEX,JAM - 171 BOLT,SHOULDER,3/8,1.0,5/16-18 - 181 NUT,HEX,5/16-18 - 19274597109095104595091695RL5/2/ MRA8-25- SRA7-18- SRA3-01- SDCBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISE SPECIFEDTOLERANCPro-Tech EngineeringEDIM.2117 N. Stoughton Rd. Madison, Wisconsin 53704SHOW AS TOL. FINISPhone (608) 246-8844 Fax (608) 246-8645NHTOX/BEP 1/64TITLE:X125X. P .050X.P .020XX.XP .010 ANGLESDATE: DRAWN BY: DWG SCALE: Dwg:XX.XXP 1DRA11-29-94C2P .005XSASSY,CYLINDER,PULL ROLL,RIGHT-001-207GBC Pro - Tech Parts ManualO I SP : 001 - 207 Cylinder, Pull Roll, Control Side

N© GBC Pro - Tech April 1999 Page 6 - 2332785REQ'D DESCRIPTIONPART NO. ITEM1 FILTER,NAF-2000-N02-C 340-250 11 FITTING,AIR,ELBOW,1/4NPT 330-760 21 COUPLE,KWIK 711 330-260 31 BRKT.,FILTER,B-240 100-220 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330-730 52 SHCS,10-32 x .5 - 61 AIR,FITTING,UNION-Y 330-305 713' TUBING, PNEUMATIC, FLAME-RETARDENT 360-001 862520RLM2-21-96 REVISIOA14This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISESPECIFEDPro-TechTOLERANCEEngineeringDIM.2117 N. Stoughton Rd. Madison, WisconsinAS TOL. FINISPhone (608) 246-8844 53704 Fax (608) 246-SHOWNH8645X/ P 1/TO BETITLE:X 64X P 125ASSEMBLY,FILTER,AIR. .050X. PX .020X.X PDwgANGLES DATE: DRAWN BY: DWG SCALE:X .010:X.XX P P 1D 12-9-K.LC1X .00594.001-210GBC Pro - Tech Parts ManualO I SP : 001 - 210 Air Filter

© GBC Pro - Tech April 1999 Page 6 - 24REQ'D DESCRIPTIONPART NO. ITEM1 HEXHEAD BOLT, MOD, 1/4-20 X 2.5 505-001 11 CAP,VINYL 465-014 21 2REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:12-19-94 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,HANDLE,CAMORCA IDwg:001-217GBC Pro - Tech Parts ManualO I SP : 001 - 217 Handle, Cam, Table Idler

© GBC Pro - Tech April 1999 Page 6 - 25REQ'D DESCRIPTIONPART NO. ITEM1 IDLER,INFEED,PAPER 620-013 12 BUSHING,BRONZ,.5 X .75 X .625 040-026 21PRESS IN BUSHING.505 DIA REAM BUSHINGEACH ENDREVISION2This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:12-15-94 RAS C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,IDLER,INFEED,PAPERORCA 1Dwg:001-218GBC Pro - Tech Parts ManualO I SP : 001 - 218Idler, Infeed Paper

© GBC Pro - Tech April 1999 Page 6 - 26PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC3.25REQ'D- DIN RAIL 217-200 -4.2510.50 13.25REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:DATE: 7-19-96RELEASENO.4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645SET, DIN RAILORCA IDRAWN BY:RPRO-TECHSCALE:RLM 1/1PART NO.SIZE:ADwg:ITEM001-233GBC Pro - Tech Parts ManualO I SP : 001 - 233 Din Rail Set

© GBC Pro - Tech April 1999 Page 6 - 271/163/3201/83/163/81/423/16 1/4 3/81/2REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,MAIN LEFTORCA I3-01-95 RAS A1Dwg:001-249GBC Pro - Tech Parts ManualO I SP : 001 - 249 Main Roll Shim Disk, Drive

© GBC Pro - Tech April 1999 Page 6 - 281/41/83/163/323/801/223/8 1/2 01/16REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,MAIN RIGHTORCA I3-01-95 RAS A1Dwg:001-250GBC Pro - Tech Parts ManualO I SP : 001 - 250 Main Roll Shim Disk, Control

© GBC Pro - Tech April 1999 Page 6 - 293/321/81/1603/16 1/415.0°3/16 1/421/23/8REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:3-01-95 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,PULL,LEFTORCA IDwg:001-251GBC Pro - Tech Parts ManualO I SP : 001 - 251 Pull Roll Shim Disk, Drive

© GBC Pro - Tech April 1999 Page 6 - 303/81/43/161/2015.0°1/2 01/821/163/32REQ'D DESCRIPTIONPART NO. ITEM1 SHIM DISK 720-019 11 OVERLAY,SHIM DISK,MAIN ROLL 450-021 2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005INDICATES POSITION OF LABELAROUND CIRCUMFERANCE1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:3-01-95 RAS A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SHIM DISK,PULL,RIGHTORCA IDwg:001-252GBC Pro - Tech Parts ManualO I SP : 001 - 252 Pull Roll Shim Disk, Control

© GBC Pro - Tech April 1999 Page 6 - 31REQ'D DESCRIPTIONPART NO. ITEM1 SPROCKET,DRIVE,MODIFIED 750-000 12 BEARING,NEEDLE 028-002 212REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SPROCKET,DRIVE-DATE: DRAWN BY: DWG SCALE:4-13-95 RAS A1Dwg:001-289GBC Pro - Tech Parts ManualO I SP : 001 - 289 Sprocket, Drive

© GBC Pro - Tech April 1999 Page 6 - 32DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4C633 4 538 APPLY BLUE LOCTITE17292REQ'D DESCRIPTION PART NO. ITEM1 SHFT,IDL,.5/SO1 440-110 11 SPRKT,35,13T,.5/35BS13F 440-125 21 IDLER BASE 440-002 32 HEX HEAD BOLT,1/4-20 X .875 - 41 WASHER,FLAT,1/4 - 51 HEX HEAD BOLT,5/16-18 X .875 - 61 SAE WASHER,FLAT,1/2 OD X 1/4 ID - 71 SET SCREW 10-32 X .25 - 81 SET SCREW 1/4-20 X .25 - 9APPLY BLUE LOCTITEAPPLY BLUE LOCTITEAPPLY BLUE LOCTITE22543MS8-8-96REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:DATE: 4-17-95 DRAWN BY: SCALE:RELEASERAS 1/1NO.R1PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,TENSIONER,CHAINORCA 11SIZE:BDwg:001-290DCBAGBC Pro - Tech Parts ManualO I SP : 001 - 290 Adjustable Chain Tensioner

© GBC Pro - Tech April 1999 Page 6 - 3351REQ'D DESCRIPTIONPART NO. ITEM61 ASSEMBLY,IDLER,INFEED,PAPER 001-218 11 SHAFT,IDLER,INFEED,PAPER 710-054 22 CAM,LIFTING,IDLER 525-005 32 SET SCREW,1/4-20 X .375 - 42 ASSEMBLY,HANDLE,CAM 001-217 51 IDLER, INFEED, PAPER 620 - 013 62 BUSHING, BRONZE, .5 X .75 X .625 040 - 026 724GT3S26514151 Anderson Road, DeForest, WisconsinPhone (608) 246-8844 53532 Fax (608) 246-86451-30-97REVISIONASHEET 1 1OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/X.X.XX.XXX.XXX7TOL.P 1/64 P.050P.020P.010P.005FINISHTO BE125ANGLESP 1DTITLE:DATE: 5-8-95 DRAWN BY:RASSCALE:1:4RELEASE NỌRPRO-TECHASSEMBLY,IDLER,INFEED,PAPERORCA 1SIZE: Dwg:C001-294GBC Pro - Tech Parts ManualO I SP : 001 - 294 Idler, Infeed, Paper

© GBC Pro - Tech April 1999 Page 6 - 341519111 236 58 714BAA10REQ'D DESCRIPTIONPART NO. ITEM1 EXTRUSION,MOD 110-017 11 EXTRUSION,MOD 110-019 21 EXTRUSION,MOD 110-018 32 EXTRUSION,MOD 110-024 42 SHCS,5/16-18 X 5/8 - 52 5/16-18 ECONOMY T-NUT 050-003 64 SHCS,1/4-20 X 1/2 - 74 1/4-20 ECONOMY T-NUT 050-001 82 BRACKET,MOUNTING,EXTRUSION 510-128 96 END FASTENER,1/4-20 100-018 102 COVER,T-SLOT 465-013 112 END CAP 465-012 124 FASTENER,PUSH-IN 100-020 131 BRACKET,PIVOT,TABLE,RIGHT 510-140 141 BRACKET,PIVOT,TABLE,LEFT 510-145 158 SHCS,1/4-20 X .5 - 168 T-NUT,1/4-20 050-001 172 1/4 DIA X 5/8 DOWEL PIN 095-191 181 SLITTER IDLER 001-298 19RAS11-02-95 2596K.L.9-11-95 1102REVISIONBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1D916 17 18TITLE:41012 13DATE: DRAWN BY: DWG SCALE:5-8-95 RAS C4Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,FRAME,TABLE,ORCA IORCA IDwg:001-295GBC Pro - Tech Parts ManualO I SP : 001 - 295 Frame, Infeed Table

© GBC Pro - Tech April 1999 Page 6 - 35REQ'D DESCRIPTIONPART NO. ITEM2 BEARING, IDLER 020-100 11 TUBE, SLITTER, PVC 490-001 21 ROLL, IDLER 620-016 31132REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,IDLER,SLITTER,PAPERORCA IDATE: DRAWN BY: DWG SCALE:5-08-95 RAS C1Dwg:001-296GBC Pro - Tech Parts ManualO I SP : 001 - 296 Idler, Slitter

© GBC Pro - Tech April 1999 Page 6 - 36122 3 4 5 61SECTION "A-A"18(SLITTEROPTION)12REQ'D DESCRIPTIONPART NO. ITEMA1 ASSEMBLY,FRAME,TABLE 001-295 11 TABLE COMPONENT,TOP,FRONT 760-030 22 BRACKET,ANGLE 100-023 32 SCREW,WOOD,PAN HEAD, #12 X .75 - 46 T-NUT,1/4-20 050-001 54 BHCS,1/4-20 X 1/4 - 61 TABLE COMPONENT,PRESSURE PLATE 672-016 72 SHOULDER BOLT,5/16 X .38,1/4-20 - 81 TABLE COMPONENT,TOP,BACK 760-029 93 BHCS,5/16-18 X 3/8 - 103 T-NUT,5/16-18 050-003 112 COMPRESSION SPRING, LC - 032 - F3 098-002 122 SHOULDER BOLT,1/2 DIA,3/8-16 X .5 LG - 134 BLOCK,STOP,PIVOT,TABLE 501-010 148 SHCS,5/16-18 X .625 - 154 SHCS,1/4-20 X 1.25 - 164 NUT,JAM,HEX,1/4-20 - 171 FELT STRIP,BLACK,2-1/4 WIDE 499-002 181 ASSEMBLY,IDLER,INFEED 001-294 19148 51313 15AAAK.L.9-5-95 1099REVISIONAASHEET1911 101 OF 19UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .0055 67TITLE:DATE:RELEASENO.R PRO-TECH14DRAWN BY: SCALE: SIZE:RAS 1:4 C45 6316 17154151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, TABLE, ORCA 1-5-9-95Dwg:001-297GBC Pro - Tech Parts ManualO I SP : 001 - 297 Infeed Table

© GBC Pro - Tech April 1999 Page 6 - 37REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT,IDLER,SLITTER,PAPER 710-055 11 ASSEMBLY,IDLER,SLITTER,PAPER 001-296 22 BHCS,3/8-16 X .5 - 31 SLITTER TUBE 490 - 001 42 BEARINGS IDLER 020 - 100 51 24REVISION53This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDPro-TechEDIM.2117 N. Stoughton Rd. Madison, WisconsinEngineeringTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/ P 1/TITLBEX 64E:12X P 5 ASSEMBLY,SLITTER,IDLER. .050X. PORCA IX .020X.X P ANGLEDATDRAWNDWG DwgX .010E:BY:SCALE: :SPX.XX P1D 5-9-95 RAS C4X .005001-298GBC Pro - Tech Parts ManualO I SP : 001 - 298 Slitter Idler

© GBC Pro - Tech April 1999 Page 6 - 38201BC637 8 94 5TIGHTEN -13- ONTO -17- UNTIL ALL OF -11- IS PILOTED ON -17-.THE -15- AND -16- MUST ROTATE FREELY TOGETHER ON -17-.BLUE LOCTITE -13- TO -17-.2191311141021CCBCREQ'D DESCRIPTIONPART NO. ITEM1 ARM,SLITTER 740-008 11 BLOCK,PIVOT,SLITTER,INFEED 740-009 21 BOLT,SHOULDER,1/4,.75,10-24 - 31 SET SCREW,FLAT POINT,1/4-20 X .5 - 41 SPRING,TENSION 089-150 51 SCREW,THUMB,1/4-20 X 2.0 092-130 61 ASSEMBLY,KNOB 001-314 71 WASHER,FLAT,1/4 - 81 T-NUT,1/4-20 050-001 92 WASHER, CONCAVE 740-007 101 BEARING, THRUST, 5/16 X 5/8 032-003 11- - - 121 NUT, NYLOCK, 8-32 - 132 WASHER, THRUST, 5/16 X 5/8 032-004 141 BLADE, SLITTER, CIRCULAR 475-001 151 FLANGED BUSHING, STEEL 040-037 161 STRIP, 3/16 X 3/4 050-032 171 WASHER, THRUST, 3/16 X 1/2 032-005 181 RIVET,FLATHEAD,1/8 X 1/4 X 1/4 Lg - 191 WARNING LABEL 450-012 202 O-RING 480-030 2115AJH2/15/99 3269AJH12/16/97 3006RAS9-20-95 1123CBAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .00516FINISHTO BE125ANGLESP 1DGREASE I.D. WITHBEARING GREASELIKE DOW 44.TITLE:1817Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,SLITTER,INFEEDORCA IDATE: DRAWN BY: DWG SCALE:6-12-95 RAS A1Dwg:B001-299GBC Pro - Tech Parts ManualO I SP : 001 - 299 Infeed Slitters

© GBC Pro - Tech April 1999 Page 6 - 39AREQ'D DESCRIPTIONPART NO. ITEM1 KNOB,KNURLED 465-007 11 SET SCREW,FLATPOINT,1/4-20 X 2.0 050-012 22K.L.8-7-95 1065REVISIONA1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:7-21-95 RAS A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,KNOB,1/4-20ORCA IDwg:001-314GBC Pro - Tech Parts ManualO I SP : 001 - 314 Assembly, Knob, Infeed Slittiers

N© GBC Pro - Tech April 1999 Page 6 - 4065BAEB P EAROTATE FITTINGS AS REQUIRED FOR BESTASSEMBLY41REQ'D DESCRIPTIONPART NO. ITEM2 71 VALVE, AIR, SOLENOID 350-115 13 FITTING,AIR,ELBOW,1/4NPT 330-760 22 Y-FITTING,1/4NPT 330-310 31 MUFFLER, AIR 330-280 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330-730 52 CAP SCREWS, SOCKET, #10-32 X 1-1/4 LG - 61 RUN TEE T4X4 330-720 7REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISEPro-TechTOLERANCSPECIFEDE2117 EngineeringN. Stoughton Rd. Madison, WisconsinDIM.TOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H4685X/TITLEBEP 1/64X:X125P .050ASSEMBLY,VALVE,CONTROL.X.P .020XX.XANGLEDATEDRAWNDWG DwgP .010:BY:SCALE::XSP 10-20-CX.XX1DP .005RAS001-329X951GBC Pro - Tech Parts ManualO I SP : 001 - 329 Air Solenoid Valve, Pull Roll

© GBC Pro - Tech April 1999 Page 6 - 4111.4SolderSolder1REQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 TVS 1.5KE400CA 185-004 21.25" HEAT SHRINK TUBING, 1/4" X 250' 180-430 3REVISIONApply a heat shrink tube after soldering2 3This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:11-17-95 HZ A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY,TRANS. VOLT. SUPPRESSORORCA IDwg:001-338GBC Pro - Tech Parts ManualO I SP : 001 - 338 T.V.S. Assembly

SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .005TITLE:4-2-96RELEASENO.R4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645SIZE: Dwg:© GBC Pro - Tech April 1999 Page 6 - 42DCBA876543PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCNOTES:1. INTERPRET DRAWING PER ASME Y14.5M-1994.1098 41211165BBB472LOWER PULL ROLL BEARING BLOCKLOWER PULL ROLL BEARING BLOCK8 7 6 5 4 321REQ'DDESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, REAR, LFT 510-262 12 SUPPORT, BRACKET,TABLE 757-013 22 BHCS, 1/4-20 X 1 - 34 SCREW, ALLEN, FLT HD, 1/4-20 X 1 - 42 BLOCK, MOUNTING, CLAMP 501-014 51 BRACKET, TABLE, RR,RT 510-263 62 BHCS, 1/4-20 X 1 - 72 T-NUT 050-001 81 SUPPORT, TABLE 110-112 91 TABLE, OUTFEED 760-040 102 KNOB, LOCKDOWN 465-200 111 SETSCREW, 1/4-20 X 1 050-020 121 FIELD INSTALLATION INSTRUCTIONS 820-130 133REVISIONDATE: DRAWN BY: SCALE:RLM 1/1PRO-TECHTABLE, OUTFEED, ORCA IOPTION2 1D001-345DCBAGBC Pro - Tech Parts ManualO I SP : 001 - 345 Outfeed Table

SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.4-11-964151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RSCALE:SIZE:Dwg:© GBC Pro - Tech April 1999 Page 6 - 43DCBA87654321PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCREQ'DDESCRIPTIONPART NO. ITEM2 4 31 ASS'Y,SHAFT,OUTFEED SLITTER 001-346 11 BRACKET, OUTFEED SLITTER, RIGHT 510-184 21 BRACKET, OUTFEED SLITTER, LEFT 510-185 31 ASS'Y IDLER, REMOVABLE 001-347 41 ASS'Y, IDLER, SLITTER 001-348 52 BRACKET, HOLD DOWN, SLITTER IDLER 510-230 676 SHCS, 1/4-20 X 5/8 - 766517REVISIONPRO-TECHASSEMBLY, OUTFEED SLITTERORCA 18 7 6 5 4 32 1P.R. 1:1 D 001-349DCBAGBC Pro - Tech Parts ManualO I SP : 001 - 349 Outfeed Idlers

-© GBC Pro - Tech April 1999 Page 6 - 44DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHTO MAIN ROLLREGULATOR SUPPLY42CSMC33SMCNOTE:CUT AIR LINE 5 ANDINSTALL AS SHOWN21REQ'D2FROM TOP ELECTRICAL AIRVALVE SUPPLY LINE #56342DESCRIPTIONThis assembly is not completeto use for CE machines, itrequires a relieve valve fortrapped pressureMS9-23-96REVISIONA3SHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:DATE: 9-11-96RELEASENO.1PART NO.1 BOOSTER,AIR 340-000 12 SHCS 10 - 32 X 3/4" - 22 FITTING,ELBOW 330-730 31 MUFFLER 330-280 41 GUAGE,160 PSI (SHIPPED LOOSE) 340-001 51 FITTING,ADAPTER,1/4M X 1/4F 64151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RPRO-TECHASSEMBLY,BOOSTER,AIR,160 PSI-SCALE:RAS 1:1SIZE:CDwg:ITEM001-373DCBAGBC Pro - Tech Parts ManualO I SP : 001 - 373 Air Booster

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCSMCSMC*This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCE2117 N. Stoughton Rd. Madison, Wisconsin 53704DIM. ASTOL.Phone (608) 246-8844 Fax (608) 246-8645SHOWNFINISHTO BEX/X P 1/64TITLE:125X. P .050X.X P .020X.XX P .010 ANGLESDATE: DRAWN BY: DWG SCALE: Dwg:P 1DX.XXX P .005© GBC Pro - Tech April 1999 Page 6 - 45HGFEDCBA18765432PROPRIETARY24DP24DPBIMBABIMBA8 9TO UPPER PORTMAIN CYLTO BOTTOM PORTMAIN CYLATO VALVETO VALVE PORT "1"PORT "0"126413239 858 7 6 5 4 3 2 115 7ABIMBA24DPBIMBA24DPREQ'DDESCRIPTIONPART NO. ITEM2 CYLINDER,246-DP 320-000 12 CLEVIS 325-210 22 LEVER,BOOSTER 629-000 32 BLOCK,PIVOT,BOOSTER 501-022 42 MOUNT,CYLINDER,PIVOT 550-004 52 SHOULDER BOLT,.5 DIA,.75 LG - 62 SHOULDER BOLT,.375 DIA, .5 LG - 74 FLOW CONTROL,1/4 NPT 330-130 84 FITTING,Y,1/4 X 1/4 330-310 9101 BOOSTER 001-373 111 BRACKET,SENSOR 510-085 121 SENSOR 219-001 131 TACHOMETER 219-000 141 CABINET, REWORK, TACH 520-044 1511RAS12-5-96 2613REVISIONA1STUDSECTION A AB 3311DJGMOVED PROXIMITY SENSOR PREVIOUSLY SHOWN AT MOTOR SPROCKETTO NEW POSITION AT DOUBLE IDLER SPROCKET.4/19/99REV ECN BY DESCRIPTIONPro-Tech EngineeringASSEMBLY,LEVER,BOOSTERSCOTCHPRINT, ORCA 110-15-96 RAS E001-382HGFEDCBAGBC Pro - Tech Parts ManualO I SP : 001 - 382 Lever Booster

© GBC Pro - Tech April 1999 Page 6 - 46DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH(5)4C(5)52333REQ'D1422DESCRIPTIONREVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005#REF!FINISHTO BE125ANGLESP 1DTITLE:#REF!#REF!1PART NO.1 SADDLE, PAPER UNWIND 700-015 11 LEVER, CATCH, SADDLE 629-019 21 PIN, QUICK RELEASE 086-005 31 PIN, DOWEL, 1/4 X 1-1/4 095-170 43 SHCS, 3/8-16 X 1 - 5UASSEMBLY INSTRUCTIONS1. ATTACH CATCH LEVER (629-019) TO SADDLE (700-015)WITH DOWEL PIN (095-170). DOWEL PIN TO SIT FLUSH ORSLIGHTLY BELOW SURFACE. CATCH MECHANISM SHOULD MOVEFREELY (NO BINDING).2. INSERT QUICK RELEASE PIN INTO TOP OF SADDLE3. SADDLE MOUNTS TO SIDE FRAME USING 3/8-16 X 1 SHCS(USED AT MIDDLE UNWIND POSITION)4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: #REF! DRAWN BY: SCALE:RELEASE#REF! #REF!NO. #REF!1PRO-TECHRSIZE:#REF!Dwg:ITEM#REF!DCBAGBC Pro - Tech Parts ManualO I SP : 001 - 482 Saddle, Unwind, Paper

© GBC Pro - Tech April 1999 Page 6 - 47PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDMANUFACTURE OR FOR ANY FOROTHER PURPOSE WITHOUTPERMISSION WRITTEN FROM GBC PRO-TECHNOTES:1. PARTS ARE SHIPPED LOOSE.1CA3373526AAAAAINSULATING SLEEVE(REMOVED)REQ'D4 SPACER, HEATER SPRING 755-061 14 SPRING 089-022 2- SLEEVE, INSULATING 180-006 38 CABLE TIE, 8" STOCK 41 INSTRUCTIONS, HEATER TENSION 820-063 5AJH7/20/98 3148AREVISIONSHEET 1937 OF -UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONFINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.3-21-98DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645KIT, HEATER TENSIONORCA I, ORCA I SP1937SCALE:PART NO.4 #10 EXTERNAL LOCK WASHERS - 6434SIZE:BJT 1:1 ADwg:ITEM005-028GBC Pro - Tech Parts ManualO I SP : 005 - 028 Spring Tension Kit, Heaters

© GBC Pro - Tech April 1999 Page 6 - 481217.516.04.04.05.55.511.011.015.015.09.09.0REQ'D DESCRIPTIONPART NO. ITEM- WIRE DUCT, 1" COVER, GREY 180-130 1- WIRE DUCT, 1" X 1.5" WITH ADHESIVE 180-140 2- WIRE DUCT, 1" X 1" CHANNEL WITH ADHESIVE 180-110 3316.016.010.010.0REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:26.026.04.04.0Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:07-10-96 RLM C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645DUCT,WIRE, SET, MAIN CHASSISORCA IDwg:180-150GBC Pro - Tech Parts ManualO I SP : 180 - 150 Wire Duct Set

GBC Pro - Tech Parts ManualOrca IIIllustrated Parts Diagrams( 000 - 001 )Available Options ;001 - 052 ( Vacuum table )001 - 084 ( Outfeed table )001 - 122 ( Infeed Slitters )© GBC Pro - Tech April 1999 Page 7 - 1

COM115V 230V12VAC© GBC Pro - Tech April 1999 Page 7 - 2X92 - 0084Cabinet, drive214 - 313Push button, E-Stop450 - 032Red stripeDrive SideORCA IIBYPro - Tech450 - 100Decal, Orca IIX92 - 0144Knob, shim214 - 314Contact, E-Stop001 - 090Front control panel001 - 071Panel, I.R. sensor001 - 094Electrical Panel175 - 130Clamp, main power450 - 032Red stripeControl SideORCA II175 - 110Clamp, foot cordX92 - 0085Cabinet, control450 - 100Decal, Orca IIBYPro - TechX92 - 0144Knob, shim001 - 068Rear control panel001 - 167Accessory pack 214 - 263FootswitchGBC Pro - Tech Parts ManualO II : Cabinets

© GBC Pro - Tech April 1999 Page 7 - 3001 - 050Main cylinder, control001 - 086Bracket, infeed table, control001 - 123Idler, slitter001 - 061Blower, control001 - 001Unwind470 - 120Castor, wheels 001 - 103Filter / Luber001 - 114Core end001 - 005Idler, fixedX93 - 0114Main rollX93 - 0076Core support001 - 100Core end/brake770 - 400Tie bar, 2"001 - 002Rewind425 - 003Motor001 - 047Main cylinder, drive001 - 085Bracket, infeed table, drive770 - 395Tie bar, 2-3/8"001 - 062Blower, driveGBC Pro - Tech Parts ManualO II : Front View

© GBC Pro - Tech April 1999 Page 7 - 4645 - 009Bolt089 - 140Spring755 - 032Standoff095 - 135StandoffRemovable Idler Standoff / Modified001 - 088Bracket, rear table, controlX92 - 0085Cabinet, control001 - 051Main roll, upper001 - 006Idler, table001 - 084Table, large001 - 055Pull roll, upper001 - 110Outfeed slitters001 - 226Idler, removable001 - 056Pull roll, lower645 - 009Bolt089 - 140Spring755 - 033StandoffRemovable Idler Standoffs001 - 087Bracket, rear table, driveX92 - 0084Cabinet, drive001 - 053Main roll, lower001 - 083Table, smallGBC Pro - Tech Parts ManualO II : Top View

GBC Pro - Tech Parts ManualO II : Control Side001 - 050Main cylinder, control001 - 091Frame001 - 007Idler, webbing001 - 070Infrared sensor001 - 053Main roll, lower001 - 059Pull roll cylinder, control001 - 070Infrared sensor001 - 061Blower, control001 - 069Cable, safety001 - 051Main roll, upper001 - 108Switch, web idlers001 - 099Guage, web idlers001 - 063Encoder001 - 063Encoder001 - 007Idler, webbing001 - 065Air regulator001 - 066Air solenoid valve001 - 069Cable, safety001 - 066Air solenoid valve© GBC Pro - Tech April 1999 Page 7 - 5

GBC Pro - Tech Parts ManualO II : 001 - 094 Electrical Panel220 - 130HP resistorX93 - 0327Panel220 - 100Control, motor207 - 150Solid state relay220 - 110Barrier boardL2 A+ P3 P2 P1 I1 F+ F- L1 A-217 - 200Din rail, 12"33334217 - 170Rail end217 - 250Cover, jumper bar, 4mm217 - 240Jumper bar, 4mm5225 - 110Heat sink678910AA11217 - 160Terminal, fuse207 - 110Relay base207 - 125Relay Omron217 - 200Din rail, 7"217 - 170Rail end186 - 600Circuit breaker217 - 200Din rail, 5"217 - 170Rail endCOM115V 230V12VAC217 - 170Rail end 245 - 100TransformerC O MM1314151 61 78456783435363 73 83940217 - 170Rail endHH217 - 220Terminal, 10mm, grey217 - 120Terminal, 4mm, grey217 - 170Rail end185 - 100Capacitor, fan217 - 220Terminal, 10mm, grey217 - 170Din rail, 3"217 - 230Terminal ground© GBC Pro - Tech April 1999 Page 7 - 6

GBC Pro - Tech Parts ManualO II : Front & Rear Panels001 - 090 Front Control Panel219 - 150Speed guage214 - 280Switch, fwd/revX92 - 0096Panel465 - 300Knob, speed214 - 296Cover, black214 - 290Switch, auto/stop321220 - 160Potentiometer230 - 140Temp controls230 - 140Temp controls123411 126789123411 1267895 105 10214 - 295Cover, red214 - 295Cover, green214 - 270Switch, on/off321321214 - 270Switch, on/off340 - 113Guage, 0-100330 - 580Air fitting, 1/8 npt340 - 005Regulator214 - 296Cover, black214 - 270Switch, on/off321330 - 520Elbow, air214 - 400Knob, power465 - 300Knob, speed220 - 150Controller, fan1 3 52 4 6214 - 305Switch, on/off001 - 068 Rear Control Panel340 - 113Guage, 0-100340 - 005Regulator350 - 150Valve switch340 - 113Guage, 0-100330 - 580Air fitting, female330 - 580Air fitting, femaleX92 - 0097Panel330 - 520Elbow, male, 1/8 npt340 - 005Regulator214 - 296Cover, black214 - 280Switch, fwd/rev123330 - 730Elbow, male, 1/4 npt465 - 300Knob, fan214 - 296Cover, black214 - 290Switch, auto/stop123220 - 150Potentiometer, fan© GBC Pro - Tech April 1999 Page 7 - 7

GBC Pro - Tech Parts ManualO II : Drive Side001 - 007Idler, webbing001 - 091Frame001 - 047Main cylinder, drive001 - 002Rewind175 - 500Seal, hole001 - 051Main roll, upper001 - 053Main roll, lower750 - 001Sprocket, modified001 - 007Idler, webbing001 - 062Blower, drive001 - 097Motor001 - 002Rewind175 - 500Seal, hole001 - 055Pull roll, upper001 - 056Pull roll, lower001 - 102Idler sprockets001 - 058Pull roll cylinder, drive001 - 101Guard, blower hose001 - 002Rewind001 - 096Self tensioner400 - 120Chain© GBC Pro - Tech April 1999 Page 7 - 8

N© GBC Pro - Tech April 1999 Page 7 - 9621SECTIONA-ASCALE:FULL3 4A A-001SCALE: 1/25ASSEMBLYREQ'DDESCRIPTIONPART NO. ITEM1 BRKT,UNWIND,UPPER X92-0068 11 BRKT,UNWIND,BOTTOM X92-0069 22 WASHER, THRUST 040200 31 .75 X 2-1/2 SHOULDER BOLT - 47 3/8-16 X 1 LG SHCS - 51 SHAFT, UNWIND X92-0172 61 SADDLE, SHAFT POCKET X92-0128 71 PIN, PULL 086-100 8REVISIODIM. ASSHOWNX/XX.X.XX.XXX.XXX8This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISE SPECIFEDTOLERANCETOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:7DATE: DRAWN BY: DWG SCALE:1-24-94 P.R. C2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685UNWIND, 1-5/8 DIAORCAIIDwg:001-001GBC Pro - Tech Parts ManualO II : 001 - 001 Unwind ( CNO )

N© GBC Pro - Tech April 1999 Page 7 - 1018171924 15 14 131620A21 221223SECTIONA-ASCALE: 1/1119 101 2 3-002SCALE: 1/2ASSEMBLY8 7456AREQ'DREVISIODESCRIPTIONUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:4-7-93 RAS C22117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY,REWINDORCA II, IIIPART NO.1 PLUG, CLUTCH, ORCA I, II X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SNAP RING, 1" SHAFT 090-140 71 SPRING , 1" ID X 1-3/8 LG089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 111 PLUG, CLUTCH DRIVE X92-0111 121 WASHER, THRUST, .090 THK 032-420 131 WASHER, THRUST .030 THK 032-410 141 BEARING, THRUST 032-400 151 BUSHING, BOST-BRONZE 040-003 161 KEY, 1/4 X 1/4 X 5/8 LG - 171 BOLT, CLUTCH DRIVE, ORCA I, II 645-008 181 LOCK NUT, 5/8-11 HEX - 191 SPROCKET, 26 TOOTH 435-215 202 WASHER, THRUST, .090 THK 032-205 211 BEARING, THRUST 032-190 221 TUBE, CARDBOARD 860-000 231 WASHER, THRUST .030 THK 032-170 24Dwg:001-002ITEMGBC Pro - Tech Parts ManualO II : 001 - 002 Rewind ( CNO )

R© GBC Pro - Tech April 1999 Page 7 - 11DCBA4 3 2PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH42-7/64C69.00 REF1 2 3-005 ASSEMBLY1/1REQ'D4DESCRIPTIONREVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.5 61-24-94PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645IDLER, TENSION, FIXEDORCA III3 2 11PART NO.1 - 620-405 12 BEARING, IDLER 020-100 24 SET SCREW, 10-32 X 3/16 LG - 31 - 710-110 42 WASHER, LOCK, 3/8 - 52 - - 6DRAWN BY: SCALE: SIZE:P.R. 1:1 CDwg:ITEM001-005DCBAGBC Pro - Tech Parts ManualO II : 001 - 005 Idler, Fixed

© GBC Pro - Tech April 1999 Page 7 - 1253/64 REFREQ'D1 2 3-006SCALE: 1/1ASSEMBLYDESCRIPTIONREVISIONX/XX.X.XX.XXX.XXX4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:PART NO.1 IDLER, 2 X 64", CHROME 620-405 12 BEARING, IDLER 020-100 24 SETSCREW, 10-32 X 3/16" LG - 31 IDLER SHAFT 710-111 4Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:1-24-94 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685IDLER, PAPER INFEEDORCA IIIDwg:001-006ITEMGBC Pro - Tech Parts ManualO II : 001 - 006 Idler, Table

N© GBC Pro - Tech April 1999 Page 7 - 138-007SCALE: 1/2ASSEMBLY3 1110975 126UUPPER4REQ'D DESCRIPTIONPART NO. ITEM2 ROLLER, TENSION IDLER 620409 12 SHAFT, TENSION IDLER X92-0173 24 CYLINDER, TENSION IDLER 320130 34 BEARING, CAM FOLLOWER 028130 44 BEARING, IDLER TENSION 020130 58 RETAINING RING 090200 64 LOCK COLLAR 290190 74 DROP WASHER 560050 84 FLAT WASHER, 1/4" -- 94 AIR FITTING, 1/16 SWIVEL ELBOW 330820 103 AIR FITTING, ELBOW 1/8 NPT - 111 AIR FITTING, STRAIGHT 1/8 NPT - 12ULOWERREVISIOUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:1-21-94 P.R. C2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685IDLER, TENSION, UPPER & LOWERORCA IIDwg:12001-007GBC Pro - Tech Parts ManualO II : 001 - 007 Idler, Tensioning, Top / Bot ( CNO )

© GBC Pro - Tech April 1999 Page 7 - 14REQ'DREVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.0054This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP1DDESCRIPTIONTITLE:321DATE: DRAWN BY: DWG SCALE:5-6-93 RAS A1Pro-TechEngineering2117 N. Stoughton Rd. Madison, WisconsinPhone (608) 246-8844 53704 Fax (608) 246-4685SPROCKET, IDLER,ORCA 13TIIDwg:PART NO.1 SHAFT, IDLER 440110 11 THRUST BEARING 032120 22 THRUST WASHER 032145 31 SPROCKET, 13T 440125 41 THRUST WASHER 032130 55001-008ITEMGBC Pro - Tech Parts ManualO II : 001 - 008 Idler, Sprocket

© GBC Pro - Tech April 1999 Page 7 - 159671421163548111310121.406-047SCALE: 1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 CYLINDER, MAIN ROLL, RT 320-290 11 BRACKET, MTG, CYL, RT X92-0087 21 CLEVIS, MAIN ROLL 325-200 31 ADJUSTING ROD, 3/4-16, 1-3/8 LG 120-100 41 LOCK COLLAR 290-260 51 RETAINING RING 090-190 61 BALL PLUNGER 098-120 71 SHIM SPACER 068-100 81 SHIM DISK, MAIN CYL, RT X92-0032 92 VALVE, SPEED REDUCER 330-130 102 NUT, JAM, 1/2-20 - 112 FITTING, AIR, 90%%D ELBOW, 1/4 NPT 330-730 121 FITTING, AIR, 90%%D STREET ELBOW, 1/4 NPT 330-760 134 CAP SCREW, SOCKET, 1/4 - 20 X 1" LG - 142 CAP SCREW, SOCKET, 3/8-16 X 3/4 LG - 151 ADJUSTING ROD, 3/4-16, 2-3/4 LG 120-100 1615REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISE SPECIFEDTOLERANCEPro-Tech EngineeringDIM. AS2117 N. Stoughton Rd. Madison, Wisconsin 53704TOL.SHOWNFINISHPhone (608) 246-8844 Fax (608) 246-4685TO BEX/XTITLE:NCYLINDER, P 1/64MAIN ROLL,125X. P .050ORCA RTX.X P .020IIX.XX P .010 ANGLESDATE: DRAWN BY: DWG SCALE: Dwg:P 1D1-28-94 P.R. C2 001-047X.XXX P .005GBC Pro - Tech Parts ManualO II : 001 - 047 Main Cylinder, Drive

N© GBC Pro - Tech April 1999 Page 7 - 161310125481139671421-050SCALE: 1/21.406ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM151 CYLINDER, MAIN ROLL, LF 320-290 11 BRACKET, MTG, CYL, LF X92-0089 21 CLEVIS, MAIN ROLL 325-200 32 ADJUSTING ROD 120-100 41 LOCK COLLAR 290-260 51 RETAINING RING 090-190 61 BALL PLUNGER 098-120 71 SHIM SPACER 068-100 81 SHIM DISK, MAIN CYL, LF X92-0090 92 VALVE, SPEED REDUCER 330-130 102 NUT, JAM, 1/2-20 - 112 FITTING, AIR, STRAIGHT, 1/4 NPT 330-600 121 FITTING, AIR, 90%%D STREET ELBOW, 1/4 NPT 330-760 134 CAP SCREW, SOCKET, 1/4 - 20 X 1" LG - 142 CAP SCREW, SOCKET, 3/8 - 16 X 3/4 " LG - 15REVISIOUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685CYLINDER, MAIN ROLL, LFORCAIIDATE: DRAWN BY: DWG SCALE: Dwg:1-28-94 P.R. C2 001-050GBC Pro - Tech Parts ManualO II : 001 - 050 Main Cylinder, Control

N© GBC Pro - Tech April 1999 Page 7 - 17682791-051SCALE: 1/2ASSEMBLY3REQ'D DESCRIPTIONPART NO. ITEM4101 ROLL, MAIN, TOP X93-0114 14 BRACKET, ROLL SLIDE TRACK X92-0027 22 BEARING, JOURNAL, MAIN ROLL 026110 32 BRACKET, BRG SLIDE PLATE X92-0028 41 BRACKET, HEATER, DRIVE SIDE, TOP X92-0167 51 BRACKET, HEATER, CONTROL SIDE X93-0051 64 BOLT, HEX, 9/16-12 X 1-1/2 LG - 74 NUT, JAM, 9/16-12 - 812 CAP SCREW, SOCKET, 3/8-16 X 1 - 94 FITTING, GREASE - 105REVISIOUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-2-94 P.R. C2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685MAIN ROLL, TOPORCA IIDwg:001-051GBC Pro - Tech Parts ManualO II : 001 - 051 Main Roll, Upper ( CNO )

N© GBC Pro - Tech April 1999 Page 7 - 18864971 3-053SCALE: 1/2ASSEMBLY12102115REQ'D DESCRIPTIONPART NO. ITEM1 ROLL, MAIN, bottom X93-0114 11 SPROCKET, 48T 1-15/16 BORE 435225 22 BEARING, JOURNAL, MAIN ROLL 026110 31 PULLEY, BELT DRIVE, SPD CTRL, 680055 41 BRACKET, HEATER, DRIVE SIDE, BOTTOM X92-0166 51 BRACKET, HEATER, CONTROL SIDE X93-0051 64 BOLT, HEX, 9/16-12 X 1-1/2 LG - 72 NUT, JAM, 9/16-12 - 82 COUPLER, THREADED, 9/16-12 X 2-1/8 LG X92-0025 92 STANDOFF 755001 102 BOLT, HEX, 1/4 - 20 X 3" LG - 112 BOLT, HEX, 9/16 - 12 X 1" LG - 12REVISIOUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2-2-94 P.R. C22117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685MAIN ROLL, BOTTOMORCAIIDwg:001-053GBC Pro - Tech Parts ManualO II : 001 - 053 Main Roll, Lower ( CNO

© GBC Pro - Tech April 1999 Page 7 - 19DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHUNOTESU1. INTERPRET DRAWING PER ASME Y14.5-19944C4 3125 7-055SCALE: 1/23ASSEMBLY3A2REQ'DDESCRIPTIONPART NO. ITEM1 PULL ROLL, TOP X92-0075 11 SHAFT, PULL ROLL X92-0103 22 BEARING, PULL ROLL, 1-1/4 ID 020-150 32 LOCK COLLAR, SPLIT, 1-1/4 ID 290-560 42 SPRING, WAVE, 089-015 52 WASHER, THRUST, 1-1/4 ID 032-410 72.2690P.R3-14-97REVISIONASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005#REF!FINISHTO BE125ANGLESP 1DTITLE:#REF!#REF!1R PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: #REF! DRAWN BY: SCALE: SIZE:RELEASE#REF! #REF!NO.1#REF!Dwg:#REF!DCBAGBC Pro - Tech Parts ManualO II : 001 - 055 Pull Roll, Upper ( CNO )

N© GBC Pro - Tech April 1999 Page 7 - 20531-0564SCALE: 1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 PULL ROLL, BOTTOM X92-0078 11 CLUTCH, PNEUMATIC, 26T 375170 22 BEARING, PILLOW BLK, FLANGED 026100 34 CAP SCREW, SOCKET, 7/16 - 14 X 1" LG - 44 WASHER, LOCK, 7/16 - 51 NIPPLE, CLOSE, 1/8 NPT 330220 61 FITTING, AIR, FEM ELBOW, 1/8 NPT 330510 71 KEY, 1/4 X 1/4 STOCK - 87268REVISIOUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-4-94 P.R. C2Pro-Tech EngineeringPULL ROLL, BOTTOMORCA II2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685Dwg:001-056GBC Pro - Tech Parts ManualO II : 001 - 056 Pull Roll, Lower ( CNO )

N© GBC Pro - Tech April 1999 Page 7 - 21134103526119817-058SCALE: 1/2.875ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 CYL, PULL ROLL (BIMBA FO-174) 320-300 11 BRACKET, CYL MNT, RT 510-082 21 SHIM DISK, PULL ROLL, RT X92-0091 31 BRACKET, LIFT, PULL ROLL X92-0138 41 PLUNGER, BALL 098-120 52 FITTING, AIR, MALE 1/8 NPT 330-590 62 VALVE, AIR CONTROL, 1/8 NPT 330-120 74 CAP SCREW, SOCKET, 10-32 X 3/4 - 81 NUT, JAM, 3/8-24 - 92 LOCK COLLAR, 3/8-24 290-190 101 BOLT, SHOULDER, 1/4 X 3/8 - 112 CAP SCREW, SOCKET, 3/8-16 X 3/4 - 121 JAM NUT, 1/4-20 - 1312RL1-2- MREVISIO962502AUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-8-94 P.R. C2Pro-Tech Engineering4151 Anderson Road, Madison, WI 53532Phone (608) 246-8844 Fax (608) 246-8645CYLINDER, PULL ROLL, RT.ORCA IIDwg:001-058GBC Pro - Tech Parts ManualO II : 001 - 058 Pull Cylinder, Drive

N© GBC Pro - Tech April 1999 Page 7 - 22154-O599637 1182SCALE-1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 CYL, PULL ROLL, (BIMBA FO-174) 320-300 11 BRACKET, CYL MNT, LF 510-079 21 SHIM DISK, PULL ROLL, LF X92-0092 32 VALVE, AIR CONTROL, 1/8 NPT 330-120 42 FITTING, AIR, MALE 1/8 NPT 330-590 51 ASSEMBLY, SHAFT, CYLINDER, PULL ROLL 001-304 61 PLUNGER, BALL 098-120 78 CAP SCREW, SOCKET, 10-32 X 3/4 - 81 BOLT, SHOULDER, 1/4 X 3/8 - 92 CAP SCREW, SOCKET, 3/8-16 X 3/4 - 101 JAM NUT, 1/4-20 - 1110REVISIOUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-9-94 P.R. C2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685CYLINDER, PULL ROLL, LFORCA IIDwg:001-059GBC Pro - Tech Parts ManualO II : 001 - 059 Pull Cylinder, Control

© GBC Pro - Tech April 1999 Page 7 - 23NOTES:131521TWO HOLES ARE PROVIDED FOR MOUNTING BRACKET (X93-0045)TO FAN SHROUD (X93-0023). USE LOWER HOLE LOCATION FORASSEMBLY -061 ONLY.14164513-061SCALE: 1/461ASSEMBLY1011127 8 9REQ'DDESCRIPTIONREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISTO HBE125ANGLESP1DTITLE:Pro-Tech EngineeringBLOWER, LFORCA IIPART NO.1 INLET RING 182300 11 SHROUD, AIR X93-0023 21 BOX, AIR X93-0024 31 HOSE, FLEX AIR, 4" 180500 41 FAN, REVERSE IMPELLER 182200 52 BRACKET, AIR SHROUD X93-0045 64 SPACER, FAN 120510 74 WASHER, FLAT, 1/4 - 84 CAP SCREW, SOCKET, M4 X 40 050400 94 NUT, JAM, 10-32 - 104 STUD, 10 - 32 X 6" LG - 11A/R GASKET, TRIM LOCK 484200 122 CAP SCREW, SOCKET, 10-32 X 3/4 LG - 138 RIVET, POP, 1/4 - 144 NUT, LOCK, 10-32 - 152 CLAMP, HOSE, 4 - 1/2 " LG 100130 162117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ITEMDATEDRAWNDWG Dwg:BY:SCALE::2-10-94 P.R. C4 001-061GBC Pro - Tech Parts ManualO II : 001 - 061 Blower, Control ( CNO )

© GBC Pro - Tech April 1999 Page 7 - 24NOTES:211TWO HOLES ARE PROVIDED FOR MOUNTING BRACKET (X93-0045)TO FAN SHROUD (X93-0023). USE UPPER HOLE LOCATION FORASSEMBLY -062 ONLY.143154513-062SCALE: 1/46161ASSEMBLY1011127 8 9REQ'DDESCRIPTIONREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:BLOWER, RTORCA IIPART NO.1 INLET RING 182300 11 SHROUD, AIR X93-0023 21 BOX, AIR X93-0024 31 HOSE, FLEX AIR, 4" 180500 41 FAN, REVERSE IMPELLER 182200 52 BRACKET, AIR SHROUD X93-0045 64 SPACER, FAN 120510 74 WASHER, FLAT, 1/4 - 84 CAP SCREW, SOCKET, M4 X 40 050400 94 NUT, JAM, 10-32 - 104 STUD, 10 - 32 X 6" - 11A/R GASKET, TRIM LOCK 484200 122 CAP SCREW, SOCKET, 10-32 X 3/4 LG - 138 RIVET, POP, 1/4 - 144 NUT, LOCK, 10-32 - 152 CLAMP, HOSE, 4-1/2" 100130 16Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ITEMDATE: DRAWN BY: DWG SCALE:2-10-94 P.R. C4 001-062Dwg:GBC Pro - Tech Parts ManualO II : 001 - 062 Blower, Drive ( CNO )

N© GBC Pro - Tech April 1999 Page 7 - 2556 8 7 94REQ'D DESCRIPTIONPART NO. ITEM1 ROTO PULSER 219140 11 PULLEY, 32T 430100 21 BRACKET, ENCODER MTG 510015 31 BELT, TIMING 400105 41 CABLE, CONNECTING 219130 52 CAP SCREWS, SOCKET, 6-32 X 1/4 LG - 62 CAP SCREWS, SOCKET, 14-20 X 1/2 LG - 76 WASHER, FLAT, #6 - 82 WASHER, FLAT, 1/4 - 93-063SCALE: 1/1ASSEMBLY1REVISIO2Pro-Tech EngineeringThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDE2117 N. Stoughton Rd. Madison, WisconsinDIM.TOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H4685X/TITLEBEP 1/64X: ENCODER, SPEEDX125P .050.CTRLORCA IIX.P .020XDATEDRAWNDWG DwgX.XANGLEP .010:BY:SCALE::XSP 2-14-CX.XX1DP.R.P .005X941001-063GBC Pro - Tech Parts ManualO II : 001 - 063 Encoder, Speed Control

N© GBC Pro - Tech April 1999 Page 7 - 26514-0653SCALE: 1/1ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 REGULATOR, AIR 340120 11 BRACKET, MTG, REGULATOR 510000 21 FITTING, AIR, 1/16 TEE 330830 31 FITTING, AIR, BUSHING, 1/4 X 1/8 330610 41 FITTING, AIR, ELBOW, MALE 330730 52 CAP SCREW, BUTTON, 1/4-20 X 1/2 - 662REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDEDIM.2117 N. Stoughton Rd. Madison, WisconsinTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H4685X/TITLEBEP 1/64X:X125 REGULATOR, AIRP .050.ORCA IIX.P .020XX.XANGLEDATEDRAWNDWG DwgP .010X:BY:SCALE::SP 2-15-CX.XX1DP .005P.R.X941Pro-Tech Engineering001-065GBC Pro - Tech Parts ManualO II : 001 - 065 Regulator, Main Air

© GBC Pro - Tech April 1999 Page 7 - 2745EB P EABA61-066SCALE: 1/12ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 VALVE, AIR, SOLENOID 350100 13 FITTING, AIR, RUN TEE, MALE 330290 23 FITTING, AIR, ELBOW, MALE (SMC) 330300 31 MUFFLER, AIR 330280 41 FITTING, AIR, ELBOW, MALE 1/4 NPT 330730 52 CAP SCREWS, SOCKET, 1/4-20 X 1-1/4 LG - 63REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM.SHOW ASNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTOBE125ANGLESP1DTITLE:DATEDRAWN BY: DWG SCALE::2-15-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685VALVE, AIR, SOLENOIDORCA IIDwg:001-066GBC Pro - Tech Parts ManualO II : 001 - 066 Air Solenoid Valve

N© GBC Pro - Tech April 1999 Page 7 - 28254 8 96-069SCALE: 1/110ASSEMBLY73REQ'D DESCRIPTIONPART NO. ITEM1 CABLE, SAFETY X93-0011 11 BRACKET, MTG, MICRO-SWITCH X92-0114 21 SPRING 089-140 31 MICRO-SWITCH 214-330 41 WASHER, FLAT - 51 NUT, JAM, 5/16-18 - 61 NUT, HEX, 5/16-18 - 72 CAP SCREW, BUTTON, 10-32 X 3/4 LG - 82 CAP SCREW, SOCKET, 4-40 X 3/4 - 92 LOCKNUT, 4-40 - 101REVISIOThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM.SHOW ASNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISTO HBE125ANGLESP1DTITLE:Pro-Tech EngineeringCABLE, SAFETYORCA II2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685DATEDwgDRAWN BY: DWG SCALE:::2-18-94 P.R. C1 001-069GBC Pro - Tech Parts ManualO II : 001 - 069 Cable Safety ( CNO )

GBC Pro - Tech Parts ManualO II : 001 - 070 Infrared Sensor ( CNO )This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence..:Pro-Tech EngineeringNX/XORCA IIX.X.XUNLESS OTHERWISE SPECIFEDTOLERANCEDIM.SHOW ASX.XX.XXXXTOL:P 1/64P .050P .020P .010P .005:FINISTO HBE125ANGLES P1DTITLE2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685SENSOR, INFRAREDREVISION321REQ'D DESCRIPTIONPART NO. ITEM1 SENSOR, INFRARED 230150 11 BRACKET, MTG, SENSOR X93-0018 22 CAP SCREW, BUTTON, 1/4-20 X 1/2 LG - 3-070SCALE: 1/1DATEDwgDRAWN BY: DWG SCALE:2-21-94 P.R. C1 001-070ASSEMBLY© GBC Pro - Tech April 1999 Page 7 - 29

© GBC Pro - Tech April 1999 Page 7 - 30REQ'D DESCRIPTIONPART NO. ITEM1 COVER, IR ELECTRONICS X93-0117 12 PANEL, MTG, IR ELECTRONICS X93-0050 28 STANDOFF, NYLON, .14 ID X .25 OD X .63 LG - 38 NUT, NYLON, 6-32 - 42 BOARD, IR ELECTRONICS 230150 54 STUD, 6-32 X 2-1/2 LG - 64 NUT, NYLON, 6-32 - 7-071SCALE: 1/1ASSEMBLY17REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:23465Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685PANEL, IR SENSORORCA IIDATE: DRAWN BY: DWG SCALE: Dwg:2-22-94 P.R. C1 001-071GBC Pro - Tech Parts ManualO II : 001 - 071 Boards, I.R. Sensors ( CNO )

R© GBC Pro - Tech April 1999 Page 7 - 31DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4.004C(68.43)43354.00B2.50REQ'D2XC.312C.531 X 82D C'SINK22DESCRIPTION(5.16)32959MSU2X SCALE9-29-97B2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .00541SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCETOL.FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.2-23-941PART NO.1 TABLE, SMALL,GREY 760-048 11 EXTRUSION, ALUM 110-110 22 T-NUT 050-001 31 SCREW,SET,1/4-20 X 1.0 050-020 42 FHCS, 1/4-20 X 1 LG - 5PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,TABLE,SMALLORCA II,IIIDRAWN BY: SCALE: SIZE:P.R. 1:2 CDwg:ITEM001-083DCBAGBC Pro - Tech Parts ManualO II : 001 - 083 Table, Small

R© GBC Pro - Tech April 1999 Page 7 - 32DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4.004C(68.43)3354.0061.38B4.37A2REQ'DDESCRIPTIONPART NO. ITEM1 TABLE, LARGE 760-049 11 EXTRUSION, ALUM 110-110 21 EXTRUSION, ALUM 110-100 34 T-NUT 050-001 41 SCREW,SET,1/4-20 X 1.0 050-020 54 FHCS, 1/4-20 X 1 LG - 64X C.312C.531 X 82D C'SINK2(8.75)3KL429550867MS9-29-972-9-95BAU2X SCALE2 1REVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.52-23-941PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,TABLE,LARGEORCA II,IIIDRAWN BY: SCALE: SIZE:P.R. 1:1 CDwg:001-084DCBAGBC Pro - Tech Parts ManualO II : 001 - 084 Table, Large

© GBC Pro - Tech April 1999 Page 7 - 33354REQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, FRONT, RT 510-056 11 KNOB, LOCK-DOWN, TABLE 465-200 21 BUMPER, RUBBER 465-500 34 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 - 41 NUT, 1/4-20 - 5-0851 2SCALE: 1/1ASSEMBLYREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-23-94 P.R. C1Pro-TechEngineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, FRONT, RTORCA II, ORCA IIIDwg:001-085GBC Pro - Tech Parts ManualO II : 001 - 085 Bracket, Front Table, Drive

© GBC Pro - Tech April 1999 Page 7 - 34REQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, FRONT, LF 510-055 11 KNOB, LOCK-DOWN, TABLE 465-200 21 BUMPER, RUBBER 465-500 34 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 - 41 NUT, 1/4-20 - 5-086SCALE: 1/2ASSEMBLY2 4 1 3 5REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2-23-94 P.R. C22117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, FRONT, LFORCA II, ORCA IIIDwg:001-086GBC Pro - Tech Parts ManualO II : 001 - 086 Bracket, Front Table, Control

© GBC Pro - Tech April 1999 Page 7 - 3562-087SCALE: 1/1REQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, REAR, RT 510-067 11 SUPPORT, BRACKET X92-0125 21 KNOB, LOCK-DOWN, TABLE 465-200 31 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 - 41 BOLT, SHOULDER, 1/4 X 3/8 - 51 WASHER, FLAT, 1/4 - 6ASSEMBLY513REVISION4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-24-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, REAR, RTORCA IIIDwg:001-087GBC Pro - Tech Parts ManualO II : 001 - 087 Bracket, Rear Table, Drive

© GBC Pro - Tech April 1999 Page 7 - 363 1 54REQ'D DESCRIPTIONPART NO. ITEM-0881 BRACKET, TABLE, REAR, LF 510-069 11 SUPPORT, BRACKET X92-0125 21 KNOB, LOCK-DOWN, TABLE 465-200 31 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 LG - 41 BOLT, SHOULDER, 1/4 X 3/8 - 51 WASHER, FLAT, 1/4 - 6SCALE: 1/1ASSEMBLY2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0056This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-24-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, REAR, LFORCA IIIDwg:001-088GBC Pro - Tech Parts ManualO II : 001 - 088 Bracket, Rear Table, Control

© GBC Pro - Tech April 1999 Page 7 - 37REQ'D DESCRIPTIONPART NO. ITEM1 PHOTO EYE 250-100 11 BRACKET, PHOTO EYE 510-334 21 CAP SCREW, BUTTON, 1/4-20 X 3/8 LG - 31 WASHER, SERRATED, 1/4 - 4-089341SCALE: 1/1ASSEMBLY2REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCE2117 N. Stoughton Rd. Madison, WisconsinDIM. AS TOLPhone (608) 246-8844 53704 Fax (608) 246-SHOWN . FINISH4685X/TO BE TITLEP 1/64X:X125 PHOTO EYEP .050.X.ORCA IIP .020XX.XDATEDWG DwgP .010 ANGLESDRAWN BY:X:SCALE::P 1DX.XXP .0052-22-94 P.R. C1XPro-Tech Engineering001-089GBC Pro - Tech Parts ManualO II : 001 - 089 Photo Eye ( CNO )

© GBC Pro - Tech April 1999 Page 7 - 388711013691112-091SCALE: 1/8ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM2 SIDE FRAME X92-0100 12 TIE BAR, 2" X 69" 770-395 22 TIE BAR, 2-3/8" X 69" 770-400 34 WHEEL, CASTER, STEEL 470-120 42 FOOT, LF-RR, RT-FR X93-0003 52 FOOT, LF-FR, RT-RR X93-0004 6A/R TRIM 450-020 74 COLLAR, LOCK, 1-1/2 I.D. 290-640 82 CONDUIT 540-401 916 CAP SCREW, SOCKET, 3/8-16 X 1 LG - 1016 CAP SCREW, SOCKET, 5/16-18 X 3/4 LG - 1116 WASHER, FLAT, 5/16 - 128 WASHER, LOCK - 134235REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-28-94 P.R. C8Pro-Tech EngineeringFRAMEORCA II2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685Dwg:001-091GBC Pro - Tech Parts ManualO II : 001 - 091 Frame ( CNO )

© GBC Pro - Tech April 1999 Page 7 - 39351-0964SCALE: 1/1REQ'D DESCRIPTIONPART NO. ITEMASSEMBLY1 TENSIONER, CHAIN 440-150 11 SPROCKET, 19T 440-130 21 STANDOFF, 1/2 ID X 1-3/4 755-000 31 BOLT, CHAIN TENSIONER X93-0047 41 NUT, NYLOCK, 1/2-13 - 52REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:3-3-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645TENSIONER, CHAINORCA II, ORCA IIIDwg:001-096GBC Pro - Tech Parts ManualO II : 001 - 096 Self tensioning Idler

© GBC Pro - Tech April 1999 Page 7 - 403REQ'D DESCRIPTIONPART NO. ITEM1 MOTOR 425 - 003 11 SPROCKET, 20T 435-255 21 KEY, 3/16 X 3/16 STOCK - 34 CAP SCREW, SOCKET, 1/4-28 X 1 LG - 424-097SCALE: 1/2ASSEMBLY1REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:MOTORORCA IIDATE: DRAWN BY: DWG SCALE:3-4-94 P.R. C2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685Dwg:001-097GBC Pro - Tech Parts ManualO II : 001 - 097 Motor ( CNO )

© GBC Pro - Tech April 1999 Page 7 - 41REQ'D DESCRIPTIONPART NO. ITEM1 GAUGE, PRESSURE, 0-60 PSI 340-112 11 FITTING, AIR, REDUCER, 1/4 X 1/8 330-610 21 FITTING, AIR, SWIVEL, 1/16 330-810 312-099SCALE: 1/13ASSEMBLYREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. AS TOLSHOWN . FINISHX/TO BEP 1/64XX125P .050.X.P .020XX.XP .010 ANGLESXP 1DX.XXP .005XTITLE:DATE: DRAWN BY: DWG SCALE:3-4-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685GAUGE, PRESS, TENSION IDLERORCA IIDwg:001-099GBC Pro - Tech Parts ManualO II : 001 - 099 Guage, Web Tensioner

© GBC Pro - Tech April 1999 Page 7 - 424-100SCALE: 1/1ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 COLLAR, BRAKE 515-050 11 COLLAR, ADJUST 515-051 21 COLLAR, LOCK, BRAKE 515-053 31 O-RING, 2-7/8 480-010 41 SET SCREW, 1/4-20 HALF DOG PT - 51 CAP SCREW, SOCKET, 3/8-24 X 1-1/4 - 61 SPRING, WAVE 089-120 71 2 3 567REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:3-7-94 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645BRAKE, UNWINDORCA II, ORCA IIIDwg:001-100GBC Pro - Tech Parts ManualO II : 001 - 100 Unwind Core Brake

© GBC Pro - Tech April 1999 Page 7 - 43432-101SCALE: 1/1ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 GUARD, BLOWER HOSE X93-0326 11 NUT, JAM, NYLOCK - 21 STUD, 1/4 - 20 X 2" LG - 32 NUT, JAM, 1/4-20 - 4REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP1DTITLE:1DATE: DRAWN BY: DWG SCALE:3-11-94 P.R. A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685GUARD, BLOWER HOSEORCA IIDwg:001-101GBC Pro - Tech Parts ManualO II : 001 - 101 Guard, Blower Hose

© GBC Pro - Tech April 1999 Page 7 - 4434 5 26(7)REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT, IDLER 440-110 11 SPROCKET, 13T 440-125 21 BOLT, MOD., 3/4-16 X 1 505-002 31 NUT, JAM, 3/4-16 - 41 WASHER, THRUST 032-291 51 WASHER, STAR, INT. TOOTH, 3/4 068-002 62 WASHER, THRUST 032-130 77REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE1251ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:5-6-93 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY, SPROCKET, IDLER, ADJUSTABLEORCA IIIDwg:001-102GBC Pro - Tech Parts ManualO II : 001 - 102 Adjustable Chain Tensioner, Primary

© GBC Pro - Tech April 1999 Page 7 - 45-103SCALE: 1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 FILTER-LUBER-GAUGE, AIR 340-240 11 FITTING, AIR, STREET ELBOW, 1/4 330-760 21 COUPLER, AIR, Q/C, MALE 330-260 31 FITTING, AIR, MALE ELBOW, 4 X 4 330-730 42 CAP SCREW, SOCKET, 10-24 X 1/2 - 52 135REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685FILTER-LUBER, AIRORCA IIDATE: DRAWN BY: DWG SCALE:3-11-94 P.R. A2Dwg:4001-103GBC Pro - Tech Parts ManualO II : 001 - 103 Filter / Luber

© GBC Pro - Tech April 1999 Page 7 - 46REQ'D DESCRIPTIONPART NO. ITEM1 SWITCH, AIR 350-500 11 VALVE, AIR, 1/4 X 1/8 NPT 330-110 21 FITTING, AIR, BRANCH TEE 4 X 2 330-630 31-1082SCALE: 1/13ASSEMBLYREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOLERANCETOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP1DTITLE:DWGDATE:DRAWN BY:SCALE:3-16-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685SWITCH, AIR, WEBORCA IIDwg:001-108GBC Pro - Tech Parts ManualO II : 001 - 108 Switch, Web Idlers

© GBC Pro - Tech April 1999 Page 7 - 4743REQ'D DESCRIPTIONPART NO. ITEM2 ASSY, BLADE, SLITTER 001-109 11 SHAFT, SLITTER X93-0032 21 STANDOFF, HINGE COLLAR 755-550 31 CAP SCREW, SOCKET, 1/2-13 X 1-1/4 - 41 NUT, HEAVY, 1/2-13 - 51 BOLT, HEX, 1/2-13 X 3/4 - 62 15-110SCALE: 1/1ASSEMBLYREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. AS TOL2117 N. Stoughton Rd. Madison, Wisconsin 53704SHOWN . FINISHPhone (608) 246-8844 Fax (608) 246-8645TO BEX/TITLEP 1/64X:X125 SLITTER, OUTFEEDP .050.X.ORCA IIP .020XDwgX.XP .010 ANGLES DATE: DRAWN BY: DWG SCALE::XP 1DX.XXP .0053-22-94 P.R. C1XPro-Tech Engineering6001-110GBC Pro - Tech Parts ManualO II : 001 - 110 Outfeed Slitters

© GBC Pro - Tech April 1999 Page 7 - 4832-114REQ'D DESCRIPTIONPART NO. ITEMSCALE: 1/11 COLLAR, LOCK, CORE END 640-020 11 O-RING, 2-7/8 480-005 21 CAP SCREW, SOCKET, 3/8-24 X 1-1/4 - 3ASSEMBLY1K.L.8-10-95 REVISION1077AThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:4-14-94 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645COLLAR, CORE END, UNWINDORCA IIIDwg:001-114GBC Pro - Tech Parts ManualO II : 001 - 114 Unwind Core End

© GBC Pro - Tech April 1999 Page 7 - 49FG3218451ENOTE:REPLACE SUPPLIED BOLTSWITH ITEM 20TIGHTEN -11- ONTO -15- UNTIL ALL OF -9- ISPILOTED ON -14-. THE -13- AND -14- MUSTROTATE FREELY TOGETHER ON -15-.BLUE LOCTITE -11- TO -15-.1776119128EAJH2/15/99 3270AJH12/16/97 3006MS10-29-96 2591RAS9-20-95 1122J.S.6-13-95 1013P.R.9-21-94 0667P.R.5-17-94 0442REVISIONG19GGFGREQ'D DESCRIPTIONPART NO. ITEM1 ARM, SLITTER 740-006 11 COLLAR, INFEED SLITTER 740-052 21 SCREW, THUMB 505-010 31 SPRING, TENSION 089-150 41 ROLL PIN, 1/8 X 1/2 LG 095-100 51 DOWEL PIN, 3/16 X 1/2 LG 095-140 61 ROLL PIN, 3/32 X 5/8 LG 095-120 72 WASHER, CONCAVE 740-007 81 BEARING, THRUST, 5/16 X 5/8 032-003 9- - - 101 NUT, NYLOCK, 8-32 - 112 WASHER, THRUST, 5/16 X 5/8 032-004 121 BLADE, SLITTER, CIRCULAR 475-001 131 FLANGED BUSHING, STEEL 040-037 141 STRIP, 3/16 X 3/4 050-032 151 WASHER, THRUST, 3/16 X 1/2 032-005 161 LABEL, WARNING 450-012 171 RIVET, FLTHEAD, 1/8 X 1/4 X 1/4 LG - 182 O-RING 480-030 192 SHCS,STAINLESS STEEL 5/16-24 X 3/4 - 2013FEDCBA14GREASE I.D. WITHBEARING GREASELIKE DOW 44.This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDEDIM.2117 N. Stoughton Rd. Madison, WisconsinTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/TITLEP 1/BEX 64:12X PSLITTER, INPUT5. .050X. PO2, O3, O1SPX .020X.X P ANGLEDATEDRAWNDWG DwgX .010:BY:SCALE::SPX.XX P1D 05-16-94 P.R. C1X .0051615Pro-Tech EngineeringF001-122GBC Pro - Tech Parts ManualO II : 001 - 122 Slitters, Infeed / Outfeed

© GBC Pro - Tech April 1999 Page 7 - 50DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4PROPRIETARYC33REQ'D-1231/1ASSEMBLY2DESCRIPTION1 22REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:PART NO.2 BEARING, IDLER 020-100 11 TUBE, SLITTER, PVC 490-288 21 IDLER, 2 X 64", CHROME 620-405 3Pro-Tech EngineeringIDLER, SLITTERORCA II, ORCA IIIDATE: DRAWN BY: DWG SCALE:5-23-94 P.R. B132117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:11001-123ITEMDCBAGBC Pro - Tech Parts ManualO II : 001 - 123 Idler, Slitter

© GBC Pro - Tech April 1999 Page 7 - 51REQ'D DESCRIPTIONPART NO. ITEM2 BEARING, IDLER 020-100 11 IDLER, 2 X 64", CHROME 620-405 2REVISIONUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1D2 1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.TITLE:DATE: DRAWN BY: DWG SCALE:Pro-Tech EngineeringASSY,IDLERORCA II, ORCA III1-10-95 K.L. A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:001-226GBC Pro - Tech Parts ManualO II : 001 - 226 Idler, Removable

GBC Pro - Tech Parts ManualOrca III SAEIllustrated Parts Diagrams( 000 - 012 )Available Options ;001 - 132 ( Vacuum table )001 - 084 ( Outfeed table )© GBC Pro - Tech April 1999 Page 8 - 1

© GBC Pro - Tech April 1999 Page 8 - 2450 - 136Decal, safety instructionDrive Side520 - 301Cabinet, right450 - 032Red stripe214 - 313Push button, E-Stop450 - 100Decal, logoORCA IIIBY PRO TECH214 - 314Contact block, E-Stop450 - 110Decal, E - Stop001 - 121Assembly, rear control panel450 - 133Decal, pinch, left483 - 000Filter media450 - 131Decal, danger voltage001 - 231Assembly, wire duct001 - 115Assembly, electrical panel001 - 225Assembly, noise filter185 - 003Filter, 120 / 25214 - 263Foot switch185 - 002Filter, 250 VACControl Side450 - 134Decal, pinch, right450 - 135Decal, read manual450 - 006Decal, fuses175 - 180Strain Relief, 1/2"450 - 035( Hazard Decal )450 - 007Decal, electrical diagram001 - 117Assembly, front control panel186 - 200Fuses, 3 amp520 - 300Cabinet, controlORCA IIIBY PRO TECH465 - 015Guard handle186 - 007Circuit breaker186 - 000Fuse holder186 - 002Fuse Carrier*001 - 170Accessory pack450 - 131Decal, danger voltage450 - 180Decal, hazardFor all the safetylabels, use part number001 - 259GBC Pro - Tech Parts ManualO III : Cabinets

© GBC Pro - Tech April 1999 Page 8 - 3086 - 100Clevis pin755 - 031Stand off730 - 035Side frame001 - 166Stopper, shield, left001 - 086Bracket, table, left180 - 500Air hose615 - 002Fan shroud700 - 002Saddle, right510 - 059Bracket, upper510 - 060Bracket, lowerX93 - 0006Foot bolt001 - 164Assembly, shield720 - 022Shaft, unwind690 - 051Main roll490 - 288Tube, slitter001 - 114Unwind core end510 - 071Bracket, castor, left, front001 - 100Unwind brake end530 - 012Core support001 - 084Table, large001 - 083Table, small510 - 105Bracket, castor, right, front001 - 006Idler, table050 - 022Set screw, brass tip001 - 226Idler, removable470 - 120Castor wheel730 - 035Side frame, drive465 - 430Thumb screw625 - 030Brake, delron001 - 165Stopper, shield, right500 - 051Bearing, take - up001 - 085Table bracket, right026 - 110Bearing, flanged001 - 005Idler, fixed700 - 001Saddle, right770 - 400Tie bar, grayGBC Pro - Tech Parts ManualO III : Front View

© GBC Pro - Tech April 1999 Page 8 - 4645 - 009Bolt089 - 140Spring001 - 326Assembly, rewind drive615 - 003Air box780 - 004Reflective tape100 - 130Clamp, hose001 - 087Bracket, rear table, right465 - 200Knob, lock down182 - 300( Inlet Ring )001 - 122Assembly, slitter510 - 071Bracket, castor, right, rear755 - 032Standoff095 - 135StandoffRemovable Idler Standoff / Modified425 - 003Motor, Bison690 - 015Pull roll, upperX93 - 0011Cable, kick, E-Stop770 - 395Tie bar, chrome860 - 000Rewind tube540 - 401Conduit690 - 012Pull roll, lower001 - 005Idler, Permanent100 - 220Bracket, air filter645 - 009Bolt089 - 140Spring001 - 181Assembly, rewind brake001 - 160Serial plate026 - 100Bearing, flanged001 - 088Bracket, rear table, left001 - 123Idler, slitter475 - 900Tape dispenser510 - 105Bracket, castor, left, rearX92 - 0083Cooling, tube755 - 033StandoffRemovable Idler StandoffsGBC Pro - Tech Parts ManualO III : Rear View

GBC Pro - Tech Parts ManualO III : Control Side - Components185 - 005Rectifier210 - 000Contactor230 - 006Infrared sensor230 - 004160 thermostat001 - 285Assembly, over temp189 - 028Heater, Maytag510 - 334Bracket, photo - eye rear 194 - 002Indicator, red250 - 000Photo - eye250 - 000Photo - eye502 - 000Strain relief230 - 006Infrared sensor001 - 168Vacuum table plug182 - 200Cooling fan230 - 000140 thermostat214 - 132Terminal block214 - 330Micro switch214 - 330Micro switch© GBC Pro - Tech April 1999 Page 8 - 5

GBC Pro - Tech Parts ManualO III : Control Side - Hardware550 - 300Bracket, main cylinder320 - 310Main cylinder545 - 330Cover, cylinder484 - 100Brush seal640 - 000Clamp, modified710 - 035Shaft, upper pull roll001 - 304Shaft, pull roll liftX92 - 0092Shim disk, control side510 - 079Bracket,cylinder mount320 - 300Pull cylinder001 - 059Assembly, pull roll cylinder510 - 101Bracket, infrared sensor585 - 002Shim guard290 - 360Lock collar450 - 025Decal, nip330 - 130Air rate control valve510 - 157Bracket, contact block560 - 075Top hat, chrome290 - 260Lock collar510 - 100Bracket, photo - eye, front510 - 078Bracket, thermostat510 - 149Bracket, overtemp switch510 - 164Bracket, heater, control side340 - 113Pressure guage510 - 000Bracket, regulator330 - 280Air muffler350 - 115Solenoid valve340 - 150Air regulator510 - 116Bracket, kick switch© GBC Pro - Tech April 1999 Page 8 - 6

P3P2P1L1L2A+A-GBC Pro - Tech Parts ManualO III : 001 - 115 Electrical Panel175 - 004Tie base207 - 007Relay base207 - 00624 vdc relay610 - 100Heat sink207 - 005Solid state relay, 90amp585 - 011670 - 004 Guard, MCBPanel 220 - 130HP resistor182 - 000Fan182 - 012Guard, fan510 -265Bracket, fan001 - 233Din rail set585 - 010Guard, power supply+ -220 - 160Motor controller board4 OIUNTP PU U3 TT43O 1IUN TP PU UT 2 T220 - 110Barrier board12I1 F+ F-217 - 140Ground terminal, 4mm217 - 270Terminal, blue, 4mm585 - 012Guard, fuse186 - 135Fuse, 20A001 - 342M.O.V.217 - 240Jumper bar, 4mm217 - 120Terminal, grey, 4mm217 - 250Cover, jumper bar, 4mm217 - 220Terminal block, 10mm100 - 015Bracket, capacitor217 - 170Rail end217 - 245Jumper bar, 10mm120 - 002Spacer, threaded, hex245 - 200Power supply450 - 035Decal, warning185 - 001Capacitor217 - 215Cover, terminal, 10mm217 - 255Cover, jumper bar, 10mm© GBC Pro - Tech April 1999 Page 8 - 7

SPSPGBC Pro - Tech Parts Manual001 - 117 Front Control PanelO III : Front & Rear PanelsPRO TECH ENGINEERING DEFOREST WI. U.S.A. (608) 246 - 8844219 - 000Digital displayR 0.0001 - 117PanelSELRST465 - 300Speed knobFWDAUTO214 - 290Switch, auto/stop220 - 161PotentiometerSPEEDREVSTOP214 - 280Switch, fwd/revSyrelecMOTOR CONTROLSCTD43SyrelecCTD43214 - 296Cover, black230 - 001Syrelec controllerALMOUTLOW75HIGHFSTALMOUTLOW75HIGHFSTSTFSTFTOPBOTTOM214 - 295Cover, green/redHEAT214 - 270Switch, on/off340 - 113Pressure guagePRESSURE50406030702080ADJ10090100ROLL340 - 005Air regulatorP.S.I.214 - 270Switch, on/offLAMINATOR ROLL CONTROLSMAIN POWERFAN TABLE194 - 000Indicator, green214 - 270Switch, on/off001 - 121 Rear Control PanelPRESSURE340 - 113Pressure guage4030201005060708090100001 - 121PanelADJP.S.I.340 - 005Air regulator350 - 150Switch, on/offPULL ROLL CLUTCHPRESSURE340 - 113Pressure guageADJ50403020100P.S.I.60708 80090100ROLL214 - 270Switch, up/down340 - 005Air regulatorPULL ROLL CONTROLS214 - 296Cover, blackCOOLING FANSAUTO001 - 189Switch, on/off214 - 290Switch, auto/stopSTOP© GBC Pro - Tech April 1999 Page 8 - 8

GBC Pro - Tech Parts ManualO III : Drive Side510 - 165Bracket, heater, top, drive400 - 153Chain, secondary585 - 004Guard, main roll sprocket005 - 036Heater tensioning kit001 - 242Assembly, adjustable tensioner435 - 003Sprocket, main roll040 - 020Tapered bushing510 - 166Bracket, heater, bottom, drive755 - 001Spacer, heater bracket585 - 007Guard, blower hose214 - 134Terminal block - 5001 - 102Assembly, adjustable tensioner730 - 035Side frame435 - 175Sprocket, rewind drive400 - 154Chain, primary, inner450 - 132Decal, moving parts290 - 190Lock collar375 - 170clutchX92 - 0138Shaft, pull roll lift510 - 082Bracket, cylinder mount001 - 058Assembly, pull roll cylinder440 - 125Sprocket, idler440 - 110SO 1 shaft001 - 096Assembly, chain tensioner501 - 085Bracket, proximity435 - 255Sprocket, motor219 - 001Indicator, proximity© GBC Pro - Tech April 1999 Page 8 - 9

R© GBC Pro - Tech April 1999 Page 8 - 10DCBA4 3 21PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC4 SET SCREW, 10-32 X 3/16 LG - 31 SHAFT, PERMANENT IDLER, 5/8 X 69" 710-110 42 WASHER, LOCK, 3/8 - 52 SHCS, 3/8 - 16 X 1-1/4" LG - 669.00 REF1 2 32-7/645 6-005 ASSEMBLY1/1REQ'DDESCRIPTIONPART NO. ITEM1 - 620-405 12 BEARING, IDLER 020-100 24REVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNTOL. FINISHTO BEX/X P 1/64TITLE:X.X.XX.XXX.XXX125P .050P .020P .010 ANGLES DATE:P 1DP .005RELEASENO.PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645IDLER, TENSION, FIXEDORCA III43 2 11-24- DRAWN BY: SCALE: SIZE: Dwg:94 P.R1:1.C001-005DCBAGBC Pro - Tech Parts ManualO III : 001 - 005 Idler, Fixed

© GBC Pro - Tech April 1999 Page 8 - 1153/64 REFREQ'D1 2 3-006SCALE: 1/1ASSEMBLYDESCRIPTIONREVISIONX/XX.X.XX.XXX.XXX4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:PART NO.1 IDLER, 2 X 64", CHROME 620-405 12 BEARING, IDLER 020-100 24 SETSCREW, 10-32 X 3/16" LG - 31 IDLER SHAFT 710-111 4Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:1-24-94 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685IDLER, PAPER INFEEDORCA IIIDwg:001-006ITEMGBC Pro - Tech Parts ManualO III : 001 - 006 Idler, Table

© GBC Pro - Tech April 1999 Page 8 - 12134103526119817.875-058SCALE: 1/2REQ'D DESCRIPTIONPART NO. ITEMASSEMBLY1 CYL, PULL ROLL (BIMBA FO-174) 320-300 11 BRACKET, CYL MNT, RT 510-082 21 SHIM DISK, PULL ROLL, RT X92-0091 31 BRACKET, LIFT, PULL ROLL X92-0138 41 PLUNGER, BALL 098-120 52 FITTING, AIR, MALE 1/8 NPT 330-590 62 VALVE, AIR CONTROL, 1/8 NPT 330-120 74 CAP SCREW, SOCKET, 10-32 X 3/4 - 81 NUT, JAM, 3/8-24 - 92 LOCK COLLAR, 3/8-24 290-190 101 BOLT, SHOULDER, 1/4 X 3/8 - 112 CAP SCREW, SOCKET, 3/8-16 X 3/4 - 121 JAM NUT, 1/4-20 - 13RLM1-2-96 2502REVISIONAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX12TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-8-94 P.R. C2Pro-Tech Engineering4151 Anderson Road, Madison, WI 53532Phone (608) 246-8844 Fax (608) 246-8645CYLINDER, PULL ROLL, RT.ORCA IIIDwg:001-058GBC Pro - Tech Parts ManualO III : 001 - 058 Cylinder, Pull Roll, Drive

© GBC Pro - Tech April 1999 Page 8 - 13154-O599637 1182SCALE-1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 CYL, PULL ROLL, (BIMBA FO-174) 320-300 11 BRACKET, CYL MNT, LF 510-079 21 SHIM DISK, PULL ROLL, LF X92-0092 32 VALVE, AIR CONTROL, 1/8 NPT 330-120 42 FITTING, AIR, MALE 1/8 NPT 330-590 51 ASSEMBLY, SHAFT, CYLINDER, PULL ROLL 001-304 61 PLUNGER, BALL 098-120 78 CAP SCREW, SOCKET, 10-32 X 3/4 - 81 BOLT, SHOULDER, 1/4 X 3/8 - 92 CAP SCREW, SOCKET, 3/8-16 X 3/4 - 101 JAM NUT, 1/4-20 - 1110REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2-9-94 P.R. C22117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685CYLINDER, PULL ROLL, LFORCA IIIDwg:001-059GBC Pro - Tech Parts ManualO III : 001 - 059 Cylinder, Pull Roll, Control

R© GBC Pro - Tech April 1999 Page 8 - 14DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4.004C(68.43)43354.00B2.50REQ'D2XC.312C.531 X 82D C'SINK22DESCRIPTION(5.16)32959MSU2X SCALE9-29-97B2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXP 1/64P .050P .020P .010P .00541SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCETOL.FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.2-23-941PART NO.1 TABLE, SMALL,GREY 760-048 11 EXTRUSION, ALUM 110-110 22 T-NUT 050-001 31 SCREW,SET,1/4-20 X 1.0 050-020 42 FHCS, 1/4-20 X 1 LG - 5PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,TABLE,SMALLORCA II,IIIDRAWN BY: SCALE: SIZE:P.R. 1:2 CDwg:ITEM001-083DCBAGBC Pro - Tech Parts ManualO III : 001 - 083 Table, Small

R© GBC Pro - Tech April 1999 Page 8 - 15DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4.004C(68.43)3354.0061.38B4.37A2REQ'DDESCRIPTIONPART NO. ITEM1 TABLE, LARGE 760-049 11 EXTRUSION, ALUM 110-110 21 EXTRUSION, ALUM 110-100 34 T-NUT 050-001 41 SCREW,SET,1/4-20 X 1.0 050-020 54 FHCS, 1/4-20 X 1 LG - 64X C.312C.531 X 82D C'SINK2(8.75)3KL429550867MS9-29-972-9-95BAU2X SCALE2 1REVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.52-23-941PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY,TABLE,LARGEORCA II,IIIDRAWN BY: SCALE: SIZE:P.R. 1:1 CDwg:001-084DCBAGBC Pro - Tech Parts ManualO III : 001 - 084 Table, Large

© GBC Pro - Tech April 1999 Page 8 - 16354REQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, FRONT, RT 510-056 11 KNOB, LOCK-DOWN, TABLE 465-200 21 BUMPER, RUBBER 465-500 34 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 - 41 NUT, 1/4-20 - 5-0851 2SCALE: 1/1ASSEMBLYREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-23-94 P.R. C1Pro-TechEngineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, FRONT, RTORCA II, ORCA IIIDwg:001-085GBC Pro - Tech Parts ManualO III : 001 - 085 Bracket, Front Table, Drive

© GBC Pro - Tech April 1999 Page 8 - 17REQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, FRONT, LF 510-055 11 KNOB, LOCK-DOWN, TABLE 465-200 21 BUMPER, RUBBER 465-500 34 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 - 41 NUT, 1/4-20 - 5-086SCALE: 1/2ASSEMBLY2 4 1 3 5REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2-23-94 P.R. C22117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, FRONT, LFORCA II, ORCA IIIDwg:001-086GBC Pro - Tech Parts ManualO III : 001 - 086 Bracket, Front Table, Control

© GBC Pro - Tech April 1999 Page 8 - 1862-087SCALE: 1/1REQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, TABLE, REAR, RT 510-067 11 SUPPORT, BRACKET X92-0125 21 KNOB, LOCK-DOWN, TABLE 465-200 31 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 - 41 BOLT, SHOULDER, 1/4 X 3/8 - 51 WASHER, FLAT, 1/4 - 6ASSEMBLY513REVISION4This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-24-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, REAR, RTORCA IIIDwg:001-087GBC Pro - Tech Parts ManualO III : 001 - 087 Bracket, Rear Table, Drive

© GBC Pro - Tech April 1999 Page 8 - 193 1 54REQ'D DESCRIPTIONPART NO. ITEM-0881 BRACKET, TABLE, REAR, LF 510-069 11 SUPPORT, BRACKET X92-0125 21 KNOB, LOCK-DOWN, TABLE 465-200 31 SCREW, ALLEN, FLT HD, 1/4-20 X 1/2 LG - 41 BOLT, SHOULDER, 1/4 X 3/8 - 51 WASHER, FLAT, 1/4 - 6SCALE: 1/1ASSEMBLY2REVISIONDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0056This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEFINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-24-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685BRACKET, TABLE, REAR, LFORCA IIIDwg:001-088GBC Pro - Tech Parts ManualO III : 001 - 088 Bracket, Rear Table, Control

© GBC Pro - Tech April 1999 Page 8 - 20351-0964SCALE: 1/1REQ'D DESCRIPTIONPART NO. ITEMASSEMBLY1 TENSIONER, CHAIN 440-150 11 SPROCKET, 19T 440-130 21 STANDOFF, 1/2 ID X 1-3/4 755-000 31 BOLT, CHAIN TENSIONER X93-0047 41 NUT, NYLOCK, 1/2-13 - 52REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:3-3-94 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645TENSIONER, CHAINORCA II, ORCA IIIDwg:001-096GBC Pro - Tech Parts ManualO III : 001 - 096 Self tensioning Idler

© GBC Pro - Tech April 1999 Page 8 - 214-100SCALE: 1/1ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 COLLAR, BRAKE 515-050 11 COLLAR, ADJUST 515-051 21 COLLAR, LOCK, BRAKE 515-053 31 O-RING, 2-7/8 480-010 41 SET SCREW, 1/4-20 HALF DOG PT - 51 CAP SCREW, SOCKET, 3/8-24 X 1-1/4 - 61 SPRING, WAVE 089-120 71 2 3 567REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:3-7-94 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645BRAKE, UNWINDORCA II, ORCA IIIDwg:001-100GBC Pro - Tech Parts ManualO III : 001 - 100 Unwind Core Brake

© GBC Pro - Tech April 1999 Page 8 - 2234 5 26(7)REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT, IDLER 440-110 11 SPROCKET, 13T 440-125 21 BOLT, MOD., 3/4-16 X 1 505-002 31 NUT, JAM, 3/4-16 - 41 WASHER, THRUST 032-291 51 WASHER, STAR, INT. TOOTH, 3/4 068-002 62 WASHER, THRUST 032-130 77REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE1251ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:5-6-93 RAS A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY, SPROCKET, IDLER, ADJUSTABLEORCA IIIDwg:001-102GBC Pro - Tech Parts ManualO III : 001 - 102 Adjustable Chain Tensioner, Primary

© GBC Pro - Tech April 1999 Page 8 - 233515C1.25REQ'D DESCRIPTIONPART NO. ITEM1 LOCK COLLAR, CLAMP, MODIFIED 640-000 11 BLADE, HOOK 475-300 21 PLATE, BLADE, SLITTER 740-004 31 THUMBSCREW,10-32x3/8 /90179A827(McM) 092-110 42 PIN, ROLL, 3/32x.5 /98296A143(McMASTER) 095-110 5REVISION2This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX4TOL.P 1/64P .050P .020P .010P .0055/16-24FINISHTO BE125ANGLESP 1DTITLE:ALL DIMS REFERENCEPro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY, SLITTER, HOOK BLADEORCA 50, ORCA 2, ORCA 3Dwg:3-16-94 GTS A1 001-109GBC Pro - Tech Parts ManualO III : 001 - 109 Assembly, Slitters, Hooked

© GBC Pro - Tech April 1999 Page 8 - 2432-114REQ'D DESCRIPTIONPART NO. ITEMSCALE: 1/11 COLLAR, LOCK, CORE END 640-020 11 O-RING, 2-7/8 480-005 21 CAP SCREW, SOCKET, 3/8-24 X 1-1/4 - 3ASSEMBLY1K.L.8-10-95 REVISION1077AThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:4-14-94 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645COLLAR, CORE END, UNWINDORCA IIIDwg:001-114GBC Pro - Tech Parts ManualO III : 001 - 114 Unwind Core End

© GBC Pro - Tech April 1999 Page 8 - 25FG3218451ENOTE:REPLACE SUPPLIED BOLTSWITH ITEM 20TIGHTEN -11- ONTO -15- UNTIL ALL OF -9- ISPILOTED ON -14-. THE -13- AND -14- MUSTROTATE FREELY TOGETHER ON -15-.BLUE LOCTITE -11- TO -15-.1776119128EAJH2/15/99 3270AJH12/16/97 3006MS10-29-96 2591RAS9-20-95 1122J.S.6-13-95 1013P.R.9-21-94 0667P.R.5-17-94 0442REVISIONG19GGFGREQ'D DESCRIPTIONPART NO. ITEM1 ARM, SLITTER 740-006 11 COLLAR, INFEED SLITTER 740-052 21 SCREW, THUMB 505-010 31 SPRING, TENSION 089-150 41 ROLL PIN, 1/8 X 1/2 LG 095-100 51 DOWEL PIN, 3/16 X 1/2 LG 095-140 61 ROLL PIN, 3/32 X 5/8 LG 095-120 72 WASHER, CONCAVE 740-007 81 BEARING, THRUST, 5/16 X 5/8 032-003 9- - - 101 NUT, NYLOCK, 8-32 - 112 WASHER, THRUST, 5/16 X 5/8 032-004 121 BLADE, SLITTER, CIRCULAR 475-001 131 FLANGED BUSHING, STEEL 040-037 141 STRIP, 3/16 X 3/4 050-032 151 WASHER, THRUST, 3/16 X 1/2 032-005 161 LABEL, WARNING 450-012 171 RIVET, FLTHEAD, 1/8 X 1/4 X 1/4 LG - 182 O-RING 480-030 192 SHCS,STAINLESS STEEL 5/16-24 X 3/4 - 2013FEDCBA14GREASE I.D. WITHBEARING GREASELIKE DOW 44.This print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDEDIM.2117 N. Stoughton Rd. Madison, WisconsinTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/TITLEP 1/BEX 64:12X PSLITTER, INPUT5. .050X. PO2, O3, O1SPX .020X.X P ANGLEDATEDRAWNDWG DwgX .010:BY:SCALE::SPX.XX P1D 05-16-94 P.R. C1X .0051615Pro-Tech EngineeringF001-122GBC Pro - Tech Parts ManualO III : 001 - 122 Slitters, Infeed / Outfeed

© GBC Pro - Tech April 1999 Page 8 - 26DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4PROPRIETARYC33REQ'D-1231/1ASSEMBLY2DESCRIPTION1 22REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:PART NO.2 BEARING, IDLER 020-100 11 TUBE, SLITTER, PVC 490-288 21 IDLER, 2 X 64", CHROME 620-405 3Pro-Tech EngineeringIDLER, SLITTERORCA II, ORCA IIIDATE: DRAWN BY: DWG SCALE:5-23-94 P.R. B132117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:11001-123ITEMDCBAGBC Pro - Tech Parts ManualO III : 001 - 123 Idler, Slitter

© GBC Pro - Tech April 1999 Page 8 - 27MACHINEIDENTIFIERNOTES:O6308941234MONTHYEARSEQUENTIALNUMBERUSERIAL NUMBERUEXAMPLEModel No.ORCA 3220-24050/601. TYPE IN MODEL, SERIAL NUMBER, RATINGS,AND MISC. NOTES AS SHOWN.2. USE ONLY TYPEWRITER RIBBON UL RECOGNIZEDFOR USE WITH TAILORED LABEL PRODUCTMATERIAL NUMBER TLP 305. (SEE ABOVE)15513REQ'DPRO-TECH ENGINEERING, INC.MADISON, WISCONSINTHIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATIONIS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THISDEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THISDEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDINGINTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.Serial No.O63XXXXXXXXVACHzAmpsPhaseWiresREVISION230/400U.S. PATENT NOS: 5,316,609 5,114,520CISPR 22 CLASS BThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX50253 N5MADE IN U.S.A.TOL.P 1/64P .050P .020P .010P .005DESCRIPTIONFINISHTO BE125ANGLESP 1DRLISTEDI.T.E.6N10RTITLE:DATE: DRAWN BY: DWG SCALE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY, SERIAL PLATEORCA IIIDwg:PART NO.1 SERIAL PLATE, UL 450-01611 TYPEWRITER RIBBON, UL RECOGNIZED 450-02421 DECAL, TUV LOGO 450-0173UTUVUPRODUCT SERVICEgeprufteSicherheitSEE EXAMPLEPLACE TUVSTICKER HERE311-30-94 GTS A1 001-160ITEMGBC Pro - Tech Parts ManualO III : 001 - 160 Serial Plate

R© GBC Pro - Tech April 1999 Page 8 - 28DCBANOTES:1. INTERPRET DRAWING PER ANSI Y14.5M-1982A4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH454C3323101-164SCALE: 1/2ASSEMBLY112REQ'DDESCRIPTIONPART NO. ITEM1 SHIELD, MAIN ROLL 585-006 11 ALUMINUM EXTRUSION, 1010 X 68" 110-013 21 HINGE, LIFTOFF, #2073, RH 100-012 31 HINGE, LIFTOFF, #2074, LH 100-013 42 SPACER, ROUND PLASTIC, 1/2 X 1/2 040-006 54 MOUNT, PANEL, #2427 100-014 64 SCREW,NYLON,HEX HEAD, 1/4-20 X 3/4 - 1026274327122624RLM5/1/97MS4-1-97MS12-30-96REVISIONCBASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:DATE: 08-17-94RELEASENO.14151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:PRO-TECHASSY,SHIELD,MAIN ROLLORCA IIISCALE:P.R. 1/1SIZE:CDwg:001-164DCBAGBC Pro - Tech Parts ManualO III : 001 - 164 Shield

© GBC Pro - Tech April 1999 Page 8 - 2945321- 165SCALE: 1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 BRKT, SHIELD, STOP, RIGHT 510 - 096 11 BUMPER, RUBBER, CONICAL 465-500 23 WASHER, FLAT, 1/4" - 31 NUT, 1/4-20 - 42 SCREW, CAP, 10-32 X 1/2 LG - 5REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:8-17-94 P.R. A2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASS'Y, BRACKET, STOP, SHIELDRIGHT - ORCA 3Dwg:001-165GBC Pro - Tech Parts ManualO III : 001 - 165 Stopper, Shield, Drive

© GBC Pro - Tech April 1999 Page 8 - 30-16643215SCALE: 1/2ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 BRKT, STOP, SHIELD, LF 510-097 11 BUMPER, RUBBER, CONICAL 465-500 23 WASHER, FLAT, 1/4" - 31 NUT, 1/4-20 - 42 SCREW, CAP, 10-32 X 1/2 LG - 5REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:8-17-94 P.R. A22117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASS'Y, BRACKET, STOP, SHIELDLEFT- ORCA 3Dwg:001-166GBC Pro - Tech Parts ManualO III : 001 - 166 Stopper, Shield, Control

© GBC Pro - Tech April 1999 Page 8 - 3129652559REQ'D DESCRIPTIONPART NO. ITEMMS10-6-97AJT06-07-96RLM4-10-96 2538RLM12-13-95 2499P.R.6-1-95 0999EDCBA4 ASSY, SLITTER, INFEED/OUTFEED 001-122 14 CARRIER, FUSE, INTERNATIONAL 186-001 24 FUSE, 1-1/4X1/4, SB, 3AG 186-200 34 PAD, LEVELING 470-100 41 TAPE, MASKING 475-000 51 BOX, ACCESSORY 475-010 61 MEASURE, TAPE, 475-100 71 WRENCH, ALLEN, T-HANDLE, 5/16 475-220 81 WRENCH SET, ALLEN 475-230 92 BLADE, SLITTER, HOOKED 475-300 101 KNIFE, ZIPPY 475-620 111 COUPLING, 1/4, AIR FITTING 330-000 121 AIR HOSE, W/FITTINGS, 12FT 360-000 134 O-RING, BRAKE 480-005 141 ERASER, CHARRETTE 930320 151 MANUAL, OPERATION, ORCA II 930402 162 ASSY, SLITTER, OUTFEED 001-109 171 BRAKE PAD, UNWIND/REWIND 375-000 181 BRAKE, MOUNTED, UNWIND/REWIND 625-006 191 WRENCH, ALLEN, 1/4, MOD. 485-001 201 BLADE, CIRCULAR 475-001 211 STAIN RELIEF,MAIN POWER 175-201 22REVISIONUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: DRAWN BY: DWG SCALE: Dwg:RASSEMBLY, ACCESSORY PACKORCA III001 - 170GBC Pro - Tech Parts ManualO III : 001 - 170 Accessory Pack

R© GBC Pro - Tech April 1999 Page 8 - 32119 101 2 3SECTIONA-SCALE: 1/ A18 7456REQ'DADESCRIPTIONREVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64125X. P .050X.X P .020X.XX P .010 ANGLESP 1DX.XXX P .0051TITLE:PART NO.1 PLUG, CLUTCH, ORCA I X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SPRING CLIP, 5100 - 100 090-140 71 COMPRESSION SPRING, C1225 - 105 - 1500M 089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 114151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY, REWIND,ORCA BRAKEIIIDRAWN BY: SCALE:RAS 1:2PRO-TECHSIZE:CDwg:ITEM11-15-DATE:94RELEASENO.001-181GBC Pro - Tech Parts ManualO III : 001 - 181 Rewind Brake

© GBC Pro - Tech April 1999 Page 8 - 332 15(5)NOTES:1. 22 GA. WIRE (ITEM 3) TO BESOLDERED TO SWITCH TERMS2 AND 3.2. LABEL WIRE FROM TERM2 #353. LABEL WIRE FROM TERM3 #36(4)REQ'D DESCRIPTIONPART NO. ITEM1 SWITCH, ON-OFF, FAN 214-270 11 COVER, ROCKER SWITCH, BLACK 214-296 22 WIRE, 22 AWG, RED, 1-1/2" LG - 32 DISCONNECT, MALE, .110 - 43 TUBING, HEAT SHRINK - 5REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0054FINISHTO BE125ANGLESP 1D(5)TITLE:(3)132Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:11-17-94 P.R. A132117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASS'Y, SWITCH, FANORCA IIIDwg:001-189GBC Pro - Tech Parts ManualO III : 001 - 189 Switch, Cooling Fans

© GBC Pro - Tech April 1999 Page 8 - 34LOADAPPLY LOCTITE BLUELINEA1 23 5 4ALOADLINENOTE:ALL GROUNDS ARE COLORED GREEN, 10" LONG TWISTED.REQ'D DESCRIPTIONPART NO. ITEM1 FILTER, MOTOR BOARD 185-003 11 PLATE, FILTER MOUNT 672-013 22 FILTER, AC LINE 185-002 310 BHCS, 6-32 X 1/4 - 410 WASHER, FLAT, #6 - 5LOADLINEAJH12/24/97 3010REVISIONAThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:BHCS #10-32 x 1/4DATE: DRAWN BY: DWG SCALE:12-30-94 P.R. C2Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, NOISE FILTERORCA IIIDwg:A001-225GBC Pro - Tech Parts ManualO III : 001 - 225 Noise Filter

© GBC Pro - Tech April 1999 Page 8 - 35REQ'D DESCRIPTIONPART NO. ITEM2 BEARING, IDLER 020-100 11 IDLER, 2 X 64", CHROME 620-405 2REVISIONUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1D2 1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.TITLE:DATE: DRAWN BY: DWG SCALE:Pro-Tech EngineeringASSY,IDLERORCA II, ORCA III1-10-95 K.L. A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:001-226GBC Pro - Tech Parts ManualO III : 001 - 226 Idler, Removable

© GBC Pro - Tech April 1999 Page 8 - 3612(4.5) (7.0)5678(11.0) (25.5)34910REQ'D DESCRIPTIONPART NO. ITEM1 DUCT COVER, 2", 4 - 1/2 " LG 180-120 11 DUCT BASE, 2", 4-1/2" LG WITH ADHESIVE 180-100 21 DUCT COVER, 2", 7" LG 180-120 31 DUCT BASE, 2", 7" LG WITH ADHESIVE 180-100 41 DUCT COVER, 2", 11" LG 180-120 51 DUCT BASE, 2", 11" LG WITH ADHESIVE 180-100 61 DUCT COVER, 2", 25-1/2" LG 180-120 71 DUCT BASE, 2", 25-1/2" LG WITH ADHESIVE 180-100 82 DUCT COVER, 1", 5" LG 180-130 92 DUCT BASE, 1", 5" LG WITH ADHESIVE 180-110 101 DUCT COVER, 1", 9" LG 180-130 111 DUCT BASE, 1" 9" LG WITH ADHESIVE 180-110 121 DUCT COVER, 1", 11" LG 180-130 131 DUCT BASE, 1", 11" LG WITH ADHESIVE 180-110 141112(5.0)(9.0) (11.0)REVISIONUNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1D1314This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.TITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:08-16-95 P.R. C12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, PANDUIT, MAINCHASSISDwg:001-231GBC Pro - Tech Parts ManualO III : 001 - 231 Wire Duct Set

© GBC Pro - Tech April 1999 Page 8 - 37PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC3.25REQ'D- DIN RAIL 217-200 -4.2510.50 13.25REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645SET, DIN RAIL-DATE: 7-19-96 DRAWN BY: SCALE:RELEASERLM 1/1NO.RPART NO.PRO-TECHSIZE:ADwg:ITEM001-233GBC Pro - Tech Parts ManualO III : 001 - 233 Din Rail Set

© GBC Pro - Tech April 1999 Page 8 - 384 5 3 (7) 26 9 8 7REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT, IDLER 440-110 11 SPROCKET, 13T 440-125 21 BOLT, MOD., 3/4-16 X 1 505-002 31 NUT, JAM, 3/4-16 - 41 WASHER, THRUST 032-291 51 WASHER, STAR, INT. TOOTH, 3/4 068-002 62 WASHER, THRUST 032-130 71 BEARING, THRUST 032-120 81 WASHER, THRUST 032-145 9REVISION1This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:2-23-95 P.R. A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-4685ASSEMBLY, SPROCKET, IDLER, ADJUSTABLEOUTER - ORCA IIIDwg:001-242GBC Pro - Tech Parts ManualO III : 001 - 242 Adjustable Chain Tensioner, Secondary

© GBC Pro - Tech April 1999 Page 8 - 39REQ'D DESCRIPTIONPART NO. ITEM2 DECAL,DANGER HAZARDOUS VOLTAGE 450-131 11 DECAL,WARNING MOVING PARTS 450-132 22 DECAL,WARNING CRUSH AND BURN,LEFT 450-133 32 DECAL,WARNING CRUSH AND BURN,RIGHT 450-134 41 DECAL,WARNING READ MANUAL 450-135 51 DECAL,READ SAFETY INSTRUCTIONS 450-136 61 DECAL,WARNING,MODIFIED CRUSH/CUT 450-011 73 DECAL, ELECTRICAL HAZARD 450-035 82 DECAL, ELECTRICAL HAZARD 450-180 9AJH2/22/99 3278AREVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech EngineeringDATE: DRAWN BY: DWG SCALE:3-2-95 K.L. A12117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645KIT, SAFETY LABELORCA IIIDwg:001-259GBC Pro - Tech Parts ManualO III : 001 - 259 Safety Label Set

© GBC Pro - Tech April 1999 Page 8 - 40ITEM 3 NOTE:USE 1/4-20 X 4 EYE BOLT ONUPPER BRACKET THISLOCATION. SECURE WITH HEX NUT.311110F9147131284-285SCALE: 1/296 5ASSEMBLYREQ'D DESCRIPTIONPART NO. ITEM1 BRACKET, HEATER,CONTROL SIDE 510-164 11 SET SCREW, 1/4-20 X .5 CUP POINT - 22 SHCS, 1/4-20 X .5 LG - 31 BRACKET,MOUNTING,SWITCH,OVERHEAT 510-149 42 SHCS,10-32 X .38 - 52 WASHER,FLAT,#10 - 61 SWITCH,BASIC,ROLLER LEVER 214-000 71 SHCS,#4-40 X .5 - 83 WASHER,FLAT,#4 - 91 SHCS,#4-40 X .62 - 101 NUT,HEX,#4-40 - 111 LOCKCOLLAR 290-004 121 SETSCREW,1/2-13, FLAT TIP 131 NUT, HEX, JAM, 1/4-20 - 142ITEM 13 NOTE:REPLACE STOCK SETSCREWITEM 9,10 & 11 NOTE:USE WASHER, ITEM 9 ON TOP & BOTTOM.REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:FDATE: DRAWN BY: DWG SCALE:3-28-95 P.R. C1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASS'Y, BRKT, HTR, UPPER &LOWER,%%C.75 , CONTROL SIDE,Dwg:001-285GBC Pro - Tech Parts ManualO III : 001 - 285 Over-temp Protection

© GBC Pro - Tech April 1999 Page 8 - 41.50USE SERVICE REMOVABLETHREAD LOCKING COMPOUND(THIS NUT ONLY).875110.25-304REQ'D DESCRIPTIONPART NO. ITEM1 SHAFT, LIFT, PULL ROLL 710-052 12 COLLAR, LOCK, 3/8-24 290-190 23 NUT, HEX, 3/8-24 - 3SCALE:1/1P.R.7-27-95 REVISION1057UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0053ASSEMBLYAFINISHTO BE125ANGLESP 1D(1.25)This print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.TITLE:2DATE: DRAWN BY: DWG SCALE:6-21-95 P.R. A1Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, SHAFT, CYLINDER,PULL ROLLDwg:001-304GBC Pro - Tech Parts ManualO III : 001 - 304 Shaft, Pull Roll Cylinder, Control

© GBC Pro - Tech April 1999 Page 8 - 42181719161415222420 21A131223REMOVE PAINT FROM INSIDEOF SIDEFRAME HOLE. UDO NOTUEXCEED 1.003 DIA.SECTION11A-ASCALE: 1/1-2369 101 2 3SCALE: 1/2ASSEMBLY8 7456AREQ'DREVISIONDESCRIPTIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE: DRAWN BY: DWG SCALE:9-18-95 K.L. C2Pro-Tech EngineeringASSY,DRIVEORCA IIIPART NO.1 PLUG, CLUTCH, ORCA I, II X92-0112 11 SHAFT, REWIND, STANDOFF X92-0113 21 KNOB, CLUTCH, KNURLED 625-007 31 3/8-16 X 1 LG SHCS - 41 3/8 FLATWASHWER - 51 3/8 LOCKWASHER - 61 SPRING CLIP, 5100 - 100 090-140 71 SPRING , 1" ID X 1-3/8 LG089-200 82 WASHER, THRUST, .030 THK 032-242 91 BEARING, THRUST 032-390 101 SNAP RING, 3/4 SHAFT, EXTERNAL 090-135 111 PLUG, CLUTCH DRIVE X92-0111 121 WASHER, THRUST, .090 THK 032-420 131 WASHER, THRUST .030 THK 032-410 141 BEARING, THRUST 032-400 151 BUSHING, BOST-BRONZE 040-003 161 KEY, 1/4 X 1/4 X 5/8 LG - 171 BOLT, CLUTCH DRIVE, ORCA I, II 645-008 181 LOCK NUT, 5/8-11 HEX - 191 SPROCKET, 26 TOOTH 435-215 202 WASHER, THRUST, .090 THK 032-205 211 BEARING, THRUST 032-190 221 TUBE, CARDBOARD 860-003 233 WASHER, THRUST .030 THK 032-170 24FOR THE REAR REWIND DRIVE, ITEM NUMBER* 20 IS FLIPPED SO THAT THE TEETH OF THESPROCKET IS CLOSEST TO THE SIDE FRAME.2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:001-326ITEMGBC Pro - Tech Parts ManualO III : 001 - 326 Rewind Drive

© GBC Pro - Tech April 1999 Page 8 - 4311Solder21SolderREQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 METAL-OXIDE VARISTOR 185-006 22 SHRINK TUBE, 1/8 DIA. BY 1.0" 180-425 31 SHRINK TUBE, 0.5" DIA. BY 0.85" 180-450 4REVISIONApply a heat shrink tube after solderingThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY. MOV FOR O-III SSR, F 60DATE: DRAWN BY: DWG SCALE:3-26-96 HZ A134Dwg:001-342GBC Pro - Tech Parts ManualO III : 001 - 342 M.O.V.

© GBC Pro - Tech April 1999 Page 8 - 44PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH1NOTES:1. PARTS ARE SHIPPED LOOSE.2. ONE KIT IS REQUIRED FOR EACH MACHINE.C25INSULATING SLEEVE(REMOVED)REQ'D2 SPACER, HEATER SPRING 755-061 12 SPRING 089-200 2- SLEEVE, INSULATING 180-006 31 INSTRUCTIONS, HEATER TENSION 820-074 4REVISIONSHEET 2106 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTIONFINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.7/10/98DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645KIT, HEATER TENSIONORCA 32106SCALE:PART NO.4 #10 EXTERNAL LOCK WASHER - 54 ZIP TIE, 8" - 6636SIZE:SNF 1:1 ADwg:ITEM005-036GBC Pro - Tech Parts ManualO III : 005 - 036

GBC Pro - Tech Parts ManualOrca IVIllustrated Parts Diagrams( 000 - 060 )Available Options ;001 - 467 ( Preheater )© GBC Pro - Tech April 1999 Page 9 - 1

© GBC Pro - Tech April 1999 Page 9 - 2545 - 375Cover, left, drive450 - 059Decal, graphics450 - 180Decal, warning001 - 440Brake panel, front214 - 313Push button, E-Stop670 - 520Panel, front670 - 525Panel, botomGBC Pro-Tech470 - 120Castor, wheelsDrive Side505 - 005Bolt, foot545 - 370Cover, right, drive450 - 180Decal, warning670 - 525Panel, top670 - 510Panel, rear001 - 438Control panel, rear214 - 314Contact, E-Stop001 - 480Accessory pack545 - 375Cover, left, control450 - 180Decal, warning670 - 525Panel, top001 - 436Control panel, front450 - 110Decal, E-Stop450 - 136Decal, Read Safety670 - 510Panel, front670 - 525Panel, botomControl Side214 - 301Contact, disconnect(1) 186 - 125Fuse, SB, 3AG, 1 amp(3) 186 - 238Fuse, 3AB, 8amp, ceramic186 - 002Fuse carrierGBC Pro-Tech186 - 000Fuse holder545 - 370Cover, right, drive450 - 059Decal, graphics450 - 180Decal, warning670 - 515Panel, rear001 - 442Brake panel, rear450 - 135Decal, read manual450 - 062Decal, reset214 - 008Push button, reset214 - 400Knob, rotary186 - 013Circuit Breaker465 - 015Pull handleGBC Pro - Tech Parts ManualO IV : Cabinets And Covers

GBC Pro - Tech Parts ManualO IV : Front And Rear ViewsFront View530 - 018Core stopper530 - 019Core support530 - 026Core chuck510 - 293Bracket, pivot door510 - 292Bracket, pivot door001 - 530Assembly, shaft, core230 - 006Infrared sensor001 - 440Brake panel, front, drive001 - 436Control panel, control, front060 - 08Main roll lift690 - 051Main roll690 - 029Main roll, lower585 - 065Guard doors670 - 520Panel, cabinet026 - 110Bearing, flanged430 - 004Gear reducer670 - 510Panel, cabinet510 - 292Bracket, pivot door510 - 293Bracket, pivot door510 - 290Bracket, foot425 - 001Motor780 - 003Cable, E-Stop214 - 017Switch, cable, E-Stop510 - 291Bracket, footRear View510 - 293Bracket, pivot door510 - 292Bracket, pivot door585 - 065Guard doors230 - 006Infrared sensor001 - 442Brake panel, rear, control001 - 438Control panel, drive, rear214 - 314Contact, E-Stop690 - 015Pull roll, upper020 - 150Bearing, pressed in214 - 008Switch, reset186 - 013Circuit breaker214 - 313Push button, E-Stop690 - 012Pull roll, driven026 - 100Bearing, flanged214 - 400Knob, rotary670 - 510Panel, cabinet510 - 292Bracket, pivot door510 - 291Bracket, foot060 - 09Air filter470 - 120Castor, wheel510 - 293Bracket, pivot door510 - 290Bracket, foot© GBC Pro - Tech April 1999 Page 9 - 3

C1C4C645C2C3C5A5C7A46GBC Pro - Tech Parts ManualO IV : Control Side - Components730 - 014Side frame, control214 - 314Contact, E-Stop001 - 436Control panel, front214 - 313Push button, E-Stop189 - 332Heater001 - 442Brake panel, rear001 - 458Assembly, electrical panel207 - 005Solid state relay222 - 000PLC, FX - 80001 - 465Assembly, terminal, PLC output001 - 464Assembly, terminal, PLC input180 - 100Wire duct, 2 x 1, generic180 - 120Cover, wire duct, 2, generic182 - 004Fan, dual blower001 - 474Assembly, terminal, cooling001 - 468Assembly, terminal, power182 - 002Fan, centalfugal186 - 013Circuit breaker185 - 026Filter, line001 - 420Assembly, air valves222 - 001Module, D to A350 - 162Solenoid, pull rolls350 - 162Solenoid, main rolls350 - 004Solenoid, pre heater350 - 004Solenoid, shaft locks© GBC Pro - Tech April 1999 Page 9 - 4

C1C4C6A45C57A46C2C3C5GBC Pro - Tech Parts ManualO IV : Control Side - Hardware510 - 567Bracket, main roll lift330 - 008Air fitting, straight, 1/8 NPT320 - 330Air cylinder, main320 - 003Cylinder, pancake060 - 08Main roll Lift730 - 014Side frame, control060 - 18Air line strip330 - 011Air fitting320 - 001Air cylinder, catch629 - 008Lever, hook510 - 164Bracket, heater026 - 110Bearing, flanged320 - 220Air cylinder, pull060 - 19Locking pin500 - 051Bearing, take-up026 - 100Bearing, pull roll350 - 160Manifold, 2 station350 - 160Manifold, 2 station465 - 015Pull handle060 - 20Air line strip510 - 290Bracket, foot510 - 291Bracket, foot470 - 120Castor, wheels505 - 005Bolt, foot© GBC Pro - Tech April 1999 Page 9 - 5

3.3K3.3K3.3K3.3K3.3KGBC Pro - Tech Parts ManualO IV : 001 - 458 Electrical Panel207 - 003Cover, ssr207 - 005Solid state relay001 - 342Assembly, M.O.V.185 - 028Mounting kit185 - 024Regulator, 5vdc510 - 265Bracket, fan182 - 000Fan, 24vdc4 3INPUTOUTPUT1 2185 - 028Mounting kit185 - 025Regulator, 12vdc182 - 012Guard, fan, 3"245 - 200Power supply610 - 100Heat sink, ssr217 - 201Din rail, 16.75"217 - 019End block222 - 002Ram cassette001 - 465Assembly, terminal, outputMITSUBISHIBATT.VPROG.ECPU.ERUNPOWERMELSEC FX-80MT TRANSISTOR UNIT222 - 000PLC, FX-80185 - 027Resistor, 3.3K, 1/4 watt3.3K3.3K001 - 464Assembly, terminal, input185 - 052BeeperPOWERFX-2DACrouzetKNA2670 - 030Panel222 - 001Module, D TO A217 - 019End block© GBC Pro - Tech April 1999 Page 9 - 6

GBC Pro - Tech Parts ManualO IV : Front And Rear Control Panel001 - 436 Front Control Panel670 - 400Panel450 - 047Overlay340 - 002Regulator001 - 486PCB330 - 012Fitting, elbow330 - 006Clamp, tubing330 - 910Fitting, Barb330 - 012Fitting, elbowGBCRPro - Tech360 - 005Tubing, black, 8"465 - 031Knob, speed219 - 004Encoder, mechanical001 - 438 Rear Control Panel350 - 001Switch, air330 - 007Fitting, elbow330 - 008Fitting, straight670 - 401Panel340 - 002Regulator001 - 487PCB330 - 012Fitting, elbow330 - 006Clamp, tubing330 - 910Fitting, Barb330 - 012Fitting, elbowGBCRPro - Tech450 - 048Overlay360 - 005Tubing, black, 8"1 2 3 451 2 3 45465 - 031Knob, speed219 - 004Encoder, mechanical© GBC Pro - Tech April 1999 Page 9 - 7

GBC Pro - Tech Parts Manual001 - 440 Front Brake PanelO IV : Front & Rear Brake Panel670 - 405panel330 - 410Connector, air217 - 008Din rail, 4"450 - 080Over lay214 - 297Cover, black214 - 297Cover, black214 - 290Switch, rocker185 - 050Sensor, pressure330 - 006Clamp, tubing185 - 020End barrier217 - 021Bridge bar185 - 022Contact block185 - 020End barrier214 - 297Cover, black214 - 290Switch, rocker001 - 380PCB214 - 297Cover, black214 - 016Lens, switch330 - 019Reducer, plug-in280 - 018Cable, sensor214 - 015Switch, push001 - 442 Rear Brake Panel670 - 406panel450 - 081Over lay330 - 410Connector, air214 - 297Cover, black185 - 050Sensor, pressure214 - 290Switch, rockerSame as above214 - 297Cover, black330 - 006Clamp, tubing214 - 290Switch, rocker214 - 297Cover, black330 - 019Reducer, plug-in214 - 290Switch, rockerGBCRPro - Tech214 - 016Lens, switch280 - 018Cable, sensor214 - 015Switch, push button001 - 481PCB© GBC Pro - Tech April 1999 Page 9 - 8

GBC Pro - Tech Parts ManualO IV : Drive Side - Components001 - 501Assembly, encoders214 - 005Micro switch, doors189 - 332Heater001 - 438Assembly, control panel, rear001 - 440Assembly, brake panel, front214 - 313Push button, E-Stop214 - 314Contact, E-Stop182 - 004Fan, dual blower001 - 459Assembly, motor controller001 - 475Assembly, terminal, cooling182 - 002Fan, centrifugal blower340 - 004Regulator, electronic430 - 004Gear reducer001 - 466Assembly, terminal, sensors425 - 001Motor© GBC Pro - Tech April 1999 Page 9 - 9

GBC Pro - Tech Parts ManualO IV : Drive Side - Hardware375 - 005Brake, unwind060 - 15Clutch, rewind, 20T060 - 08Main roll lift060 - 14Tensioner idler060 - 13Idler, upper drive060 - 15Clutch, rewind060 - 21Pull roll lift320 - 001Air cylinder, catch320 - 220Air cylinder, pull roll060 - 12Idler sprocket375 - 002Clutch, pull roll400 - 011Chain, main drive400 - 010Chain, lower drive060 - 22Clutch, rewind, 18T400 - 012Chain, upper drive060 - 15Clutch, rewind, 20T060 - 17Self tensioner, 1-15/16375 - 006Brake, unwind510 - 165Bracket, heater, drive435 - 009Sprocket, main roll040 - 020Bushing060 - 12Idler sprocket060 - 16Self tensioner, 1/2375 - 005Brake, unwind510 - 293Bracket, door505 - 005Foot bolt060 - 11Motor sprocket510 - 292Bracket, door470 - 120Castor, wheels© GBC Pro - Tech April 1999 Page 9 - 10

GBC Pro - Tech Parts ManualO IV : Inside Parts755 - 200Stand-offs, cam, Drive755 - 201Stand-offs, cam, control450 - 076Decal, back strain770 - 007Tie bar, painted001 - 005Assembly, idlers, fixed001 - 530Assembly, shaft, core510 - 569Bracket, right585 - 060Guard, right320 - 001Air cylinder585 - 060Guard, left325 - 003Rod end, ball joint510 - 568Bracket, Left325 - 003Rod end, ball joint001 - 305Assembly, stand-off060 - 08Main roll lift060 - 10Cooling system585 - 064Guard615 - 006Housing, blower484 - 100Seal, brush770 - 395Tie bar, chrome024 - 101Bearing, cam followerSame as above060 - 11Detail, motor060 - 09Air filter770 - 007Tie bar, painted540 - 401Conduits© GBC Pro - Tech April 1999 Page 9 - 11

© GBC Pro - Tech April 1999 Page 9 - 12325 - 215Bracket320 - 330Air cylinder629 - 007Clevis link090 - 100Snap ring629 - 004Link, mian lift629 - 005Link, clevis, lift629 - 006Link, clevis, liftDrive Side510 - 567Bracket330 - 134Flow control290 - 004Collar w/ set screw510 - 562Bracket, drive086 - 001Clevis pin086 - 000Clevis pin090 - 135Snap ring500 - 051Bearing, take up585 - 060Guard, left060 - 005Grease fitting585 - 061Guard, right330 - 134Flow control290 - 010Threaded lock collar510 - 561Bracket, control086 - 001Clevis pin086 - 000Clevis pin090 - 135Snap ring500 - 051Bearing, take upControl Side510 - 567Bracket325 - 215Bracket320 - 330Air cylinder629 - 007Clevis link090 - 100Snap ring629 - 004Link, mian lift629 - 005Link, clevis, lift629 - 006Link, clevis, liftGBC Pro - Tech Parts ManualO IV : 060 - 08 Main Roll Lift ( CNO )

GBC Pro - Tech Parts ManualO IV : 060 - 09 Air Filter ( CNO )330 - 101Quick exhaust330 - 280Muffler330 - 210Fitting, 1/4 NPT100 - 220Bracket330 - 760Fitting, elbow340 - 250Filter330 - 260Coupler© GBC Pro - Tech April 1999 Page 9 - 13

GBC Pro - Tech Parts ManualO IV : 060 - 10 Cooling Idlers ( CNO )040 - 004Bushing068 - 008Spacer700 - 012Mount, cooling idler672 - 027Plate, air deflector032 - 291Thrust washer089 - 105Spring58VIEWED FROM FRONT OF MACHINE620 - 023Cooling idler© GBC Pro - Tech April 1999 Page 9 - 14

GBC Pro - Tech Parts ManualO IV : 060 - 11 Motor Sprocket ( CNO )435 - 010Sprocket, triple, 16T425 - 001Motor435 - 110Sprocket, 35A401/2"755 - 565Spacer430 - 004Gear reducer© GBC Pro - Tech April 1999 Page 9 - 15

GBC Pro - Tech Parts ManualO IV : 060 - 12 Idler Sprocket ( CNO )435 - 014Sprocket, idler, 17T032 - 300Thrust washer440 - 105SO 2 w/ collar032 - 250Thrust washer 032 - 300Thrust washer© GBC Pro - Tech April 1999 Page 9 - 16

GBC Pro - Tech Parts ManualO IV : 060 - 13 Idler, Upper Drive ( CNO )032 - 250Thrust washer, TRB1625032 - 300Thrust washer, TRD1625435 - 011Sprocket, triple, 20T440 - 100SO 4 w/ collar028 - 130Needle bearing028 - 130Needle bearing032 - 300Thrust washer, TRD1625© GBC Pro - Tech April 1999 Page 9 - 17

GBC Pro - Tech Parts ManualO IV : 060 - 14 Tensioner Idler ( CNO )435 - 014Sprocket, idler, 17T440 - 100SO 4 w/ collar290 - 440Lock collar, 1"© GBC Pro - Tech April 1999 Page 9 - 18

GBC Pro - Tech Parts ManualO IV : 060 - 15 Clutch Rewind, 20 T ( CNO )020 - 005Ball bearing501 - 050Bearing block090 - 000Snap ring, internal375 - 003Clutch, rewind, 20T090 - 140Spring clip020 - 005Ball bearing© GBC Pro - Tech April 1999 Page 9 - 19

GBC Pro - Tech Parts ManualO IV : 060 - 16 Self Tensioner, 1/2 ” ( CNO )440 - 003Tensioner w/ bolt435 - 013Sprocket, 17T505 - 006Bolt, modified© GBC Pro - Tech April 1999 Page 9 - 20

GBC Pro - Tech Parts ManualO IV : 060 - 17 Self Tensioner, 1-15/16” ( CNO )440 - 003Tensioner w/ bolt435 - 013Sprocket, 17T© GBC Pro - Tech April 1999 Page 9 - 21

GBC Pro - Tech Parts ManualO IV : 060 - 18 Airline Strip, Straight ( CNO )330 - 102Manifold330 - 016Fitting, straight330 - 012Male elbow330 - 016Fitting, straight330 - 014Plug330 - 007Fitting, elbow© GBC Pro - Tech April 1999 Page 9 - 22

GBC Pro - Tech Parts ManualO IV : 060 - 19 Locking Pins ( CNO )330 - 008Fitting, straight095 - 102Dowel pin( electrical side only )320 - 005Cylinder501 - 024Block710 - 074Stop shaft© GBC Pro - Tech April 1999 Page 9 - 23

GBC Pro - Tech Parts ManualO IV : 060 - 20 Airline Strip, Elbow ( CNO )330 - 730Elbow, male330 - 007Fitting, elbow330 - 007Fitting, elbow330 - 004Elbow, male330 - 103Manifold330 - 730Elbow, male© GBC Pro - Tech April 1999 Page 9 - 24

GBC Pro - Tech Parts ManualO IV : 060 - 21 Pull Roll Lift ( CNO )330 - 133Flow control330 - 007Male elbow320 - 001Cylinder330 - 133Flow control325 - 220Bracket320 - 220Air cylinder629 - 008Lever, hook585 - 064Guard325 - 003Rod end ball joint026 - 100Bearing, flanged089 - 014Wave spring290 - 560Split collar290 - 560Split collar710 - 035Shaft032 - 420Thrust washer,TRC-2031640 - 009Shaft collar© GBC Pro - Tech April 1999 Page 9 - 25

GBC Pro - Tech Parts ManualO IV : 060 - 22 Clutch Rewind, 18T ( CNO )375 - 004Clutch, rewind, 18T501 - 050Bearing block090 - 000Snap ring, internal090 - 140Spring clip020 - 005Ball bearing020 - 005Ball bearing© GBC Pro - Tech April 1999 Page 9 - 26

R© GBC Pro - Tech April 1999 Page 9 - 27DCBA4 3 2PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH42-7/64C69.00 REF1 2 3-005 ASSEMBLY1/1REQ'D4DESCRIPTIONREVISIONSHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.5 61-24-94PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645IDLER, TENSION, FIXEDORCA III3 2 11PART NO.1 - 620-405 12 BEARING, IDLER 020-100 24 SET SCREW, 10-32 X 3/16 LG - 31 - 710-110 42 WASHER, LOCK, 3/8 - 52 - - 6DRAWN BY: SCALE: SIZE:P.R. 1:1 CDwg:ITEM001-005DCBAGBC Pro - Tech Parts ManualO IV : 001 - 005 Idler, fixed

N© GBC Pro - Tech April 1999 Page 9 - 28FG3218451ENOTE:REPLACE SUPPLIEDBOLTSWITH ITEM 20TIGHTEN -11- ONTO -15- UNTIL ALL OF -9- ISPILOTED ON -14-. THE -13- AND -14- MUSTROTATE FREELY TOGETHER ON -15-.BLUE LOCTITE -11- TO -15-.1776119128E3270300625911122101395066794044294AJ2/15/ HAJ 9912/16/ H97 M10-29- S96RAS9-20-J.S 956-13- .P.R9-21- .P.R5-17- .REVISIOG19GGFGREQ'D DESCRIPTIONPART NO. ITEM1 ARM, SLITTER 740-006 11 COLLAR, INFEED SLITTER 740-052 21 SCREW, THUMB 505-010 31 SPRING, TENSION 089-150 41 ROLL PIN, 1/8 X 1/2 LG 095-100 51 DOWEL PIN, 3/16 X 1/2 LG 095-140 61 ROLL PIN, 3/32 X 5/8 LG 095-120 72 WASHER, CONCAVE 740-007 81 BEARING, THRUST, 5/16 X 5/8 032-003 9- - - 101 NUT, NYLOCK, 8-32 - 112 WASHER, THRUST, 5/16 X 5/8 032-004 121 BLADE, SLITTER, CIRCULAR 475-001 131 FLANGED BUSHING, STEEL 040-037 141 STRIP, 3/16 X 3/4 050-032 151 WASHER, THRUST, 3/16 X 1/2 032-005 161 LABEL, WARNING 450-012 171 RIVET, FLTHEAD, 1/8 X 1/4 X 1/4 LG - 182 O-RING 480-030 192 SHCS,STAINLESS STEEL 5/16-24 X 3/4 - 2013FEDCBA14GREASE I.D. WITHBEARING GREASELIKE DOW 44.1615Pro-Tech EngineeringFThis print is the property of PRO-TECH ENGR. The information thereon is remitted inconfidence.UNLESS OTHERWISETOLERANCSPECIFEDEDIM.2117 N. Stoughton Rd. Madison, WisconsinTOLSHOW ASFINISPhone (608) 246-8844 53704 Fax (608) 246-.NTO H8645X/TITLEP 1/BEX 64: SLITTER,12X P5. .050O2, INPUT O3,X. PX .020O1SPX.X P ANGLEDATEDRAWNDWG DwgX .010:BY:SCALE::SP 05-16-CX.XX P1DP.R.X .005941001-122GBC Pro - Tech Parts ManualO IV : 001 - 122 Infeed Slitter

© GBC Pro - Tech April 1999 Page 9 - 29DCBA4GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TOMATERIAL DISCLOSED ON THIS THE DRAWING. IT IS ISSUED INFOR ENGINEERING INFORMATION CONFIDENCE ONLY AND SHALL NOT BECOPIED OR DISCLOSED REPRODUCED,IN WHOLE OR IN PART, OR USEDFORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4PROPRIETARYC33REQ'D-1231/1ASSEMBLY2DESCRIPTION1 22REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP1DTITLE:PART NO.2 BEARING, IDLER 020-100 11 TUBE, SLITTER, PVC 490-288 21 IDLER, 2 X 64", CHROME 620-405 3Pro-Tech EngineeringIDLER, SLITTERORCA II, ORCA IIIDATE: DRAWN BY: DWG SCALE:5-23-94 P.R. B132117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:11001-123ITEMDCBAGBC Pro - Tech Parts ManualO IV : 001 - 123 Idler Assembly, Slitter

© GBC Pro - Tech April 1999 Page 9 - 30REQ'D DESCRIPTIONPART NO. ITEM2 BEARING, IDLER 020-100 11 IDLER, 2 X 64", CHROME 620-405 2REVISIONThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P.050P.020P.010P.005FINISHTO BE125ANGLESP1D2 1TITLE:DATE: DRAWN BY: DWG SCALE:1-10-95 K.L. A1Pro-Tech EngineeringASSY,IDLERORCA II, ORCA III2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645Dwg:001-226GBC Pro - Tech Parts ManualO IV : 001 - 226 Idler Assembly, Removable

© GBC Pro - Tech April 1999 Page 9 - 31PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC132REQ'D1 BOLT, STANDOFF, REMOVABLE IDLER 645-009 11 STANDOFF, IDLER, HEX 755-033 21 SPRING, COMPRESSION 089-140 31 NUT, NYLOCK, 1/2-13 - 4REVISIONSHEETDIM. ASSHOWNX/XX.X.XX.XXX.XXX1 OF 1P 1/64P .050P .020P .010P .0051254UNLESS OTHERWISE SPECIFIEDTOLERANCETOL.DESCRIPTIONFINISHTO BEANGLESP 1DTITLE:DATE:RELEASENO.5-31-95DRAWN BY:RPRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSY, STANDOFF, REMOVABLEIDLERSCALE:PART NO.SIZE:P.R. 1:1 ADwg:ITEM001-305GBC Pro - Tech Parts ManualO IV : 001 - 305 Standoff, Removable Idler

© GBC Pro - Tech April 1999 Page 9 - 3211Solder21SolderREQ'D DESCRIPTIONPART NO. ITEM2 Connector ring 215-006 11 METAL-OXIDE VARISTOR 185-006 22 SHRINK TUBE, 1/8 DIA. BY 1.0" 180-425 31 SHRINK TUBE, 0.5" DIA. BY 0.85" 180-450 4REVISIONApply a heat shrink tube after solderingThis print is the property of PRO-TECH ENGR. The information thereon is remitted in confidence.UNLESS OTHERWISE SPECIFEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:Pro-Tech Engineering2117 N. Stoughton Rd. Madison, Wisconsin 53704Phone (608) 246-8844 Fax (608) 246-8645ASSY. MOV FOR O-III SSR, F 60DATE: DRAWN BY: DWG SCALE:3-26-96 HZ A134Dwg:001-342GBC Pro - Tech Parts ManualO IV : 001 - 342 M.O.V.

© GBC Pro - Tech April 1999 Page 9 - 33DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH41C236433851314122REQ'D2DESCRIPTION1 MANIFOLD, 2 STATION, MAC VALVE 350-160 12 SOLENOID, SINGLE, MAC VALVE 350-162 24 MALE ELBOW, SMC # KQL07-36S 330-312 34 MALE CONNECTOR, SMC # KQH07-34S 330-314 41 PLUG-IN "Y", SMC # KQU07-99 330-316 51 MUFFLER, ARROW, 3/8" NPT 330-285 61 PLUG, 3/8 " NPT 330-287 74 MALE ELBOW,SMC,KQL07-99 330-300 82716MS4-1-97REVISIONA144 212SHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .00515 1 3FINISHTO BE125ANGLESP 1DTITLE:DATE: 12-2-96RELEASE1021NO.DRAWN BY:R7SCALE:1PART NO.PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY, VALVE, CONTROLORCA IVTFB 1/11SIZE:B5Dwg:ITEM001-420DCBAGBC Pro - Tech Parts ManualO IV : 001 - 420 Valve Control, Main & Pull

SHEET 1667 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASTOL.SHOWNFINISHTO BEX/X P 1/64X.X.XX.XXX.XXXP .050P .020P .010P .005125ANGLESP 1DTITLE:DATE:RELEASENO.8-22-9716674151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DRAWN BY:RSCALE:SIZE:Dwg:© GBC Pro - Tech April 1999 Page 9 - 34DCBA87654321PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC1 5 3524REQ'DDESCRIPTIONPART NO. ITEM1 PANEL,MOTOR CONTROLLER 670-031 11 MOTOR CONTROLLER 220-105 21 FILTER,LINE 185-032 31 SIGNAL ISOLATOR BOARD 220-104 46 SHCS,10-32 X 1/2 - 54 BHCS,#6-32 X 5/8 - 64 SHCS,1/4-20 X 1/2 - 7BJTA 6-1-98 3120REVISIONPRO-TECHASSEMBLY,MOTOR CONTROLLERORCA 48 7 6 5 4 32 176RAS 1:1 D001-459DCBAGBC Pro - Tech Parts ManualO IV : 001 - 459 Motor Controller

+-REDYELLOW© GBC Pro - Tech April 1999 Page 9 - 35DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH142021CX25X23X21X17X1524VDCX3324VDC24VDC24VDCX3X1X7X5X13X11X31X27ES3ES2ES5ES4RSA14X16X1424VDCX37X36LS4LS3LS3LS2LS2LS1LS124VDCX35X3424VDC24VDC24VDC5 EA CONNECTED SET24VDC24VDC24VDC24VDC0VDC0VDC0VDC0VDC0VDCX12X10X6X4X2X0X32X30X26X24X22X20X45X44X43X42X41X40X47X46RSES6ES5ES4ES3ES2ES1102223247185C2 EACONNECTEDPAIRC7A1 Y1 Y224V 24V 24V 24V 24V X1 X3 X5 X7 X11 X13 X15 X17 X21 X23 X25 X27 X31 X33 24V 24V LS1 LS2 LS3 LS4 24V24V 24V FS1 FS2 ES1 ES2 ES3 ES4 ES5 ES6 RS0V0V0V0V0VX0X2X4X6X10X12X14X16X20X22X24X26X30X32X34X35LS1LS2LS3LS4X37X40X41X42X43X44X45X46FS1ES1ES2ES3ES4ES5ES6RSCrouzetKNA23RS ES6 ES5 ES4 ES3 ES2 ES1 FS2 FS1 X46 X45 X44 X43 X42 X41 X40 X37 LS4 LS3 LS2 LS1 X35 X34 X32 X30 X26 X24 X22 X20 X16 X14 X12 X10 X6 X4 X2 X0 0V 0V 0V 0V 0V32313RS ES6 ES5 ES4 ES3 ES2 ES1 FS2 FS1 24V 24V X44 X43 X42 X41 X40 24V LS4 LS3 LS2 LS1 24V 24V X33 X32 X31 X27 X25 X23 X21 X17 X15 X13 X11 X7 X5 X3 X1 24V 24V 24V 24V 24V24 A214631121427 5 EA CONNECTED SET9101112137C0VDC0VDC0VDC0VDC0VDCX0X2X4X6X10X12X14X16X20X22X24X26X30X32X34X35LS1LS2LS3LS4X37X40X41X42X43X44X45X46FS1FS2ES1ES2ES3ES4ES5ES6RS24VDC24VDC24VDC24VDC24VDCX1X3X5X7X11X13X15X17X21X23X25X27X31X32X3324VDC24VDCLS1LS2LS3LS424VDCX40X41X42X43X4424VDC24VDCFS1FS2ES1ES2ES3ES4ES5ES6RS5 EA CONNECTED SETC28141517192CCBBBBBBBBBBBBBBBAAAREQ'D37 TERMINAL BLOCK,DOUBLE LEVEL, MBKKB2,5 217-015 16 TERM BLK,DBL LEVEL,BRIDGE,MBKKB2,5-PV 217-016 21 SPACER PLATE,TERM BLOCK,D-MBKKB 2,5 217-017 31 END,COVER,TERM BLOCK,DP-MBKKB 2,5 217-018 48 INSERTION BRIDGE, 2-POS,EB5-2 217-036 51 DIN RAIL,16.75 217-206 6* BRIDGE BAR,FIXED,10 POS,FBRNI 10-5 N 217-021 723 MARKER, RED/BLACK, 24VDC 217-050 811 MARKER, BLUE/BLACK, 0VDC 217-051 92 MARKER,10 POSITIONS 217-052 101 MARKER,10 POSITIONS 217-053 111 MARKER,10 POSITIONS 217-054 121 MARKER,10 POSITIONS 217-055 132 MARKER,10 POSITIONS 217-056 141 MARKER,10 POSITIONS 217-084 152 TERMINAL,GROUNDING,USLKG 2,5 217-025 16AJH3/17/99 3285RAS10-13-97 2974RAS8-15-97 2914REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:14151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 8-6-97 DRAWN BY: SCALE:RELEASERAS 1:1NO.1560PART NO.1 MARKER,10 POSITION 217-065 171 SAFETY MODULE,KNA2 207-189 181 MARKER,10 POSITIONS 217-076 191 MARKER,10 POSITIONS 217-077 201 MARKER,10 POSITIONS 217-078 211 MARKER,10 POSITIONS 217-079 221 MARKER,10 POSITIONS 217-080 231 MARKER,10 POSITIONS 217-081 24* BRIDGE BARS ARE PURCHASED IN INTERCONNECTED 10-SETS.CUT AND POSITION THE INTERCONNECTED-COUNTS AS SHOWN INTHE VIEW(S).MAKE SHOWN GRIDGE BAR SETS FROM FLOOR STOCK.77 EA CONNECTED SET, EXCEPT NOTE THREEDELETED SCREWSCBAPRO-TECHRASSEMBLY,TERM BLOCK,INPUTORCA 4CSIZE:BDwg:ITEM001-464DCBAGBC Pro - Tech Parts ManualO IV : 001 - 464 Terminal Block, Input

R© GBC Pro - Tech April 1999 Page 9 - 36DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHC71022230VDC0VDC0VDC0VDC0VDC0VDC0VDCY1Y3Y5Y70VDC0VDC0VDC0VDC0VDC0VDCY20Y21Y22Y23Y24Y25Y26Y270VDC0VDC0VDC0VDCY40Y41Y42Y430VDC0VDC0VDC0VDC0VDC0VDCY35Y34Y4724VDC24VDC24VDC24VDC24VDC24VDC24VDCY0Y2Y4Y6Y10Y11Y12Y13Y15Y16Y14Y175VDCY20Y21Y22Y23Y24Y26Y25Y27Y30Y31Y32Y33Y36Y37Y40Y41Y42Y43Y44Y45Y45Y46+CH1+CH2232 EA CONNECTED PAIR124C687 EA CONNECTED SET24102762549266327C812 12 1212 12 1212 1214 14 14 0V 0V 0V 0V 0V 0V 0V Y1 Y3 Y5 Y7 0V 0V 0V 0V 0V 14 14 14 0V Y20 Y21 Y22 Y23 Y24 Y25 Y26 Y27 0V 0V 0V 0V 14 14 Y40 Y41 Y42 Y43 0V 0V 0V 0V -CH1 -CH211 11 1111 11 1111 1124V+V0+V1+V2+V3+V5+V6Y0Y2Y4Y6Y10Y11Y12Y13Y15+V4Y20Y21Y22Y23Y24Y25Y26Y27Y30Y31Y32Y33Y36Y37Y40Y41Y42Y43Y44Y45Y45Y46+CH1 +CH23+CH2 +CH1 Y46 Y45 Y45 Y44 Y43 Y42 Y41 Y40Y33 Y32 Y31 Y30 Y27 Y26 Y25 Y24 Y23 Y22 Y21 Y20 +V4Y15 Y13 Y12 Y11 Y10 Y6 Y4 Y2 Y0 +V6 +V5 +V3 +V2 +V1 +V0 24V3-CH2 -CH1 0V 0V 0V 0V0V 0V 0V 0V Y27 Y26 Y25 Y24 Y23 Y22 Y21 Y20 0V0V 0V 0V 0V 0V Y7 Y5 Y3 Y1 0V 0V 0V 0V 0V 0V 0V5491121211139394161718198C8 6 EA CONNECTED SET141524VDC0VDC+V00VDC+V10VDC+V20VDC+V30VDC+V50VDC+V60VDCY0Y1Y2Y3Y4Y5Y6Y7Y100VDCY110VDCY120VDCY130VDCY150VDC20+V40VDCY20Y20Y21Y21Y22Y22Y23Y23Y24Y24Y25Y25Y26Y26Y27Y27Y300VDCY310VDCY320VDCY330VDCY4021Y41Y42Y43Y440VDCY450VDCY450VDCY460VDC+CH1-CH1+CH2-CH219C6 EA CONNECTED SET228CCBBAAAAAAAAAAAAAAABREQ'DDESCRIPTION1PART NO.27 TERMINAL BLOCK,DOUBLE LEVEL 217-015 112 TERMINAL BLOCK,DOUBLE LEVEL,BRIDGE 217-016 23 COVER,END,TERMINAL BLOCK 217-017 33 COVER,END,TERMINAL BLOCK 217-018 41 END BRACKET,UNIVERSAL 217-019 58 RELAY,2VDC,NO/NC 207-009 61 DIN RAIL 217-205 7* BRIDGE BAR,FIXED,10 POS 217-021 81 JUMPER,PLUG-IN,BLUE 217-023 91 JUMPER,PLUG-IN,GRAY 217-024 101 JUMPER, 2-POS 217-036 111 TERMINAL,GROUND 217-025 128 MARKER, RED/BLACK, 24 VDC 217-050 1444 MARKER, BLUE BLACK, 0 VDC 217-051 151 MARKER,10 POSITIONS 217-058 161 MARKER,10 POSITIONS 217-059 171 MARKER,10 POSITIONS 217-060 181 MARKER,10 POSITIONS 217-061 191 MARKER,10 POSITIONS 217-062 201 MARKER,10 POSITIONS 217-064 211 MARKER,10 POSITIONS 217-070 221 MARKER,10 POSITIONS 217-071 231 MARKER,10 POSITIONS 217-072 241 MARKER,10 POSITIONS 217-073 251 MARKER,10 POSITIONS 217-074 261 MARKER,10 POSITIONS 217-075 27* 217-021 BRIDGE BARS ARE PURCHASED ININTERCONNECTED 10-SETS. CUT AND POSITION THEINTERCONNECTED-COUNTS AS SHOWN IN THE VIEW(S).MAKE SHOWN BRIDGE BAR SETS FROM FLOOR STOCK.10 EA CONNECTED SET,EXCEPT NOTE SKIPPED 4SCREWSC8 4 EA CONNECTED SETAJH3/18/99 3285DJG4-3-98 3088RAS10-13-97 2974CBAREVISIONSHEETUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXX1561 OF 1TOL.P 1/64P .050P .020P .010P .005FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.8-7-97PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,TERMINAL,OUTPUTORCA 41561DRAWN BY: SCALE: SIZE:RAS 1:1 CDwg:ITEM13001-465DCBAGBC Pro - Tech Parts ManualO IV : 001 -465 Terminal Block, Output

© GBC Pro - Tech April 1999 Page 9 - 37DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH4X33X7X6X5X4X3X2X1S20V0V0VY37Y36+CH1Y0Y1C10 1010108S20 V0 V0 V0 V0 V0 V0 V0 V0 VY37Y36+CH1Y0Y1Y2Y3Y4Y5Y624V+CH2BOTHSIDES0V0V0VY29 90V0V0VY3Y4Y5Y624VY37Y36+CH1Y0Y1Y2Y3Y4Y5Y624V33S20V0V0V0V0V0V0V0V0V13143129 EA CONNECTEDSET BY37Y36+CH1Y0Y1Y2Y3Y4Y5Y624V1245S20 V0 V0 V0 V0 V0 V0 V0 V0 V67BAAAAAAAAAAAB2REQ'DDESCRIPTIONPART NO. ITEM10 TERMINAL BLOCK,THREE LEVEL,SENSOR 217-026 12 END BRACKET,UNIVERSAL 217-019 21 DIN RAIL,6-7/8 217-037 31 BRIDGE, INSERTION,RED 217-027 41 BRIDGE,INSERTION,BLUE 217-028 52 MARKER, RED / BLACK, 24 VDC 217-050 618 MARKER, BLUE/BLACK, 0 VDC 217-051 72 MARKER,10 POSITIONS 217-063 81 MARKER,10 POSITIONS 217-085 91 MARKER,10 POSITIONS 217-086 1011 TERM BLK,DBL LEVEL,MBKKB2.5 217-015 11* BRIDGE BAR,FIXED,10 POS,FBRNI 10-5 N 217-021 1221 COVER,END,TERM BLOCK,D-MBKKB 2.5 217-017 131 END COVER,TERM BLOCK,DP-MBKKB 2.5 217-018 14* BRIDGE BARS ARE PURCHASED IN INTERCONNECTED10-SETS. CUT AND POSITION THE INTERCONNECTED-COUNTSAS SHOWN IN THE VIEW(S).MAKE SHOWN BRIDGE BAR SET FROM FLOOR STOCK.AJH3/18/99 3285RAS10-13-97 2974REVISIONBASHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:DATE: 8-6-97 DRAWN BY: SCALE:RELEASERAS 1:1NO.1562R1PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,TERM BLOCK,SENSORORCA 41SIZE:BDwg:001-466DCBAGBC Pro - Tech Parts ManualO IV : 001 - 466 Terminal Block, Sensors

GBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCR© GBC Pro - Tech April 1999 Page 9 - 38DCBA1PROPRIETARY64 3 242A1 A2 A1 A2 A1 A2CL02D3 CL02D3 CL02D312JUMPER CONFIGURATIONNORTH AMERICANL3CL3CL3CL3CL3CL3CL3CL3C4L2CL2CL2CL2CL2CL2CL2CL2C866DEUROPEANJUMPER CONFIGURATION13NL1CL1CL1CL1C7553 EA CONNECTED SETNL1CL1CL1CL1C5533NNN48N44D4REQ'D1 DIN RAIL 217-207 13 CONTACTOR,GE CL02D310T 210-003 222 TERMINAL BLOCK,10.2mm,70A,UK 10 N 217-029 41 TERMINAL BLOCK,GROUND,USLKG 10 217-014 51 END BRACKET,UNIVERSAL,E/UK-1 217-019 64 SEPARATING PLATE,TS-K 217-032 7* BRIDGE BAR,FIXED,10 POS,FBI 10 10 217-021 8REVISIONSHEET 1661 OF 1UNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION3 2 14442 EA CONNECTED PAIR(3) PLACES44484D4DCABBBBAB3000RAS12/3/97AFINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.8-18-97PRO-TECH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ASSEMBLY,TERMINAL,POWERORCA 416611PART NO.3 DIODE, RECTIFIER 185-005 12B 1 ASSEMBLY,MARKER 001-516 13* BRIDGE BARS ARE PURCHASED IN INTERCONNECTED10-SETS. CUT AND POSITION THEDINTERCONNECTED-COUNTS AS SHOWN IN THE VIEW(S).MAKE SHOWN BRIDGE BAR SETS FROM FLOOR STOCK.L3E2328531363104AJH3/18/99RAS6-16-98RAS4-30-981 18 EA CONNECTED SETL3E211DCB1111811D11D8 4 EA CONNECTED SET7 EA CONNECTED SET88D52 EA CONNECTED PAIR(5) PLACESD3 EA CONNECTED SETDRAWN BY: SCALE: SIZE:RAS 1:1 CDwg:ITEM391011001-468DCBAGBC Pro - Tech Parts ManualO IV : 001 - 468 Termianl Block, Power

© GBC Pro - Tech April 1999 Page 9 - 39PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECH6CBOTH SIDES10444131312124510REQ'D DESCRIPTIONPART NO. ITEM1 DIN RAIL 217-003 12 GROUND TERMINAL,USLKG2.5 217-025 27 TERMINAL,UK2.5N 217-038 32 SEPARATION PLATE 217-039 41 BRIDGE BAR,FIXED (CUT) 217-040 52 ASSEMBLY,LABEL 217-082 63REVISIONSHEET 1 OFDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .00521UNLESS OTHERWISE SPECIFIEDTOLERANCE1FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 10-16-97 DRAWN BY: SCALE:RELEASENO.1776RAS 1:1RPRO-TECHASSEMBLY,TERM,COOLING FANELEC SIDE,ORCA 4SIZE:ADwg:001-474GBC Pro - Tech Parts ManualO IV : 001 - 474 Terminal Block, Fans, Control

© GBC Pro - Tech April 1999 Page 9 - 40PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHDISCARD FIRSTLABEL6CBOTH SIDES44413131212101045REQ'D DESCRIPTIONPART NO. ITEM1 DIN RAIL 217-003 12 GROUND TERMINAL,USLKG2.5 217-025 26 TERMINAL,UK2.5N 217-038 32 SEPARATION PLATE 217-039 41 BRIDGE BAR,FIXED (CUT) 217-040 52 ASSEMBLY,LABEL 217-082 63REVISIONSHEET 1 OFDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .00521UNLESS OTHERWISE SPECIFIEDTOLERANCE1FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 10-16-97 DRAWN BY: SCALE:RELEASENO.1775RAS 1:1RPRO-TECHASSEMBLY,TERM,COOLING FANDRV SIDE,ORCA 4SIZE:ADwg:001-475GBC Pro - Tech Parts ManualO IV : 001 - 475 Terminal Block, Fans, Drive

© GBC Pro - Tech April 1999 Page 9 - 41PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCBAAAAREQ'DDESCRIPTIONPART NO.1 TOWEL,WHITE 475-950 11 ZIPPY KNIFE 475-620 21 ALLEN WRENCH SET 475-230 34 LEVELING PAD 470-101 43 FUSE, 6 AMP 186-017 51 TAPE MEASURE 475-100 61 RUBBER CEMENT PICK-UP 930320 71 STRAIN RELIEF 175-201 81 BOX ACCESSORY 475-010 91 MANUAL, OPERATORS 930-009 104 ASSY, SLITTER 001-122 112 - 475-210 122 SPACER, UNWIND, WEB 755-059 133172BJT9-3-98B3067AJH3/5/98AREVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXTOL.P 1/64P .050P .020P .010X.XXX P .0051FINISHTO BE125ANGLESP 1DTITLE:DATE:RELEASENO.4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645ACCESSORY KITORCA IV10-17-971790DRAWN BY:RPRO-TECHSCALE:SIZE:Dwg:ITEMMAA 1/1 A 001-480GBC Pro - Tech Parts ManualO IV : 001 - 480 Accessory Pack

© GBC Pro - Tech April 1999 Page 9 - 42PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHCREQ'DNOTES:1. SOLDERING NOT TO EXCEED LIMITS OF SOLDERINGTEMPERATURE AND TIME AS SPECIFIED IN ULCOMPONENTS BOOK FOR BOARD MANUFACTURER.1 PART LIST SPE. DOC 001-501.XLS -1 TEST AND CALIB.DOC 820-061.DOC -1 SCHEMATIC 810-038 -1 PCB, ENCODER 671-020 -REVISIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX/XX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .005DESCRIPTION1FINISHTO BE125ANGLESP 1DTITLE:4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645DATE: 2-11-98 DRAWN BY: SCALE:RELEASENO.1921HZ 1/1RPART NO.PRO-TECHASSY, PCB, ENCODER, ORCA 4-SIZE:ADwg:ITEM001-501GBC Pro - Tech Parts ManualO IV : 001 - 501 Encoder

© GBC Pro - Tech April 1999 Page 9 - 43DCBA4PROPRIETARYGBC PRO-TECH CLAIMS PROPRIETARY RIGHTS TO THEMATERIAL DISCLOSED ON THIS DRAWING. IT IS ISSUED IN CONFIDENCEFOR ENGINEERING INFORMATION ONLY AND SHALL NOT BE REPRODUCED,COPIED OR DISCLOSED IN WHOLE OR IN PART, OR USED FORMANUFACTURE OR FOR ANY OTHER PURPOSE WITHOUT WRITTENPERMISSION FROM GBC PRO-TECHNOTES:1. FINISH: POWDER COAT, TIGER DRYLAC #RAL-7035GRAY, MATTE SMOOTH TEXTURE.C4ITEM-1C3ITEM-2 ITEM-3X/X3REQ'D42DESCRIPTION3 41 2228552693MS6-27-97MS3-18-97REVISIONBAC 3307REV ECN BY DESCRIPTIONSHEET 1 OFUNLESS OTHERWISE SPECIFIEDTOLERANCEDIM. ASSHOWNX.X.XX.XXX.XXXTOL.P 1/64P .050P .020P .010P .0051FINISHTO BE125ANGLESP 1DTITLE:1PART NO.1 1.500 DIA. CRS 11 1.500 DIA CRS 21 STL. TUBE,DOM WELDED,1.75 DIA X .156 WALL 32 TORRINGTON,IR-2424 028-005 4DJG ADDED OVER PAINT DIAMETER TOLERANCE OF 1.765/1.755, CHANGED4/12/99 FINISH TO TIGER DRYLACK #RAL-7035 GRAY, MATTE SMOOTH4151 Anderson Road, DeForest, Wisconsin 53532Phone (608) 246-8844 Fax (608) 246-8645SHAFT,COREORCA IVDATE: 11-13-97 DRAWN BY: SCALE:RELEASE1079 MS 1/1NO.R PRO-TECHSIZE:CDwg:ITEM001-530DCBAGBC Pro - Tech Parts ManualO IV : 001 - 530 Unwind Shaft

GBC Pro - Tech Parts ManualOrca 80Illustrated Parts Diagrams( 000 - 026 )© GBC Pro - Tech April 1999 Page 10 - 1

GBC Pro - Tech Parts ManualWires ( unit of measurement = feet )270 - 001 Wire 14 ga Black270 - 002 Wire 14 ga Light blue270 - 003 Wire 22 ga Light blue270 - 004 Wire 10 ga Red270 - 005 Wire 18 ga Black270 - 006 Wire 8 ga Light blue270 - 007 Wire 22 ga 3 conductor270 - 008 Wire 12 ga Dark blue270 - 009 Wire 14 ga Red, UL3071 200C270 - 010 Wire 8 ga Black270 - 011 Wire 22 ga Red270 - 012 Wire 22 ga Dark blue270 - 013 Wire 14 ga Red270 - 014 Wire 14 ga Brown270 - 015 Wire 16 ga Red270 - 016 Wire 22 ga Gray270 - 017 Wire 10 ga Light blue270 - 018 Wire 14 ga Dark blue270 - 019 Wire 20 ga270 - 020 Wire 12 ga Light blue270 - 021 Wire 16 ga White270 - 022 Wire 16 ga Red, UL3071 / SF-2 200C270 - 023 Wire 12 ga Red, UL3074 200C270 - 024 Wire 12 ga Brown270 - 025 Wire 12 ga Black270 - 026 Wire 16 ga Light blue270 - 027 Wire 16 ga Dark blue270 - 028 Wire 10 ga Brown270 - 029 Wire 14 ga Braided ground270 - 030 Wire 12 ga Red270 - 050 Cable 16 / 3270 - 100 Cable 12 / 3270 - 105 Cable 10 / 3270 - 109 Cable 18 / 2270 - 110 Cable 18 / 3270 - 115 Cable 18 / 5270 - 120 Cable 14 / 3270 - 125 Cable 8 / 3Universal Parts list© GBC Pro - Tech April 1999 Page 11 - 1

GBC Pro - Tech Parts ManualUniversal Parts list270 - 130 Wire Thermo sensors270 - 135 Cord White270 - 136 Wire 16 ga GreenSpiral Wrap ( unit of measurement = feet )180 - 400 Spiral wrap 1/4” Natural color180 - 410 Spiral wrap 3/8” Natural color180 - 420 Spiral wrap 1/2” Natural colorHeat Shrink and Insulating Sleeves ( unit of measurement = inches )180 - 425 Heat shrink 1/8” Black180 - 430 Heat shrink 1/4” Black180 - 440 Heat shrink 3/16” Black180 - 450 Heat shrink 1/2” Black180 - 006 Insulating sleeve 5/8” Natural180 - 510 Insulating sleeve 2” NaturalPneumatic Tubing ( unit of measurement = feet )360 - 002 Tubing 1/4” Black - Polyethylene ( Cuurent )360 - 003 Tubing 1/8” White360 - 005 Tubing 1/4” OD x .17” ID Black360 - 100 Tubing 1/16” Light blue360 - 120 Tubing 1/4” Dark blue - PolyethyleneRing Connectors ( Unit of measurement = each )215 - 021 250 Ring connector 10 - 12 ga215 - 056 #10Ring connector 10 - 12 ga215 - 058 #6 Ring connector 14 - 16 gaFork Connectors ( unit of measurement = each )215 - 011 #6 Fork connector 14 - 16 ga215 - 016 #6 Fork connector 10 - 12 ga215 - 081 #6 Fork connector 18 - 22 ga© GBC Pro - Tech April 1999 Page 11 - 2

GBC Pro - Tech Parts ManualUniversal Parts listFemale Connectors ( unit of measurement = each )215 - 031 250 Female spade connector 18 - 22 ga215 - 041 187 Female spade connector 14 - 16 ga215 - 046 187 Female spade connector 18 - 22 ga215 - 066 250 Female spade connector 10 - 12 ga215 - 076 250 Female spade connector 14 - 16 ga215 - 086 110 Female spade connector 18 - 22 gaMale Connectors ( unit of measurement = each )215 - 026 250 Male spade connector 18 - 22 ga215 - 036 187 Male spade connector 14 - 16 ga215 - 051 187 Male spade connector 18 - 22 ga215 - 061 250 Male spade connector 14 - 16 gaMiscellaneous Items ( unit of measurement = each )175 - 004 Cable tie bases with adhesive UL approved175 - 008 Pan pole Clear plastic180 - 300 Wire tie 4 13/16” clear180 - 310 Wire tie 7-1/2” clear© GBC Pro - Tech April 1999 Page 11 - 3