Shakers

Shakers | AccessoriesVX 11.1VX 11.3VX 1VX 7Bore holes (number) 70Hole Ø10 mmBore holes (number) 32Hole Ø16 mmDimensions (W x D x H)Weight130 x 135 x 40 mm160 gDimensions (W x D x H)Weight410 x 210 x 40 mm740 g1Ident. No.0607200Ident. No.0953300Ident. No.3659000Ident. No.3659200VX 1 One-hand attachmentFor shaking single, non-fixed vessels of 1 – 250 ml.VX 7 Dish attachmentFor careful mixing of culture bottles, Petri dishes, etc.VX 11.1 Test tube insertAttachment for Eppendorf tubes or test tubes.VX 11.3 Test tube insertAttachment for test tubes.VX 2VX 8VX 11.2VX 11.4Dimensions (W x D x H)MaterialWeight140 x 145 x 115 mmmacrolon300 gDimensions (W x D x H)Clamping rangeMin. height of vesselWeight265 x 136 x 60 mm25 – 135 mm80 mm760 gBore holes (number) 41Hole Ø12 mmBore holes (number) 18Hole Ø20 mmIdent. No.0568900VX 2 Test tube attachmentFor up to 36 test tubes or centrifugal tubes witha diameter of 16 mm.Ident. No.0910400VX 8 Universal attachmentFor rapid and secure clamping, e.g. 2 Erlenmeyerflasks up to 500 ml.Ident. No.3659100VX 11.2 Test tube insertAttachment for test tubes.Ident. No.3659300VX 11.4 Test tube insertAttachment for test tubes.Ident. No.3375400VX 8.1 Clamping rollSpare for use with VX 8 universal attachment.VX 2EVX 111Dimensions (W x D x H)Weight210 x 210 x 65 mm790 gDimensions (W x D x H)220 x 230 x 95 mmCapacity 64Vessel Ø10 – 16 mmMin. height of vessel80 mmWeight670 gIdent. No.1618100Ident. No.3627700VX 2E “Eppendorf” attachmentFor intensive mixing of up to 64“microcentrifuge” tubes (1.5 ml).VX 11 Basic holderAttachment for test tube inserts.22 23