Samui Phangan Real Estate Magazine December-January

HOW TO ATTACH FLOOR JOISTS
In order to secure the joists to wooden frame, you
have two broad options. On one hand, you can drive
4´-5´ screws trough the rims in the joists, or, you can
use metal joist hangers.
We recommend you to support the joists with metal
hangers, but you can get the job done by inserting
screws trough the rim joists, as well (don’t forget to
drill pilot holes, before driving in the screws).
HOW TO BUILD SALA FLOOR
FRAME
Next, you have to install the rest of the 4×4 posts that
will support the top plate and roof, as in the image. If
you want to build a durable sala, we recommend you
to secure the posts to the floor joists, using 6” nails.
Smart tip: Work with great care and don’t forget to
plumb the posts before driving in the nails. In addition,
use a tape measure to place the posts symmetrically.
HOW TO BUILD A SALA DECKING
After you have built the frame of the floor and installed
the 4×4 wooden posts, you have to fasten the 2×4
or 2×6 decking. We recommend you to buy decking
boards designed for outside use, otherwise the floor
of the sala will be damaged by the moisture.
Smart tip: When installing the decking boards, place
a nail between the slats, as to get consistent gaps
between the boards.
HOW TO BUILD SALA FLOOR
As you can see in the image, we recommend you to
drill pilot holes before inserting the nails. If you use
screws, you can drive them in the boards without
pre-drilling, but you have to use appropriate decking
screws.
Smart tip: You should fasten each deck board with
two screws at both ends, to make sure they are
secured properly. Work with great care, as to obtain
a professional result.
Next issue we will look at building your sala roof and completing your sala ready for you to enjoy!
source: http://www.howtospecialist.com
samui phangan real estate 43