12.07.2015 Views

henderson storage systems - Wagner Die Supply

henderson storage systems - Wagner Die Supply

henderson storage systems - Wagner Die Supply

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Wagner</strong> <strong>Die</strong> <strong>Supply</strong> ®<strong>Die</strong>making & <strong>Die</strong>cutting Source and ResourceHenderson Storage SystemsPlaten & Bobst <strong>Die</strong> StorageHenderson Bobst & Platen <strong>Die</strong> Storage System’sadjustable racks allow for the safe, efficient <strong>storage</strong>of hundreds of dies, regardless of size and weight.By using an inverted “T” and double “L” design,Platen and Bobst dies are securely stored hangingon 2 pins. Position the beams based on your mostcommon sized dies, and you will maximize thenumber of dies stored on each rack.Both Platen and Bobst <strong>storage</strong> sections can becombined on a single rack, and a label locatorsystem makes die retrieval quickand easy.Platen die <strong>storage</strong> racks store up to 177 dies, andthe Bobst racks up to 90 dies. Standard units are12’ high (different frame heights are available), 10’long and 48” or 60” deep. 5,000 lbs. can becarried on the lower (5”) channel beams, 6’ fromthe floor. While the 2 upper (4”) channel beamscan each hold up to 2,500 lbs.Each <strong>storage</strong> system is designed for maximumsupport, constructed of heavy gauge steel andtriple-welded for superior strength and durability.They are easy to assemble using the heavy dutyhardware that’s provided with each unit.A close-up view of the “T” configurationof rack slides used on Platen <strong>storage</strong><strong>systems</strong>. <strong>Die</strong>s slide between the channelssupported by the two pins.The twin “L” configuration of the Bobst<strong>storage</strong> rack. Bobst dies slide into the rackbetween the twin “L’s” supported by thetwo pins.Continued next page...Standard Unit Sizes Platen T-Section Bobst Section Bobst Section12’H x 10’L x 48”DFor 5/8” - 3/4” die boardFor dies with Stripping UnitFor dies with Stripping Unitor12’H x 10’L x 60”DHolds 177 dies2” on centerHolds 90 dies4” on centerHolds 60 dies5-1/2” on center<strong>Die</strong> Holder Pins3/16” x 1-5/8”3/16” x 1-5/8”3/16” x 1-5/8”West2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651www.wagnerdiesupply.comMidwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-91243

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!