henderson storage systems - Wagner Die Supply

Wagner Die Supply ®Diemaking & Diecutting Source and ResourceHenderson Storage SystemsOriginal Rotary Die StorageHalf-HeightUnit adds onto OriginalUnitRotary cutting dies are stored easily andefficiently in the Original Henderson storagerack. Dies are nested for maximum die storage ina minimum of space, and are safely kept andsecurely centered with our exclusive “lip”slide design. Plus our die location system,using Henderson labels, makes retrievalfast and easy.Original Rotary Die Storage rack systems are80”high x 80” deep, with different widths toaccommodate different die diameters. Originalracks are also available in half-heights and halfdepth configurations (see chart below).Each Original Rotary Die Storage rack accommodatesup to 16 cutting dies in the sizes outlinedin the charts below. While only six common diesizes are shown, racks can be manufactured byour factory to fit any size die requirement.Henderson’s exclusive “lip”slide design keeps rotarycutting dies securely centered,preventing damage to thecutting and scoring knives.Numbered racks refer storeddies to customer files or jobsfor easy access.MachineCircumference66”50” *38”37-1/2”35”24”Wood I.D.Size (approx.)19-3/16”14”, 14-1/4”, 14-1/2”10-5/8”10-1/8”9-1/2”7”“Original” Unit80’’D x 80”HCapacity12 dies14 dies16 dies16 dies16 dies16 dies* Please specify wood I.D. on 50” Rotary.This 66” rack has more space between diesto accommodate taller rubber.Half Height Unit80’’D x 45”HCapacity6 dies7 dies8 dies8 dies8 dies8 diesCapacity66”cylinder 84”h x 80”d 12 diesHalf Depth Unit40’’D x 80”HCapacity12 dies14 dies16 dies16 dies16 dies16 diesSpacing6-1/4”West2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Die Transportation Cart for Original Rotary Racks features heavy-duty constructionand allows for the transfer of six 66” dies. The cart measures 48” long by54-1/2” high, and comes in a variety of widths to accommodate different diameters.Each cart has a 500 lb. load capacity and sturdy 3/4” plywood shelving at top andbottom so that smaller dies as well as other materials can be transported at the sametime. An “XL” cart is also available for 66” dies - 54-1/2” high x 80” deep andhas 6 wheels, 4 swivel and 2 stationary (XL-Cart not pictured).WAGNER ALSO HAS HENDERSON RACKS DESIGNED FOR DRO & EVOL DIES!Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651Midwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-9124www.wagnerdiesupply.com 1

Wagner Die Supply ®Diemaking & Diecutting Source and ResourceHenderson Storage SystemsDRO & EVOL Rotary Die StorageWagner can supply specialized Henderson StorageSystems for just about any type of die, including DROand EVOL rotary dies. These heavy-duty units are designedto be sturdy, durable and versatile. Transfer cartsare also available. Wagner also has a full line of DROPosilock Hoops (inset) in several sizes, available in bothsingle and double groove design.DRO Rotary Die StorageDRO Machine Rotary Die Storage Unit by Henderson.Cylinder66”Wood I.D.19-3/16”Rack Size132” Deep x 72” HighDie Capacity8 diesDRO Machine #1632DRO Posilock Hoop487 mm *Cylinder24”38”50”Other available DRO die storage units - upon request.Wood I.D.DRO Machine # DRO Posilock Hoop7”618177 mm*10-5/8”924270 mm*14-7/16”1232366 mm** Available in single or double groove design.EVOL Rotary Die StorageCylinder37-1/2”40”Die Storage Racks for EVOL Rotary DiesWood I.D.10-1/8”11-1/2”Rack Size84” Deep x 60” High100” Deep x 70” HighCapacity12 dies10 diesEVOL #84100**** with lock barWest2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651www.wagnerdiesupply.comMidwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-91242

Wagner Die Supply ®Diemaking & Diecutting Source and ResourceHenderson Storage SystemsPlaten & Bobst Die StorageHenderson Bobst & Platen Die Storage System’sadjustable racks allow for the safe, efficient storageof hundreds of dies, regardless of size and weight.By using an inverted “T” and double “L” design,Platen and Bobst dies are securely stored hangingon 2 pins. Position the beams based on your mostcommon sized dies, and you will maximize thenumber of dies stored on each rack.Both Platen and Bobst storage sections can becombined on a single rack, and a label locatorsystem makes die retrieval quickand easy.Platen die storage racks store up to 177 dies, andthe Bobst racks up to 90 dies. Standard units are12’ high (different frame heights are available), 10’long and 48” or 60” deep. 5,000 lbs. can becarried on the lower (5”) channel beams, 6’ fromthe floor. While the 2 upper (4”) channel beamscan each hold up to 2,500 lbs.Each storage system is designed for maximumsupport, constructed of heavy gauge steel andtriple-welded for superior strength and durability.They are easy to assemble using the heavy dutyhardware that’s provided with each unit.A close-up view of the “T” configurationof rack slides used on Platen storagesystems. Dies slide between the channelssupported by the two pins.The twin “L” configuration of the Bobststorage rack. Bobst dies slide into the rackbetween the twin “L’s” supported by thetwo pins.Continued next page...Standard Unit Sizes Platen T-Section Bobst Section Bobst Section12’H x 10’L x 48”DFor 5/8” - 3/4” die boardFor dies with Stripping UnitFor dies with Stripping Unitor12’H x 10’L x 60”DHolds 177 dies2” on centerHolds 90 dies4” on centerHolds 60 dies5-1/2” on centerDie Holder Pins3/16” x 1-5/8”3/16” x 1-5/8”3/16” x 1-5/8”West2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651www.wagnerdiesupply.comMidwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-91243

Wagner Die Supply ®Diemaking & Diecutting Source and ResourceHenderson Storage SystemsPlaten & Bobst Die Storage (continued)...Support Pins are available in3/16” diameter by 1-5/8” in length.To install support pins, drill 13/64”dia. holes 7/16” from top edge ofwood, on-center near the front andrear of the die. Pins are available inpacks of 100.Platen and Bobst Die Transportation Carts feature heavy dutyconstruction, and are 48” long, 62” high and 27” wide. They feature a 3/4”plywood top and bottom so that smaller dies and other materials can betransported at the same time. The Platen version can transport up to 11cutting dies, while the Bobst cart moves 3 sets of dies and stripping boards.Offset Litho Plate StorageEasiBlank Hangers allow completed EasiBlank toolingto be stored in Henderson Storage Systems for Platen dies,and transported in Henderson Transportation Carts forplaten dies. Hanging brackets include thumb screws foreasy and secure installation. Hangers come in sets of 2, onefor the front and one for the rear of the blanker.Henderson Litho Plate Storage systems provide an intelligent storagesolution, and protect your plates as well. The patented sliding “T”bar and “S” hooks make transporting plates to the press easy, andslide into the storage rack effortlessly. Each rack is 12’ high, 10’ longand 48” or 60” deep, allowing for the hanging of multiple plates oneach slide.Offset plates hang by “S” hooks (overall length: 2-7/8”). Hangingholes on “T” storage bar are factory-drilled.Henderson Litho Plate Storage System - U.S. Patent # 4,907,706Litho Plate Transportation Cart can transport up to 11multiple sets of litho plates. 48” long, 62” high and 27” wide, the cartuses the same “S” hook and sliding “T” bar design as the storage rack.West2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651www.wagnerdiesupply.comMidwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-91244

Wagner Die Supply ®Diemaking & Diecutting Source and ResourceHenderson Storage SystemsMounted & UnmountedPrinting Plate StorageHenderson Printing Plate Storage systems,for mounted and unmounted plates, canefficiently store approximately 560 plates ofvarying shapes and sizes. Constructed ofheavy gauge steel, these systems aredesigned to be tough and durable.Plates hang on “S” hooks with a special90° offset which can be ordered in twodifferent sizes to accommodate variousplates. Henderson labels, provide for aneasy to use retrieval system.Easy to assemble, Henderson Printing PlateStorage Systems are an effective storagesolution for mounted and unmountedprinting plates.Unit dimensions: 48”D x 12’L x 14’H.Mounted and unmountedprinting plates hang onspecial “S” hooks, which areavailable in two sizes:Small - 4-7/8” overall length,Large - 7-1/4” overall length.Hooks are available inquantities of 100 per size.Mounted & Unmounted Printing Plate Transportation Cart featuresheavy-duty construction and carries up to 48 plates. 52” long, 86” high and32” wide, the carts have a lower shelf to transport ink or other materials.West2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651www.wagnerdiesupply.comMidwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-91245

Wagner Die Supply ®Diemaking & Diecutting Source and ResourceHenderson Storage SystemsInk Storage UnitThe Henderson Ink Storage unit is specifically engineered tostore 5-gallon ink pails, safely and efficiently. This patented rackcan hold up to 108 5-gallon pails, and afford convenient accessfrom the front and back on all three levels.Our Ink Storage unit is designed to provide maximum support,constructed of the same quality, heavy-gauge steel used in ourDie and Plate Storage Systems.Easy to assemble, the unit comes with a turnbuckle tensioningdevice that keeps the shelves properly aligned and stable.Henderson Ink Storage SystemU.S. Patent # 4,742,925West2041 Elm Court • Ontario, CA 91761Toll-Free: (800) 423-4478Toll-Free Fax Orders: (866) 786-2437Southwest2532 Converse Street • Dallas, TX 75207Toll-Free: (800) 262-4695Toll-Free Fax Orders: (800) 446-6651www.wagnerdiesupply.comMidwest960 Industrial Drive • Elmhurst, IL 60126Toll-Free: (800) 334-7914Toll-Free Fax Orders: (800) 554-91246