No.557 Friction Tester, TR-2 - Xebex.jp

TOYO SEIKI SEISAKU-SHO, LTD.15-4, Takinogawa 5-chome, Kita-ku, Tokyo 114-8557, JapanPhone: 81-3-3916-8183 Fax: 81-3-3916-8173http://www.toyoseiki.co.jpNo.557 Friction Tester, TR-2 (Horizontal Plane Method)APPLICATIONThis instrument measures coefficient of friction of plastic film and paper, etc. The Coefficient of StaticFriction (µS) and Coefficient of Dynamic Friction (µD) are digitally displayed for direct reading. It isdesigned to conduct tests according to ISO 8295 and JIS K 7125 for plastic film and JIS P 8147 forpaper and can test samples as large as A4 size. Printer, Software and recorder, etc. are available asoption.FEATURES1. Because of microcomputer control system Coefficient of Static and Coefficient of Dynamic Frictionare digitally displayed immediately after conducting test.2. DC servo motor employed for driving the table assures stable table speed.3. Testing conditions can be easily set by ten-keys and set values remain stored in the memory, evenafter switching off power, until new values are input.4. Incorporates alarm function which does not allow you to set conditions outside the permissible range5. Equipped with safety function. You cannot conduct test unless are the conditions have been set.6. Emergency stop function is employed to protect the load cell in case of an overload.7. Large table area allows you to test samples as large as A4 size.8. RS232C allows you to print out test results and test conditions by printer. (*Option)9. By connection personal computer, operations such as setting of test conditions and drive of table,etc. can be conducted from the computer and test results can be displayed and stored. (*Option)*Printer and personal computer cannot be connected at the same time.

SPECIFICATIONSModelTR-2 (Horizontal Plane Method)Table speed 5-1500mm/min.Table stroke 1-200mmTable size 350 x 240mmLoad cell Select one from 10N(1kgf) , 20N(2kgf), 50N(5kgf)Load range: x1, x2, x5, x10, x20 (5 ranges)SledPlease select from below:1) 63x63mm, 200g…For Plastic Film & Sheet (JIS K 7125, ISO 8295)2) 63.5x63.5mm, 200g…For Plastic Film & Sheet (ASTM D 1894)3) 60x100mm, 1000g…For Paper & Cardboard (JIS P 8147)4) 63.5x63.5mm, 1360g…For Corrugated & Solid Fiberboard (ASTM D 4521)Indications 1) Coefficient of Friction (Static & Dynamic)2) Actual Load3) Actual Stroke4) Travel Speed5) Load Range6) Set Stroke7) Load Cell Capacity8) Weight of Sled9) Load Unit: N or kgfOptions 1) Recorder (X-T type 1 pen recorder)2) Mini Printer3) Data acquisition software for Windows ®Electrical AC100V, 1-P, 3A (Other voltages also possible)Testing method JIS K 7125, P 8147, ISO 8295, ASTM D1894Dimensions 70(W) x 35(D) x 32(H)cmNet Weight Approx. 34kg2