Acetic Acid Glacial - QGC

CG2http://jr.chemwatch.net/chemgold/msds.exe?fontsize=&print=Y&rCode=&prefname=...Page 10 of 1014/04/2009ACETIC ACID GLACIALHazard Alert Code:EXTREMEChemwatch Material Safety Data Sheet Revision No: 7 Chemwatch 2789-3Issue Date: 17-Mar-2009 CD 2009/1POISONS SCHEDULES6Section 15 - REGULATORY INFORMATIONREGULATIONSacetic acid glacial (CAS: 64- 19- 7) is found on the following regulatory lists;Australia Exposure StandardsAustralia Hazardous SubstancesAustralia High Volume Industrial Chemical List (HVICL)Australia Illicit Drug Reagents/Essential Chemicals - Category IIIAustralia Inventory of Chemical Substances (AICS)Australia National Pollutant InventoryAustralia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix E (Part 2)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix F (Part 3)Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 2Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 5Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 6CODEX General Standard for Food Additives (GSFA) - Additives Permitted for Use in Food in General, Unless OtherwiseSpecified, in Accordance with GMPGESAMP/EHS Composite List of Hazard Profiles - Hazard evaluation of substances transported by shipsIMO IBC Code Chapter 17: Summary of minimum requirementsIMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in BulkIMO Provisional Categorization of Liquid Substances - List 1: Pure or technically pure productsInternational Council of Chemical Associations (ICCA) - High Production Volume ListOECD Representative List of High Production Volume (HPV) ChemicalsSection 16 - OTHER INFORMATION» Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by theChemwatch Classification committee using available literature references.A list of reference resources used to assist the committee may be found at:www.chemwatch.net/references.» The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazardsare Risks in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current oravailable engineering controls must be considered.This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, aspermitted under the Copyright Act, no part may be reproduced by any process without written permission from CHEMWATCH.TEL (+61 3) 9572 4700.Issue Date: 17-Mar-2009Print Date:14-Apr-2009