FALL Protection 2007

The FundamentalsMKO1 ConnectorThis wide opening aluminium connector is usedin conjunction with a telescopic pole to installat a distance an anchorage point for the anchorage line.Easy to install, this connector suits most structures.RefOpening10 028 99 150mmJIRAF Telescopic PoleThis light-weight fibreglass telescopic pole is usedto install an anchorage point from a distanceRef.:Extended Length:10 029 79 9.4mCTelecom and UtilitiesCMF52 Rope GrabThis automatic and manual rope grab glides freely along the anchorage line withoutthe need for manual intervention. In the event of a fall the grab blocks onto the rope,thus arresting a fall in centimetres.The 30cm lanyard offers a more comfortable attachment to the front anchoragepoint on the harness.A wide range of ropegrabs is available.Refer to page 30for additional information.Ref.: 10 028 76 14mm/16mm10 076 18 10mm/12mm CAnchorage deviceStainless steelFixation point diameter: Ø 13mmWeight: 0.062 kgMaximum load before deformation: 300daNBreaking strength: >20kNConforms to EN 795 Classe A1Ref.: 10 029 96CAnchorage LineInstalled by means of the telescopic pole and anchorage connector. Supplied with connectorand counterweight, this anchorage line is suitable for use with a 10/12mm rope grab.Available in various lengthsRef.: 10 076 13C45