Products for Totally Integrated Automation and Micro ... - Siemens

© Siemens AG 2010Products forTotally Integrated Automationand Micro AutomationCatalog News ST 70 N • 2010SIMATICAnswers for industry.

© Siemens AG 2010Related CatalogsSIMATIC ST 70Products forTotally Integrated Automationand Micro AutomationE86060-K4670-A101-B2-7600SIMATIC NETIndustrial CommunicationIK PIE86060-K6710-A101-B6-7600SIMATIC NETIndustrial CommunicationIK PI NE86060-K6710-A121-A3-7600 (News)SIMATIC HMI ST 80Human MachineInterface SystemsE86060-K4680-A101-B6-7600SIMATIC Sensors ID 10Industrial IdentificationSystemsE86060-K8310-A101-A6-7600SITRAINTraining for Automation andIndustrial SolutionsITCE86060-K6850-A101-C1 (in German)Interactive Catalog CA 01Products forAutomation and DrivesE86060-D4001-A510-C8-7600Industry MallInformation and Ordering Platformin the Internet:www.siemens.com/industrymall

© Siemens AG 2010SIMATICProducts forTotally Integrated Automationand Micro AutomationCatalog News ST 70 N · 2010Introduction1LOGO! Logic module2SIMATIC S7-2003SIMATIC S7-12004The products and systemsdescribed in thiscatalog are manufactured/distributedunderapplication of a certifiedquality managementsystem in accordancewith DIN EN ISO 9001(Certified RegistrationNo.1323-QM). The certificateis recognized byall IQNet countries.SIMATIC S7-3005SIMATIC S7-4006SIMATIC Software7Supersedes:Catalog ST 70 N · April 2009Refer to the Industry Mall for current updatesof this catalog:www.siemens.com/industrymallThe products contained in this catalogcan also be found in the e-Catalog CA 01.Order No.:E86060-D4001-A510-C8-7600Please contact your local Siemens branch© Siemens AG 2010SIMATIC Programming devices8Embedded / PC-based Automation9Component Based Automation10Overview11SIMATIC Control systems12Supplementary components13Appendix14

1/2 Siemens ST 70 N · 2010© Siemens AG 2010

© Siemens AG 2010Answers for industry.Siemens Industry answers the challenges in themanufacturing and the process industry as well as inthe building automation business. Our drive and automationsolutions based on Totally Integrated Automation (TIA) andTotally Integrated Power (TIP) are employed in all kindsof industry. In the manufacturing and the process industry.In industrial as well as in functional buildings.Siemens offers automation, drive, andlow-voltage switching technology aswell as industrial software from standardproducts up to entire industry solutions.The industry software enables ourindustry customers to optimize the entirevalue chain – from product designand development through manufactureand sales up to after-sales service. Ourelectrical and mechanical componentsoffer integrated technologies for the entiredrive train – from couplings to gearunits, from motors to control and drivesolutions for all engineering industries.Our technology platform TIP offers robustsolutions for power distribution.The high quality of our productssets industry-wide benchmarks.High environmental aims are part ofour eco-management, and we implementthese aims consistently. Rightfrom product design, possible effects onthe environment are examined. Hencemany of our products and systems areRoHS compliant (Restriction of HazardousSubstances). As a matter of course,our production sites are certified accordingto DIN EN ISO 14001, but to us,environmental protection also meansmost efficient utilization of valuableresources. The best example are ourenergy-efficient drives with energysavings up to 60 %.Check out the opportunities ourautomation and drive solutions provide.And discover how you can sustainablyenhance your competitive edge with us.Siemens ST 70 N · 20101/3

© Siemens AG 2010ERP – Enterprise Resource PlanningManagement LevelMES – Manufacturing Execution SystemsOperations LevelSIMATIC PCS 7Process Control (DCS)Control LevelIndustrial Software for• Design and Engineering• Installation and Commissioning• OperationSIMOTIONMotion Control System• Maintenance• Modernization and Upgrade• Energy ManagementSINUMERIKComputer Numeric ControlField LevelPROFIBUS PAProcess InstrumentationSIMATIC SensorsTotallyIntegratedAutomationHARTIO-LinkSetting standards inproductivity and competitiveness.Totally Integrated Automation.Thanks to Totally Integrated Automation, Siemens is the only providerof an integrated basis for implementation of customized automationsolutions – in all industries from inbound to outbound.1/4 Siemens ST 70 N · 2010

© Siemens AG 2010EthernetSIMATIC ITEthernet02.03.2009SIMATIC WinCCSCADA SystemIndustrial EthernetIndustrial EthernetSIMATIC NETIndustrialCommunicationSIMATIC ControllersModular/Embedded/PC-basedSIMATIC HMIHuman Machine InterfaceSafety IntegratedLow-Voltage Controlsand DistributionPROFINETPROFIsafeIndustrial EthernetPROFIsafePROFIBUSSIMATIC Distributed I/OSINAMICS Drive SystemsASIsafeAS-InterfaceTotallyIntegratedPowerKNX GAMMA instabusTIA is characterized by its uniquecontinuity.It provides maximum transparency atall levels with reduced interfacing requirements– covering the field level,production control level, up to the corporatemanagement level. With TIAyou also profit throughout the completelife cycle of your plant – starting withthe initial planning steps through operationup to modernization, where weoffer a high measure of investment securityresulting from continuity in thefurther development of our productsand from reducing the number of interfacesto a minimum.The unique continuity is alreadya defined characteristic at thedevelopment stage of our productsand systems.The result: maximum interoperability –covering the controller, HMI, drives, upto the process control system. This reducesthe complexity of the automationsolution in your plant. You will experiencethis, for example, in the engineeringphase of the automation solution inthe form of reduced time requirementsand cost, or during operation using thecontinuous diagnostics facilities of TotallyIntegrated Automation for increasingthe availability of your plant.Siemens ST 70 N · 20101/5

© Siemens AG 2010Integrated power distributionfrom one source.Totally Integrated Power.1/6 Siemens ST 70 N · 2010

© Siemens AG 2010CommunicationIndustrial EthernetProcesses /industrial automationIEC 61850PROFIBUSPROFINETKNX EIBBACnetProducts and systems≤ 110 kVMedium voltage Transformers Low voltage InstallationtechnologyBuildingautomationPlanning and system configuration03.04.2008Electrical power distribution inbuildings requires integrated solutions.Our response: Totally Integrated Power.This means innovative and integrated,interface-optimized products andsystems which have been optimallycoordinated and complemented withcommunication and software modulesthat link power distribution to buildingautomation or industrial automation.Totally Integrated Power accompaniespower distribution projects from oneend to the other. From A to Z.From the planning to the building’s use:Totally Integrated Power offers significantadvantages in every projectstage and to everyone involved in theproject – the investors, electrical planningengineers, electricians, usersand building facility managers.Our portfolio comprises everythingfrom engineering tools to the matchinghardware: from switchgear anddistribution systems for medium voltageto transformers, from switchingand circuit-protection devices tolow-voltage switchgear and busbartrunking systems, as far as to the smalldistribution board and the wall outlet.It goes without saying that both themedium-voltage switchgear, whichrequires no maintenance, and thelow-voltage switchgear are type-tested,and their busbar connections, too.Comprehensive protection systemsensure the safety of man and machineat any time.Siemens ST 70 N · 20101/7

© Siemens AG 2010Much morethan a catalog.The Industry Mall.You have a catalog in your hands that will serveyou well for selecting and ordering your products.But have you heard of the electronic online catalog(the Industry Mall) and all its benefits? Take alook around it sometime:www.siemens.com/industrymallSelectingFind your products in the structure tree, in the new "Bread-crumb"navigation or with the integral search machine with expert functions.Electronic configurators are also integrated into the Mall. Enter thevarious characteristic values and the appropriate product will be displayedwith the relevant order numbers. You can save configurations,load them and reset them to their initial status.OrderingYou can load the products that you have selected in this way into theshopping basket at a click of the mouse. You can create your own templatesand you will be informed about the availability of the productsin your shopping cart. You can load the completed parts lists directlyinto Excel or Word.Delivery statusWhen you have sent the order, you will receive a short e-mail confirmationwhich you can print out or save. With a click on "Carrier", youwill be directly connected to the website of the carrier where you caneasily track the delivery status.Added value due to additional informationSo you have found your product and want more information about it?In just a few clicks of the mouse, you will arrive at the image data base,manuals and operating instructions. Create your own user documentationwith My Documentation Manager.Also available are FAQs, software downloads, certificates and technicaldata sheets as well as our training programs. In the image databaseyou will find, depending on the product, 2D/3Dgraphics, dimensiondrawings and exploded drawings, characteristic curves or circuitdiagrams which you can download.Convinced? We look forward to your visit!

© Siemens AG 2010LOGO! Logic module2/2 LOGO! Modular2/2 SIPLUS LOGO! Modular basic versions2/5 SIPLUS LOGO! Modular Pure versions2/8 LOGO! Modularanalog expansion modules2/9 SIPLUS LOGO! Modularexpansion modulesBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

LOGO! Logic moduleLOGO! Modular© Siemens AG 2010SIPLUS LOGO! Modular basic versions2■ Overview• The space-saving basic variants• Interface for the connection of expansion modules, up to 24digital inputs, 16 digital outputs, 8 analog inputs and 2 analogoutputs can be addressed• With connection option for LOGO! text display TD (can beconnected to all LOGO! 0BA6 basic versions)For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuEnvironmental SIPLUS extremeconditionsAmbient temperature -25 to +60/+70 °C 1)rangeRelative humidity 100%Dewing, condensation and icing permissibleContaminantconcentrationEN60721-3-3 3C4 and ISA S71.04 G1, G2,G3, GXConstant load Limit value 2)SO 2 4.8 ppm 17.8 ppmH 2 S 9.9 ppm 49.7 ppmCl 0.2 ppm 1.0 ppmHCl 0.66 ppm 3.3 ppmHF 0.12 ppm 2.4 ppmNH 49 ppm 247 ppmO 3 0.1 ppm 1.0 ppmNO x 5.2 ppm 10.4 ppmAt RH < 75%, condensation permittedSaline fog Saline fog test (EN 60068-2-52)Mechanically active EN60721-3-3 3S4substances• Dust4.0 mg/m 2 h(suspendedsubstance content)• Dust (precipitation) 40 mg/m 2 h incl. conductive sand/dust("Arizona dust")Biologically activesubstancesEN60721-3-3 3B2Mildew growth,Fungus, excluding fauna1) Depends on the product family2) 30 min/daySIPLUS LOGO! 24 SIPLUS LOGO! 12/24RC SIPLUS LOGO! 24RC SIPLUS LOGO! 230RCOrder No. 6AG1 052-1CC00-2BA6 6AG1 052-1MD00-2BA6 6AG1 052-1HB00-2BA6 6AG1 052-1FB00-2BA6Order No. based on 6ED1 052-1CC00-0BA6 6ED1 052-1MD00-0BA6 6ED1 052-1HB00-0BA6 6ED1 052-1FB00-0BA6Ambient temperature range -25 to+70°C- 25 to + 55 °C (for applications with cUL approval), condensation permissibleEnvironmental conditions Resistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2) activesubstances and compliant with ISA S71.04 G1, G2, G3, GX1).For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/2) or go towww.siemens.com/siplus-extremeApprovalsCE, cULTechnical specifications The technical data of the standard product apply with the exception of the environmental conditions.■ Technical specifications6AG1 052-1CC00-2BA6 6AG1 052-1MD00-2BA6 6AG1 052-1HB00-2BA6 6AG1 052-1FB00-2BA6Supply voltagesRated value• 12 V DCYes• 24 V DC Yes Yes Yes• 115 V DCYes• 230 V DCYes2/2 Siemens ST 70 N · 2010

© Siemens AG 2010LOGO! Logic moduleLOGO! ModularSIPLUS LOGO! Modular basic versions■ Technical specifications (continued)Rated value (continued)• permissible range, lower limit(DC)• permissible range, upper limit(DC)• 24 V AC• 115 V AC• 230 V AC• permissible range, lower limit(AC)• permissible range, upper limit(AC)Time of dayTime switching clocks6AG1 052-1CC00-2BA6 6AG1 052-1MD00-2BA6 6AG1 052-1HB00-2BA6 6AG1 052-1FB00-2BA620.4 V 10.8 V 20.4 V 100 V28.8 V 28.8 V 28.8 V 253 VYesYesYes20.4 V 85 V26.4 V 265 V• Power reserve 80 h 80 h 80 hDigital inputsNumber of digital inputs8; Of which 4 can be usedin analog mode (0 to 10 V)8; Of which 4 can be usedin analog mode (0 to 10 V)8 8Digital outputsNumber of digital outputs 4; Transistor 4; Relay 4; Relay 4; RelayShort-circuit protection Yes; electrical (1 A) No;external fusing necessaryRelay outputsSwitching capacity of contactsNo;external fusing necessaryNo;external fusing necessary• with inductive load, max. 3A 3A 3A• with resistive load, max. 0.3 A 10 A 10 A 10 AEMC• Emission of radio interference Yes Yes Yes Yesacc. to EN 55 011 (limit class B)Degree of protectionIP20 Yes Yes Yes YesStandards, approvals, certificatesCSA approval Yes Yes Yes Yesdeveloped according to Yes Yes Yes YesIEC1131-3FM approval Yes Yes Yes Yesaccording to VDE 0631 Yes Yes Yes YesMarine approval Yes Yes Yes YesUL approval Yes Yes Yes YesDimensions and weightDimensions and weight• Mountingon 35 mm DIN rail,4 spacing units wideon 35 mm DIN rail,4 spacing units wideon 35 mm DIN rail,4 spacing units wideon 35 mm DIN rail,4 spacing units wide• Width 72 mm 72 mm 72 mm 72 mm• Height 90 mm 90 mm 90 mm 90 mm•Depth 55 mm 55 mm 55 mm 55 mm2Siemens ST 70 N · 20102/3

LOGO! Logic moduleLOGO! Modular© Siemens AG 2010SIPLUS LOGO! Modular basic versions2■ Ordering data Order No. Order No.SIPLUS LOGO! 246AG1 052-1CC00-2BA6LOGO! memory card6ED1 056-1DA00-0BA0(extended temperature range andmedial exposure)24 V DC power supply,8x 24 V DC digital inputs, ofwhich 4 can be used in analogmode (0 ... 10 V),4x 24 V DC digital outputs, 0.3 A;200 function blocks can be interlinked,modular expansion capabilitySIPLUS LOGO! 12/24RC(extended temperature range andmedial exposure)12/24 V DC power supply,8x 12/24 V DC digital inputs, ofwhich 4 can be used in analogmode (0 ...10 V),4x 10 A relay outputs,integral time switch;200 function blocks can be interlinked,modular expansion capabilitySIPLUS LOGO! 24RC(extended temperature range andmedial exposure)24 V AC/DC power supply,8x 24 V AC/DC digital inputs,4x 10 A relay outputs,integral time switch;200 function blocks can be interlinked,modular expansion capabilitySIPLUS LOGO! 230RC(extended temperature range andmedial exposure)115/230 V AC/DC power supply,8x 115/230 V AC/DC digitalinputs,4x 10 A relay outputs,integral time switch;200 function blocks can be interlinked,modular expansion capabilityAccessoriesSIPLUS LOGO! TD text display(extended temperature range-10 ... +60 °C and medial load)4-line text display, can be connectedto all LOGO! 0BA6 Basicand Pure versions, including connectingcableLOGO! manualGermanEnglishFrenchSpanishItalianChinese6AG1 052-1MD00-2BA66AG1 052-1HB00-2BA66AG1 052-1FB00-2BA66AG1 055-4MH00-2BA06ED1 050-1AA00-0AE76ED1 050-1AA00-0BE76ED1 050-1AA00-0CE76ED1 050-1AA00-0DE76ED1 050-1AA00-0EE76ED1 050-1AA00-0KE7A: Subject to export regulations: AL: N and ECCN: EAR99SB: Subject to export regulations: AL: N and ECCN: EAR99TProgram module for copying,with know-how protectionLOGO! battery card6ED1 056-6XA00-0BA0Battery module for backing upthe integral real-time clock(not LOGO! 24)LOGO! memory/battery card 6ED1 056-7DA00-0BA0Combined program and batterymodule, with know-how protectionand for backing up the integralreal-time clock (not LOGO! 24)LOGO! PROM6AG1 057-1AA01-0BA6Programming device for modulesLOGO!Soft Comfort V6.0 A 6ED1 058-0BA02-0YA0For programming on the PC inLAD/FBD; executes onWindows 98 SE and higher, Linux,MAC OSX; on CD-ROMLOGO!Soft Comfort V6.0 A 6ED1 058-0CA02-0YE0UpgradeUpgrade from V1.0 to V6.0LOGO! PC cable6ED1 057-1AA00-0BA0For program transfer betweenLOGO! and the PCLOGO! USB PC cable B 6ED1 057-1AA01-0BA0For transferring the program betweenLOGO! and PC, includingdriver on CD-ROMLOGO! modem cable6ED1 057-1CA00-0BA0Adapter cable for analog modemcommunicationLOGO! Mounting setFor use in a front panel with Plexiglaspane and gasket• Mounting set 4 WM6AG1 057-1AA00-0AA0• Mounting set 4 WM with keys 6AG1 057-1AA00-0AA3• Mounting set 8 WM6AG1 057-1AA00-0AA1• Mounting set 8 WM with keys 6AG1 057-1AA00-0AA2SIPLUS upmiter6AG1 053-1AA00-2AA0power supply unitfor dependable operation ofSIPLUS devices supplied by thebattery of internal combustionengines2/4 Siemens ST 70 N · 2010

© Siemens AG 2010LOGO! Logic moduleLOGO! ModularSIPLUS LOGO! Modular Pure versions■ Overview• Basic variants optimized for costs• Interface for the connection of expansion modules, up to24 digital inputs, 16 digital outputs, 8 analog inputs and2 analog outputs can be addressed• With connection option for LOGO! text display TD (can beconnected to all LOGO! 0BA6 basic versions)For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku2SIPLUS LOGO! 24o SIPLUS LOGO! 12/24RCo SIPLUS LOGO! 24RCo SIPLUS LOGO! 230RCoOrder No. 6AG1 052-2CC00-2BA6 6AG1 052-2MD00-2BA6 6AG1 052-2HB00-2BA6 6AG1 052-2FB00-2BA6Order No. based on 6ED1 052-2CC00-0BA6 6ED1 052-2MD00-0BA6 6ED1 052-2HB00-0BA6 6ED1 052-2FB00-0BA6Ambient temperature rangeEnvironmental conditionsApprovalsTechnical specifications-25 to+70°C- 25 to + 55 °C (for applications with cUL approval), condensation permissibleResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2) activesubstances and compliant with ISA S71.04 G1, G2, G3, GX1).For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/2) or go towww.siemens.com/siplus-extremeCE, cULThe technical data of the standard product apply with the exception of the environmental conditions.■ Technical specifications6AG1 052-2CC00-2BA6 6AG1 052-2MD00-2BA6 6AG1 052-2HB00-2BA6 6AG1 052-2FB00-2BA6Supply voltagesRated value• 12 V DCYes• 24 V DC Yes Yes Yes• 115 V DCYes• 230 V DCYes• permissible range, lower limit 20.4 V 10.8 V 20.4 V 100 V(DC)• permissible range, upper limit 28.8 V 28.8 V 28.8 V 253 V(DC)• 24 V ACYes• 115 V ACYes• 230 V ACYes• permissible range, lower limit20.4 V 85 V(AC)• permissible range, upper limit(AC)26.4 V 265 VSiemens ST 70 N · 20102/5

LOGO! Logic moduleLOGO! Modular© Siemens AG 2010SIPLUS LOGO! Modular Pure versions2■ Technical specifications (continued)Time of dayTime switching clocks6AG1 052-2CC00-2BA6 6AG1 052-2MD00-2BA6 6AG1 052-2HB00-2BA6 6AG1 052-2FB00-2BA6• Number 8 8 8• Power reserve 80 h 80 h 80 hDigital inputsNumber of digital inputs8; Of which 4 can be usedin analog mode (0 to 10 V)8; Of which 4 can be usedin analog mode (0 to 10 V)8 8Digital outputsNumber of digital outputs 4; Transistor 4; Relay 4; Relay 4; RelayShort-circuit protection Yes; electrical (1 A) No;external fusing necessaryRelay outputsSwitching capacity of contactsNo;external fusing necessaryNo;external fusing necessary• with inductive load, max. 3A 3A 3A• with resistive load, max. 0.3 A 10 A 10 A 10 AEMC• Emission of radio interferenceYes Yes Yesacc. to EN 55 011 (limit class B)Degree of protectionIP20 Yes Yes Yes YesStandards, approvals,certificatesCSA approval Yes Yes Yes Yesdeveloped according to Yes Yes Yes YesIEC1131-3FM approval Yes Yes Yes Yesaccording to VDE 0631 Yes Yes Yes YesMarine approval Yes Yes Yes YesUL approval Yes Yes Yes YesDimensions and weightDimensions and weight• Mountingon 35 mm DIN rail,4 spacing units wideon 35 mm DIN rail,4 spacing units wideon 35 mm DIN rail,4 spacing units wideon 35 mm DIN rail,4 spacing units wide• Width 72 mm 72 mm 72 mm 72 mm• Height 90 mm 90 mm 90 mm 90 mm•Depth 55 mm 55 mm 55 mm 55 mm2/6 Siemens ST 70 N · 2010

© Siemens AG 2010LOGO! Logic moduleLOGO! ModularSIPLUS LOGO! Modular Pure versions■ Ordering data Order No. Order No.SIPLUS LOGO! 24o6AG1 052-2CC00-2BA6LOGO! manual(extended temperature range andGerman6ED1 050-1AA00-0AE7medial exposure)English6ED1 050-1AA00-0BE724 V DC power supply,8x digital inputs 24 V DC,French6ED1 050-1AA00-0CE7of which 4 can be used in analogSpanish6ED1 050-1AA00-0DE7mode (0 ...10 V),4x digital outputs 24 V DC, 0.3 A;Italian6ED1 050-1AA00-0EE7without display and keyboard;200 function blocks can be interlinked,Chinese6ED1 050-1AA00-0KE7modular expansion capa-LOGO! memory card6ED1 056-1DA00-0BA0bilityProgram module for copying,SIPLUS LOGO! 12/24RCo 6AG1 052-2MD00-2BA6with know-how protection(extended temperature range andLOGO! battery card6ED1 056-6XA00-0BA0medial exposure)12/24 V DC power supply,8x digital inputs 12/24 V DC,of which 4 can be used in analogmode (0 ... 10 V),4x relay outputs 10 A,integral time switch;without display and keyboard;200 function blocks can be interlinked,modular expansion capabilitySIPLUS LOGO! 24RCo(extended temperature range andmedial exposure)24 V AC/DC power supply,8 digital inputs 24 V AC/DC,4 relay outputs 10 A,integral time switch;without display and keyboard;130 function blocks can be interlinked,modular expansion capabilitySIPLUS LOGO! 230RCo(extended temperature range andmedial exposure)115/230 V AC/DC power supply,8x digital inputs 115/230 VAC/DC, 4 relay outputs 10 A,integral time switch;without display and keyboard;200 function blocks can be interlinked,modular expansion capabilityAccessoriesSIPLUS LOGO! TD text display(extended temperature range-10 ... +60 °C and medial load)4-line text display, can be connectedto all LOGO! 0BA6 Basicand Pure versions, including connectingcable6AG1 052-2HB00-2BA66AG1 052-2FB00-2BA66AG1 055-4MH00-2BA0Battery module for backing upthe integral real-time clock(not LOGO! 24)LOGO! memory/battery card 6ED1 056-7DA00-0BA0Combined program and batterymodule, with know-how protectionand for backing up the integralreal-time clock (not LOGO! 24)LOGO! PROM6AG1 057-1AA01-0BA6Programming device for modulesLOGO!Soft Comfort V6.0 A 6ED1 058-0BA02-0YA0For programming on the PC inLAD/FBD; executes onWindows 98 SE and higher, Linux,MAC OSX; on CD-ROMLOGO!Soft Comfort V6.0 A 6ED1 058-0CA02-0YE0UpgradeUpgrade from V1.0 to V6.0LOGO! PC cable6ED1 057-1AA00-0BA0For program transfer betweenLOGO! and the PCLOGO! USB PC cable B 6ED1 057-1AA01-0BA0For transferring the program betweenLOGO! and PC, includingdriver on CD-ROMLOGO! modem cable6ED1 057-1CA00-0BA0Adapter cable for analog modemcommunicationLOGO! Mounting setFor use in a front panel withPlexiglas pane and gasket• Mounting set 4 WM6AG1 057-1AA00-0AA0• Mounting set 4 WM with keys 6AG1 057-1AA00-0AA3• Mounting set 8 WM6AG1 057-1AA00-0AA1• Mounting set 8 WM with keys 6AG1 057-1AA00-0AA2SIPLUS upmiter6AG1 053-1AA00-2AA0power supply unitfor dependable operation ofSIPLUS devices supplied by thebattery of internal combustionengines2A: Subject to export regulations: AL: N and ECCN: EAR99SB: Subject to export regulations: AL: N and ECCN: EAR99TSiemens ST 70 N · 20102/7

LOGO! Logic moduleLOGO! Modular© Siemens AG 20102LOGO! Modular analog expansion modules■ Overview• Expansion modules for the connection to LOGO! Modular• With digital inputs and outputs, analog inputs or analog outputs■ Technical specifications6ED1 055-1MM00-0BA1Supply voltagesRated value• 12 V DCNo• 24 V DCYesAnalog outputsNumber of analg outputs 2Output ranges, voltage• 0 to 10 VYesEMC• Emission of radio interference to YesEN 55 011 (limit class B)Environmental requirementsOperating termperature•min. 0°C• max. 55 °CDegree of protectionIP 20YesStandards, approvals, certificatesCSA approvalYesDeveloped to IEC1131YesFM approvalYesto VDE 0631YesMarine approvalYesUL ApprovalYesDimensions and weightDimensions• Mountingon 35 mm DIN rail, 2 spacingunits wide• Width36 mm• Height90 mm•Depth55 mm■ Ordering dataOrder No.LOGO! AM2 AQ C 6ED1 055-1MM00-0BA1Supply voltage 24 V DC,2 analog outputs, 0 ... 10 V,0/4 ... 20 mAAccessoriesLOGO! ManualGerman6ED1 050-1AA00-0AE7English6ED1 050-1AA00-0BE7French6ED1 050-1AA00-0CE7Spanish6ED1 050-1AA00-0DE7Italian6ED1 050-1AA00-0EE7Chinese6ED1 050-1AA00-0KE7LOGO! memory card6ED1 056-5CA00-0BA0for copying,with know-how protectionLOGO!Soft Comfort V6.0 A 6ED1 058-0BA02-0YA0For programming on the PC inLAD/FBD; executes onWindows 98 SE and higher, Linux,MAC OSX; on CD-ROMLOGO!Soft Comfort V6.0 A 6ED1 058-0CA02-0YE0upgradeUpgrade from V1.0 to V6.0LOGO! PC cable6ED1 057-1AA00-0BA0For program transfer betweenLOGO! and the PCA: Subject to export regulations: AL: N and ECCN: EAR99SC: Subject to export regulations: AL: N and ECCN: EAR99H2/8 Siemens ST 70 N · 2010

© Siemens AG 2010LOGO! Logic moduleLOGO! ModularSIPLUS LOGO! Modular expansion modules■ Overview• Expansion modules for connection to LOGO! Modular• With digital inputs and outputs, analog inputs, or analog outputsFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku2SIPLUS LOGO! DM8 24 SIPLUS LOGO! AM2 AQ SIPLUS LOGO! DM16 24ROrder No. 6AG1 055-1PB00-2BY0 6AG1 055-1MM00-2BY1 6AG1 055-1NB10-2BA0Order No. based on 6ED1 055-1CB00-0BA0 6ED1 055-1MM00-0BA1 6ED1 055-1NB10-0BA0Ambient temperature range -25 to+70°C- 25 to + 55 °C (for applications with cUL approval), condensation permissibleEnvironmental conditions Resistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2) activesubstances and compliant with ISA S71.04 G1, G2, G3, GX1).For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 2/2) or go towww.siemens.com/siplus-extremeApprovals CE, cUL CE, cUL (available soon)Technical specificationsThe technical data of the standard product apply with the exception of the environmental conditions.■ Technical specifications6AG1 055-1PB00-2BY0 6AG1 055-1NB10-2BA0 6AG1 055-1MM00-2BY1Supply voltagesRated value• 12 V DC Yes No• 24 V DC Yes Yes Yes• permissible range, lower limit (DC) 10.8 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 VDigital inputsNumber of digital inputs 4 8Input voltage• for signal "0"< 5 V DC• for signal "1"> 12 V DCInput current• for signal "0", max. (permissible quiescent1mAcurrent)• for signal "1", typ.2mAInput delay (for rated value of input voltage)• for standard inputs- at "0" to "1", max. 1.5 ms- at "1" to "0", max. 1.5 msSiemens ST 70 N · 20102/9

LOGO! Logic moduleLOGO! Modular© Siemens AG 2010SIPLUS LOGO! Modular expansion modules2■ Technical specifications (continued)Digital outputsNumber of digital outputs 4 8; Relay6AG1 055-1PB00-2BY0 6AG1 055-1NB10-2BA0 6AG1 055-1MM00-2BY1Short-circuit protection Yes; electrical (1 A) No; external fusing necessaryLamp load, max.Controlling a digital inputParallel switching of 2 outputs• for increased powerSwitching frequency• with resistive load, max.• with inductive load, max.• mechanical, max.Relay outputsSwitching capacity of contacts• with inductive load, max.• with resistive load, max.• Thermal continuous current, max.Analog outputs0,3 A1 000 W; 500 W at 115 V ACYesNo2Hz0,5 Hz10 HzNumber of analg outputs 2Output ranges, voltage• 0 to 10 VEMC• Emission of radio interference acc. toEN 55 011 (limit class B)Degree of protection3A5AYes Yes YesIP20 Yes Yes YesStandards, approvals, certificatesCSA approval Yes Yes Yesdeveloped according to IEC1131-3 Yes Yes YesFM approval Yes Yes Yesaccording to VDE 0631 Yes Yes YesMarine approval Yes Yes YesUL approval Yes Yes YesDimensions and weightDimensions and weight• Mountingon 35 mm DIN rail, 2 spacingunits wideon 35 mm DIN rail, 4 spacingunits wide• Width 36 mm; 2 DU 72 mm; 4 DU 36 mm• Height 90 mm 90 mm 90 mm•Depth 55 mm 53 mm 55 mmYeson 35 mm DIN rail, 2 spacingunits wide2/10 Siemens ST 70 N · 2010

© Siemens AG 2010LOGO! Logic moduleLOGO! ModularSIPLUS LOGO! Modular expansion modules■ Ordering data Order No. Order No.SIPLUS LOGO! DM8 24(extended temperature range andmedial exposure)Supply voltage 24 V DC,4x digital inputs 124 V DC,4x digital outputs 24 V DC, 0.3 A,temperature range -40 ... +70 °CSIPLUS LOGO! DM16 24R(extended temperature range andmedial exposure)Supply voltage 24 V DC,8x digital inputs 24 V DC,8x relay outputs 5 A,temperature range -25 ... +70 °CSIPLUS LOGO! AM2 AQ(extended temperature range andmedial exposure)24 V DC power supply,2x analog inputs 0 ... 10 V,0/4 ... 20 mA, 10-bit resolution,temperature range -40 ... +70 °C6AG1 055-1PB00-2BY06AG1 055-1NB10-2BA06AG1 055-1MM00-2BY1AccessoriesLOGO! manualGerman6ED1 050-1AA00-0AE7English6ED1 050-1AA00-0BE7French6ED1 050-1AA00-0CE7Spanish6ED1 050-1AA00-0DE7Italian6ED1 050-1AA00-0EE7Chinese6ED1 050-1AA00-0KE7LOGO! memory card6ED1 056-5CA00-0BA0for copying,with know-how protectionLOGO!Soft Comfort V6.0 A 6ED1 058-0BA02-0YA0For programming on the PC inLAD/FBD; executes onWindows 98 SE and higher, Linux,MAC OSX; on CD-ROMLOGO!Soft Comfort V6.0 A 6ED1 058-0CA02-0YE0upgradeUpgrade from V1.0 to V6.0LOGO! PC cable6ED1 057-1AA00-0BA0For program transfer betweenLOGO! and the PC2A: Subject to export regulations: AL: N and ECCN: EAR99S■Siemens ST 70 N · 20102/11

LOGO! Logic module© Siemens AG 201022/12 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-2003/2 Communication3/2 CP 243-13/5 Human machine interface3/5 Text Display TD 400CBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

SIMATIC S7-200Communication© Siemens AG 2010CP 243-1■ Overview3ISOTCPPNMRPITIP-RPG/OPS7G_IK10_XX_10141• Connection of S7-200 to Industrial Ethernet- 1 x RJ45 interface for 10/100 Mbit/s full/half duplex connectionwith autosensing/autonegotiation and autocrossoverfunction• Communication services:- PG/OP communication- S7 communication• Configuration, remote programming and service with STEP 7Micro/WIN over Industrial Ethernet possible (program uploadand program download, status)• CPU/CPU communication over Industrial Ethernet possible(client + server, eight S7 connections + one PG connection)• IT communication- Web function- E-mail function- FTP client function for program-controlled data communication(e.g. DOS, UNIX, Linux, embedded systems)•FTP server• An S7 OPC server (e.g. SOFTNET-S7 or S7-1613) allows PLCdata to be further processed in PC applications■ Technical specifications6GK7 243-1EX01-0XE0Product type designation CP 243-1Transmission rateTransmission rate at interface 1 10 … 100 Mbit/sInterfacesNumber of electrical connections• at interface 1 in accordance with 1Industrial Ethernet• for power supply 1Design of electrical connection• at interface 1 in accordance with RJ45 portIndustrial Ethernet• for power supply3-pin terminal stripSupply voltage, current consumption,power lossType of power supplyDCPower supply• 1 from backplane bus5V• External24 VRelative positive tolerance at 20%24 V DCRelative negative tolerance at 15%24 V DCCurrent consumed• from backplane bus at 5 V DC, 0.06 Atypical• from external power supply with24 V DC- Typical 0.053 A- Maximum 0.06 AEffective power loss1.5 W6GK7 243-1EX01-0XE0Product type designation CP 243-1Permitted ambient conditionsAmbient temperature• With vertical installation during 0 … 45 °Coperating phase• With horizontal installation during 0 … 55 °Coperating phase• During storage -40 … +70 °C• During transport -40 … +70 °CAmbient temperature - Note -Relative humidity at 25 °C without 95%condensation during operatingphase, maximumDesign, dimensions and weightsModule formatS7-200 compact module,double-widthWidth71.2 mmHeight80 mmDepth62 mmNet weight0.15 kgProduct properties, functions,components GeneralMaximum number of modules per 1CPUNumber of modules - Note -3/2 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-200Communication■ Technical specifications (continued)Product type designation CP 243-1Performance dataPerformance data S7 communicationNumber of possible connections forS7 communication• Maximum 8• Maximum with1PG connections• Maximum with8PG/OP connectionsNumber of possible connections for -S7 communication - NotePerformance data IT functionsNumber of possible connections• as client with FTP, maximum 1• as server with HTTP, maximum 4• as e-mail client, maximum 16GK7 243-1EX01-0XE0CP 243-16GK7 243-1EX01-0XE0Product type designation CP 243-1Number of e-mails with 1024 charactersof e-mail client, maximum32Number of access privileges of 8access protection functionStorage capacity of user memory as 8 MibyteFLASH memory file systemNumber of possible write cycles of 100,000flash memory cellsProduct functions Management,configuration, programmingProduct function: MIB support NoProtocol is supported SNMP v1 NoConfiguration software required STEP 7-Micro/WIN V4.0 SP8 andhigher3Siemens ST 70 N · 20103/3

SIMATIC S7-200Communication© Siemens AG 2010CP 243-13■ Ordering data Order No. Order No.CP 243-1 communications 6GK7 243-1EX01-0XE0processorfor connection of SIMATIC S7-200to Industrial Ethernet;for S7 communication, PG communication,E-mail and WWW server;with electronic manual onCD-ROMGerman, English, French, Italian,SpanishSOFTNET Edition 2008 forIndustrial EthernetSoftware for S7 and open communication,incl. OPC server, PG/OPcommunication and NCM PC,runtime software, software andelectronic manual on CD-ROM,license key on USB flash drive,Class A, for 32-bitWindows XP Professional SP2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1; Windows 2008 Server;German/EnglishSOFTNET-S7 Edition 2008 forIndustrial Ethernetup to 64 connections• Single license for 1 installation D 6GK1 704-1CW71-3AA0• Software Update Service for 6GK1 704-1CW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade from Edition 2006 D 6GK1 704-1CW00-3AE0and higher to Edition 2008• Upgrade from V6.0, V6.1, V6.2 D 6GK1 704-1CW00-3AE1or V6.3 to Edition 2008SOFTNET-S7 Lean Edition 2008for Industrial Ethernetup to 8 connections• Single license for 1 installation D 6GK1 704-1LW71-3AA0• Software Update Service for 6GK1 704-1LW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade from Edition 2006 D 6GK1 704-1LW00-3AE0and higher to Edition 2008• Upgrade from V6.0, V6.1, V6.2 D 6GK1 704-1LW00-3AE1or V6.3 to Edition 2008S7-1613 Edition 2008Software for S7 and open communication,incl. PG/OP communication,OPC server and NCM PC;up to 120 connections, runtimesoftware, software and electronicmanual on CD-ROM, license keyon USB flash drive, Class A, for32-bit Windows XP ProfessionalSP2/3; Windows 2003 Server R2,SP2; Windows Vista Business/UltimateSP1; Windows 2008 Server;for CP 1613/CP 1613 A2/CP 1623;German/English• Single license for 1 installation D 6GK1 716-1CB71-3AA0A: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D992S7-1613 Edition 2008(continued)• Software Update Service for 6GK1 716-1CB00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade S7-1613,D 6GK1 716-1CB00-3AE0Edition 2006 or higher, toS7-1613 Edition 2008• Upgrade S7-1613 from V6.0, D 6GK1 716-1CB00-3AE1V6.1, V6.2 or V6.3 to S7-1613Edition 2008STEP 7-Micro/WIN V4programming softwareTarget system:All CPUs of the SIMATIC S7-200Prerequisite:Windows 2000/XP on PG or PCType of delivery:German, English, French,Spanish, Italian, Chinese;with online documentation• Single license A 6ES7 810-2CC03-0YX0• Upgrade Single License 1) A 6ES7 810-2CC03-0YX3IE FC TP Standard Cable GP 6XV1 840-2AH102x24-core, shielded TP installationcable for connection toIE FC Outlet RJ45/ IE FC RJ45Plug; PROFINET-compatible;with UL approval;sold by the meterFO Standard Cable GP (50/125) 6XV1 873-2AStandard cable, splittable,UL approval, sold by the meterSCALANCE X204-2 Industrial 6GK5 204-2BB10-2AA3Ethernet switchIndustrial Ethernet switches withintegral SNMP access, web diagnostics,copper cable diagnosticsand PROFINET diagnostics forconfiguring line, star and ringtopologies; four 10/100 Mbit/sRJ45 ports and two FO ports,IE FC RJ45 plugs, RJ45 plugs forIndustrial Ethernet with ruggedmetal enclosure and integral insulationdisplacement contacts forthe connection of the IndustrialEthernet FC installation cablesIE FC RJ45 Plug 180180° cable outlet• 1 unit6GK1 901-1BB10-2AA0• 10 units6GK1 901-1BB10-2AB0• 50 units6GK1 901-1BB10-2AE01) Upgrade for all previous STEP 7-Micro/WIN and STEP 7-Micro/DOSversions3/4 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-200Human machine interfaceText Display TD 400C■ Overview• More screen space and extremely good readability thanks tobacklit four-line display• Customizable operator interface with 15 tactile keys• Acoustic and visual feedback from key operation• Optimal support of the S7-200:- Direct connection to the S7-200 interface via supplied cable- No separate power supply required- Parameterization with STEP 7-Micro/WIN V4 SP6■ Technical specifications6AV6 640-0AA00-0AX1Product type designation Text Display TD 400CSupply voltageSupply voltage24 V DCpermissible rangeDCMemoryUsable memory for user data No infoConfigurationConfiguration toolMicroWin (to be ordered separately)DisplayDisplay typeSTN, Black/WhiteSize 3.7"Resolution (WxH in pixel) 192 x 64Backlighting• MTBF backlighting (at 25 °C) about 20,000 hoursOperating modeControl elementsMembrane keyboardFunction keys, programmable 15 function keysMembrane keyboardYesAmbient conditionsTemperature•Operation 0 °C to +50 °C• Transport, storage -20 °C to +60 °C6AV6 640-0AA00-0AX1Degree of protectionFront IP65, NEMA 4, NEMA 4x, NEMA 12(when installed)RearIP20Certifications & standardsCertificationsCE, FM Class I Div. 2, UL, C-TICK,NEMA 4, NEMA 4x, NEMA 12InterfacesInterfaces1 x RS485 (max. 187.5 Mbit/s)Functionality underWinCC flexibleSecurity• Number of user groups 1Dimensions and weightWeight• Weight0.33 kg■ Ordering dataOrder No.TD 400C Text Display C 6AV6 640-0AA00-0AX1with customized operatorinterface on the device front;for connecting to SIMATICS7-200; can be used fromSTEP 7-Micro/WIN V4 SP6,incl. connecting cablePromotion package B 6ES7 298-1AA20-0YA3Consisting of:• TD 400C• SIMATIC S7-200• SIMATIC STEP 7 Micro/WINV4.0• Simulator module• Memory module• PPI cable• CD-ROM with documentation• TANOS BoxConnecting cables6ES7 901-3EB10-0XA0for connecting TD 100C/TD 200Cor TD 400C to S7-200Blank foils6AV6 671-0AP00-0AX0for printing customized keyboardlayouts;2 perforated films per sheet;10 sheets per packAccessoriesAccessories for supplementaryorderingSee Catalog ST 803B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99H■Siemens ST 70 N · 20103/5

SIMATIC S7-200© Siemens AG 201033/6 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-12004/2 Introduction4/5 Central processing units4/5 CPU 1211C4/15 CPU 1212C4/25 CPU 1214C4/35 SIPLUS central processing units4/41 Digital modules4/41 SM 1221 digital input module4/44 SB 1221 digital input module4/46 SM 1222 digital output module4/50 SB 1222 digital output module4/52 SM 1223 digital input/output module4/57 SB 1223 digital input/output module4/61 SIPLUS digital modules4/64 Analog modules4/64 SM 1231 analog input module4/67 SM 1232 analog output module4/70 SB 1232 analog output module4/72 SM 1234 analog input/output module4/75 SM 1231 Thermocouple module4/77 SM 1231 RTD signal module4/79 SIPLUS analog modules4/82 Special modules4/82 SIM 1274 simulator4/83 Communication4/83 CM 1241 communication module4/85 CSM 1277 unmanaged4/88 SIPLUS communication4/88 SIPLUS CM 1241 communication module4/89 Power supplies4/89 PM 1207 power supply4/90 SIPLUS power supplies4/90 SIPLUS PM 1207 power supply4/91 Operator control and monitoring4/91 Basic Panels4/98 SoftwareBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

SIMATIC S7-1200Introduction© Siemens AG 2010S7-12004■ Overview• The new modular miniature controller from the SIMATIC S7family• Consisting of:- controller with integrated PROFINET interface for communicationwith programming device, HMI or other SIMATIC controllers- powerful, integrated technology functions such as counting,measuring, closed-loop control, and motion control- integrated digital and analog inputs/outputs- signal boards for direct use in a controller- signal modules for expansion of controllers by input/outputchannels- communication modules for expansion of controllers bycommunications interfaces- accessories, e.g. power supply, switch module or SIMATICMemory Card• The miniature controller that offers maximum automation atminimum cost• Extremely simple installation, programming and operation• Large-scale integration, space-saving, powerful• Suitable for small to medium-size automation engineeringapplications• Can be used both for simple controls and for complex automationtasks• All CPUs can be used in stand-alone mode, in networks andwithin distributed structures• Suitable for applications where programmable controllerswould not have been economically viable in the past• With exceptional real-time performance and powerful communicationoptions■ ApplicationThe SIMATIC S7-1200 is the controller for open-loop and closedloopcontrol tasks in mechanical equipment manufacture andplant construction. It combines maximum automation and minimumcost.Due to the compact modular design with a high performance atthe same time, the SIMATIC S7-1200 is suitable for a wide varietyof automation applications. Its range of use extends from thereplacement of relays and contactors up to complex automationtasks in networks and within distributed structures.The S7-1200 also increasingly opens up areas for which specialelectronics was previously developed for economical reasons.Application examples include, for example:• Placement systems• Conveyor systems• Elevators and escalators• Material transportation equipment• Metalworking machinery• Packaging machines• Printing machines• Textile machines• Mixing systems• Freshwater treatment plants• Wastewater treatment plants• External displays• Electricity distribution stations• Room temperature control• Heating/cooling system control• Energy management• Fire protection systems• Air conditioning• Lighting control• Pump control• Security/access control systems■ DesignThe SIMATIC S7-1200 family consists of the following modules:• 3 compact controllers with graded performances in differentversions as wide-range AC or DC controllers• 2 signal boards (analog and digital) for low-cost modularcontroller expansion directly on the CPU, with retention of themounting space• 13 different digital and analog signal modules• 2 communication modules (RS232/RS485) for communicationvia point-to-point connection• Ethernet switch with 4 ports for implementation of manydifferent network topologies• PS 1207 stabilized power supply units,line voltage 115/230 V AC, rated voltage 24 V DCMechanical features• Rugged, compact plastic enclosure• Easily accessible connection and control elements, protectedby front flaps• Removable connection terminals, also for analog or digitalexpansion modulesDevice features• International standards:SIMATIC S7-1200 complies with the standards according toVDE, UL, CSA and FM (Class I, Category 2;Danger zone groups A, B, C and D, T4A). The quality managementsystem used during production is certified according toISO 90014/2 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Introduction■ Design (continued)CommunicationThe SIMATIC S7-1200 is equipped with different communicationmechanisms:• Integral PROFINET interface• Point-to-point connection via communication modulesPROFINET interfaceThe integral PROFINET interface permits communication with:• Programming device• HMI devices• Other SIMATIC controllersThe following protocols are supported:• TCP/IP• ISO-on-TCP• S7 communicationThe following can be connected:Field PG programming device and PCs via standard CAT5cable.• Further SIMATIC S7-1200 controllersCSM 1277EthernetSwitchPROFINETSIMATIC S7-1200Basic PanelConnection of several devices via CSM 1277 Ethernet switchS7-1200Point-to-point interface, freely-programmable interface modeCommunication modules permit communication via point-topointconnections. The RS232 and RS485 physical transmissionmedia are used. Data transmission is carried out in the "Freeport"mode of the CPU. A user-specific, bit-oriented communicationprotocol is used (e.g. ASCII protocol, USS, or MODBUS).Any terminal equipment with a serial interface can be connected,e.g. drives, printers, bar code readers, modems, etc.G_ST70_XX_006094PGPROFINETSIMATICS7-1200G_ST70_XX_00607Point-to-pointconnectionCM 1241SIMATIC S7-1200Connection between PG and CPU of SIMATIC S7-1200• SIMATIC HMI Basic PanelsPrinter Modem DriveG_ST70_XX_00610Point-to-point connection via CM 1241 in programmable interface modeBasic PanelPROFINETSIMATICS7-1200G_ST70_XX_00608Connection between Basic Panel and CPU of SIMATIC S7-1200Siemens ST 70 N · 20104/3

SIMATIC S7-1200Introduction© Siemens AG 20104S7-1200■ FunctionThe S7-1200 is characterized by:• Extremely simple starter solution:Special starter packages and introductions facilitate familiarization.• Uncomplicated operation:Powerful standard commands which are simple to use,together with the user-friendly programming software, reducethe programming overhead to a minimum.• Exceptional real-time characteristics:Special interrupt functions, fast counters, and pulse outputspermit use even with time-critical processes.The SIMATIC S7-1200 meets national and internationalstandards:• UL 508• CSA C22.2 No. 142• FM Class I, div. 2, group A, B, C, D; T4A Class I, Zone 2, IIC, T4• VDE 0160• EN 61131-2• Requirements of the EMC directive in accordance withEN 50081-1, 50081-2 and 50082-2■ Technical specificationsGeneral technical specificationsDegree of protection IP20 acc. to IEC 529Ambient temperature•Operation(95% humidity)- horizontal installation 0 ... 55 °C- vertical installation 0 ... 45 °C• Transportation and storage -40 ... +70 °C- with 95% humidity 25 ... 55 °CInsulation• 5/24 V DC circuits500 V AC test voltage• 115/230 V AC circuits to ground 1500 V AC test voltage• 115/230 V AC circuits to1500 V AC test voltage115/230 V AC circuits• 230 V AC circuits to1500 V AC test voltage5/24 V DC circuits• 115 V AC circuits to1500 V AC test voltage5/24 V DC circuitsElectromagnetic compatibility Requirements of the EMCdirective• Noise immunity acc. toEN 50082-2• Emitted interference acc. toEN 50081-1 and EN 50081-2Test acc. to:IEC 801-2, IEC 801-3, IEC 801-4,EN 50141, EN 50204, IEC 801-5,VDE 0160Test according toEN 55011, Class A, Group 1General technical specificationsMechanical strength• Vibrations, test acc. to /tested with• Shocks, test acc. to / tested with1) Depends on the product family2) ISA -S71.04 severity level GX from October 20103) 30 min/dayIEC 68, Part 2-6:10 ... 57 Hz;constant amplitude0.3 mm;58 ... 150 Hz;constant acceleration 1 g(mounted on DIN rail) or2 g (mounted in switchboard);mode of vibration:frequency sweeps with a sweeprate of 1 octave/minute;duration of vibration:10 frequency sweeps per axis ineach direction of the three mutuallyperpendicular axesIEC 68, Part 2-27/half-sine:magnitude of shock 15 g (peakvalue), duration 11 ms, 6 shocksin each of the three mutually perpendicularaxesEnvironmental SIPLUS extremeconditionsAmbient temperature -25 to +60/+70 °C 1)rangeRelative humidity 100%Dewing, condensation and icing permissibleContaminantconcentrationEN60721-3-3 3C4 and ISA S71.04 G1, G2,G3, GX 2) Constant load Limit value 3)SO 2 4.8 ppm 17.8 ppmH 2 S 9.9 ppm 49.7 ppmCl 0.2 ppm 1.0 ppmHCl 0.66 ppm 3.3 ppmHF 0.12 ppm 2.4 ppmNH 49 ppm 247 ppmO 3 0.1 ppm 1.0 ppmNO x 5.2 ppm 10.4 ppmAt RH < 75%, condensation permittedSaline fog Saline fog test (EN 60068-2-52)Mechanically active EN60721-3-3 3S4substances• Dust4.0 mg/m 2 h(suspendedsubstance content)• Dust (precipitation) 40 mg/m 2 h incl. conductive sand/dust("Arizona dust")Biologically activesubstancesEN60721-3-3 3B2Mildew growth,Fungus, excluding fauna■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/4 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1211C■ Overview• The clever compact solution• With 10 integral input/outputs• Expandable by:- 1 signal board (SB)- max. 3 communication modules (CM)4■ DesignThe compact CPU 1211C has:• 3 device versions with different power supply and controlvoltages.• Integrated power supply either as wide-range AC or DCpower supply (85 to 264 V AC or 24 V DC)• Integrated 24 V encoder/load current supply:For direct connection of sensors and encoders. With 300 mAoutput current also for use as load power supply.• 6 integrated digital inputs 24 V DC (current sinking/currentsourcing (IEC type 1 current sinking)).• 4 integrated digital outputs, either 24 V DC or relay.• 2 integrated analog inputs 0 to 10 V.• 2 pulse outputs (PTO) with a frequency of up to 100 kHz.• Pulse-width modulated outputs (PWM) with a frequency of upto 100 kHz.• Integrated Ethernet interface (TCP/IP native, ISO-on-TCP)• 3 fast counters (100 kHz), with parameterizable enable and resetinputs, can be used simultaneously as up and downcounters with separate inputs or for connecting incrementalencoders.• Expansion by additional communication interfaces, e.g.RS485 or RS232• Expansion by analog or digital signals directly on the CPU viasignal board (with retention of CPU mounting dimensions)• Optional memory expansion (SIMATIC Memory Card)• PID controller with auto-tuning functionality• Integral real-time clock• Interrupt inputs:For extremely fast response to rising or falling edges of processsignals.• Removable terminals on all modules• Simulator (optional):For simulating the integrated inputs and for testing the userprogram.Device versionsVersion Supply voltage Input voltage DI Output voltage DO Output current• DC/DC/DC 24 V DC 24 V DC 24 V DC 0.5 A, transistor• DC/DC/relay 24 V DC 24 V DC 5 … 30 V DC /5 … 250 V AC• AC/DC/relay 85 … 264 V AC 24 V DC 5 … 30 V DC /5 … 250 V AC2 A;30 W DC /200 W AC2 A;30 W DC /200 W ACSiemens ST 70 N · 20104/5

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1211C4■ Function• Comprehensive instruction set:A wide range of operations facilitate programming:- basic operations such as binary logic operations, result allocation,save, count, create times, load, transfer, compare,shift, rotate, create complement, call subprogram (with localvariables)- integral communication commands (e.g. USS protocol,Modbus RTU, S7 communication "T-Send/T-Receive" orFreeport)- user-friendly functions such as pulse-width modulation,pulse sequence function, arithmetic functions, floating pointarithmetic, PID closed-loop control, jump functions, loopfunctions and code conversions- mathematical functions, e.g. SIN, COS, TAN, LN, EXP• Counting:User-friendly counting functions in conjunction with the integratedcounters and special commands for high-speedcounters open up new application areas for the user• Interrupt processing:- edge-triggered interrupts (activated by rising or fallingedges of process signals on interrupt inputs) support a rapidresponse to process events- time-triggered interrupts- counter interrupts can be triggered when a setpoint isreached or when the direction of counting changes- communication interrupts allow the rapid and easy exchangeof information with peripheral devices such as printersor bar code readers• Password protection• Test and diagnostics functions:Easy-to-use functions support testing and diagnostics, e.g.online/offline diagnostics• "Forcing" of inputs and outputs during testing and diagnostics:Inputs and outputs can be set independently of cycle and thuspermanently, for example, to test the user program• Motion Control in accordance with PLCopen for simple movements• Library functionality■ ProgrammingThe STEP 7 Basic programming package permits complete programmingof all S7-1200 controllers and the associated I/O.■ Technical specifications6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayProduct versionassociated programming package STEP 7 Basic V10.5 STEP 7 Basic V10.5 STEP 7 Basic V10.5Supply voltagesRated value• 24 V DC Yes Yes• permissible range, lower limit (DC) 20.4 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 V• 120 V ACYes• 230 V ACYes• permissible range, lower limit (AC) 85 V• permissible range, upper limit (AC) 264 V• permissible frequency range, lower limit 47 Hz• permissible frequency range, upper limit 63 HzLoad voltage L+• Rated value (DC) 24 V 24 V• permissible range, lower limit (DC) 20.4 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 VCurrent consumptionCurrent consumption (rated value)60 mA at 120 V AC300 mA; Typical 300 mA; Typical30 mA at 240 V ACCurrent consumption, max.180 mA at 120 V AC0.9 A; 24 V DC 0.9 A; 24 V DC90 mA at 240 V ACInrush current, max. 20 A; at 264 V 12 A; 28.8 V DC 12 A; 28.8 V DCCurrent output to backplane bus (DC 5 V),max.Power loss750 mA;5 V DC max. for SM and CM750 mA;5 V DC max. for SM and CMPower loss, typ. 10 W 8W 8WMemoryAvailable project memory/user memory 25 kbyte 25 kbyte 25 kbyte750 mA;5 V DC max. for SM and CM4/6 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1211C■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayWork memory• integrated 25 kbyte 25 kbyte 25 kbyte• expandable No No NoLoad memory• integrated 1 Mbyte 1 Mbyte 1 Mbyte• expandable24 Mbyte;with SIEMENS Memory Card24 Mbyte;with SIEMENS Memory Card24 Mbyte;with SIEMENS Memory Card4Backup• presentYes; entire project maintenancefreein the integral EEPROMYes; entire project maintenancefreein the integral EEPROMYes; entire project maintenancefreein the integral EEPROM• without battery Yes Yes YesCPU/ blocksNumber of blocks (total)DBs, FCs, FBs, counters, timers).DBs, FCs, FBs, counters, tim-DBs, FCs, FBs, counters, tim-Up to 65,535 blocks can be ers). Up to 65,535 blocks can be ers). Up to 65,535 blocks can beaddressed. There is no limit, useof the entire work memoryaddressed. There is no limit, useof the entire work memoryaddressed. There is no limit, useof the entire work memoryOB• Number, max. Limited only by RAM for code Limited only by RAM for code Limited only by RAM for codeCPU/ processing timesfor bit operations, min. 0.1 µs; / instruction 0.1 µs; / instruction 0.1 µs; / instructionfor word operations, min. 12 µs; / instruction 12 µs; / instruction 12 µs; / instructionfor floating point arithmetic, min. 18 µs; / instruction 18 µs; / instruction 18 µs; / instructionData areas and their retentivityretentive data area in total (incl. times, 2 048 byte 2 048 byte 2048bytecounters, flags), max.Flag• Number, max.4 kbyte; Size of bit memoryaddress area4 kbyte; Size of bit memoryaddress areaAddress areaI/O address area• I/O address area, overall 1024 bytes for inputs /1024 bytes for inputs /1024 bytes for outputs1024 bytes for outputs• overall 1 024 byte 1 024 byte 1024byte•Outputs 1 024 byte 1 024 byte 1024byteProcess image• Inputs, adjustable 1kbyte 1kbyte 1kbyte• Outputs, adjustable 1kbyte 1kbyte 1kbyteDigital channels• integrated channels (DI) 6 6 6• integrated channels (DO) 4 4 4Analog channels• Integrated channels (AI) 2 2 2• Integrated channels (AO) 0 0 0Hardware configurationNumber of modules per system, max. 3 communication modules, 3 communication modules,1 signal board1 signal board4 kbyte; Size of bit memoryaddress area1024 bytes for inputs /1024 bytes for outputs3 communication modules,1 signal boardSiemens ST 70 N · 20104/7

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1211C4■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayTime of dayClock• Hardware clock (real-time clock) Yes Yes Yes• Backup time 240 h; Typical 240 h; Typical 240 h; Typical• Deviation per day, max. 60 s/month at 25°C 60 s/month at 25°C 60 s/month at 25°CTest commissioning functionsStatus/control• Status/control variable Yes Yes Yes•VariablesInputs/outputs, memory bits,DB, distributed I/Os, timers,countersInputs/outputs, memory bits,DB, distributed I/Os, timers,countersInputs/outputs, memory bits,DB, distributed I/Os, timers,countersForcing• Forcing Yes Yes YesCommunication functionsS7 communication• supported Yes Yes Yes• as server Yes Yes YesOpen IE communication• TCP/IP Yes Yes Yes• ISO-on-TCP (RFC1006) Yes Yes YesNumber of connections• overall 15; dynamically 15; dynamically 15; dynamically1st interfaceType of interface PROFINET PROFINET PROFINETPhysics Ethernet Ethernet EthernetIsolated Yes Yes Yesautomatic detection of transmission speed Yes Yes YesAutonegotiation Yes Yes YesAutocrossover Yes Yes YesCPU/ programmingConfiguration software• STEP 7 STEP 7 Basic V10.5 STEP 7 Basic V10.5 STEP 7 Basic V10.5Programming language•LAD Yes Yes Yes•FBD Yes Yes YesCycle time monitoring• can be set Yes Yes YesDigital inputsNumber of digital inputs 6; Integrated 6; Integrated 6; Integrated• of which, inputs usable for technological 3; HSC (High Speed Counting) 3; HSC (High Speed Counting) 3; HSC (High Speed Counting)functionsm/p-reading Yes Yes YesNumber of simultaneously controllable inputs• All mounting positions- Concurrently controllable inputs,up to 40 °C6 6 64/8 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1211C■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayInput voltage• Rated value, DC 24 V 24 V 24 V• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA• for signal "1" 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mAInput current• for signal "1", typ. 1mA 1mA 1mAInput delay (for rated value of input voltage)• for standard inputs- parameterizable 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms, selectable in 4 groups0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms, selectable in groups offour- at "0" to "1", min. 0.2 ms 0.2 ms 0.2 ms- at "0" to "1", max. 12.8 ms 12.8 ms 12.8 ms• for interrupt inputs- parameterizable Yes Yes Yes• for counter/technological functions- parameterizable Single phase : 3 at 100 kHz,differential: 3 at 80 kHzCable length• Cable length, shielded, max.500 m; 50 m for technologicalfunctions• Cable length unshielded, max. 300 m;For technological functions: NoDigital outputsSingle phase : 3 at 100 kHz,differential: 3 at 80 kHz500 m; 50 m for technologicalfunctions300 m;For technological functions: No0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms, selectable in 4 groupsSingle phase : 3 at 100 kHz,differential: 3 at 80 kHz500 m; 50 m for technologicalfunctions300 m;For technological functions: NoNumber of digital outputs 4; Relay 4 4; Relay• of which high-speed outputs2; 100 kHz Pulse Train OutputShort-circuit protection No; to be provided externally No; to be provided externally No; to be provided externallyLimitation of inductive shutdown voltage to L+ (-48 V)Switching capacity of the outputs• with resistive load, max. 2A 0.5 A 2A• on lamp load, max. 30 W DC; 200 W AC 5W 30 W DC; 200 W ACOutput voltage• for signal "0" (DC), max.0.1 V; with 10k ohms load• for signal "1", min.20 VOutput current• for signal "1" rated value0.5 A• for signal "0" residual current, max.0.1 mAOutput delay with resistive load• 0 to "1", max. 10 ms; max. 1 µs; max. 10 ms; max.• 1 to "0", max. 10 ms; max. 5 µs; max. 10 ms; max.Parallel switching of 2 outputs• for increased power No NoSwitching frequency• of the pulse outputs, with resistive load, max. 1Hz 100 kHz 1HzCable length• Cable length, shielded, max. 500 m 500 m 500 m• Cable length unshielded, max. 150 m 150 m 150 m4Siemens ST 70 N · 20104/9

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1211C4■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayRelay outputsNumber of relay outputs 4 4Number of operating cyclesmechanically 10 million,at rated load voltage 100,000mechanically 10 million,at rated load voltage 100,000Analog inputsNumber of analog inputs 2 2 2Number of analog inputs for voltage/current 2 2measurementCable length, shielded, max. 100 m; twisted and shielded 100 m; twisted and shielded 100 m; twisted and shieldedInput ranges•Voltage Yes Yes YesInput ranges (rated values), voltages• 0 to +10 V Yes Yes Yes• Input resistance (0 to 10 V) ≥100k ohms ≥100k ohms ≥100k ohmsAnalog value creationIntegrations and conversion time/resolution per channel• Resolution with overrange (bit including 10 bit 10 bit 10 bitsign), max.• Integration time, parameterizable Yes Yes Yes• Conversion time (per channel) 625 µs 625 µs 625 µsFormation of analog values(in isochronous mode)Cable length• Max. cable length, shielded 10 m; twisted 10 m; twisted 10 m; twistedEncoder supply24 V encoder supply• 24 Vpermissible range:20.4 to 28.8 Vpermissible range:20.4 to 28.8 Vpermissible range:20.4 to 28.8 VEncoderConnectable encoders• 2-wire BEROS Yes Yes YesIntegrated FunctionsNumber of counters 3 3 3Counter frequency (counter) max. 100 kHz 100 kHz 100 kHzFrequency meter Yes Yes Yescontrolled positioning Yes Yes YesPID controller Yes Yes YesNumber of alarm inputs 4 4 4Number of pulse outputs 2Limit frequency (pulse)100 kHzOperator control and monitoringDisplay• integrated No No NoGalvanic isolationGalvanic isolation digital inputs• Galvanic isolation digital inputs 500 V AC for 1 minute 500 V AC for 1 minute 500 V AC for 1 minute• between the channels, in groups of 1 1 14/10 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1211C■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayGalvanic isolation digital outputs• Galvanic isolation digital outputs Yes; Relays Yes Relays• between the channels No No No• between the channels, in groups of 1 1 1Permissible potential differencebetween different circuits500 V DC between 24 V DC and5 V DC500 V DC between 24 V DC and5 V DCEMCInterference immunity against discharge ofstatic electricity• Interference immunity against discharge Yes Yes Yesof static electricity acc. to IEC 61000-4-2- Test voltage with air discharge 8 kV 8 kV 8 kV- Test voltage with contact discharge 6 kV 6 kV 6 kVInterference immunity to cable-borne interference• on the supply lines acc. to IEC 61000-4-4 Yes Yes Yes• Interference immunity on signal lines acc. Yes Yes Yesto IEC 61000-4-4Immunity to surge voltages• on the supply lines acc. to IEC 61000-4-5 Yes Yes YesImmunity to conducted interference, inducedby high-frequency fields• Interference immunity against highfrequencyYes Yes Yesradiation acc. to IEC 61000-4-6Emission of radio interference in accordancewith EN 55 011• Emission of radio interferences acc. to Yes; Group 1 Yes; Group 1 Yes; Group 1EN 55 011 (limit class A)• Emission of radio interference acc. to Yes Yes YesEN 55 011 (limit class B)Climatic and mechanical conditions forstorage and transportClimatic conditions for storage and transport• Free fall- Max. height of fall (in packaging) 0.3 m; five times, in shippingpackage0.3 m; five times, in shippingpackage500 V DC between 24 V DC and5 V DC0.3 m; five times, in shippingpackage•Temperature- permissible temperature range -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C• Relative humidity- permissible range (without condensation)at 25 °C95% 95% 95%4Siemens ST 70 N · 20104/11

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1211C4■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayMechanical and climatic conditions duringoperationClimatic conditions during operation• Temperature- permissible temperature range 0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted95% rel. humidity, nocondensation0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted95% rel. humidity, nocondensation- permissible temperature change 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min• Atmospheric pressure acc. to IEC 60068-2-13- permissible atmospheric pressure 1080 ... 795 hPa 1080 ... 795 hPa 1080 ... 795 hPa- permissible operating altitude -1000m ... 2000m -1000m ... 2000m -1000m ... 2000m• Concentration of pollutants-SO 2 at RH < 60% without condensation < 0.5 ppm < 0.5 ppm < 0.5 ppm-H 2 S at RH < 60% without condensation < 0.1 ppm < 0.1 ppm < 0.1 ppmEnvironmental requirementsOperating temperature•min. 0°C 0°C 0°C• max. 55 °C 55 °C 55 °C• vertical installation, min. 0°C 0°C 0°C• vertical installation, max. 45 °C 45 °C 45 °C• horizontal installation, min. 0°C 0°C 0°C• horizontal installation, max. 55 °C 55 °C 55 °CStorage/transport temperature•min. -40 °C -40 °C -40 °C• max. 70 °C 70 °C 70 °CAir pressure• Operation, min. 795 hPa 795 hPa 795 hPa• Operation, max. 1 080 hPa 1 080 hPa 1 080 hPa• Storage/transport, min. 660 hPa 660 hPa 660 hPa• Storage/transport, max. 1 080 hPa 1 080 hPa 1 080 hPaRelative humidity• Operation, max. 95 %; no condensation 95 %; no condensation 95 %; no condensationVibrations• Vibrations2g wall mounting,1g DIN rail2g wall mounting,1g DIN rail2g wall mounting,1g DIN rail• Operation, checked according toYes Yes YesIEC 60068-2-6Shock test• checked according to IEC 60068-2-27Yes; IEC 68, Part 2-27 half-sine:Strength of the shock 15 g (peakvalue), duration 11 msYes; IEC 68, Part 2-27 half-sine:Strength of the shock 15 g (peakvalue), duration 11 msDegree of protectionIP20 Yes Yes YesStandards, approvals, certificatesCE mark Yes Yes YesC-TICK Yes Yes YescULus Yes Yes YesFM approval Yes Yes YesYes; IEC 68, Part 2-27 half-sine:Strength of the shock 15 g (peakvalue), duration 11 ms4/12 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1211C■ Technical specifications (continued)6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Product-type designation CPU 1211C AC/DC/Relay CPU 1211C DC/DC/DC CPU 1211C DC/DC/RelayDimensions and weightDimensions• Width 90 mm 90 mm 90 mm• Height 100 mm 100 mm 100 mm•Depth 75 mm 75 mm 75 mmWeight• Weight, approx. 420 g 370 g 380 g4■ Ordering data Order No. Order No.CPU 1211CCCompact CPU, AC/DC/relay;integrated program/data memory25 kbyte, load memory 1 Mbyte;wide-range power supply85 ... 264 V AC;Boolean execution times0.1 μs per operation;6 digital inputs, 4 digital outputs(relays), 2 analog inputs;expandable by up to3 communication modules and1 signal board;digital inputs can be used as HSCat 100 kHzCPU 1211CCCompact CPU, DC/DC/DC;integrated program/data memory25 kbyte, load memory 1 Mbyte;power supply 24 V DC;Boolean execution times 0.1 μsper operation;6 digital inputs, 4 digital outputs,2 analog inputs;expandable by up to3 communication modules and1 signal board;digital inputs can be used as HSCat 100 kHz,24 V DC digital outputs can beused as pulse outputs (PTO) orpulse-width modulated outputs(PWM) at 100 kHzCPU 1211CCCompact CPU, DC/DC/relay;integrated program/data memory25 kbyte, load memory 1 Mbyte;power supply 24 V DC;Boolean execution times 0.1 μsper operation;6 digital inputs, 4 digital outputs(relays), 2 analog inputs;expandable by up to3 communication modules and1 signal board;digital inputs can be used as HSCat 100 kHz6ES7 211-1BD30-0XB06ES7 211-1AD30-0XB06ES7 211-1HD30-0XB0C: Subject to export regulations: AL: N and ECCN: EAR99HAccessoriesSB 1221 signal board4 inputs, 5 V DC, 200 kHz C 6ES7 221-3AD30-0XB04 inputs, 24 V DC, 200 kHz C 6ES7 221-3BD30-0XB0SB 1222 signal board4 outputs, 5 V DC, 0.1 A, C 6ES7 222-1AD30-0XB0200 kHz4 outputs, 24 V DC, 0.1 A,200 kHzC 6ES7 222-1BD30-0XB0SB 1223 signal board2 inputs, 24 V DC, IEC type 1 C 6ES7 223-0BD30-0XB0active high;2 24 V DC transistor outputs,0.5 A, 5 W;can be used as HSC at up to30 kHz2 inputs, 5 V DC, 200 kHz C 6ES7 223-3AD30-0XB02 outputs 5 V DC, 0.1 A, 200 kHz2 inputs, 24 V DC, 200 kHz C 6ES7 223-3BD30-0XB02 outputs 24 V DC, 0.1 A, 200 kHzSB 1232 signal board C 6ES7 232-4HA30-0XB01 analog output, ±10 V with12 bits or 0 to 20 mA with 11 bitsSimulator (optional)8 input switches,C 6ES7 274-1XF30-0XA0for CPU 1211C / CPU 1212CSIMATIC Memory Card(optional)2 MB C 6ES7 954-8LB00-0AA024 MB 6ES7 954-8LF00-0AA0Terminal block (spare part)For CPU 1211/1212For DI, with 14 screws,C 6ES7 292-1AH30-0XA0tin-plated; 4 unitsFor DO, with 8 screws,C 6ES7 292-1AP30-0XA0tin-plated; 4 unitsFor AI, with 3 screws,tin-plated; 4 unitsC 6ES7 292-1BC30-0XA0Siemens ST 70 N · 20104/13

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1211C4■ Ordering data Order No. Order No.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99T D: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/14 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1212C■ Overview• The superior compact solution• With 14 integral input/outputs• Expandable by:- 1 signal board (SB)- 2 signal modules (SM)- Max. 3 communication modules (CM)4■ DesignThe compact CPU 1212C has:• 3 device versions with different power supply and controlvoltages• Integrated power supply either as wide-range AC or DCpower supply (85 to 264 V AC or 24 V DC)• Integrated 24 V encoder/load current supply:For direct connection of sensors and encoders. With 300 mAoutput current also for use as load power supply• 8 integrated digital inputs 24 V DC (current sinking/currentsourcing (IEC type 1 current sinking))• 6 integrated digital outputs, either 24 V DC or relay• 2 integrated analog inputs 0 to 10 V• 2 pulse outputs (PTO) with a frequency of up to 100 kHz• Pulse-width modulated outputs (PWM) with a frequency of upto 100 kHz• Integrated Ethernet interface (TCP/IP native, ISO-on-TCP)• 4 fast counters (3 with max. 100 kHz; 1 with max. 30 kHz), withparameterizable enable and reset inputs, can be used simultaneouslyas up and down counters with 2 separate inputs orfor connecting incremental encoders• Expansion by additional communication interfaces, e.g.RS485 or RS232• Expansion by analog or digital signals directly on the CPU viasignal board (with retention of CPU mounting dimensions)• Expansion by a wide range of analog and digital input andoutput signals via signal modules• Optional memory expansion (SIMATIC Memory Card)• PID controller with auto-tuning functionality• Integral real-time clock• Interrupt inputs:For extremely fast response to rising or falling edges of processsignals• Removable terminals on all modules• Simulator (optional):For simulating the integrated inputs and for testing the userprogramDevice versionsVersion Supply voltage Input voltage DI Output voltage DO Output current• DC/DC/DC 24 V DC 24 V DC 24 V DC 0.5 A, transistor• DC/DC/relay 24 V DC 24 V DC 5 … 30 V DC /5 … 250 V AC• AC/DC/relay 85 … 264 V AC 24 V DC 5 … 30 V DC /5 … 250 V AC2 A;30 W DC /200 W AC2 A;30 W DC /200 W ACSiemens ST 70 N · 20104/15

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1212C4■ Function• Comprehensive instruction set:A wide range of operations facilitate programming:- basic operations such as binary logic operations, result allocation,save, count, create times, load, transfer, compare,shift, rotate, create complement, call subprogram (with localvariables)- integral communication commands (e.g. USS protocol,Modbus RTU, S7 communication "T-Send/T-Receive" orFreeport)- user-friendly functions such as pulse-width modulation,pulse sequence function, arithmetic functions, floating pointarithmetic, PID closed-loop control, jump functions, loopfunctions and code conversions- mathematical functions, e.g. SIN, COS, TAN, LN, EXP• Counting:User-friendly counting functions in conjunction with the integratedcounters and special commands for high-speedcounters open up new application areas for the user• Interrupt processing:- edge-triggered interrupts (activated by rising or fallingedges of process signals on interrupt inputs) support a rapidresponse to process events.- time-triggered interrupts.- counter interrupts can be triggered when a setpoint isreached or when the direction of counting changes.- communication interrupts allow the rapid and easyexchange of information with peripheral devices such asprinters or bar code readers• Password protection• Test and diagnostics functions:Easy-to-use functions support testing and diagnostics, e.g.online/offline diagnostics• "Forcing" of inputs and outputs during testing and diagnostics:Inputs and outputs can be set independently of cycle and thuspermanently, for example, to test the user program• Motion Control in accordance with PLCopen for simple movements• Library functionality■ ProgrammingThe STEP 7 Basic programming package permits completeprogramming of all S7-1200 controllers and the associated I/O.■ Technical specifications6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayProduct versionassociated programming package STEP 7 Basic V10.5 STEP 7 Basic V10.5 STEP 7 Basic V10.5Supply voltagesRated value• 24 V DC Yes Yes• permissible range, lower limit (DC) 20.4 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 V• 120 V ACYes• 230 V ACYes• permissible range, lower limit (AC) 85 V• permissible range, upper limit (AC) 264 V• permissible frequency range, lower limit 47 Hz• permissible frequency range, upper limit 63 HzLoad voltage L+• Rated value (DC) 24 V 24 V 24 V• permissible range, lower limit (DC) 5V 20.4 V 5V• permissible range, upper limit (DC) 250 V 28.8 V 250 VCurrent consumptionCurrent consumption (rated value)80 mA at 120 V AC175 mA; Typical40 mA at 240 V ACCurrent consumption, max.240 mA at 120 V AC1.2 A; 24 V DC 1.2 A; 24 V DC120 mA at 240 V ACInrush current, max. 20 A; at 264 V 12 A; 28.8 VDC 12 A; At 28.8 VCurrent output to backplane bus (DC 5 V),max.Power loss1 000 mA;5 V DC max. for SM and CM1 000 mA;5 V DC max. for SM and CMPower loss, typ. 11 W 9W 9WMemoryAvailable project memory/user memory 25 kbyte 25 kbyte 25 kbyte1000mA;5 V DC max. for SM and CM4/16 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1212C■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayWork memory• integrated 25 kbyte 25 kbyte 25 kbyte• expandable No No NoLoad memory• integrated 1 Mbyte 1 Mbyte 1 Mbyte• expandableBackup• present24 Mbyte;with SIEMENS Memory CardYes; entire project maintenancefreein the integral EEPROM24 Mbyte;with SIEMENS Memory CardYes; entire project maintenancefreein the integral EEPROM24 Mbyte;with SIEMENS Memory CardYes; entire project maintenancefreein the integral EEPROM• without battery Yes Yes YesCPU/ blocksNumber of blocks (total)DBs, FCs, FBs, counters, timers).DBs, FCs, FBs, counters, tim-DBs, FCs, FBs, counters, tim-Up to 65,535 blocks can be ers). Up to 65,535 blocks can be ers). Up to 65,535 blocks can beaddressed. There is no limit, useof the entire work memoryaddressed. There is no limit, useof the entire work memoryaddressed. There is no limit, useof the entire work memoryOB• Number, max. Limited only by RAM for code Limited only by RAM for code Limited only by RAM for codeCPU/ processing timesfor bit operations, min. 0.1 µs; / instruction 0.1 µs; / instruction 0.1 µs; / instructionfor word operations, min. 12 µs; / instruction 12 µs; / instruction 12 µs; / instructionfor floating point arithmetic, min. 18 µs; / instruction 18 µs; / instruction 18 µs; / instructionData areas and their retentivityretentive data area in total (incl. times, 2 048 byte 2 048 byte 2048bytecounters, flags), max.Flag• Number, max.4 kbyte; Size of bit memoryaddress area4 kbyte; Size of bit memoryaddress areaAddress areaI/O address area• I/O address area, overall 1024 bytes for inputs /1024 bytes for inputs /1024 bytes for outputs1024 bytes for outputs• overall 1 024 byte 1 024 byte 1024byte•Outputs 1 024 byte 1 024 byte 1024byteProcess image• Inputs, adjustable 1kbyte 1kbyte 1kbyte• Outputs, adjustable 1kbyte 1kbyte 1kbyteDigital channels• integrated channels (DI) 8 8 8• integrated channels (DO) 6 6 6Analog channels• Integrated channels (AI) 2 2 2• Integrated channels (AO) 0 0 0Hardware configurationNumber of modules per system, max.4 kbyte; Size of bit memoryaddress area1024 bytes for inputs /1024 bytes for outputs3 communication modules, 3 communication modules, 3 communication modules,1 signal board, 2 signal modules 1 signal board, 2 signal modules 1 signal board, 2 signal modules4Siemens ST 70 N · 20104/17

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1212C4■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayTime of dayClock• Hardware clock (real-time clock) Yes Yes Yes• Backup time 240 h; Typical 240 h; Typical 240 h; Typical• Deviation per day, max. 60 s/month at 25°C 60 s/month at 25°C 60 s/month at 25°CTest commissioning functionsStatus/control• Status/control variable Yes Yes Yes•VariablesInputs/outputs, memory bits,DB, distributed I/Os, timers,countersInputs/outputs, memory bits,DB, distributed I/Os, timers,countersInputs/outputs, memory bits,DB, distributed I/Os, timers,countersForcing• Forcing Yes Yes YesCommunication functionsS7 communication• supported Yes Yes Yes• as server Yes Yes YesOpen IE communication• TCP/IP Yes Yes Yes• ISO-on-TCP (RFC1006) Yes Yes YesNumber of connections• overall 15; dynamically 15; dynamically 15; dynamically1st interfaceType of interface PROFINET PROFINET PROFINETPhysics Ethernet Ethernet EthernetIsolated Yes Yes Yesautomatic detection of transmission speed Yes Yes YesAutonegotiation Yes Yes YesAutocrossover Yes Yes YesCPU/ programmingConfiguration software• STEP 7 STEP 7 Basic V10.5 STEP 7 Basic V10.5 STEP 7 Basic V10.5Programming language•LAD Yes Yes Yes•FBD Yes Yes YesCycle time monitoring• can be set Yes Yes YesDigital inputsNumber of digital inputs 8; Integrated 8; Integrated 8; Integrated• of which, inputs usable for technological 4; HSC (High Speed Counting) 4; HSC (High Speed Counting) 4; HSC (High Speed Counting)functionsm/p-reading Yes Yes YesNumber of simultaneously controllable inputs• All mounting positions- Concurrently controllable inputs,up to 40 °C8 8 84/18 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1212C■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayInput voltage• Rated value, DC 24 V 24 V 24 V• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA• for signal "1" 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mAInput current• for signal "1", typ. 1mA 1mA 1mAInput delay (for rated value of input voltage)• for standard inputs- parameterizable 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms, selectable in groups offour0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms, selectable in groups offour- at "0" to "1", min. 0.2 ms 0.2 ms 0.2 ms- at "0" to "1", max. 12.8 ms 12.8 ms 12.8 ms• for interrupt inputs- parameterizable Yes Yes Yes• for counter/technological functions- parameterizable Single phase : 3 at 100 kHz,1 at 30 kHzdifferential: 3 at 80 kHz,1 at 30 kHzCable length• Cable length, shielded, max.500 m; 50 m for technologicalfunctions• Cable length unshielded, max.300 m; For technological functions:NoDigital outputsSingle phase : 3 at 100 kHz,1 at 30 kHzdifferential: 3 at 80 kHz,1 at 30 kHz500 m; 50 m for technologicalfunctions300 m; For technological functions:No0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms, selectable in groups offourSingle phase : 3 at 100 kHz,1 at 30 kHzdifferential: 3 at 80 kHz,1 at 30 kHz500 m; 50 m for technologicalfunctions300 m; For technological functions:NoNumber of digital outputs 6; Relay 6 6; Relay• of which high-speed outputs2; 100 kHz Pulse Train OutputShort-circuit protection No; to be provided externally No; to be provided externally No; to be provided externallyLimitation of inductive shutdown voltage to L+ (-48 V)Switching capacity of the outputs• with resistive load, max. 2A 0.5 A 2A• on lamp load, max. 30 W DC; 200 W AC 5W 30 W DC; 200 W ACOutput voltage• for signal "0" (DC), max.0.1 V; with 10k ohms load• for signal "1", min.20 VOutput current• for signal "1" rated value0.5 A• for signal "0" residual current, max.0.1 mAOutput delay with resistive load• 0 to "1", max. 10 ms; max. 1µs 10 ms; max.• 1 to "0", max. 10 ms; max. 5µs 10 ms; max.Switching frequency• of the pulse outputs, with resistive load, max. 1Hz 100 kHz 1HzCable length• Cable length, shielded, max. 500 m 500 m 500 m• Cable length unshielded, max. 150 m 150 m 150 m4Siemens ST 70 N · 20104/19

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1212C4■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayRelay outputsNumber of relay outputs 6 6Number of operating cyclesmechanically 10 million, at ratedload voltage 100,000mechanically 10 million, at ratedload voltage 100,000Analog inputsNumber of analog inputs 2 2 2Cable length, shielded, max. 100 m; twisted and shielded 100 m; twisted and shielded 100 m; twisted and shieldedInput ranges•Voltage Yes Yes YesInput ranges (rated values), voltages• 0 to +10 V Yes Yes Yes• Input resistance (0 to 10 V) ≥100k ohms ≥100k ohms ≥100k ohmsAnalog value creationIntegrations and conversion time/ resolutionper channel• Resolution with overrange (bit including 10 bit 10 bit 10 bitsign), max.• Integration time, parameterizable Yes Yes Yes• Conversion time (per channel) 625 µs 625 µs 625 µsFormation of analog values(in isochronous mode)Cable length• Max. cable length, shielded 10 m; twisted 10 m; twisted 10 m; twistedEncoder supply24 V encoder supply• 24 Vpermissible range:20.4 to 28.8 Vpermissible range:20.4 to 28.8 Vpermissible range:20.4 to 28.8 VEncoderConnectable encoders• 2-wire BEROS Yes Yes YesIntegrated FunctionsNumber of counters 4 4 4Counter frequency (counter) max. 100 kHz 100 kHz 100 kHzFrequency meter Yes Yes Yescontrolled positioning Yes Yes YesPID controller Yes Yes YesNumber of alarm inputs 4 4 4Number of pulse outputs 2Limit frequency (pulse)100 kHzOperator control and monitoringDisplay• integrated No No NoGalvanic isolationGalvanic isolation digital inputs• Galvanic isolation digital inputs 500 V AC for 1 minute 500 V AC for 1 minute 500 V AC for 1 minute• between the channels, in groups of 1 1 14/20 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1212C■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayGalvanic isolation digital outputs• Galvanic isolation digital outputs Yes; Relays Yes Relays• between the channels No No No• between the channels, in groups of 2 2 1Permissible potential differencebetween different circuits500 V DC between 24 V DC and5 V DC500 V DC between 24 V DC and5 V DCEMCInterference immunity against discharge ofstatic electricity• Interference immunity against discharge of Yes Yes Yesstatic electricity acc. to IEC 61000-4-2- Test voltage with air discharge 8 kV 8 kV 8 kV- Test voltage with contact discharge 6 kV 6 kV 6 kVInterference immunity to cable-borneinterference• on the supply lines acc. to IEC 61000-4-4 Yes Yes Yes• Interference immunity on signal lines acc. Yes Yes Yesto IEC 61000-4-4Immunity to surge voltages• on the supply lines acc. to IEC 61000-4-5 Yes Yes YesImmunity to conducted interference,induced by high-frequency fields• Interference immunity against highfrequencyYes Yes Yesradiation acc. to IEC 61000-4-6Emission of radio interference in accordancewith EN 55 011• Emission of radio interferences acc. to Yes; Group 1 Yes; Group 1 Yes; Group 1EN 55 011 (limit class A)• Emission of radio interference acc. to Yes Yes YesEN 55 011 (limit class B)Climatic and mechanical conditions forstorage and transportClimatic conditions for storage and transport• Free fall- Max. height of fall (in packaging) 0.3 m; five times,in shipping package0.3 m; five times,in shipping package500 V DC between 24 V DC and5 V DC0.3 m; five times,in shipping package• Temperature- permissible temperature range -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C• Relative humidity- permissible range (without condensation)at 25 °C95% 95% 95%4Siemens ST 70 N · 20104/21

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1212C4■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayMechanical and climatic conditions duringoperationClimatic conditions during operation• Temperature- permissible temperature range 0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted- permissible temperature change 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min• Atmospheric pressure acc. to IEC 60068-2-13- permissible atmospheric pressure 1080 ... 795 hPa 1080 ... 795 hPa 1080 ... 795 hPa- permissible operating altitude -1000m ... 2000m -1000m ... 2000m -1000m ... 2000m• Concentration of pollutants-SO 2 at RH < 60% without condensation < 0.5 ppm < 0.5 ppm < 0.5 ppm-H 2 S at RH < 60% without condensation < 0.1 ppm < 0.1 ppm < 0.1 ppmEnvironmental requirementsOperating temperature•Min. 0°C 0°C 0°C• max. 55 °C 55 °C 55 °C• vertical installation, min. 0°C 0°C 0°C• vertical installation, max. 45 °C 45 °C 45 °C• horizontal installation, min. 0°C 0°C 0°C• horizontal installation, max. 55 °C 55 °C 55 °CStorage/transport temperature•Min. -40 °C -40 °C -40 °C• max. 70 °C 70 °C 70 °CAir pressure• Operation, min. 795 hPa 795 hPa 795 hPa• Operation, max. 1 080 hPa 1 080 hPa 1 080 hPa• Storage/transport, min. 660 hPa 660 hPa 660 hPa• Storage/transport, max. 1 080 hPa 1 080 hPa 1 080 hPaRelative humidity• Operation, max. 95 %; no condensation 95 %; no condensation 95 %; no condensationVibrations• Vibrations2g panel mount,1g DIN rail mount2g panel mount,1g DIN rail mount2g panel mount,1g DIN rail mount• Operation, checked according toYes Yes YesIEC 60068-2-6Shock test• checked according to IEC 60068-2-27Yes; 15 G, 11 ms pulse,6 shocks in each of 3 axesYes; 15 G, 11 ms pulse,6 shocks in each of 3 axesDegree of protectionIP20 Yes Yes YesStandards, approvals, certificatesCE mark Yes Yes YesC-TICK Yes Yes YescULus Yes Yes YesFM approval Yes Yes YesYes; 15 G, 11 ms pulse,6 shocks in each of 3 axes4/22 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1212C■ Technical specifications (continued)6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Product-type designation CPU 1212C AC/DC/Relay CPU 1212C DC/DC/DC CPU 1212C AC/DC/RelayDimensions and weightDimensions• Width 90 mm 90 mm 90 mm• Height 100 mm 100 mm 100 mm•Depth 75 mm 75 mm 75 mmWeight• Weight, approx. 425 g 370 g 385 g4■ Ordering data Order No. Order No.CPU 1212CCCompact CPU, AC/DC/relay;integral program/data memory25 kbyte, load memory 1 Mbyte;wide-range power supply85 ... 264 V AC;Boolean execution times 0.1 μsper operation;8 digital inputs, 6 digital outputs(relays), 2 analog inputs;expandable by up to3 communication modules,2 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHzCPU 1212CCCompact CPU, DC/DC/DC;integrated program/data memory25 kbyte, load memory 1 Mbyte;power supply 24 V DC;Boolean execution times 0.1 μsper operation;8 digital inputs, 6 digital outputs,2 analog inputs;expandable by up to3 communication modules,2 signal modules, and 1 signalboard;digital inputs can be used as HSCat 100 kHz,24 V DC digital outputs can beused as pulse outputs (PTO) orpulse-width modulated outputs(PWM) at 100 kHzCPU 1212CCCompact CPU, DC/DC/relay;integrated program/data memory25 kbyte, load memory 1 Mbyte;power supply 24 V DC;Boolean execution times 0.1 μsper operation;8 digital inputs, 6 digital outputs(relays), 2 analog inputs;expandable by up to3 communication modules,2 signal modules, and 1 signalboard;digital inputs can be used as HSCat 100 kHz6ES7 212-1BD30-0XB06ES7 212-1AD30-0XB06ES7 212-1HD30-0XB0AccessoriesSB 1221 signal board4 inputs, 5 V DC, 200 kHz C 6ES7 221-3AD30-0XB04 inputs, 24 V DC, 200 kHz C 6ES7 221-3BD30-0XB0SB 1222 signal board4 outputs, 5 V DC, 0.1 A, C 6ES7 222-1AD30-0XB0200 kHz4 outputs, 24 V DC, 0.1 A, C 6ES7 222-1BD30-0XB0200 kHzSB 1223 signal board2 inputs, 24 V DC, IEC type 1 C 6ES7 223-0BD30-0XB0active high;2 24 V DC transistor outputs,0.5 A, 5 W;can be used as HSC at up to30 kHz2 inputs, 5 V DC, 200 kHz C 6ES7 223-3AD30-0XB02 outputs 5 V DC, 0.1 A, 200 kHz2 inputs, 24 V DC, 200 kHz C 6ES7 223-3BD30-0XB02 outputs 24 V DC, 0.1 A, 200 kHzSB 1232 signal board C 6ES7 232-4HA30-0XB01 analog output, ±10 V with12 bits or 0 to 20 mA with 11 bitsSimulator (optional) see CPU 1211C, page 4/13SIMATIC Memory Card(optional)2 MB C 6ES7 954-8LB00-0AA024 MB 6ES7 954-8LF00-0AA0Extension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules;length 2 mStarter box CPU 1212C B 6ES7 212-1BD30-4YB0AC/DC/relayComplete offer SIMATIC S7-1200,starter box, comprising:CPU 1212C AC/DC/relay, simulator,STEP 7 BASIC CD, manualCD, info material, in SystainerTerminal block (spare part) see CPU 1211C, page 4/13B: Subject to export regulations: AL: N and ECCN: EAR99T C: Subject to export regulations: AL: N and ECCN: EAR99HSiemens ST 70 N · 20104/23

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1212C4■ Ordering data Order No. Order No.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99T D: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/24 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1214C■ Overview• The compact high-performance CPU• With 24 integral input/outputs• Expandable by:- 1 signal board (SB)- 8 signal modules (SM)- max. 3 communication modules (CM)4■ DesignThe compact CPU 1214C has:• 3 device versions with different power supply and control voltages• Integrated power supply either as wide-range AC or DCpower supply (85 to 264 V AC or 24 V DC)• Integrated 24 V encoder/load current supply:For direct connection of sensors and encoders. With 400 mA,the output current can also be used as load power supply• 14 integrated digital inputs 24 V DC (current sinking/currentsourcing (IEC type 1 current sinking))• 10 integrated digital outputs, either 24 V DC or relay• 2 integrated analog inputs 0 to 10 V• 2 pulse outputs (PTO) with a frequency of up to 100 kHz• Pulse-width modulated outputs (PWM) with a frequency of upto 100 kHz• Integrated Ethernet interface (TCP/IP native, ISO-on-TCP)• 6 fast counters (3 with max. 100 kHz; 3 with max. 30 kHz), withparameterizable enable and reset inputs, can be used simultaneouslyas up and down counters with 2 separate inputs orfor connecting incremental encoders• Expansion by additional communication interfaces, e.g.RS485 or RS232• Expansion by analog or digital signals directly on the CPU viasignal board (with retention of CPU mounting dimensions)• Expansion by a wide range of analog and digital input andoutput signals via signal modules• Optional memory expansion (SIMATIC Memory Card)• PID controller with auto-tuning functionality• Integral real-time clock• Interrupt inputs:For extremely fast response to rising or falling edges of processsignals• Removable terminals on all modules• Simulator (optional):For simulating the integrated inputs and for testing the userprogramDevice versionsVersion Supply voltage Input voltage DI Output voltage DO Output current• DC/DC/DC 24 V DC 24 V DC 24 V DC 0.5 A, transistor• DC/DC/relay 24 V DC 24 V DC 5 … 30 V DC /5 … 250 V AC• AC/DC/relay 85 … 264 V AC 24 V DC 5 … 30 V DC /5 … 250 V AC2 A;30 W DC /200 W AC2 A;30 W DC /200 W ACSiemens ST 70 N · 20104/25

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1214C4■ Function• Comprehensive instruction set:A wide range of operations facilitate programming:- basic operations such as binary logic operations, result allocation,save, count, create times, load, transfer, compare,shift, rotate, create complement, call subprogram (with localvariables)- integral communication commands (e.g. USS protocol,Modbus RTU, S7 communication "T-Send/T-Receive" or Freeport)- user-friendly functions such as pulse-width modulation,pulse sequence function, arithmetic functions, floating pointarithmetic, PID closed-loop control, jump functions, loopfunctions and code conversions- mathematical functions, e.g. SIN, COS, TAN, LN, EXP• Counting:User-friendly counting functions in conjunction with the integratedcounters and special commands for high-speedcounters open up new application areas for the user• Interrupt processing:- edge-triggered interrupts (activated by rising or fallingedges of process signals on interrupt inputs) support a rapidresponse to process events- time-triggered interrupts- counter interrupts can be triggered when a setpoint isreached or when the direction of counting changes- communication interrupts allow the rapid and easy exchangeof information with peripheral devices such as printersor bar code readers• Password protection• Test and diagnostics functions:Easy-to-use functions support testing and diagnostics, e.g.online/offline diagnostics• "Forcing" of inputs and outputs during testing and diagnostics:Inputs and outputs can be set independently of cycle and thuspermanently, for example, to test the user program• Motion Control in accordance with PLCopen for simple movements• Library functionality■ ProgrammingThe STEP 7 Basic programming package permits complete programmingof all S7-1200 controllers and the associated I/O.■ Technical specifications6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayProduct versionassociated programming package STEP 7 Basic V10.5 STEP 7 Basic V10.5 STEP 7 Basic V10.5Supply voltagesRated value• 24 V DC Yes Yes• permissible range, lower limit (DC) 20.4 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 V• 120 V ACYes• 230 V ACYes• permissible range, lower limit (AC) 85 V• permissible range, upper limit (AC) 264 V• permissible frequency range, lower limit 47 Hz• permissible frequency range, upper limit 63 HzLoad voltage L+• Rated value (DC) 24 V 24 V 24 V• permissible range, lower limit (DC) 5V 20.4 V 5V• permissible range, upper limit (DC) 250 V 28.8 V 250 VCurrent consumptionCurrent consumption (rated value)100 mA at 120 VAC500 mA; Typical50 mA at 240 VACCurrent consumption, max.300 mA at 120 VAC1.5 A; 24 VDC 1.2 A; 24 VDC150 mA at 240 VACInrush current, max. 20 A; at 264 V 12 A; at 28.8 V 12 A; at 28.8 VCurrent output to backplane bus (DC 5 V),max.Power loss1 600 mA;5 V DC max. for SM and CM1 600 mA;5 V DC max. for SM and CMPower loss, typ. 14 W 12 W 12 WMemoryAvailable project memory/user memory 50 Kibyte 50 Kibyte 50 Kibyte1600mA;5 V DC max. for SM and CM4/26 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1214C■ Technical specifications (continued)6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayWork memory• integrated 50 kbyte 50 kbyte 50 kbyte• expandable No No NoLoad memory• integrated 2 Mbyte 2 Mbyte 2 Mbyte• expandableBackup• present24 Mbyte;with SIEMENS Memory CardYes; entire project maintenancefreein the integral EEPROM24 Mbyte;with SIEMENS Memory CardYes; entire project maintenancefreein the integral EEPROM24 Mbyte;with SIEMENS Memory CardYes; entire project maintenancefreein the integral EEPROM• without battery Yes Yes YesCPU/ blocksNumber of blocks (total)DBs, FCs, FBs, counters, timers).DBs, FCs, FBs, counters, tim-DBs, FCs, FBs, counters, tim-Up to 65,535 blocks can be ers). Up to 65,535 blocks can be ers). Up to 65,535 blocks can beaddressed. There is no limit, useof the entire work memoryaddressed. There is no limit, useof the entire work memoryaddressed. There is no limit, useof the entire work memoryOB• Number, max. Limited only by RAM for code Limited only by RAM for code Limited only by RAM for codeCPU/ processing timesfor bit operations, min. 0.1 µs; / instruction 0.1 µs; / instruction 0.1 µs; / instructionfor word operations, min. 12 µs; / instruction 12 µs; / instruction 12 µs; / instructionfor floating point arithmetic, min. 18 µs; / instruction 18 µs; / instruction 18 µs; / instructionData areas and their retentivityretentive data area in total2 048 byte 2 048 byte 2048byte(incl. times, counters, flags), max.Flag• Number, max.8 kbyte; Size of bit memoryaddress area8 kbyte; Size of bit memoryaddress areaAddress areaI/O address area• I/O address area, overall 1024 bytes for inputs /1024 bytes for inputs /1024 bytes for outputs1024 bytes for outputs• overall 1 024 byte 1 024 byte 1024byte•Outputs 1 024 byte 1 024 byte 1024byteProcess image• Inputs, adjustable 1kbyte 1kbyte 1kbyte• Outputs, adjustable 1kbyte 1kbyte 1kbyteDigital channels• integrated channels (DI) 14 14 14• integrated channels (DO) 10 10 10Analog channels• Integrated channels (AI) 2 2 2• Integrated channels (AO) 0 0 0Hardware configurationNumber of modules per system, max.8 kbyte; Size of bit memoryaddress area1024 bytes for inputs /1024 bytes for outputs3 comm. modules,3 comm. modules,3 comm. modules,1 signal board, 8 signal modules 1 signal board, 8 signal modules 1 signal board, 8 signal modules4Siemens ST 70 N · 20104/27

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1214C4■ Technical specifications (continued)6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayTime of dayClock• Hardware clock (real-time clock) Yes Yes Yes• Backup time 240 h; Typical 240 h; Typical 240 h; Typical• Deviation per day, max. 60 s/month at 25°C 60 s/month at 25°C 60 s/month at 25°CTest commissioning functionsStatus/control• Status/control variable Yes Yes Yes•VariablesInputs/outputs, memory bits,DB, distributed I/Os, timers,countersInputs/outputs, memory bits,DB, distributed I/Os, timers,countersInputs/outputs, memory bits,DB, distributed I/Os, timers,countersForcing• Forcing Yes Yes YesCommunication functionsS7 communication• supported Yes Yes Yes• as server Yes Yes YesOpen IE communication• TCP/IP Yes Yes Yes• ISO-on-TCP (RFC1006) Yes Yes YesNumber of connections• overall 15; dynamically 15; dynamically 15; dynamically1st interfaceType of interface PROFINET PROFINET PROFINETPhysics Ethernet Ethernet EthernetIsolated Yes Yes Yesautomatic detection of transmission speed Yes Yes YesAutonegotiation Yes Yes YesAutocrossover Yes Yes YesCPU/ programmingConfiguration software• STEP 7 STEP 7 Basic V10.5 STEP 7 Basic V10.5 STEP 7 Basic V10.5Programming language•LAD Yes Yes Yes•FBD Yes Yes YesCycle time monitoring• can be set Yes Yes YesDigital inputsNumber of digital inputs 14; Integrated 14; Integrated 14; Integrated• of which, inputs usable for technological 6; HSC (High Speed Counting) 6; HSC (High Speed Counting) 6; HSC (High Speed Counting)functionsm/p-reading Yes Yes YesNumber of simultaneously controllable inputs• Mounting position- Concurrently controllable inputs,up to 40 °C14 14 144/28 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1214C■ Technical specifications (continued)6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayInput voltage• Rated value, DC 24 V 24 V 24 V• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA• for signal "1" 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mAInput current• for signal "1", typ. 1mA 1mA 1mAInput delay (for rated value of input voltage)• for standard inputs- parameterizable 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms,selectable in groups of four0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms,selectable in groups of four- at "0" to "1", min. 0.2 ms 0.2 ms 0.2 ms- at "0" to "1", max. 12.8 ms 12.8 ms 12.8 ms• for interrupt inputs- parameterizable Yes Yes Yes• for counter/technological functions- parameterizable Single phase : 3 at 100 kHz,3 at 30 kHzdifferential: 3 at 80 kHz,3 at 30 kHzCable length• Cable length, shielded, max.500 m; 50 m for technologicalfunctions• Cable length unshielded, max. 300 m;For technological functions: NoDigital outputsSingle phase : 3 at 100 kHz,3 at 30 kHzdifferential: 3 at 80 kHz,3 at 30 kHz500 m; 50 m for technologicalfunctions300 m;For technological functions: No0.2, 0.4, 0.8, 1.6, 3.2, 6.4, and12.8 ms,selectable in groups of fourSingle phase : 3 at 100 kHz,3 at 30 kHzdifferential: 3 at 80 kHz,3 at 30 kHz500 m; 50 m for technologicalfunctions300 m;For technological functions: NoNumber of digital outputs 10; Relay 10 10; Relay• of which high-speed outputs2; 100 kHz Pulse Train OutputShort-circuit protection No; to be provided externally No; to be provided externally No; to be provided externallyLimitation of inductive shutdown voltage to L+ (-48 V)Switching capacity of the outputs• with resistive load, max. 2A 0.5 A 2A• on lamp load, max. 30 W DC; 200 W AC 5W 30 W DC; 200 W ACOutput voltage• for signal "1", min.20 VOutput current• for signal "1" rated value0.5 A• for signal "0" residual current, max.0.1 mAOutput delay with resistive load• 0 to "1", max. 10 ms; max. 1µs 10 ms; max.• 1 to "0", max. 10 ms; max. 5µs 10 ms; max.Switching frequency• of the pulse outputs, with resistive load, max. 1Hz 100 kHz 1HzCable length• Cable length, shielded, max. 500 m 500 m 500 m• Cable length unshielded, max. 150 m 150 m 150 m4Siemens ST 70 N · 20104/29

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1214C4■ Technical specifications (continued)6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayRelay outputsNumber of relay outputs 10 10Number of operating cyclesmechanically 10 million,at rated load voltage 100,000mechanically 10 million,at rated load voltage 100,000Analog inputsNumber of analog inputs 2 2 2Cable length, shielded, max. 100 m; twisted and shielded 100 m; twisted and shielded 100 m; twisted and shieldedInput ranges•Voltage Yes Yes YesInput ranges (rated values), voltages• 0 to +10 V Yes Yes Yes• Input resistance (0 to 10 V) ≥100 kohms ≥100 kohms ≥100 kohmsAnalog value creationIntegrations and conversion time/resolution per channel• Resolution with overrange10 bit 10 bit 10 bit(bit including sign), max.• Integration time, parameterizable Yes Yes Yes• Conversion time (per channel) 625 µs 625 µs 625 µsFormation of analog values(in isochronous mode)Cable length• Max. cable length, shielded 10 m; twisted 10 m; twisted 10 m; twistedEncoder supply24 V encoder supply• 24 Vpermissible range:20.4 to 28.8 Vpermissible range:20.4 to 28.8 Vpermissible range:20.4 to 28.8 VEncoderConnectable encoders• 2-wire BEROS Yes Yes YesIntegrated FunctionsNumber of counters 6 6 6Counter frequency (counter) max. 100 kHz 100 kHz 100 kHzFrequency meter Yes Yes Yescontrolled positioning Yes Yes YesPID controller Yes Yes YesNumber of alarm inputs 4 4 4Number of pulse outputs 2Limit frequency (pulse)100 kHzOperator control and monitoringDisplay• integrated No No NoGalvanic isolationGalvanic isolation digital inputs• Galvanic isolation digital inputs 500 V AC for 1 minute 500 V AC for 1 minute 500 V AC for 1 minute• between the channels, in groups of 1 1 14/30 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1214C■ Technical specifications (continued)6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayGalvanic isolation digital outputs• Galvanic isolation digital outputs Relays Yes Relays• between the channels No No No• between the channels, in groups of 2 2 1Permissible potential differencebetween different circuits500 V DC between 24 V DC and5 V DC500 V DC between 24 V DC and5 V DCEMCInterference immunity against discharge ofstatic electricity• Interference immunity against discharge of Yes Yes Yesstatic electricity acc. to IEC 61000-4-2- Test voltage with air discharge 8 kV 8 kV 8 kV- Test voltage with contact discharge 6 kV 6 kV 6 kVInterference immunity to cable-borne interference• on the supply lines acc. to IEC 61000-4-4 Yes Yes Yes• Interference immunity on signal lines Yes Yes Yesacc. to IEC 61000-4-4Immunity to surge voltages• on the supply lines acc. to IEC 61000-4-5 Yes Yes YesImmunity to conducted interference, inducedby high-frequency fields• Interference immunity against high-frequencyYes Yes Yesradiation acc. to IEC 61000-4-6Emission of radio interference in accordancewith EN 55 011• Emission of radio interferences acc. to Yes; Group 1 Yes; Group 1 Yes; Group 1EN 55 011 (limit class A)• Emission of radio interference acc. to Yes Yes YesEN 55 011 (limit class B)Climatic and mechanical conditions forstorage and transportClimatic conditions for storage and transport• Free fall- Max. height of fall (in packaging) 0.3 m; five times,in shipping package0.3 m; five times,in shipping package500 V DC between 24 V DC and5 V DC0.3 m; five times,in shipping package• Temperature- permissible temperature range -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C• Relative humidity- permissible range (without condensation)at 25 °C95% 95% 95%4Siemens ST 70 N · 20104/31

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1214C4■ Technical specifications (continued)6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayMechanical and climatic conditions duringoperationClimatic conditions during operation• Temperature- permissible temperature range 0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted- permissible temperature change 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min• Atmospheric pressure acc. to IEC 60068-2-13- permissible atmospheric pressure 1080 ... 795 hPa 1080 ... 795 hPa 1080 ... 795 hPa- permissible operating altitude -1000m ... 2000m -1000m ... 2000m -1000m ... 2000m• Concentration of pollutants-SO 2 at RH < 60% without condensation < 0.5 ppm < 0.5 ppm < 0.5 ppm-H 2 S at RH < 60% without condensation < 0.1 ppm < 0.1 ppm < 0.1 ppmEnvironmental requirementsOperating temperature•Min. 0°C 0°C 0°C• max. 55 °C 55 °C 55 °C• vertical installation, min. 0°C 0°C 0°C• vertical installation, max. 45 °C 45 °C 45 °C• horizontal installation, min. 0°C 0°C 0°C• horizontal installation, max. 55 °C 55 °C 55 °CStorage/transport temperature•Min. -40 °C -40 °C -40 °C• max. 70 °C 70 °C 70 °CAir pressure• Operation, min. 795 hPa 795 hPa 795 hPa• Operation, max. 1 080 hPa 1 080 hPa 1 080 hPa• Storage/transport, min. 660 hPa 660 hPa 660 hPa• Storage/transport, max. 1 080 hPa 1 080 hPa 1 080 hPaRelative humidity• Operation, max. 95 %; no condensation 95 %; no condensation 95 %; no condensationVibrations• Vibrations2g panel mount,1g DIN rail mount2g panel mount,1g DIN rail mount2g panel mount,1g DIN rail mount• Operation, checked according toYes Yes YesIEC 60068-2-6Shock test• checked according to IEC 60068-2-27Yes; 15 g, 11 ms pulse,6 shocks in each of 3 axesYes; 15 g, 11 ms pulse,6 shocks in each of 3 axesDegree of protectionIP20 Yes Yes YesStandards, approvals, certificatesCE mark Yes Yes YesC-TICK Yes Yes YescULus Yes Yes YesFM approval Yes Yes YesYes; 15 g, 11 ms pulse,6 shocks in each of 3 axes4/32 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Central processing unitsCPU 1214C■ Technical specifications (continued)■ Ordering data Order No. Order No.C: Subject to export regulations: AL: N and ECCN: EAR99H6ES7 214-1BE30-0XB0 6ES7 214-1AE30-0XB0 6ES7 214-1HE30-0XB0Product-type designation CPU 1214C AC/DC/Relay CPU 1214C DC/DC/DC CPU 1214C DC/DC/RelayDimensions and weightDimensions• Width 110 mm 110 mm 110 mm• Height 100 mm 100 mm 100 mm•Depth 75 mm 75 mm 75 mmWeight• Weight, approx. 455 g 415 g 435 gCPU 1214CCCompact CPU, AC/DC/relay;integral program/data memory50 kbyte, load memory 2 Mbyte;wide-range power supply85 ... 264 V AC;Boolean execution times 0.1 μsper operation;14 digital inputs,10 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules,8 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHzCPU 1214CCCompact CPU, DC/DC/DC;integrated program/data memory50 kbyte, load memory 2 Mbyte;power supply 24 V DC;Boolean execution times 0.1 μsper operation;14 digital inputs,10 digital outputs,2 analog inputs;expandable by up to3 communication modules,8 signal modules, and 1 signalboard;digital inputs can be used as HSCat 100 kHz,24 V DC digital outputs can beused as pulse outputs (PTO) orpulse-width modulated outputs(PWM) at 100 kHzCPU 1214CCCompact CPU, DC/DC/relay;integrated program/data memory50 kbyte, load memory 2 Mbyte;power supply 24 V DC;Boolean execution times 0.1 μsper operation;14 digital inputs,10 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules,8 signal modules, and1 signal board;digital inputs can be used as HSCat 100 kHz6ES7 214-1BE30-0XB06ES7 214-1AE30-0XB06ES7 214-1HE30-0XB0AccessoriesSB 1221 signal board4 inputs, 5 V DC, 200 kHz C 6ES7 221-3AD30-0XB04 inputs, 24 V DC, 200 kHz C 6ES7 221-3BD30-0XB0SB 1222 signal board4 outputs, 5 V DC, 0.1 A, C 6ES7 222-1AD30-0XB0200 kHz4 outputs, 24 V DC, 0.1 A, C 6ES7 222-1BD30-0XB0200 kHzSB 1223 signal board2 inputs, 24 V DC, IEC type 1 C 6ES7 223-0BD30-0XB0active high;2 24 V DC transistor outputs,0.5 A, 5 W;can be used as HSC at up to30 kHz2 inputs, 5 V DC, 200 kHz C 6ES7 223-3AD30-0XB02 outputs 5 V DC, 0.1 A, 200 kHz2 inputs, 24 V DC, 200 kHz C 6ES7 223-3BD30-0XB02 outputs 24 V DC, 0.1 A, 200 kHzSB 1232 signal board C 6ES7 232-4HA30-0XB01 analog output, ±10 V with12 bits or 0 to 20 mA with 11 bitsSimulator (optional)14 input switches,C 6ES7 274-1XH30-0XA0for CPU 1214CSIMATIC Memory Card(optional)2 MB C 6ES7 954-8LB00-0AA024 MB 6ES7 954-8LF00-0AA0Extension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules;length 2 mTerminal block (spare part)For CPU 1214For DI, with 20 screws,C 6ES7 292-1AV30-0XA0tin-plated; 4 unitsFor DO, with 12 screws, C 6ES7 292-1AM30-0XA0tin-plated; 4 unitsFor AI, with 3 screws,tin-plated; 4 unitsC 6ES7 292-1BC30-0XA04Siemens ST 70 N · 20104/33

SIMATIC S7-1200Central processing units© Siemens AG 2010CPU 1214C4■ Ordering data Order No. Order No.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99T D: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/34 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200SIPLUS central processing unitsSIPLUS CPU 1211C, CPU 1212C, CPU 1214C■ Overview SIPLUS CPU 1211C• The clever compact solution• With 10 integral input/outputs• Expandable by:- 1 signal board (SB)- max. 3 communication modules (CM)For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuFor ordering information see page 4/38.4SIPLUS CPU 1211COrder No.6AG1 211-1BD30-5XB06AG1 211-1BD30-2XB06AG1 211-1BD30-5XB06AG1 211-1BD30-2XB06AG1 211-1HD30-5XB06AG1 211-1HD30-2XB0Order No. based on 6ES7 211-1BD30-0XB0 6ES7 211-1AD30-0XB0 6ES7 211-1HD30-0XB0Ambient temperature range -25 ... +55 °C/+70 °C; condensation permissibleAmbient conditionsResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2) activesubstances and compliant with ISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/4) or go towww.siemens.com/siplus-extremeTechnical dataThe technical data of the standard product apply with the exception of the environmental conditions.1) ISA -S71.04 severity level GX from October 2010Siemens ST 70 N · 20104/35

SIMATIC S7-1200SIPLUS central processing units© Siemens AG 2010SIPLUS CPU 1211C, CPU 1212C, CPU 1214C■ Overview SIPLUS CPU 1212C• The superior compact solution• With 14 integral input/outputs• Expandable by:- 1 signal board (SB)- 2 signal modules (SM)- Max. 3 communication modules (CM)For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku4For ordering information see page 4/38.SIPLUS CPU 1212COrder No.6AG1 212-1BD30-5XB06AG1 212-1BD30-2XB06AG1 212-1AD30-5XB06AG1 212-1AD30-2XB06AG1 212-1HD30-5XB06AG1 212-1HD30-2XB0Order No. based on 6ES7 212-1BD30-0XB0 6ES7 212-1AD30-0XB0 6ES7 212-1HD30-0XB0Ambient temperature range -25 ... +55 °C/+70 °C; condensation permissibleAmbient conditionsResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2) activesubstances and compliant with ISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/4) or go towww.siemens.com/siplus-extremeTechnical dataThe technical data of the standard product apply with the exception of the environmental conditions.1) ISA -S71.04 severity level GX from October 20104/36 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200SIPLUS central processing unitsSIPLUS CPU 1211C, CPU 1212C, CPU 1214C■ Overview SIPLUS CPU 1214C• The compact high-performance CPU• With 24 integral input/outputs• Expandable by:- 1 signal board (SB)- 8 signal modules (SM)- max. 3 communication modules (CM)For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuFor ordering information see page 4/38.4SIPLUS CPU 1214COrder No.6AG1 214-1BE30-5XB06AG1 214-1BE30-2XB06AG1 214-1AE30-5XB06AG1 214-1AE30-2XB06AG1 214-1HE30-5XB06AG1 214-1HE30-2XB0Order No. based on 6ES7 214-1BE30-0XB0 6ES7 212-1AE30-0XB0 6ES7 212-1HE30-0XB0Ambient temperature range -25 ... +55 °C/+70 °C; condensation permissibleAmbient conditionsResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2)active substances and compliant with ISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/4) or go towww.siemens.com/siplus-extremeTechnical dataThe technical data of the standard product apply with the exception of the environmental conditions.1) ISA -S71.04 severity level GX from October 2010Siemens ST 70 N · 20104/37

SIMATIC S7-1200SIPLUS central processing units© Siemens AG 2010SIPLUS CPU 1211C, CPU 1212C, CPU 1214C4■ Ordering data Order No. Order No.SIPLUS CPU 1211CCompact CPU, AC/DC/relay(extended temperature range andmedial exposure)Compact CPU, AC/DC/relay;integral program/data memory25 KB, load memory 1 MB;wide-range power supply85 ... 264 V AC;Boolean execution times 0.1 msper operation;6 digital inputs,4 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules and1 signal board;digital inputs can be used as HSCat 100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be usedSIPLUS CPU 1211CCompact CPU, DC/DC/DC(extended temperature range andmedial exposure)integral program/data memory25 KB, load memory 1 MB;power supply 24 V DC;Boolean execution times 0.1 msper operation;6 digital inputs,4 digital outputs,2 analog inputs;expandable by up to 3 communicationmodules, 2 signal modulesand 1 signal board;digital inputs can be used as HSCat 100 kHz, 24 V DC digitaloutputs can be used as pulseoutputs (PTO) or pulse-widthmodulated outputs (PWM) with100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be used6AG1 211-1BD30-2XB06AG1 211-1BD30-5XB06AG1 211-1AD30-2XB06AG1 211-1AD30-5XB0C: Subject to export regulations: AL: N and ECCN: EAR99HSIPLUS CPU 1211CCompact CPU, DC/DC/relay(extended temperature range andmedial exposure)integral program/data memory25 KB, load memory 1 MB;power supply 24 V DC;Boolean execution times 0.1 msper operation;6 digital inputs,4 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules and1 signal board;digital inputs can be used as HSCat 100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be usedSIPLUS CPU 1212CCompact CPU, AC/DC/relay(extended temperature range andmedial exposure)integral program/data memory25 KB, load memory 1 MB;wide-range power supply85 ... 264 V AC;Boolean execution times 0.1 msper operation;8 digital inputs,6 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules,2 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be used6AG1 211-1HD30-2XB06AG1 211-1HD30-5XB06AG1 212-1BD30-2XB06AG1 212-1BD30-5XB04/38 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200SIPLUS central processing unitsSIPLUS CPU 1211C, CPU 1212C, CPU 1214C■ Ordering data Order No. Order No.SIPLUS CPU 1212CCompact CPU, DC/DC/DC(extended temperature range andmedial exposure)integral program/data memory25 KB, load memory 1 MB;power supply 24 V DC;Boolean execution times 0.1 msper operation;8 digital inputs,6 digital outputs,2 analog inputs;expandable by up to3 communication modules,2 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHz, 24 V DC digital outputscan be used as pulse outputs(PTO) or pulse-widthmodulated outputs (PWM) with100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be usedSIPLUS CPU 1212CCompact CPU, DC/DC/relay(extended temperature range andmedial exposure)integral program/data memory25 KB, load memory 1 MB;power supply 24 V DC;Boolean execution times 0.1 msper operation;8 digital inputs,6 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules,2 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be used6AG1 212-1AD30-2XB06AG1 212-1AD30-5XB06AG1 212-1HD30-2XB06AG1 212-1HD30-5XB0SIPLUS CPU 1214CCompact CPU, AC/DC/relay(extended temperature range andmedial exposure)integral program/data memory50 KB, load memory 2 MB;wide-range power supply85 ... 264 V AC;Boolean execution times 0.1 msper operation;14 digital inputs,10 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules,8 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be usedSIPLUS CPU 1214CCompact CPU, DC/DC/DC(extended temperature range andmedial exposure)integral program/data memory50 KB, load memory 2 MB;power supply 24 V DC;Boolean execution times 0.1 msper operation;14 digital inputs,10 digital outputs,2 analog inputs;expandable by up to3 communication modules,8 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHz, 24 V DC digital outputscan be used as pulse outputs(PTO) or pulse-widthmodulated outputs (PWM) with100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be used6AG1 214-1BE30-2XB06AG1 214-1BE30-5XB06AG1 214-1AE30-2XB06AG1 214-1AE30-5XB04C: Subject to export regulations: AL: N and ECCN: EAR99HSiemens ST 70 N · 20104/39

SIMATIC S7-1200SIPLUS central processing units© Siemens AG 2010SIPLUS CPU 1211C, CPU 1212C, CPU 1214C4■ Ordering data Order No. Order No.SIPLUS CPU 1214CCompact CPU, DC/DC/relay(extended temperature range andmedial exposure)Compact CPU, DC/DC/relay;integral program/data memory50 KB, load memory 2 MB;power supply 24 V DC;Boolean execution times 0.1 msper operation;14 digital inputs,10 digital outputs (relays),2 analog inputs;expandable by up to3 communication modules,8 signal modules and 1 signalboard;digital inputs can be used as HSCat 100 kHz• Ambient temperatureC-25 ... +70 °C;number of simultaneouslycontrollable inputs and outputsmax. 50%;Signal Board cannot be used• Ambient temperatureC-25 ... +55 °C;without restrictions;Signal Board can be used6AG1 214-1HE30-2XB06AG1 214-1HE30-5XB0C: Subject to export regulations: AL: N and ECCN: EAR99HAccessoriessee S7-1200 CPUs,pages 4/13, 4/23, 4/334/40 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modules■ Overview• Digital inputs as supplement to the integral I/O of the CPUs• For flexible adaptation of the controller to the relevant task• For subsequent expansion of the system with additional inputsSM 1221 digital input module■ ApplicationDigital input modules allow the connection of the controller todigital signals of the process.This provides users with the following advantages:• Optimum adaptation:With signal modules which can be mixed as desired, userscan adapt their controllers exactly to the relevant task. Thisavoids superfluous investments. Modules with 8, 16, and 32input/output channels are available.• Flexibility:If the task is expanded subsequently, the controller can be upgraded.Updating of the user program is extremely simple.■ FunctionThe SM 1221 digital input signal modules convert the level of theexternal digital signals from the process into the internal signallevel of the S7-1200.4■ Technical specifications6ES7 221-1BF30-0XB0Product type designation SM 1221DI 8x24 V DCSupply voltagesRated value6ES7 221-1BH30-0XB0SM 1221DI 16x24 V DC• 24 V DC Yes Yes• permissible range, 20.4 V 20.4 Vlower limit (DC)• permissible range, 28.8 V 28.8 Vupper limit (DC)Power supply to the transmitters• present Yes YesCurrent consumptionfrom backplane bus 5 V DC, 105 mA 130 mAmax.Digital inputs• from load voltage L+ 4 mA; per channel 4 mA; per channel(without load), max.Power lossPower loss, typ. 1.5 W 2.5 WConnection methodrequired front connector Yes YesDigital inputsNumber of digital inputs 8 16• in groups of 2 4Number of simultaneouslycontrollable inputs• all mounting positions- Concurrently controllable 8 16inputs, up to 40 °C6ES7 221-1BF30-0XB0Product type designation SM 1221DI 8x24 V DCNumber of simultaneouslycontrollable inputs6ES7 221-1BH30-0XB0SM 1221DI 16x24 V DC• horizontal installation- up to 40 °C, max. 8 16- up to 50 °C, max. 8 16• vertical installation- up to 40 °C, max. 8 16Input characteristic curve YesYesacc. to IEC 1131, Type 1Input voltage• Rated value, DC 24 V 24 V• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA• for signal "1" 15 V DC at 2.5 mA 15 V DC at 2.5 mAInput current• for signal "0", max. 1mA1mA(permissible quiescentcurrent)• for signal "1", min. 2.5 mA 2.5 mA• for signal "1", typ. 4 mA; Typical 4 mA; TypicalInput delay (for rated valueof input voltage)• for standard inputs- parameterizable Yes; 0.2, 0.4, 0.8,1.6, 3.2, 6.4, and12.8 ms, selectablein groups of four• for interrupt inputs- parameterizable Yes YesYes; 0.2, 0.4, 0.8,1.6, 3.2, 6.4, and12.8 ms, selectablein groups of fourSiemens ST 70 N · 20104/41

SIMATIC S7-1200Digital modules© Siemens AG 20104SM 1221 digital input module■ Technical specifications (continued)6ES7 221-1BF30-0XB0Product type designation SM 1221DI 8x24 V DCCable length• Cable length, shielded,max.• Cable length unshielded,max.Digital outputs500 m 500 m300 m 300 mNumber of digital outputs 0 0Interrupts/diagnostics/status informationAlarms•Alarms Yes Yes• Diagnostic alarm Yes YesDiagnoses• Diagnostic functions Yes Yes• Monitoring the supply YesYesvoltage to the electronicsDiagnostics indication LED• for status of inputs Yes Yes• for maintenance Yes Yes• Status indicatorYesYesdigital input (green)Galvanic isolationGalvanic isolation digitalinputs• between the channels, in 2 4groups ofClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall(in packaging)• Temperature- permissible temperaturerange• Air pressure acc. toIEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °C0.3 m; five times,in shippingpackage6ES7 221-1BH30-0XB0SM 1221DI 16x24 V DC0.3 m; five times,in shippingpackage-40 °C ... +70 °C -40 °C ... +70 °C1080 to 660 hPa 1080 to 660 hPa95% 95%6ES7 221-1BF30-0XB0Product type designation SM 1221DI 8x24 V DCMechanical and climaticconditions duringoperationClimatic conditions duringoperation• Temperature- permissible temperaturerange- permissible temperaturechangeDegree of protection0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted5 °C ... 55 °C,3 °C/min6ES7 221-1BH30-0XB0SM 1221DI 16x24 V DC0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted5 °C ... 55 °C,3 °C/minIP20 Yes YesStandards, approvals,certificatesCE mark Yes YesC-TICK Yes YesFM approval Yes YesMechanicsType of housing (front)•Plastic Yes YesDimensions and weightDimensions• Width 45 mm 45 mm• Height 100 mm 100 mm•Depth 75 mm 75 mmWeight• Weight, approx. 170 g 210 g4/42 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modules■ Ordering dataOrder No.SM 1221 digital input signalmodule8 inputs, 24 V DC, isolated, C 6ES7 221-1BF30-0XB0current sourcing/sinking16 inputs, 24 V DC, isolated, C 6ES7 221-1BH30-0XB0current sourcing/sinkingAccessoriesExtension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules;length 2 mTerminal block (spare part)for 8/16-channel digital signalmoduleswith 7 screws, zinc-plated; C 6ES7 292-1AG30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic; D 6ES7 822-0AA00-0YA7on DVD, 14-day trialB: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992SM 1221 digital input module■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4Siemens ST 70 N · 20104/43

SIMATIC S7-1200Digital modules© Siemens AG 2010SB 1221 digital input module■ Overview■ ApplicationThe SB 1221 Signal Board digital input modules enable connectionof the controller to digital process signals.4■ DesignThe Signal Boards are plugged straight into the holder on thefront of the S7-1200-CPU.• Mounting:Signal Boards are plugged direct into the SIMATIC S7-1200-CPU and linked electrically and mechanically with the CPU inthis way.• The installation dimensions of the CPU remain unchanged.• On all Signal Boards, replacement is facilitated by removableterminals ("permanent wiring").• Digital inputs as a supplement to the integral I/O of SIMATICS7-1200 CPUs• Can be plugged directly into the CPU■ Technical specifications6ES7 221-3AD30-0XB0Product type designation SB 12214xDI 5 V DC200 kHzSupply voltagesPower supply to the transmitters6ES7 221-3BD30-0XB0SB 12214xDI 24 V DC200 kHz• Supply current, max. 4 mA; per channel 4 mA; per channelCurrent consumptionfrom backplane bus 5 V DC, 50 mA 50 mAtyp.Power lossPower loss, typ. 1W 1WDigital inputsNumber of digital inputs 4 4• in groups of 1 1Number of simultaneouslycontrollable inputs• all mounting positions- Concurrently controllable 4 4inputs, up to 40 °CInput characteristic curve Yesacc. to IEC 1131, Type 1Input characteristic curveYesacc. to IEC 1131, Type 2Input voltage• Rated value, DC 5V 24 V• for signal "0" 0 to 1 V 0 to 5 V• for signal "1" 2 to 6 V 15 to 30 VInput current• for signal "0", max. 3mA2mA(permissible quiescentcurrent)• for signal "1", min. 6mA 5.8 mA• for signal "1", typ.14 mA■ FunctionThe SB 1221 Signal Board digital input/output modules convertthe level of the external digital signals from the process to theinternal signal level of the S7-1200.6ES7 221-3AD30-0XB0Product type designation SB 12214xDI 5 V DC200 kHzInput delay (for rated valueof input voltage)6ES7 221-3BD30-0XB0SB 12214xDI 24 V DC200 kHz• for standard inputs- parameterizable Yes; 0.2, 0.4, 0.8,1.6, 3.2, 6.4, and12.8 ms, selectablein groups of fourYes; 0.2, 0.4, 0.8,1.6, 3.2, 6.4, and12.8 ms, selectablein groups of four- at "0" to "1", max. 2µs 2.5 µs• for interrupt inputs- parameterizable Yes Yes• for counter/technologicalfunctions- parameterizable Yes YesCable length• Cable length, shielded,max.50 m 50 m; Standardinput: 500 m,high-speedcounters: 50 mNoShort-circuit protectionInterrupts/diagnostics/status informationAlarms•Alarms Yes YesDiagnoses• Diagnostic functions Yes YesInput delay (for rated valueof input voltage)Diagnostics indication LED• for status of inputs Yes Yes4/44 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSB 1221 digital input module■ Technical specifications (continued) ■ Ordering data Order No.6ES7 221-3AD30-0XB0Product type designation SB 12214xDI 5 V DC200 kHzClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall(in packaging)• Temperature- permissible temperaturerange• Air pressure acc. toIEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °CMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerange0.3 m; five times, inshipping package6ES7 221-3BD30-0XB0SB 12214xDI 24 V DC200 kHz0.3 m; five times, inshipping package-40 °C ... +70 °C1080 ... 660hPa 1080 ... 660hPa95% 95%0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mountedDegree of protectionIP20 Yes YesMechanicsType of housing (front)• Plastic Yes YesDimensions and weightDimensions•Width 38 mm 38 mm• Height 62 mm 62 mm•Depth 21 mm 21 mmWeight• Weight, approx. 40 g 40 g0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mountedSB 1221 Signal Boarddigital input modules4 inputs, 5 V DC, 200 kHz C 6ES7 221-3AD30-0XB04 inputs, 24 V DC, 200 kHz C 6ES7 221-3BD30-0XB0AccessoriesTerminal block (spare part)for Signal Boardwith 6 screws, gold-plated; C 6ES7 292-1BF30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8BH0English B 6ES7 298-8FA30-8AH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D9924Siemens ST 70 N · 20104/45

SIMATIC S7-1200Digital modules© Siemens AG 20104SM 1222 digital output module■ Overview• Digital outputs as supplement to the integral I/O of the CPUs• For flexible adaptation of the controller to the relevant task• For subsequent expansion of the system with additional outputs■ ApplicationDigital output modules permit the output of digital signals fromthe controller to the process.This provides users with the following advantages:• Optimum adaptation:With signal modules which can be mixed as desired, userscan adapt their controllers exactly to the relevant task. Thisavoids superfluous investments. Modules with 8, 16, and 32input/output channels are available.• Flexibility:If the task is expanded subsequently, the controller can be upgraded.Updating of the user program is extremely simple.■ FunctionThe SM 1222 digital output signal modules convert the internalsignal level of the SIMATIC S7-1200 into the external signal levelrequired by the process.■ Technical specificationsProduct type designation6ES7 222-1BF30-0XB0 6ES7 222-1BH30-0XB0 6ES7 222-1HF30-0XB0 6ES7 222-1HH30-0XB0SM1222DQ 8x24 V DCSM1222DQ 16x24 V DCSM 1222DQ 8xRelaySM1222DQ 16xRelaySupply voltagesRated value• permissible range, lower limit (DC) 20.4 V 20.4 V 5V 5V• permissible range, upper limit (DC) 28.8 V 28.8 V 30 V 30 VCurrent consumptionfrom backplane bus 5 V DC, max. 120 mA 140 mA 120 mA 135 mADigital inputs• from load voltage L+ (without load),11 mA / relay coil used 11 mA / relay coil usedmax.Power lossPower loss, typ. 1.5 W 2.5 W 4.5 W 8.5 WConnection methodrequired front connector Yes Yes Yes YesDigital inputsNumber of digital inputs 0 0 0 0Digital outputsNumber of digital outputs 8 16 8 16• in groups of 1 1 2 1Short-circuit protectionNo;to be provided externallyNo;to be provided externallyNo;to be provided externallyNo;to be provided externallyLimitation of inductive shutdown voltage typ. (L+) -48 Vtyp. (L+) -48 VtoSwitching capacity of the outputs• with resistive load, max. 0.5 A 0.5 A 2A 2A• on lamp load, max. 5W 5W 30 W DC; 200 W AC 30 W DC; 200 W AC4/46 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSM 1222 digital output module■ Technical specifications (continued)Product type designation6ES7 222-1BF30-0XB0 6ES7 222-1BH30-0XB0 6ES7 222-1HF30-0XB0 6ES7 222-1HH30-0XB0SM1222DQ 8x24 V DCSM1222DQ 16x24 V DCSM 1222DQ 8xRelaySM1222DQ 16xRelayOutput voltage• Rated value (AC) 5 to 250 V AC 5 to 250 V AC• Rated value (DC) 24 V 24 V 5 to 30 V DC 5 to 30 V DC• for signal "0" (DC), max.0.1 V; with 10 kohmsLoad0.1 V; with 10k ohmsLoad• for signal "1", min. 20 V DC 20 V DCOutput current• for signal "1" rated value 0.5 A 0.5 A• for signal "1" permissible range, max. 2A 2A• for signal "0" residual current, max. 10 µA 10 µAOutput delay with resistive load• 0 to "1", max. 50 µs 50 µs 10 ms 10 ms• 1 to "0", max. 200 µs 200 µs 10 ms 10 msAggregate current of outputs (per group)• horizontal installation- up to 50 °C, max. 4 A; Current per mass 8 A; Current per common 10 A;Current per commonCable length10 A;Current per common• Cable length, shielded, max. 500 m 500 m 500 m 500 m• Cable length unshielded, max. 150 m 150 m 150 m 150 mRelay outputsNumber of relay outputs 8 16Rated input voltage of relay L+ (DC) 24 V 24 VNumber of operating cyclesmechanically 10 million,at rated load voltage100,000mechanically 10 million,at rated load voltage100,000Switching capacity of contacts• with inductive load, max. 0.5 A 0.5 A 2A 2A• on lamp load, max. 5W 5W 30 W DC; 200 W AC 30 W DC; 200 W AC• with resistive load, max. 0.5 A 0.5 A 2A 2AInterrupts/diagnostics/status informationAlarms•Alarms Yes Yes Yes Yes• Diagnostic alarm Yes Yes Yes YesDiagnoses• Diagnostic functions Yes Yes Yes Yes• Monitoring the supply voltage to the Yes Yes Yes YeselectronicsDiagnostics indication LED• for status of outputs Yes Yes Yes Yes• for maintenance Yes Yes Yes Yes• Status indicator digital output (green) Yes Yes Yes YesGalvanic isolationGalvanic isolation digital outputs• between the channels Relay, dry contact Relay, dry contact• between the channels, in groups of 1 1 2 4• between the channels and the backplane500 V AC 500 V AC 1500 V AC for 1 minute 1500 V AC for 1 minutebusPermissible potential differencebetween different circuits 750 V AC for 1 minute 750 V AC for 1 minute4Siemens ST 70 N · 20104/47

SIMATIC S7-1200Digital modules© Siemens AG 2010SM 1222 digital output module4■ Technical specifications (continued)Product type designationSM1222DQ 8x24 V DCClimatic and mechanical conditions forstorage and transportClimatic conditions for storage andtransport• Free fall- Max. height of fall (in packaging) 0.3 m; five times,in shipping package6ES7 222-1BF30-0XB0 6ES7 222-1BH30-0XB0 6ES7 222-1HF30-0XB0 6ES7 222-1HH30-0XB0SM1222DQ 16x24 V DC0.3 m; five times,in shipping packageSM 1222DQ 8xRelay0.3 m; five times,in shipping packageSM1222DQ 16xRelay0.3 m; five times,in shipping package• Temperature- permissible temperature range -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C• Air pressure acc. toIEC 60068-2-13- permissible atmospheric pressure 1080 to 660hPa 1080 to 660hPa 1080 to 660hPa 1080 to 660hPa• Relative humidity- permissible range (without condensation)95% 95% 95% 95%at 25 °CMechanical and climatic conditionsduring operationClimatic conditions during operation• Temperature- permissible temperature range 0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C when verticallymounted0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C when verticallymounted- permissible temperature change 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/minDegree of protectionIP20 Yes Yes Yes YesStandards, approvals, certificatesCE mark Yes Yes Yes YesC-TICK Yes Yes Yes YesFM approval Yes Yes Yes YesMechanicsType of housing (front)• Plastic Yes Yes Yes YesDimensions and weightDimensions•Width 45 mm 45 mm 45 mm 45 mm• Height 100 mm 100 mm 100 mm 100 mm•Depth 75 mm 75 mm 75 mm 75 mmWeight• Weight, approx. 180 g 220 g 190 g 260 g4/48 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSM 1222 digital output module■ Ordering data Order No. Order No.SM 1222 digital output signalmodule8 outputs, 24 V DC; 0.5 A, C 6ES7 222-1BF30-0XB05 W, isolated16 outputs, 24 V DC; 0.5 A, C 6ES7 222-1BH30-0XB05 W, isolated8 relay outputs, 5 ... 30 V DC/ C 6ES7 222-1HF30-0XB05 ... 250 V AC, 2 A,30 W DC/200 W AC16 relay outputs, 5 ... 30 V DC/ C 6ES7 222-1HH30-0XB05 ... 250 V AC, 2 A,30 W DC/200 W ACAccessoriesExtension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules; length 2 mTerminal block (spare part)for 8/16-channel digital signalmoduleswith 7 screws, zinc-plated; C 6ES7 292-1AG30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8BH0English B 6ES7 298-8FA30-8AH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HS7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7D: Subject to export regulations: AL: N and ECCN: 5D9924■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 20104/49

SIMATIC S7-1200Digital modules© Siemens AG 2010SB 1222 digital output module■ Overview■ ApplicationThe SB 1222 Signal Board digital output modules enable thedigital signals of the controller to be output to the process.4■ DesignThe Signal Boards are plugged straight into the holder on thefront of the S7-1200-CPU.• Mounting:Signal Boards are plugged direct into the SIMATIC S7-1200-CPU and linked electrically and mechanically with the CPU inthis way.• The installation dimensions of the CPU remain unchanged.• On all Signal Boards, replacement is facilitated by removableterminals ("permanent wiring").• Digital outputs as a supplement to the integral I/O of SIMATICS7-1200 CPUs• Can be plugged directly into the CPU■ Technical specifications6ES7 222-1AD30-0XB06ES7 222-1BD30-0XB0Product type designation SB 12224xDQ 5 VDC 200 kHzSB 12224xDQ 24 V DC200 kHzSupply voltagesPower supply to the transmitters• Supply current, max. 4 mA; per channel 4 mA; per channelCurrent consumptionfrom backplane bus 5 V DC, 50 mA 50 mAtyp.Power lossPower loss, typ. 1W 1WDigital outputsNumber of digital outputs 4 4• in groups of 1 1Short-circuit protection No NoSwitching capacity of theoutputs• with resistive load, max. 0.1 A 0.1 AOutput voltage• Rated value (DC) 5V 24 V• for signal "0" (DC), max. 0.4 V 0.1 V; with 10kohms load• for signal "1", min. L+ (-0.5 V) 20 V• for signal "1" (DC), max. 6VOutput current• for signal "1" rated value 0.1 A 0.1 A• for signal "1" permissible 0.11 Arange, max.• for signal "0" residualcurrent, max.10 µA■ FunctionThe SB 1222 Signal Board digital input/output modules convertthe internal signal level of the S7-1200 to the external signal levelrequired for the process.6ES7 222-1AD30-0XB0Product type designation SB 12224xDQ 5 VDC 200 kHzLoad resistance range• upper limit 5 Ω 10 ΩCable length• Cable length, shielded, 50 m 50 mmax.Interrupts/diagnostics/status informationAlarms•Alarms Yes YesDiagnoses• Diagnostic functions Yes YesDiagnostics indication LED• for status of outputs Yes YesClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall(in packaging)• Atmospheric pressure acc.to IEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °C0.3 m; five times, inshipping package6ES7 222-1BD30-0XB0SB 12224xDQ 24 V DC200 kHz0.3 m; five times, inshipping package1080 bis 660hPa 1080 bis 660hPa95% 95%4/50 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modules■ Technical specifications (continued)6ES7 222-1AD30-0XB0Product type designation SB 12224xDQ 5 VDC 200 kHzMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerange0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mountedDegree of protectionIP20 Yes Yes6ES7 222-1BD30-0XB0SB 12224xDQ 24 V DC200 kHz0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted6ES7 222-1AD30-0XB0Product type designation SB 12224xDQ 5 VDC 200 kHzMechanicsType of housing (front)SB 1222 digital output module•Plastic Yes YesDimensions and weightDimensions• Width 38 mm 38 mm• Height 62 mm 62 mm•Depth 21 mm 21 mmWeight• Weight, approx. 40 g 40 g6ES7 222-1BD30-0XB0SB 12224xDQ 24 V DC200 kHz4■ Ordering data Order No. Order No.SB 1222 Signal Boarddigital output modules4 outputs, 5 V DC, 0.1 A, C 6ES7 222-1AD30-0XB0200 kHz4 outputs, 24 V DC, 0.1 A, C 6ES7 222-1BD30-0XB0200 kHzAccessoriesTerminal block (spare part)for Signal Boardwith 6 screws, gold-plated; C 6ES7 292-1BF30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8BH0English B 6ES7 298-8FA30-8AH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HS7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7D: Subject to export regulations: AL: N and ECCN: 5D992Siemens ST 70 N · 20104/51

SIMATIC S7-1200Digital modules© Siemens AG 20104SM 1223 digital input/output module■ Overview■ ApplicationDigital input/output modules permit:• Connection of the controller to digital signals of the process• Output of digital signals from the controller to the processThis provides users with the following advantages:• Optimum adaptation:With signal modules which can be mixed as desired, userscan adapt their controllers exactly to the relevant task. Thisavoids superfluous investments. Modules with 8, 16, and 32input/output channels are available.• Flexibility:If the task is expanded subsequently, the controller can be upgraded.Updating of the user program is extremely simple• Digital inputs and outputs as supplement to the integral I/O ofthe CPUs• For flexible adaptation of the controller to the relevant task• For subsequent expansion of the system with additional inputsand outputs■ FunctionThe SM 1223 digital input/output signal modules convert• the level of the external digital signals from the process intothe internal signal level of the S7-1200 and• the internal signal level of the S7-1200 into the external signallevel required by the process.■ Technical specificationsProduct type designation SM 1223DI 8x24 V DC,DQ 8x24 V DCSupply voltagesRated value6ES7 223-1BH30-0XB0 6ES7 223-1BL30-0XB0 6ES7 223-1PH30-0XB0 6ES7 223-1PL30-0XB0SM 1223DI 16x24 V DC,DQ 16x24 V DCSM 1223DI 8x24 V DC,DQ 8xRelaySM 1223DI 16x24 V DC,DQ 16xRelay• 24 V DC Yes Yes Yes Yes• permissible range, lower limit (DC) 20.4 V 20.4 V 20.4 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 V 28.8 V 28.8 VPower supply to the transmitters• present Yes Yes Yes YesCurrent consumptionfrom backplane bus 5 V DC, max. 145 mA 185 mA 145 mA 180 mADigital inputs• from load voltage L+ (without load),max.Power loss4 mA; per channel 4 mA; per channel 4 mA / input 11 mA /relayPower loss, typ. 2.5 W 4.5 W 5.5 W 10 WConnection methodrequired front connector Yes Yes Yes YesDigital inputsNumber of digital inputs 8 16 8 16• in groups of 2 2 2 2Number of simultaneously controllableinputs• all mounting positions- Concurrently controllable inputs,up to 40 °C8 16 8 164 mA / input 11 mA /relay4/52 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSM 1223 digital input/output module■ Technical specifications (continued)Product type designation SM 1223DI 8x24 V DC,DQ 8x24 V DCNumber of simultaneously controllableinputs6ES7 223-1BH30-0XB0 6ES7 223-1BL30-0XB0 6ES7 223-1PH30-0XB0 6ES7 223-1PL30-0XB0SM 1223DI 16x24 V DC,DQ 16x24 V DCSM 1223DI 8x24 V DC,DQ 8xRelaySM 1223DI 16x24 V DC,DQ 16xRelay• horizontal installation- up to 40 °C, max. 8 16 8 16- up to 50 °C, max. 8 16 8 16• vertical installation- up to 40 °C, max. 8 16 8 16Input characteristic curve acc. to Yes Yes Yes YesIEC 1131, Type 1Input voltage• Rated value, DC 24 V 24 V 24 V 24 V• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA• for signal "1" 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mAInput current• for signal "0", max.1mA 1mA 1mA 1mA(permissible quiescent current)• for signal "1", min. 2.5 mA 2.5 mA 2.5 mA 2.5 mA• for signal "1", typ. 4 mA; Typical 4 mA; Typical 4 mA; Typical 4 mA; TypicalInput delay (for rated value of inputvoltage)• for standard inputs- parameterizable Yes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offourYes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offourYes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offour• for interrupt inputs- parameterizable Yes Yes Yes YesCable length• Cable length, shielded, max. 500 m 500 m 500 m 500 m• Cable length unshielded, max. 300 m 300 m 300 m 300 mDigital outputsNumber of digital outputs 8 16 8 16• in groups of 1 1 2 4Short-circuit protectionNo;to be provided externallyNo;to be provided externallyNo;to be provided externallyYes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offourNo;to be provided externallyLimitation of inductive shutdown voltage L+ (-48 V) L+ (-48 V)toSwitching capacity of the outputs• with resistive load, max. 0.5 A 0.5 A 2A 2A• on lamp load, max. 5W 5W 30 W DC; 200 W AC 30 W DC; 200 W ACOutput voltage• Rated value (AC) 5 to 250 V AC 5 to 250 V AC• Rated value (DC) 24 V 24 V 5 to 30 V DC 5 to 30 V DC• for signal "0" (DC), max. 0.1 V;with 10 kohms Load0.1 V;with 10 kohms Load• for signal "1", min. 20 V DC 20 V DCOutput current• for signal "1" permissible range, max. 0.5 A 0.5 A 2A 2A• for signal "0" residual current, max. 10 µA 10 µAOutput delay with resistive load• 0 to "1", max. 50 µs 50 µs 10 ms 10 ms• 1 to "0", max. 200 µs 200 µs 10 ms 10 ms4Siemens ST 70 N · 20104/53

SIMATIC S7-1200Digital modules© Siemens AG 2010SM 1223 digital input/output module■ Technical specifications (continued)Product type designation SM 1223DI 8x24 V DC,DQ 8x24 V DCAggregate current of outputs (per group)6ES7 223-1BH30-0XB0 6ES7 223-1BL30-0XB0 6ES7 223-1PH30-0XB0 6ES7 223-1PL30-0XB0SM 1223DI 16x24 V DC,DQ 16x24 V DCSM 1223DI 8x24 V DC,DQ 8xRelaySM 1223DI 16x24 V DC,DQ 16xRelay• horizontal installation- up to 50 °C, max. 4 A; Current per mass 8 A; Current per mass 10 A; Current per mass 8 A; Current per mass4Cable length• Cable length, shielded, max. 500 m 500 m 500 m 500 m• Cable length unshielded, max. 150 m 150 m 150 m 150 mRelay outputsNumber of relay outputs 8 16Rated input voltage of relay L+ (DC) 24 V 24 VNumber of operating cyclesmechanically 10 million,at rated load voltage100 000mechanically 10 million,at rated load voltage100 000Switching capacity of contacts• with inductive load, max. 0.5 A 0.5 A 2A 2A• on lamp load, max. 5W 5W 30 W DC; 200 W AC 30 W DC; 200 W AC• with resistive load, max. 0.5 A 0.5 A 2A 2AInterrupts/diagnostics/status informationAlarms•Alarms Yes Yes Yes Yes• Diagnostic alarm Yes Yes Yes YesDiagnoses• Diagnostic functions Yes Yes Yes Yes• Monitoring the supply voltage to the Yes Yes Yes YeselectronicsDiagnostics indication LED• for status of inputs Yes Yes Yes Yes• for status of outputs Yes Yes Yes Yes• for maintenance Yes Yes Yes Yes• Status indicator digital output (green) Yes Yes Yes Yes• Status indicator digital input (green) Yes Yes Yes YesGalvanic isolationGalvanic isolation digital inputs• between the channels, in groups of 2 2 2 2Galvanic isolation digital outputs• between the channels Relays Relays• between the channels, in groups of 1 1 2 4• between the channels and the backplane500 V AC 500 V AC 1500 V AC for 1 minute 1500 V AC for 1 minutebusPermissible potential differencebetween different circuits 750 V AC for 1 minute 750 V AC for 1 minuteClimatic and mechanical conditions forstorage and transportClimatic conditions for storage andtransport• Free fall- Max. height of fall (in packaging) 0.3 m; five times, inshipping package0.3 m; five times, inshipping package0.3 m; five times, inshipping package0.3 m; five times, inshipping package4/54 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSM 1223 digital input/output module■ Technical specifications (continued)Product type designation SM 1223DI 8x24 V DC,DQ 8x24 V DCClimatic conditions for storage andtransport6ES7 223-1BH30-0XB0 6ES7 223-1BL30-0XB0 6ES7 223-1PH30-0XB0 6ES7 223-1PL30-0XB0SM 1223DI 16x24 V DC,DQ 16x24 V DCSM 1223DI 8x24 V DC,DQ 8xRelaySM 1223DI 16x24 V DC,DQ 16xRelay• Temperature- permissible temperature range -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C -40 °C ... +70 °C• Atmospheric pressure acc. toIEC 60068-2-13- permissible atmospheric pressure 1080 to 660hPa 1080 to 660hPa 1080 to 660hPa 1080 to 660hPa• Relative humidity- permissible range95% 95% 95% 95%(without condensation) at 25 °CMechanical and climatic conditionsduring operationClimatic conditions during operation• Temperature- permissible temperature range 0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C whenvertically mounted0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C whenvertically mounted0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C whenvertically mounted0 °C ... 55 °C whenhorizontally mounted0 °C ... 45 °C whenvertically mounted- permissible temperature change 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/min 5 °C ... 55 °C, 3 °C/minDegree of protectionIP20 Yes Yes Yes YesStandards, approvals, certificatesCE mark Yes Yes Yes YesC-TICK Yes Yes Yes YesFM approval Yes Yes Yes YesMechanicsType of housing (front)• Plastic Yes Yes Yes YesDimensions and weightDimensions• Width 45 mm 70 mm 45 mm 70 mm• Height 100 mm 100 mm 100 mm 100 mm•Depth 75 mm 75 mm 75 mm 75 mmWeight• Weight, approx. 210 g 310 g 230 g 350 g4Siemens ST 70 N · 20104/55

SIMATIC S7-1200Digital modules© Siemens AG 2010SM 1223 digital input/output module4■ Ordering data Order No. Order No.SM 1223 digital input/outputsignal module8 inputs, 24 V DC, IEC type 1current sinking;8 24 V DC transistor outputs,0.5 A, 5 W16 inputs, 24 V DC, IEC type 1current sinking;16 24 V DC transistor outputs,0.5 A, 5 W8 inputs, 24 V DC, IEC type 1current sinking;8 relay outputs, 5 ... 30 V DC/5 ... 250 V AC, 2 A,30 W DC/200 W AC16 inputs, 24 V DC, IEC type 1current sinking;16 relay outputs, 5 ... 30 V DC/5 ... 250 V AC, 2 A,30 W DC/200 W ACAccessoriesExtension cable for two-tierconfigurationfor connecting digital/analogsignal modules;length 2 mTerminal block (spare part)for 8/16-channel digital signalmoduleswith 7 screws, zinc-plated;4 pcs.B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HCCCCCC6ES7 223-1BH30-0XB06ES7 223-1BL30-0XB06ES7 223-1PH30-0XB06ES7 223-1PL30-0XB06ES7 290-6AA30-0XA06ES7 292-1AG30-0XA0S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7D: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/56 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSB 1223 digital input/output module■ Overview■ ApplicationThe SB 1223 digital input/output signal module permits:• Connection of the controller to digital signals of the process• Output of digital signals from the controller to the process.■ DesignThe signal boards are plugged directly into the receptacle on thefront of each S7-1200 CPU.• Mounting:Signal boards are plugged directly into the SIMATIC S7-1200CPU and are thus electrically and mechanically connected tothe CPU• The CPU mounting dimensions remain unchanged• All signal boards are easy to replace thanks to removable connectingterminals ("independent wiring")4• Digital inputs and outputs as supplement to the integral I/O ofthe SIMATIC S7-1200 CPUs• Can be plugged direct into the CPU■ FunctionThe SB 1223 digital input/output signal board converts• the level of the external digital signals from the process intothe internal signal level of the S7-1200 and• the internal signal level of the S7-1200 into the external signallevel required by the process■ Technical specificationsProduct type designation SB 1223DI 2x24 V DC, DQ 2x24 V DCSupply voltagesRated value• permissible range, lower limit (DC) 20.4 V• permissible range, upper limit (DC) 30 VPower supply to the transmitters6ES7 223-0BD30-0XB0 6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0SB 12232xDI / 2xDQ 5 V DC 200kHzSB 12232xDI / 2xDQ 24 V DC 200kHz• Supply current, max. 4 mA; per channel 4 mA; per channel 4 mA; per channelCurrent consumptionfrom backplane bus 5 V DC, typ. 50 mA 50 mA 50 mAPower lossPower loss, typ. 1W 1W 1WDigital inputsNumber of digital inputs 2 2 2• in groups of 1 1 1Number of simultaneously controllableinputs• all mounting positions- Concurrently controllable inputs, 2 2 2up to 40 °CInput characteristic curve acc. to Yes Yes YesIEC 1131, Type 1Input voltage• Rated value, DC 24 V 5V 24 V• for signal "0" 0 to 5 V 0 to 1 V 0 to 5 V• for signal "1" 15 to 30 V 2 to 6 V 15 to 30 VInput current• for signal "0", max.1mA 3mA 2mA(permissible quiescent current)• for signal "1", min. 6mA 5.8 mA• for signal "1", typ. 0.5 A 14 mASiemens ST 70 N · 20104/57

SIMATIC S7-1200Digital modules© Siemens AG 2010SB 1223 digital input/output module4■ Technical specifications (continued)Product type designation SB 1223DI 2x24 V DC, DQ 2x24 V DCInput delay (for rated value of input voltage)• for standard inputs- parameterizable Yes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4,and 12.8 ms, selectable in groupsof four6ES7 223-0BD30-0XB0 6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0SB 12232xDI / 2xDQ 5 V DC 200kHzYes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4,and 12.8 ms, selectable in groupsof fourSB 12232xDI / 2xDQ 24 V DC 200kHzYes; 0.2, 0.4, 0.8, 1.6, 3.2, 6.4,and 12.8 ms, selectable in groupsof four- at "0" to "1", max. 2µs 2µs 2.5 µs- at "1" to "0", max. 10 µs• for interrupt inputs- parameterizable Yes Yes Yes• for counter/technological functions- parameterizable Yes Yes YesCable length• Cable length, shielded, max. 500 m 50 m 50 m for technological functions• Cable length unshielded, max. 300 mDigital outputsNumber of digital outputs 2 2 2• in groups of 1 1 1Short-circuit protection No No NoSwitching capacity of the outputs• with resistive load, max. 0.5 A 0.1 A 0.1 A• on lamp load, max.5WOutput voltage• Rated value (DC) 24 V 5V 24 V• for signal "0" (DC), max. 0.1 V; with 10k ohms load 0.4 V 0.1 V; with 10 kohms load• for signal "1", min. 20 V L+ (-0.5 V) 20 V• for signal "1" (DC), max.6VOutput current• for signal "1" rated value 0.5 A 0.1 A 0.1 A• for signal "1" permissible range, max.0.11 A• for signal "0" residual current, max. 10 µA 10 µALoad resistance range• upper limit 0.6 Ω 5 Ω 10 ΩCable length• Cable length, shielded, max. 500 m 50 m 50 m• Cable length unshielded, max. 150 mInterrupts/diagnostics/status informationAlarms•Alarms Yes Yes YesDiagnoses• Diagnostic functions Yes Yes YesDiagnostics indication LED• for status of inputs Yes Yes Yes• for status of outputs Yes Yes Yes4/58 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Digital modulesSB 1223 digital input/output module■ Technical specifications (continued)Product type designation SB 1223DI 2x24 V DC, DQ 2x24 V DCClimatic and mechanical conditions forstorage and transportClimatic conditions for storage andtransport• Free fall- Max. height of fall (in packaging) 0.3 m; five times, in shippingpackage6ES7 223-0BD30-0XB0 6ES7 223-3AD30-0XB0 6ES7 223-3BD30-0XB0SB 12232xDI / 2xDQ 5 V DC 200kHz0.3 m; five times, in shippingpackageSB 12232xDI / 2xDQ 24 V DC 200kHz0.3 m; five times, in shippingpackage• Air pressure acc. to IEC 60068-2-13- permissible atmospheric pressure 1080 to 660 hPa 1080 to 660 hPa 1080 to 660 hPa• Relative humidity- permissible range (without condensation)95% 95% 95%at 25 °CMechanical and climatic conditionsduring operationClimatic conditions during operation• Temperature- permissible temperature range 0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymountedDegree of protection0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymountedIP20 Yes Yes YesMechanicsType of housing (front)• Plastic Yes Yes YesDimensions and weightDimensions• Width 38 mm 38 mm 38 mm• Height 62 mm 62 mm 62 mm•Depth 21 mm 21 mm 21 mmWeight• Weight, approx. 40 g 40 g 40 g0 °C ... 55 °C when horizontallymounted0 °C ... 45 °C when verticallymounted4Siemens ST 70 N · 20104/59

SIMATIC S7-1200Digital modules© Siemens AG 2010SB 1223 digital input/output module4■ Ordering data Order No. Order No.SB 1223 digital input/outputsignal board2 inputs, 24 V DC, IEC type 1 C 6ES7 223-0BD30-0XB0current sinking;2 24 V DC transistor outputs,0.5 A, 5 W;can be used as HSC at up to30 kHz2 inputs, 5 V DC, 200 kHz C 6ES7 223-3AD30-0XB02 outputs 5 V DC, 0.1 A,200 kHz2 inputs, 24 V DC, 200 kHz C 6ES7 223-3BD30-0XB02 outputs 24 V DC, 0.1 A,200 kHzAccessoriesTerminal block (spare part)for signal boardwith 6 screws, gold-plated; C 6ES7 292-1BF30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HS7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7D: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/60 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200SIPLUS digital modulesSIPLUS digital modulesSM 1221, SM 1222, SM 1223■ Overview SIPLUS SM 1221 digital input modules• Digital inputs as supplement to the integral I/O of the CPUs• For flexible adaptation of the controller to the relevant task• For subsequent expansion of the system with additional inputsFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku4SIPLUS SM 1221Order No. 6AG1 221-1BF30-2XB0 6AG1 221-1BH30-2XB0Order No. based on 6ES7 221-1BF30-0XB0 6ES7 221-1BH30-0XB0Ambient temperature rangeAmbient conditionsTechnical data-25 ... +70 °C; condensation permissibleResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2)active substances and compliant with ISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/4) or go towww.siemens.com/siplus-extremeThe technical data of the standard product apply with the exception of the environmental conditions.1) ISA -S71.04 severity level GX from October 2010■ Overview SIPLUS SM 1222 digital output modules• Digital outputs as supplement to the integral I/O of the CPUs• For flexible adaptation of the controller to the relevant task• For subsequent expansion of the system with additional outputsFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuSIPLUS SM 1222Order No. 6AG1 222-1BF30-2XB0 6AG1 222-1BH30-2XB0 6AG1 222-1HF30-2XB0 6AG1 222-1HH30-2XB0Order No. based on 6ES7 222-1BF30-0XB0 6ES7 222-1BH30-0XB0 6ES7 222-1HF30-0XB0 6ES7 222-1HH30-0XB0Ambient temperature rangeAmbient conditionsTechnical data-25 ... +70 °C; condensation permissibleResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2)active substances and compliant with ISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/4) or go towww.siemens.com/siplus-extremeThe technical data of the standard product apply with the exception of the environmental conditions.1) ISA -S71.04 severity level GX from October 2010Siemens ST 70 N · 20104/61

SIMATIC S7-1200SIPLUS digital modulesSIPLUS digital modulesSM 1221, SM 1222, SM 1223© Siemens AG 2010■ Overview SIPLUS SM 1223 digital input/output module• Digital inputs and outputs as supplement to the integral I/O ofthe CPUs• For flexible adaptation of the controller to the relevant task• For subsequent expansion of the system with additional inputsand outputsFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku4SIPLUS SM 1223Order No. 6AG1 223-1BH30-2XB0 6AG1 223-1PH30-2XB0 6AG1 223-1PL30-2XB0 6AG1 223-1BL30-2XB0Order No. based on 6ES7 223-1BH30-0XB0 6ES7 223-1PH30-0XB0 6ES7 223-1PL30-0XB0 6ES7 223-1BL30-0XB0Ambient temperature range -25 ... +70 °C; condensation permissibleAmbient conditionsResistant in accordance with EN60721 to chemically (-3C4), mechanically (-3S4) and biologically (-3B2)active substances and compliant with ISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmental conditions of SIPLUS extreme (on pg. 4/4) or go towww.siemens.com/siplus-extremeTechnical dataThe technical data of the standard product apply with the exception of the environmental conditions.1) ISA -S71.04 severity level GX from October 2010■ Ordering data Order No. Order No.SIPLUS SM 1221Digital input module(extended temperature range andmedial exposure)8 inputs, 24 V DC, isolated, Ccurrent sourcing/sinking;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%16 inputs, 24 V DC, isolated, Ccurrent sourcing/sinking;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%SIPLUS SM 1222Digital output module(extended temperature range andmedial exposure)8 outputs, 24 V DC; 0.5 A, 5 W, Cisolated16 outputs, 24 V DC; 0.5 A, 5 W, Cisolated8 relay outputs,C5 ... 30 V DC/5 ... 250 V AC, 2 A,30 W DC/200 W AC;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%16 relay outputs,C5 ... 30 V DC/5 ... 250 V AC, 2 A,30 W DC/200 W AC;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%C: Subject to export regulations: AL: N and ECCN: EAR99H4/62 Siemens ST 70 N · 20106AG1 221-1BF30-2XB06AG1 221-1BH30-2XB06AG1 222-1BF30-2XB06AG1 222-1BH30-2XB06AG1 222-1HF30-2XB06AG1 222-1HH30-2XB0SIPLUS SM 1223Digital input/output module(extended temperature range andmedial exposure)8 inputs, 24 V DC, IEC type 1 Ccurrent sinking;8 24 V DC transistor outputs,0.5 A, 5 Wfrom +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%16 inputs, 24 V DC, IEC type 1 Ccurrent sinking;16 24 V DC transistor outputs,0.5 A, 5 W8 inputs, 24 V DC, IEC type 1 Ccurrent sinking;8 relay outputs,5 ... 30 V DC/5 ... 250 V AC, 2 A,30 W DC/200 W AC;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%16 inputs, 24 V DC, IEC type 1 Ccurrent sinking;16 relay outputs,5 ... 30 V DC/5 ... 250 V AC, 2 A,30 W DC/200 W AC;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%Accessories6AG1 223-1BH30-2XB06AG1 223-1BL30-2XB06AG1 223-1PH30-2XB06AG1 223-1PL30-2XB0see S7-1200 digital modules,pages 4/45, 4/49, 4/56

© Siemens AG 2010SIMATIC S7-1200SIPLUS digital modules■ Overview■ Ordering dataSIPLUS SB 1223 digital input/output moduleDigital input/output moduleSignal Board SIPLUS SB 1223(extended temperature range andmedial exposure)2 inputs, 24 V DC, IEC type 1 Ccurrent sinking;two 24 V DC transistor outputs,0.5 A, 5 W;can be used as HSC at up to30 kHzAccessoriesOrder No.6AG1 223-0BD30-5XB0see S7-1200 digital modules,page 4/60C: Subject to export regulations: AL: N and ECCN: EAR99H4• Digital inputs and outputs as supplement to the integral I/O ofthe SIMATIC S7-1200 CPUs• Can be plugged direct into the CPUFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data1) ISA -S71.04 severity level GX from October 2010SIPLUS SB 12236AG1 223-0BD30-5XB06ES7 223-0BD30-0XB0-25 ... +55 °C;condensation permissibleResistant in accordance withEN60721 to chemically (-3C4),mechanically (-3S4) and biologically(-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer toEnvironmental conditions ofSIPLUS extreme (on pg. 4/4) orgo towww.siemens.com/siplusextremeThe technical data of the standardproduct apply with theexception of the environmentalconditions.Siemens ST 70 N · 20104/63

SIMATIC S7-1200Analog modules© Siemens AG 2010SM 1231 analog input module4■ Overview• Analog inputs for SIMATIC S7-1200• With extremely short conversion times• For connecting analog sensors without additional amplifiers• For solving even more complex automation tasks■ ApplicationThe SM 1231 analog input signal modules allow the connectionof the controller to analog signals of the process.This provides users with the following advantages:• Optimal adaptation:With analog signal modules, users can optimally adapt theircontrollers even to more complex tasks.• Direct connection of sensors:Up to 14 bit resolution and different input ranges permit theconnection of sensors without additional amplifier.• Flexibility:If the task is expanded subsequently, the controller can beupgraded. Updating of the user program is extremely simple.■ DesignThe signal modules have the same design features as the basicdevices.• Installation on DIN rails:The modules are snapped onto the rail next to the CPU on theright and are electrically and mechanically connected to eachother and to the CPU by the integral slide mechanism.• Direct installation:Horizontal or vertical mounting on DIN rail or direct mountingin the cabinet using integral lugs.■ FunctionThe SM 1231 analog input signal modules convert analog signalsfrom the process into digital signals for internal processingby the SIMATIC S7-1200.■ Technical specifications6ES7 231-4HD30-0XB0Product type designation SM 1231AI 4 x13 bitSupply voltagesRated value•24 V DC Yes YesCurrent consumptionCurrent consumption, typ. 45 mA 45 mAfrom backplane bus 5 V DC, 80 mA 90 mAtyp.Power lossPower loss, typ. 1.5 W 1.5 WConnection methodrequired front connector Yes YesAnalog inputsNumber of analog inputs 4;Current or voltagedifferential inputspermissible input frequencyfor current input (destructionlimit), max.permissible input current forvoltage input (destructionlimit), max.Cycle time (all channels)max.Technical unit for temperaturemeasurement adjustable•VoltageYes;±10 V, ±5 V, ±2.5 V± 35 V ± 35 V40 mA 40 mA625 µs 625 µs6ES7 231-4HF30-0XB0SM 1231AI 8 x 13 bit8;Current or voltagedifferential inputsYes;±10 V, ±5 V, ±2.5 V• Current Yes; 0 to 20 mA Yes; 0 to 20 mA• Thermocouple No No• Resistance thermometer No No• Resistance No NoInput ranges (rated values),voltages• -10 V to +10 V Yes Yes• Input resistance≥9 Mohms ≥9 Mohms(-10 V to +10 V)• -2.5 V to +2.5 V Yes Yes• Input resistance≥9 Mohms ≥9 Mohms(-2.5 V to +2.5 V)• -5 V to +5 V Yes Yes• Input resistance≥9 Mohms ≥9 Mohms(-5 V to +5 V)Input ranges (rated values),currents• 0 to 20 mA Yes Yes• Input resistance≥ 250 ohms ≥ 250 ohms(0 to 20 mA)Voltage input• permissible input voltagefor voltage input (destructionlimit), max.35 V 35 V4/64 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modules■ Technical specifications (continued)6ES7 231-4HD30-0XB0Product type designation SM 1231AI 4 x13 bitCurrent input• permissible input currentfor current input (destructionlimit), max.Temperature compensation• Temperature compensation NoparameterizableAnalog outputs40 mA 40 mA6ES7 231-4HF30-0XB0SM 1231AI 8 x 13 bitNumber of analog outputs 0 0Analog value creationIntegrations and conversiontime/ resolution per channel• Resolution with overrange 12 bit; + sign 12 bit; + sign(bit including sign), max.• Integration time, parameterizableYesYes• Interference voltage suppressionfor interferencefrequency f1 in HzSmoothing of measuredvalues40 dB, DC to 60 Vfor interference frequency50 / 60 HzNo• parameterizable Yes Yes• Step: None Yes Yes• Step: Low Yes Yes•Step: Medium Yes Yes• Step: High Yes YesErrors/accuraciesTemperature error (relative toinput area)25°C ±0.1% to55°C ±0.2%total measurementrange40 dB, DC to 60 Vfor interference frequency50 / 60 Hz25°C ±0.1% to55°C ±0.2%total measurementrangeBasic error limit (operationallimit at 25 °C)• Voltage, relative to input +/- 0,1 % +/- 0,1 %area• Current, relative to input +/- 0,1 % +/- 0,1 %areaInterference voltagesuppression forf = n x (fl +/- 1%),fl = interference frequency• common mode voltage, 12 V 12 Vmax.Interrupts/diagnostics/status informationAlarms•Alarms Yes Yes• Diagnostic alarm Yes YesDiagnoses• Diagnostic functions Yes Yes• Monitoring the supply YesYesvoltage to the electronics• Wire break No No6ES7 231-4HD30-0XB0Product type designation SM 1231AI 4 x13 bitDiagnostics indication LEDSM 1231 analog input module• for status of inputs Yes Yes• for maintenance Yes YesGalvanic isolationGalvanic isolation analogoutputs• between the channels and NoNothe power supply of theelectronicsClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall(in packaging)•Temperature- permissible temperaturerange• Atmospheric pressure acc.to IEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °CMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerange0.3 m; five times, inshipping package6ES7 231-4HF30-0XB0SM 1231AI 8 x 13 bit0.3 m; five times, inshipping package-40 °C ... +70 °C -40 °C ... +70 °C1080 to 660 hPa 1080 to 660 hPa95% 95%0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted• Air pressure acc. toIEC 60068-2-13- permissible atmospheric 1080 ... 795 hPa 1080 ... 795 hPapressure• Concentration of pollutants- SO2 at RH < 60% < 0.5 ppm < 0.5 ppmwithout condensation- H2S at RH < 60% < 0.1 ppm < 0.1 ppmwithout condensationDegree of protectionIP20 Yes YesStandards, approvals,certificatesCE mark Yes YesC-TICK Yes YesFM approval Yes Yes4Siemens ST 70 N · 20104/65

SIMATIC S7-1200Analog modules© Siemens AG 20104SM 1231 analog input module■ Technical specifications (continued)6ES7 231-4HD30-0XB0Product type designation SM 1231AI 4 x13 bitMechanicsType of housing (front)• Plastic Yes YesDimensions and weightDimensions•Width 45 mm 45 mm• Height 100 mm 100 mm•Depth 75 mm 75 mmWeight• Weight, approx. 180 g 180 g6ES7 231-4HF30-0XB0SM 1231AI 8 x 13 bit■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial■ Ordering dataOrder No.SM 1231 analog input signalmodule4 analog inputsC 6ES7 231-4HD30-0XB0±10 V, ±5 V, ±2.5 V, or0 ... 20 mA; 12 bits + sign8 analog inputsC 6ES7 231-4HF30-0XB0±10 V, ±5 V, ±2.5 V, or0 to 20 mA; 12 bits + signAccessoriesExtension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules;length 2 mTerminal block (spare part)for 8/16-channel analog signalmoduleswith 7 screws, gold-plated; C 6ES7 292-1BG30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D9924/66 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modules■ OverviewSM 1232 analog output module■ ApplicationSM 1232 analog output signal modules permit the use of analogoutputs.This provides users with the following advantages:• Optimal adaptation:With analog signal modules, users can optimally adapt theircontrollers even to more complex tasks• Direct connection of actuators:Up to 14 bit resolution permit the connection of actuators withoutan additional amplifier• Flexibility:If the task is expanded subsequently, the controller can be upgraded.Updating of the user program is extremely simple4• Analog outputs for SIMATIC S7-1200• With extremely short conversion times• For connecting analog actuators without additional amplifiers• For solving even more complex automation tasks■ Technical specifications■ DesignThe signal modules have the same design features as the basicdevices.• Installation on DIN rails:The modules are snapped onto the rail next to the CPU on theright and are electrically and mechanically connected to eachother and to the CPU by the integral slide mechanism.• Direct installation:Horizontal or vertical mounting on DIN rail or direct mountingin the cabinet using integral lugs.■ FunctionSM 1232 analog output signal modules convert digital signals ofthe SIMATIC S7-1200 into signals for controlling the respectiveprocess.6ES7 232-4HB30-0XB0Product type designation SM 1232AQ 2x14 bitSupply voltagesRated value• 24 V DC Yes YesCurrent consumptionCurrent consumption, typ. 45 mA 45 mAfrom backplane bus 5 V DC, 80 mA 80 mAtyp.Power lossPower loss, typ. 1.5 W 1.5 WConnection methodrequired front connector Yes YesAnalog inputsNumber of analog inputs 0Analog outputsNumber of analog outputs 2;Current or voltageOutput ranges, voltage• -10 to +10 V Yes Yes6ES7 232-4HD30-0XB0SM 1232AQ 4 x 14bit4;Current or voltage6ES7 232-4HB30-0XB0Product type designation SM 1232AQ 2x14 bitOutput ranges, current6ES7 232-4HD30-0XB0SM 1232AQ 4 x 14bit• 0 to 20 mA Yes YesLoad impedance (in ratedrange of output)• with voltage outputs, min. 1 000 Ω 1 000 Ω• with current outputs, max. 600 Ω 600 ΩAnalog value creationMeasurement principle Differential DifferentialIntegrations and conversiontime/ resolution per channel• Resolution(incl. overrange)• Integration time,parameterizable• Interference voltagesuppression for interferencefrequency f1 in HzVoltage: 14 bits;Current : 13 bitsYes40 dB, DC to 60 Vfor interference frequency50 / 60 HzVoltage: 14 bits;Current : 13 bitsYes40 dB, DC to 60 Vfor interference frequency50 / 60 HzSiemens ST 70 N · 20104/67

SIMATIC S7-1200Analog modules© Siemens AG 2010SM 1232 analog output module4■ Technical specifications (continued)6ES7 232-4HB30-0XB0Product type designation SM 1232AQ 2x14 bitErrors/accuraciesTemperature error (relative tooutput area)25°C ±0.3% to55°C ±0.6%total measurementrange6ES7 232-4HD30-0XB0SM 1232AQ 4 x 14bit25°C ±0.3% to55°C ±0.6%total measurementrangeBasic error limit (operationallimit at 25 °C)• Voltage, relative to output +/- 0,3 % +/- 0,3 %area• Current, relative to output +/- 0,3 % +/- 0,3 %areaInterference voltagesuppression forf = n x (fl +/- 1%),fl = interference frequency• common mode voltage, 12 V 12 Vmax.Interrupts/diagnostics/status informationAlarms•Alarms Yes Yes• Diagnostic alarm Yes YesDiagnoses• Diagnostic functions Yes Yes• Monitoring the supply YesYesvoltage to the electronics• Wire break Yes Yes• Short circuit Yes YesDiagnostics indication LED• for status of inputs Yes Yes• for maintenance Yes YesClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall (inpackaging)•Temperature- permissible temperaturerange• Atmospheric pressure acc.to IEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °C0.3 m; five times, inshipping package0.3 m; five times, inshipping package-40 °C ... +70 °C -40 °C ... +70 °C1080 to 660hPa 1080 to 660hPa95% 95%6ES7 232-4HB30-0XB0Product type designation SM 1232AQ 2x14 bitMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerange0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted6ES7 232-4HD30-0XB0SM 1232AQ 4 x 14bit0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted• Air pressure acc. toIEC 60068-2-13- permissible atmospheric 1080 ... 795 hPa 1080 ... 795 hPapressure• Concentration of pollutants-SO 2 at RH < 60% < 0.5 ppm < 0.5 ppmwithout condensation-H 2 S at RH < 60% < 0.1 ppm < 0.1 ppmwithout condensationDegree of protectionIP20 Yes YesStandards, approvals,certificatesCE mark Yes YesC-TICK Yes YesFM approval Yes YesMechanicsType of housing (front)•Plastic Yes YesDimensions and weightDimensions• Width 45 mm 45 mm• Height 100 mm 100 mm•Depth 75 mm 75 mmWeight• Weight, approx. 180 g 180 g4/68 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modules■ Ordering dataOrder No.SM 1232 analog outputsignal module2 analog outputs, ±10 V with C 6ES7 232-4HB30-0XB014 bits or 0 ... 20 mA with 13 bits4 analog outputs, ±10 V with C 6ES7 232-4HD30-0XB014 bits or 0 to 20 mA with 13 bitsAccessoriesExtension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules; length 2 mS7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic; D 6ES7 822-0AA00-0YA7on DVD, 14-day trialB: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992SM 1232 analog output module■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4Siemens ST 70 N · 20104/69

SIMATIC S7-1200Analog modules© Siemens AG 2010SB 1232 analog output module4■ Overview• Analog output for the SIMATIC S7-1200• Can be plugged direct into the CPU■ ApplicationThe SB 1232 analog output signal board permits the use of analog■ Functionoutputs.This provides users with the following advantages:• Optimal adaptation:Signal boards can be used where space is limited or if only afew additional inputs/outputs are required. Each S7-1200 CPUcan be modularly expanded by a signal board. This does notincrease the mounting space required for the controller.• Direct connection of sensors and actuators:Up to 14 bit resolution and different output ranges permit theconnection of actuators without additional amplifier.• Flexibility:If the task is expanded subsequently, the controller can beupgraded. Updating of the user program is extremely simple.■ DesignThe signal boards are plugged directly into the receptacle on thefront of each S7-1200 CPU.• Mounting:Signal boards are plugged directly into the SIMATIC S7-1200CPU and are thus electrically and mechanically connected tothe CPU.• The CPU mounting dimensions remain unchanged.• All signal boards are easy to replace thanks to removable connectingterminals ("independent wiring").The SB 1232 analog output signal board converts digital signalsof the S7-1200 into analog signals for the process.■ Technical specifications6ES7 232-4HA30-0XB0Product type designation SB 1232 1 x AOSupply voltagesPower supply to thetransmitters• Supply current, max. 25 mACurrent consumptionfrom backplane bus 5 V DC, 15 mAtyp.Power lossPower loss, typ.1.5 WAnalog outputsNumber of analog outputs 1Cycle time (all channels)max.Output ranges, voltage• -10 to +10 VOutput ranges, current• 0 to 20 mAVoltage: 300 μS (R), 750 μS (1 uF)Current: 600 ms (1 mH); 2 ms (10 mH)YesYes6ES7 232-4HA30-0XB0Product type designation SB 1232 1 x AOLoad impedance (in ratedrange of output)• with voltage outputs, min. 1 000 Ω• with current outputs, max. 600 ΩAnalog value creationMeasurement principle DifferentialIntegrations and conversiontime/ resolution per channel• Resolution (incl. overrange) V / 12 bits, I / 11 bitsSmoothing of measuredvalues• parameterizableYesAnalog value generation(in isochronous mode)Cable length• Max. cable length, shielded 10 m; twistedErrors/accuraciesTemperature error25°C ±0.5% ... 55°C ±1%(relative to output area)4/70 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modulesSB 1232 analog output module■ Technical specifications (continued) ■ Ordering data Order No.6ES7 232-4HA30-0XB0Product type designation SB 1232 1 x AOInterrupts/diagnostics/status informationAlarms•AlarmsYesDiagnoses• Diagnostic functions YesDiagnostics indication (LED)• for status of outputs YesClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall 0.3 m; five times, in shipping package(in packaging)• Atmospheric pressure acc.to IEC 60068-2-13- permissible atmospheric 1080 to 660hPapressure• Relative humidity- permissible range 95%(without condensation)at 25 °CMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerangeDegree of protectionIP20MechanicsType of housing (front)• PlasticDimensions and weightDimensions• Width• Height•DepthWeight• Weight, approx.0 °C ... 55 °C when horizontally mounted0 °C ... 45 °C when vertically mountedYesYes38 mm62 mm21 mm40 gSB 1232 analog outputsignal board1 analog output, ±10 V with C 6ES7 232-4HA30-0XB012 bits or 0 ... 20 mA with 11 bitsAccessoriesTerminal block (spare part)for signal boardwith 6 screws, gold-plated; C 6ES7 292-1BF30-0XA04 pcs.S7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D9924■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 20104/71

SIMATIC S7-1200Analog modules© Siemens AG 2010SM 1234 analog input/output module4■ Overview■ Technical specifications6ES7 234-4HE30-0XB0Product type designation SM 1234 AI 4 x13 bit AQ 2 x14 bitSupply voltagesRated value•24 V DC YesCurrent consumptionCurrent consumption, typ. 60 mAfrom backplane bus 5 V DC, 80 mAtyp.Power lossPower loss, typ.2WConnection methodrequired front connector YesAnalog inputs• Analog inputs and outputs for the SIMATIC S7-1200Number of analog inputs 4; Current or voltage differential inputspermissible input frequency ± 35 V• With extremely short conversion timesfor current input (destruction• For connecting analog actuators and sensors without additionalamplifiers• For solving even more complex automation taskslimit), max.permissible input current forvoltage input (destructionlimit), max.40 mA■ ApplicationCycle time (all channels)max.625 µsSM 1234 analog input/outputs permit the use of analogTechnical unit for temperaturemeasurement adjustableinputs/outputs.This provides users with the following advantages:•VoltageYes; ±10 V, ±5 V, ±2.5 V• Optimal adaptation:• CurrentYes; 0 to 20 mAWith analog and digital expansion modules, users can optimallymatch their controllers even to more complex tasks • ThermocoupleNo• Direct connection of sensors and actuators:• Resistance thermometer NoUp to 14 bit resolution plus sign and different input/output • ResistanceNoranges permit the connection of sensors and actuators withoutInput ranges (rated values),an additional amplifiervoltages• Flexibility:If the task is expanded subsequently, the controller can beupgraded. Updating of the user program is extremely simple• -10 V to +10 V• Input resistanceYes≥9 Mohms(-10 V to +10 V)■ DesignThe SM 1234 analog input/output signal modules have the samedesign features as the basic devices.• Installation on DIN rails:The modules are snapped onto the rail next to the CPU on theright and are electrically and mechanically connected to eachother and to the CPU by the integral slide mechanism.• Direct installation:Horizontal or vertical mounting on DIN rail or direct mountingin the cabinet using integral lugs.■ FunctionThe SM 1234 analog input/output signal modules• convert analog signals from the process into digital signals forinternal processing by the SIMATIC S7-1200.• convert digital signals of the SIMATIC S7-1200 into signals forcontrolling the respective process.• -2.5 V to +2.5 V• Input resistance(-2.5 V to +2.5 V)• -5 V to +5 V• Input resistance(-5 V to +5 V)Input ranges (rated values),currents• 0 to 20 mA• Input resistance(0 to 20 mA)Voltage input• permissible input voltagefor voltage input (destructionlimit), max.Yes≥9 MohmsYes≥9 MohmsYes≥ 250 ohms35 V4/72 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modulesSM 1234 analog input/output module■ Technical specifications (continued)6ES7 234-4HE30-0XB06ES7 234-4HE30-0XB0Product type designationSM 1234 AI 4 x13 bit AQ 2 x14 bitProduct type designationSM 1234 AI 4 x13 bit AQ 2 x14 bitCurrent input• permissible input currentfor current input (destructionlimit), max.40 mABasic error limit (operationallimit at 25 °C)• Voltage, relative to outputarea+/- 0,3 %Temperature compensation• Temperature compensation NoparameterizableAnalog outputsNumber of analog outputs 2; Current or voltageOutput ranges, voltage• -10 to +10 VYesOutput ranges, current• 0 to 20 mAYesLoad impedance (in ratedrange of output)• with voltage outputs, min. 1000Ω• with current outputs, max. 600 ΩAnalog value creationMeasurement principle DifferentialIntegrations and conversiontime/ resolution per channel• Resolution (incl. overrange) Voltage: 14 bits; Current : 13 bits• Resolution with overrange 12 bit; + sign(bit including sign), max.• Integration time, parameterizableYes• Interference voltage suppressionfor interferencefrequency f1 in HzSmoothing of measuredvalues• parameterizable• Step: None• Step: Low•Step: Medium• Step: HighErrors/accuraciesTemperature error(relative to input area)Temperature error(relative to output area)Basic error limit(operational limit at 25 °C)• Voltage, relative to inputarea• Current, relative to inputarea40 dB, DC to 60 V for interferencefrequency 50 / 60 HzYesYesYesYesYes25°C ±0.1% to 55°C ±0.2%total measurement range25°C ±0.3% to 55°C ±0.6%total measurement range+/- 0,1 %+/- 0,1 %• Current, relative to outputareaInterference voltagesuppression forf = n x (fl +/- 1%),fl = interference frequency• common mode voltage,max.Interrupts/diagnostics/status informationAlarms•Alarms• Diagnostic alarmDiagnoses• Diagnostic functions• Monitoring the supplyvoltage to the electronics• Wire break• Short circuitDiagnostics indication (LED)• for status of inputs• for status of outputs• for maintenanceGalvanic isolationGalvanic isolation analogoutputs• between the channels andthe power supply of theelectronicsClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall(in packaging)•Temperature- permissible temperaturerange• Atmospheric pressure acc.to IEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °C+/- 0,3 %12 VYesYesYesYesYesYesYesYesYesNo0.3 m; five times, in shipping package-40 °C ... +70 °C1080 to 660 hPa95%4Siemens ST 70 N · 20104/73

SIMATIC S7-1200Analog modules© Siemens AG 2010SM 1234 analog input/output module4■ Technical specifications (continued) ■ Ordering data Order No.6ES7 234-4HE30-0XB0Product type designation SM 1234 AI 4 x13 bit AQ 2 x14 bitMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerange• Atmospheric pressureacc. to IEC 60068-2-13- permissible atmosphericpressure• Concentration of pollutants-SO 2 at RH < 60%without condensation-H 2 S at RH < 60%without condensationDegree of protectionIP20Standards, approvals,certificatesCE markC-TICKFM approvalMechanicsType of housing (front)• PlasticDimensions and weightDimensions• Width• Height•DepthWeight• Weight, approx.0 °C ... 55 °C when horizontally mounted0 °C ... 45 °C when vertically mounted1080 ... 795 hPa< 0.5 ppm< 0.1 ppmYesYesYesYesYes45 mm100 mm75 mm220 gSM 1234 analog input/outputsignal module4 analog inputs, ±10 V, ±5 V, C 6ES7 234-4HE30-0XB0±2.5 V, or 0 ... 20 mA,12 bits + sign;2 analog outputs, ±10 V with14 bits or 0 ... 20 mA with 13 bitsAccessoriesExtension cable for two-tier C 6ES7 290-6AA30-0XA0configurationfor connecting digital/analogsignal modules; length 2 mS7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/74 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modulesSM 1231 Thermocouple module■ Overview• To measure temperatures easily and with high accuracy• 7 common thermocouple types can be used• Also for measurement of analog signals with low level(±80 mV)• Easy to retrofit in existing systems■ Field of applicationThe SM 1231 thermocouple module is a highly accurate temperaturesensor using standard thermocouples. Low-level analogsignals in the range of ±80 mV can also be detected. TheSM 1231 thermocouple modules can be used with the CPU ofthe S7-1200 series.■ ConstructionThe SM 1231 thermocouple modules have the sameconstruction features as other modules in the S7-1200 series:Mounting on DIN rails:• The modules are snapped onto the rails next to the CPU on theright and are connected to each other and to the CPU 12xx bymeans of the integrated backplane bus.• Direct installation:The module can also be screwed directly to the wall using thepre-drilled holes. This installation method is recommended incases of high vibration load.• Thermocouples:In each case, 4 thermocouples of types J, K, T, E, R, S and Ncan be used. They are connected directly to the modulewithout amplifiers.• Installation site• Thermocouple modules should be installed in locations withlow fluctuations in temperature to ensure the highest measurementand repeat accuracy.■ Function• Different measuring ranges:Thermocouples of types J, K, T, E, R, S and N;Analog signal recording ±80 mV.• Testing for open lines.• Faults caused by contact voltages at the connection betweenthermocouple and module are prevented; when recordinganalog signals (±80 mV), the compensation is automaticallydeactivated.• Temperature scale:The measured temperature can be displayed in °C or °F.■ Technical specifications6ES7 231-5QD30-0XB0Product type designation Thermocouple module SM 1231Current consumptionfrom load voltage L+60 mA(no-load), max.from 5 V DC backplane bus, max. 87 mAPower lossPower loss, typ.1.8 WConnection systempluggable IO terminalsYesAnalog inputsNumber of analog inputs 4Max. cable length, shielded 100 m; to sensorCable loop resistance100 ΩRefresh time (all channels) 405 msInput ranges (rated values),voltages• -80 mV to +80 mVYesInput ranges (rated values),thermocouples• Type EYes• Type JYes• Type KYes• Type NYes• Type RYes• Type SYes• Type TYesInput ranges (rated values),resistors• permissible input voltage for 30 Vvoltage input (destruction limit),max.Formation of analog valuesMeasuring principleSigma-DeltaIntegration and conversion time/resolution per channel• Resolution with overrange (bits 16 bits; temperature 0.1 °C / 0.1 °Fincluding sign), max.• Noise suppression for interferencefrequency f1 in Hz85 dB at 50 / 60 / 400 HzRange of conversion values thatcan be displayed• bipolar signals -27 648 to +27 648Errors/accuraciesCold connection point +/-1.5 °CRepeat accuracy in settled state at +/- 0.05 %25 °C (relative to input range)Operational limit over entire temperaturerange• Voltage, related to the output +/- 0.1 %range4Siemens ST 70 N · 20104/75

SIMATIC S7-1200Analog modules© Siemens AG 2010SM 1231 Thermocouple module4■ Technical specifications (continued) ■ Ordering data Order No.6ES7 231-5QD30-0XB0Product type designation Thermocouple module SM 1231Noise suppression forf = n x (fl +/- 1 %),fl = interfering frequency• Common-mode voltage, max. 120 V; AC• Common-mode interference, min. 120 dB; at AC 120 VIsolationIsolation of analog inputs• Isolation analog inputsYesDimensions and weightDimensions• Width45 mm• Height100 mm•Depth75 mmWeight• Weight, approx.180 gThermocouple module SM 1231 C 6ES7 231-5QD30-0XB0Inputs +/- 80 mV,resolution 15 bit + sign,thermocouple types J, K, S, T, R,E, N; 4 inputsAccessoriesS7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/76 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Analog modulesSM 1231 RTD signal module■ Overview■ Technical specifications• To measure temperatures easily and with high accuracy• 4 inputsProduct type designation6ES7 231-5PD30-0XB0SM 1231 RTD signal module• The most common resistance temperature detectors can be Current consumptionusedfrom load voltage L+ (no load), 60 mA• Easy to retrofit in existing systemsmax.from 5 V DC backplane bus, max. 87 mA■ Field of applicationPower lossThe SM 1231 RTD modules permit high-precision temperaturerecording using standard resistance temperature detectors.They can be used with CPU 1211, 1212 and 1214.Power loss, typ.Connection system1.8 W; sensor: 1 mW■ Constructionpluggable IO terminalsYesAnalog inputsThe SM 1231 RTD modules have the same construction featuresas other modules in the S7-1200 series:• Mounting on DIN rails:The modules are snapped onto the rails next to the CPU on theright and are connected to each other and to the CPU 12xx bymeans of the integrated backplane bus.• Direct installation:Number of analog inputsMax. cable length, shieldedCable loop resistanceRefresh time (all channels)Input ranges (rated values),resistance thermometer4100 m; to sensor20 Ω; max. 2.7 Ω for Cu405 ms; 700 ms for Pt10000The module can also be screwed directly to the wall using the • Cu 10Yespre-drilled holes. This installation method is recommended incases of high vibration load.• Ni 10Yes• The most common resistance temperature detectors can beused: Pt 100, Pt 200, Pt 500, Pt 1000, Pt 10000, Ni 100, Ni 120,Ni 1000, Cu 10, FS 150, FS 30, FS 600. The resistance temperaturedetectors are connected directly to the module withoutamplifiers, whereby they must all be of the same type. Thedetectors can be connected with 2, 3 or 4 lines.• Ni 1000• Ni 120• Pt 100• Pt 1000• Pt 10000YesYesYesYesYes• Installation site:• Pt 200YesThe RTD module should be installed in locations with lowfluctuations in temperature to ensure the highest measurement• Pt 500Yesand repeat accuracy.• DIP switches:Input ranges (rated values),resistorsThe required settings, e.g. selection of the connected resistancedetectors, are made using the DIP switches on the• 0 to 150 ΩYes• 0 to 300 ΩYesmodule.• 0 to 600 ΩYes■ Function• Resistance temperature detectors of types Pt 100, Pt 200, Pt500, Pt 1000, Pt 10000, Ni 100, Ni 120, Ni 1000, Cu 10, FS 150,FS 30, FS 600.• Temperature scale:The measured temperature can be displayed in °C or °F.• permissible input voltage forvoltage input (destruction limit),max.Formation of analog valuesMeasuring principleIntegration and conversiontime/resolution per channel• Resolution with overrange(bits including sign), max.• Noise suppression for interferencefrequency f1 in HzRange of conversion values thatcan be displayed30 V;DC 30 V (sensor),DC 5 V (source)Sigma-Delta16 bits; temperature 0.1 °C / 0.1 °F85 dB at 50 / 60 / 400 Hz• bipolar signals -27 648 to +27 648Errors/accuraciesRepeat accuracy in settled state +/- 0.05 %at 25 °C (relative to input range)4Siemens ST 70 N · 20104/77

SIMATIC S7-1200Analog modules© Siemens AG 2010SM 1231 RTD signal module4■ Technical specifications (continued) ■ Ordering data Order No.6ES7 231-5PD30-0XB0Product type designation SM 1231 RTD signal moduleOperational limit over entiretemperature range• Voltage, related to the output +/- 0.1 %rangeNoise suppression forf = n x (fl +/- 1 %),fl = interfering frequency• Common-mode voltage, max. 0 V• Common-mode interference, min. 120 dB; at AC 120 VIsolationIsolation of analog inputs• Isolation analog inputsYesDimensions and weightDimensions• Width45 mm• Height100 mm•Depth75 mmWeight• Weight, approx.220 gSM 1231 RTD signal module C 6ES7 231-5PD30-0XB04 inputs for resistance temperaturedetectorsPt100/200/500/1000/10000,Ni100/120/1000, Cu10;resistors 150/300/600 ohms,resolution 15 bits + signAccessoriesS7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/78 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200SIPLUS analog modulesSIPLUS SM 1231, SM 1232, SM 1234■ Overview SIPLUS SM 1231 analog input module■ Overview SIPLUS SM 1232 analog output module4• Analog inputs for SIMATIC S7-1200• With extremely short conversion times• For connecting analog sensors without additional amplifiers• For solving even more complex automation tasks• Analog outputs for SIMATIC S7-1200• With extremely short conversion times• For connecting analog actuators without additional amplifiers• For solving even more complex automation tasksFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data1) ISA -S71.04 severity level GX from October 2010SIPLUS SM 12316AG1 231-4HD30-2XB06ES7 231-4HD30-0XB0-25 ... +70 °C; condensationpermissibleResistant in accordance withEN60721 to chemically (-3C4),mechanically (-3S4) and biologically(-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer toEnvironmental conditions ofSIPLUS extreme (on pg. 4/4) orgo towww.siemens.com/siplusextremeThe technical data of the standardproduct apply with theexception of the environmentalconditions.Order No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data1) ISA -S71.04 severity level GX from October 2010SIPLUS SM 12326AG1 232-4HB30-2XB06ES7 232-4HB30-0XB0-25 ... +70 °C; condensationpermissibleResistant in accordance withEN60721 to chemically (-3C4),mechanically (-3S4) and biologically(-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer toEnvironmental conditions ofSIPLUS extreme (on pg. 4/4) orgo towww.siemens.com/siplusextremeThe technical data of the standardproduct apply with theexception of the environmentalconditions.Siemens ST 70 N · 20104/79

SIMATIC S7-1200SIPLUS analog modules© Siemens AG 2010SIPLUS SM 1231, SM 1232, SM 12344■ Overview SIPLUS SM 1234 analog input/output module• Analog inputs and outputs for the SIMATIC S7-1200• With extremely short conversion times• For connecting analog actuators and sensors without additionalamplifiers• For solving even more complex automation tasksFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data1) ISA -S71.04 severity level GX from October 2010SIPLUS SM 12346AG1 234-4HE30-2XB06ES7 234-4HE30-0XB0-25 ... +70 °C; condensationpermissibleResistant in accordance withEN60721 to chemically (-3C4),mechanically (-3S4) and biologically(-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer toEnvironmental conditions ofSIPLUS extreme (on pg. 4/4) orgo towww.siemens.com/siplusextremeThe technical data of the standardproduct apply with theexception of the environmentalconditions.■ Ordering dataAnalog input moduleSignal Module SIPLUS SM 1231(extended temperature range andmedial exposure)4 analog inputs ±10 V, ±5 V, C±2.5 V, or 0 ... 20 mA12 bit + sign;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%Analog output moduleSignal Module SIPLUS SM 1232(extended temperature range andmedial exposure)2 analog outputs,C±10 V with 14 bit or0 ... 20 mA with 13 bit;from +60 °C to +70 °C number ofsimultaneously controllable inputsand outputs max. 50%Analog input/output moduleSignal Module SIPLUS SM 1234(extended temperature range andmedial exposure)4 analog inputs, ±10 V,C±5 V, ±2.5 V, or 0 ... 20 mA,12 bit + sign;2 analog outputs, ±10 V with14 bit or 0 ... 20 mA with 13 bitAccessoriesOrder No.6AG1 231-4HD30-2XB06AG1 232-4HB30-2XB06AG1 234-4HE30-2XB0see S7-1200 analog modules,pages 4/66, 4/69, 4/74C: Subject to export regulations: AL: N and ECCN: EAR99H4/80 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200SIPLUS analog modules■ Overview■ Ordering dataSIPLUS SB 1232 analog output moduleAnalog output moduleSignal Board SIPLUS SB 1232(extended temperature range andmedial exposure)1 analog output, ±10 V with C12 bit or 0 ... 20 mA with 11 bitAccessoriesOrder No.6AG1 232-4HA30-5XB0see S7-1200 analog modules,page 4/71C: Subject to export regulations: AL: N and ECCN: EAR99H4• Analog output for the SIMATIC S7-1200• Can be plugged direct into the CPUFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data1) ISA -S71.04 severity level GX from October 2010SIPLUS SB 12326AG1 232-4HA30-5XB06ES7 232-4HA30-0XB0-25 ... +55 °C;condensation permissibleResistant in accordance withEN60721 to chemically (-3C4),mechanically (-3S4) and biologically(-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer toEnvironmental conditions ofSIPLUS extreme (on pg. 4/4) orgo towww.siemens.com/siplusextremeThe technical data of the standardproduct apply with theexception of the environmentalconditions.Siemens ST 70 N · 20104/81

SIMATIC S7-1200Special modules© Siemens AG 2010SIM 1274 simulator4■ Overview• Simulator module for program testing during commissioningand ongoing operation• Simulation of 8 or 14 inputs■ ApplicationThe SM 1274 simulator modules for SIMATIC S7-1200 provideusers with the opportunity for testing user programs during commissioningand ongoing operation.■ DesignThe input simulators are mounted on the terminal block insteadof the digital inputs.The front of the module contains:• Input status selector switch• Connecting brackets for secure connection with the terminalblock■ FunctionProgram execution can be specifically influenced by setting theinputs.The CPU reads the set input signal statuses, and processesthem in the user program. The subsequent response of the controllerallows conclusions to be drawn concerning program execution.■ Technical specifications6ES7 274-1XH30-0XA0Product type designation SIM 127414 Ch DI SimulatorSupply voltagesRated value• 24 V DC Yes YesDegree of protectionIP20 Yes Yes6ES7 274-1XF30-0XA0SIM 12748 Ch DI Simulator■ Ordering dataOrder No.Digital input simulatorSIM 1274 simulator module(optional)with 14 input switches,C 6ES7 274-1XH30-0XA0for CPU 1214Cwith 8 input switches,C 6ES7 274-1XF30-0XA0for CPU 1211C, CPU 1212CAccessoriesS7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/82 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200CommunicationCM 1241 communication module■ Overview• For quick, high-performance serial data exchange via pointto-pointconnection• Implemented protocols: ASCII, USS drive protocol, ModbusRTU• Additional protocols can also be loaded• Simple parameterization with STEP 7 Basic■ FunctionThe following standard protocols are available on the CM 1241communication modules:• ASCII:For interfacing to third-party systems with simple transmissionprotocols, e.g. protocols with start and end characters or withblock check characters. The interface handshake signals canbe called and controlled via the user program.•MODBUS:For communication according to the MODBUS protocol withRTU format:-MODBUS master:Master-slave interfacing with SIMATIC S7 as master.- MODBUS slave:Master-slave interfacing with SIMATIC S7 as slave; messageframe traffic from slave to slave not possible.• USS drive protocol:Instructions for connection of USS protocol drives are especiallysupported. In this case, drives exchange data overRS485. It is then possible to control these drives, and to readand write parameters.Further drivers for downloading are also available.ParameterizationParameterization of the CM 1241 communication module is particularlyuser-friendly and simple with STEP 7 Basic:• The user assigns the module characteristics via a parameterizationenvironment integrated in STEP 7 Basic, e.g.:■ Application- the implemented protocol drivers that are used.The CM 1241 communication modules are used for quick, highperformanceserial data exchange via point-to-point connection.- the driver-specific characteristics that are used.Point-to-point connection is possible to, e.g.:■ Technical specifications• SIMATIC S7 automation systems and the systems of many6ES7 241-1CH30- 6ES7 241-1AH30-other manufacturers0XB00XB0• PrintersProduct type designation CM 1241 RS485 CM 1241 RS232• Robot controlsSupply voltages• ModemsRated value• Scanners•24 V DC Yes Yes• Bar code readers, etc.• permissible range, 20.4 V 20.4 Vlower limit (DC)■ Design• permissible range, 28.8 V 28.8 VThe CM 1241 communication modules have the same designfeatures as the basic devices.upper limit (DC)Current consumption• Installation on DIN rails:Current consumption, max. 220 mA;220 mA;The modules are snapped onto the rail next to the CPU on thefrom L5+; logic from L5+; logicright and are electrically and mechanically connected to eachother and to the CPU by the integral slide mechanism.Power loss• Direct installation:Power loss, typ. 1.1 W 1.1 WHorizontal or vertical mounting on DIN rail or direct mounting Interfacesin the cabinet using integral lugs.Number of interfaces 1 1The communication modules are equipped with the following:• Status LEDs for indicating “Send”, “Receive” and “Error”Interface physics,RS 232C (V.24)Yes• Communication interfaces:Available for the RS232 and RS485 physical transmissionmediaInterface physics,RS 422/RS 485 (X.27)Point-to-pointYesCable length, max. 1 000 m 10 m4Siemens ST 70 N · 20104/83

SIMATIC S7-1200Communication© Siemens AG 2010CM 1241 communication module4■ Technical specifications (continued) ■ Ordering data Order No.6ES7 241-1CH30-0XB06ES7 241-1AH30-0XB0Product type designation CM 1241 RS485 CM 1241 RS232Integrated protocol driver• ASCIIYes; available aslibrary function•USSYes; available aslibrary functionClimatic and mechanicalconditions for storage andtransportClimatic conditions forstorage and transport• Free fall- Max. height of fall(in packaging)•Temperature- permissible temperaturerange• Air pressure acc. toIEC 60068-2-13- permissible atmosphericpressure• Relative humidity- permissible range(without condensation)at 25 °CMechanical and climaticconditions during operationClimatic conditions duringoperation• Temperature- permissible temperaturerange- permissible temperaturechange0.3 m; five times, inshipping package0.3 m; five times, inshipping package-40 °C ... +70 °C -40 °C ... +70 °C1080 to 660hPa 1080 to 660hPa95% 95%0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted5 °C ... 55 °C,3 °C/ min0 °C ... 55 °C whenhorizontallymounted0 °C ... 45 °C whenvertically mounted5 °C ... 55 °C,3 °C/ min• Air pressure acc. toIEC 60068-2-13- permissible atmospheric 1080 ... 795 hPa 1080 ... 795 hPapressureSoftwareRuntime software• Target system- S7-1200 Yes YesDimensions and weightDimensions• Width 30 mm 30 mm• Height 100 mm 100 mm•Depth 75 mm 75 mmWeight• Weight, approx. 150 g 150 gCM 1241communication moduleCommunication module for C 6ES7 241-1CH30-0XB0point-to-point connection,with one RS485 interfaceCommunication module for C 6ES7 241-1AH30-0XB0point-to-point connection,with one RS232 interfaceAccessoriesS7-1200 automation system,System ManualFor SIMATIC S7-1200 andSTEP 7 BasicGerman B 6ES7 298-8FA30-8AH0English B 6ES7 298-8FA30-8BH0French B 6ES7 298-8FA30-8CH0Spanish B 6ES7 298-8FA30-8DH0Italian B 6ES7 298-8FA30-8EH0Chinese B 6ES7 298-8FA30-8KH0S7-1200 automation system,Easy BookBrief instructionsGerman B 6ES7 298-8FA30-8AQ0English B 6ES7 298-8FA30-8BQ0French B 6ES7 298-8FA30-8CQ0Spanish B 6ES7 298-8FA30-8DQ0Italian B 6ES7 298-8FA30-8EQ0Chinese B 6ES7 298-8FA30-8KQ0STEP 7 Basicengineering softwareTarget system:SIMATIC S7-1200 controllers andthe associated I/O.The WinCC Basic which isincluded permits configuration ofthe SIMATIC Basic PanelsRequirement:MS Windows XP SP3 /MS Windows Vista SP1Type of delivery:German, English,with online documentationSingle license D 6ES7 822-0AA00-0YA0STEP 7 Basic Software Update D 6ES7 822-0AA00-0YL0Service, 1 yearTrial License STEP 7 Basic;on DVD, 14-day trialD 6ES7 822-0AA00-0YA7B: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D992■ More informationBrochuresInformation material for downloading can be found in theInternet:http://www.siemens.com/simatic/printmaterial4/84 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Communication■ OverviewCSM 1277 unmanaged■ DesignThe CSM 1277 compact switch module offers all advantages ofthe SIMATIC S7-1200 design:• Compact design;the rugged plastic enclosure contains:- 4 x RJ45 sockets for connecting to Industrial Ethernet- 3-pole plug-in terminal strip for connection of the external24 V DC supply on the top- LEDs for diagnostics and for status display of the IndustrialEthernet ports• Simple mounting on the mounting rail of the S7-1200• Fanless and therefore low-maintenance design• The module can be replaced without using a programmingdevice4• Unmanaged switch for connecting a SIMATIC S7-1200 to anIndustrial Ethernet network with a line, tree or star topology• Multiplication of Ethernet interfaces on a SIMATIC S7-1200 foradditional connection of up to three programming devices,operator controls, and further Ethernet nodes• Simple, space-saving mounting on the SIMATIC S7-1200mounting rail• Low-cost solution for implementing small, local Ethernet networks• Connection without any problems using RJ45 standard connectors• Simple and fast status display via LEDs on the device• Integral autocrossover function permits use of uncrossed connectingcables■ Benefits• Reduction in assembly costs and mounting space comparedto use of external network components• Fast commissioning, as no configuration is necessary• Flexible expansion of the network by simply inserting the CSM■ ApplicationThe CSM 1277 is an Industrial Ethernet switch of compact designfor use in the SIMATIC S7-1200. The CSM 1277 can beused to multiply the Ethernet interface of the SIMATIC S7-1200for simultaneous communication with operator panels, programmingdevices, other controllers, or the office world.The CSM 1277 and the SIMATIC S7-1200 controller can be usedto implement simple automation networks at low cost.■ Function• Multiplication of Ethernet interfaces of the SIMATIC S7-1200• Design of a small, local Industrial Ethernet network with threefurther nodes• Automatic detection of data transfer rate by means of autosensingand autocrossover functions• LEDs for diagnostics and for status displayNetwork topology and network configurationVarious network topologies can be implemented using theCSM 1277 compact switch module:• Connection of SIMATIC S7-1200 in linear topology:at least one RJ45 connection of the SIMATIC S7-1200 remainsvacant, e.g. for connecting a programming device (PG)• Connection of SIMATIC S7-1200 to a higher-level network in atree/star topology:at least two RJ45 connections of the SIMATIC S7-1200 remainvacant, e.g. for connecting a programming device/operatorpanel (PG/OP)• Design of a small, local network with a SIMATIC S7-1200 andthree further Ethernet nodesConfigurationThe CSM 1277 compact switch module is an unmanaged switchand need not be configured.DiagnosticsThe following information is displayed on LEDs on the device:• Power• Port status• Data trafficSiemens ST 70 N · 20104/85

SIMATIC S7-1200Communication© Siemens AG 20104CSM 1277 unmanaged■ Technical specificationsProduct type designation CSM 1277Data transmission rateTransmission rate 1Transmission rate 2Interfaces6GK7 277-1AA00-0AA010 Mbit/s100 Mbit/sMaximum number of electrical/ 4optical connections for networkcomponents or terminal equipmentNumber of electrical connections• For network components or 4terminal equipment• For power supply 1Design of electrical connection• For network components or RJ45 portterminal equipment• For power supply3-pin terminal blockSupply voltage, current consumption,power lossType of power supplyDCSupply voltage, external24 V•Minimum19.2 V• Maximum28.8 VCurrent consumption, maximum 0.07 AProduct component: fusing of Yespower supply inputType of fusing of power supply input 0.5 A / 60 VEffective power loss at 24 V with DC 1.6 WPermitted ambient conditionsAmbient temperature• During operating phase 0…60 °C• During storage -40 … +70 °C• During transport -40 … +70 °CRelative humidity at 25 °C without 95 %condensation during operatingphase, maximumIP degree of protection IP 206GK7 277-1AA00-0AA0Product type designation CSM 1277Design, dimensions and weightsType of constructionSIMATIC S7-1200 device designWidth45 mmHeight100 mmDepth75 mmNet weight0.15 kgType of mounting• 35 mm DIN rail mountingYes• Wall mountingNo• S7-300 rail mountingNoProduct properties, functions,components GeneralProduct function: switch-managed NoStandards, specifications,approvalsStandard• For EMC from FM FM3611: Class 1, Division 2,Group A, B, C, D / T.., CL.1,Zone 2, GP. IIC, T.. Ta• For Ex zone EN 600079-15:2005,EN 600079-0:2006,II 3 G Ex nA II T4,KEMA 08 ATEX 0003 X• For CSA and UL safety UL 508, CSA C22.2 No. 142• For emitted interference EN 61000-6-4• For noise immunity EN 61000-6-2Certificate of suitability EN 61000-6-2, EN 61000-6-4• CE markYes•C-TickYes4/86 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200CommunicationCSM 1277 unmanaged■ Ordering data Order No. Order No.CSM 1277compact switch moduleUnmanaged switch for connectinga SIMATIC S7-1200 and up to6GK7 277-1AA00-0AA0three further nodes to IndustrialEthernet with 10/100 Mbit/s;4 x RJ45 ports; external 24 V DCpower supply, diagnostics onLEDs, S7-1200 module includingelectronic manual on CD-ROMAccessoriesIE TP Cord RJ45/RJ45TP cable 4 x 2 with 2 RJ45connectors• 0.5 m6XV1 870-3QE50•1 m 6XV1 870-3QH10•2 m 6XV1 870-3QH20•6 m 6XV1 870-3QH60• 10 m6XV1 870-3QN10IE FC TP Standard Cable GP2x2 (TypeA)4-core, shielded TP installationcable for connection toIE FC Outlet RJ45/IE FC RJ45 Plug; PROFINETcompatible;with UL approval;sold by the meter;max. length 1000 m,minimum order quantity 20 mIE FC stripping toolPreadjusted stripping tool for faststripping of the Industrial EthernetFC cablesIE FC Outlet RJ45For connecting Industrial EthernetFC cables and TP cords; graduatedprices for 10 and 50 units ormoreSIMATIC NET Manual CollectionElectronic manuals on communicationssystems, protocols,products; on DVD;German/English6XV1 840-2AH106GK1 901-1GA006GK1 901-1FC00-0AA06GK1 975-1AA00-3AA04■ More informationTo assist in selecting the right Industrial Ethernet switches aswell as configuration of modular variants, the Switch SelectionTool is available as a free download at:http://support.automation.siemens.com/WW/view/en/39134641Siemens ST 70 N · 20104/87

SIMATIC S7-1200SIPLUS communication© Siemens AG 20104SIPLUS CM 1241 communication module■ Overview■ Ordering dataSIPLUS CM 1241communication module(extended temperature range andmedial exposure)Communication module for Cpoint-to-point connection,with one RS485 interfaceCommunication module for Cpoint-to-point connection,with one RS232 interfaceAccessoriesOrder No.6AG1 241-1CH30-2XB06AG1 241-1AH30-2XB0see CM 1241 communicationmodule, page 4/84C: Subject to export regulations: AL: N and ECCN: EAR99H• For quick, high-performance serial data exchange via pointto-pointconnection• Implemented protocols: ASCII, USS drive protocol, ModbusRTU• Additional protocols can also be loaded• Simple parameterization with STEP 7 BasicFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical dataSIPLUS CM 12416AG1 241-1CH30- 6AG1 241-1AH30-2XB02XB06ES7 241-1CH30- 6ES7 241-1AH30-0XB00XB0-25 ... +70 °C; condensation permissibleResistant in accordance with EN60721 tochemically (-3C4), mechanically (-3S4)and biologically (-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer to Environmentalconditions of SIPLUS extreme (onpg. 4/4) or go towww.siemens.com/siplus-extremeThe technical data of the standard productapply with the exception of the environmentalconditions.1) ISA -S71.04 severity level GX from October 20104/88 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Power supplies■ Overview• Stabilized power supply for SIMATIC S7-1200• In S7-1200 design• Input 120/230 V AC, output 24 V DC/2.5 APM 1207 power supply■ Technical specificationsPM 1207 power supplyOrder No.6EP1 332-1SH71Input voltage, rated value120/230 V AC (autoranging)• Range85…132 V/176...264 V ACMains buffering > 20 ms (at 93/187 V)Line frequency, rated value 50/60 Hz• Range47…63 HzInput current, rated value1.2/0.67 A• Switch-on current (25 °C) < 13 A• Recommended miniaturecircuit-breakerOutput voltage, rated value16 A characteristic B,10 A characteristic C24 V DC• Tolerance ± 3%• Residual ripple< 150 mVpp• Adjustment rangeNoOutput current, rated value 2.5 AApprox. efficiency at rated values 83%Connectable in parallelYes, 2 unitsElectronic short-circuit protection Yes, automatic restartRadio suppression levelClass B(EN 55022)Status displayGreen LED for "24 V OK"Line harmonic limitationNot applicable(EN 61000-3-2)Degree of protection (EN 60529) IP20Safety class Class 1Galvanic isolationSELV acc. to EN 60950 andEN 50178Ambient temperature 0 … +60 °CTransport/storage temperature -25 … +85 °CMounting Standard mounting rail EN 6071535x7.5/15Dimensions (W x H x D) in mm 70 x 100 x 75Approx. weight0.3 kgCertificationCE, cULus4■ Ordering dataPM 1207 power supplyInput 120/230 V AC,output 24 V DC/2.5 AOrder No.6EP1 332-1SH71Siemens ST 70 N · 20104/89

SIMATIC S7-1200SIPLUS power supplies© Siemens AG 2010SIPLUS PM 1207 power supply■ Overview■ Ordering dataSIPLUS PM 1207power supply(extended temperature range andmedial exposure)Input 120/230 V AC,output 24 V DC/2.5 A;Derating from +55°C ... +70 °Cto 1.5 A output currentOrder No.6AG1 332-1SH71-7AA04• Stabilized power supply for SIMATIC S7-1200• In S7-1200 design• Input 120/230 V AC, output 24 V DC/2.5 AFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuSIPLUS PM 1207Order No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data6AG1 332-1SH71-7AA06EP1 332-1SH71-25 ... +70 °C; condensation permissibleResistant in accordance with EN60721 tochemically (-3C4), mechanically (-3S4)and biologically (-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX 1) .For further information, refer to Environmentalconditions of SIPLUS extreme (onpg. 4/4) or go towww.siemens.com/siplus-extremeThe technical data of the standard productapply with the exception of the environmentalconditions.1) ISA -S71.04 severity level GX from October 20104/90 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Operator control and monitoringBasic Panels■ Overview• The ideal entry level series of 3.8" to 15" for operating andmonitoring compact machines and plants• Clear process representation thanks to use of pixel-graphicsdisplays• Intuitive operation using Touch and tactile function keys• Equipped with all the necessary basic functions such as alarmlogging, recipe management, plots, vector graphics, and languageswitching• Simple connection to the controller via integral Ethernet interfaceor separate version with RS485/422■ Benefits• Integral component of Totally Integrated Automation (TIA):Increased productivity, minimum engineering overhead, reductionin life-cycle costs- Can be used even where installation space is restrictedthanks to vertical configuring (4" and 6" devices)- Short configuring and commissioning times- Service-friendly thanks to maintenance-free design and longservice life of the backlighting display• Simple and user-friendly representation of process valuesthanks to, for example, input/output fields, vector graphics,trend curves, bar charts, text and bitmaps• Graphics library available with off-the-shelf picture objects• Can be used worldwide:- 32 languages can be configured (incl. Asian and Cyrilliccharacter sets)- You can switch between up to 5 languages online- Language-dependent texts and graphics■ ApplicationThe SIMATIC HMI Basic Panels can be used wherever compactmachines and plants are controlled and monitored locally - inproduction, process and building automation alike. They areused in the most diverse sectors and applications.■ DesignThe SIMATIC HMI Basic Panels are installation-compatible withthe existing touch devices of the product family of Panels andMulti Panels.• KTP400 Basic mono3.8" STN mono1 Ethernet interface (TCP/IP)Touch screen and 4 tactile function keys• KTP600 Basic mono5.7" STN mono1 Ethernet interface (TCP/IP)Touch screen and 6 tactile function keys• KTP600 Basic color5.7" TFT with 256 colors1 Ethernet interface (TCP/IP) or 1 RS 485/422 interface(separate version)Touch screen and 6 tactile function keys• KTP1000 Basic color10.4" TFT with 256 colors1 Ethernet interface (TCP/IP) or 1 RS 485/422 interface(separate version)Touch screen and 8 tactile function keys• TP1500 Basic color15.1” TFT with 256 colors1 Ethernet interface (TCP/IP)Touch screen• No slot for SD/CF/MultiMedia Card, no USB interface■ Function• Input/output fieldsfor displaying and modifying process parameters•Buttonsare used for direct triggering of functions and actions. Up to16 functions can be configured simultaneously on buttons.•Graphicscan be used as icons instead of text to "label" function keys orbuttons. They can also be used as full-screen backgroundimages.The configuration tool contains a library with extensive graphicsand diverse objects. All editors with an OLE interface canbe used as graphics editors, e.g. PaintShop, Designer orCorelDraw, etc.• Vector graphicsSimple geometric basic forms (line, circle and rectangle) canbe created direct in the configuring tool• Fixed textsfor labeling function keys, process images and processvalues in different font sizes• Curve functions and barsare used for graphical display of dynamic values• Language switching:- 5 online languages, 32 configuration languages includingAsian and Cyrillic character sets- language-dependent texts and graphics• User administration (security) in accordance with the requirementsof the different sectors- authentication with user ID and password- user-group-specific rights4Siemens ST 70 N · 20104/91

SIMATIC S7-1200Operator control and monitoring© Siemens AG 2010Basic Panels4■ Function (continued)• Signaling system- discrete alarms- analog messages- freely definable message classes (e.g. status/fault messages)for defining acknowledgment response and displayingmessage events- message history• Recipe management• Help textsfor process screens, messages and variables• Arithmetic functions• Limit value monitoringfor reliable process control of inputs and outputs• Indicator lightfor indicating machine and plant statuses• Scheduler for global function execution in case of globalevents• Template concept for creation of screen templates (screenelements configured in the template appear in every screen)• Simple maintenance and configuration thanks to:- backup/restore of configuration, operating system and firmwareon a PC using ProSave- configuration download via MPI/PROFIBUS DP or Ethernet- automatic transfer identification- individual contrast setting and calibration (except KTP600)- clean screen- no battery requiredConfigurationConfiguration is implemented with the engineering softwareSIMATIC WinCC flexible 2008 Compact or with WinCC BasicV10.5, which is a component of STEP 7 Basic V10.5(only PROFINET-based device versions).■ IntegrationThe Basic Panels can be connected to:• SIMATIC S7 controllers• Non-Siemens controllers (applies for DP devices)- Allen Bradley DF1- Modicon Modbus RTU- Mitsubishi FX 1)- Omron Hostlink/Multilink 1)• Non-Siemens controllers (non-Siemens drivers for PNdevices)- Modicon Modbus TCP/IP 1)1) WinCC flexible 2008 SP2 and higherNote:Further information can be found under "System interfaces".■ Technical specificationsProduct type designation6AV6 647-0AA11-3AX0KTP400 Basicmono PN6AV6 647-0AB11-3AX0KTP600 Basicmono PN6AV6 647-0AD11-3AX0KTP600 Basiccolor PN6AV6 647-0AF11-3AX0KTP1000 Basiccolor PN6AV6 647-0AG11-3AX0TP1500 Basiccolor PNSupply voltageSupply voltage 24 V DC 24 V DC 24 V DC 24 V DC 24 V DCpermissible range+19.2 V to +28.8 V DC +19.2 V to +28.8 V DC +19.2 V to +28.8 V DC +19.2 V to +28.8 V DC +19.2 V to +28.8 V DCRated current 0.07 A 0.24 A 0.35 A 0.6 A 0.24 AMemoryType Flash / RAM Flash / RAM Flash / RAM Flash / RAM Flash / RAMUsable memory for user data 512 KB usable memoryfor user dataTime of dayClock• TypeSoftware clock,not battery backed512 KB usable memoryfor user dataSoftware clock,not battery backed512 KB usable memoryfor user dataSoftware clock,not battery backed1024 KB usablememory for user dataSoftware clock,not battery backed1024 KBusable memory foruser dataSoftware clock,not battery backedProtocolsProtocols (terminal link)• Sm@rtAccess No No No No NoConfigurationConfiguration toolWinCC flexible CompactWinCC flexible Com-WinCC flexible Com-WinCC flexible Com-WinCC flexible Com-Version 2008 SP1 pact Version 2008 SP1 pact Version 2008 SP1 pact Version 2008 SP1 pact Version 2008 SP1or higher orWinCC Basic V10.5(to be ordered separately)or higher orWinCC Basic V10.5(to be ordered separately)or higher orWinCC Basic V10.5(to be ordered separately)or higher orWinCC Basic V10.5(to be ordered separately)or higher orWinCC Basic V10.5(to be ordered separately)4/92 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Operator control and monitoringBasic Panels■ Technical specifications (continued)Product type designation6AV6 647-0AA11-3AX0KTP400 Basicmono PN6AV6 647-0AB11-3AX0KTP600 Basicmono PN6AV6 647-0AD11-3AX0KTP600 Basiccolor PN6AV6 647-0AF11-3AX0KTP1000 Basiccolor PN6AV6 647-0AG11-3AX0TP1500 Basiccolor PNDisplayDisplay type STN, gray scales STN, gray scales TFT, 256 colors TFT, 256 colors TFT, 256 colorsSize3.8" (76.8 mm x57.6 mm)5.7" (115.2 mm x86.4 mm)5.7" (115.2 mm x86.4 mm)10.4" (211.2 mm x158.4 mm)15" (304.1 mm x228.1 mm)Resolution (WxH in pixel) 320 x 240 320 x 240 320 x 240 640 x 480 1024 x 768Backlighting• MTBF backlighting Approx. 30000 hours about 50,000 hours about 50,000 hours about 50,000 hours about 50,000 hours(at 25 °C)Operating modeControl elements Membrane keyboard Membrane keyboard Membrane keyboard Membrane keyboard Touch screenFunction keys,4 function keys 6 function keys 6 function keys 8 function keys NoneprogrammableConnection for mouse/ - / - / - - / - / - - / - / - - / - / - - / - / -keyboard/barcode readerTouch operation• Touch screen analog, resistive analog, resistive analog, resistive analog, resistive analog, resistive• Numeric/alphabetical input Yes (on-screen keyboard)/ Yes (onscreenkeyboard)Ambient conditionsYes (on-screen keyboard)/ Yes (onscreenkeyboard)Yes (on-screen keyboard)/ Yes (onscreenkeyboard)Yes (on-screen keyboard)/ Yes (onscreenkeyboard)Yes (on-screen keyboard)/ Yes (onscreenkeyboard)Mounting position vertical vertical vertical vertical verticalmaximum permissible angle +/- 35 ° +/- 35 ° +/- 35 ° +/- 35 ° +/- 35 °of inclination without externalventilationmax. relative humidity (in %) 90 % 90 % 90 % 90 % 90 %Temperature• Operation0 °C to +50 °C 0 °C to +50 °C 0 °C to +50 °C 0 °C to +50 °C 0 °C to +50 °C(vertical installation)• Operation (max. tilt angle) 0 °C to +40 °C 0 °C to +40 °C 0 °C to +40 °C 0 °C to +40 °C 0 °C to +40 °C• Transport, storage -20 °C to +60 °C -20 °C to +60 °C -20 °C to +60 °C -20 °C to +60 °C -20 °C to +60 °CDegree of protectionFront IP65, NEMA 4,NEMA 4x, NEMA 12(when installed)IP65, NEMA 4,NEMA 4x, NEMA 12(when installed)IP65, NEMA 4,NEMA 4x, NEMA 12(when installed)IP65, NEMA 4,NEMA 4x, NEMA 12(when installed)IP65, NEMA 4,NEMA 4x, NEMA 12(when installed)Rear IP20 IP20 IP20 IP20 IP20Certifications & standardsCertificationsCE, UL, cULus,NEMA 4, NEMA 4x,NEMA 12CE, UL, cULus,NEMA 4, NEMA 4x,NEMA 12CE, UL, cULus,NEMA 4, NEMA 4x,NEMA 12CE, UL, cULus,NEMA 4, NEMA 4x,NEMA 12CE, UL, cULus,NEMA 4, NEMA 4x,NEMA 12I/OI/O devices None None None None NoneType of outputLED colors None None None None NoneAcoustics Sound signal Sound signal Sound signal Sound signal Sound signalInterfacesInterfaces 1 x Ethernet (RJ45) 1 x Ethernet (RJ45) 1 x Ethernet (RJ45) 1 x Ethernet (RJ45) 1 x Ethernet (RJ45)PC card slot No No No No NoCF card slot No No No No NoMulti Media Card slot No No No No NoUSB No No No No NoEthernet 1 x Ethernet (RJ45) 1 x Ethernet (RJ45) 1 x Ethernet (RJ45) 1 x Ethernet (RJ45) 1 x Ethernet (RJ45)4Siemens ST 70 N · 20104/93

SIMATIC S7-1200Operator control and monitoring© Siemens AG 2010Basic Panels4■ Technical specifications (continued)Product type designation6AV6 647-0AA11-3AX0KTP400 Basicmono PN6AV6 647-0AB11-3AX0KTP600 Basicmono PN6AV6 647-0AD11-3AX0KTP600 Basiccolor PN6AV6 647-0AF11-3AX0KTP1000 Basiccolor PN6AV6 647-0AG11-3AX0TP1500 Basiccolor PNProcessorProcessor RISC 32 bit, 75 MHz RISC 32 bit, 75 MHz RISC 32 bit, 75 MHz RISC 32-bit, 200 MHz RISC 32-bit, 200 MHzFunctionality underWinCC flexibleApplications/options None None None None NoneNumber of Visual Basic Not possible Not possible Not possible Not possible Not possibleScriptsTask planner Yes Yes Yes Yes YesHelp system Yes Yes Yes Yes YesStatus/control Not possible Not possible Not possible Not possible Not possibleMessage system• Number of messages 200 200 200 200 200• Bit messages Yes Yes Yes Yes Yes• Analog messages Yes Yes Yes Yes Yes• Message bufferRing buffer(n x 256 entries),non-retentive 1)Ring buffer(n x 256 entries),non-retentive 1)Ring buffer(n x 256 entries),non-retentive 1)Ring buffer(n x 256 entries),non-retentive 1)Ring buffer(n x 256 entries),non-retentive 1)Recipes• Recipes 5 5 5 5 5• Data records per recipe 20 20 20 20 20• Entries per data record 20 20 20 20 20• Recipe memory40 KB integratedFlash40 KB integratedFlash40 KB integratedFlash40 KB integratedFlash40 KB integratedFlashNumber of process images• Process images 50 50 50 50 50•Variables 250 1)2) 500 1)2) 500 1)2) 500 1)2) 500 1)2)• Limit values Yes Yes Yes Yes Yes• Multiplexing Yes Yes Yes Yes YesImage elements• Text objects 500 text elements 500 text elements 500 text elements 500 text elements 500 text elements• Graphics objectBit maps, icons, icon(full-screen), vectorgraphicsBit maps, icons, icon(full-screen), vectorgraphicsBit maps, icons, icon(full-screen), vectorgraphicsBit maps, icons, icon(full-screen), vectorgraphicsBit maps, icons, icon(full-screen), vectorgraphics• dynamic objects Diagrams Diagrams Diagrams Diagrams DiagramsLists• Text lists 150 150 150 150 150•Graphics list 100 100 100 100 100• Libraries Yes Yes Yes Yes YesSecurity• Number of user groups 50 50 50 50 50• Passwords exportable No No No No No• Number of user rights 32 32 32 32 32Data carrier support•PC card No No No No No• CF card No No No No No• Multi Media Card No No No No NoRecording• Recording/Printing PROFINET PROFINET PROFINET PROFINET PROFINET1) WinCC flexible 2008 SP2 and higher2) WinCC Basic V10.5 SP2 and higher (component of STEP 7 Basic V10.5 SP2)4/94 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Operator control and monitoringBasic Panels■ Technical specifications (continued)Product type designation6AV6 647-0AA11-3AX0KTP400 Basicmono PN6AV6 647-0AB11-3AX0KTP600 Basicmono PN1) WinCC flexible 2008 SP2 and higher2) WinCC Basic V10.5 SP2 and higher (component of STEP 7 Basic V10.5 SP2)6AV6 647-0AD11-3AX0KTP600 Basiccolor PN6AV6 647-0AF11-3AX0KTP1000 Basiccolor PN6AV6 647-0AG11-3AX0TP1500 Basiccolor PNFonts• Keyboard fontsUS American (English) US American (English) US American (English) US American (English) US American (English)Languages• Online languages 5 5 5 5 5• Configuration languages D, GB, F, I, E,CHN "traditional",CHN "simplified", DK,FIN, GR, J, KP / ROK,NL, N, PL, P, RUS, S,CZ / SK, TR, H• Character setsTahoma, WinCC flexibleStandard, symbollanguagesTransfer (upload/download)• Transfer of configuration Ethernet, automatictransfer recognitionProcess coupling• Connection to controller S7-200, S7-1200 2) ,S7- 300/400, Modicon(Modbus TCP/IP) 1) ,see catalog ST 80,chapter "System interfaces"D, GB, F, I, E,CHN "traditional",CHN "simplified", DK,FIN, GR, J, KP / ROK,NL, N, PL, P, RUS, S,CZ / SK, TR, HTahoma, WinCC flexibleStandard, symbollanguagesEthernet, automatictransfer recognitionS7-200, S7-1200 2) ,S7- 300/400, Modicon(Modbus TCP/IP) 1) ,see catalog ST 80,chapter "System interfaces"D, GB, F, I, E,CHN "traditional",CHN "simplified", DK,FIN, GR, J, KP / ROK,NL, N, PL, P, RUS, S,CZ / SK, TR, HTahoma, WinCC flexibleStandard, symbollanguagesEthernet, automatictransfer recognitionS7-200, S7-1200 2) ,S7- 300/400, Modicon(Modbus TCP/IP) 1) ,see catalog ST 80,chapter "System interfaces"D, GB, F, I, E,CHN "traditional",CHN "simplified", DK,FIN, GR, J, KP / ROK,NL, N, PL, P, RUS, S,CZ / SK, TR, HTahoma, WinCC flexibleStandard, symbollanguagesEthernet, automatictransfer recognitionS7-200, S7-1200 2) ,S7- 300/400, Modicon(Modbus TCP/IP) 1) ,see catalog ST 80,chapter "System interfaces"D, GB, F, I, E,CHN "traditional",CHN "simplified", DK,FIN, GR, J, KP / ROK,NL, N, PL, P, RUS, S,CZ / SK, TR, HTahoma, WinCC flexibleStandard, symbollanguagesEthernet, automatictransfer recognitionS7-200, S7-1200 2) ,S7- 300/400, Modicon(Modbus TCP/IP) 1) ,see catalog ST 80,chapter "System interfaces"Expandability/openness• Open Platform Program No No No No NoDimensionsFront of enclosure (W x H) 140 mm x 116 mm 214 mm x 158 mm 214 mm x 158 mm 335 mm x 275 mm 400 mm x 310 mmMounting cutout/Device depth (W x H/D)in mmWeightWeight123 mm x 99 mm/40 mm device depth197 mm x 141 mm/44 mm device depth197 mm x 141 mm/44 mm device depth310 mm x 248 mm/60 mm device depth• Weight 0.32 kg 1.07 kg 1.07 kg 2.65 kg 4.2 kg367 mm x 289 mm/60 mm device depth4Siemens ST 70 N · 20104/95

SIMATIC S7-1200Operator control and monitoring© Siemens AG 2010Basic Panels4■ Ordering data Order No. Order No.SIMATIC KTP400 Basic Bmono PNStarter kit for SIMATIC KTP400 DBasic mono PNSIMATIC KTP600 Basic Bmono PNStarter kit for SIMATIC KTP600 DBasic mono PNSIMATIC KTP600 Basic Bcolor PNStarter kit for SIMATIC KTP600 DBasic color PNSIMATIC KTP1000 Basic Bcolor PNStarter kit for SIMATIC KTP1000 DBasic color PNSIMATIC TP1500 Basic color PN BStarter kits consist of:• the relevant SIMATIC KTP BasicPanel• SIMATIC WinCC flexible Compactengineering software• SIMATIC HMI Manual Collection(DVD),5 languages (English, French,German, Italian, Spanish),comprising: all currently availableuser manuals, manuals andcommunication manuals forSIMATIC HMI• Ethernet cable on PN devicesStarter kit SIMATIC S7-1200 + DKTP400 Basicconsisting of:• SIMATIC HMI KTP400 Basicmono PN• SIMATIC S7-1200 CPU 1212CAC/DC/Rly• SIMATIC S7-1200 SimulatorModule SIM 1274• SIMATIC STEP 7 BASIC CD• SIMATIC S7-1200 HMI ManualCollection CD• Ethernet CAT5 cable, 2 mStarter kit SIMATIC S7-1200 + DKTP600 Basicconsisting of:• SIMATIC HMI KTP600 Basiccolor PN• SIMATIC S7-1200 CPU 1212CAC/DC/Rly• SIMATIC S7-1200 SimulatorModule SIM 1274• SIMATIC STEP 7 BASIC CD• SIMATIC S7-1200 HMI ManualCollection CD• Ethernet CAT5 cable, 2 m6AV6 647-0AA11-3AX06AV6 652-7AA01-3AA06AV6 647-0AB11-3AX06AV6 652-7BA01-3AA06AV6 647-0AD11-3AX06AV6 652-7DA01-3AA06AV6 647-0AF11-3AX06AV6 652-7FA01-3AA06AV6 647-0AG11-3AX06AV6 651-7AA01-3AA06AV6 651-7DA01-3AA0A: Subject to export regulations: AL: N and ECCN: EAR99SB: Subject to export regulations: AL: N and ECCN: EAR99TConfiguration• All device versions:see catalog ST 80with SIMATIC WinCC flexibleCompact• PROFINET-based devicesee STEP 7 Basic, page 7/2versions: with WinCC BasicV10.5 (component ofSTEP 7 Basic V10.5)Documentation (to be ordered separately)You can find the manual for theBasic Panels on the Internet athttp://support.automation.siemens.comWinCC flexible Compact/Standard/AdvancedUser Manual• German6AV6 691-1AB01-3AA0•English6AV6 691-1AB01-3AB0• French6AV6 691-1AB01-3AC0• Italian6AV6 691-1AB01-3AD0• Spanish6AV6 691-1AB01-3AE0User ManualWinCC flexible Communication• German6AV6 691-1CA01-3AA0•English6AV6 691-1CA01-3AB0• French6AV6 691-1CA01-3AC0• Italian6AV6 691-1CA01-3AD0• Spanish6AV6 691-1CA01-3AE0SIMATIC HMI Manual Collection A 6AV6 691-1SA01-0AX0Electronic documentation,on DVD5 languages (English, French,German, Italian and Spanish);contains: all currently availableuser manuals, manuals andcommunication manuals forSIMATIC HMIAccessoriesAccessories for supplementary See catalog ST 80, HMI softwareorderingD: Subject to export regulations: AL: N and ECCN: 5D9924/96 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-1200Operator control and monitoringBasic Panels■ Dimensional drawingsAll dimensions in mm.309122SIEMENSSIMATIC PANELSIEMENSSIMATIC PANEL41169814040 6.2G_ST80_XX_00355KTP400 BasicKTP1000 Basic196SIEMENS15814027524733560.2 6.2G_ST80_XX_00357366G_ST80_XX_00358SIEMENSSIMATIC PANELTOUCHSIMATIC PANEL31028821444 6.2G_ST80_XX_0035640059.9 6.2KTP600 Basic■ More informationAdditional information is available in the internet under:http://www.siemens.com/panelsTP1500 BasicNote:Do you require a specific modification to or supplement for theproducts described here? Look in the catalog ST 80 under"Customized products". We provide information there aboutadditional and generally available sector products, and aboutthe customer-specific modification and adaptation options.Siemens ST 70 N · 20104/97

SIMATIC S7-1200Software© Siemens AG 20104Software■ Overview• Software for the SIMATIC S7-1200• Functions for all phases of the automation project:- configuring and parameterizing the hardware- specifying the communication- programming in LAD (Ladder Diagram) and FBD (FunctionBlock Diagram)- configuration of the visualization- test, commissioning, and serviceThe following is available:• STEP 7 BasicAdditional informationen see page 7/2.■4/98 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-3005/2 Central processing units5/2 Standard CPUs5/2 CPU 3125/2 CPU 3145/2 CPU 315-2 DP5/2 CPU 315-2 PN/DP5/3 CPU 317-2 PN/DP5/17 Fail-safe CPUs5/17 CPU 315F-2 DP5/17 CPU 315F-2 PN/DP5/18 CPU 317F-2 PN/DP5/30 SIPLUS digital modules5/30 SIPLUS SM 322 digital output module5/31 Analog modules5/31 SM 331 analog input module5/34 F digital / analog modules5/34 SM 326 F digital input module -Safety Integrated5/36 SM 326 F digital output module -Safety Integrated5/39 SIPLUS F digital-/analog modules5/39 SIPLUS SM 326 F digital input module5/40 SIPLUS SM 336 F analog input module5/41 Function modules5/41 IM 174 PROFIBUS module5/44 SIPLUS SIWAREX U5/45 Communication5/45 SIPLUS CP 3405/46 CP 3415/48 SIPLUS CP 3415/49 SIPLUS CP 343-1 Lean5/50 CP 343-1 ERPC5/54 CP 343-1 BACnet5/57 CSM 377 unmanaged5/59 Power suppliesBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs■ Overview CPU 312■ Overview CPU 315-2 DP5• The entry level CPU in Totally Integrated Automation (TIA)• For smaller applications with moderate requirements for processingperformanceSIMATIC Micro Memory Card required for operation of CPU.• The CPU with medium to large program memory and quantitystructures for optional use of SIMATIC engineering tools• High processing power in binary and floating-point arithmetic• PROFIBUS DP master/slave interface• For comprehensive I/O expansion• For configuring distributed I/O structuresSIMATIC Micro Memory Card required for operation of CPU.■ Overview CPU 314■ Overview CPU 315-2 PN/DP• For plants with medium requirements for program size• High processing power in binary and floating-point arithmeticSIMATIC Micro Memory Card required for operation of CPU.• The CPU with mid-range program memory and quantityframeworks• High processing power in binary and floating-point arithmetic• Used as central controller in production lines with central anddistributed I/O• Component Based Automation (CBA) on PROFINET• PROFINET proxy for intelligent devices on PROFIBUS DP inComponent Based Automation (CBA)• PROFINET IO Controller for operating distributed I/O onPROFINET• PROFINET interface with 2-port switch• Combined MPI/PROFIBUS DP master/slave interface• Isochronous mode on PROFIBUSSIMATIC Micro Memory Card required for operation of CPU.5/2 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing units■ Overview CPU 317-2 PN/DPStandard CPUs• The CPU with a large program memory and quantity frameworkfor demanding applications• For cross-sector automation tasks in series machine, specialmachine and plant construction• Used as central controller in production lines with central anddistributed I/O• High processing power in binary and floating-point arithmetic• Distributed intelligence in Component Based Automation(CBA) on PROFINET• PROFINET proxy for intelligent devices on PROFIBUS DP inComponent Based Automation (CBA)• PROFINET I/O Controller for operating distributed I/O onPROFINET• PROFINET interface with 2-port switch• Combined MPI/PROFIBUS DP master/slave interface• For comprehensive I/O expansion• For configuring distributed I/O structures• Isochronous mode on PROFIBUS• Optionally supports the use of SIMATIC engineering toolsSIMATIC Micro Memory Card required for operation of CPU.5■ Technical specifications6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPProduct versionassociated programmingpackageSTEP 7 > V 5.4 + SP5or STEP 7 as of V5.2 +SP1 with HSP 176STEP 7 > V 5.4 + SP5or STEP 7 as of V5.2 +SP1 with HSP 175STEP 7 > V 5.4 + SP5or STEP 7 as of V5.2 +SP1 with HSP 177STEP 7 > V 5.4 + SP5or STEP 7 as of V5.4 +SP4 with HSP 189Supply voltagesRated value• 24 V DC Yes Yes Yes Yes Yes• permissible range, 20.4 V 20.4 V 20.4 V 20.4 V 20.4 Vlower limit (DC)• permissible range, 28.8 V 28.8 V 28.8 V 28.8 V 28.8 Vupper limit (DC)external protection for Min. 2 A Min. 2 A Min. 2 A Min. 2 A Min. 2 Asupply cables(recommendation)Current consumptionCurrent consumption 650 mA 650 mA 850 mA 750 mA 750 mA(rated value)Current consumption 140 mA 140 mA 150 mA 150 mA 150 mA(in no-load operation), typ.Inrush current, typ. 3.5 A 3.5 A 3.5 A 4A 4AI²t 1A²⋅s 1A²⋅s 1A²⋅s 1A²⋅s 1A²⋅sfrom supply voltage L+, max. 650 mA 650 mA 900 mAPower lossPower loss, typ. 4W 4W 4.5 WMemoryWork memory• integrated32 Kibyte; For 128 Kibyte; For 256 Kibyte 384 Kibyte 1Mbyteprogram and data program and data• expandable No No No No NoSTEP 7 > V 5.4 + SP5or STEP 7 as of V5.4 +SP4 with HSP 189Siemens ST 70 N · 20105/3

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPWork memory• Size of retentive memory for 32 Kibyte 64 Kibyte 128 Kibyte 128 Kibyte 256 Kibyteretentive data blocksLoad memory• pluggable (MMC) Yes Yes Yes Yes Yes• pluggable (MMC), max. 8Mbyte 8Mbyte 8Mbyte 8Mbyte 8MbyteBackup• presentYes;guaranteed by MMC(maintenance-free)Yes;guaranteed by MMC(maintenance-free)Yes;guaranteed by MMC(maintenance-free)Yes;guaranteed by MMC(maintenance-free)Yes;guaranteed by MMC(maintenance-free)• without batteryCPU/ blocksDB• Number, max.Yes;Program and data1 024; Number range:1 to 16000Yes;Program and data1 024; Number range:1 to 16000Yes;Program and data1 024; Number range:1 to 16000Yes;Program and data1 024; Number range:1 to 16000Yes;Program and data2 048; Number range:1 to 16000• Size, max. 32 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteFB• Number, max.1 024; Number range: 1 024; Number range: 1 024; Number range: 1 024; Number range: 2 048; Number range:0 to 79990 to 79990 to 79990 to 79990 to 7999• Size, max. 32 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteFC• Number, max.1 024; Number range:0 to 79991 024; Number range:0 to 79991 024; Number range:0 to 79991 024; Number range:0 to 7999• Size, max. 32 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteOB• Size, max. 32 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteNesting depth• per priority class 16 16 16 16 16• additional within an error 4 4 4 4 4OBCPU/ processing timesfor bit operations, min. 0.1 µs 0.06 µs 0.05 µs 0.05 µsfor word operations, min. 0.24 µs 0.12 µs 0.09 µs 0.09 µs 0.03 µsfor fixed point arithmetic, 0.32 µs 0.16 µs 0.12 µs 0.12 µs 0.04 µsmin.for floating point arithmetic, 1.1 µs 0.59 µs 0.45 µs 0.45 µs 0.16 µsmin.Times/counters and theirretentivityS7 counter• Number 256 256 256 256 512• Retentivity- can be set Yes Yes Yes Yes Yes- lower limit 0 0 0 0 0- upper limit 255 255 255 255 511• Counting range- can be set Yes Yes Yes Yes Yes- lower limit 0 0 0 0 0- upper limit 999 999 999 999 999IEC counter• present Yes Yes Yes Yes Yes• Type SFB SFB SFB SFB SFB2 048; Number range:0 to 79995/4 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsStandard CPUs■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPS7 times• Number 256 256 256 256 512• Retentivity- can be set Yes Yes Yes Yes Yes- lower limit 0 0 0 0 0- upper limit 255 255 255 255 511- preset no retentivity no retentivity no retentivity no retentivity no retentivity• Time range- lower limit 10 ms 10 ms 10 ms 10 ms 10 ms- upper limit 9 990 s 9 990 s 9 990 s 9 990 s 9 990 sIEC timer• present Yes Yes Yes Yes Yes• Type SFB SFB SFB SFB SFBData areas and theirretentivityFlag• Number, max. 256 byte 256 byte 2 048 byte 2 048 byte 4096byte• Retentivity available Yes; MB 0 to MB 255 Yes; MB 0 to MB 255 Yes; MB 0 to MB 2047 Yes; MB 0 to MB 2047 Yes; MB 0 to MB 4095• Number of clock memories 8; 1 memory byte 8; 1 memory byte 8; 1 memory byte 8; 1 memory byte 8; 1 memory byteData blocks• Number, max.1 024; Number range: 1 024; Number range: 1 024; Number range: 1 024; Number range: 2 048; Number range:1 to 160001 to 160001 to 160001 to 160001 to 16000• Size, max. 32 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte• Retentivity adjustableYes; via non-retainproperty on DBYes; via non-retainproperty on DBYes; via non-retainproperty on DBYes; via non-retainproperty on DBYes; via non-retainproperty on DB• Retentivity preset yes yes yes yes yesLocal data• per priority class, max. 32 Kibyte;Max. 2 KB per block32 Kibyte;Max. 2 KB per block32 Kibyte;Max. 2 KB per block32 Kibyte;Max. 2 KB per block32 Kibyte;Max. 2 KB per blockAddress areaI/O address area• overall 1024byte 1 024 byte 2 048 byte 2 048 byte 8192byte•Outputs 1024byte 1 024 byte 2 048 byte 2 048 byte 8192byte• of which, distributed- Inputs 2 048 byte 2 048 byte 8192byte-Outputs 2 048 byte 2 048 byte 8192byteProcess image• Inputs 1024byte 1 024 byte 2 048 byte 2 048 byte 8192byte•Outputs 1024byte 1 024 byte 2 048 byte 2 048 byte 8192byte• Inputs, adjustable 1024byte 1 024 byte 2 048 byte 2 048 byte 8192byte• Outputs, adjustable 1024byte 1 024 byte 2 048 byte 2 048 byte 8192byte• Inputs, default 128 byte 128 byte 128 byte 128 byte 256 byte• Outputs, default 128 byte 128 byte 128 byte 128 byte 256 byteSubprocess images• Number of subprocess1 1 1images, max.Digital channels• Inputs 256 1 024 16 384 16 384 65 536•Outputs 256 1 024 16 384 16 384 65 536• Inputs, of which central 256 1 024 1 024 1 024 1024• Outputs, of which central 256 1 024 1 024 1 024 10245Siemens ST 70 N · 20105/5

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPAnalog channels• Inputs 64 256 1 024 1 024 4096•Outputs 64 256 1 024 1 024 4096• Inputs, of which central 64 256 256 256 256• Outputs, of which central 64 256 256 256 256Hardware configurationCentral devices, max. 1 1 1 1 1Expansion devices, max. 0 3 3 3 3Racks, max. 1 4 4 4 4Modules per rack, max. 8 8 8 8 8Number of DP masters• integrated 0 0 1 1 1• via CP 4 4 4 4 4Number of operable FMsand CPs (recommended)•FM 8 8 8 8 8• CP, point-to-point 8 8 8 8 8•CP, LAN 4 10 10 10 10Time of dayClock• Hardware clockYes Yes Yes Yes(real-time clock)• Software clockYes• battery-backed andsynchronizableBuffered: NoCan be synchronized:YesYes Yes Yes Yes• Behavior of the clockfollowing POWER-ON• Behavior of the clockfollowing expiry of backupperiodThe clock continues atthe time of day it hadwhen power wasswitched offThe clock continues atthe time of day it hadwhen power wasswitched offThe clock continues atthe time of day it hadwhen power wasswitched offThe clock continues atthe time of day it hadwhen power wasswitched offThe clock continues atthe time of day it hadwhen power wasswitched off• Deviation per day, max. 10 s; Typ.: 2 s 10 s; Typ.: 2 s 10 s; Typ.: 2 s 10 s; Typ.: 2 s 10 s; Typ.: 2 sRuntime meter• Number 1 1 1 1 4• Number/Number range 0 0 0 0 0 to 3• Range of values0 to 2^31 hours(when using SFC 101)0 to 2^31 hours(when using SFC 101)0 to 2^31 hours(when using SFC 101)0 to 2^31 hours(when using SFC 101)0 to 2^31 hours(when using SFC 101)• Granularity 1 hour 1 hour 1 hour 1 hour 1 hour• retentiveYes; Must be restartedat each restartYes; Must be restartedat each restartYes; Must be restartedat each restartYes; Must be restartedat each restartYes; Must be restartedat each restartClock synchronization• supported Yes Yes Yes Yes Yes• to MPI, master Yes Yes Yes Yes Yes• to MPI, slave Yes Yes Yes Yes Yes• to DP, masterYes; on DP slave onlytime-of-day slaveYes; on DP slave onlytime-of-day slaveYes; on DP slave onlytime-of-day slave• to DP, slave Yes Yes Yes• in AS, master Yes Yes Yes Yes Yes• in AS, slave Yes Yes• on Ethernet via NTP Yes; as client Yes; as client5/6 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsStandard CPUs■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPS7 message functionsNumber of login stations formessage functions, max.6; Depending on theconnections configuredfor PG/OP andS7 basic communication12; Depending on theconnections configuredfor PG/OP andS7 basic communication16; Depending on theconnections configuredfor PG/OP andS7 basic communication16; Depending on theconnections configuredfor PG/OP andS7 basic communicationProcess diagnostic messagesYes Yes Yes Yes Yessimultaneously active 300 300 300 300 300Alarm-S blocks, max.Test commissioningfunctionsStatus/control• Status/control variable Yes Yes Yes Yes Yes•VariablesInputs, outputs,memory bits, DB,times, countersInputs, outputs,memory bits, DB,times, countersInputs, outputs,memory bits, DB,times, countersInputs, outputs,memory bits, DB,times, counters32; Depending on theconnections configuredfor PG/OP andS7 basic communicationInputs, outputs,memory bits, DB,times, counters• Number of variables, max. 30 30 30 30 30• of which status variables, 30 30 30 30 30max.• of which control variables, 14 14 14 14 14max.Forcing• Forcing Yes Yes Yes Yes Yes• Force, variables Inputs, outputs Inputs, outputs Inputs, outputs Inputs, outputs Inputs, outputs• Number of variables, max. 10 10 10 10 10Status blockYes; Up to 2 simultaneouslyYes; Up to 2 simultaneouslyYes; Up to 2 simultaneouslyYes; Up to 2 simultaneouslyYes; Up to 2 simultaneouslySingle step Yes Yes Yes Yes YesNumber of breakpoints 4 4 4 4 4Diagnostic buffer• present Yes Yes Yes Yes Yes• Number of entries, max. 500 500 500 500 500- can be set No No No No No- Of which powerfail-proof 100; Only the last 100entries are retained100; Only the last 100entries are retained100; Only the last 100entries are retained100; Only the last 100entries are retained100; Only the last 100entries are retained• Maximum number of entriesthat can be read in RUN- adjustable Yes; from 10 to 499 Yes; from 10 to 499 Yes; from 10 to 499 Yes; from 10 to 499 Yes; from 10 to 499- default 10 10 10 10 10Service data• can be read out Yes YesMonitoring functionsStatus LEDs Yes Yes Yes Yes YesCommunication functionsPG/OP communication Yes Yes Yes Yes YesData record routing Yes Yes YesRouting No No Yes; Max. 4 Yes YesGlobal data communication• supported Yes Yes Yes Yes Yes• Size of GD packets, max. 22 byte 22 byte 22 byte 22 byte 22 byteS7 basic communication• supported Yes Yes Yes Yes Yes5Siemens ST 70 N · 20105/7

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPS7 communication• supported Yes Yes Yes Yes YesS5-compatiblecommunication• supportedYes; via CP andloadable FCYes; via CP andloadable FCYes; via CP andloadable FCYes; via CP andloadable FCYes; via CP andloadable FCWeb server• Web serverYes;Read-only functionYes;Read-only function• Number of HTTP clients 5 5Open IE communication• TCP/IPYes; via integratedPROFINET interfaceand loadable FBsYes; via integratedPROFINET interfaceand loadable FBs- Number of connections,max.8 16• ISO-on-TCP (RFC1006)Yes; via integratedPROFINET interfaceand loadable FBsYes; via integratedPROFINET interfaceand loadable FBs- Number of connections,8 16max.- Data length, max. 32 768 byte 32 768 byte•UDPYes; via integratedPROFINET interfaceand loadable FBsYes; via integratedPROFINET interfaceand loadable FBs- Number of connections,8 16max.- Data length, max. 1 472 byte 1472byteNumber of connections• overall 6 12 16 16 32• usable for PG communication5 11 15 15 31• usable for OP communication5 11 15 15 31• usable for S7 basic communication2 8 12 14 30• usable for S7 communication14 16- reserved for0 0S7 communication- Adjustable for0 0S7 communication, min.- Adjustable for14 16S7 communication, max.• Max. total number ofinstances32 32• usable for routing X1 as MPI: max. 10;X1 as DP master:max. 24;X1 as DP slave(active): max. 14;X2 as PROFINET:max. 24PROFINET CBA (at set setpointcommunication load)• Setpoint for the CPUcommunication load• Number of remote interconnectionpartners50 % 50 %32 32X1 as MPI: max. 10;X1 as DP master:max. 24;X1 as DP slave(active): max. 14;X2 as PROFINET:max. 245/8 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsStandard CPUs■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPPROFINET CBA (at set setpointcommunication load)• Number of functions,30 30master/slave• Total of all Master/Slave1 000 1000connections• Data length of all incoming4 000 byte 4000byteconnections master/slave,max.• Data length of all outgoing4 000 byte 4000byteconnections master/slave,max.• Number of device-internal500 500and PROFIBUS interconnections• Data length of device-internal4 000 byte 4000byteund PROFIBUS inter-connections, max.• Data length per connection,1 400 byte 1400bytemax.• Remote interconnectionswith acyclic transmission- Sampling frequency:500 ms 500 msSampling time, min.- Number of incoming interconnections100 100- Number of outgoing interconnections100 100- Data length of all incoming2 000 byte 2000byteinterconnections,max.- Data length of all outgoing2 000 byte 2000byteinterconnections,max.- Data length per connection,1 400 byte 1400bytemax.• Remote interconnectionswith cyclic transmission- Transmission frequency:10 ms 10 msTransmission interval,min.- Number of incoming200 200interconnections- Number of outgoing200 200interconnections- Data length of all incoming2 000 byte 2000byteinterconnections,max.- Data length of all outgoing2 000 byte 2000byteinterconnections,max.- Data length per connection,450 byte 450 bytemax.• HMI variables viaPROFINET (acyclic)- Number of stations that3; 2x PN OPC/1x iMap 3; 2x PN OPC/1x iMapcan log on for HMIvariables (PN OPC/iMap)- HMI variable updating 500 ms 500 ms- Number of HMI variables 200 200- Data length of all HMIvariables, max.2 000 byte 2000byte5Siemens ST 70 N · 20105/9

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPPROFINET CBA (at set setpointcommunication load)• PROFIBUS proxy functionality- supported Yes Yes- Number of linked16 16PROFIBUS devices- Data length perconnection, max.240 byte; Slavedependent240 byte; Slavedependent1st interfaceType of interface Integrated RS 485interfaceIntegrated RS 485interfaceIntegrated RS 485interfaceIntegrated RS 485interfaceIntegrated RS 485interfacePhysics RS 485 RS 485 RS 485 RS 485 RS 485Isolated No No No Yes YesPower supply to interface 200 mA 200 mA 200 mA 200 mA 200 mA(15 to 30 V DC), max.Functionality•MPI Yes Yes Yes Yes Yes•DP master No No No Yes Yes• DP slave No No No Yes Yes• Point-to-point connection No No No No NoMPI• Number of connections 6 12 16 16 32• Services- PG/OP communication Yes Yes Yes Yes Yes- Routing No No Yes Yes Yes- Global data communicationYes Yes Yes Yes Yes- S7 basic communication Yes Yes Yes Yes Yes- S7 communication Yes Yes Yes Yes Yes- S7 communication,as clientNo No No No; but via CP andloadable FBNo; but via CP andloadable FB- S7 communication, Yes Yes Yes Yes Yesas server• Transmission speeds, max. 187.5 kbit/s 187.5 kbit/s 187.5 kbit/s 12 Mbit/s 12 Mbit/sDP master• Services- PG/OP communication Yes Yes- Routing Yes Yes- Global data communicationNoNo- S7 basic communication Yes; I blocks only Yes; I blocks only- S7 communication Yes Yes- S7 communication,NoNoas client- S7 communication,YesYesas server- Equidistance modeYesYessupport- Isochronous mode Yes; OB 61 Yes; OB 61- SYNC/FREEZE Yes Yes- Activation/deactivation ofYesYesDP slaves- Number of DP slaves that8 8can be simultaneouslyactivated/deactivated,max.-DPV1 Yes Yes5/10 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsStandard CPUs■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPDP master• Transmission speeds, max. 12 Mbit/s 12 Mbit/s• Number of DP slaves, max. 124 124• Address area- Inputs, max. 2 Kibyte 8 Kibyte-Outputs, max. 2 Kibyte 8 Kibyte• User data per DP slave- Inputs, max. 244 byte 244 byte-Outputs, max. 244 byte 244 byteDP slave• Services- PG/OP communication Yes Yes- Routing Yes; Only with activeinterfaceYes; Only with activeinterface- Global data communicationNoNo- S7 basic communication No No- S7 communication Yes Yes- S7 communication,NoNoas client- S7 communication,as serverYes;Connection configuredon one side onlyYes;Connection configuredon one side only- Direct data exchangeYesYes(slave-to-slave communication)-DPV1 No No• Transmission rate, max. 12 Mbit/s 12 Mbit/s• Transfer memory- Inputs 244 byte 244 byte-Outputs 244 byte 244 byte• Address area, max. 32 32• User data per address32 byte 32 bytearea, max.2nd interfaceType of interface integrated RS 485 PROFINETPROFINETinterfacePhysics RS 485 Ethernet RJ45 Ethernet RJ45Isolated Yes Yes YesIntegrated switch Yes YesNumber of ports 2 2Power supply to interface200 mA(15 to 30 V DC), max.automatic detection ofYes; 10/100 Mbit/s Yes; 10/100 Mbit/stransmission speedAutonegotiation Yes YesAutocrossing Yes YesFunctionality•MPI No No No•DP master Yes No No• DP slave Yes No No• PROFINET IO Controller Yes Yes• PROFINET CBA Yes Yes• Web serverYes;only read functionYes;only read function- Number of HTTP clients 5 5• Point-to-point connection No No No5Siemens ST 70 N · 20105/11

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPDP master• Number of connections,16max.• Services- PG/OP communication Yes- Routing Yes- Global data communicationNo- S7 basic communication Yes; I blocks only- S7 communication Yes- S7 communication,Noas client- S7 communication,Yesas server- Equidistance modeYessupport- Isochronous mode Yes; OB 61- SYNC/FREEZE Yes- Activation/deactivation ofYesDP slaves- Number of DP slaves that8can be simultaneouslyactivated/deactivated,max.-DPV1Yes• Transmission speeds, max.12 Mbit/s• Number of DP slaves, max.124; Per station• Address area- Inputs, max. 2 048 byte-Outputs, max.2 048 byte• User data per DP slave- Inputs, max. 244 byte-Outputs, max.244 byteDP slave• Number of connections 16• Services- PG/OP communication Yes- Routing Yes; Only with activeinterface- Global data communicationNo- S7 basic communication No- S7 communication,Noas client- S7 communication,Yesas server- Direct data exchangeYes(slave-to-slave communication)-DPV1No• GSD fileThe current GSD filecan be obtained from:http://www.siemens.com/profibus-gsd• Transmission rate, max.12 Mbit/s• automatic baud rate searchYes; only with passiveinterface• Transfer memory- Inputs 244 byte-Outputs244 byte5/12 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsStandard CPUs■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPDP slave• Address area, max. 32• User data per address32 bytearea, max.PROFINET IO Controller• Services- PG/OP communication Yes Yes- Routing Yes Yes- S7 communication Yes; with loadableFBs, max. configurableconnections:14, max. number ofinstances: 32Yes; with loadableFBs, max. configurableconnections:16, max. number ofinstances: 32- Isochronous mode No No- Open IE communication Yes; via TCP/IP, ISOon TCP and UDPYes; via TCP/IP, ISOon TCP and UDP• Transmission rate, max. 100 Mbit/s 100 Mbit/s• Total number of connectable128 128IO Devices, max.• Max. number of connectable128 128IO devices for RT- of which in line, max. 128 128• Number of IO Devices with128 128IRT and the option "highflexibility"- of which in line, max. 61 61• IRT, supported Yes Yes• Prioritized startup supportedYesYes- Number of IO Devices,32 32max.• Activation/deactivation ofYesYesIO Devices- Number of IO Devices8 8that can be simultaneouslyactivated/deactivated,max.• IO Devices changingYesYesduring operation (partnerports), supported- Max. number of IO8 8devices per tool• Device replacementYesYeswithout swap medium• Updating time250 µs - 128 ms (withsend cycle of 250 µs);500 µs - 256 ms (withsend cycle of 500 µs);1 ms - 512 ms (withsend cycle 1 ms);minimum value of thesend cycle is alsodependent on the setcommunication sharefor PROFINET IO, onthe number of IODevices250 µs - 128 ms (withsend cycle of 250 µs);500 µs - 256 ms (withsend cycle of 500 µs);1 ms - 512 ms (withsend cycle 1 ms);minimum value of thesend cycle is alsodependent on the setcommunication sharefor PROFINET IO, onthe number of IODevices• Address area- Inputs, max. 2 Kibyte 8 Kibyte-Outputs, max. 2 Kibyte 8 Kibyte5Siemens ST 70 N · 20105/13

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Technical specifications (continued)6ES7 312-1AE14-0AB06ES7 314-1AG14-0AB06ES7 315-2AH14-0AB06ES7 315-2EH14-0AB06ES7 317-2EK14-0AB0Product-type designation CPU 312 CPU 314 CPU 315-2 DP CPU 315-2 PN/DP CPU 317-2 PN/DPPROFINET IO Controller• User data per addressarea, max.- User data consistency,254 byte 254 bytemax.PROFINET CBA• acyclic transmission Yes Yes• cyclic transmission Yes YesOpen IE communication• Open IE communication,YesYessupported• Number of connections,max.8 8• Local port numbers used atthe system endCPU/ programmingProgramming language• STEP 7Yes; V5.2 SP1 orhigher with HWupdateYes; V5.2 SP1 orhigher with HWupdateYes; V5.2 SP1 orhigher with HWupdate0, 20, 21, 25, 80, 102,135, 161, 8 080,34 962, 34 963,34 964, 65 532,65 533, 65 534,65 535Yes; V5.4 SP4 orhigher with HWupdate0, 20, 21, 25, 80, 102,135, 161, 8 080,34 962, 34 963,34 964, 65 532,65 533, 65 534,65 535Yes; V5.4 SP4 orhigher with HWupdate•LAD Yes Yes Yes Yes Yes•FBD Yes Yes Yes Yes Yes•STL Yes Yes Yes Yes Yes•SCL Yes Yes Yes Yes Yes•CFC Yes Yes Yes Yes• GRAPH Yes Yes Yes Yes Yes• HiGraph ® Yes Yes Yes Yes YesCommand set See instruction list See instruction list See instruction list See instruction list See instruction listNesting levels 8 8 8 8 8User program protection/passwordYes Yes Yes Yes YesprotectionSystem functions (SFC) see instruction list see instruction list see instruction list see instruction list see instruction listSystem function blocks see instruction list see instruction list see instruction list see instruction list see instruction list(SFB)EnvironmentalrequirementsOperating temperature•Min. 0°C 0°C• max. 60 °C 60 °CDimensions and weightDimensions• Width 40 mm 40 mm 40 mm 40 mm 40 mm• Height 125 mm 125 mm 125 mm 125 mm 125 mm•Depth 130 mm 130 mm 130 mm 130 mm 130 mmWeight• Weight, approx. 270 g 280 g 290 g 340 g 340 g5/14 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsStandard CPUs■ Ordering data Order No. Order No.CPU 312 C 6ES7 312-1AE14-0AB0SIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearMain memory 32 KB,power supply 24 V DC, MPI;MMC requiredCPU 314 C 6ES7 314-1AG14-0AB0Main memory 128 KB,power supply 24 V DC, MPI;MMC requiredCPU 315-2 DP6ES7 315-2AH14-0AB0256 KB main memory,24 V DC power supply, MPI,PROFIBUS DP master/slaveinterface, MMC requiredCPU 315-2 PN/DP6ES7 315-2EH14-0AB0384 KB main memory,24 V DC power supply,combined MPI/PROFIBUS DPmaster/slave interface,Ethernet/PROFINET interface with2-port switch;MMC requiredCPU 317-2 PN/DP6ES7 317-2EK14-0AB0Main memory 1 MB,power supply 24 V DC,combined MPI/PROFIBUS DPmaster/slave interface,Ethernet/PROFINET interface with2-port switch;MMC requiredAccessoriesSIMATIC Micro Memory Card64 KB 6ES7 953-8LF20-0AA0128 KB 6ES7 953-8LG11-0AA0512 KB 6ES7 953-8LJ20-0AA02 MB 6ES7 953-8LL20-0AA04 MB 6ES7 953-8LM20-0AA08 MB 6ES7 953-8LP20-0AA0MPI cable6ES7 901-0BF00-0AA0for connecting SIMATIC S7 andthe PG through MPI; 5 m in lengthSlot number plates6ES7 912-0AA00-0AA0S7-300 manualDesign, CPU data, module data,instruction listGerman6ES7 398-8FA10-8AA0English6ES7 398-8FA10-8BA0French6ES7 398-8FA10-8CA0Spanish6ES7 398-8FA10-8DA0Italian6ES7 398-8FA10-8EA0SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD,multilingual: S7-200, S7-300, C7,S7-400, SIMATIC DP (DistributedI/O), SIMATIC PC, SIMATIC PG(Programming device), STEP 7,Engineering Tools, RuntimeSoftware, SIMATIC PCS 7,SIMATIC HMI (Human MachineInterface), SIMATIC NET (IndustrialCommunication), SIMATICMachine Vision, SIMATIC SensorsA: Subject to export regulations: AL: N and ECCN: EAR99SC: Subject to export regulations: AL: N and ECCN: EAR99HCurrent "Manual Collection" DVDand the three subsequentupdatesPower supply connector6ES7 391-1AA00-0AA010 units, spare partManual "Communication forSIMATIC S7-300/-400"German6ES7 398-8EA00-8AA0English6ES7 398-8EA00-8BA0French6ES7 398-8EA00-8CA0Spanish6ES7 398-8EA00-8DA0Italian6ES7 398-8EA00-8EA0SIMATIC S7 demo case6ES7 910-3AA00-0XA0with mounting components formounting S7-200 and S7-300PC adapter USB6ES7 972-0CB20-0XA0for connecting a PC to SIMATICS7-200/300/400 via USB;with USB cable (5 m)PROFIBUS bus componentsPROFIBUS DP bus connectorRS 485• with 90° cable outlet,max. transmission rate 12 Mbit/s- without PG interface 6ES7 972-0BA12-0XA0- with PG interface 6ES7 972-0BB12-0XA0• with 90° cable outlet for Fast-Connect connection system,max. transmission rate 12 Mbit/s- without PG interface, 1 unit 6ES7 972-0BA52-0XA0- without PG interface, 100 units 6ES7 972-0BA52-0XB0- with PG interface, 1 unit 6ES7 972-0BB52-0XA0- with PG interface, 100 units 6ES7 972-0BB52-0XB0• with axial cable outlet for6GK1 500-0EA02SIMATIC OP, for connecting toPPI, MPI, PROFIBUSPROFIBUS Fast Connect bus 6XV1 830-0EH10cableStandard type with special designfor quick mounting, 2-core,shielded, sold by the meter,max. delivery unit 1000 m,minimum ordering quantity 20 mRS 485 repeater for PROFIBUS 6ES7 972-0AA01-0XA0Data transfer rate up to 12 Mbit/s;24 V DC; IP20 housingD: Subject to export regulations: AL: N and ECCN: 5D9925Siemens ST 70 N · 20105/15

SIMATIC S7-300Central processing units© Siemens AG 2010Standard CPUs5■ Ordering data Order No. Order No.PROFINET bus componentsIE FC TP standard cable GP 2x26XV1 840-2AH104-core, shielded TP installationcable for connection to IEFC Outlet RJ45/ IE FC RJ45 Plug;PROFINET-compatible;with UL approval;Sold by the meterFO Standard Cable GP (50/125) 6XV1 873-2AStandard cable, splittable,UL approval, sold by the meterSCALANCE X204-26GK5 204-2BB10-2AA3Industrial Ethernet SwitchIndustrial Ethernet Switches withintegral SNMP access, web diagnostics,copper cable diagnosticsand PROFINET diagnostics forconfiguring line, star and ringtopologies; four 10/100 Mbit/sRJ45 ports and two FO portsCompact Switch Module6GK7 377-1AA00-0AA0CSM 377Unmanaged switch for connectinga SIMATIC S7-300, ET 200Mand up to three other participantsto Industrial Ethernet with10/100 Mbit/s;4 x RJ45 ports; external 24 V DCpower supply, LED diagnostics,S7-300 module incl. electronicmanual on CD-ROMIE FC RJ45 plugsRJ45 plug connector for IndustrialEthernet with a rugged metalenclosure and integrated insulationdisplacement contacts forconnecting Industrial Ethernet FCinstallation cablesIE FC RJ45 plug 145145° cable outlet1 unit 6GK1 901-1BB30-0AA010 units 6GK1 901-1BB30-0AB050 units 6GK1 901-1BB30-0AE0IE FC RJ45 plug 180180° cable outlet1 unit 6GK1 901-1BB10-2AA010 units 6GK1 901-1BB10-2AB050 units 6GK1 901-1BB10-2AE0PROFIBUS/PROFINETsee catalogs IK PI, CA 01bus componentsfor establishingMPI/PROFIBUS/PROFINETcommunication5/16 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Overview CPU 315F-2 DP■ Overview CPU 315F-2 PN/DP5• Based on the SIMATIC CPU 315-2 DP• For setting up a fail-safe automation system in plants withincreased safety requirements• Complies with safety requirements up to SIL 3 according toIEC 61508 and up to Cat. 4 according to EN 954-1• Distributed fail-safe I/O modules can be connected throughthe integral PROFIBUS DP interface (PROFIsafe)• Fail-safe I/O modules of the ET 200M range can also becentrally connected• Central and distributed use of standard modules for nonsafety-oriented applicationsSIMATIC Micro Memory Card required for operation of CPU.• Based on CPU 315-2 PN/DP• The CPU with medium-sized program memory and quantitystructures for setting up a fail-safe automation system in plantswith increased safety requirements• Complies with safety requirements up to SIL 3 according toIEC 61508, PL e according to ISO 13849, and up to Cat. 4according to EN 954-1• Fail-safe I/O modules in distributed stations can be connectedthrough the integrated PROFINET interface (PROFIsafe)and/or through the integrated PROFIBUS DP interface(PROFIsafe);• Fail-safe I/O modules of the ET 200M range can also becentrally connected• Central and distributed use of standard modules for nonsafety-relevant applications• Component Based Automation (CBA) on PROFINET• PROFINET IO Controller for operating distributed I/O onPROFINET• PROFINET interface with 2-port switch• PROFINET proxy for intelligent devices on PROFIBUS DP inComponent Based Automation (CBA)SIMATIC Micro Memory Card required for operation of CPU.Siemens ST 70 N · 20105/17

SIMATIC S7-300Central processing units© Siemens AG 20105Fail-safe CPUs■ Overview CPU 317F-2 PN/DP• Based on CPU 317-2 PN/DP• The fail-safe CPU with a large program memory and quantityframework for demanding applications; for setting up afail-safe automation system in plants with increased safetyrequirements.• Complies with safety requirements up to SIL 3 according toIEC 61508, PL e according to ISO 13849-1, and up to Cat. 4according to EN 954-1• Fail-safe I/O modules in distributed stations can be connectedthrough the integrated PROFINET interface (PROFIsafe)and/or through the integrated PROFIBUS DP interface(PROFIsafe)• Fail-safe I/O modules of the ET 200M range can also becentrally connected• Central and distributed use of standard modules for nonsafety-relevant applications• Component Based Automation (CBA) on PROFINET• PROFINET IO Controller for operating distributed I/O onPROFINET• PROFINET interface with 2-port switch• PROFINET proxy for intelligent devices on PROFIBUS DP inComponent Based Automation (CBA)SIMATIC Micro Memory Card required for operation of CPU.■ Technical specifications6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPProduct versionassociated programming package STEP 7 > V 5.4 + SP5 or STEP 7as of V5.2 + SP1 with HSP 177,S7 Distributed Safety as of V5.4Supply voltagesRated value• 24 V DC Yes Yes Yes• permissible range, lower limit (DC) 20.4 V 20.4 V 20.4 V• permissible range, upper limit (DC) 28.8 V 28.8 V 28.8 Vexternal protection for supply cables Min. 2 A Min. 2 A Min. 2 A(recommendation)Current consumptionCurrent consumption (rated value) 850 mA 750 mA 750 mACurrent consumption (in no-load operation), 150 mA 150 mA 150 mAtyp.Inrush current, typ. 3.5 A 4A 4AI²t 1A²⋅s 1A²⋅s 1A²⋅sfrom supply voltage L+, max.900 mAPower lossPower loss, typ.4.5 WMemoryWork memory• integrated 384 Kibyte 512 Kibyte 1.5 Mbyte• expandable No No No• Size of retentive memory for retentive data 128 Kibyte 128 Kibyte 256 KibyteblocksLoad memory• pluggable (MMC) Yes Yes Yes• pluggable (MMC), max. 8Mbyte 8Mbyte 8Mbyte5/18 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPBackup• presentYes; guaranteed by MMC(maintenance-free)Yes; guaranteed by MMC(maintenance-free)Yes; guaranteed by MMC(maintenance-free)• without battery Yes; Program and data Yes; Program and data Yes; Program and dataCPU/ blocksDB• Number, max. 1 024;Number range: 1 to 160001 024;Number range: 1 to 160002048;Number range: 1 to 16000• Size, max. 64 Kibyte 64 Kibyte 64 KibyteFB• Number, max. 1 024; Number range: 0 to 7999 1 024; Number range: 0 to 7999 2 048; Number range: 0 to 7999• Size, max. 64 Kibyte 64 Kibyte 64 KibyteFC• Number, max. 1 024; Number range: 0 to 7999 1 024; Number range: 0 to 7999 2 048; Number range: 0 to 7999• Size, max. 64 Kibyte 64 Kibyte 64 KibyteOB• Size, max. 64 Kibyte 64 Kibyte 64 KibyteNesting depth• per priority class 16 16 16• additional within an error OB 4 4 4CPU/ processing timesfor bit operations, min. 0.05 µs 0.05 µsfor word operations, min. 0.09 µs 0.09 µs 0.03 µsfor fixed point arithmetic, min. 0.12 µs 0.12 µs 0.04 µsfor floating point arithmetic, min. 0.45 µs 0.45 µs 0.16 µsTimes/counters and their retentivityS7 counter• Number 256 256 512• Retentivity- can be set Yes Yes Yes- lower limit 0 0 0- upper limit 255 255 511• Counting range- can be set Yes Yes Yes- lower limit 0 0 0- upper limit 999 999 999IEC counter• present Yes Yes Yes• Type SFB SFB SFBS7 times• Number 256 256 512• Retentivity- can be set Yes Yes Yes- lower limit 0 0 0- upper limit 255 255 511- preset no retentivity no retentivity no retentivity• Time range- lower limit 10 ms 10 ms 10 ms- upper limit 9 990 s 9 990 s 9990s5Siemens ST 70 N · 20105/19

SIMATIC S7-300Central processing units© Siemens AG 2010Fail-safe CPUs5■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPIEC timer• present Yes Yes Yes• Type SFB SFB SFBData areas and their retentivityFlag• Number, max. 2 048 byte 2 048 byte 4096byte• Retentivity available Yes; MB 0 to MB 2047 Yes; MB 0 to MB 2047 Yes; MB 0 to MB 4095• Number of clock memories 8; 1 memory byte 8; 1 memory byte 8; 1 memory byteData blocks• Number, max. 1 024;Number range: 1 to 160001 024;Number range: 1 to 160002048;Number range: 1 to 16000• Size, max. 64 Kibyte 64 Kibyte 64 Kibyte• Retentivity adjustableYes; via non-retain property onDBYes; via non-retain property onDBYes; via non-retain property onDB• Retentivity preset yes yes yesLocal data• per priority class, max. 32 Kibyte; Max. 2 KB per block 32 Kibyte; Max. 2 KB per block 32 Kibyte; Max. 2 KB per blockAddress areaI/O address area• overall 2 048 byte 2 048 byte 8192byte•Outputs 2 048 byte 2 048 byte 8192byte• of which, distributed- Inputs 2 048 byte 2 048 byte 8192byte-Outputs 2 048 byte 2 048 byte 8192byteProcess image• Inputs 2 048 byte 2 048 byte 8192byte•Outputs 2 048 byte 2 048 byte 8192byte• Inputs, adjustable 2 048 byte 2 048 byte 8192byte• Outputs, adjustable 2 048 byte 2 048 byte 8192byte• Inputs, default 384 byte 384 byte 1024byte• Outputs, default 384 byte 384 byte 1024byteSubprocess images• Number of subprocess images, max. 1 1 1Digital channels• Inputs 16 384 16 384 65 536•Outputs 16 384 16 384 65 536• Inputs, of which central 1 024 1 024 1024• Outputs, of which central 1 024 1 024 1024Analog channels• Inputs 1 024 1 024 4096•Outputs 1 024 1 024 4096• Inputs, of which central 256 256 256• Outputs, of which central 256 256 256Hardware configurationCentral devices, max. 1 1 1Expansion devices, max. 3 3 3Racks, max. 4 4 4Modules per rack, max. 8 8 85/20 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPNumber of DP masters• integrated 1 1 1• via CP 4 4 4Number of operable FMs and CPs(recommended)•FM 8 8 8• CP, point-to-point 8 8 8• CP, LAN 10 10 10Time of dayClock• Hardware clock (real-time clock) Yes Yes Yes• battery-backed and synchronizable Yes Yes Yes• Behavior of the clock following expiry ofbackup periodThe clock continues at the timeof day it had when power wasswitched offThe clock continues at the timeof day it had when power wasswitched offThe clock continues at the timeof day it had when power wasswitched off• Deviation per day, max. 10 s; Typ.: 2 s 10 s; Typ.: 2 s 10 s; Typ.: 2 sRuntime meter• Number 1 1 4• Number/Number range 0 0 0 to 3• Range of values0 to 2^31 hours(when using SFC 101)0 to 2^31 hours(when using SFC 101)0 to 2^31 hours(when using SFC 101)• Granularity 1 hour 1 hour 1 hour• retentiveYes; Must be restarted at eachrestartYes; Must be restarted at eachrestartYes; Must be restarted at eachrestartClock synchronization• supported Yes Yes Yes• to MPI, master Yes Yes Yes• to MPI, slave Yes Yes Yes• to DP, masterYes; on DP slave only time-ofdayslaveYes; on DP slave only time-ofdayslaveYes; on DP slave only time-ofdayslave• to DP, slave Yes Yes Yes• in AS, master Yes Yes Yes• in AS, slave Yes Yes• on Ethernet via NTP Yes; as client Yes; as clientS7 message functionsNumber of login stations for messagefunctions, max.16; Depending on the connectionsconfigured for PG/OP andS7 basic communication16; Depending on the connectionsconfigured for PG/OP andS7 basic communication32; Depending on the connectionsconfigured for PG/OP andS7 basic communicationProcess diagnostic messages Yes Yes Yessimultaneously active Alarm-S blocks, max. 300 300 300Test commissioning functionsStatus/control• Status/control variable Yes Yes Yes•VariablesInputs, outputs, memory bits,DB, times, countersInputs, outputs, memory bits,DB, times, countersInputs, outputs, memory bits,DB, times, counters• Number of variables, max. 30 30 30• of which status variables, max. 30 30 30• of which control variables, max. 14 14 14Forcing• Forcing Yes Yes Yes• Force, variables Inputs, outputs Inputs, outputs Inputs, outputs• Number of variables, max. 10 10 105Siemens ST 70 N · 20105/21

SIMATIC S7-300Central processing units© Siemens AG 2010Fail-safe CPUs5■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPStatus block Yes; Up to 2 simultaneously Yes; Up to 2 simultaneously Yes; Up to 2 simultaneouslySingle step Yes Yes YesNumber of breakpoints 4 4 4Diagnostic buffer• present Yes Yes Yes• Number of entries, max. 500 500 500- can be set No No No- Of which powerfail-proof 100; Only the last 100 entries areretained100; Only the last 100 entries areretained100; Only the last 100 entries areretained• Maximum number of entries that can be readin RUN- adjustable Yes; from 10 to 499 Yes; from 10 to 499 Yes; from 10 to 499- default 10 10 10Service data• can be read out Yes YesMonitoring functionsStatus LEDs Yes Yes YesCommunication functionsPG/OP communication Yes Yes YesData record routing Yes Yes YesRouting Yes; Max. 4 Yes YesGlobal data communication• supported Yes Yes Yes• Size of GD packets, max. 22 byte 22 byte 22 byteS7 basic communication• supported Yes Yes YesS7 communication• supported Yes Yes YesS5-compatible communication• supported Yes; via CP and loadable FC Yes; via CP and loadable FC Yes; via CP and loadable FCWeb server• Web server Yes; Read-only function Yes; Read-only function• Number of HTTP clients 5 5Open IE communication• TCP/IPYes; via integrated PROFINETinterface and loadable FBsYes; via integrated PROFINETinterface and loadable FBs- Number of connections, max. 8 16• ISO-on-TCP (RFC1006)Yes; via integrated PROFINETinterface and loadable FBsYes; via integrated PROFINETinterface and loadable FBs- Number of connections, max. 8 16- Data length, max. 32 768 byte 32 768 byte•UDPYes; via integrated PROFINETinterface and loadable FBsYes; via integrated PROFINETinterface and loadable FBs- Number of connections, max. 8 16- Data length, max. 1 472 byte 1472byteNumber of connections• overall 16 16 32• usable for PG communication 15 15 31• usable for OP communication 15 15 31• usable for S7 basic communication 12 14 30• usable for S7 communication 14 16- reserved for S7 communication 0 0- Adjustable for S7 communication, min. 0 0- Adjustable for S7 communication, max. 14 165/22 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPNumber of connections• Max. total number of instances 32 32• usable for routing X1 as MPI: max. 10;X1 as DP master: max. 24;X1 as DP slave (active): max. 14;X2 as PROFINET: max. 24X1 as MPI: max. 10;X1 as DP master: max. 24;X1 as DP slave (active): max. 14;X2 as PROFINET: max. 24PROFINET CBA (at set setpoint communicationload)• Setpoint for the CPU communication load 50 % 50 %• Number of remote interconnection partners 32 32• Number of functions, master/slave 30 30• Total of all Master/Slave connections 1 000 1000• Data length of all incoming connections4 000 byte 4000bytemaster/slave, max.• Data length of all outgoing connections4 000 byte 4000bytemaster/slave, max.• Number of device-internal and PROFIBUS500 500interconnections• Data length of device-internal and4 000 byte 4000bytePROFIBUS interconnections, max.• Data length per connection, max. 1 400 byte 1400byte• Remote interconnections with acyclictransmission- Sampling frequency: Sampling time, min. 500 ms 500 ms- Number of incoming interconnections 100 100- Number of outgoing interconnections 100 100- Data length of all incoming interconnections,2 000 byte 2000bytemax.- Data length of all outgoing interconnections,2 000 byte 2000bytemax.- Data length per connection, max. 1 400 byte 1400byte• Remote interconnections with cyclictransmission- Transmission frequency:10 ms 10 msTransmission interval, min.- Number of incoming interconnections 200 200- Number of outgoing interconnections 200 200- Data length of all incoming interconnections,2 000 byte 2000bytemax.- Data length of all outgoing interconnections,2 000 byte 2000bytemax.- Data length per connection, max. 450 byte 450 byte• HMI variables via PROFINET (acyclic)- Number of stations that can log on for HMI3; 2x PN OPC/1x iMap 3; 2x PN OPC/1x iMapvariables (PN OPC/iMap)- HMI variable updating 500 ms 500 ms- Number of HMI variables 200 200- Data length of all HMI variables, max. 2 000 byte 2000byte• PROFIBUS proxy functionality- supported Yes Yes- Number of linked PROFIBUS devices 16 16- Data length per connection, max. 240 byte; Slave-dependent 240 byte; Slave-dependent1st interfaceType of interface Integrated RS 485 interface Integrated RS 485 interface Integrated RS 485 interfacePhysics RS 485 RS 485 RS 485Isolated No Yes YesPower supply to interface (15 to 30 V DC),max.200 mA 200 mA 200 mA5Siemens ST 70 N · 20105/23

SIMATIC S7-300Central processing units© Siemens AG 2010Fail-safe CPUs5■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPFunctionality•MPI Yes Yes Yes•DP master No Yes Yes• DP slave No Yes Yes• Point-to-point connection No No NoMPI• Number of connections 16 16 32• Services- PG/OP communication Yes Yes Yes- Routing Yes Yes Yes- Global data communication Yes Yes Yes- S7 basic communication Yes Yes Yes- S7 communication Yes Yes Yes- S7 communication, as client No No; but via CP and loadable FB No; but via CP and loadable FB- S7 communication, as server Yes Yes Yes• Transmission speeds, max. 187.5 kbit/s 12 Mbit/s 12 Mbit/sDP master• Services- PG/OP communication Yes Yes- Routing Yes Yes- Global data communication No No- S7 basic communication Yes; I blocks only Yes; I blocks only- S7 communication Yes Yes- S7 communication, as client No No- S7 communication, as server Yes Yes- Equidistance mode support Yes Yes- Isochronous mode Yes; OB 61 Yes; OB 61- SYNC/FREEZE Yes Yes- Activation/deactivation of DP slaves Yes Yes- Number of DP slaves that can be simultaneously8 8activated/deactivated, max.-DPV1 Yes Yes• Transmission speeds, max. 12 Mbit/s 12 Mbit/s• Number of DP slaves, max. 124 124• Address area- Inputs, max. 2 Kibyte 8 Kibyte-Outputs, max. 2 Kibyte 8 Kibyte• User data per DP slave- Inputs, max. 244 byte 244 byte-Outputs, max. 244 byte 244 byteDP slave• Services- PG/OP communication Yes Yes- Routing Yes; Only with active interface Yes; Only with active interface- Global data communication No No- S7 basic communication No No- S7 communication Yes Yes- S7 communication, as client No No- S7 communication, as server Yes; Connection configured onone side onlyYes; Connection configured onone side only- Direct data exchange (slave-to-slaveYesYescommunication)-DPV1 No No• Transmission rate, max. 12 Mbit/s 12 Mbit/s• Transfer memory- Inputs 244 byte 244 byte-Outputs 244 byte 244 byte• Address area, max. 32 32• User data per address area, max. 32 byte 32 byte5/24 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DP2nd interfaceType of interface integrated RS 485 interface PROFINET PROFINETPhysics RS 485 Ethernet RJ45 Ethernet RJ45Isolated Yes Yes YesIntegrated switch Yes YesNumber of ports 2 2Power supply to interface (15 to 30 V DC), 200 mAmax.automatic detection of transmission speed Yes; 10/100 Mbit/s Yes; 10/100 Mbit/sAutonegotiation Yes YesAutocrossing Yes YesFunctionality•MPI No No No•DP master Yes No No• DP slave Yes No No• PROFINET IO Controller Yes Yes• PROFINET CBA Yes Yes• Web server Yes; only read function Yes; only read function- Number of HTTP clients 5 5• Point-to-point connection No No NoDP master• Number of connections, max. 16• Services- PG/OP communication Yes- Routing Yes- Global data communication No- S7 basic communication Yes; I blocks only- S7 communication Yes- S7 communication, as client No- S7 communication, as server Yes- Equidistance mode support Yes- Isochronous mode Yes; OB 61- SYNC/FREEZE Yes- Activation/deactivation of DP slaves Yes- Number of DP slaves that can be simultaneously8activated/deactivated, max.-DPV1Yes• Transmission speeds, max.12 Mbit/s• Number of DP slaves, max.124; Per station• Address area- Inputs, max. 2 048 byte-Outputs, max.2 048 byte• User data per DP slave- Inputs, max. 244 byte-Outputs, max.244 byteDP slave• Number of connections 16• Services- PG/OP communication Yes- Routing Yes; Only with active interface- Global data communication No- S7 basic communication No5Siemens ST 70 N · 20105/25

SIMATIC S7-300Central processing units© Siemens AG 2010Fail-safe CPUs5■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPDP slave• Services- S7 communication, as client No- S7 communication, as server Yes- Direct data exchange (slave-to-slave Yescommunication)-DPV1No• GSD fileThe current GSD file can beobtained from: http://www.siemens.com/profibus-gsd• Transmission rate, max.12 Mbit/s• automatic baud rate searchYes; only with passive interface• Transfer memory- Inputs 244 byte-Outputs244 byte• Address area, max. 32• User data per address area, max.32 bytePROFINET IO Controller• Services- PG/OP communication Yes Yes- Routing Yes Yes- S7 communication Yes; with loadable FBs, max.configurable connections: 14,max. number of instances: 32Yes; with loadable FBs, max.configurable connections: 16,max. number of instances: 32- Isochronous mode No No- Open IE communication Yes; via TCP/IP, ISO on TCP andUDPYes; via TCP/IP, ISO on TCP andUDP• Transmission rate, max. 100 Mbit/s 100 Mbit/s• Total number of connectable IO Devices,128 128max.• Max. number of connectable IO devices for128 128RT- of which in line, max. 128 128• Number of IO Devices with IRT and the128 128option "high flexibility"- of which in line, max. 61 61• IRT, supported Yes Yes• Prioritized startup supported Yes Yes- Number of IO Devices, max. 32 32• Activation/deactivation of IO Devices Yes Yes- Number of IO Devices that can be simultaneously8 8activated/deactivated, max.• IO Devices changing during operationYesYes(partner ports), supported- Max. number of IO devices per tool 8 8• Device replacement without swap medium Yes Yes• Updating time250 µs - 128 ms(with send cycle of 250 µs);500 µs - 256 ms(with send cycle of 500 µs);1 ms - 512 ms(with send cycle 1 ms);minimum value of the send cycleis also dependent on the setcommunication share forPROFINET IO, on the number ofIO Devices250 µs - 128 ms(with send cycle of 250 µs);500 µs - 256 ms(with send cycle of 500 µs);1 ms - 512 ms(with send cycle 1 ms);minimum value of the send cycleis also dependent on the setcommunication share forPROFINET IO, on the number ofIO Devices5/26 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Technical specifications (continued)6ES7 315-6FF04-0AB0 6ES7 315-2FJ14-0AB0 6ES7 317-2FK14-0AB0Product-type designation CPU 315F-2 DP CPU 315F-2 PN/DP CPU 317F-2 PN/DPPROFINET IO Controller• Address area- Inputs, max. 2 Kibyte 8 Kibyte- Outputs, max. 2 Kibyte 8 Kibyte• User data per address area, max.- User data consistency, max. 254 byte 254 bytePROFINET CBA• acyclic transmission Yes Yes• cyclic transmission Yes YesOpen IE communication• Open IE communication, supported Yes Yes• Number of connections, max. 8 8• Local port numbers used at the system end 0, 20, 21, 25, 80, 102, 135, 161,8 080, 34 962, 34 963, 34 964,65 532, 65 533, 65 534, 65 535CPU/ programmingProgramming language• STEP 7Yes; V5.2 SP1 or higher withHW updateYes; V5.4 SP4 or higher withHW update0, 20, 21, 25, 80, 102, 135, 161,8 080, 34 962, 34 963, 34 964,65 532, 65 533, 65 534, 65 535Yes; V5.4 SP4 or higher withHW update•LAD Yes Yes Yes•FBD Yes Yes Yes•STL Yes Yes Yes•SCL Yes Yes Yes•CFC Yes Yes Yes• GRAPH Yes Yes Yes•HiGraph ® Yes Yes YesCommand set See instruction list See instruction list See instruction listNesting levels 8 8 8User program protection/Yes Yes Yespassword protectionSystem functions (SFC) see instruction list see instruction list see instruction listSystem function blocks (SFB) see instruction list see instruction list see instruction listEnvironmental requirementsOperating temperature•Min. 0°C 0°C• max. 60 °C 60 °CDimensions and weightDimensions•Width 40 mm 40 mm 40 mm• Height 125 mm 125 mm 125 mm•Depth 130 mm 130 mm 130 mmWeight• Weight, approx.290 g5Siemens ST 70 N · 20105/27

SIMATIC S7-300Central processing units© Siemens AG 2010Fail-safe CPUs5■ Ordering data Order No. Order No.CPU 315F-2 DP6ES7 315-6FF04-0AB0SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0CPU for SIMATIC S7-300F;main memory 384 KB,power supply 24 V DC,MPI/PROFIBUS DP master/slaveinterface,incl. slot number platesCPU 315F-2 PN/DP6ES7 315-2FJ14-0AB0CPU for SIMATIC S7-300F;main memory 512 KB,power supply 24 V DC,MPI/PROFIBUS DP master/slaveinterface; Industrial Ethernet/PROFINETinterface;incl. slot number labelsCPU 317F-2 PN/DP6ES7 317-2FK14-0AB0Main memory 1.5 MB,power supply 24 V DC,MPI/PROFIBUS DP master/slaveinterface; Industrial Ethernet/PROFINETinterface;MMC requiredAccessoriesDistributed Safety V5.4programming toolTask: Software for configuringfail-safe user programs forSIMATIC S7-300F, S7-400F,ET 200SRequirement: STEP 7 V5.3 SP3and higherFloating license6ES7 833-1FC02-0YA5Software Update Service6ES7 833-1FC00-0YX2Distributed Safety UpgradeFrom V5.x to V5.4;6ES7 833-1FC02-0YE5Floating license for 1 userSIMATIC Micro Memory Card64 KB 6ES7 953-8LF20-0AA0128 KB 6ES7 953-8LG11-0AA0512 KB 6ES7 953-8LJ20-0AA02 MB 6ES7 953-8LL20-0AA04 MB 6ES7 953-8LM20-0AA08 MB 6ES7 953-8LP20-0AA0MPI cable6ES7 901-0BF00-0AA0For connecting SIMATIC S7 andthe PG through MPI; 5 m in lengthSlot number plates6ES7 912-0AA00-0AA0S7-300 manualDesign, CPU data, module data,instruction listGerman6ES7 398-8FA10-8AA0English6ES7 398-8FA10-8BA0French6ES7 398-8FA10-8CA0Spanish6ES7 398-8FA10-8DA0Italian6ES7 398-8FA10-8EA0A: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D992Electronic manuals on DVD,multilingual: S7-200, S7-300, C7,S7-400, SIMATIC DP (DistributedI/O), SIMATIC PC, SIMATIC PG(Programming device), STEP 7,Engineering Tools, Runtime Software,SIMATIC PCS 7, SIMATICHMI (Human Machine Interface),SIMATIC NET (Industrial Communication),SIMATIC MachineVision, SIMATIC SensorsSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdatesPower supply connector6ES7 391-1AA00-0AA010 units, spare partManual "Communication forSIMATIC S7-300/-400"German6ES7 398-8EA00-8AA0English6ES7 398-8EA00-8BA0French6ES7 398-8EA00-8CA0Spanish6ES7 398-8EA00-8DA0Italian6ES7 398-8EA00-8EA0PC adapter USB6ES7 972-0CB20-0XA0for connecting a PC to SIMATICS7-200/300/400 via USB;with USB cable (5 m)PROFIBUS bus componentsPROFIBUS DP bus connectorRS 485• with 90° cable outlet, max.transmission rate 12 Mbit/s- without PG interface 6ES7 972-0BA12-0XA0- with PG interface 6ES7 972-0BB12-0XA0• with 90° cable outlet for Fast-Connect connection system,max. transmission rate 12 Mbit/s- without PG interface, 1 unit 6ES7 972-0BA52-0XA0- without PG interface, 100 units 6ES7 972-0BA52-0XB0- with PG interface, 1 unit 6ES7 972-0BB52-0XA0- with PG interface, 100 units 6ES7 972-0BB52-0XB0• with axial cable outlet for6GK1 500-0EA02SIMATIC OP, for connecting toPPI, MPI, PROFIBUSPROFIBUS Fast Connect6XV1 830-0EH10bus cableStandard type with special designfor quick mounting,2-core, shielded,sold by the meter,max. delivery unit 1000 m,minimum ordering quantity 20 mRS 485 repeater for PROFIBUS 6ES7 972-0AA01-0XA0Data transfer rate up to 12 Mbit/s;24 V DC; IP20 housing5/28 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Central processing unitsFail-safe CPUs■ Ordering data Order No. Order No.PROFINET bus componentsIE FC TP standard cable GP 2x26XV1 840-2AH104-core, shielded TP installationcable for connection to IEFC Outlet RJ45/ IE FC RJ45 Plug;PROFINET-compatible;with UL approval;Sold by the meterFO Standard Cable GP (50/125) 6XV1 873-2AStandard cable, splittable,UL approval, sold by the meterSCALANCE X204-26GK5 204-2BB10-2AA3Industrial Ethernet SwitchIndustrial Ethernet Switches withintegral SNMP access, Web diagnostics,copper cable diagnosticsand PROFINET diagnostics forconfiguring line, star and ringtopologies; four 10/100 Mbit/sRJ45 ports and two FO portsCompact Switch Module6GK7 377-1AA00-0AA0CSM 377Unmanaged switch for connectinga SIMATIC S7-300, ET 200Mand up to three other participantsto Industrial Ethernet with10/100 Mbit/s;4 x RJ45 ports; external 24 V DCpower supply, LED diagnostics,S7-300 module incl. electronicmanual on CD-ROMIE FC RJ45 plugsRJ45 plug connector for IndustrialEthernet with a rugged metalhousing and integrated insulationdisplacement contacts for connectingIndustrial Ethernet FCinstallation cablesIE FC RJ45 plug 145145° cable outlet1 unit 6GK1 901-1BB30-0AA010 units 6GK1 901-1BB30-0AB050 units 6GK1 901-1BB30-0AE0IE FC RJ45 plug 180180° cable outlet1 unit 6GK1 901-1BB10-2AA010 units 6GK1 901-1BB10-2AB050 units 6GK1 901-1BB10-2AE0PROFIBUS/PROFINETsee catalogs IK PI, CA 01bus componentsfor establishingMPI/PROFIBUS/PROFINETcommunication5Siemens ST 70 N · 20105/29

SIMATIC S7-300SIPLUS digital modules© Siemens AG 20105SIPLUS SM 322 digital output module■ Overview• Digital outputs• For connecting solenoid valves, contactors, small-powermotors, lamps and motor startersFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuEnvironmental SIPLUS extremeconditionsAmbient temperature -40/-25 to +60/+70°C 1)rangeRelative humidity 100%Dewing, condensation and icing permissibleContaminantconcentration1) Depends on the product family2) 30 min/dayEN60721-3-3 3C4 and ISA S71.04 G1, G2,G3, GXConstant load Limit value 2)SO 2 4.8 ppm 17.8 ppmH 2 S 9.9 ppm 49.7 ppmCl 0.2 ppm 1.0 ppmHCl 0.66 ppm 3.3 ppmHF 0.12 ppm 2.4 ppmNH 49 ppm 247 ppmO 3 0.1 ppm 1.0 ppmNO x 5.2 ppm 10.4 ppmAt RH < 75%, condensation permittedSaline fog Saline fog test (EN 60068-2-52)Mechanically active EN60721-3-3 3S4substances• Dust4.0 mg/m 2 h(suspendedsubstance content)• Dust (precipitation) 40 mg/m 2 h incl. conductive sand/dust("Arizona dust")Biologically activesubstancesEN60721-3-3 3B2Mildew growth,Fungus, excluding faunaSIPLUS SM 322Order No.Order No. based onAmbient temperature rangeAmbient conditionsConforms with standard forelectronic equipment usedon rolling stock (EN 50155,temperature T1, category 1).Technical data■ Ordering data8 DO, 48 ... 125 V DC6AG1 322-1CF00-7AA06ES7 322-1CF00-0AA0-25 ... +70 °C, condensation permissibleResistant in accordance with EN60721 tochemically (-3C4), mechanically (-3S4)and biologically (-3B2) active substancesand compliant with ISA S71.04G1, G2, G3, GX.For further information, refer to Environmentalconditions of SIPLUS extreme(on this page) or go towww.siemens.com/siplus-extremeYesThe technical data of the standardproduct apply with the exception of theenvironmental conditions.Order No.SIPLUS SM 322digital output module(extended temperature range andmedial exposure)incl. labeling strips,bus connector8 outputs, 48 … 125 V DC, 1.5 A C 6AG1 322-1CF00-7AA0Accessories see catalog ST 70 · 2009,S7-300 digital output modules,page 4/82C: Subject to export regulations: AL: N and ECCN: EAR99H5/30 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Analog modules■ Overview• Analog inputs• For connection of voltage and current sensors, thermocouples,resistors and resistance thermometers■ Technical specifications6ES7 331-1KF02-0AB06ES7 331-7PE10-0AB0Current consumptionfrom backplane bus 5 V DC, 90 mA 100 mAmax.Power lossPower loss, typ. 0.4 W 2.2 WConnection methodrequired front connector 40-pin 1x 40-pinIsochronous modeIsochronous mode No NoAnalog inputsNumber of analog inputs 8 6Number of analog inputs for 8resistance measurementCable length, shielded, max. 200 m; max. 50 m 200 mat 50 mVInput ranges (rated values),voltages• 0 to +10 VYes• 1 to 5 VYes• 1 to 10 VNo• -1 V to +1 V Yes Yes• -10 V to +10 VYes• -2.5 V to +2.5 VNo• -250 mV to +250 mV No Yes• -5 V to +5 VYes• -50 mV to +50 mV Yes Yes• -500 mV to +500 mV Yes Yes• -80 mV to +80 mV No YesInput ranges (rated values),currents• 0 to 20 mAYes• -10 to +10 mANo• -20 to +20 mAYesSM 331 analog input module6ES7 331-1KF02-0AB0Input ranges (rated values),currents• -3.2 to +3.2 mANo• 4 to 20 mAYesInput ranges (rated values),thermoelements• Type B No Yes• Type E No Yes• Type J No Yes• Type K No Yes• Type L No Yes• Type N No Yes• Type R No Yes• Type S No Yes• Type T No Yes• Type U No Yes• Type TXK/TXK(L) to GOST No Yes• Input resistance (Type10 MΩTXK/TXK(L) to GOST)Input ranges (rated values),resistance thermometers• Cu 10No• Ni 100Yes;Standard/climate• Ni 1000Yes• LG-Ni 1000Yes;Standard /climate• Ni 120No• Ni 200No• Ni 500No• Pt 100Yes;Standard /climate• Pt 1000No• Pt 200No• Pt 500NoInput ranges (rated values),resistors• 0 to 150 ohmsNo• 0 to 300 ohmsNo• 0 to 600 ohmsYes• 0 to 6000 ohmsYesVoltage input• permissible input voltagefor voltage input (destructionlimit), max.30 V;12 V continuous,30 V for max. 1 sCurrent input• permissible input current 40 mAfor current input (destructionlimit), max.Characteristic linearization• parameterizable Yes Yes6ES7 331-7PE10-0AB035 V;35 V continuous,75 V for max. 1 s(mark to space ratio1:20)5Siemens ST 70 N · 20105/31

SIMATIC S7-300Analog modules© Siemens AG 20105SM 331 analog input module■ Technical specifications (continued)6ES7 331-1KF02-0AB06ES7 331-7PE10-0AB0Characteristic linearization• for current measurement- for thermocouples Type B, E, J, K, L,N, R, S. T, U, C,TXK, XK(L)- for resistance thermometeryes;Pt100standard/air con.;Ni100standard/air con.;Ni1000standard/air con.;LG-Ni1000standard/air con.Temperature compensation• Temperature compensationYesparameterizable• internal temperatureYescompensation• external temperatureYescompensation withcompensations socket• external temperatureYescompensation with Pt100Analog value creationMeasurement principle integrating integratingIntegrations and conversiontime/ resolution per channel• Resolution with overrange(bit including sign), max.• Integration time,parameterizable13 bit 16 bit;Two’s complementYes; 60 / 50 ms Yes• Basic conversion time, ms 66 / 55 ms 30 / 50 / 60 / 300• Integration time, ms 10 / 16,67 / 20 / 100• Basic conversion time, including66 / 55 msintegration time, ms• Interference voltage suppression50 / 60 Hzfor interferencefrequency f1 in HzEncoderConnection of signalencoders• for current measurement as2-wire transducer• for current measurement as4-wire transducer• for resistance measurementwith 2-conductorconnection• for resistance measurementwith 3-conductorconnection• for resistance measurementwith 4-conductorconnectionErrors/accuraciesOperational limit in overalltemperature range• Voltage, relative to inputareaYes; with externalsupplyYesYesYesYes+/- 0,6 %;+/-0.6% (+/-5 V,10 V, 1 to 5 V, 0 to10 V);+/-0.5% (+/-50 mV,500 mV, 1 V)+/- 1 %/KErrors/accuraciesOperational limit in overalltemperature range• Current, relative to inputarea• Impedance, relative toinput area• Resistance-typethermometer, relative toinput areaBasic error limit(operational limit at 25 °C)• Voltage, relative to inputarea• Current, relative to inputarea• Impedance, relative toinput area• Resistance-typethermometer, relative toinput area6ES7 331-1KF02-0AB0+/- 0,5 %;+/-20 mA,0 to 20 mA,4 to 20 mA+/- 0,5 %;0 to 6 kohms,0 to 600 kohms1 Kelvin (Pt100,Ni100, climatic;Ni1000, LG-Ni1000,standard;Ni1000, LG-Ni1000,climatic);1.2 Kelvin(Pt100, Ni100,standard)+/- 0,4 %; 0.4%(+/-5 V, 10 V, 1 to5 V, 0 to 10 V);0.3% (+/-50 mV,500 mV, 1 V)+/- 0,3 %;+/-20 mA, 0 to20 mA, 4 to 20 mA+/- 0,3 %;0 to 6 kohms,0 to 600 kohms1 Kelvin(Pt100, Ni100,standard);0.8 Kelvin(Pt100, Ni100,climatic;Ni1000, LG-Ni1000,standard;Ni1000, LG-Ni1000,climatic)6ES7 331-7PE10-0AB0Interrupts/diagnostics/status informationAlarms• Diagnostic alarm No Yes; Channel bychannel• Limit value alarm No Yes;ParameterizableDiagnoses• Diagnostic information NoYesreadableIsolationIsolation checked with 500 V DCGalvanic isolationGalvanic isolation analoginputs• between the channels No Yes• between the channels,1in groups of• between the channels andthe backplane busYesYes5/32 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Analog modulesSM 331 analog input module■ Technical specifications (continued)6ES7 331-1KF02-0AB0Dimensions and weightDimensions• Width 40 mm 40 mm• Height 125 mm 125 mm•Depth 117 mm 120 mm6ES7 331-7PE10-0AB06ES7 331-1KF02-0AB0Weight• Weight, approx. 250 g 272 g6ES7 331-7PE10-0AB0■ Ordering data Order No. Order No.SM 331 analog input modulesTerminal elementsIncluding labeling strips, bus connector,for 1 cable with 4 … 13 mm 6ES7 390-5CA00-0AA0measuring range modulesdiameter8 inputs, 13-bit resolution C 6ES7 331-1KF02-0AB0Label cover6ES7 392-2XY00-0AA06 inputs, for thermal resistors, C 6ES7 331-7PE10-0AB0resolution 16 bitsAccessoriesMeasuring range module for 6ES7 974-0AA00-0AA0analog inputs1 module for 2 analog inputs;2 units (spare part)Front connectors20-pin, with screw contacts• 1 unit6ES7 392-1AJ00-0AA0• 100 units6ES7 392-1AJ00-1AB020-pin, with spring-loadedcontacts• 1 unit6ES7 392-1BJ00-0AA0• 100 units6ES7 392-1BJ00-1AB020-pin, with FastConnect• 1 unit6ES7 392-1CJ00-0AA040-pin, with screw contacts• 1 unit6ES7 392-1AM00-0AA0• 100 units6ES7 392-1AM00-1AB040-pin with spring-loadedcontacts• 1 unit6ES7 392-1BM01-0AA0• 100 units6ES7 392-1BM01-1AB040-pin, with FastConnect• 1 unit6ES7 392-1CM00-0AA0Front door, elevated design 6ES7 328-0AA00-7AA0e.g. for 32-channel modules;for connecting 1.3 mm 2 /16 AWGwiresSIMATIC TOP connect see Catalog ST 70, page 4/218Bus connectors6ES7 390-0AA00-0AA01 unit (spare part)Shield connecting element 6ES7 390-5AA00-0AA080 mm wide, with 2 rows for4 terminal elements eachTerminal elements2 unitsfor 2 cables with 2 … 6 mm 6ES7 390-5AB00-0AA0diameterfor 1 cable with 3 … 8 mmdiameter6ES7 390-5BA00-0AA0A: Subject to export regulations: AL: N and ECCN: EAR99SC: Subject to export regulations: AL: N and ECCN: EAR99H10 units (spare part), for moduleswith 20-pin front connectorLabeling strips6ES7 392-2XX00-0AA010 units (spare part), for moduleswith 20-pin front connectorS7 SmartLabel V3.0Software for automatic labeling ofmodules based on data of theSTEP 7 projectSingle license A 2XV9 450-1SL03-0YX0Upgrade single license A 2XV9 450-1SL03-0YX4Labeling sheets for machinelabelingFor 16-channel signal modules,DIN A4, for printing with laserprinter; 10 unitspetrol6ES7 392-2AX00-0AA0light-beige6ES7 392-2BX00-0AA0yellow6ES7 392-2CX00-0AA0red6ES7 392-2DX00-0AA0For 32-channel signal modules,DIN A4, for printing with laserprinter; 10 unitspetrol6ES7 392-2AX10-0AA0light-beige6ES7 392-2BX10-0AA0yellow6ES7 392-2CX10-0AA0red6ES7 392-2DX10-0AA0SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD,multilingualSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent S7 Manual CollectionDVD and the three subsequentupdatesS7-300 manualDesign, CPU data, module data,instruction listGerman6ES7 398-8FA10-8AA0English6ES7 398-8FA10-8BA0French6ES7 398-8FA10-8CA0Spanish6ES7 398-8FA10-8DA0Italian6ES7 398-8FA10-8EA0D: Subject to export regulations: AL: N and ECCN: 5D9925Siemens ST 70 N · 20105/33

SIMATIC S7-300F digital / analog modules© Siemens AG 2010SM 326 F digital input module - Safety Integrated■ Overview• Digital inputs for the fail-safe SIMATIC S7 systems• They are suitable for connecting:- Switches and 2-wire proximity switches (BEROs)- Sensors according to NAMUR and mechanical contacts,also for signals from hazardous areas• With integral safety functions for fail-safe operation• Can be used in fail-safe mode- Centrally: With S7-31xF-2 DP- Distributed in ET 200M: With SIMATIC IM 151-7 F-CPU,S7-31xF-2 DP, S7-416F-2 and S7-400F/FH• Can be used in standard mode as an S7-300 module5■ Technical specifications6ES7 326-1BK02-0AB0Supply voltagesSupply voltage of electronics andencoders 1L+/2L+• Rated value (DC)24 VCurrent consumptionfrom load voltage L+ (without load), 450 mAmax.from backplane bus 5 V DC, max. 100 mAPower lossPower loss, typ.10 WConnection methodrequired front connector40-pinDigital inputsNumber of digital inputs 24Number of simultaneously controllableinputs• all mounting positions- Concurrently controllable inputs, 24up to 40 °C- Concurrently controllable inputs, 24; (at 24 V) or 18 (at 28.8 V)up to 60 °CInput voltage• Rated value, DC24 V• for signal "0"-30 to +5 V• for signal "1"11 to 30 VInput current• for signal "0", max. (permissible 2mAquiescent current)• for signal "1", typ.10 mAInput delay (for rated value of inputvoltage)• for standard inputs- at "0" to "1", max. 3.4 ms- at "1" to "0", max. 3.4 msCable length• Cable length, shielded, max. 200 m• Cable length unshielded, max. 100 mEncoder supplyNumber of outputsOutput current, rated valueEncoderConnectable encoders• 2-wire BEROS- permissible quiescent current(2-wire BEROS), max.Ex(i) characteristicsMax. values of input circuits (perchannel)• Ta (permissible ambienttemperature), max.Interrupts/diagnostics/statusinformationAlarms• Diagnostic alarmDiagnoses• Diagnostic information readableIsolationIsolation checked withGalvanic isolationGalvanic isolation digital inputs• between the channels6ES7 326-1BK02-0AB04; Isolated400 mAYes; if short-circuit test isdeactivated2mA60 °CYesYesYes• between the channels, in groups of 12• between the channels and the backplaneYesbusStandards, approvals, certificatesHighest safety class achievable insafety mode• to DIN VDE 0801 AK 6• acc. to EN 954 Cat. 4• acc. to IEC 61508 SIL 3500 V DC / 350 V AC5/34 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300F digital / analog modulesSM 326 F digital input module - Safety Integrated■ Technical specifications (continued)6ES7 326-1BK02-0AB0Dimensions and weightDimensions• Width80 mm• Height125 mm•Depth120 mmWeight• Weight, approx.6ES7 326-1BK02-0AB0442 g■ Ordering data Order No. Order No.F digital input module SM 326DIN rail for active bus modules24 inputs, 24 V DC 6ES7 326-1BK02-0AB0for max. 5 active bus modules forAccessorieshot swapping functionDistributed Safety V5.4• 483 mm (19") long6ES7 195-1GA00-0XA0programming tool• 530 mm long6ES7 195-1GF30-0XA0Task:• 620 mm long6ES7 195-1GG30-0XA0Software for configuring fail-safeuser programs for SIMATIC• 2000 mm long6ES7 195-1GC00-0XA0S7-300F, S7-400F, ET 200SActive bus module6ES7 195-7HC00-0XA0Requirement:STEP 7 V5.3 SP3 and higherBM 1 x 80 for 1 module with80 mm widthFloating license6ES7 833-1FC02-0YA5SITOP power supply module 6ES7 307-1EA00-0AA0Software Update Service6ES7 833-1FC00-0YX2for ET 200M; 120/230 V AC,Distributed Safety Upgrade24 V DC, 5 A; Type PS 307-1EFrom V5.x to V5.4;6ES7 833-1FC02-0YE5Front connectorsFloating license for 1 user40-pin, with screw contactsLabeling sheet with strips for10 electronic blocks• 1 unit6ES7 392-1AM00-0AA0• For 16-channel electronic 6ES7 193-1BH00-0XA0blocks incl. add-on terminals• For 32-channel electronic 6ES7 193-1BL00-0XA0blocks incl. add-on terminalsConnecting cable for6ES7 901-4BD00-0XA0PROFIBUS12 Mbit/s, for connecting PG toPROFIBUS DP, pre-assembledwith 2 x 9-pin Sub-D connector,3 mPROFIBUS bus connector• 90° cable outlet, terminating 6ES7 972-0BA12-0XA0resistor with isolating function,without PG socket, up to12 Mbit/s• 90° cable outlet, terminating 6ES7 972-0BB12-0XA0resistor with isolating function,without PG socket, up to12 Mbit/s• 90° cable outlet, FastConnectterminating resistor with isolatingfunction, without PG socket,up to 12 Mbit/s- 1 unit 6ES7 972-0BA52-0XA0- 100 units 6ES7 972-0BA52-0XB0• 90° cable outlet, FastConnectterminating resistor with isolatingfunction, with PG socket, upto 12 Mbit/s;- 1 unit 6ES7 972-0BB52-0XA0- 100 units 6ES7 972-0BB52-0XB0A: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D992• 100 units6ES7 392-1AM00-1AB040-pin with spring-loadedcontacts• 1 unit6ES7 392-1BM01-0AA0• 100 units6ES7 392-1BM01-1AB040-pin, with FastConnect• 1 unit6ES7 392-1CM00-0AA0Labeling strips6ES7 392-2XX20-0AA0For fail-safe modules (spare part);10 unitsLabel cover6ES7 392-2XY20-0AA0For fail-safe modules (spare part);10 unitsLK 393 cable guide6ES7 393-4AA10-0AA0For F modules; L+ and Mconnections; 5 unitsS7-300 manualDesign, CPU data, module data,instruction listGerman6ES7 398-8FA10-8AA0English6ES7 398-8FA10-8BA0French6ES7 398-8FA10-8CA0Spanish6ES7 398-8FA10-8DA0Italian6ES7 398-8FA10-8EA0SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD,multilingualSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent S7 Manual CollectionDVD and the three subsequentupdates5Siemens ST 70 N · 20105/35

SIMATIC S7-300F digital / analog modules© Siemens AG 2010SM 326 F digital output module - Safety Integrated■ Overview• Digital outputs for the fail-safe SIMATIC S7 systems• Two versions (1 x current sourcing, 1 x current sinking)• For connecting solenoid valves, DC contactors and indicatorlights• With integral safety functions for fail-safe operation• Can be used in fail-safe operation- Centrally: with S7-31xF DP, S7-31xF PN/DP- Distributed in ET 200M: with SIMATIC IM 151-7 F-CPU,S7-31xF-2 DP, S7-41xF-2 and S7-400F/FH5■ Technical specifications6ES7 326-2BF10-0AB06ES7 326-2BF41-0AB0Supply voltagesLoad voltage L+• Rated value (DC) 24 V; 1L+, 2L+, 3L+ 24 V; 1L+, 2L+, 3L+Current consumptionfrom load voltage1L+, max. 100 mA; fromsupply voltage75 mA; fromsupply voltagefrom load voltage 2L+ 100 mA 100 mA(without load), max.from load voltage 3L+ 100 mA 100 mA(without load), max.from backplane bus 5 V DC, 100 mA 100 mAmax.Power lossPower loss, typ. 6W 12 WConnection methodrequired front connector 40-pin 40-pinDigital outputsNumber of digital outputs 10 8Short-circuit protection Yes; Electronic Yes; ElectronicLimitation of inductiveL+ (-33 V)shutdown voltage toLamp load, max. 5W 5WOutput voltage• for signal "1" without seriesL+ (-1.0 V)diode, min.Output current• for signal "1" rated value 2A 2A• for signal "1" permissiblerange for 0 to 40 °C, min.7mA7mA• for signal "1" permissiblerange for 0 to 40 °C, max.2 A; 2 A for horizontalinstallation,1 A for verticalinstallation6ES7 326-2BF10-0AB0Output current• for signal "1" permissible 7mA7mArange for 40 to 60 °C, min.• for signal "1" permissiblerange for 40 to 60 °C, max.• for signal "0" residual 0.5 mA 0.5 mAcurrent, max.Switching frequency• with resistive load, max. 25 Hz 30 Hz• with inductive load, max. 25 Hz 2Hz• on lamp load, max. 10 Hz 10 HzAggregate current ofoutputs (per group)• horizontal installation- up to 40 °C, max. 10 A 7.5 A- up to 60 °C, max. 6A 5A• vertical installation- up to 40 °C, max. 5A 5ACable length• Cable length, shielded,max.• Cable length unshielded,max.Interrupts/diagnostics/status informationAlarms6ES7 326-2BF41-0AB01 A; for horizontalinstallation1 000 m 200 m; 200 m forSIL3, AK 6, Cat 4600 m• Diagnostic alarm Yes Yes;ParameterizableDiagnoses• Diagnostic information YesYesreadableIsolationIsolation checked with 370 V for 1 min 500 V DC /350 V AC5/36 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300F digital / analog modules■ Technical specifications (continued)6ES7 326-2BF10-0AB0Galvanic isolationGalvanic isolation digitaloutputs• between the channels Yes Yes• between the channels, 5 4in groups of• between the channels and YesYesthe backplane bus• between the channels andthe power supply of theelectronicsYesYes6ES7 326-2BF41-0AB0SM 326 F digital output module - Safety Integrated6ES7 326-2BF10-0AB0Standards, approvals,certificatesHighest safety classachievable in safety mode• to DIN VDE 0801 AK 5 and 6• acc. to EN 954 Cat. 4 Cat. 4• acc. to IEC 61508 SIL 3 SIL 3Dimensions and weightDimensions• Width 40 mm 80 mm• Height 125 mm 125 mm•Depth 120 mm 120 mmWeight• Weight, approx. 330 g 465 g6ES7 326-2BF41-0AB05■ Ordering data Order No. Order No.F digital output module SM 326PROFIBUS bus connector10 outputs, 24 V DC, 2 A PP; C 6ES7 326-2BF10-0AB0width 40 mm8 outputs, 24 V DC, 2 A PM;width 80 mmAccessoriesDistributed Safety V5.4programming toolTask:Software for configuring fail-safeuser programs for SIMATICS7-300F, S7-400F, ET 200SRequirement:STEP 7 V5.3 SP3 and higherFloating licenseSoftware Update ServiceDistributed Safety UpgradeFrom V5.x to V5.4;Floating license for 1 userLabeling sheet with strips for10 electronic blocks• For 16-channel electronicblocks incl. add-on terminals• For 32-channel electronicblocks incl. add-on terminalsConnecting cable forPROFIBUS12 Mbit/s, for connecting PG toPROFIBUS DP, pre-assembledwith 2 x 9-pin Sub-D connector,3 mPROFIBUS bus connector• 90° cable outlet, terminatingresistor with isolating function,without PG socket, up to12 Mbit/s• 90° cable outlet, terminatingresistor with isolating function,without PG socket, up to12 Mbit/s6ES7 326-2BF41-0AB06ES7 833-1FC02-0YA56ES7 833-1FC00-0YX26ES7 833-1FC02-0YE56ES7 193-1BH00-0XA06ES7 193-1BL00-0XA06ES7 901-4BD00-0XA06ES7 972-0BA12-0XA06ES7 972-0BB12-0XA0C: Subject to export regulations: AL: N and ECCN: EAR99H• 90° cable outlet, FastConnectterminating resistor with isolatingfunction, without PG socket,up to 12 Mbit/s;- 1 unit 6ES7 972-0BA52-0XA0- 100 units 6ES7 972-0BA52-0XB0• 90° cable outlet, FastConnectterminating resistor with isolatingfunction, with PG socket, upto 12 Mbit/s;- 1 unit 6ES7 972-0BB52-0XA0- 100 units 6ES7 972-0BB52-0XB0DIN rail for active bus modulesfor max. 5 active bus modules, forfunction "Insertion and removal"• 483 mm (19") long6ES7 195-1GA00-0XA0• 530 mm long6ES7 195-1GF30-0XA0• 620 mm long6ES7 195-1GG30-0XA0• 2000 mm long6ES7 195-1GC00-0XA0Active bus module6ES7 195-7HC00-0XA0BM 1 x 80 for 1 module with80 mm widthSITOP power supply module 6ES7 307-1EA00-0AA0for ET 200M; 120/230 V AC,24 V DC, 5 A; Type PS 307-1ESiemens ST 70 N · 20105/37

SIMATIC S7-300F digital / analog modules© Siemens AG 2010SM 326 F digital output module - Safety Integrated5■ Ordering data Order No. Order No.Front connectors40-pin, with screw contacts• 1 unit• 100 units40-pin with spring-loadedcontacts• 1 unit• 100 units40-pin, with FastConnect• 1 unitLabeling stripsFor fail-safe modules (spare part);10 unitsLabel coverFor fail-safe modules (spare part);10 unitsLK 393 cable guideFor F modules; L+ and Mconnections; 5 units6ES7 392-1AM00-0AA06ES7 392-1AM00-1AB06ES7 392-1BM01-0AA06ES7 392-1BM01-1AB06ES7 392-1CM00-0AA06ES7 392-2XX20-0AA06ES7 392-2XY20-0AA06ES7 393-4AA10-0AA0S7-300 manualDesign, CPU data, module data,instruction listGerman6ES7 398-8FA10-8AA0English6ES7 398-8FA10-8BA0French6ES7 398-8FA10-8CA0Spanish6ES7 398-8FA10-8DA0Italian6ES7 398-8FA10-8EA0SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD,multilingual: S7-200, S7-300, C7,S7-400, SIMATIC DP (DistributedI/O), SIMATIC PC, SIMATIC PG(programming device), STEP 7,Engineering Tools, Runtime Software,SIMATIC PCS 7, SIMATICHMI (Human Machine Interface),SIMATIC NET (Industrial Communication),SIMATIC MachineVision, SIMATIC SensorsSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent S7 Manual CollectionDVD and the three subsequentupdatesA: Subject to export regulations: AL: N and ECCN: EAR99S D: Subject to export regulations: AL: N and ECCN: 5D9925/38 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300SIPLUS F digital-/analog modulesSIPLUS SM 326 F digital input module■ Overview■ Ordering dataOrder No.SIPLUS SM 326F digital input module(extended temperature range andmedial exposure)24 inputs, 24 V DC C 6AG1 326-1BK02-2AB0Accessoriessee SM 326 F digital inputmodule, page 5/35C: Subject to export regulations: AL: N and ECCN: EAR99H5• Digital inputs for the fail-safe SIMATIC S7 systems• They are suitable for connecting:- switches and 2-wire proximity switches (BEROs)- Sensors according to NAMUR and mechanical contacts,also for signals from hazardous areas• With integral safety functions for fail-safe operation• Can be used in fail-safe mode- Centrally: With S7-31xF-2 DP- Distributed in ET 200M: With SIMATIC IM 151-7 F-CPU,S7-31xF-2 DP, S7-416F-2 and S7-400F/FH• Can be used in standard mode as an S7-300 moduleFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuSIPLUS SM 326 F digital input moduleOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data6AG1 326-1BK02-2AB06ES7 326-1BK02-0AB0-25 ... +60 °C,condensation permissibleResistant in accordance with EN60721to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) activesubstances and compliant with ISAS71.04 G1, G2, G3, GX.For further information, refer to Environmentalconditions of SIPLUS extreme(on pg. 5/30) or go towww.siemens.com/siplus-extremeThe technical data of the standardproduct apply with the exception of theenvironmental conditions.Siemens ST 70 N · 20105/39

SIMATIC S7-300SIPLUS F digital-/analog modules© Siemens AG 2010SIPLUS SM 336 F analog input module■ Overview■ Ordering dataSIPLUS SM 336F analog input module(extended temperature range andmedial exposure)6 inputs, 15 bit,C0/4 ... 20 mA HARTAccessoriesOrder No.6AG1 336-4GE00-4AB0see SM 336 F analog inputmodule, catalog ST 70 · 2009,page 4/118C: Subject to export regulations: AL: N and ECCN: EAR99H5• Analog inputs for the fail-safe SIMATIC S7 systems• Applicable in the ET 200M distributed I/O device withIM 153-2 HF as well as centrally with SIMATIC S7-31xF-2 DP• Properties of the SM 336; F-AI 6 x 0/4 ... 20 mA HART:- 6 analog inputs with galvanic isolation between channelsand backplane bus- Input ranges: 0 mA to 20 mA, 4 mA to 20 mA- Short-circuit proof power supply from 2 or 4-wire transmittervia the module- External encoder supply possible- Applicable in safety mode- HART communication- Firmware update using HW Config- Identification dataSIPLUS SM 336 F analog input moduleOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data6AG1 336-4GE00-4AB06ES7 336-4GE00-0AB00 ... +60 °C,condensation permissibleResistant in accordance with EN60721to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) activesubstances and compliant with ISAS71.04 G1, G2, G3, GX.For further information, refer to Environmentalconditions of SIPLUS extreme(on pg. 5/30) or go towww.siemens.com/siplus-extremeThe technical data of the standardproduct apply with the exception of theenvironmental conditions.For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku5/40 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Function modulesIM 174 PROFIBUS module■ Overview• For connecting up to 4 drives with analog setpoint interface orpulse-direction interface to a controller• Operation with isochronous PROFIBUS DP• Connectable drives:- Electrical drives- Hydraulic drives-Stepper drives• Can be used with:- SIMATIC CPU 41x-2 DP, CPU 31x-2 DP, CPU 31xT-2 DP,WinAC RTX 2008- SIMOTION C2xx, SIMOTION P350, SIMOTION D4x5• Can also be used with external encoders5■ Technical specifications6ES7 174-0AA10-0AA0Supply voltagesRated value• 24 V DCYes• permissible range, lower limit 20.4 V(DC)• permissible range, upper limit 28.8 V(DC)Current consumptionCurrent consumption, max. 500 mAfrom backplane bus 5 V DC, 100 mAmax.Power lossPower loss, typ.12 WConnection methodrequired front connector 40-pinIsochronous modeIsochronous modeYesshortest clock pulse1.5 msDigital inputsNumber of digital inputs 10Input voltage• for signal "0"-3 to +5 V• for signal "1"11 to 30 VInput current• for signal "0", max.2mA(permissible quiescent current)• for signal "1", typ.8mAInput delay (for rated value ofinput voltage)• for standard inputs- at "0" to "1", min. 15 µsCable length• Cable length, shielded, max. 100 mDigital outputsNumber of digital outputs 8Short-circuit protectionYes6ES7 174-0AA10-0AA0Switching capacity of the outputs• with resistive load, max. 1A• on lamp load, max.30 WLamp load, max.30 WOutput voltage• Rated value (DC) 24 V; L+• for signal "1", min. L+ (-3 V)• for signal "1" (DC), max. 3VOutput current• for signal "1" permissible range 5mAfor 0 to 55 °C, min.• for signal "1" permissible range 300 mAfor 0 to 55 °C, max.• for signal "0" residual current, 0.4 mAmax.Output delay with resistive load• 0 to "1", max. 500 µsSwitching frequency• with resistive load, max. 500 Hz• with inductive load, max. 0.5 HzCable length• Cable length, shielded, max. 600 mRelay outputsNumber of relay outputs 4Number of operating cycles 50 000Switching capacity of contacts• with resistive load, max. 1AAnalog outputsNumber of analog outputs 4Output ranges, voltage• -10 to +10 VYesSiemens ST 70 N · 20105/41

SIMATIC S7-300Function modules© Siemens AG 20105IM 174 PROFIBUS module■ Technical specifications (continued)Analog value creation6ES7 174-0AA10-0AA0Integrations and conversion time/resolution per channel• Resolution with overrange 15 bit(bit including sign), max.Encoder supply5 V encoder supply•5 V Yes• Output current, max.1.2 A• Cable length, max.25 m24 V encoder supply• 24 VYes• Output current, max.1.4 A• Cable length, max.100 mAbsolute encoder (SSI) encodersupply• Absolute encoder (SSI) Yes• Short-circuit protection YesEncoderNumber of connectable 4encoders, max.Connectable encoders• Incremental encoderYes(symmetrical)• Absolute encoder (SSI) Yes• 2-wire BEROSYes- permissible quiescent current 2mA(2-wire BEROS), max.Encoder signals, incrementalencoder (symmetrical)• Trace mark signalsA, notA, B, notB• Zero mark signalN, notN• Input signal 5 V difference signal (phys. RS 422)• Input frequency, max. 1MHz• Cable length, shielded, max. 35 m;35 m at max. 500 kHz;10 m at max. 1 MHzEncoder signals, absoluteencoder (SSI)• Input signal 5 V difference signal (phys. RS 422)• Data signalDATA, notDATA• Clock signalCL, notCL• Telegram length13, 21, 24 bit• Clock frequency, max. 187.5 KHz1.5 MHz (parameterizable)• Binary code 1• Gray code 1• Cable length, shielded, max. 250 m;250 m at 187.5 kHz,10 m at 1.5 MHz6ES7 174-0AA10-0AA0Number of drive interfaces 4Analog drive• Setpoint signal- Short circuit proof Yes; max. 45 mA,min. 3.3 kOhm load impedance- Range of rated voltage -10.5 V to +10.5 V- Output current -3 to +3 mA• Output controller release- Number of relay contacts 4- Switching voltage, max. 30 V- Switching current, max. 1A- Switching capacity, max. 30 V⋅A- Number of switching cycles, 50 000; at 30 V DC, 1 Amin.- Cable length (shielded), max. 35 mSignal output I• Type- Number of relay contacts 2• Differential output voltage, min.- Switching voltage, max. 30 V• Differential output voltage forsignal "0", max.- Switching current, max. 1A• Differential output voltage, forsignal "1", min.- Switching capacity, max. 30 V⋅A- Number of switching cycles, at 30 V DC, 1 Amin.• Load impedance- Cable length (shielded), max. 35 mSignal output II• Differential output voltage, min. 2 V; R = 100 Ohm• Differential output voltage forsignal "1", min.• Differential output voltage forsignal "0", max.• Load resistance, min.• Output current, max.Signal output III• Pulse frequency• Cable length (shielded), max.Interrupts/diagnostics/status informationAlarms• Diagnostic alarm3.7 V;3.7 V at I = -20 mA;4.5 V at I = -100 µA,1 V; if I = -20 mA55 Ω60 mA750 kHz50 m; in hybrid operation with analogaxes 35 m, in asymmetrical transmission10 mYes5/42 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Function modulesIM 174 PROFIBUS module■ Technical specifications (continued) ■ Ordering data Order No.Galvanic isolationGalvanic isolation digital inputs6ES7 174-0AA10-0AA0• Galvanic isolation digital inputs Yes; to encoders, analog outputs,DP interface; no to other DI/DOsGalvanic isolation digital outputs• Galvanic isolation digitaloutputsDimensions and weightDimensions• Width• Height•DepthWeight• Weight, approx.Yes; to encoders, analog outputs,DP interface; no to other DI/DOs160 mm125 mm118 mm1kgIM 174 PROFIBUS module C 6ES7 174-0AA10-0AA0PROFIBUS module for connectinganalog drives and stepperdrives to a controllerAccessoriesSetpoint cablefor the connection between 6FX2 002-3AD01- 7777IM 174 and SIMODRIVE 611-Afor the connection betweenIM 174 with 3 stepper drives and6FX2 002-3AD02- 7777one SIMODRIVE (end of cable cutoff)0 m 1100 m 2200 m 30 m A10 m B20 m C30 m D40 m E50 m F60 m G70 m H80 m J90 m K0 m A1 m B2 m C3 m D4 m E5 m F6 m G7 m H8 m J0 m K0,0 m 00,1 m 10,2 m 20,3 m 30,4 m 40,5 m 50,6 m 60,7 m 70,8 m 8C: Subject to export regulations: AL: N and ECCN: EAR99H5Siemens ST 70 N · 20105/43

SIMATIC S7-300Function modules© Siemens AG 2010SIPLUS SIWAREX U■ Overview■ Ordering dataOrder No.SIPLUS SIWAREX U(Medial exposure)for SIMATIC S7 and ET 200M,incl. bus connectorTwo-channel versionC 6AG1 950-2AA01-4AA0for connecting two scalesAccessories see SIWAREX U,catalog ST 70 · 2009, page 4/169C: Subject to export regulations: AL: N and ECCN: EAR99H5SIPLUS electronic weighing system SIWAREX USIPLUS SIWAREX U is a flexible weighing module for all simpleweighing and force measuring tasks. The compact module canbe integrated into SIMATIC automation systems without anyproblems. Complete data access is possible via the SIMATIC.For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuSIPLUS SIWAREX U electronic weighing systemOrder No.Order No. based onAmbient temperature rangeAmbient conditionsTechnical data6AG1 950-2AA01-4AA07MH4 950-2AA010 ... +60 °C,condensation permissibleResistant in accordance with EN60721to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) activesubstances and compliant with ISAS71.04 G1, G2, G3, GX.For further information, refer to Environmentalconditions of SIPLUS extreme(on pg. 5/30) or go towww.siemens.com/siplus-extremeThe technical data of the standardproduct apply with the exception of theenvironmental conditions.5/44 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300CommunicationSIPLUS CP 340■ Overview• The low-cost, complete solution for serial communication overa point-to-point connection• RS 232C (V.24) and RS 422/485 (X.27)• Implemented protocols:-ASCII- 3964 (R) (not for RS 485)- Printer driver• Simple parameterization using tool integrated in STEP 7For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku5SIPLUS CP 340 version RS 422/485 (X.27) RS 232 (V.24)Order No. 6AG1 340-1CH02-2AE0 6AG1 340-1AH02-2AE0 6AG1 340-1AH02-2AY0Order No. based on 6ES7 340-1CH02-0AE0 6ES7 340-1AH02-0AE0 6ES7 340-1AH02-0AE0Ambient temperature range -25 ... +60 °C, condensation permissibleAmbient conditionsResistant in accordance with EN60721 to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) active substances and compliant with ISA S71.04 G1, G2, G3, GX.For further information, refer to Environmental conditions of SIPLUS extreme(on pg. 5/30) or go towww.siemens.com/siplus-extremeConforms with standard for electronic No No Yesequipment used on rolling stock(EN 50155, temperature T1,category 1).Technical dataThe technical data of the standard product apply with the exception of the environmental conditions.■ Ordering data Order No. Order No.SIPLUS CP 340 communicationsprocessor RS 232 C(extended temperature range andmedial exposure)with one RS 232C interface (V.24) 6AG1 340-1AH02-2AE0acc. to EN 50155 C 6AG1 340-1AH02-2AY0RS 232 connecting cableFor linking to SIMATIC S75 m 6ES7 902-1AB00-0AA010 m 6ES7 902-1AC00-0AA015 m 6ES7 902-1AD00-0AA0SIPLUS CP 340 communicationsprocessor RS 422/485(extended temperature range andmedial exposure)With 1 RS 422/485 (X.27)6AG1 340-1CH02-2AE0interfaceRS 422/485 connecting cablefor linking to SIMATIC S75 m 6ES7 902-3AB00-0AA010 m 6ES7 902-3AC00-0AA050 m 6ES7 902-3AG00-0AA0C: Subject to export regulations: AL: N and ECCN: EAR99HSiemens ST 70 N · 20105/45

SIMATIC S7-300Communication© Siemens AG 2010CP 341■ Overview• For quick, high-performance data exchange via point-to-pointcoupling• 3 versions with different transmission physics:- RS 232C (V.24),- 20 mA (TTY),- RS 422/RS 485 (X.27)• Implemented protocols: ASCII, 3964 (R), RK 512• The following protocols can also be loaded: Modbus RTU• Easy configuration using a parameterizing tool integrated inSTEP 75■ Technical specifications6ES7 341-1AH02-0AE0 6ES7 341-1BH02-0AE0 6ES7 341-1CH02-0AE0Product type designation CP 341 V2 RS232 CP 341 V2 TTY CP 341 V2 RS422/485Supply voltagesRated value• 24 V DC Yes Yes YesCurrent consumptionfrom backplane bus 5 V DC, max. 70 mA 70 mA 70 mAfrom supply voltage L+, max. 100 mA 100 mA 100 mAPower lossPower loss, max. 2.4 W 2.4 W 2.4 WPower loss, typ. 1.6 W 1.6 W 1.6 WInterfacesNumber of interfaces 1; Isolated 1; Isolated 1; IsolatedInterface physics, 20 mA (TTY)YesInterface physics, RS 232C (V.24)YesInterface physics, RS 422/RS 485 (X.27)YesTransmission rate, max. 115.2 kbit/s 19.2 kbit/s 115.2 kbit/sTransmission rate, min. 0.3 kbit/s 0.3 kbit/s 0.3 kbit/sConnection methodPtP 9-pin sub D connector 9-pin sub D socket 15-pin sub D socketPower supply 3 screw terminals: L+, M, GND 3 screw terminals: L+, M, GND 3 screw terminals: L+, M, GNDPoint-to-pointCable length, max. 15 m 1 000 m 1200msupported printers Serial printers Serial printers Serial printersIntegrated protocol driver• 3964 (R) Yes Yes Yes; not with RS 485• ASCII Yes Yes Yes• RK512 Yes Yes Yes; not with RS 485Telegram length, max.• 3964 (R) 4 096 byte 4 096 byte 4096byte• ASCII 4 096 byte 4 096 byte 4096byte• RK 512 4 096 byte 4 096 byte 4096byte5/46 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300CommunicationCP 341■ Technical specifications (continued)6ES7 341-1AH02-0AE0 6ES7 341-1BH02-0AE0 6ES7 341-1CH02-0AE0Product type designation CP 341 V2 RS232 CP 341 V2 TTY CP 341 V2 RS422/485Transmission speed, 20 mA (TTY)• with 3964 (R) protocol, max.• with ASCII protocol, max.• with printer driver, max.• with RK 512 protocol, max.Transmission speed, RS 422/485• with 3964 (R) protocol, max.• with ASCII protocol, max.• with printer driver, max.• with RK 512 protocol, max.Transmission speed, RS232• with 3964 (R) protocol, max.• with ASCII protocol, max.• with printer driver, max.• with RK 512 protocol, max.SoftwareBlock• FB length in RAM, max.115.2 kbit/s115.2 kbit/s115.2 kbit/s115.2 kbit/s6 100 byte; Data communication,sending and receiving19.2 kbit/s19.2 kbit/s19.2 kbit/s19.2 kbit/s6 100 byte; Data communication,sending and receiving115.2 kbit/s115.2 kbit/s115.2 kbit/s115.2 kbit/sDimensions and weightDimensions and weight• Width 40 mm 40 mm 40 mm• Height 125 mm 125 mm 125 mm•Depth 120 mm 120 mm 120 mmWeight• Weight, approx. 300 g 300 g 300 g6 100 byte; Data communication,sending and receiving5■ Ordering data Order No. Order No.CP 341 communication module 6ES7 341-1AH02-0AE0CP 341 communication module 6ES7 341-1CH02-0AE0With one RS 232 C (V.24)interfaceRS 232 connecting cableFor linking to SIMATIC S75 m 6ES7 902-1AB00-0AA010 m 6ES7 902-1AC00-0AA015 m 6ES7 902-1AD00-0AA0CP 341 communication module 6ES7 341-1BH02-0AE0With one 20 mA (TTY) interface20 mA (TTY) connecting cableFor linking to SIMATIC S75 m 6ES7 902-2AB00-0AA010 m 6ES7 902-2AC00-0AA050 m 6ES7 902-2AG00-0AA0With one RS 422/485 (X.27) interfaceRS 422/485 connecting cableFor linking to SIMATIC S75 m 6ES7 902-3AB00-0AA010 m 6ES7 902-3AC00-0AA050 m 6ES7 902-3AG00-0AA0Loadable drivers for CP 341MODBUS master (RTU format)• Single license6ES7 870-1AA01-0YA0• Single license, without software 6ES7 870-1AA01-0YA1or documentationMODBUS slave (RTU format)• Single license6ES7 870-1AB01-0YA0• Single license, without software 6ES7 870-1AB01-0YA1or documentationSiemens ST 70 N · 20105/47

SIMATIC S7-300Communication© Siemens AG 2010SIPLUS CP 341■ Overview• For fast, high-performance serial data exchange via point-topointcoupling• 3 versions with different physical transmission characteristics:- RS 232C (V.24),- 20 mA (TTY),-RS422/RS485(X.27)• Implemented protocols: ASCII, 3964 (R), RK 512, customizedprotocols (can be reloaded)• Simple parameterization using tool integrated in STEP 75SIPLUS CP 341 RS 232C interface (V.24) RS 422/485 (X.27) interfaceOrder No. 6AG1 341-1AH02-7AE0 6AG1 341-1CH02-7AE0Order No. based on 6ES7 341-1AH02-0AE0 6ES7 341-1CH02-0AE0Ambient temperature rangeAmbient conditionsTechnical data- 25 ... +70 °C, condensation permissibleResistant in accordance with EN60721 to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) active substances and compliant with ISA S71.04 G1, G2, G3, GX.For further information, refer to Environmental conditions of SIPLUS extreme(on pg. 5/30) or go towww.siemens.com/siplus-extreme.The technical data of the standard product apply with the exception of the environmental conditions.■ Ordering data Order No. Order No.SIPLUS CP 341Ccommunication module(extended temperature range andmedial exposure)With one RS 232 C (V.24)interface6AG1 341-1AH02-7AE0SIPLUS CP 341C 6AG1 341-1CH02-7AE0communication module(extended temperature range andmedial exposure)With one RS 422/485 (X.27) interfaceAccessories see CP 341, page 5/47C: Subject to export regulations: AL: N and ECCN: EAR99H5/48 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300CommunicationSIPLUS CP 343-1 Lean■ Overview• Interface for the SIMATIC S7-300 to Industrial Ethernet (not forSINUMERIK)- 2 x RJ45 interface for 10/100 Mbit/s full/half duplex connection(with autosensing for automatic switchover andautocrossover function)- Integral 2-port real-time switch ERTEC- Multi-protocol operation with TCP and UDP transport protocoland PROFINET I/O- Keep Alive function• Communication services:- Open communication (TCP/IP and UDP)- PG/OP communication- S7 communication (server)- PROFINET IO Device• Multicast for UDP• Remote programming and initial start-up is possible exclusivelyover Industrial Ethernet• IT communication- Web function• Integration into network management through SNMP• Configuring with STEP 7• Cross-network programming device/operator panel communicationthrough S7 routing• Diagnostic possibilities in STEP 7 and with web browser5For further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuSIPLUS CP 343-1 LeanOrder No. 6AG1 343-1CX10-4XE0 6AG1 343-1CX10-2XE0Order No. based on 6GK7 343-1CX10-0XE0 6GK7 343-1CX10-0XE0Ambient temperature range 0 ... +60 °C, condensation permissible -25 ... +60 °C, condensation permissibleAmbient conditionsResistant in accordance with EN60721 to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) active substances and compliant with ISA S71.04 G1, G2, G3, GX.For further information, refer to Environmental conditions of SIPLUS extreme(on pg. 5/30) or go towww.siemens.com/siplus-extreme.Technical dataThe technical data of the standard product apply with the exception of the environmental conditions.■ Ordering data Order No. Order No.SIPLUS CP 343-1 Leancommunications processor(extended temperature range andmedial exposure)For connecting SIMATIC S7-300to Industrial Ethernet throughTCP/IP and UDP, Multicast, S7communication, open communication(SEND/RECEIVE),FETCH/WRITE, PROFINET IOdevice, integral 2-port switchERTEC, comprehensive diagnosticsfacilities, module replacementwithout PG, SNMP, initialcommissioning over LAN; withelectronic manual on CD-ROM0 ... +60 °C, condensationpermissible-25 ... +60 °C, condensationpermissible6AG1 343-1CX10-4XE06AG1 343-1CX10-2XE0Accessoriessee CP 343-1 Lean,catalog ST 70 · 2009, page 4/207Siemens ST 70 N · 20105/49

SIMATIC S7-300Communication© Siemens AG 20105CP 343-1 ERPC■ OverviewISOTCP/UDPPNMRPIP-RPG/OPS7/S5• The CP 343-1 ERPC (Enterprise Connect) is a communicationsprocessor for connecting the SIMATIC S7-300 to anIndustrial EthernetITG_IK10_XX_10280• Support of a connection of the SIMATIC S7-300 to variousdatabase systems for the vertical integration by means of afirmware expansion from ILS-Technology to be ordered separately• RJ45 interface for 10/100/1000 Mbit/s full/half duplex withautosensing/autonegotiation/autocrossover and sleeve• Communication services- Open communication (SEND/RECEIVE)- PG/OP communication- S7 communication (client, server, multiplexing) incl. routing• Access protection by means of a configurable IP access list• Remote programming and first commissioning via IndustrialEthernet• Configuring with STEP 7• Time synchronization by means of NTP or SIMATIC procedure• Support of module replacement without programming device;all configuration data is stored on the C-PLUG.When using the database function, the CP 343-1 ERPC mustbe prepared for the exchange, i.e. the firmware extension fromILS Technology must already be installed on the replacementmodule.• Extensive diagnostics functions via STEP 7 or web browser• Integration into network management systems through thesupport of SNMP V1 MIB-II■ Technical specifications6GK7 343-1FX00-0XE0Product type designation CP 343-1 ERPCData transmission rateTransmission rate at interface 1 10 … 1 000 Mbit/sInterfacesNumber of electrical connections• at interface 1 in accordance with 1Industrial Ethernet• For power supply 1Design of electrical connection• at interface 1 in accordance with RJ45 portIndustrial Ethernet• For power supply2-pin plug-in terminal stripDesign of the swap medium C-Plug YesSupply voltage, currentconsumption, power lossType of power supplyDCPower supply• 1 from backplane bus5V• External24 VRelative positive tolerance at 20 %24 V DCRelative negative tolerance at 15 %24 V DC6GK7 343-1FX00-0XE0Product type designation CP 343-1 ERPCCurrent consumed• Typical from backplane bus at 0.3 A5V DC• Maximum from external power 0.6 Asupply for 24 V DCEffective power loss14.7 WPermitted ambient conditionsAmbient temperature• During operating phase 0 … 60 °C• During storage -40 … +70 °C• During transport -40 … +70 °CRelative humidity at 25 °C without 95 %condensation during operatingphase, maximumIP degree of protection IP 20Design, dimensions and weightsModule format Compact module S7-300double widthWidth80 mmHeight125 mmDepth120 mmNet weight0.8 kg5/50 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Communication■ Technical specifications (continued)Product type designationPerformance dataPerformance data Open communication6GK7 343-1FX00-0XE0CP 343-1 ERPCNumber of possible connections for 8open communication by means ofSEND/RECEIVE blocks, maximumData volume• As user data per connection for 8 Kibyteopen communication by means ofSEND/RECEIVE blocks, maximum• As user data per ISO on TCP connectionfor open communication8 Kibyteby means of SEND/RECEIVEblocks, maximum• As user data per TCP connection 8 Kibytefor open communication by meansof SEND/RECEIVE blocks, maximum• As user data per UDP connection 2 Kibytefor open IE communication bymeans of SEND/RECEIVE blocks,maximumNumber of multicast stations 8Performance data S7 communicationNumber of possible connections forS7 communication• Maximum 8• For PG/OP connections, maximum 8Performance data MultiprotocoloperationNumber of active connections for 32multiprotocol operationPerformance data IT functionsNumber of possible connections as 1server with HTTP, maximumNumber of possible write cycles of 100 000the flash memory cellsCP 343-1 ERPC6GK7 343-1FX00-0XE0Product type designation CP 343-1 ERPCPerformance data ERPC functionsNumber of configurable ERPCsymbols for database access• Per CPU, maximum 2000• Per logical trigger, maximum 255Data quantity as user data and 8 Kibyteheader information per logicaltriggerProduct functions Management,configuration, programmingProduct function: MIB support YesProtocol is supported•SNMP v1Yes• DCPYes• LLDPYesConfiguration software required NCM S7 for Industrial Ethernet(is delivered with STEP 7 V5.x)Product functions DiagnosticsProduct function: Web-based diagnosticsYesProduct functions RedundancyProduct function• Ring redundancyNoProduct functions SecurityProduct function• ACL - IP-basedYes• Switching-off non-required Yesservices• Blocking of communication via Yesphysical portsProduct functions TimeProduct function• SICLOCK supportNo• Passing-on of time synchronizationYesNTP protocol is supportedYes5Siemens ST 70 N · 20105/51

SIMATIC S7-300Communication© Siemens AG 2010CP 343-1 ERPC5■ Ordering data Order No. Order No.CP 343-1 communications 6GK7 343-1FX00-0XE0processor ERPC (EnterpriseConnect)For the connection of SIMATICS7-300 to Industrial Ethernet andfor the support of the databaseconnection of the SIMATICS7-300 to various databases;TCP/UDP, S7 communication,open communication(SEND/RECEIVE), with and withoutRFC 1006, multicast, webserver, setting of CPU’s clockusing SIMATIC procedures andNTP, access protection via IPaccess list, SNMP, DHCP, initializationover LAN10/100/1000 Mbit/s; with electronicmanual on DVD, C-PLUGincluded in scope of deliveryAccessoriesC-PLUG6GK1 900-0AB00Swap medium for simple replacementof devices in the event of afault; for recording configurationor engineering and applicationdata; can be used for SIMATICNET products with C-PLUG slotSOFTNET Edition 2008 forIndustrial EthernetSoftware for S7 and open communication,incl. OPC server,PG/OP communication andNCM PC, runtime software,software and electronic manualon CD-ROM, license key on USBflash drive, Class A, for 32-bitWindows XP Professional SP2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1; Windows 2008 Server;German/EnglishSOFTNET-S7 Edition 2008 forIndustrial Ethernetup to 64 connections• Single license for 1 installation D 6GK1 704-1CW71-3AA0• Software Update Service for 6GK1 704-1CW00-3AL01year,with automatic extension;requirement:current software version• Upgrade from Edition 2006 D 6GK1 704-1CW00-3AE0and higher to Edition 2008• Upgrade from V6.0, V6.1,V6.2 or V6.3 to Edition 2008D 6GK1 704-1CW00-3AE1SOFTNET Edition 2008 forIndustrial EthernetSOFTNET-S7 Lean Edition 2008for Industrial Ethernetup to 8 connections• Single license for 1 installation D 6GK1 704-1LW71-3AA0• Software Update Service for 6GK1 704-1LW00-3AL01 year,with automatic extension;requirement:current software version• Upgrade from Edition 2006 D 6GK1 704-1LW00-3AE0and higher to Edition 2008• Upgrade from V6.0, V6.1, D 6GK1 704-1LW00-3AE1V6.2 or V6.3 to Edition 2008S7-1613 Edition 2008Software for S7 and open communication,incl. PG/OP communication,OPC server and NCMPC; up to 120 connections,runtime software, software andelectronic manual on CD-ROM,license key on USB stick, Class A,for 32-bit Windows XP ProfessionalSP2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;for CP 1613/CP 1613 A2/CP 1623;German/English• Single license for 1 installation D 6GK1 716-1CB71-3AA0• Software Update Service for 6GK1 716-1CB00-3AL01 year,with automatic extension;requirement:current software version• Upgrade S7-1613,D 6GK1 716-1CB00-3AE0Edition 2006 or higher,to S7-1613 Edition 2008• Upgrade S7-1613D 6GK1 716-1CB00-3AE1from V6.0, V6.1, V6.2 or V6.3to S7-1613 Edition 2008IE FC RJ45 Plug 180RJ45 plug connector for IndustrialEthernet with a rugged metalenclosure and integrated insulationdisplacement contacts forconnecting Industrial Ethernet FCinstallation cables; with 180°cable outlet; for network componentsand CPs/CPUs with IndustrialEthernet interface• 1 pack = 1 unit6GK1 901-1BB10-2AA0• 1 pack = 10 units6GK1 901-1BB10-2AB0• 1 pack = 50 units6GK1 901-1BB10-2AE0D: Subject to export regulations: AL: N and ECCN: 5D9925/52 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300CommunicationCP 343-1 ERPC■ Ordering data Order No. Order No.IE FC TP Standard Cable GP2 x 2 (Type A)6XV1 840-2AH10IE FC TP Flexible Cable GP4x24-core, shielded TP installationcable for connection to IEFC outlet RJ45/ IE FC RJ45 plug;PROFINET-compatible;with UL approval;sold by the meter;max. length 1 000 m,minimum order 20 mSCALANCE X308-2Industrial Ethernet Switch2 x 1000 Mbit/s multimode fiberopticcable ports (SC sockets),1 x 10/100/1000 Mbit/s RJ45 port,7 x 10/100 Mbit/s RJ45 ports;for glass fiber-optic cable(multimode) up to 750 m longIE FC RJ45 Plug 4 x 2RJ45 plug connector for IndustrialEthernet (10/100/1000 Mbit/s)with a rugged metal enclosureand integrated insulation displacementcontacts for connectingIndustrial Ethernet FCinstallation cables;180° cable outlet; for networkcomponents and CPs/CPUs withIndustrial Ethernet interface6GK5 308-2FL00-2AA38-core, shielded TP installationcable for occasional movement;with UL approval;sold by the meter;max. length 1 000 m;minimum order 20 m• AWG 24,for connection to IE FC RJ45Plug 4x2STEP 7 Version 5.4Target system:SIMATIC S7-300/400,SIMATIC C7, SIMATIC WinACRequirements:Windows XP Prof., Vista Ultimate,Vista BusinessType of delivery:German, English, French,Spanish, Italian;incl. license key on USB stick,with electronic documentationFloating license on DVDRental license for 50 hoursSoftware Update Service on DVD(requires current softwareversion)6XV1 878-2B6ES7 810-4CC08-0YA56ES7 810-4CC08-0YA66ES7 810-4BC01-0YX25• 1 pack = 1 unit• 1 pack = 10 units• 1 pack = 50 unitsIE FC TP standard cable GP4 x 28-core, shielded TP installationcable for universal use;with UL approval;sold by the meter;max. length 1 000 m;minimum order 20 m• AWG 22,for connection to IE FC RJ45Modular Outlet6GK1 901-1BB11-2AA06GK1 901-1BB11-2AB06GK1 901-1BB11-2AE06XV1 870-2EUpgrade Floating License3.x/4.x/5.x to V5.4; on DVDTrial License STEP 7 V5.4;on DVD, 14 day trialdeviceWISE Embedded Editionfor SIMATIC S7Firmware extension for connectionto various database systems6ES7 810-4CC08-0YE56ES7 810-4CC08-0YA7See deviceWISE EmbeddedEdition for SIMATIC S7ILS Technology LLC;5300 Broken Sound Blvd.Suite 150Boca Raton, FL, USA, 33487Tel.: +1-561-982-9898 x124Fax.: +1-561-982-8638E-Mail:devicewise@ilstechnology.com• AWG 24,for connection to IE FC RJ45Plug 4 x 26XV1 878-2ASiemens ST 70 N · 20105/53

SIMATIC S7-300Communication© Siemens AG 2010CP 343-1 BACnet■ Overview5BACnetTCP/UDPPNMRPITIP-RPG/OPS7/S5G_IK10_XX_10275BACnet (Building Automation and Control Networks) is a communicationprotocol for data networks in building automationand control developed by ASHRAE (American Society of Heating,Refrigeration and Air Conditioning Engineers Inc.). It isequally suitable for both the management and automation leveland is recognized as an ANSI, CEN and ISO standard.• The CP 343-1 BACnet is a communications processor for theconnection of the SIMATIC S7-300 to the Industrial Ethernetand via the BACnet protocol it also permits the integration insystems that support the BACnet protocol• 2 x RJ45 interfaces for 10/100 Mbit/s full/half duplex connectionwith autosensing/autonegotiation/autocrossover functionality• Integrated 2-port switch• Communication services- Open communication (SEND/RECEIVE)- PG/OP communication (TCP/IP)- S7 communication (server)- BACnet communication based on TCP/IP, BACnet serveraccording to EN 16484, Part 5• Extensive diagnostics functions via STEP 7• Integration into network management systems through thesupport of SNMP V1 MIB-II■ Technical specifications6FL4 343-1CX10-0XE0Product type designation CP 343-1 BACnetTransmission rateTransmission rate at interface 1 10 … 100 Mbit/sInterfacesNumber of electrical connections• at interface 1 in accordance with 2Industrial Ethernet• For power supply 1Design of electrical connection• at interface 1 in accordance with RJ45 portIndustrial Ethernet• For power supply2-pin plug-in terminal stripSupply voltage, currentconsumption, power lossType of power supplyDCPower supply• 1 from backplane bus5V• External24 VRelative positive tolerance at 20%24 V DCRelative negative tolerance at 15%24 V DCCurrent consumed• from backplane bus at 5 V DC, 0.2 Atypical• Maximum from external power 0.2 Asupply for 24 V DCEffective power loss5.8 W6FL4 343-1CX10-0XE0Product type designation CP 343-1 BACnetPermitted ambient conditionsAmbient temperature• During operating phase 0 … 60 °C• During storage -40 … +70 °C• During transport -40 … +70 °CRelative humidity at 25 °C without 95%condensation during operatingphase, maximumIP degree of protectionIP20Design, dimensions and weightsModule formatCompact module S7-300,single-widthWidth40 mmHeight125 mmDepth120 mmNet weight0.22 kgProduct properties, functions,components GeneralMaximum number of modules per 1CPUNumber of modules - NoteWithout BACnet protocol:Max. 8 per stationPerformance dataPerformance dataOpen communicationNumber of possible connections for 8open communication by means ofSEND/RECEIVE blocks, maximum5/54 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300CommunicationCP 343-1 BACnet■ Technical specifications (continued)6FL4 343-1CX10-0XE06FL4 343-1CX10-0XE0Product type designationCP 343-1 BACnetProduct type designationCP 343-1 BACnetData volume• As user data per TCP connection 8 Kibytefor open communication by meansof SEND/RECEIVE blocks, maximum• As user data per UDP connection 2 Kibytefor open IE communication bymeans of SEND/RECEIVE blocks,maximumNumber of multicast stations 8Performance dataS7 communicationNumber of possible connections forS7 communication• Maximum 4• Maximum with PG connections 2• Maximum with PG/OP2connectionsPerformance dataMultiprotocol operationProduct functions Management,configuration, programmingProduct function: MIB supportProtocol is supported•SNMP v1• DCP• LLDPConfiguration software requiredProduct functions DiagnosticsProduct function: Web-baseddiagnosticsProduct functions SwitchYesYesYesYesSTEP 7 version V5.4 SP5 andhigher plus HSP.An additional runtime license"Building Integration" (referencenumber S55372-C107) isrequired to use the BACnetprotocol on the module. To orderthe license, please contact yourregional Siemens partner.No5Number of active connections inmultiprotocol modePerformance data BACnetBACnet/IP protocol is supportedProduct function• BACnet device type AAC (AdvancedApplication Controller)• Peer-to-peer between BACnetautomation stations• BBMD (BACnet BroadcastManagement Device)Maximum number of BACnet I/Oobjects12YesYesYesYes800Product function: SwitchProduct function• Switch-managed• Configuration with STEP 7Product functions TimeProduct function• SICLOCK support• Passing-on of time synchronizationProtocol is supported NTPYesNoYesYesYesYesMaximum number of BACnetobjects, total1 500Influence on the cycle time of theautomation systemNo effectRequired storage capacity ofS7 CPU’s main memory4 KibyteStandard for BACnetCommunication based on TCP/IP,BACnet server in accordancewith EN 16484, Part 5Siemens ST 70 N · 20105/55

SIMATIC S7-300Communication© Siemens AG 2010CP 343-1 BACnet5■ Ordering data Order No. Order No.CP 343-1 BACnetcommunications processorfor the connection of SIMATICS7-300 to Industrial Ethernet andfor the integration of the SIMATICS7 into BACnet systems;BACnet protocol, S7 communication,open communication(SEND/RECEIVE),with/without RFC 1006; UDP,PG/OP communicationAccessoriesIE FC TP Standard Cable GP2 x 2 (Type A)4-core, shielded TP installationcable for connection to IEFC Outlet RJ45/IE FC RJ45 Plug;PROFINET-compatible;with UL approval;Sold by the meter;max. length 1 000 m,minimum order 20 mIE FC RJ45 Plug 145RJ45 plug connector 2 x 2 forIndustrial Ethernet with a ruggedmetal enclosure and integratedinsulation displacement contactsfor connecting Industrial EthernetFC installation cables;with 145° cable outlet• 1 pack = 1 unit• 1 pack = 10 units• 1 pack = 50 units6FL4 343-1CX10-0XE06XV1 840-2AH106GK1 901-1BB30-0AA06GK1 901-1BB30-0AB06GK1 901-1BB30-0AE0SCALANCE X204-2Industrial Ethernet switchIndustrial Ethernet switches withintegrated SNMP access, onlinediagnostics, copper cable diagnosticsand PROFINET diagnosticsfor configuring line, star andring topologies; with integratedredundancy manager; incl.operating instructions, IndustrialEthernet network manual andconfiguration software onCD-ROM;four 10/100 Mbit/s RJ45 ports andtwo FO portsSTEP 7 Version 5.4Target system:SIMATIC S7-300/400,SIMATIC C7, SIMATIC WinACRequirements:Windows XP Prof., Vista Ultimate,Vista BusinessType of delivery:German, English, French,Spanish, Italian;incl. license key on USB stick,with electronic documentationFloating license on DVDRental license for 50 hoursSoftware Update Service on DVD(requires current softwareversion)Upgrade Floating License3.x/4.x/5.x to V5.4; on DVDTrial License STEP 7 V5.4;on DVD, 14 day trial6GK5 204-2BB10-2AA36ES7 810-4CC08-0YA56ES7 810-4CC08-0YA66ES7 810-4BC01-0YX26ES7 810-4CC08-0YE56ES7 810-4CC08-0YA75/56 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Communication■ Overview• Unmanaged switch for the connection of a SIMATIC S7-300with integral PROFINET interface or with an Industrial EthernetCP or ET 200M to an Industrial Ethernet in an electrical linear,tree or star structure• As many as three additional nodes can be connected• As an unmanaged switch, the CSM 377 is used for integratingsmall machines into existing automation networks or for thestandalone operation of the machines• Simple, space-saving attachment to S7-300 mounting rail dueto design as single-width module in S7-300 format• Low-cost solution for implementing small, local Ethernet networks• Rugged, industry-standard node connections withPROFINET-compliant RJ45 connectors that latch onto theenclosure to offer additional strain and bending relief■ Technical specifications6GK7 377-1AA00-0AA0Product type designation CSM 377Transmission rateTransmission rate 110 Mbit/sTransmission rate 2100 Mbit/sInterfacesNumber of electrical/optical 4connections for network componentsor terminal equipment,maximumNumber of electrical connections• for network components or 4terminal equipment• for power supply 1Design of electrical connection• for network components or RJ45 portterminal equipment• for signaling contact -• for power supply2-pin terminal blockSupply voltage, currentconsumption, power lossType of voltage• of power supplyDCCSM 377 unmanaged6GK7 377-1AA00-0AA0Product type designation CSM 377External power supply24 V• Minimum19.2 V• Maximum28.8 VCurrent consumed, maximum 0.07 AProduct component: fusing at Yespower supply inputDesign of fusing at input for power 0.5 A / 60 VsupplyEffective power loss at 24 V with DC 1.6 WPermissible ambient conditionsAmbient temperature• During operating phase 0 … 60 °C• During storage -40 … +70 °C• During transport -40 … +70 °CRelative humidity at 25 °C without 95%condensation during operatingphase, maximumIP degree of protection IP 20Design, dimensions and weightsDesignSIMATIC S7-300 designWidth40 mmHeight125 mmDepth118 mmNet weight0.2 kgType of mounting• 35 mm DIN rail mountingNo• Wall mountingNo• S7-300 rail mountingYesProduct properties, functions,components GeneralCascading with star topology -Product function: Switch-managed NoStandards, specifications,approvalsStandard• for EMC of FM FM3611: Class 1, Division 2,Group A, B, C, D / T.., CL.1,Zone 2, GP. IIC, T.. Ta• For hazardous zoneEN 60079-15, II 3 G Ex nA II T..,KEMA 06 ATEX 0021 X• For CSA and UL safety UL 508, CSA C22.2 No. 142• for hazardous zone of CSA and UL UL 1604 and UL 2279-15(Hazardous Location)• For emitted interference EN 61000-6-4• For noise immunity EN 61000-6-2Certificate of suitability EN 61000-6-2, EN 61000-6-4• CE markYes•C-TickYes5Siemens ST 70 N · 20105/57

SIMATIC S7-300Communication© Siemens AG 2010CSM 377 unmanaged5■ Ordering data Order No. Order No.CSM 377Compact Switch ModuleUnmanaged switch for theconnection of a SIMATIC S7-300,ET200M and as many as threeother nodes to an IndustrialEthernet operating at10/100 Mbit/s;4 x RJ45 ports; external 24 V DCpower supply, LED diagnostics,S7-300 module incl. electronicequipment manual on CD-ROMAccessoriesIE TP cord RJ45/RJ45TP cable 4 x 2 with 2 RJ45connectors• 0.5 mIE FC TP Standard Cable GP2 x 2 (Type A)4-core, shielded TP installationcable for connection to IEFC outlet RJ45/ IE FC RJ45 plug;PROFINET-compliant;with UL approval;sold by the meter;max. quantity 1 000 m,minimum order 20 mIE FC Trailing Cable 2 x 2(Type C)4-core, shielded TP installationcable for connection to IEFC outlet RJ45/ IE FC RJ45 plug180/90 for tow chain use;PROFINET-compliant;with UL approval;sold by the meter;max. quantity 1 000 m,minimum order 20 m6GK7 377-1AA00-0AA06XV1 870-3QE506XV1 840-2AH106XV1 840-3AH10IE FC RJ45 Plug 180RJ45 plug connector for IndustrialEthernet with a rugged metalhousing and integrated insulationdisplacement contacts for connectingIndustrial Ethernet FCinstallation cables;180° cable outlet; for networkcomponents and CPs/CPUs withIndustrial Ethernet interface• 1 pack = 1 item• 1 pack = 10 items• 1 pack = 50 itemsIE FC stripping toolPre-adjusted stripping tool for thefast stripping of Industrial EthernetFC cablesIE FC RJ45 outletFor connecting Industrial EthernetFC cables and TP Cords;block pricing for quantities ofmore than 10 or 50 unitsSIMATIC NETManual CollectionElectronic manuals for communicationsystems, communicationprotocols, and communicationproducts; on DVD;German/English6GK1 901-1BB10-2AA06GK1 901-1BB10-2AB06GK1 901-1BB10-2AE06GK1 901-1GA006GK1 901-1FC00-0AA06GK1 975-1AA00-3AA05/58 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Power suppliesPower supplies■ Overview• Load current supplies for S7-300/ET 200M• To convert the line voltage to the required operating voltage(24 V DC)• Output current 2 A, 5 A or 10 A5■ Technical specificationsPower supply, type 2 A 5 A 10 AOrder number 6ES7 307-1BA01-0AA0 6ES7 307-1EA01-0AA0 6ES7 307-1KA02-0AA0Input 1-phase AC 1-phase AC 1-phase ACRated voltage V in rated120/230 V ACautomatic range switching120/230 V ACautomatic range switching120/230 V ACautomatic range switchingVoltage range 85 ... 132 V/170 ... 264 V 85 ... 132 V/170 ... 264 V 85 ... 132 V/170 ... 264 VOvervoltage resistance 2.3 x V in rated, 1.3 ms 2.3 x V in rated, 1.3 ms 2.3xV in rated, 1.3 msLine buffering at I out rated > 20 ms at V in = 93/187 V > 20 ms at V in = 93/187 V > 20 ms at V in = 93/187 VRated line frequency; rated line-frequency 50/60 Hz, 47 ... 63 Hz 50/60 Hz; 47 ... 63 Hz 50/60 Hz; 47 ... 63 HzrangeRated current I in rated 0.9/0.5 A 2.3/1.2 A 4.2/1.9 ASwitch-on current limit (+25 °C) < 22 A, < 3 ms < 20 A, < 3 ms < 55 A, < 3 msI 2 t < 1.0 A 2 s < 1.2 A 2 s < 3.3 A 2 sBuilt-in line-side fuse T 1.6 A/250 V (inaccessible) T 3.15 A/250 V (inaccessible) T 6.3 A/250 V (inaccessible)Recommended miniature circuit-breaker(IEC 898) in the supply line3 A, C Characteristic At and above 6 A,C characteristicAt and above 10 A,C characteristicOutput Controlled, isolated DC voltage Controlled, isolated DC voltage Controlled, isolated DC voltageRated voltage V out rated 24 V DC 24 V DC 24 V DCTotal tolerance ±3 % ±3 % ±3 %• Static line smoothing approx. 0.1 % approx. 0.1 % approx. 0.1 %• Static load smoothing approx. 0.2 % approx. 0.5 % approx. 0.5 %Ripple content < 50 m Vpp (typ. < 5 m Vpp) < 50 mV pp (typ. 10 mV pp ) < 50 mV pp (typ. 15 mV pp )Spikes (bandwidth: 20 MHz) < 150 mV pp (typ. < 20 mV pp ) < 150 mV pp (typ. 20 mV pp ) < 150 mV pp (typ. 60 mV pp )Adjustment range - - -Status indicator Green LED for 24 V OK Green LED for 24 V OK Green LED for 24 V OKResponse on activation/deactivation No overshoot of V out (soft start) No overshoot of V out (soft start) No overshoot of V out (soft start)Startup delay/voltage rise < 2 s/typ. 10 ms < 2 s/typ. 10 ms < 2 s/typ. 10 msRated current I out rated 2 A 5 A 10 ACurrent range• Up to +60 °C 0...2A 0...5 A 0 ... 10 A• Derating - - -Siemens ST 70 N · 20105/59

SIMATIC S7-300Power supplies© Siemens AG 2010Power supplies■ Technical specifications (continued)Power supply, type 2 A 5 A 10 AOrder number 6ES7 307-1BA01-0AA0 6ES7 307-1EA01-0AA0 6ES7 307-1KA02-0AA0Dynamic overcurrent on• Power-up on short-circuit Typ. 9 A for 90 ms typ. 20 A for 100 ms typ. 38 A for 80 ms• Short-circuit during operation Typ. 9 A for 90 ms typ. 20 A for 100 ms typ. 38 A for 80 msParallel switching for enhanced performance Yes Yes YesEfficiencyEfficiency at V out rated , I out rated approx. 84 % approx. 87 % approx. 90 %Power loss at V out rated , I out rated approx. 9 W approx. 18 W approx. 27 WClosed-loop controlDynamic line smoothing (V in rated ±15 %) typ. ±0.1 % V out typ. ±0.1 % V out typ. ± 0.1 % V out5Dynamic load smoothing (I out : 50/100/50 %) typ. ±0.8 % V out typ. ±1 % V out typ. ± 2 % V outLoad-step settling time• 50 at 100 % < 1 ms (typ. 0.5 ms) typ. 0.3 ms < 0.1 ms• 100 at 50% < 1 ms (typ. 0.5 ms) typ. 0.3 ms < 0.1 msProtection and monitoringOutput overvoltage protectionAdditional control loop,shutdown at approx. 28.8 V,automatic restartAdditional control loop,shutdown at approx. 28.8 V,automatic restartAdditional control loop,shutdown at approx. 28.8 V,automatic restartCurrent limit 2.2 ... 2.6 A 5.5 ... 6.5 A 11 ... 12 AShort-circuit protectionElectronic shutdown, automaticrestartElectronic shutdown, automaticrestartElectronic shutdown, automaticrestartSustained-short-circuit-current rms value < 2 A < 7 A < 12 AOverload/short-circuit indicator - - -SafetyPrimary/secondary galvanic isolationYes, safety extra-low outputvoltage Vout to EN 60950-1 andEN 50178Yes, safety extra-low outputvoltage Vout to EN 60950-1 andEN 50178Yes, safety extra-low outputvoltage V out to EN 60950-1 andEN 50178Protection class Class I Class I Class ILeakage current < 3.5 mA (typ. 0.5 mA) < 3.5 mA (typ. 0.5 mA) < 3.5 mA (typ. 0.6 mA)Safety test Yes Notified body YesCE label Yes Yes YesUL/cUL (CSA) approvalcULus-listed (UL 508, CSAC22.2 No. 142), file E143289cULus-listed (UL 508, CSAC22.2 No. 142), file E143289cULus-listed (UL 508, CSAC22.2 No. 142), file E143289Explosion protectionFM approvalATEX 94/9/EC EX II 3G; EEx, nA,II, T4 UUL 1604 Class I Div. 2 Group A,B, C, DClass I Div. 2 Group A, B, C, DT4ATEX 94/9/EC EX II 3G; EEx, nA,II, T4 UUL 1604 Class I Div. 2 Group A,B, C, DClass I Div. 2 Group A, B, C, D, T4ATEX 94/9/EC EX II 3G; EEx, nA,II, T4 U;UL 1604 Class I Div. 2 Group A,B, C, DClass I Div. 2, Group A, B, C, D,T4Marine type approval in S7-300 system in S7-300 system in S7-300 systemDegree of protection (EN 60529) IP20 IP20 IP20EMCEmitted interference EN 55022 Class B EN 55022 Class B EN 55022 Class BSupply-harmonics limitation Not applicable EN 61000-3-2 EN 61000-3-2Noise immunity EN 61000-6-2 EN 61000-6-2 EN 61000-6-2Operating dataAmbient temperature range 0 ... +60 °Cwith natural convection0 ... +60 °Cwith natural convection0 ... +60 °Cwith natural convectionTransport/storage temperature range -40 ... +85 °C -40 ... +85 °C -40 ... +85 °CHumidity class Climate class 3K3 to EN 60721,no condensationClimate class 3K3 to EN 60721,no condensationClimate class 3K3 to EN 60721,no condensation5/60 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-300Power suppliesPower supplies■ Technical specifications (continued)Power supply, type 2 A 5 A 10 AOrder number 6ES7 307-1BA01-0AA0 6ES7 307-1EA01-0AA0 6ES7 307-1KA02-0AA0Mechanical systemPorts• Supply input L, N, PE(DC input: L+1, M1, PE)Solid/finely-stranded perscrew-type terminal for 0.5 mmto 2.5 mm 2Solid/finely-stranded perscrew-type terminal for 0.5 mmto 2.5 mm 2Solid/finely-stranded perscrew-type terminal for 0.5 mmto 2.5 mm 2• Output +2 screw-type terminals for0.5 mm to 2.5 mm 2 3 screw-type terminals for0.5 mm to 2.5 mm 2 4 screw-type terminals for0.5 mm to 2.5 mm 2• Output -2 screw-type terminals for0.5 mm to 2.5 mm 2 3 screw-type terminals for0.5 mm to 2.5 mm 2 4 screw-type terminals for0.5 mm to 2.5 mm 2Dimensions (W x H x D) in mm 40 x 125 x 120 60 x 125 x 120 80 x 125 x 120Weight, approx. 0.4 kg 0.6 kg 0.8 kgAssembly Can be mounted onto S7 rail Can be mounted onto S7 rail Can be mounted onto S7 railAccessoriesMounting adapter for DIN rail(6EP1 971-1BA00)Mounting adapter for DIN rail(6EP1 971-1BA00)Mounting adapter for DIN rail(6EP1 971-1BA00)5■ Ordering data Order No. Order No.PS 307 load power supplyInstallation adapter6EP1 971-1BA00incl. power connectorFor snapping the PS 307 onto a120/230 V AC / 24 V DC; 2 A 6ES7 307-1BA01-0AA035 mm DIN rail (EN 50022)120/230 V AC / 24 V DC; 5 A 6ES7 307-1EA01-0AA0120/230 V AC / 24 V DC; 10 A 6ES7 307-1KA02-0AA0■Siemens ST 70 N · 20105/61

SIMATIC S7-300© Siemens AG 201055/62 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-4006/2 SIPLUS central processing units6/2 SIPLUS CPU 417H6/3 SIPLUS sync module6/4 SIPLUS analog modules6/4 SIPLUS SM 431 analog input modulesBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

SIMATIC S7-400SIPLUS central processing units© Siemens AG 2010SIPLUS CPU 417H■ OverviewSIPLUS CPU 417-4HOrder No.Order No. based onAmbient conditionsTechnical data6AG1 417-4HT14-4AB06ES7 417-4HT14-0AB0Resistant in accordance with EN60721to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) activesubstances and compliant withISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmentalconditions of SIPLUS extreme(on this page) or go towww.siemens.com/siplus-extremeThe technical data of the standardproduct apply with the exception of theenvironmental conditions.1) ISA -S71.04 severity level GX from October 20106CPU for SIMATIC S7-400H and S7-400F/FH• For use in S7-400H fault-tolerant systems• Can be used with F-Runtime license as fail-safe CPU in safetyrelatedS7-400F/FH systems• With integral PROFIBUS DP master interface• With 2 plug-in slots for sync modulesFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuEnvironmental SIPLUS extremeconditionsAmbient temperature -40/-25 to +60 °CrangeRelative humidity 100%Dewing, condensation and icing permissibleContaminantconcentrationEN60721-3-3 3C4 and ISA S71.04 G1, G2,G3, GX 1) Constant load Limit value 2)■ Ordering dataOrder No.SIPLUS CPU 417-4H C 6AG1 417-4HT14-4AB0(Medial exposure)for S7-400H and S7-400F/FH;30 MB work memory,MPI/PROFIBUS DP master interface,2 slots for sync modules,slot for memory card, incl. slotnumber platesAccessoriessee S7-400 central processingunits, catalog ST 70 · 2009,page 5/46C: Subject to export regulations: AL: N and ECCN: EAR99HSO 2 4.8 ppm 17.8 ppmH 2 S 9.9 ppm 49.7 ppmCl 0.2 ppm 1.0 ppmHCl 0.66 ppm 3.3 ppmHF 0.12 ppm 2.4 ppmNH 49 ppm 247 ppmO 3 0.1 ppm 1.0 ppmNO x 5.2 ppm 10.4 ppmAt RH < 75%, condensation permittedSaline fog Saline fog test (EN 60068-2-52)Mechanically active EN60721-3-3 3S4substances• Dust4.0 mg/m 2 h(suspendedsubstance content)• Dust (precipitation) 40 mg/m 2 h incl. conductive sand/dust("Arizona dust")Biologically activesubstancesEN60721-3-3 3B2Mildew growth,Fungus, excluding fauna1) ISA -S71.04 severity level GX from October 20102) 30 min/day6/2 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC S7-400SIPLUS central processing unitsSIPLUS sync module■ OverviewSIPLUS sync module (up to 10 m)Order No.6AG1 960-1AA04-4XA0Order No. based on6ES7 960-1AA04-0XA0Ambient conditionsResistant in accordance with EN60721to chemically (-3C4), mechanically(-3S4) and biologically (-3B2) activesubstances and compliant withISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmentalconditions of SIPLUS extreme(on page 6/2) or go towww.siemens.com/siplus-extremeTechnical dataThe technical data of the standardproduct apply with the exception of theenvironmental conditions.1) ISA -S71.04 severity level GX from October 2010• For interfacing the two CPU 414-4H/417-4H devices in thesubunits of the S7-400H• Pluggable directly into the CPUFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdoku■ Ordering dataSIPLUS sync module(Medial exposure)for coupling the CPU 41xH forS7-400H/F/FH;2 modules required per CPU;for 6ES7 412-3HJ14-0AB0,6ES7 414-4HM14-0AB0 and6ES7 417-4HT14-0AB0;for patch cable, can be used forfiber-optic cables up to 10 m inlengthOrder No.6AG1 960-1AA04-4XA06Accessoriessee S7-400 sync module,catalog ST 70, page 5/56Siemens ST 70 N · 20106/3

SIMATIC S7-400SIPLUS analog modules© Siemens AG 2010SIPLUS SM 431 analog input modules■ Overview■ Ordering dataOrder No.SIPLUS SM 431analog input modules(Medial exposure)16 inputs, non-floating, 13 bit 6AG1 431-0HH00-4AB08 inputs, floating, 14 bit 6AG1 431-1KF20-4AY0Accesssoriessee analog input modulesSM 431, catalog ST 70 · 2009,page 5/786• Analog inputs for SIMATIC S7-400• Connecting voltage sensors and current sensors, thermoelements, resistors and resistance thermometers• Resolution 13 to 16 bitFor further technical documentation on SIPLUS, see:http://www.siemens.com/siplus-extreme/techdokuSIPLUS SM 431 analog input modulesOrder No.Order No. based onAmbient conditionsTechnical data6AG1 431-0HH00-4AB06ES7 431-0HH00-0AB06AG1 431-1KF20-4AY06ES7 431-1KF20-0AB0Resistant in accordance with EN60721 to chemically(-3C4), mechanically(-3S4) and biologically (-3B2) active substancesand compliant withISA S71.04 G1, G2, G3, GX 1) .For further information, refer to Environmentalconditions of SIPLUS extreme(on page 6/2) or go towww.siemens.com/siplus-extremeThe technical data of the standard productapply with the exception of the environmentalconditions.1) ISA -S71.04 severity level GX from October 2010■6/4 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Software7/2 Standard tools7/2 STEP 7 Basic7/4 STEP 77/7 STEP 7 Professional7/8 Engineering tools7/8 CFC7/9 SIMATIC iMap7/11 D7-SYS7/12 Drive ES engineering software7/13 S7 F Systems7/14 Version Cross Manager7/14 Version Trail7/15 SIMATIC PDM process device manager7/18 Runtime software7/18 Standard PID control7/19 Modular PID control7/22 PRODAVE MPI7/23 SIMATIC Maintenance Station7/25 Premium Studio7/26 Supplementary Components7/26 KNX/EIB2S7BrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

SIMATIC SoftwareStandard tools© Siemens AG 2010STEP 7 Basic■ OverviewSTEP 7 Basic, portal view■ BenefitsOptimized interaction of controller and HMI engineeringEfficient solving of complete automation task through:• Integrated handling of controller programming and HMI configurationin one engineering framework• Common data management• Integral WinCC Basic configuration environment;the application can be supplemented seamlessly by SIMATICHMI Basic Panels.Fast startup using the portal viewThe portal view facilitates navigation:• It is also possible for beginners to access each task rapidlyand specifically.• In the event of maintenance, fast access to the online viewsdirectly in the portal overview;previous downloading of a project is unnecessary.Intuitive user interfaceUse of STEP 7 Basic is extremely intuitive:• Editors matched to the tasks and sequence• Use of the latest Windows technologies7STEP 7 Basic, project viewThe STEP 7 Basic software is the engineering system for programmingthe SIMATIC S7-1200. The WinCC Basic engineeringsystem included in the package additionally allows configurationof SIMATIC HMI Basic Panels on the S7-1200.STEP 7 Basic thus provides support in all phases of the automationproject:• Configuring and parameterizing the hardware• Specifying the communication• Programming in LAD (Ladder Diagram) and FBD (FunctionBlock Diagram)• Configuration of the visualization• Test, commissioning, and service■ ApplicationSTEP 7 Basic is the engineering system for automation systemswith SIMATIC S7-1200. In addition to programming of the controller,it permits configuration of the connected SIMATIC HMIBasic Panels in association with the integral WinCC Basic. It isthus possible to use the full performance of these systems simplyand conveniently with just one tool.STEP 7 Basic can be used for:• Programming of the SIMATIC S7-1200 controller family:CPU 1211C, CPU 1212C, CPU 1214C• Configuration of the PROFINET-based SIMATIC HMI BasicPanels:KTP400 Basic, KTP600 Basic mono and KTP600 Basic color,KTP1000 Basic, TP1500 Basic;KTP400 Basic and KTP600 Basic can also be configured forupright mounting.7/2 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareStandard toolsSTEP 7 Basic■ Function■ Technical specificationsDevice & network configuration• Clear configuration of network and device functionalities inspecialized views of the editorLicensing formSoftware classSTEP 7 BasicSingle licenseA• Device viewCurrent version V10.5- photorealistic representation and configuration of the hardwaremodulesTarget system SIMATIC S7-1200- clipboard for modules;for simple intermediate storage of respective module parametersOperating system- catalog;includes all panels, CPUs, and modules with firmware versions• Network view- clear total view of all devices and network components used- intelligent drag&drop function for generation of connectionsController programmingMain memory size in programmingdevice/PC, min.1 GB• Powerful editors for programming the S7-1200 in LAD and Disk memory requirement in 2 GBFBPprogramming device/PC- comprehensive catalog of instructionsRemark- configurable favorites area for frequently used instructions- table-based editor for configuration of block interfaces- intellisense for support during selection of tags- simple reuse of instructions or networks within a project• Motion and technology functionalities- system support for integrated technology functions such as"Speed-controlled axis" and "Positioning axis"- PID controller with self-optimization (autotuning)■ Ordering dataSTEP 7 Basic V10.5Order No.Visualization• Powerful editors for configuration of Basic Panel functionalities- operating screens with touch/key operation and trend/vectorgraphics- bit and analog alarms- recipe management• Multi-language (up to 5 languages online)• Graphics library with off-the-shelf picture objects• Intelligent drag&drop for efficient configuration of standardfunctionalitiesIntegration• Integrated symbolic programming• Direct use of control variables in the HMI to avoid multiple inputs• Common cross-reference list for configuration objects (tags,blocks, etc.) for system-based project analysis or troubleshooting• Automatic generation of connections when using the controlvariables in the HMI• Global and local libraries for simple repeated use of preconfiguredelements• Intelligent drag&drop for importing and interconnecting datafrom different editorsTarget system:SIMATIC S7-1200, SIMATIC HMIBasic PanelsRequirement:Windows XP SP3,Vista Ultimate SP1,Vista Business SP1,Home Premium SP1Type of delivery:German, EnglishWindows XP Professional SP3(32 bit)Windows Vista Ultimate SP1(32 bit)Windows Vista Business SP1(32 bit)Windows Vista Home PremiumSP1 (32 bit)Includes the IEC programminglanguages LAD and FBPSTEP 7 Basic V10.5 on DVD D 6ES7 822-0AA00-0YA0Software Update Service D 6ES7 822-0AA00-0YL0(requires current softwareversion)Trial License STEP 7 BasicV10.5; on DVD, 14-day trialD 6ES7 822-0AA00-0YA7D: Subject to export regulations: AL: N and ECCN: 5D9927Online diagnostics• Clear representation of module diagnostics information• Monitoring tables with "Force" and "Control" facilities• Automatic display of all nodes accessible in the network• Detailed comparison between online and offline projectsSiemens ST 70 N · 20107/3

SIMATIC SoftwareStandard tools© Siemens AG 20107STEP 7■ Overview• STEP 7 basic software:The standard tool for the SIMATIC S7, SIMATIC C7 andSIMATIC WinAC automation systems.• Makes use of the full performance capabilities of the systems• User-friendly functions for all phases of an automation project:- Configuring and parameterizing the hardware- Definition of communication- Programming- Testing, commissioning and service- Documentation, archiving- Operating, diagnostics functionsComponents for connecting a PC to MPI and PROFIBUSThe components described below are used to connect programmingdevices and PCs (incl. notebooks) to PROFIBUS andto the multipoint SIMATIC S7 MPI interface in conjunction withSTEP 7.PC adapter USB• To connect a PC to the SIMATIC S7 programmable controllervia the USB port• Connectable to USB 1.1 and 2.0 ports• Applicable for SIMATIC S7-200, S7-300, S7-400 and C7• Supports routing• Automatic transmission rates and profile search• Noticeably improved performance (up to three times fasterthan the PC adapter via RS 232)• Including subsequently updatable firmware (e.g. for functionexpansions or troubleshooting)• Applicable in Windows 2000, Windows XP Home andWindows XP Professional• Scope of delivery:- PC adapter USB- CD "SIMATIC Software PC Adapter USB" including softwareand documentation- USB cable, 5 m- MPI cable, 0.3 mCP 5512• For programming devices/ PCs/notebooks with PCMCIA slot• PCMCIA slot Type II (32 bit cardbus)• Incl. adapter with 9-pin sub-D socket for connection toPROFIBUSCP 5611/CP 5611-MPI• For programming devices/PCs with PCI slot• Short PCI card (32 bit)• CP 5611-MPI including MPI cableComponents for connecting the PC to Industrial EthernetThe PC modules described below are used to connect programmingdevices and AT-compatible PCs/notebooks to IndustrialEthernet in conjunction with STEP 7 and SOFTNET-PG (as ofV6.0).CP 1512• For programming devices/ PCs/notebooks with PCMCIA slot• PCMCIA slot Type II (32 bit cardbus); 10/100 Mbit/s• Incl. adapter with RJ45 socket for connection to IndustrialEthernetCP 1612• For programming devices/PCs with PCI slot• Short PCI card (32 bit); 10/100 Mbit/s• Incl. RJ45 socket for connection to Industrial EthernetPlease refer to the respective product catalog for technical informationregarding product versions and supported operatingsystems.You will find additional information about the online connectionof PCs and SIMATIC S7/C7 controllers under“SIMATIC NET Communication Systems".7/4 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareStandard tools■ Technical specificationsSupply voltagesRated value• 24 V DCCurrent consumptionCurrent consumption, typ.Power consumptionPower consumption, typ.EMCInterference immunity againstdischarge of static electricity• Interference immunity againstdischarge of static electricity acc.to IEC 61000-4-2Interference immunity to cableborneinterference• on the supply lines acc. toIEC 61000-4-4• Interference immunity on signallines acc. to IEC 61000-4-4• on the supply lines acc. toIEC 61000-4-5• Interference immunity againsthigh-frequency radiation acc. toIEC 61000-4-3• Interference immunity againsthigh frequency current feed acc.to IEC 61000-4-6• Interference immunity to magneticfields at 50 Hz• Interference emission acc. toEN 55022, class B6ES7 972-0CB20-0XA0Yes100 mAmax. 2.5 WYes; 6 kV, contact discharge(to IEC 61000-4-2); 8 kV,air discharge (to IEC 61000-4-2)Yes; 2 kV (to IEC 61000-4-4, Burst)Yes; 1 kV (to IEC 61000-4-4; burst;length < 3 m);2 kV (to IEC 61000-4-4; burst;length > 3 m)Yes; 1 kV (to IEC 61000-4-5;surge symm.);2 kV (to IEC 61000-4-5;surge asymm.)Yes; 10 V/m, 80 to 1000 MHz(to IEC 61000-4-3);10 V/m, 900 MHz, 1.89 GHz,50% ED (to IEC 61000-4-3)Yes; 10 V, 9 kHz to 80 MHz(to IEC 61000-4-6)30 A/m; to IEC 61000-4-8YesSTEP 76ES7 972-0CB20-0XA0Environmental requirementsOperating temperature•Min. 5°C• max. 40 °C• permissible temperature change 10 °C/h; Operation: 10 K/h;storage/transport: 20 K/hStorage/transport temperature•Min. -20 °C• max. 60 °CRelative humidity• Operation, min. 5%• Operation, max.80 %; at 25 °C (no condensation)• Storage/transport, min. 5%• Storage/transport, max.95 %; at 25 °C (no condensation)Vibrations• Operation, checked according to Yes;IEC 60068-2-610 to 58 Hz:amplitude 0.075 mm;58 to 500 Hz:acceleration 9.8 m/s 2• Transport tested checked to Yes; (packed)IEC 60068-2-65 to 9 Hz, amplitude 3.5 mm;9 to 500 Hz, acceleration 9.8 m/s 2Shock test• Shock test Tested to DIN IEC 60068-2-2;Operation: 950 m/s 2 (10 g), 30 ms,100 Shocks;Transport (packaged): 250 m/s 2(25 g), 6 ms, 1000 shocksDimensions and weightDimensions• Width105 mm• Height58 mm•Depth26 mmWeight• Weight, approx.100 g7Siemens ST 70 N · 20107/5

SIMATIC SoftwareStandard tools© Siemens AG 2010STEP 77■ Ordering data Order No. Order No.STEP 7 Version 5.4STEP 7 reference manualsTarget system:SIMATIC S7-300/400,SIMATIC C7, SIMATIC WinACRequirements:Windows XP Prof., Vista Ultimate,Vista BusinessType of delivery:German, English, French,Spanish, Italian;incl. license key on USB stick,with electronic documentationFloating license on DVDRental license for 50 hoursSoftware Update Service on DVD(requires current softwareversion)Upgrade Floating License3.x/4.x/5.x to V5.4; on DVDTrial License STEP 7 V5.4;on DVD, 14 day trialSTEP 7 Version 5.4 JapaneseTarget system:SIMATIC S7-300/400,SIMATIC C7, SIMATIC WinACRequirements:Windows XP Professional JapaneseDelivery package:English, Japanese;incl. license key on USB stick,with electronic documentationFloating License Japanese onDVDUpgrade Floating License Japanese3.x/4.x/5.x to V5.4; on DVDSTEP 7 Version 5.4, ChineseTarget system:SIMATIC S7-300/400,SIMATIC C7, SIMATIC WinACRequirements:Windows XP ProfessionalChineseDelivery package:English, Chinese;incl. license key on USB stick,with electronic documentationFloating License Chinese on DVDUpgrade Floating License Chinese3.x/4.x/5.x to V5.4; on DVDDocumentation packageSTEP 7 basic informationComprising Getting Started,hardware configuration manual,programming manual, migrationmanualGermanEnglishFrenchSpanishItalian6ES7 810-4CC08-0YA56ES7 810-4CC08-0YA66ES7 810-4BC01-0YX26ES7 810-4CC08-0YE56ES7 810-4CC08-0YA76ES7 810-4CC08-0JA56ES7 810-4CC08-0JE56ES7 810-4CC08-0KA56ES7 810-4CC08-0KE56ES7 810-4CA08-8AW06ES7 810-4CA08-8BW06ES7 810-4CA08-8CW06ES7 810-4CA08-8DW06ES7 810-4CA08-8EW0A: Subject to export regulations: AL: N and ECCN: EAR99SC: Subject to export regulations: AL: N and ECCN: EAR99HConsisting of STL, LAD and FBDmanuals as well as a referencemanual for standard and systemfunctions for SIMATIC S7-300/400German6ES7 810-4CA08-8AW1English6ES7 810-4CA08-8BW1French6ES7 810-4CA08-8CW1Spanish6ES7 810-4CA08-8DW1Italian6ES7 810-4CA08-8EW1SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, fivelanguages:S7-200/300/400, C7, LOGO!,SIMATIC DP, PC, PG, STEP 7,engineering software, runtimesoftware, PCS 7, SIMATIC HMI,SIMATIC NETSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdatesEPROM programming device, 6ES7 792-0AA00-0XA0USB prommerFor programmingSIMATIC memory cards andEPROM modulesMPI cable6ES7 901-0BF00-0AA0For linking SIMATIC S7 and PGthrough MPI (5 m)Components for connectinga PC to MPI and PROFIBUSFor PCs with a free PCI slot:CP 56116GK1 561-1AA01CP 5611 MPI C 6GK1 561-1AM01incl. MPI cable (5 m)For PCs with a free PCMCIA slot:CP 55126GK1 551-2AA00For Windows XP ProfessionalFor PCs without a free PCI slot:PC adapter USB6ES7 972-0CB20-0XA0For connecting a PC to S7-300/-400/C7 through a USB interface;with USB cable (5 m)Components for connecting thePC to Industrial EthernetFor PCs with a free PCI slot:Layer 2 Ethernet cardsFor PCs with a free PCMCIA slot:SOFTNET-PG Edition 2006 6GK1 704-1PW64-3AA0D: Subject to export regulations: AL: N and ECCN: 5D9927/6 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareStandard toolsSTEP 7 Professional■ OverviewSTEP 7 Professional supports all IEC languages.In addition to the languages recognized by STEP 7•LAD•FBD•ILThe following are also available:• "Sequential Function Chart"• "Structured Text"An offline simulation of programs created with these languagesis included. STEP 7 Professional thus replaces the combinationof the individual packages STEP 7, S7-GRAPH, S7-SCL andS7-PLCSIM.A POWERPACK is offered to customers who use STEP 7 alreadyand wish to change. A valid STEP 7 license is required for purchasingthe POWERPACK. A separate update service is availablefor STEP 7 Professional .■ Ordering data Order No. Order No.STEP 7 ProfessionalEdition 2006Target system:SIMATIC S7-300/400,SIMATIC C7, SIMATIC WinACRequirements:Windows XP Prof., Vista Ultimate,Vista BusinessType of delivery:German, English, French,Spanish, Italian;license key on USB stick,with electronic documentationFloating license on DVDRental license for 50 hoursSoftware Update Service on DVD(requires current softwareversion)Upgrade of Floating License toEdition 2006; on DVDPowerpack Floating License forupgrading from STEP 7 toSTEP 7 ProfessionalTrial License STEP 7 ProfessionalEdition 2006;on DVD, runs for 14 daysDocumentation packageSTEP 7 basic informationComprising Getting Started,hardware configuration manual,programming manual, migrationmanualGermanEnglishFrenchSpanishItalian6ES7 810-5CC10-0YA56ES7 810-5CC10-0YA66ES7 810-5CC04-0YE26ES7 810-5CC10-0YE56ES7 810-5CC10-0YC56ES7 810-5CC10-0YA76ES7 810-4CA08-8AW06ES7 810-4CA08-8BW06ES7 810-4CA08-8CW06ES7 810-4CA08-8DW06ES7 810-4CA08-8EW0STEP 7 reference manualsConsisting of STL, LAD and FBDmanuals as well as a referencemanual for standard and systemfunctions for SIMATIC S7-300/400German6ES7 810-4CA08-8AW1English6ES7 810-4CA08-8BW1French6ES7 810-4CA08-8CW1Spanish6ES7 810-4CA08-8DW1Italian6ES7 810-4CA08-8EW1SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, fivelanguages: S7-200/300/400, C7,LOGO!, SIMATIC DP, PC, PG,STEP 7, engineering software,runtime software, PCS 7, SIMATICHMI, SIMATIC NETSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdatesEPROM programming device, 6ES7 792-0AA00-0XA0USB prommerFor programming SIMATIC memorycards and EPROM modulesMPI cable6ES7 901-0BF00-0AA0For linking SIMATIC S7 and PGthrough MPI (5 m)Components for connecting see STEP 7, page 7/6a PC to MPI and PROFIBUSComponents for connecting the see STEP 7, page 7/6PC to Industrial EthernetA: Subject to export regulations: AL: N and ECCN: EAR99S D: Subject to export regulations: AL: N and ECCN: 5D9927Siemens ST 70 N · 20107/7

SIMATIC SoftwareEngineering tools© Siemens AG 2010CFC7■ Overview• For creating automation programs by drawing a function chart• With extensive libraries of prefabricated function blocks towhich function blocks created by the user can be added• Reduced costs and fewer mistakes by simply interconnectingread-to-use function blocks• Optimized integration in the world of automation, for example,through guaranteed compatibility with all STEP 7 tools• Can be used for SIMATIC S7-300 (recommended for CPU 316or CPU 314C or higher), SIMATIC S7-400, SIMATIC WinACand D7-SYS■ Ordering dataSIMATIC CFC, Version 7.1Order No.Task:Graphic configuring and programmingof automation applicationsin the form of technologyorienteddiagramsTarget system:SIMATIC S7-300/400,SIMATIC WinAC, D7-SYSRequirements:STEP 7 from V5.3 onwardsDelivery form:Engineering software andelectronic documentation onCD-ROM, License Key on USBstick, Certificate of LicenseFloating license6ES7 658-1EX17-2YA5Floating license upgrade from 6ES7 658-1EX17-2YE5V7.0 to V7.1Software Update Service6ES7 658-1EX00-2YL8(requires current softwareversion)SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, fivelanguages:S7-200/300/400, C7, LOGO!,SIMATIC DP, PC, PG, STEP 7,engineering software, runtimesoftware, PCS 7, SIMATIC HMI,SIMATIC NETSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdatesA: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D9927/8 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareEngineering toolsSIMATIC iMap■ Overview• Component-based software tool for configuring the communicationin distributed automation solutions• For easy graphical configuration of the communication betweensubsystems and machine-to-machine communicationin the production line• Based on the PROFINET standard• Open for PROFINET devices from various manufacturers onIndustrial Ethernet• Runs under Windows 2000, Windows XP Professional andWindows 2003 Server■ Technical specificationsEngineering ToolSIMATIC iMapCurrent version V3.0Software classAApplicationsKeywordSIMATIC iMap is an engineeringtool for configuring communicationbetween automation and fielddevices in distributed automationsolutions.Marketing message"Time and cost savings in modularmachine and plant constructionwith Component basedAutomation.""Modularization and machine-tomachinecommunication alongthe production line."Advantages• Open component-based engineeringtool to the PROFINETstandard.• Simple communication betweenintelligent automation and fielddevices on PROFIBUS DP andon Ethernet.• Graphical configuration of communicationon PROFIBUS DPand on Ethernet• Extremely high reusability ofsoftware components (technologymodules)• Graphical structuring of theplant using "chart-in-chart" function• Convenient navigation throughthe project tree• Easy creation and structuring oftechnology libraries• PROFIBUS and Ethernet in theoverview of the network view• Fast start-up thanks to downloadingand testing directly onEthernet (also of PROFIBUSslaves)Engineering ToolAdvantages (continued)SIMATIC iMap• Online display of values of thetechnology modules on the interfacesand in the variable table• Diagnosis of communication inthe diagnostics window• Automotive industry (especiallyin assembly, conveyor systemsand in the paint shop)• Complex food and packagingmachines• Conveyor systems based onPROFIBUS DP• Production lines with several interlinkedmachines• SIMATIC S7 CPU 31x-2 PN/DPand SIMATIC S7CPU 319-3 PN/DP (withintegrated PROFINET interface.This can be used as a proxyfunction for the devices of acomplete PROFIBUS segment,one line only)• SIMATIC WinAC PN(can be used as a proxy functionfor the devices of a completePROFIBUS segment, one lineonly)• SIMATIC NET IE/PB Link(can be used as a proxy functionfor the devices of a completePROFIBUS segment)• SIMATIC NET CP 343-1 andCP 343-1 Advanced (for connectingSIMATIC S7-300 toEthernet),CP443-1 Advanced (forconnecting SIMATIC S7-400 toEthernet)SectorsTarget systems7Siemens ST 70 N · 20107/9

SIMATIC SoftwareEngineering tools© Siemens AG 2010SIMATIC iMap■ Technical specifications (continued) ■ Ordering data Order No.7Engineering ToolTarget systems (continued)System requirementsOperating systemPG/PC hardwareRecommended expansion of mainmemory in PG/PCHard disk space required in PG/PCSoftware requiredDelivery formatLanguagesSIMATIC iMap• Distributed I/O stations withseparate CPU(all intelligent field devices onPROFIBUS such asSIMATIC CPU 313C-2 DP,CPU 314C-2 DP,CPU 315-2 DP, CPU 316-2 DP,ET 200 IM 151 CPU,ET 200S BM 147 CPU),• PROFINET CBA OPC Server(for access from PC applicationsto data in PROFINET devices)• Devices on Industrial Ethernetbased on the PROFINET CBAstandard• SIMATIC OPs (within the components)• SIMATIC ProTool/Pro, WinCC orany other visualization systemwith OPC client functionWindows 2000 ProfesionalService Pack 4 and higher orWindows XP ProfessionalService Pack 1 and higher orWindows 2003 ServerService Pack 1 and higher;PC administration rights arerequired for installationPentium processor, 1 GHz orhigherRAM: 512 MB or moreApprox. 200 MB• STEP 7 V5.3 Service Pack 3 orhigher• PN OPC server V6.3 or higherThe following software must beinstalled before iMap (included inthe iMap package):• MS Internet Explorer V6.0Service Pack 1 and higher• Adobe Acrobat Reader V5.0English, German, French, Italianand SpanishYesSingle License (SL)Upgrade License (UL) Yes, from V2.0 to V3.0Paper manualsElectronically on CDAuthorization/licensesAuthorizationYesSingle License (SL)YesUpgrade License (UL)YesSoftware Update ServiceYesUnlock Copy LicenseNoSIMATIC iMap V3.0Target system:CPU 31x-2 PN/DP,CPU 319-3 PN/DP,SIMATIC WinAC PN,SIMATIC NET IE/PB Link,SIMATIC NET CP 343-1,SIMATIC NET CP 343-1Advanced,SIMATIC NET CP 443-1Advanced,distributed I/O devices with ownCPU,PROFINET CBA OPC server,devices on the Industrial Ethernetbased on the PROFINET CBAstandard,SIMATIC OPs,SIMATIC ProTool/ProRequirements:Windows 2000 Professionalwith Service Pack 4 or later orWindows XP Professionalwith Service Pack 1 or later orWindows 2003 Serverwith Service Pack 1 or later;on PG or PC with Pentiumprocessor, min. 1 GHz;STEP 7 V5.3 or later withService Pack 3,PN OPC Server V6.3 or laterDelivery form:German, English,with electronic documentationFloating License D 6ES7 820-0CC04-0YA5Software Update Service D 6ES7 820-0CC01-0YX2(requires current softwareversion)Upgrade to V3.0, floating license D 6ES7 820-0CC04-0YE5D: Subject to export regulations: AL: N and ECCN: 5D9927/10 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareEngineering toolsD7-SYS■ Overview• Add-on for STEP 7/CFC/SFC for configuration of control andautomation tasks with T400, FM 458, SIMADYN D orSIMATIC TDC• Contains function blocks for every application• Scope of delivery: Software packages D7-SYS, CFC, SFC,TH-PO• Optional:D7-FB-Gen, function block generator for the creation of customizedfunction blocks■ Ordering dataOrder No.SIMATIC D7-SYS V7.1Task:Function block library for configuringclosed-loop control andautomation tasksTarget system:SIMATIC S7-400/FM 458/SIMATIC TDC/T400/SIMADYNRequirement:Windows 2000/XPDelivery package:on CD, German, English, withelectronic documentationFloating license6ES7 852-0CC02-0YA5Upgrade License V5.x and higher 6ES7 852-0CC02-0YE5Software Update Service6ES7 852-0CC01-0YL5SIMATIC D7 FB Gen V2.1 A 6DD1 805-5DA0Function block generatorSIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, fivelanguages:S7-200/300/400, C7, LOGO!,SIMATIC DP, PC, PG, STEP 7,engineering software, runtimesoftware, PCS 7, SIMATIC HMI,SIMATIC NETSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdatesA: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D9927Siemens ST 70 N · 20107/11

SIMATIC SoftwareEngineering tools© Siemens AG 2010Drive ES engineering software7■ OverviewDrive ES is the engineering system used to integrate Siemensdrive technology into the SIMATIC automation world easily, efficientlyand cost-effectively in terms of communication, configurationand data management.It is based on the operator interface of the STEP 7 Manager, theessential element when it comes to engineering.Various software packages are available for selection.• Drive ES Basic -For entry into the world of Totally Integrated Automation andthe capability of routing beyond network boundaries and theuse of the SIMATIC teleservice.• Drive ES SIMATIC -to simply parameterize the STEP 7 communication programinstead of programming.• Drive ES PCS7 -integrates drives with PROFIBUS interface into theSIMATIC PCS7 process control system.■ Ordering dataDrive ES Basic V5.4 SPx *)• Configuration software for theintegration of drives into TotallyIntegrated Automation• Precondition: STEP 7, V5.3 andhigher, SP3• Supplied as: DVDde, en, fr, es, itwith electronic documentationFloating license, 1 userFloating license (copy license),60 usersUpdate service for single-userlicenseUpdate service for copy license,60 usersUpgrade from V5.x to V5.4 SPx *)Drive ES SIMATIC V5.4 SPx *)• Block library for SIMATIC forthe parameterization of communicationwith the drives• Precondition: STEP 7, V5.3 andhigher, SP3• Supplied as: CD-ROMde, en, fr, es, itwith electronic documentationSingle-user license incl.1x runtime licenseRuntime license(without data carrier)Update service for single-userlicenseUpgrade from V5.x to V5.4 SPx *)Drive ES PCS7 V6.1 SPx *)• Block library for PCS7 for theintegration of drives• Precondition: PCS7, V6.1 andhigher• Supplied as: CD-ROMde, en, fr, es, itwith electronic documentationSingle-user license incl.1x runtime licenseRuntime license(without data carrier)Update service for single-userlicenseUpgrade from V5.x to V6.1 SPx *)Drive ES PCS7 V7.0 SPx *)• Block library for PCS7 for theintegration of drives• Precondition: PCS7, V7.0 andhigher• Supplied as: CD-ROMde, en, fr, es, itwith electronic documentationSingle-user license incl.1x runtime licenseRuntime license(without data carrier)Update service for single-userlicenseUpgrade from V5.x to V7.0 SPx *)Order No.6SW1 700-5JA00-4AA06SW1 700-5JA00-4AA16SW1 700-0JA00-0AB26SW1 700-0JA00-1AB26SW1 700-5JA00-4AA46SW1 700-5JC00-4AA06SW1 700-5JC00-1AC06SW1 700-0JC00-0AB26SW1 700-5JC00-4AA46SW1 700-6JD00-1AA06SW1 700-5JD00-1AC06SW1 700-0JD00-0AB26SW1 700-6JD00-1AA46SW1 700-7JD00-0AA06SW1 700-5JD00-1AC06SW1 700-0JD00-0AB26SW1 700-7JD00-0AA4*) Orders are always automatically supplied with the latest SP.7/12 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareEngineering toolsS7 F Systems■ OverviewThe S7 F Systems engineering tool integrated in the SIMATICManager can be used to configure an S7 F/FH System. With thistool you can:• Parameterize CPU and F-signal modules• Create safety-related applications in the CFC.Predefined, TÜV-approved blocks are available for this purpose.The safety-related blocks save the user having to perform redundantprogramming for detecting and reacting to errors.■ Ordering dataS7 F Systems RT licenseFor processing safety-relatedapplication programs, for oneAS 412F/FH, AS 414F/FH orAS 417F/FHS7 F Systems V6.1Programming and configuringenvironment for creating andoperating safety-related STEP 7programs for an S7 400H-basedtarget system, floating license for1 user, executable underWindows XP Prof SP2/SP3,Windows Server 2003 SP22 languages (German, English)Type of supply:Certificate of license as well assoftware and electronic documentationon CDS7 F systems upgrade fromV5.x/V6.0 to V6.12 languages (German, English),floating license for 1 userType of supply:Certificate of license as well assoftware and electronic documentationon CDOrder No.6ES7 833-1CC00-6YX06ES7 833-1CC02-0YA56ES7 833-1CC02-0YE5Note:In the case of an S7 F Systems Upgrade from V5.x to V6.1, the type ofS7 F Systems license changes from single license to floating license.7Siemens ST 70 N · 20107/13

SIMATIC SoftwareEngineering tools© Siemens AG 2010Version Cross Manager■ Overview■ Ordering dataSIMATICVersion Cross Manager V7.16 languages (German, English,French, Italian, Spanish,Chinese), executes withWindows XP Professional orWindows Server 2003,floating license for 1 userType of delivery:License Key Memory Stick,Certificate of License incl. Termsand Conditions as well as TIAEngineering Toolset CDs V7.1Order No.6ES7 658-1CX17-2YA57The SIMATIC Version Cross Manager is a user-friendly tool fordetermining the differences between various versions of individualprojects or multi-projects by:• Tracing missing, additional or differing objects by comparinghardware configuration, communication, technological hierarchy,CFC/SFC charts, SFC details, block types, alarms, globalvariables, signals and run sequences• Graphic display of comparison results in a combination of treeand tabular formats• Clear hierarchical structuring according to the technologicalhierarchy of the plant• Color-coded identification of the differencesVersion Trail■ Overview■ Ordering dataOrder No.ProjectMulti projectVersioned project 1SIMATIC Version Trail V7.16 languages (German, English,French, Italian, Spanish,Chinese), executes withWindows XP Professional orWindows Server 2003,floating license for 1 user6ES7 658-1FX17-2YA5LibraryType of delivery: License KeyMemory Stick, Certificate ofLicense incl. Terms and Conditionsas well as TIA EngineeringToolset CDs V7.1Versioned project 2SIMATIC Version Trail is a software option for engineering which,together with the SIMATIC Logon central user administration,can assign a version history to libraries, projects and multiprojects.7/14 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareEngineering toolsSIMATIC PDM process device manager■ OverviewSIMATIC PCS 7 engineering stationwith SIMATIC PDMDevice onthe workbenchPlant busS7-400S7-400Stand-alonecomputerwith SIMATIC PDMSITRANS PPROFIBUS DP fieldbusUp to 12 Mbit/sHART protocolDP/PAlinkMICROMASTERET 200M(IM 153-2 withHART modules)SIMOCODEproET200iSPRS 232/RS 485HARTmultiplexerPROFIBUS PAHARTSITRANS PDSIII HARTSIPART PS2SITRANS PDS III PASITRANSTH400SITRANS LRSITRANS F MSIPART PS2Possible connection pointof a PG/PC with SIMATIC PDM(stand-alone operation)7Configuration options with SIMATIC PDMSIMATIC PDM (Process Device Manager) is a universal, vendorindependenttool for the configuration, parameterization, commissioning,diagnostics and servicing of intelligent field devices(sensors and actuators) and field components (remote I/Os,multiplexers, control-room devices, compact controllers), whichin the following sections will be referred to simply as devices.Using one software, SIMATIC PDM enables the processing ofmore than 1 300 devices from Siemens and over 120 vendorsworldwide on one homogeneous user interface. Parameters andfunctions for all supported devices are displayed in a consistentand uniform fashion independent of their communications interface.From the viewpoint of device integration, SIMATIC PDM is themost powerful open device manager available in the world.Devices which previously were not supported can be easily integratedin SIMATIC PDM at any time by importing their devicedescriptions (EDD). This provides security for your investmentand saves you investment costs, training expenses and consequentialcosts.SIMATIC PDM is integrated in the asset management ofSIMATIC PCS 7. The Process Device Manager provides widerinformation for all devices described by the Electronic DeviceDescription (EDD), e.g. detailed diagnostics information(vendor information, information on fault diagnostics andtroubleshooting, further documentation), modification logbook(audit trial), parameter information. It is possible to changedirectly to SIMATIC PDM from the diagnostics faceplates in themaintenance station.■ Technical specificationsHardware minimum requirements • PG/PC/notebook with processorcorresponding to operatingsystem requirements• Main memory 256 MB• Vacant hard disk 370 MBOperating systems (alternative) • Microsoft Windows 2000Professional SP3/SP4• Microsoft Windows XPProfessional SP2/SP3• Microsoft Windows Server 2003SP2 (only for operation with aSIMATIC PCS 7 EngineeringStation)Further software components• SIMATIC PDM option"Integration in STEP 7/PCS 7"STEP 7 V5.2 + SP1STEP 7 V5.3 + SP3STEP 7 V5.4 + SP4SIMATIC PCS 7 V6.1 + SP2/SP3SIMATIC PCS 7 V7.0 + SP2SIMATIC PCS 7 V7.1Siemens ST 70 N · 20107/15

SIMATIC SoftwareEngineering tools© Siemens AG 2010SIMATIC PDM process device manager■ Ordering data Order No. Order No.7Minimum configuration SIMATIC PDM Single PointSIMATIC PDM Single Point V6.0 6ES7 658-3HX06-0YA5for operation and parameterizationof one field device; communicationvia PROFIBUS DP/PA orHART modem, including 1 TAGcannot be expanded with respectto functions or with TAGoption/PowerPack6 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalFloating license for 1 userType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions;CDs with SIMATIC PDMV6.0 and device libraryPredefined SIMATIC PDM V6.0 product configurations for specialapplicationsSIMATIC PDM Service V6.0 6ES7 658-3JX06-0YA5Complete package for standaloneusers for servicing, with• SIMATIC PDM Basic V6.0• 128 TAGs6 languages (German, English,French, Italian, Spanish,Chinese), executes withWindows 2000 Professional orWindows XP Professional,floating license for 1 userType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions;CDs with SIMATIC PDMV6.0 and device librarySIMATIC PDM S7 V6.06ES7 658-3KX06-0YA5Complete package for use in aSIMATIC S7 configuration environment,with• SIMATIC PDM Basic V6.0• Integration in STEP 7 / PCS 7• 128 TAGs6 languages (German, English,French, Italian, Spanish,Chinese), executes withWindows 2000 Professional orWindows XP Professional,floating license for 1 userType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions;CDs with SIMATIC PDMV6.0 and device libraryComponents for individual configurationSIMATIC PDM Basic V6.0for operation and parameterizationof field devices and components,communication viaPROFIBUS DP/PA, HART(modem, RS 232, PROFIBUS)and Modbus, including 4 TAGs6 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions;CDs with SIMATIC PDMV6.0 and device library• Floating license for 1 user 6ES7 658-3AX06-0YA5• Rental license for 50 hours 6ES7 658-3AX06-0YA6Integration in STEP 7 /SIMATIC PCS 7Only required if integration ofSIMATIC PDM into HW-Config isto be used6 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions• Floating license for 1 user 6ES7 658-3BX06-2YB5Routing via S7-4006 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions• Floating license for 1 user 6ES7 658-3CX06-2YB5Communication via standardHART multiplexer6 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions• Floating license for 1 user 6ES7 658-3EX06-2YB57/16 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareEngineering toolsSIMATIC PDM process device manager■ Ordering data Order No. Order No.TAG options / PowerPacksSIMATIC PDM TAG optionfor TAG expansion, additive toSIMATIC PDM Basic V6.06 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalFloating license for 1 userType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions• Up to 128 TAGs• Up to 512 TAGs• Up to 1 024 TAGs• Up to 2 048 TAGsSIMATIC PDM PowerPackfor subsequent TAG expansion ofall SIMATIC PDM V6.0 productconfigurations6 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalFloating license for 1 userType of delivery:License Key Disk, Certificate ofLicense incl. Terms and Conditions• From 128 TAGs to 512 TAGs• From 512 TAGs to 1 024 TAGs• From 1 024 TAGs to 2 048 TAGs• From 2 048 TAGs to unlimitedTAGs6ES7 658-3XA06-2YB56ES7 658-3XB06-2YB56ES7 658-3XC06-2YB56ES7 658-3XD06-2YB56ES7 658-3XB06-2YD56ES7 658-3XC06-2YD56ES7 658-3XD06-2YD56ES7 658-3XH06-2YD5Demonstration softwareSIMATIC PDM Demo V6.0without online communicationand storage functionality6 languages (German, English,French, Spanish, Italian,Chinese), executes withWindows 2000 Professional orWindows XP ProfessionalType of delivery:CDs with SIMATIC PDM V6.0 anddevice library6ES7 658-3GX06-0YC87Siemens ST 70 N · 20107/17

SIMATIC SoftwareRuntime software© Siemens AG 2010Standard PID control■ Overview• For integrating continuous PID controllers, pulse controllersand step controllers in the application program• Reduces engineering costs thanks to time-saving parameterizationand optimization of the controller• For use in SIMATIC S7-300 (CPU 313 or higher), S7-400 andWinAC■ Technical specificationsData parameterization toolPrerequisitesSTEP 7 V5.3 SP2 or higher7Standard functionblocksPID_CP (FB 1) PID_ES (FB 2) LP_SCHED(FC 1)Storage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 8956 byte 7796 byte 9104 byte 7982 byte 1064 byte 976 byte• DB length in the memory 1168 byte 510 byte 1124 byte 484 byte 184 byte 2) 100 byte 2)Runtimes•In S7-300 1) 0.18 … 4.4 ms 0.2 … 5.1 ms 0.03 … 0.3 ms•In S7-400 1) 0.13 … 0.35 ms 0.16 … 0.35 ms 0.03 … 0.08 msPLC SIMATIC S7-300, S7-4001) Depending on the CPU 2) With 5 control loops■ Ordering data Order No. Order No.Standard PID Controlparameterization tool, V5.2 SP1Task:Parameterization tool for standardclosed-loop controlsRequirement:STEP 7, V5.3 SP2 or higherDelivery package:With electronic manual/GettingStarted English, German;incl. authorization disketteFloating licenseSoftware Update Service(requires current softwareversion)Upgrade license from V5.x toV5.2 SP16ES7 830-2AA22-0YX06ES7 830-2AA00-0YX26ES7 830-2AA22-0YX4Standard function blocks forStandard PID Control, V5.2Task: Standard FBs for standardclosed-loop controlsTarget system: SIMATIC S7-300(CPU 313 or higher), S7-400Type of delivery: With electronicmanual/Getting Started English,GermanSingle license6ES7 860-2AA21-0YX0Single license without software 6ES7 860-2AA21-0YX1and documentationSIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, fivelanguages: S7-200/300/400,WinAC, LOGO!, SIMATIC DP, PC,PG, STEP 7, engineering software,runtime software, PCS 7,SIMATIC HMI, SIMATIC NETSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdatesA: Subject to export regulations: AL: N and ECCN: EAR99S D: Subject to export regulations: AL: N and ECCN: 5D9927/18 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareRuntime softwareModular PID control■ Overview• For creating complex closed-loop control structures• Preferred for implementation in closed-loop control equipmentin mid-range and high-end applications and in process engineering• For use in SIMATIC S7-300 (CPU 313 or higher), S7-400 andWinAC■ Technical specificationsCommissioning softwarePrerequisitesSTEP 7 V5.3 SP2 and higherRAM expansion16 MBProcessor, at least 486Windows swap area, approx. 20 MB (max. possible)7Standard function blocks A_DEAD_B CRP_IN CRP_OUTStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 898 byte 692 byte 182 byte 70 byte 206 byte 96 byte• DB length in the memory 186 byte 44 byte 122 byte 20 byte 114 byte 14 byteRuntimes in S7-300 0.13 … 0.17 ms 0.06 ms 0.18 … 0.22 msRuntimes in S7-400 0.01 … 0.03 ms 0.01 … 0.02 m 0.01 … 0.04 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACStandard function blocks DEAD_T DEAD_BAND DIFStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 532 byte 394 byte 232 byte 120 byte 410 byte 268 byte• DB length in the memory 142 byte 22 byte 114 byte 16 byte 158 byte 30 byteRuntimes in S7-300 0.26 … 0.33 ms 0.16 … 0.21 ms 0.55 … 0.71 msRuntimes in S7-400 0.02 … 0.06 m 0.01 … 0.03 ms 0.03 … 0.09 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACStandard function blocks ERR_MON INTEG LAG1STStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 558 byte 360 byte 488 byte 314 byte 534 byte 368 byte• DB length in the memory 206 byte 52 byte 168 byte 36 byte 156 byte 30 byteRuntimes in S7-300 0.27 … 0.35 ms 0.40 … 0.51 ms 0.52 … 0.67 msRuntimes in S7-400 0.01 … 0.05 ms 0.02 … 0.07 ms 0.03 … 0.09 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSiemens ST 70 N · 20107/19

SIMATIC SoftwareRuntime software© Siemens AG 2010Modular PID control■ Technical specifications (continued)Standard function blocks LAG2ND LIMALARM LIMITERStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 690 byte 516 byte 390 byte 240 byte 262 byte 140 byte• DB length in the memory 190 byte 46 byte 152 byte 28 byte 124 byte 20 byteRuntimes in S7-300 0.88 … 1.14 ms 0.47 … 0.61 ms 0.14 … 0.17 msRuntimes in S7-400 0.04 … 0.16 ms 0.02 … 0.07 ms 0.03 … 0.01 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACStandard function blocks LMNGEN_C LMNGEN_S NONLINStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 1576 byte 1280 byte 2578 byte 2152 byte 826 byte 672 byte• DB length in the memory 276 byte 80 byte 360 byte 110 byte 138 byte 18 byteRuntimes in S7-300 0.32 … 0.41 ms 1.16 … 1.47 ms 0.32 … 0.41 msRuntimes in S7-400 0.02 … 0.06 ms 0.06 … 0.18 ms 0.02 … 0.07 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinAC7Standard function blocks NORM OVERRIDE PARA_CTLStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 234 byte 122 byte 362 byte 214 byte 406 byte 232 byte• DB length in the memory 130 byte 24 byte 146 byte 28 byte 234 byte 82 byteRuntimes in S7-300 0.33 … 0.43 ms 0.15 … 0.18 ms 0.12 … 0.15 msRuntimes in S7-400 0.02 … 0.07 ms 0.01 … 0.04 ms 0.01 … 0.03 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACStandard function blocks PID PULSEGEN RMP_SOAKStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 1560 byte 1242 byte 1110 byte 872 byte 1706 byte 1500 byte• DB length in the memory 340 byte 98 byte 190 byte 34 byte 212 byte 62 byteRuntimes in S7-300 1.15 … 1.46 ms 0.17 … 0.20 ms 0.16 … 0.20 msRuntimes in S7-400 0.06 … 0.18 ms 0.01 … 0.05 ms 0.01 … 0.04 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACStandard function blocks ROC_LIM SCALE SP_GENStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 1242 byte 980 byte 136 byte 32 byte 658 byte 484 byte• DB length in the memory 222 byte 50 byte 114 byte 16 byte 164 byte 40 byteRuntimes in S7-300 0.53 … 0.68 ms 0.10 … 0.13 ms 0.27 … 0.35 msRuntimes in S7-400 0.02 … 0.09 ms 0.01 … 0.02 ms 0.02 … 0.06 msPLCSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinAC7/20 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareRuntime softwareModular PID control■ Technical specifications (continued)Standard function blocks SPLT_RAN SWITCH LP_SCHEDStorage space requirements Load memory Work memory Load memory Work memory Load memory Work memory• FB length in the memory 304 byte 180 byte 238 byte 116 byte 1104 byte 972 byte 1)• DB length in the memory 138 byte 28 byte 118 byte 18 byte 234 byte 64 byte 1)Runtimes in S7-300 0.09 … 0.11 ms 0.07 … 0.09 ms 0.28 … 0.34 msRuntimes in S7-400 0.01 … 0.02 ms 0.01 … 0.03 ms 0.03 … 0.08 msPLC1) With 5 control loopsSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinACSIMATIC S7-300 (CPU 313 andhigher), S7-400, WinAC■ Ordering data Order No. Order No.Modular PID Controlcommissioning tool, V5.1 SP1for SIMATIC S7 and WinACTask:Start-up tool for modular PIDcontrollersRequirement:STEP 7, V5.3 SP2 or higherDelivery package:With electronic manual, English,German;incl. authorization disketteFloating licenseSoftware Update Service(requires current softwareversion)Upgrade license from V5.0 toV5.1 SP1Standard function blocks forModular PID Control, V5.1Task:Standard FBs for modular PIDcontrollersTarget system:SIMATIC S7-300 (CPU 313 orhigher), S7-400, WinACType of delivery:English, German;with electronic manualSingle licenseSingle license, without softwareand documentation6ES7 830-1AA11-0YX06ES7 830-1AA00-0YX26ES7 830-1AA11-0YX46ES7 860-1AA10-0YX06ES7 860-1AA10-0YX1SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, fivelanguages:S7-200/300/400, WinAC, LOGO!,SIMATIC DP, PC, PG, STEP 7,engineering software, runtimesoftware, PCS 7, SIMATIC HMI,SIMATIC NETSIMATIC Manual Collection D 6ES7 998-8XC01-8YE2update service for 1 yearCurrent "Manual Collection" DVDand the three subsequentupdates7A: Subject to export regulations: AL: N and ECCN: EAR99S D: Subject to export regulations: AL: N and ECCN: 5D992Siemens ST 70 N · 20107/21

SIMATIC SoftwareRuntime software© Siemens AG 2010PRODAVE MPI■ Overview■ Ordering dataOrder No.PRODAVE MPI/IE V6.1 forWindows 95/98/ME/NT 4.0/2000 Prof./XP Prof.PG/PCReading, writingand processingdataTask:Data link between PG/PC andSIMATIC S7/C7 via MPI(S7-200 via PPI) or IndustrialEthernetRequirements:Windows 2000 Prof./XP Prof./Vista 32 Ultimate;CP 5611, integrated MPI orPC adapterDelivery package:CD incl. electr. documentation(German, English)PRODAVE MPISingle license A 6ES7 807-4BA02-0YA0Copy license, without software A 6ES7 807-4BA02-0YA1and documentation7• The toolbox for exchange of process data betweenSIMATIC S7, SIMATIC M7, SIMATIC C7 and a PG/PC• For autonomous handling of data traffic over MPI/PPI,PROFIBUS and Industrial EthernetG_ST70_XX_00130PRODAVE MPI Mini V6.0 forWindows 95/98/ME/NT 4.0/2000 Prof./XP Prof.Task:Data link between PG/PC andSIMATIC S7/C7 over MPI (S7-200over PPI); with reduced functionalscope)Requirements:Windows 95/98/ME/NT 4.0/2000 Prof./XP Prof.; CP 5611,integrated MPI or PC adapterDelivery package:CD incl. electr. documentation(German, English)Single license A 6ES7 807-3BA01-0YA0Copy license, without softwareand documentationA6ES7 807-3BA01-0YA1SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD,five languages:S7-200/300/400, C7, LOGO!,SIMATIC DP, PC, PG, STEP 7,engineering software, runtimesoftware, PCS 7, SIMATIC HMI,SIMATIC NETSIMATIC Manual Collectionupdate service for 1 yearD6ES7 998-8XC01-8YE2Current "Manual Collection" DVDand the three subsequentupdatesA: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D9927/22 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwareSIMATIC Maintenance StationSIMATIC Maintenance Station■ OverviewSystem-integrated plant asset management system• Automatic generation of a maintenance view in WinCC fromthe STEP 7 hardware configuration• Plant-wide visualization of all automation components from themanagement level to the field level in ready linked, hierarchicallyarranged WinCC displays• Mapping of central and distributed SIMATIC S7 components,PROFIBUS and PROFINET networks as well as associatedbus nodes• Ethernet network components and industrial PCs can be integratedthrough SIMATIC NET SNMP OPC Server• Display of device status with group status generation in overviewand detail displays• The device statuses "Maintenance required" and "Maintenancerequest" are supported for status-based maintenance• Provision of uniform faceplates showing detailed informationfor all components displayed• Display of the device identification data (electronic ratingplate)• Integrated display of the status of the request■ Technical specificationsHardware requirementsSystem Clock frequency Main memory Free hard disk spaceEngineering station 2.8 GHz 1 GB 15 GBMaintenance Station Stand-alone / 2.8 GHz 1 GB 15 GBWinCC-Station "Single-userWorkstation"Maintenance Station Server / 2.8 GHz 1 GB 15 GBWinCC ServerMaintenance Station Client / 2.8 GHz 512 MB 3 GBWinCC Client7Software requirementsSystemOperating systemSystemOperating systemEngineering station "ES"Windows XP Professional SP2Windows Server 2003 SP1Maintenance Station Server /WinCC ServerWindows Server 2003 SP1Maintenance Station Stand-alone /WinCC-Station "Single-user Workstation"Windows XP Professional SP2Windows Server 2003 SP1Maintenance Station Client /WinCC ClientWindows XP Professional SP2Windows Server 2003 SP1ES with Maintenance Station StandaloneWindows XP Professional SP2Windows Server 2003 SP1Requirements for the integration of devicesType Integration CommentSIMATIC S7 controllers / I/O• S7-300 1)Yes• S7-400Yes•WinACYesDistributed devices• ET 200 Yes PROFIBUS DP and PROFINET IO according toSTEP 7 hardware catalog• PROFIBUS standard slaves Yes Integration using a GSD file• PROFINET standard devices Yes Integration using a GSD file1) With S7-300, PROFIBUS/PROFINET systems are supported if they areconnected to the internal CPU interfacesSiemens ST 70 N · 20107/23

SIMATIC SoftwareSIMATIC Maintenance Station© Siemens AG 2010SIMATIC Maintenance Station■ Technical specifications (continued)Requirements for the integration of devices (continued)Type Integration CommentNetwork componentsEthernet network components Yes SIMATIC NET SNMP OPC Server and MIB alsorequiredPROFINET network componentsYesPROFIBUS diagnostic repeaterYesPersonal ComputerPC/Industrial PC Yes SIMATIC NET SNMP OPC Server also requiredDrivesDrives with PROFIBUS connection Yes For integrating devices designed to thePROFIDRIVE profile, Drive ES SIMATIC(V5.4 SP1 or higher) is requiredDrives with PROFINET connection Yes For integrating devices designed to thePROFIDRIVE profile, Drive ES SIMATIC(V5.4 SP1 or higher) is requiredAccessory devicesDevices not configured in STEP 7 HardwareConfigYesIntegrated via function block (asset proxy)7■ Ordering data Order No. Order No.SIMATIC Maintenance Station2007Software for implementation of aplant-oriented asset managementsystemCan be used with STEP 7 V5.4 orhigher and WinCC V6.2• Basic packageD 6ES7 840-0WD00-0YA0with engineering software(Floating License) and RuntimeLicense for 100 devices• Powerpack 100D 6ES7 840-0WD10-0YD0Runtime Licensefor 100 additional devices• Powerpack 500D 6ES7 840-0WD20-0YD0Runtime Licensefor 500 additional devices• Powerpack 1000D 6ES7 840-0WD30-0YD0Runtime Licensefor 1000 additional devices• Basic demo package 2007 D 6ES7 840-0WD00-0YA7SIMATIC Maintenance Station2009Can be used with STEP 7 V5.4 orhigher and WinCC V7• Basic packageD 6ES7 840-0WD01-0YA0with engineering software(Floating License) and RuntimeLicense for 100 devices• Powerpack 100D 6ES7 840-0WD11-0YD0Runtime Licensefor 100 additional devices• Powerpack 500D 6ES7 840-0WD21-0YD0Runtime Licensefor 500 additional devices• Powerpack 1000D 6ES7 840-0WD31-0YD0Runtime Licensefor 1000 additional devices• Basic demo package 2009 D 6ES7 840-0WD01-0YA7• Upgrade from SIMATICMaintenance Station 2007 toSIMATIC Maintenance Station2009D 6ES7 840-0WD01-0YE0D: Subject to export regulations: AL: N and ECCN: 5D9927/24 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC SoftwarePremium StudioPremium Studio■ Overview• Contains the most important engineering and runtimesoftware packages for SIMATIC S7/C7, SIMATIC HMI,SIMATIC NET, SINUMERIK, SIRIUS and SIMATIC RFID onseveral data carriers (DVD)• Permits the simultaneous, automatic installation of severalsoftware packages• Permits the automatic updating of installed software packages• Considerably reduces installation costs• Optimal for company-wide rollout of identical engineeringsoftware versions using recording files of the master installation• Supports company-wide rollout with simple installationoptions over the network• General settings such as languages to be installed, installationpath, etc. can be made using the Premium Studio SetupNote:The Premium Studio does not contain any licenses. These mustbe ordered separately, either by means of existing licenses forthe corresponding version or by the separate ordering of newlicenses.■ Ordering dataOrder No.Premium Studio 2009 A 6ES7 815-8CD08-0YA7Task:Installation/updating of softwarepackages for Engineering andRuntime for SIMATIC S7/C7,SIMATIC HMI, SIMATIC NET,SINUMERIK, SIRIUS, andSIMATIC RFID;without licenses;Target system:Windows XP Professional SP2,Windows Vista Business,Windows Vista UltimateRequirements:PG/PC, PCU, S7-300/-400, C7Type of delivery:on DVD; without licenses for thesoftware packages (trial licensesare included for many softwareproducts)A: Subject to export regulations: AL: N and ECCN: EAR99S7Siemens ST 70 N · 20107/25

SIMATIC SoftwareSupplementary Components© Siemens AG 2010KNX/EIB2S7■ Overview■ Ordering dataKNX/EIB2S7 program package ATask:Software for connecting KNX/EIBbuilding technology componentsto SIMATIC S7;package includes:Editor, function blocks forSIMATIC S7, samples, documentationon C; license for editor onUSB flash memoryOrder No.6AV6 643-7AC10-0AA1A: Subject to export regulations: AL: N and ECCN: EAR99S7• Software for SIMATIC S7 communication with components ofa building automation unit• For use of industry automation components in building automation• Allows the integration of actuators/sensors on a KNX/EIB busin automation solutions with SIMATIC S7• For the use of information from building automation for theautomation of a production plant■7/26 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devices8/2 Programming devices8/2 Field PG M28/5 Communications software8/5 SOFTNET for PROFIBUS8/7 S7-REDCONNECT8/8 SOFTNET for Industrial Ethernet8/9 SOFTNET PN IO8/11 OPC server for Industrial Ethernet8/13 PN CBA OPC server8/15 SNMP OPC serverBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

SIMATIC Programming devicesProgramming devicesField PG M2© Siemens AG 2010■ Overview• The mobile, industrial programming device with powerful IntelCore 2 Duo processor.• Optimal for startup, service and maintenance of automationsystems.• Industrial notebook with wireless technology, large display,long battery service life, high-speed RAM, and integral databackup concept.• With all commonly used interfaces for industrial applications.8■ Technical specificationsGeneral featuresDesignProcessorMain memoryFree slots for expansionsGraphicsDisplayLoudspeakersPointing deviceOperating systemPower supplyWarranty conditionsDrivesHard diskSIMATIC Field PG M2DVD/CDDisk drive 1.44 MB; 3.5"InterfacesPROFIBUS DP/MPINotebookIntel Core 2 Duo processorwith 2.0 GHz or 2.2 GHz,800 MHz FSB;Intel Mobile GM 965 Expresschipset1 x 2 GB DDR 2 RAMwith 667 MHz1 x PC card type I/II and1 x ExpressCard/54Intel GME 965 with Dual View(e.g. desktop via 2 screens)15" display;resolution SXGA+ (1400 x 1050)Built-in stereo loudspeakersTouch padWindows XP Prof. SP3 Engl. MUI(Eng, Ger, Fr, Sp, It; additionallanguages can be installed later)orWindows VISTA Ultimate SP1Engl. 32-bitWide-range power supply unit100 … 240 V AC, 50 … 60 Hz,high-power lithium-ion battery73 Wh (running time 3.5 to4 hours)24 months for hardware components(6 months for battery 1 )3.5" serial ATA with 120 GB or250 GB; easily replaceableMultistandard DVD RW/CD RWCP 5611-compatible, 9.6 Kbit/s to12 Mbit/s, 9-pin Sub-D socketCOM 1Programming interfaceEthernetUSB 2.0PC card (PCMCIA)/ExpressCard/54VGAParallel (LPT)WLAN 2)ModemHeadphonesMicrophoneEnvironmental conditionsDegree of protection inaccordance with IEC 60529SIMATIC Field PG M2V.24/TTY (for SIMATIC S5);over supplied adapter on 9-pinSub-D male connectorFor memory cards, micro memorycards and S5 EPROM modules(over supplied adapter)10/100/1000 Mbit/sGigabit Ethernet (RJ45)2 x 2 interfaces for high speeduniversal serial bus, max. 2 highcurrent (500 mA) – 1 interface canbe used as high current in eachinterface block1 x type I/II and1 x Express Card/541 x (for connecting an externalmonitor)ECPIntegrated, IEEE802.11 a,b,gAnalog, V.92 compatible1 x (stereo)1 x (stereo)Front IP30 when covers closed1) The capacity of the battery decreases for technological reasons witheach charging/discharging operation and also as the result of beingstored at excessively high or low temperatures. The running time percharge therefore decreases in the course of time. In normal use thebattery can be charged and discharged over a period of six monthsfrom when the field PG is purchased.Capacity loss is not covered by the warranty. For the battery’s operationwe grant a warranty of six months. We recommend replacing thebattery with an original Siemens battery at the end of these six monthsif there is a significant drop in performance.2) The integral wireless LAN and modem are approved for operation inEurope. For operation in the U.S.A. and China there is a WLAN modulewith UL, FCC and CCC approvals. It can be ordered via the selectiontool.For operation outside these countries, the relevant national regulationsmust be observed.8/2 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesProgramming devicesField PG M2■ Technical specifications (continued)SIMATIC Field PG M2VibrationsTested in accordance withDIN IEC 60068-2-6•Operation10 … 58 Hz: Amplitude 0.0375 mm,58 … 500 Hz:Acceleration 4.9 m/s 2• Transport5 … 9 Hz: Amplitude 3.5 mm;9 … 500 Hz:Acceleration 9.8 m/s 2ShockTested in accordance withIEC 60068-2-27, IEC 60068-2-29•OperationHalf-sine 50 m/s 2 , 30 ms,100 shocks• Storage/transportHalf-sine 250 m/s 2 , 6 ms,1000 shocksElectromagnetic compatibility(EMC)• Interference emission EN 55022 Class B, EN 61000-3-2Class D and EN 61000-3-3• Immunity to line-conducted interferenceon the supply cables• Interference immunity on signallines• Immunity to electrostaticdischarges± 2 kV (in acc. with IEC61000-4-4;burst)± 1 kV (in acc. with IEC 61000-4-5;surge pulse symm.)± 2 kV (in acc. with IEC 61000-4-5;surge pulse asymm.)± 2 kV (in acc. with IEC 61000-4-4;burst; length > 3 m)± 2 kV (in acc. with IEC 61000-4-5;surge pulse length > 20 m)± 4 kV discharge on contact(in acc. with IEC 61000-4-2: ESD)± 8 kV discharge to air(in acc. with IEC 61000-4-2: ESD)Electromagnetic compatibility(EMC)• Immunity to high-frequencyirradiation• Immunity to high-frequencyemissions• Immunity to magnetic fieldsTemperatureSIMATIC Field PG M210 V/m; 80 to 1000 MHz and1.4 GHz to 2 GHz;80 % AM (in accordance withIEC 61000-4-3)10 V; 10 kHz to 80 MHz100 A/m; 50/60 Hz in accordancewith IEC 61000-4-8Tested in accordance withIEC 60068-2-2, IEC 60068-2-1•Operation 3) +5 … +40 ºC• Storage/transport -20 … +60 ºC• Gradient, max.20 ºC/h (no condensation)Relative humidityTested in accordance withIEC 60068-2-78, IEC 60068-2-30,IEC 60068-2-14•Operation 5 % … 80 % at 25 °C(no condensation)• Storage/transport 5 % … 95 % at 25 °C(no condensation)Dimensions and weightsDimensions (W x H x D) in mm 328 x 294 x 52Weight, approx.3.9 kg3) Battery charging and CD/DVD writing is only possible at temperaturesup to 35 ºC.8■ Ordering data Order No. Order No.SIMATIC Field PG M2programming deviceField PG M2 Standard:D 6ES7713-0AA0 7 - 0 7 7 42.0 GHz Core 2 Duo processor(T7250, 800 MHz, 2ML L2c),Multi Standard DVD-RW drive,15" SXGA+ display (1400x1050),120 GB serial ATA hard disk,1x2GB DDR2 RAMField PG M2 Premium:D 6ES7713-1BB1 7 - 0 7 7 42.2 GHz Core 2 Duo processor(T7500, 800 MHz, 4MB L2c),Multi Standard DVD-RW drive,15" SXGA+ display (1400x1050),250 GB serial ATA hard disk,1x2GB DDR2 RAMPower cable (required)• for Germany, France,0the Netherlands, Spain,Belgium, Austria, Sweden,Finland;Keyboard: International(& German);WLAN module with CE• For Great Britain;Keyboard: International(& German);WLAN module with CE1D: Subject to export regulations: AL: N and ECCN: 5D992SIMATIC Field PG M2programming deviceField PG M2 Standard D 6ES7713-0AA0 7 - 0 7 7 4Field PG M2 Premium D 6ES7713-1BB1 7 - 0 7 7 4Power cable (required)• For Switzerland;2Keyboard: International(& German);WLAN module with CE• for the U.S.A., Japan;3Keyboard: International(& German);WLAN module with UL, FCC,CCC (no CE)• For Italy;4Keyboard: International(& German);WLAN module with CE• for Germany, France,the Netherlands, Spain,Belgium, Austria, Sweden,Finland;keyboard: French (AZERTY)5with country-specific labeling forFrance, Belgium, Switzerland;WLAN module with CESiemens ST 70 N · 20108/3

SIMATIC Programming devicesProgramming devicesField PG M2© Siemens AG 20108■ Ordering data Order No. Order No.SIMATIC Field PG M2Accessoriesprogramming deviceMemory expansionField PG M2 Standard D 6ES7713-0AA0 7 - 0 7 7 41 GB DDR 2 RAM 667 MHz C 6ES7 648-2AG40-0HA0Field PG M2 Premium D 6ES7713-1BB1 7 - 0 7 7 42 GB DDR 2 RAM 667 MHz C 6ES7 648-2AG50-0HA0Power cable (required)USB mouse (PS/2-compatible) C 6ES7 790-0AA01-0XA0• For Switzerland;6Keyboard: French (AZERTY)AC/DC external power supplywith country-specific labeling forunit6ES7 798-0GA00-0XA0France, Belgium, Switzerland;WLAN module with CEPower cord (length 3 m)• For China;Keyboard: International(& German);WLAN module with UL, FCC andCCC (no CE!)Operating system• Windows XP Professional SP3English MUI(Fr., Span., Ital., Ger.;image stored on HD, otherlanguage packages availablefor downloading)• Windows VISTA Ultimate SP1Engl. 32-bit (Fr., Span., Ital.,Ger.; image stored on HD,other language packagesavailable for downloading.(Note:STEP 5 is not pre-installed and isincluded. STEP 5 is not executableunder Windows VISTA.)Licenses for theSIMATIC software• Trial license forSTEP 7 Professional,WinCC flexible Advanced;without programming cable• Upgrade licenseSTEP 7 Professional, STEP 5,WinCC flexible Advanced(requires license forSTEP 7 Prof./STEP 5 (at leastV3.0)); incl. MPI cable• Powerpack licenseSTEP 7 Professional,upgrade license STEP 5 andWinCC flexible Advanced(requires license forSTEP 7/STEP 5 (at least V3.0));incl. MPI cable• License STEP 7 Professional,STEP 5, STEP 7 Micro/WIN,WinCC flexible Advanced;incl. MPI cable, S5 online cable,and S5 EPROM programmingadapter• License for STEP 7,STEP 7 Micro/WIN,WinCC flexible Advanced;incl. MPI cable• License for STEP 7 Professional,STEP 5, STEP 7 Micro/WIN,WinCC flexible Advanced;incl. MPI cable7ABABCDEFfor Germany, France,the Netherlands, Spain, Belgium,Austria, Sweden, Finland6ES7 900-5AA00-0XA0For Great Britain6ES7 900-5BA00-0XA0For Switzerland6ES7 900-5CA00-0XA0For U.S.A.6ES7 900-5DA00-0XA0For Italy6ES7 900-5EA00-0XA0for China6ES7 900-5FA00-0XA0Spare battery6ES7 798-0AA05-0XA0(lithium ion, 6.6 Ah) 1)MPI cable6ES7 901-0BF00-0AA0for connecting a PG andSIMATIC S7 via MPI; 5 mS5 EPROM programming6ES7 798-0CA00-0XA0adapterfor SIMATIC S5 EPROMprogramming using the Field PGS5 PLC cable6ES5 734-2BF00For connecting programmingdevices to SIMATIC S5 PLCs, 5 mHard disk kit C 6ES7 791-2BA00-0AA0Replaceable hard disk 200 GBserial ATA;with protective pocket and TorxscrewdriverAdapter serial ATA to USB C 6ES7 790-1AA00-0AA0For using the replaceable harddisk of the hard disk kit as anexternal hard disk (only forField PG M2 or Field PG M)Rucksack for Field PG6ES7 798-0DA00-0XA01) The capacity of the battery decreases for technological reasons witheach charging/discharging operation and also as the result of beingstored at excessively high or low temperatures. The running time percharge decreases therefore in the course of time. In normal use thebattery can be charged and discharged over a period of six monthsfrom when the field PG is purchased.Capacity loss is not covered by the warranty. For the battery’s operationwe grant a warranty of six months. We recommend replacing thebattery with an original Siemens battery at the end of these six monthsif there is a significant drop in performance.C: Subject to export regulations: AL: N and ECCN: EAR99HD: Subject to export regulations: AL: N and ECCN: 5D9928/4 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesCommunications softwareSOFTNET for PROFIBUS■ Overview■ Technical specificationsPerformance data CP 5611 A2/CP 5621/CP 5512Mono protocol modeNumber of connectable DP slaves max. 60Number of FDL tasks waiting max. 100Number of PG/OP and S7 connections max. 8• DP-MasterDP-V0, DP-V1 withSOFTNET-DP• DP-SlaveDP-V0, DP-V1 withSOFTNET-DP slave• Software for coupling PCs/programming devices and notebooksto programmable controllers• Communication services:- PROFIBUS DP master Class 1 and 2 with acyclic expansions- PROFIBUS DP slave- PG/OP communication- S7 communication- Open communication (SEND/RECEIVE) based on the FDLinterface• The appropriate OPC servers are included in the scope ofsupply of the respective communication software8Siemens ST 70 N · 20108/5

SIMATIC Programming devicesCommunications softwareSOFTNET for PROFIBUS© Siemens AG 20108■ Ordering data Order No. Order No.SOFTNET-S7 Edition 2008Software for S7 communication,including FDL protocol with OPCserver and NCM PC; runtime software,software and electronicmanual on CD-ROM, license keyon USB stick, Class A, for 32-bitWindows XP Professional SP2/3,Windows 2003 Server, R2, SP2,Windows Vista Business/UltimateSP1; Windows 2008 Server,for CP 5512, CP 5611,CP 5611 A2, CP 5621German/English• Single license for 1 installation D 6GK1 704-5CW71-3AA0• Software Update Service for 6GK1 704-5CW00-3AL01year,with automatic extension;requirement:Current software version• Upgrade SOFTNET-S7, D 6GK1 704-5CW00-3AE0Edition 2006 or higher, toSOFTNET-S7 Edition 2008• Upgrade SOFTNET-S7 from D 6GK1 704-5CW00-3AE1V6.0, V6.1, V6.2 or V6.3 toSOFTNET-S7 Edition 2008SOFTNET-DP Edition 2008Software for DP protocol (MasterClass 1 and 2) including FDLprotocol with OPC server andNCM PC; runtime software,software and electronic manualon CD-ROM, license key on USBstick, Windows XP ProfessionalSP2/3, Windows 2003 Server, R2,SP2, Windows Vista Business/UltimateSP1;Windows 2008 Server,for CP 5512, CP 5611,CP 5611 A2, CP 5621German/English• Single license for 1 installation D 6GK1 704-5DW71-3AA0• Software Update Service for 6GK1 704-5DW00-3AL01year,with automatic extension;requirement:Current software version• Upgrade SOFTNET-DP, D 6GK1 704-5DW00-3AE0Edition 2006 or higher, toSOFTNET-DP Edition 2008• Upgrade SOFTNET-DP fromV6.0, V6.1, V6.2 or V6.3 toSOFTNET-DP Edition 2008D 6GK1 704-5DW00-3AE1D: Subject to export regulations: AL: N and ECCN: 5D992SOFTNET-DP SlaveEdition 2008Software for DP Slave, withDP-OPC server and NCM PC;single license for 1 installation,runtime software, software andelectronic manual on CD-ROM,license key on USB stick, Class A,for 32-bit Windows XP ProfessionalSP2/3, Windows 2003 Server,R2, SP2, Windows Vista Business/Ultimate;for CP 5512, CP 5611,CP 5611 A2, CP 5621German/English• Single license for 1 installation D 6GK1 704-5SW71-3AA0• Software Update Service for 6GK1 704-5SW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade SOFTNET-DP Slave, D 6GK1 704-5SW00-3AE0Edition 2006 or higher, toSOFTNET-DP Slave Edition2008• Upgrade SOFTNET-DP Slavefrom V6.0, V6.1, V6.2 or V6.3 toSOFTNET-DP Slave Edition2008D 6GK1 704-5SW00-3AE18/6 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesCommunications softwareS7-REDCONNECT■ Overview• For connecting PCs over redundant Industrial Ethernet to theSIMATIC S7-400H• Protected from communication failures arising from a fault inthe double bus or in redundant rings• For redundantly configured Industrial Ethernet• Can also be implemented in non-redundant networks• No additional programming overhead for the PC and in H systems• The appropriate OPC server and configuration tools are includedin the scope of supply of the respective communicationsoftware• Enhanced redundancy over 4-way communication (STEP 7V5.1 + SP4 and higher)System configuration for S7-REDCONNECT■ Ordering dataOrder No.S7-REDCONNECT Edition 2008Software for fail-safe S7 communicationover redundant networksincl. S7-OPC server, S7-16132008, runtime software, softwareand electronic manual on CD-ROM, license key on USB flashdrive, Class A, for 32-bitWindows XP Professional SP2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Single license for 1 installation D 6GK1 716-0HB71-3AA0• Software Update Service for 6GK1 716-0HB00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade S7-REDCONNECT, D 6GK1 716-0HB00-3AE02006 Edition or higher, toS7-REDCONNECT 2008 Edition• Upgrade S7-REDCONNECT D 6GK1 716-0HB00-3AE1from V6.0, V6.1, V6.2 or V6.3 toS7-REDCONNECT Edition 2008Power Pack S7-REDCONNECT D 6GK1 716-0HB71-3AC0Edition 2008For expanding S7-1613 2008 toS7-REDCONNECT, single licensefor 1 installation, runtime software,software and electronic manualon CD-ROM, license key on USBflash drive, Class A, for 32-bitWindows XP Professional SP2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/EnglishCP 1613 A26GK1 161-3AA01communications processorPCI card (32-bit, 33 MHz/66 MHz;3.3 V/5 V universal keyed) forconnection to Industrial Ethernet(10/100 Mbit/s) with ITP and RJ45connection over S7-1613 andS7-REDCONNECT, incl. driversfor 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1CP 16236GK1 162-3AA00communications processorPCI Express x1 card (3.3 V/12) forconnection to Industrial Ethernet(10/100/1000 Mbit/s) with 2-portswitch (RJ45) connection viaS7-1613 and S7-REDCONNECT,incl. driver for 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1D: Subject to export regulations: AL: N and ECCN: 5D9928Siemens ST 70 N · 20108/7

SIMATIC Programming devicesCommunications softwareSOFTNET for Industrial Ethernet© Siemens AG 20108■ Overview• For coupling programming devices/PCs/workstations toprogrammable controllers• Communication services:- PG/OP communication- S7 communication- Open communication (SEND/RECEIVE)• Can be used with- Layer 2 Ethernet card (PCI/PCIe)- Integrated Industrial Ethernet interface- Modem (Remote Access Service RAS)• Complete protocol stack as a software package• The appropriate OPC server and configuration tools are includedin the scope of supply of the respective communicationsoftwareSystem configuration SOFTNET for Industrial Ethernet■ Technical specificationsPerformance dataS7 and PG/OP communication(number of operable connections)• SOFTNET-S7 max. 64• SOFTNET-S7 Lean max. 8■ Ordering dataOrder No.SOFTNET Edition 2008 forIndustrial EthernetSoftware for S7 and opencommunication, incl. OPC server,PG/OP communication andNCM PC, runtime software, softwareand electronic manual onCD-ROM, license key on USBflash drive, Class A, for 32-bitWindows XP Professional SP2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/EnglishSOFTNET-S7 Edition 2008 forIndustrial Ethernetup to 64 connections• Single license for 1 installation D 6GK1 704-1CW71-3AA0• Software Update Service for 6GK1 704-1CW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade from Edition 2006 to D 6GK1 704-1CW00-3AE0Edition 2008• Upgrade from V6.0, V6.1, V6.2 D 6GK1 704-1CW00-3AE1or V6.3 to Edition 2008SOFTNET-S7 Lean Edition 2008for Industrial Ethernetup to 8 connections• Single license for 1 installation D 6GK1 704-1LW71-3AA0• Software Update Service for 6GK1 704-1LW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade from Edition 2006 to D 6GK1 704-1LW00-3AE0Edition 2008• Upgrade from V6.0, V6.1, V6.2 D 6GK1 704-1LW00-3AE1or V6.3 to Edition 2008SOFTNET-PG Edition 2008 forIndustrial EthernetSoftware for PG/OP-communication;runtime software, softwareand electronic manual onCD-ROM, license key on USBflash drive, Class A, for 32-bitWindows XP Professional SP2/3,Windows 2003 Server R2, SP2,Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Single license for 1 installation D 6GK1 704-1PW71-3AA0• Software Update Service for 6GK1 704-1PW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade from Edition 2006 to D 6GK1 704-1PW00-3AE0Edition 2008• Upgrade from V6.0, V6.1, V6.2 D 6GK1 704-1PW00-3AE1or V6.3 to Edition 2008D: Subject to export regulations: AL: N and ECCN: 5D9928/8 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesCommunications softwareSOFTNET PN IO■ OverviewPC/IPC withSOFTNET PN IOSIMATIC NETOPC-ScoutWinCCOPC-ClientMicrosoft OfficeOPC-ClientOPC XMLWebclientCOM/DCOMPN IO OPC-ServerOPC XML DAas WebserviceInternetIntranetPROFINETCommunicationSOFTNET PN IO8e.g. S7-300 withCP 342-5 as SlaveET 200SG_IK10_XX_10073PC with SOFTNET PN IO as PROFINET IO Controller• Software with PROFINET IO Controller function for couplingPG/PC and IPC with PROFINET IO Devices• Possible applications:- PC-based control systems- HMI systems- Test applications• Communication services:- PROFINET IO Controller• Can be used with- Integrated interfaces of SIMATIC PG/PC- You can find more information about the environment of useat www.siemens.com/simatic-net/ik-info• Cost-effective solution for the low-end performance range• OPC server for I/O interfacing over PROFINET included inscope of supplySiemens ST 70 N · 20108/9

SIMATIC Programming devicesCommunications softwareSOFTNET PN IO■ Technical specifications ■ Ordering data Order No.Performance data• Number of operable IO devices Max. 64• Number of external IO-lines in onecentral rack• Size of IO data areas overallSOFTNET PN IOMax. 1- I/O input area Max. 2 KB- I/O output area Max. 2 KB• Size of I/O data area per connectedI/O device- I/O input range Max. 1433 byte- I/O output range Max. 1433 byte© Siemens AG 2010SOFTNET PN IO Edition 2008Software for PROFINET IOcontroller with OPC server andNCM PC; runtime software,software and electronic manualon CD-ROM, license key on USBstick, Class A, for 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Single license for 1 installation D 6GK1 704-1HW71-3AA0• Software Update Service for 6GK1 704-1HW00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade SOFTNET PN IO, D 6GK1 704-1HW00-3AE0Edition 2006 or higher, toSOFTNET PN IO Edition 2008• Upgrade SOFTNET PN IO from D 6GK1 704-1HW00-3AE1V6.0, V6.1, V6.2 or V6.3 toSOFTNET PN IO Edition 2008D: Subject to export regulations: AL: N and ECCN: 5D99288/10 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesCommunications softwareOPC server for Industrial Ethernet■ Overview• The appropriate OPC servers are included in the scope ofsupply of the respective communication software• Standardized, open multi-vendor interface• It permits interfacing of OPC-capable Windows applicationsto S7-communication, open communication(SEND/RECEIVE), PROFINET and SNMP.• OPC Scout with browser functionality as an OPC client andOCX Data ControlPC/Windows PCSIMATIC NETOPC-ScoutWinCCOPC-ClientMicrosoft OfficeOPC-ClientOPC XMLWebclientOPC UACOM/DCOMInternetIntranetDP OPC serverFMS OPC serverDP protocolFMS protocolS7 OPC serverS7 communicationS/R OPC serverOpencommunication(SEND/RECEIVE)PN IO OPC serverPROFINETSNMPOPC serverSNMPOPC XML DAas Web servicePROFINETPROFIBUSPCIndustrial EthernetS7-4008S7-300SIMATIC S5ET 200proSIMATIC S5(SEND/RECEIVE only)PCG_IK10_XX 10103System integration with OPC serverSiemens ST 70 N · 20108/11

SIMATIC Programming devicesCommunications softwareOPC server for Industrial Ethernet© Siemens AG 20108■ Technical specificationsProgrammingInterfacesProductsIndustrial Ethernet• S7-1613,SOFTNET-S7 for IndustrialEthernet,SOFTNET-S7 LeanPROFINET• SOFTNET PN IO• PN CBA OPC serverPROFIBUS• DP-5613, SOFTNET-DP,SOFTNET-DP slave• FMS-5613• Synchronous and asynchronousreading and writing of variables• Monitoring of variables using theOPC server with a signal to theclient when a change occurs• Use of quantity operations;so a large amount of data canbe processed in a short time.• Custom Interface (C++, NET)for high OPC performance• Automation Interface(VB, Excel, Access, Delphi, ...)for ease-of-use• Graphics with OCX for configuringinstead of programming• OPC XML-Interface for DataAccessinclude OPC servers for:S7-OPC serverfor S7 communication, XML-DAS5-OPC serverfor open communication 1) ,XML-DASNMP OPC server forSNMP protocol access; XML-DAPN IO OPC serverfor PROFINET IO communication;XML-DAPN CBA OPC serverfor access to CBA components;XML-DADP-OPC serverfor PROFIBUS DP communication;XML-DAFMS-OPC serverfor PROFIBUS FMS communication;XML-DA■ Ordering dataOrder No.PN CBA OPC ServerEdition 2008PROFINET OPC server for CBA;runtime software, software andelectronic manual on CD-ROM,license key on USB stick, Class A,for 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Single license for 1 installation D 6GK1 706-0HB71-3AA0• Software Update Service for 6GK1 706-0HB00-3AL01 year,with automatic extension;requirement:current software version• Upgrade from Edition 2006 D 6GK1 706-0HB00-3AE0and higher toEdition 2008, single license• Upgrade from V6.0 toD 6GK1 706-0HB00-3AE1Edition 2008, single licenseSNMP OPC Server Edition 2008Including MIB compiler;single license for 1 installation ofthe runtime software, softwareand electronic manual onCD-ROM; license key on USBflash drive, Class A, for 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Basic 2008D 6GK1 706-1NW71-3AA0Administration of up to 20IP addresses;Single license for 1 installation- Software Update Service for 6GK1 706-1NX00-3AL01 year, with automatic extension;requirement:current software version- Upgrade from Edition 2006 D 6GK1 706-1NW00-3AE0and higher to Edition 2008,single license- Upgrade from V6.0 to D 6GK1 706-1NW00-3AE1Edition 2008, single license• Extended 2008D 6GK1 706-1NX71-3AA0Administration of up to 200IP addresses- Upgrade from Edition 2006 to D 6GK1 706-1NX00-3AE0Edition 2008, single license- Upgrade from V6.0 to D 6GK1 706-1NX00-3AE1Edition 2008, single license• Power Pack 2008;upgrade from SNMP OPCServer Basic to SNMP OPCServer Extended Edition 2008D 6GK1 706-1NX71-3AC01) also S5-compatible communicationD: Subject to export regulations: AL: N and ECCN: 5D9928/12 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesCommunications softwarePN CBA OPC server■ Overview• Access to variables in PROFINET CBA components over theOPC interface• Use of the objects and symbols defined using the PROFINETengineering tool SIMATIC iMap and STEP 7• Adding PROFINET functionality to existing installations. Thisenables it to be used in parallel with other communicationprotocols such as S7 communication with SOFTNET-S7 forIndustrial Ethernet.• OPC Scout as an OPC client with browser functions for thevariables of the PROFINET CBA componentsWinCC flexibleOPC clientMicrosoft OfficeOPC clientSIMATIC NETOPC ScoutSOFTNET-S7SOFTNET-S7 LeanS7-1613 PN CBA OPC-Server SOFTNET PN IOS7-OPC-ServerPN CBAOPC-ServerPN IO OPC-ServerS7 communicationPROFINET CBAPROFINET IOPROFINETIndustrial EthernetPROFINETCBAcomponente.g. S7-400withCP 443-1 AdvancedPROFINETCBAcomponente.g. S7-300 withCP 343-1 andCP 343-5IE/PBLinkPN IOPROFINETIO Devices8PROFIBUS DPPROFIBUS DPET 200SPROFINETIO DeviceData accessData access via PROFIBUS DPfrom viewpoint of PN CBA OPC serverfrom viewpoint of PN IO OPC serverET 200SG_IK10_XX_10122System integration with the PN CBA OPC serverSiemens ST 70 N · 20108/13

SIMATIC Programming devicesCommunications softwarePN CBA OPC server© Siemens AG 20108■ Technical specifications ■ Ordering data Order No.ProgrammingInterfacesProtocolsConfigurationPN CBA OPC server• Open and standardizedPROFINET communication(CBA)• Number of communication partnersmax. 228• Number of connections max. 10 000• Synchronous and asynchronousreading and writing of variables• Monitoring of variables by the OPCserver with an alarm message tothe client in the case of a change• Use of batch operations, so a largevolume of data can be processed ina short time• Custom Interface (C++, .NET)• Automation Interface(Visual Basic, Excel, Access,...)• OPC Data Control• OPC XML Interface for Data Access• DCOM protocolConfiguring software forPROFINET SIMATIC iMapPN CBA OPC ServerEdition 2008PROFINET OPC server for CBA;runtime software, software andelectronic manual on CD-ROM,license key on USB flash drive,Class A, for 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Single license for 1 installation D 6GK1 706-0HB71-3AA0• Software Update Service for 6GK1 706-0HB00-3AL01 year,with automatic extension;requirement:Current software version• Upgrade of PN CBA OPC D 6GK1 706-0HB00-3AE0Server, Edition 2006 or higher,to PN CBA OPC Server,Edition 2008• Upgrade of PN CBA OPC D 6GK1 706-0HB00-3AE1Server from V6.0, V6.1, V6.2 orV6.3 to PN CBA OPC ServerEdition 2008Software iMap V3.0for configuringPROFINET CBARequirement:Windows 2000 Prof. withService Pack 4 or later orWindows XP Prof. withService Pack 1 or later orWindows 2003 Serverwith Service Pack 1 or later;on PG or PC with Pentiumprocessor, min. 1 GHz;STEP 7 V5.3 or later withService Pack 3,PN OPC Server V6.3 or laterType of supply:German, English with electronicdocumentation• Single license D 6ES7 820-0CC04-0YA5• Software Update Service D 6ES7 820-0CC01-0YX2• Upgrade to V3.0,single licenseD 6ES7 820-0CC04-0YE5D: Subject to export regulations: AL: N and ECCN: 5D9928/14 Siemens ST 70 N · 2010

© Siemens AG 2010SIMATIC Programming devicesCommunications softwareSNMP OPC server■ OverviewPump MainPump Substation 1Pumpstation Network1GBitPump Old• Status monitoring and network management of SNMP-capabledevices in any OPC client systems; e.g. SIMATICHMI/SCADA, office application• Easy access to SNMP-capable devices over the OPC interface• Devices without SNMP agents can be monitored using theping mechanism• Complete integration in the SIMATIC NET OPC server environment• SNMP can be implemented in parallel with other communicationsprotocols such as PROFINET or S7 communication• Configuring with STEP 7 or NCM PC• Autodiscovery function for integrating accessible Ethernetdevices (STEP 7 V5.3+SP3 or higher)S_IK10_XX_00004■ Ordering dataSNMP OPC Server Edition 2008Including MIB compiler;single license for 1 installation ofthe runtime software, softwareand electronic manual onCD-ROM; license key on USBflash drive, Class A, for 32-bitWindows XP Professional SP 2/3;Windows 2003 Server R2, SP2;Windows Vista Business/UltimateSP1;Windows 2008 Server;German/English• Basic 2008DAdministration of up to 20IP addresses;Single license for 1 installation- Software Update Service for1 year, with automatic extension;requirement:current software version- Upgrade ofDSNMP OPC Server Basic,Edition 2006 or higher,to SNMP OPC Server BasicEdition 2008- Upgrade ofDSNMP OPC Server Basic fromV6.0, V6.1, V6.2 or V6.3 toSNMP OPC Server BasicEdition 2008• Extended 2008DAdministration of up to 200IP addresses- Software Update Service for1 year, with automatic extension;requirement:current software version- Upgrade ofDSNMP OPC Server Extended,Edition 2006 or higher, toSNMP OPC Server ExtendedEdition 2008- Upgrade ofDSNMP OPC Server Extendedfrom V6.0, V6.1, V6.2 or V6.3 toSNMP OPC Server ExtendedEdition 2008• Power Pack 2008;Dupgrade from SNMP OPCServer Basic to SNMP OPCServer Extended Edition 2008Order No.6GK1 706-1NW71-3AA06GK1 706-1NW00-3AL06GK1 706-1NW00-3AE06GK1 706-1NW00-3AE16GK1 706-1NX71-3AA06GK1 706-1NX00-3AL06GK1 706-1NX00-3AE06GK1 706-1NX00-3AE16GK1 706-1NX71-3AC0D: Subject to export regulations: AL: N and ECCN: 5D9928■Siemens ST 70 N · 20108/15

SIMATIC Programming devices© Siemens AG 201088/16 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based Automation9/2 Embedded Automation9/2 SIMATIC S7 modularembedded controller9/12 SIMATIC IPC427C bundles9/14 SIMATIC HMI IPC477C embedded9/20 SIMATIC Panel PC 477B Bundles9/24 SIMATIC WinAC MP9/28 PC-based Control9/28 SIMATIC WinAC RTX9/34 SIMATIC WinAC RTX F9/40 SIMATIC WinAC ODKBrochuresFor brochures serving as selectionguides for SIMATIC products refer to:http://www.siemens.com/simatic/printmaterialSiemens ST 70 N · 2010

Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller© Siemens AG 2010■ Overview• Quick start in automation solutions with embedded PC platforms.- SIMATIC WinAC RTX or WinAC RTX F preinstalled on EC31ready for switch-on- Prepared for use in a SIMATIC environment with PROFINETand Industrial Ethernet- Commissioning, as for S7-300, by automation specialists- Configuring and programming with SIMATIC STEP 7 overIndustrial Ethernet- Optional visualization• Modular expansion capability:Central expansion with- S7-300 I/O (SM modules of S7-300)- Expansion modules for additional PC interfaces, e.g. DVI-I,USB, Gigabit Ethernet networks and memory card slots, aswell as PCI-104• Rugged operation- Operation without a hard disk, based on flash disk andWindows XP embedded- Operation without a fan• Flexibility of a PC-based automation environment- Free memory space on flash disk can be used for other PCapplications- Use of WinAC ODK with SIMATIC WinAC RTX and WinACRTX F (read-only in safety-related program part)- Connection option for USB devices- Memory capacity expandable using multimedia card• Data retentivity for WinAC RTX and RTX F without uninterruptiblepower supply (UPS)9■ Technical specificationsProduct type designation6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTProduct versionHardware product version 04 04 04 04 04 04Firmware version V1.3 V1.3 V1.3 V1.3 V1.3 V1.3PC configurationComputer platformSIMATIC S7modular embeddedcontrollerSIMATIC S7modular embeddedcontrollerSIMATIC S7modular embeddedcontrollerSIMATIC S7modular embeddedcontrollerSIMATIC S7modular embeddedcontrollerSIMATIC S7modular embeddedcontrollerProcessor selectionIntel Core Duo1.2 GHzIntel Core Duo1.2 GHzIntel Core Duo1.2 GHzIntel Core Duo1.2 GHzIntel Core Duo1.2 GHzIntel Core Duo1.2 GHzMain memory 1 GB RAM 1 GB RAM 1 GB RAM 1 GB RAM 1 GB RAM 1 GB RAMFlash Disk 2 GB 2 GB 2 GB 2 GB 2 GB 2 GBOperating systemsWindows XPembedded SP2FP2007Windows XPembedded SP2FP2007Windows XPembedded SP2FP2007Windows XPembedded SP2FP2007Windows XPembedded SP2FP2007Windows XPembedded SP2FP2007Power supplyInput voltage• Rated value, 24 V DC Yes Yes Yes Yes Yes Yes• permissible range, 20.4 V 20.4 V 20.4 V 20.4 V 20.4 V 20.4 Vlower limit (DC)• permissible range, 28.8 V 28.8 V 28.8 V 28.8 V 28.8 V 28.8 Vupper limit (DC)Input current• Rated value at 24 V DC800 mA; withoutbackplane busand USB powersupply800 mA; withoutbackplane busand USB powersupply800 mA; withoutbackplane busand USB powersupply800 mA; withoutbackplane busand USB powersupply800 mA; withoutbackplane busand USB powersupply800 mA; withoutbackplane busand USB powersupply9/2 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller■ Technical specifications (continued)Product type designation6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTSupply voltagesMains buffering• Mains buffering 5ms 5ms 5ms 5ms 5ms 5msPower lossPower loss, typ. 34 W 34 W 34 W 34 W 34 W 34 WMemoryMemory type256 KB non-volatilememory forretentive data512 KB non-volatilememory forretentive data512 KB non-volatilememory forretentive data512 KB non-volatilememory forretentive data512 KB non-volatilememory forretentive data512 KB non-volatilememory forretentive dataCPU/ blocksDB• Number, max.Max. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB each• Size, max. 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteFB• Number, max.Max. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB each• Size, max. 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteFC• Number, max.Max. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB each• Size, max. 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 KibyteOB• Number, max.Max. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB each• Size, max. 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte• Number of free cycle OBs 1; OB 1 1; OB 1 1; OB 1 1; OB 1 1; OB 1• Number of time alarm OBs 1; OB 10 1; OB 10 1; OB 10 1; OB 10 1; OB 10• Number of delay alarm OBs 1; OB 20 1; OB 20 1; OB 20 1; OB 20 1; OB 20• Number of watchdog9; OB 30-38 9; OB 30-38 9; OB 30-38 9; OB 30-38 9; OB 30-38interrupts• Number of process alarm1; OB 40 1; OB 40 1; OB 40 1; OB 40 1; OB 40OBs• Number of startup OBs 2; OB 100, 102 2; OB 100, 102 2; OB 100, 102 2; OB 100, 102 2; OB 100, 102• Number of asynchronouserror OBs• Number of synchronouserror OBsNesting depth7; OB 80, 82-85,86, 887; OB 80, 82-85,86, 887; OB 80, 82-85,86, 887; OB 80, 82-85,86, 887; OB 80, 82-85,86, 882; OB 121, 122 2; OB 121, 122 2; OB 121, 122 2; OB 121, 122 2; OB 121, 122• per priority class 24 24 24 24 24• additional within an error24 24 24 24 24OB9Siemens ST 70 N · 20109/3

Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller© Siemens AG 20109■ Technical specifications (continued)Product type designation6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTCPU/ processing timesfor bit operations, min. 0.004 µs; typ. 0.004 µs; typ. 0.004 µs; typ. 0.004 µs; typ. 0.004 µs; typ.for fixed point arithmetic,0.003 µs; typ. 0.003 µs; typ. 0.003 µs; typ. 0.003 µs; typ. 0.003 µs; typ.min.for floating point arithmetic,0.004 µs; typ. 0.004 µs; typ. 0.004 µs; typ. 0.004 µs; typ. 0.004 µs; typ.min.Times/counters and theirretentivityS7 counter• Number 2 048 2 048 2 048 2048 2048• Retentivity- can be set Yes Yes Yes Yes Yes- lower limit 0 0 0 0 0- upper limit 2 047 2 047 2 047 2047 2047- preset 8 8 8 8 8• Counting range- can be set Yes Yes Yes Yes Yes- lower limit 0 0 0 0 0- upper limit 999 999 999 999 999IEC counter• present Yes Yes Yes Yes Yes• Type SFB SFB SFB SFB SFBS7 times• Number 2 048 2 048 2 048 2048 2048• Retentivity- can be set Yes Yes Yes Yes Yes- lower limit 0 0 0 0 0- upper limit 2 047 2 047 2 047 2047 2047• Time range- lower limit 10 ms 10 ms 10 ms 10 ms 10 ms- upper limit 9 990 s 9 990 s 9 990 s 9990s 9 990 sIEC timer• present Yes Yes Yes Yes Yes• Type SFB SFB SFB SFB SFBData areas and theirretentivityretentive data area, total 512 KB 512 KB 512 KB 512 KB 512 KBFlag• Number, max. 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte• of which retentive withoutMB 0 to MB 16383 MB 0 to MB 16383 MB 0 to MB 16383 MB 0 to MB 16383 MB 0 to MB 16383battery• Retentivity preset MB 0 to MB 15 MB 0 to MB 15 MB 0 to MB 15 MB 0 to MB 15 MB 0 to MB 15• Number of clock memories 8 8 8 8 8Data blocks• Number, max.Max. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB eachMax. code sizeand max. datasize: 4 MB each• Size, max. 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte 64 Kibyte9/4 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller■ Technical specifications (continued)Product type designation6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTAddress areaI/O address area• overall 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte•Outputs 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte• of which, distributed- Inputs 8 Kibyte 8 Kibyte 8Kibyte 8 Kibyte 8 Kibyte-Outputs 8 Kibyte 8 Kibyte 8Kibyte 8 Kibyte 8 KibyteProcess image• Inputs, adjustable 16 Kibyte 16 Kibyte 8Kibyte 8 Kibyte 8 Kibyte• Outputs, adjustable 16 Kibyte 16 Kibyte 8Kibyte 8 Kibyte 8 Kibyte• Inputs, default 512 byte 512 byte 512 byte 512 byte 512 byte• Outputs, default 512 byte 512 byte 512 byte 512 byte 512 byteSubprocess images• Number of subprocess15 15 15 15 15images, max.Digital channels• Inputs 128 000 128 000 128 000 128 000 128 000•Outputs 128 000 128 000 128 000 128 000 128 000Analog channels• Inputs 8 000 8 000 8 000 8000 8000•Outputs 8 000 8 000 8 000 8000 8000Time of dayClock• Hardware clock(real-time clock)Clock synchronizationYes;Resolution: 1 sYes;Resolution: 1 sYes;Resolution: 1 sYes;Resolution: 1 s• supported Yes Yes Yes Yes Yes• on Ethernet via NTP Yes Yes Yes Yes YesS7 message functionsNumber of login stations formessage functions, max.62; The alarmfunctions cannotcurrently be usedfor central busmodules62; The alarmfunctions cannotcurrently be usedfor central busmodules62; The alarmfunctions cannotcurrently be usedfor central busmodules62; The alarmfunctions cannotcurrently be usedfor central busmodulesYes;Resolution: 1 s62; The alarmfunctions cannotcurrently be usedfor central busmodulesProcess diagnosticYes; Alarm_S Yes; Alarm_S Yes; Alarm_S Yes; Alarm_S Yes; Alarm_SmessagesTest commissioningfunctionsStatus/control• Status/control variable Yes Yes Yes Yes YesForcing• Forcing No No No No NoDiagnostic buffer• present Yes Yes Yes Yes YesMonitoring functionsStatus LEDs Yes Yes Yes Yes YesCommunication functionsPG/OP communication Yes Yes Yes Yes YesGlobal data communication• supported No No No No No9Siemens ST 70 N · 20109/5

Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller© Siemens AG 20109■ Technical specifications (continued)Product type designation6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTS7 basic communication• supported No No No No NoS7 communication• supported Yes Yes Yes Yes Yes• as server Yes Yes Yes Yes Yes• as client Yes Yes Yes Yes YesOpen IE communication• TCP/IPYes; Via integratedPROFINETYes; Via integratedPROFINETYes; Via integratedPROFINETYes; Via integratedPROFINETYes; Via integratedPROFINETinterface (X1) and interface and interface (X1) and interface (X1) and interface (X1) andloadable FBs loadable FBs loadable FBs loadable FBs loadable FBs- Number of connections,32 32 32 32 32max.- Data length, max. 8 192 byte 8 192 byte 8192byte 8192byte• ISO-on-TCP (RFC1006) No No No No No•UDPYes; Via integratedPROFINETinterface (X1) andloadable FBsYes; Via integratedPROFINETinterface andloadable FBsYes; Via integratedPROFINETinterface (X1) andloadable FBsYes; Via integratedPROFINETinterface (X1) andloadable FBsYes; Via integratedPROFINETinterface (X1) andloadable FBs- Number of connections,32 32 32 32 32max.- Data length, max. 1 472 byte 1 472 byte 1472byte 1472byteNumber of connections• overall 64 64 64 64 64• usable forPG communication- reserved for1 1 1 1 1PG communication• usable forOP communication- reserved for1 1 1 1 1OP communication1st interfaceType of interface PROFINET PROFINET PROFINET PROFINET PROFINETPhysics 2x RJ45 2x RJ45 2x RJ45 2x RJ45 2x RJ45automatic detection ofYes Yes Yes Yes Yestransmission speedAutonegotiation Yes Yes Yes Yes YesAutocrossing Yes Yes Yes Yes YesNumber of connection32 32 32 32 32resourcesFunctionality•MPI No No No No No•DP master No No No No No• DP slave No No No No No• PROFINET IO Device No No No No No• PROFINET IO Controller Yes Yes Yes Yes Yes• PROFINET CBA Yes Yes Yes Yes Yes• Open IE communication Yes Yes Yes Yes Yes• Point-to-point connection No No No No No9/6 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller■ Technical specifications (continued)Product type designation6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTPROFINET IO Controller• Services- PG/OP communication Yes Yes Yes Yes Yes- S7 routing Yes Yes Yes Yes Yes- S7 communication Yes Yes Yes Yes Yes- Isochronous mode No No No No No• Total number of connectable256 256 256 256 256IO Devices, max.• Number of IO Devices64 64 64 64 64with IRT and the option"high flexibility", max.• IRT, supported Yes Yes Yes Yes Yes• Prioritized startupYes Yes Yes Yes Yessupported- Number of IO Devices,32 32 32 32 32max.• Activation/deactivation ofYes Yes Yes Yes YesIO Devices- Number of IO Devices8 8 8 8 8that can be simultaneouslyactivated/deactivated,max.• IO Devices changingYes Yes Yes Yes Yesduring operation(partner ports), supported- Max. number of8 8 8 8 8IO devices per tool- Send cycles Setting options:250 µs, 500 µsand 1 msSetting options:250 µs, 500 µsand 1 msSetting options:250 µs, 500 µsand 1 msSetting options:250 µs, 500 µsand 1 msSetting options:250 µs, 500 µsand 1 ms- Refresh times 250 µs ... 128 ms(for 250 µs sendcycle);500 µs ... 256 ms(for 500 µs sendcycle);1 ms ... 512 ms(for 1 ms sendcycle);250 µs ... 128 ms(for 250 µs sendcycle);500 µs ... 256 ms(for 500 µs sendcycle);1 ms ... 512 ms(for 1 ms sendcycle);250 µs ... 128 ms(for 250 µs sendcycle);500 µs ... 256 ms(for 500 µs sendcycle);1 ms ... 512 ms(for 1 ms sendcycle);250 µs ... 128 ms(for 250 µs sendcycle);500 µs ... 256 ms(for 500 µs sendcycle);1 ms ... 512 ms(for 1 ms sendcycle);250 µs ... 128 ms(for 250 µs sendcycle);500 µs ... 256 ms(for 500 µs sendcycle);1 ms ... 512 ms(for 1 ms sendcycle);• Address area- Inputs, max. 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte-Outputs, max. 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte 16 Kibyte• User data per address2 Kibyte 2 Kibyte 2Kibyte 2 Kibyte 2 Kibytearea, max.- User data consistency,max.256 byte 256 byte 256 byte 256 byte 256 bytePROFINET CBA• acyclic transmission Yes Yes Yes Yes Yes• cyclic transmission Yes Yes Yes Yes YesOpen IE communication• Open IE communication,Yes Yes Yes Yes Yessupported• Number of connections,max.32 32 32 32 32• Local port numbers used atthe system end0, 20, 21, 23, 25,80, 102, 135, 161,8 080, 34 962,34 963, 34 964,65 532, 65 533,65 534, 65 5350, 20, 21, 23, 25,80, 102, 135, 161,8 080, 34962,34 963, 34 964,65 532, 65 533,65 534, 65 5350, 20, 21, 23, 25,80, 102, 135, 161,8 080, 34 962,34 963, 34 964,65 532, 65 533,65 534, 65 5350, 20, 21, 23, 25,80, 102, 135, 161,8 080, 34 962,34 963, 34 964,65 532, 65 533,65 534, 65 5350, 20, 21, 23, 25,80, 102, 135, 161,8 080, 34 962,34 963, 34 964,65 532, 65 533,65 534, 65 5359Siemens ST 70 N · 20109/7

Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller© Siemens AG 20109■ Technical specifications (continued)Product type designationPROFINET functions• Recognition of the accessiblestations, supported• Assignment of theIP address, supported• Assignment of the devicename, supported• Topology recognition,supported• Extended networkdiagnostics with StandardMIB II, supported2nd interfaceType of interface6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTX6ES7 677-1FD00-0FB0S7-mEC,EC31-RTX F6ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PT6ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PT6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTYes; DCP Yes; DCP Yes; DCP Yes; DCP Yes; DCPYes; DCP Yes; DCP Yes; DCP Yes; DCP Yes; DCPYes; DCP Yes; DCP Yes; DCP Yes; DCP Yes; DCPYes; LLDP, LLDPMIB, SNMPYes; StandardMIB II, SNMPIntegratedEthernet interfaceYes; LLDP, LLDPMIB, SNMPYes; StandardMIB II, SNMPIntegratedEthernet interfaceYes; LLDP, LLDPMIB, SNMPYes; StandardMIB II, SNMPIntegratedEthernet interfaceYes; LLDP, LLDPMIB, SNMPYes; StandardMIB II, SNMPIntegratedEthernet interfaceYes; LLDP, LLDPMIB, SNMPYes; StandardMIB II, SNMPIntegratedEthernet interfacePhysics Ethernet RJ45 Ethernet RJ45 Ethernet RJ45 Ethernet RJ45 Ethernet RJ45automatic detection ofYes Yes Yes Yes Yestransmission speedAutonegotiation Yes Yes Yes Yes YesAutocrossing No No No No NoNumber of connection32 32 32 32 32resourcesFunctionality• PROFINET IO Controller No No No No No• PROFINET IO Device No No No No No• PROFINET CBA No No No No No• PROFINET CBA-SRT No No No No NoCPU/ programmingConfiguration software• STEP 7Yes; V5.4 SP4or higher+ HW update/iMap V3.0 SP1Yes; STEP7 V5.4SP5 or higher+ HSP135 asbasic requirementYes; V5.4 SP4or higher+ HW update/iMap V3.0 SP1Yes; V5.4 SP4or higher+ HW update/iMap V3.0 SP1Yes; V5.4 SP4or higher+ HW update/iMap V3.0 SP1for theHSP178 forWinAC RTX F2009 on EmbeddedController /iMap V3.0 SP1Programming language• STEP 7 Yes Yes; V5.4 SP5 Yes Yes Yes•LAD Yes Yes Yes Yes Yes•FBD Yes Yes Yes Yes Yes•STL Yes Yes Yes Yes Yes•SCL Yes Yes Yes Yes Yes•CFC Yes Yes Yes Yes Yes• GRAPH Yes Yes Yes Yes Yes• HiGraph ® Yes Yes Yes Yes YesInstalled softwareVisualizationWinCC flexible RT2008WinCC flexible RT2008WinCC flexible RT20089/8 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller■ Technical specifications (continued)Product type designationControl6ES7 677-1DD00-0BA0SIMATIC S7-mEC,EC316ES7 677-1DD00-0BB0S7-mEC,EC31-RTXSIMATIC WinACRTX 20096ES7 677-1FD00-0FB0S7-mEC,EC31-RTX FSIMATIC WinACRTX F 20096ES7 677-1DD00-0BF0S7-mEC,EC31-HMI/RTX128PTSIMATIC WinACRTX 20096ES7 677-1DD00-0BG0S7-mEC,EC31-HMI/RTX512PTSIMATIC WinACRTX 2009Communication Yes Yes Yes Yes YesEMCEmission of radio interferenceacc. to EN 55 011• Limit class A, for use in Yes Yes Yes Yes Yes Yesindustrial environmentsEnvironmentalrequirementsOperating temperature•Min. 0°C 0°C 0°C 0°C 0°C 0°C• max. 50 °C 50 °C 50 °C 50 °C 50 °C 50 °CStorage/transport temperature•Min. -40 °C -40 °C -40 °C -40 °C -40 °C -40 °C• max. 70 °C 70 °C 70 °C 70 °C 70 °C 70 °CVibrations• Operation, checked accordingYes Yes Yes Yes Yes Yesto IEC 60068-2-6• Transport tested checked Yes Yes Yes Yes Yes Yesto IEC 60068-2-6Shock test• checked according to Yes Yes Yes Yes Yes YesIEC 60068-2-27• checked according to Yes Yes Yes Yes Yes YesIEC 60068-2-29Shock testing• checked according toIEC 60068-2-29Yes Yes Yes Yes Yes Yes• Operation,checked according toIEC 60068-2-29• Storage/transport,checked toIEC 60068-2-29Degree of protectionOperation,checked acc. toIEC 60068-2-27Operation,checked acc. toIEC 60068-2-27Operation,checked acc. toIEC 60068-2-27Operation,checked acc. toIEC 60068-2-27Operation,checked acc. toIEC 60068-2-27Yes Yes Yes Yes Yes Yes6ES7 677-1DD00-0BH0S7-mEC,EC31-HMI/RTX2048PTSIMATIC WinACRTX 2009Operation,checked acc. toIEC 60068-2-27IP20 Yes Yes Yes Yes Yes YesStandards, approvals,certificatesCE mark Yes Yes Yes Yes Yes YesCSA approvalYes; included incULusYes; included incULusYes; included incULusYes; included incULusYes; included incULusYes; included incULusC-TICK Yes Yes Yes Yes Yes YescULus Yes Yes Yes Yes Yes YesFM approval Yes Yes Yes Yes Yes YesDimensions and weightDimensions• Width 160 mm 160 mm 160 mm 160 mm 160 mm 160 mm• Height 125 mm 125 mm 125 mm 125 mm 125 mm 125 mm•Depth 115 mm 115 mm 115 mm 115 mm 115 mm 115 mmWeight• Weight 1.5 kg; Approx. 1.5 kg; Approx. 1.5 kg; Approx. 1.5 kg; Approx. 1.5 kg; Approx. 1.5 kg; Approx.9Siemens ST 70 N · 20109/9

Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller© Siemens AG 20109■ Technical specifications (continued)6ES7 677-1DD40-1AA06ES7 677-1DD50-2AA0Product type designation EM PCI-104 EM PCProduct versionHardware product version 01 01Power supplyInput voltage• Rated value, 24 V DC Yes; Optional:external infeed• permissible range, 20.4 Vlower limit (DC)• permissible range, 28.8 Vupper limit (DC)Current consumptionfrom expansion bus 100 mA 580 mAPower lossPower loss, max.14 WPower loss, typ. 2.4 W;9WWithout insertedPCI-104 cardsInterrupts/diagnostics/status informationDiagnoses• Diagnostic functions Yes; POWER LED,status LEDYes; POWER LED,CARD LED forindicating accessto SD/MMCEMCEmission of radio interferenceacc. to EN 55 011• Limit class A, for use in YesYesindustrial environmentsEnvironmentalrequirementsOperating temperature•Min. 0°C 0°C• max. 50 °C 50 °CStorage/transporttemperature•Min. -40 °C -40 °C• max. 70 °C 70 °CVibrations• Operation, checked acc. to YesYesIEC 60068-2-6• Transport tested checkedto IEC 60068-2-6YesYes6ES7 677-1DD40-1AA06ES7 677-1DD50-2AA0Product type designation EM PCI-104 EM PCShock test• checked according to YesYesIEC 60068-2-27• checked according to YesYesIEC 60068-2-29Shock testing• checked according to YesYesIEC 60068-2-29• Operation, checked acc. to YesYesIEC 60068-2-29• Storage/transport, checked YesYesto IEC 60068-2-29Degree of protectionIP20 Yes YesStandards, approvals,certificatesCE mark Yes YesCSA approval Yes YesC-TICK Yes YescULus Yes YesFM approval Yes YesDimensions and weightDimensions• Width120 mm;Without busconnectorExtension-Bus80 mm;Without busconnector Extension-Bus• Height125 mm; Without 125 mmexternal voltageconnecting terminal•Depth 115 mm 115 mmWeight• Weight 0.5 kg 0.4 kg9/10 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC S7 modular embedded controller■ Ordering data Order No. Order No.SIMATIC S7-modularEmbedded ControllerEC31 E 6ES7 677-1DD00-0BA0Intel CoreDuo 1.2 GHz processorMemory configuration:1 GB RAM, 2 GB Flash Disk;interfaces:1 Industrial Ethernet port,2 PROFINET ports,2 USB ports,1 slot for multimedia card;Software:Windows XP embedded preinstalled,Software Development Kit(SDK) for creating C/C++ applicationswith accesses to centralI/O modulesEC31-RTX E 6ES7 677-1DD00-0BB0Intel CoreDuo 1.2 GHz processorMemory configuration:1 GB RAM, 2 GB Flash Disk;interfaces:1 Industrial Ethernet port,2 PROFINET ports,2 USB ports,1 slot for multimedia card;Software:Windows XP embedded andWinAC RTX 2009 preinstalledEC31-RTX F E 6ES7 677-1FD00-0FB0Intel CoreDuo 1.2 GHz processorMemory configuration:1 GB RAM, 2 GB Flash Disk;interfaces:1 Industrial Ethernet port,2 PROFINET ports,2 USB ports,1 slot for multimedia card;Software:Windows XP embedded andWinAC RTX F 2009 preinstalledSIMATIC S7-modularEmbedded ControllerEC31-HMI/RTXIntel CoreDuo 1.2 GHz processorMemory configuration:1 GB RAM, 2 GB Flash Disk;interfaces:1 Industrial Ethernet port,2 PROFINET ports,2 USB ports,1 slot for multimedia card;Software:Windows XP embedded,WinAC RTX 2009,SIMATIC SOFTNET-S7/V7.0 Leanpreinstalled• With WinCC flexible 2008 RT E 6ES7 677-1DD00-0BF0128 PT• With WinCC flexible 2008 RT E 6ES7 677-1DD00-0BG0512 PT• With WinCC flexible 2008 RT E 6ES7 677-1DD00-0BH02048 PTEM PCI-104 extension module C 6ES7 677-1DD40-1AA0For fitting up to 3 additionalPCI-104 cardsEM PC extension module C 6ES7 677-1DD50-2AA0Additional connection options:2 USB interfaces,1 Gigabit Ethernet interface,1 serial interface,1 slot for CF card,1 slot for SD card/Micro MemoryCardC: Subject to export regulations: AL: N and ECCN: EAR99H E: Subject to export regulations: AL: N and ECCN: 5D002ENC39Siemens ST 70 N · 20109/11

Embedded/PC-based AutomationEmbedded AutomationSIMATIC IPC427C bundles© Siemens AG 20109■ Overview• Quick start in automation solutions with embedded PCplatforms.- SIMATIC WinAC RTX or SIMATIC WinAC RTX F preinstalledon SIMATIC IPC427C ready for switch-on- PROFINET, PROFIBUS and Industrial Ethernet prepared foruse in a SIMATIC environment- Optional WinCC flexible for visualization tasks in parallel withSIMATIC WinAC RTX.- Configuration and programming with SIMATIC STEP 7 viaIndustrial Ethernet, PROFINET, or PROFIBUS• Safety requirements up to SIL 3 according to IEC 61508/62061 or according to EN ISO 13849-1 up to PL e can be implementedwith WinAC RTX F.• Rugged operation- Operation without a hard disk, based on Compact FlashCard (CF Card) or Solid State Disk and Windows EmbeddedStandard- Operation without a fan- 128 KB retentive data for WinAC RTX, also without uninterruptiblepower supply (UPS)• Flexibility of a PC-based automation environment- Free memory space on CF Card can be used for other PCapplications- Use of WinAC ODK with SIMATIC WinAC RTX or SIMATICWinAC RTX F (read-only for fail-safe program part)- Connection option for USB devices, flat panel monitor orscreen- PCI 104 cards can be plugged in• High-performance service concept- Replacement parts for preferred types available in exchange,ex stockNew• New hardware basis SIMATIC IPC427C• Cost-effective variants with PROFINET, based on the standardEthernet interface• Current product versions of the pre-installed software:- SIMATIC WinAC RTX 2009 or SIMATIC WinAC RTX F- SIMATIC WinCC flexible 2008 SP1 (WinAC RTX 2009 only)- SIMATIC NET Edition 2008■ Ordering dataOrder No.SIMATIC IPC427C bundlesPreferred version with SIMATIC WinAC RTX F 2009(Replacement hardware unitavailable in exchange)SIMATIC IPC427C bundle with E 6ES7 675-1DK30-0EP0WinAC RTX F 2009Processor Core2Duo, 1.2 GHz,2x PROFINET (IE),1x PROFIBUS, 2 GB RAM,8 GB CompactFlashPreferred versions with SIMATIC WinAC RTX 2009 andWinCC flexible 2008(Replacement hardware unitavailable in exchange)SIMATIC IPC427C bundles E 6ES7 675-1D 770- 777 0Processor• Celeron M, 1.2 GHz,A2x PROFINET (IE)• Celeron M, 1.2 GHz,B2x PROFINET (IE),1x PROFIBUS• Core2Solo, 1.2 GHz,E2x PROFINET (IE)• Core2Solo, 1.2 GHz,F2x PROFINET (IE),1x PROFIBUS• Core2Duo, 1.2 GHz,J2x PROFINET (IE)• Core2Duo, 1.2 GHz,K2x PROFINET (IE),1x PROFIBUSMain memory• 2 GB RAM 3Internal mass storage• Without 0Externally accessible massstorage• 4 GB CompactFlash,DWindows Embedded 2009 andpreinstalled software• 8 GB CompactFlash,EWindows Embedded 2009 andpreinstalled softwareSoftware configurations• WinAC RTXB• WinCC flexible RT 128 PTC• WinCC flexible RT 512 PTD• WinCC flexible RT 2048 PTE• WinCC flexible RT 4096 PTF• WinAC RTX, WinCC flexible RTK128 PT• WinAC RTX, WinCC flexible RTL512 PT• WinAC RTX, WinCC flexible RTM2048 PT• WinAC RTX, WinCC flexible RT4096 PTNE: Subject to export regulations: AL: N and ECCN: 5D002ENC39/12 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC IPC427C bundles■ Ordering data Order No. Order No.SIMATIC IPC427C bundlesAll versions withSIMATIC WinAC RTX 2009 and WinCC flexible 2008(Hardware: repair only is possible)SIMATIC IPC427C bundles E 6ES7 675-1D 770- 777 0Processor• Celeron M, 1.2 GHz,A2x PROFINET (IE)• Celeron M, 1.2 GHz, 2x PROFI-BNET (IE), 1x PROFIBUS• Core2Solo, 1.2 GHz,E2x PROFINET (IE)• Core2Solo, 1.2 GHz, 2x PROFI-FNET (IE), 1x PROFIBUS• Core2Duo, 1.2 GHz,J2x PROFINET (IE)• Core2Duo, 1.2 GHz, 2x PROFI-KNET (IE), 1x PROFIBUSMain memory• 1 GB RAM 2• 2 GB RAM 3• 4 GB RAM 4Internal mass storage• None (can only be ordered with0externally accessible massstorage)• 80 GB HDD SATA, also with1externally accessible CF• 32 GB Solid State Disk SATA,2Windows Embedded 2009 andpreinstalled software• 4 GB internal CompactFlash,6Windows Embedded 2009 andpreinstalled software• 8 GB internal CompactFlash,7Windows Embedded 2009 andpreinstalled softwareExtern. accessible mass storage• None (can only be ordered withAinternal mass storage)• 4 GB CompactFlash,DWindows Embedded 2009 andpreinstalled software• 8 GB CompactFlash,EWindows Embedded 2009 andpreinstalled softwareSoftware configurations•WinAC RTXB• WinCC flexible RT 128 PTC• WinCC flexible RT 512 PTD• WinCC flexible RT 2048 PTE• WinCC flexible RT 4096 PTF• WinAC RTX, WinCC flexible RTK128 PT• WinAC RTX, WinCC flexible RTL512 PT• WinAC RTX, WinCC flexible RTM2048 PT• WinAC RTX, WinCC flexible RT4096 PTNDelivery versions (ex stock)(Replacement hardware unitsavailable in exchange)SIMATIC IPC427C bundle withWinAC RTX 2009Processor Core2Solo, 1.2 GHz, E 6ES7 675-1DF30-0DB02x PROFINET (IE),1x PROFIBUS, 2 GB RAM,4 GB CompactFlashProcessor Core2Duo, 1.2 GHz, E 6ES7 675-1DK30-0DB02x PROFINET (IE),1x PROFIBUS, 2 GB RAM,4 GB CompactFlashProcessor Core2Duo, 1.2 GHz, E 6ES7 675-1DK30-0EP02x PROFINET (IE),1x PROFIBUS, 2 GB RAM,8 GB CompactFlashSIMATIC IPC427C bundle withWinAC RTX 2009 andWinCC flexible 2008 512 PTProcessor Core2Duo, 1.2 GHz, E 6ES7 675-1DK30-0DL02x PROFINET (IE),1x PROFIBUS, 2 GB RAM,4 GB CompactFlashAccessoriesCP 5603 Microbox Package C 6GK1 560-3AU00Package for using the PROFIBUSCP 5603 in Microbox PCs;comprising a CP 5603 moduleand a Microbox expansion rackCP 1604 Microbox Package 6GK1 160-4AU00Package for using the PROFINETCP 1604 in Microbox PCs;comprising CP 1604, connectionboard, power supply and expansionrack for Microbox PC; implementedwith Development KitDK-16xx PN IO; NCM PExpansion kit PC/104 C 6AG4 070-0BA00-0XA0Expansion rack incl. mountinghardware; 6 itemsCompactFlash Cards4 GB C 6ES7 648-2BF02-0XG08 GB C 6ES7 648-2BF02-0XH0SIMATIC PC keyboardGerman/international,6ES7 648-0CB00-0YA0USB connectionGerman/International,C 6ES7 648-0CD00-0YA0USB connection, with 4-wayUSB HUBSIMATIC PC USB mouse C 6ES7 790-0AA01-0XA0Optical, 3 buttons,with PS/2 adapterSIMATIC PC USB flash drive C 6ES7 648-0DC40-0AA02 GB, USB 2.0, incl. SIMATIC PCBIOS manager, bootable, metalenclosureBook mounting kit C 6ES7 648-1AA20-0YB0Interfaces at the frontC: Subject to export regulations: AL: N and ECCN: EAR99H E: Subject to export regulations: AL: N and ECCN: 5D002ENC39Siemens ST 70 N · 20109/13

Embedded/PC-based AutomationEmbedded AutomationSIMATIC HMI IPC477C embedded© Siemens AG 2010■ OverviewEmbedded PC platform with extremely high industrial compatibilityfor demanding tasks in the field of PC-based automation• Maintenance-free (no rotating components such as fan andhard disk)• Rugged construction: The PC is resistant to the harshestmechanical stress and is extremely reliable in operation• Compact design (only 61-69 mm mounting depth for 12"-19")• High degree of investment protection• Fast integration capability• Front panel versions:- 12" and 15" TFT Touch- 12" and 15" TFT Keys-19" Touch9■ Technical specificationsGeneral featuresProcessors6AV7 884..Intel Celeron M 1.2 GHz, Intel Core2Solo 1.2 GHz orCore2Duo 1.2 GHz6AV7 883..PROIntel Celeron M 1.2 GHz, Intel Core2Solo 1.2 GHz orCore2Duo 1.2 GHzMemory type DDR3-RAM DDR3-RAMMain memory 1 GB, 2 GB or 4 GB 1 GB, 2 GB or 4 GBFree slots 1 x CF card slot (externally accessible) 1 x CF card slot (externally accessible)Operating systemWindows Embedded Standard 2009 (EN/DE) orWindows XP Professional Multi-LanguageWindows Embedded Standard 2009 (EN/DE) orWindows XP Professional Multi-LanguageAdditional OS information Language: EN/DE Language: EN/DESIMATIC SoftwareOptionally with preinstalled bundle softwareSIMATIC WinCC flexible 2008 SP1 and/orWinAC RTX 2009 SIMATIC WinAC RTX FSIMATIC WinCC as web client or single-user stationOptionally with preinstalled bundle softwareSIMATIC WinCC flexible 2008 SP1 and/orWinAC RTX 2009 SIMATIC WinAC RTX FDrivesFloppy drive Optional via external USB floppy drive Optional via external USB floppy driveOptical drives Possible as external drive via USB Possible as external drive via USBHard disk/mass storage Compact Flash drive with 2, 4, or 8 GBand/or SSD (Solid State Disk) with 32 GBCompact Flash drive with 2, 4, or 8 GBand/or SSD (Solid State Disk) with 32 GBInterfacesGraphics interface DVI-I for additional display unit: Color depth 32 bits DVI-I for additional display unit: Color depth 32 bitsConnection for keyboard/mouseUSB / USBUSB / USBSerial interface COM1: 1 x V.24 (RS232) COM1: 1 x V.24 (RS232)PROFIBUS/MPIOptionally onboard, isolated, max. 12 Mbit/s, no plug-incard required, CP5611-compatible, not upgradableOptionally onboard, isolated, max. 12 Mbit/s, no plug-incard required, CP5611-compatible, not upgradablePROFINET (RT/IRT) Optional: 3 x RJ45, CP1616-compatible; not upgradable Optional: 3 x RJ45, CP1616-compatible; not upgradableUSB 1 x on front, 4 x on rear, USB 2.0 (500 mA) 1 x on front, 4 x on rear, USB 2.0 (500 mA)PROFINET (IE), Ethernet onboard, 2 x 10/100/1000 Mbit (RJ45 with/withoutPROFIBUS), 1 x 10/100/1000 Mbit (RJ45 with PROFINET),no plug-in card requiredonboard, 2 x 10/100/1000 Mbit (RJ45 with/withoutPROFIBUS), 1 x 10/100/1000 Mbit (RJ45 with PROFINET),no plug-in card requiredMultimedia No NoSupply voltageSupply voltage 24 V DC 24 V DCMonitoring functionsTemperature Yes YesWatchdog Yes Yes9/14 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC HMI IPC477C embedded■ Technical specifications (continued)DiagBit(similar to S.M.A.R.T.)6AV7 884..Yes (for CF cards and SSD)6AV7 883..PROYes (for CF cards and SSD)Status LEDs Yes (on rear) YesFront side according to IP65 (on the front) according to EN 60529 and NEMA4 IP65 all around according to EN 60529 and NEMA4EN 60529Ambient conditionsVibration load duringoperationShock loading duringoperationTested according to DIN IEC 60068-2-6: 10 … 58 Hz:0.075 mm, 58 … 200 Hz: 9.8 m/s² (1 g)Tested according to DIN IEC 60068-2-7: 50 m/s² (5 g),30 ms, 100 shocksRelative humidity Tested according to DIN IEC 60068-78,DIN IEC 60068-2-30: 5% to 80% at 25 °C(no condensation)Maximum permissibleinstallation angle +/-Ambient temperature duringoperation30° over vertical 45° over verticalTested according to DIN IEC 60068-2-6: 10 … 58 Hz:0.075 mm, 58 … 200 Hz: 9.8 m/s² (1 g)Tested according to DIN IEC 60068-2-7: 50 m/s² (5 g),30 ms, 100 shocksTested according to DIN IEC 60068-78,DIN IEC 60068-2-30: 5% to 80% at 25 °C(no condensation)0 °C … +50 °C in maximum configuration; no fan 15“: 0 °C … +45°C in maximum configuration; no fan19“: 0 °C … +40°C in maximum configuration; no fanCertifications & standardsApprovals CE, cULus(508), marine engineering CE, cULus(508)EMC CE, 55022A, EN 61000-6-4, EN 61000-6-2 CE, 55022A, EN 61000-6-4, EN 61000-6-26AV7 884-0 6AV7 884-1 6AV7 884-2 6AV7 884-3 6AV7 884-5 6AV7 883-6(PRO)6AV7 883-7(PRO)Front panel 12" TFT Touch 12" TFT Key 15" TFT Touch 15" TFT Key 19" TFT Touch 15" TFT Touch 19" TFT TouchDisplayResolution(W x H in pixels)800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1024 x 768 1280 x 1024MTBF backlitdisplay (at 25 °C)50000 h at 24 hcontinousoperation,temperaturedependent50000 h at 24 hcontinuousoperation,temperaturedependent50000 h at 24 hcontinuousoperation,temperaturedependent50000 h at 24 hcontinuousoperation,temperaturedependent50000 h at 24 hcontinuousoperation,temperaturedependent50000 h at 24 hcontinuousoperation,temperaturedependent50000 h at 24 hcontinuousoperation,temperaturedependentType of operationFunction keys No 36 No 36 No No NoAlphanumeric No Yes No Yes No No NokeyboardTouch screen Yes No Yes No Yes Yes Yes(analog/resistive)Mouse on the front No Yes No Yes No No NoDesignCentralized Yes Yes Yes Yes Yes Yes YesconfigurationDistributed No No No No No No NoconfigurationDimensionsMounting dimensionsin centralizedconfiguration(W x H x D,without opticaldrive) in mm368 x 290 x 61 450 x 290 x 61 450 x 290 x 64 450 x 321 x 59 450 x 380 x 71 400 x 310 x 98 483 x 400 x 115Operator controlunit (W x H) inmm400 x 310(7 HU)483 x 310(19", 7 HU)483 x 310(19", 7 HU)483 x 355(19", 8 HU)483 x 400(19", 9 HU)483 x 400(19", 9 HU)483 x 400(19", 9 HU)Weights 6.1 kg 6.6 kg 7.0 kg 6.6 kg 7.2 kg 7.4 kg 10.9 kgGeneral featuresAccessories Touch protectivemembranesInsertable stripsfor keyboardTouch protectivemembranesInsertable stripsfor keyboardTouch protectivemembranesTouch protectivemembranesTouch protectivemembranesPower loss inmaximumconfiguration24 V DC:max. 45 W24 V DC:max. 45 W24 V DC:max. 55 W24 V DC:max. 55 W24 V DC:max. 60 W24 V DC:max. 55 W24 V DC:max. 55 W9Siemens ST 70 N · 20109/15

Embedded/PC-based AutomationEmbedded AutomationSIMATIC HMI IPC477C embedded© Siemens AG 20109■ Ordering data Order No. Order No.Preferred versions with spare parts in exchange("Built to order" with delivery time of max. 15 working days andreplacement devices in exchange)SIMATIC HMI IPC477CembeddedE 6AV7 884- 7 A 7 77 - 777 0Without fan5 x USB 2.0 (500 mA), one ofwhich on the front1 x COM (RS232)24 V DC power supply withOn/Off switchFront panels• 12" TFT Touch 0• 15" TFT Touch 2• 19" TFT Touch 5Processors and fieldbus• Celeron M 1.2 GHz,A2 x PROFINET (IE)• Celeron M1 1.2 GHz,B2 x PROFINET (IE),1 x PROFIBUS DP 12• Core2Solo 1.2 GHz,D2 x PROFINET (IE)• Core2Solo 1.2 GHz,E2 x PROFINET (IE),1 x PROFIBUS DP 12• Core2Duo 1.2 GHz,G2 x PROFINET (IE)• Core2Duo 1.2 GHz,H2 x PROFINET (IE),1 x PROFIBUS DP 12Main memory (DDR3 RAM),1 database•2 GB 2Second mass storage(installed and formatted)• without 0• CompactFlash 2 GB 2• CompactFlash 4 GB 3• CompactFlash 8 GB 4• SSD (Solid State Drive)6min. 32 GBFirst mass storage (withpre-installed SIMATIC software)• CompactFlash 2 GB 2• CompactFlash 4 GB 3• CompactFlash 8 GB 4• SSD (Solid State Drive)6min. 32 GBOperating system• Windows Embedded 2009,pre-installed• Windows XP ProfessionalMulti-Language, only with SSD;without SIMATIC softwareE: Subject to export regulations: AL: N and ECCN: 5D002ENC3BD ASIMATIC HMI IPC477CembeddedE 6AV7 884- 7 A 7 7 7 - 777 0Software packages, only withCF 4 GB or higher• without SIMATIC softwareB A• with operating system and RTXB BWinAC RTX 2009 pre-installedand configured• with operating system and HMIWinCC flexible 2008 SP1 RT(incl. archives/recipes)pre-installed and configured- Number of tags 128 PT B C- Number of tags 512 PT B D- Number of tags 2048 PT B E- Number of tags 4096 PT B F• with operating system and HMIWinCC flexible 2008 SP1 RT(incl. archives/recipes)pre-installed and configured- Number of tags 128 PT B K- Number of tags 512 PT B L- Number of tags 2048 PT B M- Number of tags 4096 PT B NFurther bundles with SIMATIC HMI IPC477C andWinCC V7.0 SP1SIMATIC HMI IPC477Cwithout fan4 x USB 2.0 on rear,1 x USB 2.0 on front,2 x 10/100/1000 Mbit/s Ethernet(RJ45); software pre-installed onCF/SSD:Windows Embedded Standard,SIMATIC WinCC V7.0 SP1ClientE 6AV7 884- 7 AA10-4BX0Processor Celeron M 1.2 GHz,1 GB DDR3 RAM, CF Card 8 GB,RT license 128 PT on USB stick• 15" TFT Touch 2• 19" TFT Touch 5Client and Single Station E 6AV7 884- 7 AE20-4BX0Processor Core 2 Solo 1.2 GHz,PROFIBUS DP, 2 GB DDR3 RAM,CF Card 8 GB, RT license 128 PT• 15" TFT Touch 2• 19" TFT Touch 59/16 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC HMI IPC477C embedded■ Ordering data Order No. Order No.Further bundles with SIMATIC HMI IPC477C andWinCC V7.0 SP1 (continued)SIMATIC HMI IPC477C (cont.)Single StationE 6AV7 884- 7 AH30- 7 B 7 0Processor Core 2 Duo 1.2 GHz,PROFIBUS DP, 4 GB DDR3 RAM• 15" TFT Touch 2• 19" TFT Touch 5• 8 GB CF Card 4• 32 GB SSD 6• Runtime license 128 PTXon USB stick• Runtime license 2048 PTWon USB stickSIMATIC HMI IPC477C with E 6AV7 884- 7 AH20-4BP0WinAC RTX FProcessor Core2Duo 1.2 GHz,2 x PROFINET (IE),1 x PROFIBUS DP,2 GB DDR3 RAMCompactFlashCard plugged in(internal); 8 GB.Software pre-installed on CF CardRTX F: WinAC RTX F 2009• 12" TFT Touch 0• 12" TFT Key 1• 15" TFT Touch 2• 15" TFT Keys 3• 19" TFT Touch 5E: Subject to export regulations: AL: N and ECCN: 5D002ENC3Further HMI IPC477C and IPC477C PRO as "Built to Order"versions(max. delivery time is 15 working days and with identified repair).SIMATIC HMI IPC477C E 6AV7 884- 7 A 7 7 7 - 7 7 7 0embedded and without fan5 x (500 mA), one of which on thefront24 V DC power supply withOn/Off switchSIMATIC HMI IPC477C PRO E 6AV7 883- 7 A 7 7 7 - 7 7 7 0embedded and without fan, fullyenclosed according to IP655 x (500 mA), one of which on thefront24 V DC power supply withOn/Off switchFront panels12" TFT Touch0(not for PRO versions)12" TFT Keys1(not for PRO versions)15" TFT Touch2(not for PRO versions)15" TFT Keys3(not for PRO versions)19" TFT Touch5(not for PRO versions)15" TFT Touch6(IP65 enclosure; PRO)15" TFT Keys7(IP65 enclosure; PRO)Processors and fieldbus• Celeron M 1.2 GHz,A2 x PROFINET (IE)• Celeron M 1.2 GHz,B2 x PROFINET (IE),1 x PROFIBUS DP 12• Core2Solo 1.2 GHz,D2 x PROFINET (IE)• Core2Solo 1.2 GHz,E2 x PROFINET (IE),1 x PROFIBUS• Core2Solo 1.2 GHz,F1 x PROFINET (IE),1 x PROFINET (3 ports)• Core2Duo 1.2 GHz,G2 x PROFINET (IE)• Core2Duo 1.2 GHz,H2 x PROFINET (IE),1 x PROFIBUS• Core2Duo 1.2 GHz,J1 x PROFINET (IE),1 x PROFINET (3 ports)Main memory (DDR3 RAM),1 database•1 GB 1•2 GB 2•4 GB 39Siemens ST 70 N · 20109/17

Embedded/PC-based AutomationEmbedded AutomationSIMATIC HMI IPC477C embedded© Siemens AG 20109■ Ordering data Order No. Order No.Further HMI IPC477C and IPC477C PRO as "Built to Order"versions(max. delivery time is 15 working days and with identified repair).SIMATIC HMI IPC477C E 6AV7 884- 7 A 7 77 - 777 0embedded and without fan5 x (500 mA), one of which on thefront24 V DC power supply withOn/Off switchSIMATIC HMI IPC477C PRO E 6AV7 883- 7 A 7 77 - 777 0embedded and without fan, fullyenclosed according to IP655 x (500 mA), one of which on thefront24 V DC power supply withOn/Off switchSecond mass storage(installed and formatted)• without 0• CompactFlash 2 GB 2• CompactFlash 4 GB 3• CompactFlash 8 GB 4• SSD (Solid State Disk),6min. 32 GBMass storage (installed,Windows XP embedded(EN/DE) preinstalled, optionallywith SIMATIC software)• CompactFlash 2 GB 2• CompactFlash 4 GB 3• CompactFlash 8 GB 4• SSD (Solid State Disk),6min. 32 GBOperating systemWindows Embedded StandardB A2009 pre-installedWindows XP ProfessionalD AMulti-Language, only with SSD;without SIMATIC softwareE: Subject to export regulations: AL: N and ECCN: 5D002ENC3SIMATIC HMI IPC477C E 6AV7 884- 7 A 7 7 7 - 777 0embedded and without fan5 x (500 mA), one of which on thefront24 V DC power supply withOn/Off switchSIMATIC HMI IPC477C PRO E 6AV7 883- 7 A 7 7 7 - 777 0embedded and without fan, fullyenclosed according to IP655 x (500 mA), one of which on thefront24 V DC power supply withOn/Off switchSoftware packages with CF4 GB or higherwith operating system and RTXB BWindows XP embeddedpre-installed,WinAC RTX 2009pre-installed and configured forPROFIBUSwith operating system and HMIWindows XP embedded preinstalled,WinCC flexible 2008 SP1 RT(incl. archives/recipes)pre-installed and configured• Number of tags 128 PTB C• Number of tags 512 PTB D• Number of tags 2048 PTB E• Number of tags 4096 PTB Fwith operating system andHMI/RTX 1)Windows XP embedded preinstalled,WinCC flexible 2008 SP1 RT(incl. archives/recipes) andWinAC RTX 2009pre-installed and configured• Number of tags 128 PTB K• Number of tags 512 PTB L• Number of tags 2048 PTB M• Number of tags 4096 PTB N1) Not with Celeron M 1.2 GHz processor9/18 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC HMI IPC477C embedded■ Ordering data Order No. Order No.AcessoriesProtective membrane forPanel PCs 477/577/677For protecting the touch screenagainst dirt/scratches• for 12" Touch6AV7 671-2BA00-0AA0• for 15" Touch (not for PRO) 6AV7 671-4BA00-0AA0• for 19" Touch6AV7 672-1CE00-0AA0Labeling membranes for6AV7 672-0DA00-0AA0Panel PCs 477/577/677For labeling soft keys andfunction keys, blank, supplied insets of 10Touch pen C 6AV7 672-1JB00-0AA0Undetachable pen for operationof the touch devices, mounting ofthe support on the control cabinetor directly on the PRO unitExpansion componentsSIMATIC IPC DiagMonitor V4.1 A 6ES7 648-6CA04-1YX0Software tool for monitoringSIMATIC PCs,incl. manual, on CD-ROM(German/English)A: Subject to export regulations: AL: N and ECCN: EAR99SB: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HSIMATIC IPC Image & Partition A 6ES7 648-6AA03-0YA0Creator V3.0Software tool for preventive databackup and hard disk partitioningfor SIMATIC PCs, incl. manual onCD-ROM (German, English)SIMATIC IPC USB FlashDrive C 6ES7 648-0DC40-0AA02 GB, USB 2.0, metal enclosure,bootableSIMATIC IPC Service USB B 6AV7 672-8JD00-0AA0FlashDrive2 GB, USB 2.0, metal enclosure,bootableWith: Image & Partition Creatorready-installed, incl. CD3.5" USB disk drive C 6FC5 235-0AA05-1AA2with 1 m connecting cableIndustrial USB Hub 4 C 6AV6 671-3AH00-0AX04 x USB 2.0, IP65 for controlcabinet door or DIN railCompact Flash Card•2 GB C 6ES7 648-2BF02-0XF0•4 GB C 6ES7 648-2BF02-0XG0•8 GB C 6ES7 648-2BF02-0XH0Please note:The HMI IPC477C is delivered as standard with an insertedCF card. The licenses are on the supplied USB stick.Note:Further embedded versions based on IPC427C and EmbeddedController (mEC) are listed under SIMATIC PC based Control.9Siemens ST 70 N · 20109/19

Embedded/PC-based AutomationEmbedded AutomationSIMATIC Panel PC 477B Bundles© Siemens AG 20109■ OverviewSIMATIC Panel PC 477B-HMI, 477B-RTX and 477B-HMI/RTX• Quick start in automation solutions with Embedded Automation- SIMATIC WinCC flexible RT preinstalled and ready to switchon (Panel PC 477B HMI) or SIMATIC WinCC flexible andSIMATIC WinAC RTX preinstalled and ready to switch on(Panel PC 477B HMI/RTX)- PROFIBUS and Industrial Ethernet pre-configured for use ina SIMATIC environment- Configuration and programming with SIMATIC WinCCflexible ES and SIMATIC STEP 7 via Industrial Ethernet,PROFINET, or PROFIBUS• Rugged operation- Hard-disk-free operation based on Compact Flash card(from 2 GB CF card) and Windows XP embedded- Operation without fan• Flexibility of a PC-based automation environment- Open for additional PC applications- Can be expanded with PC/104+ cards- Connection option for USB devices, flat panel monitor orscreen- Use of WinAC ODK with SIMATIC WinAC RTX• Data retention for WinAC RTX without uninterruptible powersupply (UPS)■ Technical specificationsGeneral featuresProcessorMemory typeMain memoryFree slotsOperating systemAdditional OS informationSIMATIC Software6ES7 676 and 6AV7 85Intel Pentium M technology;Intel Celeron M 1.0 GHz,Intel Pentium M 1.4 GHzDDR2-RAM1 GB, 2 GB3 x PC/104 (over spec. expansion frame)Windows XP EmbeddedLanguage: EN/DEOptional with pre-installed bundlesoftware SIMATIC WinCC flexible 2008 orWinCC flexible/WinAC RTX 2008DrivesFloppy driveOptical drivesHard disk/mass storageInterfacesGraphics interfaceConnection forkeyboard/mouseSerial interfacePROFIBUS/MPIPROFINET6ES7 676 and 6AV7 85Optional via external USB floppy drivePossible as external drive via USBCompact Flash Drive with 2 GB or 4 GBDVI-I can be used for additional displayunit (only VGA via adapter); color depth32 bits, graphics memory up to 128 MB,resolution as integral display in eachcaseUSB / USBCOM1: 1 x V.24 (RS232)Onboard, floating, max. 12 Mbit/s,no plug-in card required, CP5611-compatible, not upgradeable3 x RJ45, CP1616-compatible; notupgradeableUSB 1x on the front, 4x on rear, USB 2.0(500mA)Ethernetonboard, 2 x 10/100/1000 Mbit(RJ45 with/without PROFIBUS),1 x 10/100/1000 Mbit (RJ45 withPROFINET, 3 ports), no plug-in cardrequiredMultimediaNoSupply voltageSupply voltage24 V DCMonitoring functionsTemperatureYesWatchdogYesStatus LEDsYes (on rear)Front side according toEN 60529Ambient conditionsVibration load duringoperationShock loading duringoperationRelative humidityMaximum permissibleinstallation angle +/-Ambient temperature duringoperationCertifications & standardsApprovalsIP65 (on the front) according toEN60529 and NEMA4Tested in accordance withDIN IEC 60068-2-6: 10 … 58 Hz:0.075 mm, 58 … 200 Hz: 9.8 m/s² (1 g)Tested in accordance withDIN IEC 60068-2-7: 50 m/s² (5 g), 30 ms,100 shocksTested in accordance withDIN IEC 60068-78, DIN IEC 68-2-30:5 … 80% at 25 °C (no condensation)30° over vertical+5 °C … +50 °C in maximum configuration;no fanCE, cULus(508)EMC CE, 55022A, EN 61000-6-4,EN 61000-6-29/20 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC Panel PC 477B Bundles■ Technical specifications (continued)6ES7 676-16AV7 8516ES7 676-26AV7 8526ES7 676-36AV7 8536ES7 676-46AV7 8546ES7 676-66AV7 856Front panel 12" TFT Touch 12" TFT Key 15" TFT Touch 15" TFT Key 19" TFT TouchDisplayResolution (W x H in pixels) 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024MTBF backlit display(at 25 °C)50000 h at 24 hcontinuous operation,temperature-dependent50000 h at 24 hcontinuous operation,temperature-dependent50000 h at 24 hcontinuous operation,temperature-dependent50000 h at 24 hcontinuous operation,temperature-dependent50000 h at 24 hcontinuous operation,temperature-dependentType of operationFunction keys No 36 No 36 NoAlphanumeric keyboard No Yes No Yes NoTouch screenYes No Yes No Yes(analog/resistive)Mouse on the front No Yes No Yes NoDesignCentralized configuration Yes Yes Yes Yes YesDistributed configuration No No No No NoDimensionsMounting dimensions of the 368 x 290 x 75 450 x 290 x 75 450 x 290 x 75 450 x 321 x 75 450 x 380 x 88centralized configuration(W x H x D, without opticaldrive) in mmOperator control unit 400 x 310 (7 HU) 483 x 310 (19", 7 HU) 483 x 310 (19", 7 HU) 483 x 355 (19", 8 HU) 483 x 400 (19", 9 HU)(W x H) in mmWeightsPanel PC in a centralized 7.3 kg 7.7 kg 8.3 kg 8.7 kg 14.3 kgconfiguration approx.General featuresAccessories Touch cover foils Insertable strips for Touch cover foils Insertable strips for Touch cover foilskeyboardkeyboardPower loss in maximum 24 V DC: max. 70 W 24 V DC: max. 70 W 24 V DC: max. 70 W 24 V DC: max. 70 W 24 V DC: max. 90 W,configuration(contains 3 W per slot) (contains 3 W per slot) (contains 3 W per slot) (contains 3 W per slot) (contains 3 W per slot)9Siemens ST 70 N · 20109/21

Embedded/PC-based AutomationEmbedded AutomationSIMATIC Panel PC 477B Bundles© Siemens AG 20109■ Ordering data Order No. Order No.Versions for "Embedded Automation", TIA applications(preferred versions from stock)SIMATIC Panel PC 477B E 6ES7 676- 7 BA00-0 7 7 0embeddedCeleron M 1.0 GHz processor,main memory 1 GB DDR2SDRAM,power supply 24 V DC,PROFIBUS DP interfaceFront panels• 12" TFT Touch 1• 12" TFT Key 2• 15" TFT Touch 3• 15" TFT Key 4• 19" TFT Touch 6Mass storage• CompactFlash 2 GBC• CompactFlash 4 GBD• With Windows XP embeddedAoperating system (EN/DE)preinstalled• With operating system and RTX,BWindows XP embedded(EN/DE) preinstalled,WinAC RTX 2008 preinstalledand configured for PROFIBUS(DP)• With operating system and HMI(DP/PN),Windows XP embedded preinstalled,WinCC flexible 2008 RT (incl.archives/recipes) preinstalled- Number of tags 128 PT C- Number of tags 512 PT D- Number of tags 2048 PT E• With operating system andHMI/RTX (DP)Windows XP embeddedpreinstalled,WinCC flexible 2008 RT (incl.archives/recipes) preinstalled,WinAC RTX 2008 preinstalledand configured for PROFIBUS- Number of tags 128 PT F- Number of tags 512 PT G- Number of tags 2048 PT HE: Subject to export regulations: AL: N and ECCN: 5D002ENC3Further Panel PCs as "built to order" versions(max. delivery time 15 working days)SIMATIC Panel 477B embedded E 6AV7 85 7 - 0 A 7 77 - 77A 024 V DC power supplyFront panels• 12" TFT Touch 1• 12" TFT Key 2• 15" TFT Touch 3• 15" TFT Key 4• 19" TFT Touch 6Processor• Celeron M 1.0 GHzD• Celeron M 1.0 GHz withEPROFIBUS DB12• Celeron M 1.0 GHz withFPROFINET• Pentium M 1.4 GHzG• Pentium M 1.4 GHz withHPROFIBUS DB12• Pentium M 1.4 GHz withJPROFINETMain memory• 1 GB DDR2 SDRAM 2• 2 GB DDR2 SDRAM 3Second CompactFlash slotfitted (externally accessible)- Not fitted 0- With CF card 2 GB 3- With CF card 4 GB 4Software packagesWith Windows XP embeddedoperating system (EN/DE)preinstalled• With CF card 2 GB3B• With CF card 4 GB4BWith operating system and RTXWindows XP embedded (EN/DE)preinstalled, WinAC RTX 2008preinstalled and preconfigured• With CF card 2 GB 3• With CF card 4 GB 4• WinAC RTX (DP) configured forCPROFIBUS• WinAC RTX (PN) configured forKPROFINETWith operating system and HMI(DP/PN),Windows XP embedded preinstalled,WinCC flexible 2008 RT (incl.archives/recipes) preinstalled• With CF card 2 GB 3• With CF card 4 GB 4• Number of tags 128 PTD• Number of tags 512 PTE• Number of tags 2048 PTF9/22 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC Panel PC 477B Bundles■ Ordering data Order No. Order No.Further Panel PCs as "built to order" versions (continued)(max. delivery time 15 working days)SIMATIC Panel 477B embedded E 6AV7 85 7 - 0 A 7 7 7 - 77A 024 V DC power supplyWith operating system andHMI/RTX (DP)Windows XP embedded preinstalled,WinCC flexible 2008 RT(incl. archives/recipes) preinstalled,WinAC RTX 2008 preinstalledand configured forPROFIBUS• With CF card 2 GB 3• With CF card 4 GB 4• Number of tags 128 PT• Number of tags 512 PT• Number of tags 2048 PT• With operating system andHMI/RTX (PN)Windows XP embedded preinstalled,WinCC flexible 2008 RT(incl. archives/recipes) preinstalled,WinAC RTX 2008 preinstalledand configured forPROFINET• With CF card 2 GB 3• With CF card 4 GB 4• Number of tags 128 PT• Number of tags 512 PT• Number of tags 2048 PTAccessoriesProtective membrane forPanel PCs 477/577/677/877For protecting the touch screenagainst dirt/scratches• for 12" Touch• for 15" Touch• for 19" TouchLabeling membranes forPanel PCs 477/577/677/877For labeling soft keys andfunction keys, blank, supplied insets of 106AV7 671-2BA00-0AA06AV7 671-4BA00-0AA06AV7 672-1CE00-0AA06AV7 672-0DA00-0AA0GHJLMNTouch pen C 6AV7 672-1JB00-0AA0Captive pen for operation of thetouch devices, mounting of thesupport on the control cabinetExpansion componentsSIMATIC IPC DiagMonitor V4.0 A 6ES7 648-6CA04-0YX0Software tool for monitoringSIMATIC PCs,incl. manual, on CD-ROM(German/English)SIMATIC IPC Image & Partition A 6ES7 648-6AA03-0YA0Creator V3.0Software tool for preventive databackup and hard disk partitioningfor SIMATIC PCs, incl. manual onCD-ROM (German, English)SIMATIC IPC USB FlashDrive C 6ES7 648-0DC40-0AA02 GB, USB 2.0, metal enclosure,bootableSIMATIC IPC Service USB B 6AV7 672-8JD00-0AA0FlashDrive2 GB, USB 2.0, metal enclosure,bootableImage & Partition Creator readyinstalled,incl. CD3.5" USB disk drive C 6FC5 235-0AA05-1AA2With 1 m connecting cableIndustrial USB Hub 4 C 6AV6 671-3AH00-0AX04 x USB 2.0, IP65 for controlcabinet door or DIN railCompact Flash Card•2 GB C 6ES7 648-2BF01-0XF0•4 GB C 6ES7 648-2BF01-0XG0Expansion kit PC/104 C 6AG4 070-0BA00-0XA0For integration of PC/104 modules(packing unit contains 6 expansionframes)Please note:The scope of supply of the Panel PC 477B mainly comprises thePanel PC and a software pack that contains the CompactFlashcard with preinstalled and configured software as well as all thenecessary license keys. After the CompactFlash card has beeninserted in the (internal) slot provided, the unit is ready forswitching on.9A: Subject to export regulations: AL: N and ECCN: EAR99SB: Subject to export regulations: AL: N and ECCN: EAR99TC: Subject to export regulations: AL: N and ECCN: EAR99HE: Subject to export regulations: AL: N and ECCN: 5D002ENC3Note:Other complete turnkey solutions (the software is alreadyinstalled and configured) on Microbox PC basis can be foundunder SIMATIC PC based Control.Siemens ST 70 N · 20109/23

Embedded/PC-based AutomationEmbedded AutomationSIMATIC WinAC MP© Siemens AG 2010■ Overview• WinAC MP, the software PLC based on Windows CE• An optimized version is available for all current MP platforms• The economical solution for all applications in combinationwith a rugged hardware platform• Ideal for tasks on the machine level, saves space and costs• Best service concept, backup/restore of all data on a standardSD card, standard Multi Media Card or standard USB stick9■ Technical specificationsProduct typedesignationMemoryWork memory6ES7 671-4EE00-0YA0WinACMP 1776ES7 671-5EF01-0YA0WinACMP 2776ES7 671-7EG01-0YA0WinACMP 377• integrated 128 Kibyte 256 Kibyte 512 Kibyte• expandable No No NoLoad memory• integrated RAM, max. 8Mbyte 8Mbyte 8MbyteCPU/ blocksDB• Number, max. 512;FBs+FCs+DBs=5121 024;FBs+FCs+DBs=10242048;FBs+FCs+DBs=2048• Size, max. 64 Kibyte 64 Kibyte 64 KibyteFB• Number, max. 512;FBs+FCs+DBs=5121 024;FBs+FCs+DBs=10242048;FBs+FCs+DBs=2048• Size, max. 64 Kibyte 64 Kibyte 64 KibyteFC• Number, max. 512;FBs+FCs+DBs=5121 024;FBs+FCs+DBs=10242048;FBs+FCs+DBs=2048• Size, max. 64 Kibyte 64 Kibyte 64 KibyteOB• Number, max. 18 18 18• Size, max. 64 Kibyte 64 Kibyte 64 KibyteNesting depth• per priority class 8 8 16• additional within an 2 2 2error OBTimes/counters andtheir retentivityS7 counter• Number 128 256 512Product typedesignationS7 counter6ES7 671-4EE00-0YA0WinACMP 1776ES7 671-5EF01-0YA0WinACMP 277• of which retentivewithout battery- can be set Yes Yes Yes- lower limit 0 0 0- upper limit 127 255 511• Retentivity- can be set Yes Yes Yes- preset 8 8 8• Counting range- lower limit 0 0 0- upper limit 999 999 999IEC counter• presentYes; SFB0,SFB1, SFB2Yes; SFB0,SFB1, SFB26ES7 671-7EG01-0YA0WinACMP 377Yes; SFB0,SFB1, SFB2S7 times•Number 128 256 512• of which retentivewithout battery- can be set Yes Yes Yes- lower limit 0 0 0- upper limit 127 255 511• Retentivity- can be set Yes Yes Yes- preset 0 0 0• Time range- lower limit 10 ms 10 ms 10 ms- upper limit 9 990 s 9990s 9 990 sIEC timer• presentYes; SFB3,SFB4, SFB5Yes; SFB3,SFB4, SFB5Yes; SFB3,SFB4, SFB5Data areas and theirretentivityretentive data area intotal (incl. times,counters, flags), max.64 Kibyte 128 Kibyte 256 Kibyte9/24 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC WinAC MP■ Technical specifications (continued)Product typedesignationFlag6ES7 671-4EE00-0YA0WinACMP 1776ES7 671-5EF01-0YA0WinACMP 2776ES7 671-7EG01-0YA0WinACMP 377• Number, max. 2 Kibyte 2 Kibyte 4 Kibyte• Retentivity available Yes Yes YesData blocks• Number, max. 512 1 024 2048• Size, max. 64 Kibyte 64 Kibyte 64 KibyteLocal data• per priority class, max. 16 384 byte;for all priorityclassesAddress areaI/O address area16 384 byte;for all priorityclasses16 384 byte;for all priorityclasses• overall 2 Kibyte 4 Kibyte 8 Kibyte•Outputs 2 Kibyte 4 Kibyte 8 KibyteProcess image• Inputs 1 Kibyte 2 Kibyte 2 Kibyte•Outputs 1 Kibyte 2 Kibyte 2 Kibyte• Inputs, adjustable 1 Kibyte 2 Kibyte 2 Kibyte• Outputs, adjustable 1 Kibyte 2 Kibyte 2 Kibyte• Inputs, default 512 byte 512 byte 512 byte• Outputs, default 512 byte 512 byte 512 byte• consistent data, max. 32 byte 32 byte 32 byteHardwareconfigurationNumber of DP masters• integrated 1 1 1Time of dayRuntime meter• Number 8 8 8•Number/0 to 7 0 to 7 0 to 7Number rangeS7 message functionsProcess diagnostic Yes Yes YesmessagesTest commissioningfunctionsStatus/control• Status/control variable Yes; Status Yes; Status Yes; Statusblocks, single blocks, single blocks, singlestep, breakpointstep, breakpointstep, breakpointForcing• Forcing No No NoDiagnostic buffer• present Yes Yes Yes• Number of entries,max.1 000;preset 1201 000;preset 1201000;preset 120- can be set Yes Yes YesProduct typedesignationCommunicationfunctionsNumber of logicalconnections (also innetwork), max.6ES7 671-4EE00-0YA0WinACMP 1776ES7 671-5EF01-0YA0WinACMP 2778 16 326ES7 671-7EG01-0YA0WinACMP 377PG/OP communication Yes Yes YesRouting Yes Yes YesGlobal data communication• supported No No NoS7 basic communication• supported No No NoS7 communication• supportedYes;PUT/GET,Yes;PUT/GET,Yes;PUT/GET,BSEND/BRCV, BSEND/BRCV, BSEND/BRCV,USEND/URCV USEND/URCV USEND/URCV• as server Yes Yes Yes• as client Yes Yes Yes• User data per job, max. 480 byte 480 byte 480 byteNumber of connections• overall 8;(max. 8 DP,restPROFINET)• usable forPG communication- reserved forPG communication• usable forOP communication- reserved forOP communication16;(max. 8 DP,restPROFINET)1 1 11 1 132;(max. 8 DP,restPROFINET)• usable for routing 6 14 301st interfaceDP master• Number of connections,4 8 8max.• Services- PG/OP communicationYes Yes Yes- Routing Yes Yes Yes- Global data communicationNo No No- S7 basic communicationNo No No- S7 communication Yes Yes Yes- Equidistance mode No No Nosupport- SYNC/FREEZE Yes Yes Yes- Activation/deactivationYes Yes Yesof DP slaves-DPV1 Yes Yes Yes• Transmission speeds,max.12 Mbit/s 12 Mbit/s 12 Mbit/s9Siemens ST 70 N · 20109/25

Embedded/PC-based AutomationEmbedded AutomationSIMATIC WinAC MP© Siemens AG 20109■ Technical specifications (continued) ■ Ordering data Order No.Product typedesignationDP master• Number of DP slaves,max.6ES7 671-4EE00-0YA0WinACMP 1776ES7 671-5EF01-0YA0WinACMP 27732 32 326ES7 671-7EG01-0YA0WinACMP 377• Address area- Inputs, max. 2 Kibyte 4 Kibyte 8 Kibyte-Outputs, max. 2 Kibyte 4 Kibyte 8 KibyteCPU/ programmingConfiguration software• STEP 7• WinCC flexibleCompact• WinCC flexibleStandard• WinCC flexibleAdvancedYes;STEP7 V5.4SP4 or higherYes; WinCCflexible 2008SP1Yes; WinCCflexible 2008SP1Yes; WinCCflexible 2008SP1Yes;STEP7 V5.4SP4 or higherNoYes; WinCCflexible 2008SP1Yes; WinCCflexible 2008SP1Programming language•LAD Yes Yes Yes•FBD Yes Yes Yes•STL Yes Yes Yes•SCL Yes Yes Yes•CFC Yes Yes YesSoftware libraries• Process diagnostics Yes;System errormessagesYes;System errormessages,ProAgent(S7-Graph)Yes;STEP7 V5.4SP4 or higherNoYes; WinCCflexible 2008SP1Yes; WinCCflexible 2008SP1Yes;System errormessages,ProAgent(S7-Graph)Cycle time monitoring• can be set Yes Yes Yes• preset 6 000 ms 6 000 ms 6000msOperating systemsOperating system• Windows CEYes; Version5.0 or higherYes; Version5.0 or higherYes; Version5.0 or higherOnline languagesNumber 1; English 1; English 1; EnglishWinAC MP,6ES7 671-4EE00-0YA0version WinAC MP 177 2)incl. a Single License for MP 177on USB stick 1) and electronicdocumentationWinAC MP,6ES7 671-5EF01-0YA0version WinAC MP 277 2)incl. a Single License for MP 277on USB stick 1) and electronicdocumentationWinAC MP,6ES7 671-7EG01-0YA0version WinAC MP 377 2)incl. a Single License for MP 377on USB stick 1) and electronicdocumentationComplete pre-assembledpackagesPackage MP 177 6" Touch E 6AV6 652-2JC01-2AA0• MP 177 6" Touch• WinAC MP Version 177• Electronic documentation• Single License for MP 177 onUSB flash drive 1)• Standard SD card 256 MB(empty)Package MP 277 8" Touch E 6AV6 652-3MC01-1AA0• MP 277 8" Touch• WinAC MP Version 277• Electronic documentation• Single License for MP 277 onUSB stick 1)• Standard SD card 256 MB(empty)Package MP 277 8" Key E 6AV6 652-3LC01-1AA0• MP 277 8" Key• WinAC MP Version 277• Electronic documentation• Single License for MP 277 onUSB stick 1)• Standard SD card 256 MB(empty)Package MP 277 10" Touch E 6AV6 652-3PC01-1AA0• MP 277 10" Touch• WinAC MP Version 277• Electronic documentation• Single License for MP 277 onUSB stick 1)• Standard SD card 256 MB(empty)Package MP 277 10" Key E 6AV6 652-3NC01-1AA0• MP 277 10" Key• WinAC MP Version 277• Electronic documentation• Single License for MP 277 onUSB stick 1)• Standard SD card 256 MB(empty)1) Can only be used for license handling2) UCL version on requestE: Subject to export regulations: AL: N and ECCN: 5D002ENC39/26 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationEmbedded AutomationSIMATIC WinAC MP■ Ordering data Order No. Order No.Package MP 377 12" Touch E 6AV6 652-4FC01-2AA0• MP 377 12" Touch• WinAC MP Version 377• Electronic documentation• Single License for MP 377 onUSB stick 1)• Standard SD card 256 MB(empty)Package MP 377 12" Key E 6AV6 652-4EC01-2AA0• MP 377 12" Key• WinAC MP Version 377• Electronic documentation• Single License for MP 377 onUSB stick 1)• Standard SD card 256 MB(empty)Package MP 377 15" Touch E 6AV6 652-4GC01-2AA0• MP 377 15" Touch• WinAC MP Version 377• Electronic documentation• Single License for MP 377 onUSB stick 1)• Standard SD card 256 MB(empty)Package MP 377 19" Touch E 6AV6 652-4HC01-2AA0• MP 377 19" Touch• WinAC MP Version 377• Electronic documentation• Single License for MP 377 onUSB stick 1)• Standard SD card 256 MB(empty)Starter packagesStarter package 613 WinAC MP E 6AV6 652-2JD01-2AA0• SIMATIC MP 177 6" Touch withinstallation accessories,mounting seal, power supplyconnector• SIMATIC WinAC MP incl.Single License on USB flashdrive and electronic documentation• SD card 256 KB (empty)• ET 200M incl.• 16 DI, 16 DO, 8 AI, 2 AO• FM 350-2 8-channel counter• Front connector, bus connector,and mounting railStarter package 635TWinAC MP• SIMATIC MP 177 6" Touch withinstallation accessories,mounting seal, power supplyconnector• SIMATIC WinAC MP incl. SingleLicense on USB flash drive andelectronic documentation• SD card 256 KB (empty)• ET 200M incl.32 DI, 16 DO, 8 AI, 2 AO• FM 350-2 8-channel counter• Front connector, bus connector,and mounting railStarter package 635KWinAC MP• SIMATIC MP 277 8" Key withinstallation accessories,mounting seal, power supplyconnector• SIMATIC WinAC MP incl. SingleLicense on USB flash drive andelectronic documentation• SD card 256 KB (empty)• ET 200M incl.32 DI, 16 DO, 8 AI, 2 AO• FM 350-2 8-channel counter• Front connector, bus connector,and mounting railStarter package 636KWinAC MP• SIMATIC MP 277 8" Key withinstallation accessories,mounting seal, power supplyconnector• SIMATIC WinAC MP incl. SingleLicense on USB flash drive andelectronic documentation• SD card 256 KB (empty)• ET 200M incl.32 DI, 16 DO, 8 AI, 2 AO• Front connector, bus connector,and mounting railStarter package 636TWinAC MP• SIMATIC MP 277 10" Touch withinstallation accessories,mounting seal, power supplyconnector• SIMATIC WinAC MP incl. SingleLicense on USB flash drive andelectronic documentationEEEE6AV6 652-2JD01-2AA16AV6 652-3LD01-1AA16AV6 652-3LD01-1AA06AV6 652-3PD01-1AA09• SD card 256 KB (empty)• ET 200M incl.32 DI, 16 DO, 8 AI, 2 AO• Front connector, bus connector,and mounting railE: Subject to export regulations: AL: N and ECCN: 5D002ENC31) Can only be used for license handlingSiemens ST 70 N · 20109/27

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX© Siemens AG 20109■ Overview• SIMATIC WINAC RTX:Optimized for applications that require a high degree of flexibilityand integration capability.• The software solution for tasks that require hard deterministicbehavior and high performance.• With real-time expansion for assuring deterministic behaviorfor the control section.New with WinAC RTX 2009:• Hardware support for the new Embedded PC platformsSIMATIC IPC427C and SIMATIC HMI IPC477C for PROFINETand retentivity■ Technical specifications6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009Product versionHardware product version -Firmware version 4.5associated programming package STEP7 V5.4 SP4 or higher+ HW update /iMap V3.0 SP1MemoryWork memory• integrated (for program) 4 Mbyte; Adjustable; depends onNon Paged Memory Pool• integrated (for data)4 Mbyte; Adjustable; depends onNon Paged Memory PoolLoad memory• integrated RAM, max.Adjustable; depends onNon Paged Memory PoolCPU/ blocksDB• Number, max. 65 535;Limited only by RAM set for data• Size, max.64 KibyteFB• Number, max. 65 536;Limited only by RAM set for code• Size, max.64 Kibyte6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009FC• Number, max. 65 536;Limited only by RAM set for code• Size, max.64 KibyteOB• Number, max.Limited only by RAM set for code• Size, max.64 Kibyte• Number of free cycle OBs 1; OB 1• Number of time alarm OBs 1; OB 10• Number of delay alarm OBs 1; OB 20• Number of watchdog interrupts 9; OB 30-38• Number of process alarm OBs 1; OB 40• Number of ODK OBs 3; OB 52-54• Number of DPV1 alarm OBs 3; OB 55-57• Number of isochronous mode 2; OB 61-62OBs• Number of startup OBs 2; OB 100, 102• Number of asynchronous error 7; OB 80, 82-85, 86, 88OBs• Number of synchronous error 2; OB 121, 122OBsNesting depth• per priority class 24• additional within an error OB 24CPU/ processing timesfor bit operations, min.0.004 µs; typ.for fixed point arithmetic, min. 0.003 µs; typ.for floating point arithmetic, min. 0.004 µs; typ.Reference platformPentium IV, 2.4 GHzTimes/counters and theirretentivityS7 counter• Number 2 048• Retentivity- can be set Yes- lower limit 0- upper limit 2 047- preset 8• Counting range- can be set Yes- lower limit 0- upper limit 999IEC counter• presentYes• TypeSFBS7 times• Number 2 048• Retentivity- can be set Yes- lower limit 0- upper limit 2 047- preset 0• Time range- lower limit 10 ms- upper limit 9 990 s9/28 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX■ Technical specifications (continued)6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009IEC timer• present• TypeData areas and their retentivityRetentivity without UPS andPS Extension BoardYesSFB128 KB with SIMATIC IPC427Cand HMI IPC477C; furtherSIMATIC PCs on requestall dataRetentivity with UPSFlag• Number, max.16 Kibyte• of which retentive MB 0 to MB 16383• Retentivity preset MB 0 to MB 15• Number of clock memories 8Local data• adjustable, max.32 Kibyte• preset16 Kibyte• per priority class, max.32 KibyteAddress areaI/O address area• overall16 Kibyte•Outputs16 Kibyte• of which, distributed- DP interface, inputs 16 Kibyte- DP interface, outputs 16 Kibyte- PN interface, inputs 16 Kibyte- PN interface, outputs 16 KibyteProcess image• Inputs, adjustable8 Kibyte• Outputs, adjustable8 Kibyte• Inputs, default512 byte• Outputs, default512 byteSubprocess images• Number of subprocess images, 15max.Digital channels• Inputs 128 000•Outputs 128 000Analog channels• Inputs 8 000•Outputs 8 000Hardware configurationSubmodules• Number of submodules, max 4• of which PROFIBUS, max. 4; Supported interfaces:see 1st and 2nd interface• of which Industrial Ethernet, max. 1; Supported interfaces:see 3rd and 4th interfaceNumber of operable FMs and CPs(recommended)•FM FM distributed: FM 350-1 / 350-2,FM 351, FM 352, FM 353,FM 355 / 355-2• CP, point-to-point2; CP 340, CP 341 distributed6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009Number of operable FMs and CPs(recommended)• CP, LANOver PC CPTime of dayClock• Hardware clock (real-time clock) Yes• battery-backed and synchronizableYesRuntime meter• Number 8Clock synchronization• supportedYes• to PC-CP, slaveYes• on Ethernet via NTPYesS7 message functionsNumber of login stations for 62message functions, max.SCAN procedureNoProcess diagnostic messages Yes; ALARM_S, ALARM_SQ,ALARM_D, ALARM_DQsimultaneously active Alarm-S 20; of a total of 20 for all SFCsblocks, max.Alarm 8-blocksYes• Number of instances for alarm 8 600and S7 communication blocks,max.Process control messages NoTest commissioning functionsStatus/control• Status/control variableYesForcing• ForcingNoStatus blockYesSingle stepYesDiagnostic buffer• presentYes• Number of entries, max. 3 200preset 120Communication functionsPG/OP communicationYesData record routingNoGlobal data communication• supportedNoS7 basic communication• supportedNoS7 communication• supportedYes• as serverYes• as clientYes• User data per job, max.64 Kibyte; Depends on whichblock is used:BSEND/USEND or PUT/GET9Siemens ST 70 N · 20109/29

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX© Siemens AG 20109■ Technical specifications (continued)6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009Web server• Web serverOpen IE communication• TCP/IPYes- Number of connections, max. Dependent on interface- Data length, max. 65 534 byte• ISO-on-TCP (RFC1006)•UDPYes- Number of connections, max. Dependent on interface- Data length, max. 1 472 byteNumber of connectionsNoNo• overall 64• usable for PG communication- reserved for PG communication 1• usable for OP communication- reserved for OP communication 1PROFINET CBA (at set setpointcommunication load)• Setpoint for the20 %CPU communication load• Number of remote interconnectionpartners64• Number of functions,30master/slave• Total of all Master/Slave connections1 000• Data length of all incoming 6 800 byteconnections master/slave, max.• Data length of all outgoing 6 800 byteconnections master/slave, max.• Number of device-internal and 500PROFIBUS interconnections• Data length of device-internal and 4 000 bytePROFIBUS interconnections,max.• Data length per connection, max. 1 400 byte• Remote interconnections withacyclic transmission- Sampling frequency: Sampling 500 mstime, min.- Number of incoming interconnections100- Number of outgoing interconnections100- Data length of all incoming interconnections,max.2 000 byte- Data length of all outgoing interconnections,max.2 000 byte- Data length per connection, 1 400 bytemax.• Remote interconnections withcyclic transmission- Transmission frequency: 10 msTransmission interval, min.- Number of incoming interconnections200- Number of outgoing interconnections2006ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009PROFINET CBA (at set setpointcommunication load)• Remote interconnections withcyclic transmission- Data length of all incoming 4 800 byteinterconnections, max.- Data length of all outgoing 4 800 byteinterconnections, max.- Data length per connection, 250 bytemax.• HMI variables via PROFINET(acyclic)- Number of stations that can 3log on for HMI variables(PN OPC/iMap)- HMI variable updating 500 ms- Number of HMI variables 200- Data length of all HMI variables, 2 000 bytemax.• PROFIBUS proxy functionality- supported Yes- Number of linked PROFIBUS 16devices- Data length per connection, 240 byte; Slave-dependentmax.1st interfaceType of interfaceCP 5611-A2, CP 5621, integratedPB interface of the SIMATIC PCMax. no. of simultaneously 1operable CPsPhysicsRS 485 / PROFIBUSIsolatedYesPower supply to interface does not exist(15 to 30 V DC), max.Functionality•MPINo• DP masterYes• DP slaveNoDP master• Number of connections, max. 8• Services- PG/OP communication Yes- Routing Yes- Global data communication No- S7 basic communication No- S7 communication Yes- Equidistance mode support Yes; Only in conjunction withisochronous mode- Isochronous mode Yes- SYNC/FREEZE Yes- Activation/deactivation of DP Yesslaves- Direct data exchange (slave-toslavecommunication)Yes-DPV0Yes-DPV1Yes• Transmission speeds, max. 12 Mbit/s• Number of DP slaves, max. 649/30 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX■ Technical specifications (continued)6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009DP master• Address area- Inputs, max. 16 Kibyte-Outputs, max.16 Kibyte• User data per DP slave- Inputs, max. 244 byte-Outputs, max.244 byte2nd interfaceType of interface CP 5613, CP 5613-A2, CP 5603Max. no. of simultaneously 4operable CPsPhysicsRS 485 / PROFIBUSIsolatedYesFunctionality•MPINo•DP masterYes• DP slaveNoDP master• Number of connections, max. 50• Services- PG/OP communication Yes- Routing Yes- Global data communication No- S7 basic communication No- S7 communication Yes- Equidistance mode support Yes; Only in conjunction withisochronous mode- Isochronous mode Yes- SYNC/FREEZE Yes- Activation/deactivation of DP Yesslaves- Direct data exchange (slave-toslaveYescommunication)-DPV0Yes-DPV1Yes• Transmission speeds, max. 12 Mbit/s• Number of DP slaves, max. 125• Address area- Inputs, max. 16 Kibyte-Outputs, max.16 Kibyte• User data per DP slave- Inputs, max. 244 byte-Outputs, max.244 byte3rd interfaceType of interfacePROFINETMax. no. of simultaneouslyoperable CPsPhysicsIsolatedautomatic detection of transmissionspeed1; Intel Pro/1000 (Intel 82571EB,82573L, 82574L, 82541PI;non shared IRQ required);integrated IE interfaceSIMATIC PC 4x7B, 6x7B, 8x7Band IPC4x7CEthernetYesYes; 10/100 Mbit/s6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009Functionality• PROFINET IO Controller Yes• PROFINET IO DeviceNo• PROFINET CBAYes• Open IE communication Yes• Web serverNoPROFINET IO Controller• Services- PG/OP communication Yes- Routing Yes; S7 routing- S7 communication Yes- Open IE communication Yes• Transmission speeds, min. 100 Mbit/s• Transmission rate, max.100 Mbit/s• Total number of connectable 128IO Devices, max.• IRT, supportedNo• Prioritized startup supported Yes- Number of IO Devices, max. 32• Activation/deactivation of IO YesDevices- Number of IO Devices that can 8be simultaneously activated/deactivated, max.• IO Devices changing during Yesoperation (partner ports),supported• Device replacement without Yesswap medium• Send clock times1 ms•Updating time1 - 512 ms (minimum valuedepends on communication shareset for PROFINET I/O, on thenumber of I/O devices, and on thevolume of configured user data)• Address area- Inputs, max. 16 Kibyte- Outputs, max. 16 Kibyte• User data per address area, max. 2kbyte- User data consistency, max. 256 byteSIMATIC communication• PG/OP communicationYes• S7 routingYes• S7 communicationYes• Number of connections, max. 16Open IE communication• Open IE communication, Yessupported• Number of connections, max. 32• Local port numbers used at thesystem end0, 20, 21, 23, 25, 80, 102, 135,161, 8 080, 34 962, 34 963,34 964, 65 532, 65 533, 65 534,65 5359Siemens ST 70 N · 20109/31

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX© Siemens AG 20109■ Technical specifications (continued)6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 20094th interfaceType of interfaceMax. no. of simultaneously operableCPsPhysicsIsolatedautomatic detection of transmissionspeedPROFINETCP 1616 (HW release 8 or above),CP 1604 (HW release 7 or higher),integrated PN interface ofSIMATIC PC and S7-mECEthernetYesYes; 10/100 Mbit/sFunctionality• PROFINET IO Controller Yes• PROFINET CBAYes• Open IE communication Yes• Web serverNoPROFINET IO Controller• Services- PG/OP communication Yes- Routing Yes; S7 routing- S7 communication Yes- Open IE communication Yes• Transmission rate, min.100 Mbit/s• Transmission rate, max.100 Mbit/s• Total number of connectable 256IO Devices, max.• Number of IO Devices with IRT 64and the option "high flexibility",max.- of which in line, max. 32• IRT, supportedYes• Prioritized startup supported Yes- Number of IO Devices, max. 32• Activation/deactivation of YesIO Devices- Number of IO Devices that can 8be simultaneously activated/deactivated, max.• IO Devices changing during Yesoperation (partner ports),supported• Device replacement without Yesswap medium• Send clock times250 µs, 500 µs, 1 ms• Updating time 0.25...512depending on the send cycle• Address area- Inputs, max. 16 Kibyte-Outputs, max.16 Kibyte• User data per address area, max. 2kbyte- User data consistency, max. 256 byte6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009SIMATIC communication• PG/OP communicationYes• S7 routingYes• S7 communicationYes• Number of connections, max. 32Open IE communication• Open IE communication, Yessupported• Number of connections, max. 32• Local port numbers used at thesystem endIsochronous modeIsochronous modeNumber of DP masters withisochronous modeUser data per isochronous slave,max.equidistanceshortest clock pulseCPU/ programmingProgramming language• STEP 70, 20, 21, 25, 80, 102, 135, 161,34 962, 34 963, 34 964, 65 532,65 533, 65 534, 65 535Yes; only PROFIBUS2128 byte•LAD•FBD•STL•SCL•CFC• GRAPH• HiGraph ®Nesting levels 8User program protection/Yespassword protectionYes2.2 ms;2.2 ms without partial processimage;2.2 ms with partial process imageYes; V5.4, SP4 or higher,Engineering Tools (optional)YesYesYesYesYesYesYesSoftware libraries• Easy Motion ControlYes• Software redundancyYes; from V1.2, operation ofWinAC RTX with WinAC RTX onlyOpen Development interfaces• CCX (Custom Code Extension) Yes; WinAC ODK V4.2 or higher• SMX (Shared Memory Extension) Yes; WinAC ODK V4.2 or higher- Inputs 4 Kibyte-Outputs4 Kibyte• CMI (Controller Management Yes; WinAC ODK V4.2 or higherInterface)9/32 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX■ Technical specifications (continued)6ES7 671-0RC07-0YA0Product type designation SIMATIC WinAC RTX 2009Number of simultaneously activeSFCs• DPSYC_FR20; of a total of 20 for all SFCs• D_ACT_DP20; of a total of 20 for all SFCs•RD_REC20; of a total of 20 for all SFCs•WR_REC20; of a total of 20 for all SFCs•WR_PARM20; of a total of 20 for all SFCs• PARM_MOD20; of a total of 20 for all SFCs• WR_DPARM20; of a total of 20 for all SFCs• DPNRM_DG20; of a total of 20 for all SFCs• RDSYSST20; of a total of 20 for all SFCsNumber of simultaneously activeSFBs•RD_REC20; of a total of 20 for all SFBs•WR_REC20; of a total of 20 for all SFBsHardware requirementsHardware requiredPC with color monitor, keyboard,mouse or pointing device forWindowsRequired memory on hard disk, min. 100 MbyteMain memory, min.1GbyteProcessorIntel Celeron M, 900 MHzor compatible• Multi-processor systemYes; Dual Pentium, CoreDuo,Core2Duo or compatible• Hyper-threadingYesOperating systemsOperating system• Windows NT 4.0No• Windows 2000No• Windows XPYes; Professional, SP2 and SP3• Windows XP embedded Yes; With the delivery image of theSIMATIC PC- supported HAL types under PC with single core processorWindows XPwithout hyperthreading: ACPI-PC,ACPI uniprocessor PC; PC withmulticore processors or hyperthreading:ACPI multiprocessorPC, MPS multiprocessor PC;• Windows VistaNoDimensions and weightWeight• Weight, approx.100 g; with packaging■ Ordering dataOrder No.SIMATIC WinAC RTX 2009 A 6ES7 671-0RC07-0YA0Software PLC for PC-basedautomation tasks with stringentdeterministic requirements;PROFIBUS and PROFINET;CD-ROM with electronicdocumentation d, e, f;single license, executable underWindows XP SP2A: Subject to export regulations: AL: N and ECCN: EAR99SC: Subject to export regulations: AL: N and ECCN: EAR99HSIMATIC WinAC RTX 2009 A 6ES7 671-0RC07-0YE0UpgradeFor upgrading from Basis/RTXV3.x, V4.0, V4.1 2005 and 2008;single license, executable underWindows XP SP2SIMATIC WinAC NV128 C 6ES7 671-0AG00-1YA7PC plug-in card with non-volatilememory for the storage of up to128 KB of retentive data in theevent of voltage failureCP 5611 A26GK1 561-1AA01communications processorPCI card (32 bit) for connection ofa programming device or PCto PROFIBUSCP 5621communications processor• PCI Express x1 card (32 bit) for E 6GK1 562-1AA00connection of a programmingdevice or PC to PROFIBUS• PCI Express x1 card (32 bit) E 6GK1 562-1AM00CP 5621 and MPI cable, 5 mCP 5603 Microbox Package C 6GK1 560-3AU00Comprising CP 5603 module andMicrobox expansion rackCP 5613 A26GK1 561-3AA01communications processorPCI card (32 bit; 3.3 V/5 V) forconnection to PROFIBUS incl.DP-Base software with NCM PC;DP-RAM interface for DP master,incl. PG and FDL protocol;single license for 1 installation,runtime software, software andelectronic manual on CD-ROM,Class A, for 32 bitWindows 2000 Professional/Server,Windows XP Professional,German/EnglishCP 16166GK1 161-6AA01communications processorPCI Card (32 bit; 3.3/5 V universalkey) with ASIC ERTEC 400 forconnecting PCs to PROFINET IOwith 4-port real-time switch(RJ45); incl. IO-Base software forPROFINET IO controller (RT operation)and NCM PC;single license for one installation,runtime software, software andelectronic manual on CD-ROM,Class A, for 32 bitWindows XP Professional;German/EnglishCP 1604 Microbox Package 6GK1 160-4AU00Package for implementing theCP 1604 in the SIMATIC MicroboxPC; comprising the CP 1604,connection board, power supplyand expansion rack for MicroboxPC; for use with Development KitDK-16xx PN IO; NCM PCE: Subject to export regulations: AL: N and ECCN: 5D002ENC39Siemens ST 70 N · 20109/33

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX F■ Overview© Siemens AG 2010• SIMATIC WINAC RTX F:Optimized for applications that demand a high degree offlexibility and integration capability and that must also satisfysafety requirements up to SIL 3 (IEC 61508).• The software solution for tasks that require hard deterministicbehavior and high performance.• With real-time expansion for assuring deterministic behaviorfor the control section.• Distributed I/O can be connected over PROFIBUS and/orPROFINET, also safety-related over PROFIsafe.9■ Technical specifications6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009Product versionHardware product version -Firmware version 4.5associated programming package STEP7 V5.4 SP5 or higher +HSP135 as basic requirement forthe HSP178 for WinAC RTX F 2009on Embedded Controller +HSP179 for WinAC RTX F 2009 onPC station / iMap V3.0 SP1 /option package S7 DistributedSafety V5.4 SP5 or higherMemoryWork memory• integrated (for program) 4 Mbyte; Adjustable; depends onNon Paged Memory Pool• integrated (for data)4 Mbyte; Adjustable; depends onNon Paged Memory PoolLoad memory• integrated RAM, max.8 Mbyte; Adjustable; depends onNon Paged Memory PoolCPU/ blocksDB• Number, max. 65 535;Limited only by RAM set for dataFB• Number, max. 65 536;Limited only by RAM set for codeFC• Number, max. 65 536;Limited only by RAM set for codeOB• Number, max.Limited only by RAM for code• Number of free cycle OBs 1; OB 1• Number of time alarm OBs 1; OB 10• Number of delay alarm OBs 1; OB 20• Number of watchdog interrupts 9; OB 30-38• Number of process alarm OBs 1; OB 406ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009OB• Number of ODK OBs 3; OB 52-54• Number of DPV1 alarm OBs 3; OB 55-57• Number of isochronous mode 2; OB 61-62OBs• Number of startup OBs 2; OB 100, 102• Number of asynchronous error 7; OB 80, 82-85, 86, 88OBs• Number of synchronous error 2; OB 121, 122OBsNesting depth• per priority class 24• additional within an error OB 24CPU/ processing timesfor bit operations, min.0.004 µs; typ.for fixed point arithmetic, min. 0.003 µs; typ.for floating point arithmetic, min. 0.004 µs; typ.Reference platformPentium IV, 2.4 GHzTimes/counters and theirretentivityS7 counter• Number 2 048• Retentivity- can be set Yes- lower limit 0- upper limit 2047- preset 8• Counting range- can be set Yes- lower limit 0- upper limit 999IEC counter• presentYes• TypeSFBS7 times• Number 2 0489/34 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX F■ Technical specifications (continued)6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009S7 times• Retentivity- can be set Yes- lower limit 0- upper limit 2 047- preset 0• Time range- lower limit 10 ms- upper limit 9 990 sIEC timer• present• TypeData areas and their retentivityRetentivity without UPS andPS Extension BoardYesSFB128 KB with SIMATIC IPC427Cand HMI IPC477C; furtherSIMATIC PCs on requestall dataRetentivity with UPSFlag• Number, max.16 Kibyte• of which retentive MB 0 to MB 16383• Retentivity preset MB 0 to MB 15• Number of clock memories 8Local data• adjustable, max.32 Kibyte• preset16 Kibyte• per priority class, max.32 KibyteAddress areaI/O address area• overall16 Kibyte•Outputs16 Kibyte• of which, distributed- DP interface, inputs 16 Kibyte- DP interface, outputs 16 Kibyte- PN interface, inputs 16 Kibyte- PN interface, outputs 16 KibyteProcess image• Inputs, adjustable8 Kibyte• Outputs, adjustable8 Kibyte• Inputs, default512 byte• Outputs, default512 byteSubprocess images• Number of subprocess images, 15max.Digital channels• Inputs 128 000•Outputs 128 000Analog channels• Inputs 8 000•Outputs 8 000Hardware configurationSubmodules• Number of submodules, max 46ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009Submodules• of which PROFIBUS, max. 4; Supported interfaces:see 1st and 2nd interface• of which Industrial Ethernet, max. 1; Supported interfaces:see 3rd and 4th interfaceNumber of operable FMs and CPs(recommended)•FM 4; FM distributed: FM 350-1/350-2,FM 351, FM 352, FM 353,FM 355/355-2• CP, point-to-point2; CP 340, CP 341 distributed• CP, LANOver PC CPTime of dayClock• Hardware clock (real-time clock) Yes• battery-backed and synchronizableYesRuntime meter• Number 8Clock synchronization• supportedYes• to PC-CP, slaveYes• on Ethernet via NTPYesS7 message functionsNumber of login stations for 62message functions, max.SCAN procedureNoProcess diagnostic messages Yes; ALARM_S, ALARM_SQ,ALARM_D, ALARM_DQsimultaneously active Alarm-S 20; of a total of 20 for all SFCsblocks, max.Alarm 8-blocksYes• Number of instances for alarm 8 600and S7 communication blocks,max.Process control messages NoTest commissioning functionsStatus/control• Status/control variableYesForcing• ForcingNoStatus blockYesSingle stepYesDiagnostic buffer• presentYes• Number of entries, max. 3 200- preset 120Communication functionsPG/OP communicationYesData record routingNoGlobal data communication• supportedNoS7 basic communication• supportedNo9Siemens ST 70 N · 20109/35

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX F© Siemens AG 20109■ Technical specifications (continued)6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009S7 communication• supportedYes• as serverYes• as clientYes• User data per job, max.64 Kibyte; Depends on whichblock is used: BSEND/USEND orPUT/GETWeb server• Web serverNoOpen IE communication• TCP/IPYes- Number of connections, max. Dependent on interface- Data length, max. 64 KB - 2 bytes = 65534 bytes• ISO-on-TCP (RFC1006)No•UDPYes- Number of connections, max. Dependent on interface- Data length, max. 1 472 byteNumber of connections• overall 64• usable for PG communication- reserved for PG communication 1• usable for OP communication- reserved for OP communication 1PROFINET CBA (at set setpointcommunication load)• Setpoint for the CPU communicationload20 %• Number of remote interconnectionpartners64• Number of functions,30master/slave• Total of all Master/Slave connections1 000• Data length of all incoming 6 800 byteconnections master/slave, max.• Data length of all outgoing 6 800 byteconnections master/slave, max.• Number of device-internal and 500PROFIBUS interconnections• Data length of device-internal and 4 000 bytePROFIBUS interconnections,max.• Data length per connection, max. 1 400 byte• Remote interconnections withacyclic transmission- Sampling frequency:500 msSampling time, min.- Number of incoming interconnections100- Number of outgoing interconnections100- Data length of all incoming 2 000 byteinterconnections, max.- Data length of all outgoing 2 000 byteinterconnections, max.- Data length per connection, 1 400 bytemax.6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009• Remote interconnections withcyclic transmission- Transmission frequency: 10 msTransmission interval, min.- Number of incoming interconnections200- Number of outgoing interconnections200- Data length of all incoming 4 800 byteinterconnections, max.- Data length of all outgoing 4 800 byteinterconnections, max.- Data length per connection, 250 bytemax.• HMI variables via PROFINET(acyclic)- Number of stations that can 3log on for HMI variables(PN OPC/iMap)- HMI variable updating 500 ms- Number of HMI variables 200- Data length of all HMI variables, 2 000 bytemax.• PROFIBUS proxy functionality- supported Yes- Number of linked PROFIBUS 16devices- Data length per connection, 240 byte; Slave-dependentmax.1st interfaceType of interfaceCP 5611-A2, CP 5621, integratedPB interface of the SIMATIC PCMax. no. of simultaneously 1operable CPsPhysicsRS 485 / PROFIBUSIsolatedYesPower supply to interface does not exist(15 to 30 V DC), max.Functionality•MPINo• DP masterYes• DP slaveNoDP master• Number of connections, max. 8• Services- PG/OP communication Yes- Routing Yes- Global data communication No- S7 basic communication No- S7 communication Yes- Equidistance mode support Yes; Only in conjunction withisochronous mode- Isochronous mode Yes- SYNC/FREEZE Yes- Activation/deactivation of YesDP slaves- Direct data exchange (slave-toslaveYescommunication)9/36 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX F■ Technical specifications (continued)6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009DP master• Services-DPV0-DPV1• Transmission speeds, max.YesYes• Number of DP slaves, max. 6412 Mbit/s• Address area- Inputs, max. 16 Kibyte-Outputs, max.16 Kibyte• User data per DP slave- Inputs, max. 244 byte-Outputs, max.244 byte2nd interfaceType of interface CP 5613, CP 5613-A2, CP 5603Max. no. of simultaneously 4operable CPsPhysicsRS 485 / PROFIBUSIsolatedYesFunctionality•MPINo•DP masterYes• DP slaveNoDP master• Number of connections, max. 50• Services- PG/OP communication Yes- Routing Yes- Global data communication No- S7 basic communication No- S7 communication Yes- Equidistance mode support Yes; Only in conjunction withisochronous mode- Isochronous mode Yes- SYNC/FREEZE Yes- Activation/deactivation of DP Yesslaves- Direct data exchange (slave-toslaveYescommunication)-DPV0Yes-DPV1Yes• Transmission speeds, max. 12 Mbit/s• Number of DP slaves, max. 125• Address area- Inputs, max. 16 Kibyte-Outputs, max.16 Kibyte• User data per DP slave- Inputs, max. 244 byte-Outputs, max.244 byte3rd interfaceType of interfacePROFINETMax. no. of simultaneouslyoperable CPs1; Intel Pro/1000 (Intel 82571EB,82573L, 82574L, 82541PI;non shared IRQ required);integrated IE interfaceSIMATIC PC 4x7B, 6x7B, 8x7Band IPC4x7C6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009PhysicsEthernetIsolatedYesautomatic detection of transmission Yes; 10/100 Mbit/sspeedFunctionality• PROFINET IO Controller Yes• PROFINET IO DeviceNo• PROFINET CBAYes• Open IE communication Yes• Web serverNoPROFINET IO Controller• Services- PG/OP communication Yes- Routing Yes; S7 routing- S7 communication Yes- Open IE communication Yes• Transmission speeds, min. 100 Mbit/s• Transmission rate, max.100 Mbit/s• Total number of connectable IO 128Devices, max.• IRT, supportedNo• Prioritized startup supported Yes- Number of IO Devices, max. 32• Activation/deactivation of YesIO Devices- Number of IO Devices that can 8be simultaneously activated/deactivated, max.• IO Devices changing during Yesoperation (partner ports),supported• Device replacement without Yesswap medium• Send clock times1 ms•Updating time1 - 512 ms (minimum valuedepends on communication shareset for PROFINET I/O, on thenumber of I/O devices, and on thevolume of configured user data)• Address area- Inputs, max. 16 Kibyte- Outputs, max. 16 Kibyte• User data per address area, max. 2kbyte- User data consistency, max. 256 byteSIMATIC communication• PG/OP communicationYes• S7 routingYes• S7 communicationYes• Number of connections, max. 16Open IE communication• Open IE communication, Yessupported• Number of connections, max. 329Siemens ST 70 N · 20109/37

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX F© Siemens AG 20109■ Technical specifications (continued)6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009Open IE communication• Local port numbers used at thesystem end4th interfaceType of interfaceMax. no. of simultaneouslyoperable CPsPhysicsIsolatedautomatic detection of transmissionspeed0, 20, 21, 23, 25, 80, 102, 135,161, 8 080, 34 962, 34 963,34 964, 65 532, 65 533, 65 534,65 535PROFINETCP 1616 (HW release 8 or above),CP 1604 (HW release 7 or higher),integrated PN interface ofSIMATIC PC and S7-mECEthernetYesYes; 10/100 Mbit/sFunctionality• PROFINET IO Controller Yes• PROFINET CBAYes• Open IE communication Yes• Web serverNoPROFINET IO Controller• Services- PG/OP communication Yes- Routing Yes; S7 routing- S7 communication Yes- Open IE communication Yes• Transmission rate, min.100 Mbit/s• Transmission rate, max.100 Mbit/s• Total number of connectable 256IO Devices, max.• Number of IO Devices with IRT 64and the option "high flexibility",max.- of which in line, max. 32• IRT, supportedYes• Prioritized startup supported Yes- Number of IO Devices, max. 32• Activation/deactivation of YesIO Devices- Number of IO Devices that can 8be simultaneously activated/deactivated, max.• IO Devices changing during Yesoperation (partner ports),supported• Device replacement without Yesswap medium• Send clock times250 µs, 500 µs, 1 ms• Updating time 0.25...512depending on the send cycle• Address area- Inputs, max. 16 byte; KB-Outputs, max.16 byte; KB• User data per address area, max. 2 byte- User data consistency, max. 256 byte; Byte6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009SIMATIC communication• PG/OP communicationYes• S7 routingYes• S7 communicationYes• Number of connections, max. 32Open IE communication• Open IE communication, Yessupported• Number of connections, max. 32• Local port numbers used at thesystem endIsochronous modeIsochronous modeNumber of DP masters withisochronous modeUser data per isochronous slave,max.equidistanceshortest clock pulseCPU/ programmingProgramming language• STEP 70, 20, 21, 25, 80, 102, 135, 161,34 962, 34 963, 34 964, 65 532,65 533, 65 534, 65 535Yes; only PROFIBUS2128 byte•LAD•FBD•STL•SCL•CFC• GRAPH• HiGraph ®Nesting levels 8User program protection/Yespassword protectionYes2.2 ms;2.2 ms without partial processimage;2.2 ms with partial process imageYes; V5.4 SP5 + HSP135 as basicrequirement for the HSP178 forWinAC RTX F 2009 on EmbeddedController+ HSP179 for WinAC RTX F 2009on PC station,engineering tools (optional)YesYesYesYesYesYesYesSoftware libraries• Easy Motion ControlYes• Software redundancyYes; from V1.2, operation ofWinAC RTX with WinAC RTX onlyOpen Development interfaces• CCX (Custom Code Extension) Yes; WinAC ODK V4.2 or higher• SMX (Shared Memory Extension) Yes; WinAC ODK V4.2 or higher- Inputs 4 Kibyte-Outputs4 Kibyte• CMI (Controller Management Yes; WinAC ODK V4.2 or higherInterface)9/38 Siemens ST 70 N · 2010

© Siemens AG 2010Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC RTX F■ Technical specifications (continued) ■ Ordering data Order No.6ES7 671-1RC07-0YA0Product type designation SIMATIC WinAC RTX F 2009Number of simultaneously activeSFCs• DPSYC_FR20; of a total of 20 for all SFCs• D_ACT_DP20; of a total of 20 for all SFCs•RD_REC20; of a total of 20 for all SFCs•WR_REC20; of a total of 20 for all SFCs•WR_PARM20; of a total of 20 for all SFCs• PARM_MOD20; of a total of 20 for all SFCs• WR_DPARM20; of a total of 20 for all SFCs• DPNRM_DG20; of a total of 20 for all SFCs• RDSYSST20; of a total of 20 for all SFCsNumber of simultaneously activeSFBs•RD_REC20; of a total of 20 for all SFBs•WR_REC20; of a total of 20 for all SFBsHardware requirementsHardware requiredPC with color monitor, keyboard,mouse or pointing device forWindowsRequired memory on hard disk, 100 Mbytemin.Main memory, min.1GbyteProcessor• Multi-processor systemNo• Hyper-threadingYesOperating systemsOperating system• Windows NT 4.0No• Windows 2000No• Windows XPYes; Professional, SP2 and SP3• Windows XP embedded Yes; With the delivery image of theSIMATIC PC- supported HAL types under PC with single core processorWindows XPwithout hyperthreading: ACPI-PC,ACPI uniprocessor PC;PC with multicore processors orhyperthreading: ACPI multiprocessorPC, MPS multiprocessor PC;• Windows VistaNoDimensions and weightWeight• Weight, approx.100 g; with packagingSIMATIC WinAC RTX F 2009 A 6ES7 671-1RC07-0YA0CP 5611 A26GK1 561-1AA01communications processorPCI card (32 bit) for connection ofa programming device or PCto PROFIBUSCP 5621communications processorPCI Express x1 card (32 bit) for E 6GK1 562-1AA00connection of a programmingdevice or PC to PROFIBUSPCI Express x1 card (32 bit) E 6GK1 562-1AM00CP 5621 and MPI cable, 5 mCP 5603 Microbox Package C 6GK1 560-3AU00Comprising CP 5603 module andMicrobox expansion rackCP 5613 A26GK1 561-3AA01communications processorPCI card (32 bit; 3.3 V/5 V) forconnection to PROFIBUS incl.DP-Base software with NCM PC;DP-RAM interface for DP master,incl. PG and FDL protocol;single license for 1 installation,runtime software, software andelectronic manual on CD-ROM,Class A, for 32 bitWindows 2000 Professional/Server,Windows XP Professional,German/EnglishCP 16166GK1 161-6AA01communications processorPCI Card (32 bit; 3.3/5 V universalkey) with ASIC ERTEC 400 forconnecting PCs to PROFINET IOwith 4-port real-time switch(RJ45); incl. IO-Base software forPROFINET IO controller(RT operation) and NCM PC;single license for one installation,runtime software, software andelectronic manual on CD-ROM,Class A, for 32 bitWindows XP Professional;German/EnglishCP 1604 Microbox Package 6GK1 160-4AU00Package for implementing theCP 1604 in the SIMATIC MicroboxPC; comprising the CP 1604,connection board, power supplyand expansion rack for MicroboxPC; for use with Development KitDK-16xx PN IO; NCM PCA: Subject to export regulations: AL: N and ECCN: EAR99SC: Subject to export regulations: AL: N and ECCN: EAR99HE: Subject to export regulations: AL: N and ECCN: 5D002ENC39Siemens ST 70 N · 20109/39

Embedded/PC-based AutomationPC-based ControlSIMATIC WinAC ODK© Siemens AG 20109■ Overview• SIMATIC WinAC software PLCs support powerful interfaceswhich permit close meshing of the control task with PC-basedapplications.• WinAC ODK allows the user to develop applications or tointegrate already existing applications into the control task.New with WinAC ODK V4.2:• CCX interface:- New SFB 65003 for asynchronous execution of ODKapplications- Expansion of data access functions- Creation of Windows DLL with C# and VB• SMX interface:- Access to the Shared Memory interface under IntervalZeroRTX- Expansion of data access functions- Creation of Windows applications with C# and VB• Supports MS Visual Studio 2005 and 2008 (under Windows)■ Technical specifications6ES7 806-1CC03-0BA0Product type designation SIMATIC WinAC ODK V4.2Open Development interfaces• CCX (Custom Code Extension) Yes; WinAC RTX 2008 (V4.4) orhigher;programming languages:Microsoft Visual C++ V6.0 SP5 orhigher, .net 2003, 2005, 2008;Microsoft Visual Basic 2005, 2008;Microsoft Visual C# 2005, 2008• SMX (Shared Memory Extension) Yes; WinAC RTX 2008 (V4.4) orhigher;programming languages:Microsoft Visual C++ V6.0 SP5 orhigher, .net 2003, 2005, 2008;Microsoft Visual Basic 2005, 2008;Microsoft Visual C# 2005, 2008• CMI (Controller ManagementInterface)Hardware requirementsHardware requiredRequired memory on hard disk,min.Main memory, min.ProcessorSoftware requirementSoftware requiredOperating systemsOperating system• Windows XPDimensions and weightWeight• Weight, approx.Yes; WinAC RTX 2005 SP2 (V4.3)or higher;programming languages:Microsoft Visual C++ V6.0 SP5 orhigher, .net 2003, 2005, 2008;Microsoft Visual Basic V6.0 SP5 orhigher, .net 2003, 2005, 2008;Microsoft Visual C# .net 2003,2005, 2008PC with color monitor, keyboard,mouse or pointing device forWindows30 Mbyte512 MbyteIntel Pentium 800 MHzMicrosoft Visual Developer Studio,for details see interfaces;CCX and SMX realtime applicationsin addition:IntervalZero SDK V8.1(SDK version must match theWinAC RTX version)Yes; Professional, SP2 and SP3200 g■ Ordering dataOrder No.SIMATIC WinAC ODK V4.2for integration of C/C++ code inWinAC PLCs, executable underWindows XP SP2 or SP3;CD-ROM with electronicdocumentationSingle license A 6ES7 806-1CC03-0BA0A: Subject to export regulations: AL: N and ECCN: EAR99S■9/40 Siemens ST 70 N · 2010

© Siemens AG 2010Overview11/2 SIMATIC ET 20011/2 SIMATIC ET 200 Configurator11/2 SIMATIC ET 200eco PNSiemens ST 70 N · 2010

OverviewSIMATIC ET 200SIMATIC ET 200 Configuratorin the SIMATIC Selection Tool© Siemens AG 2010■ OverviewJust a mouse click away from a tailor-made I/O station:With the SIMATIC ET 200 ConfiguratorThe ET 200 Configurator of the SIMATIC Selection Tool providesfirst class support for configuring the ET 200 station. The softwaretool guides the user through the configuring process andautomatically creates order lists complete with accessories. Italso assists with compliance with limits such as load currents,slot rules and parameters.The configuration created in the ET 200 Configurator can beimported into STEP 7 without any problems. This reduces theengineering costs and saves double inputs.The software tool is structured in a clear, intuitive manner:Six configuring layers make the work easy and convenient.• General notes: General station data as well as a graphicalpresentation of the configured station• Module selection: Guided selection of modules, throughmodule suggestions• Limits: Station size, weight, number of modules, load voltage,parameters, etc. are all displayed• Accessories: Guided selection of the necessary accessories(module-specific or station-wide)• Potential distribution: Graphical presentation of the potentialswithin a station• Parts list: Automatic generation of a clearly understandableparts list simplifies the ordering processThe ET 200 configurator is a component of the SIMATICSelection Tool, which is available as a configurator in theIndustry Mall:www.siemens.com/industrymall11SIMATIC ET 200eco PN■ Overview• Compact block I/O for processing digital, analog and IO-Linksignals for connecting to the PROFINET bus system• Cabinet-free design with degree of protection IP65/66/67 withM12 connections• Very rugged and resistant metal enclosure and encapsulated11/2 Siemens ST 70 N · 2010• Compact module in two types of enclosures:- 30 mm x 200 mm x 37 mm (W x H x D, long and narrowenclosure), with 4 x M12 for digital signals- 60 mm x 175 mm x 37 mm (W x H x D, short and wideenclosure), with 8 x M12 for digital signals and IO-Link- 60 mm x 175 mm x 37 mm (W x H x D, short and wideenclosure) with 4 x M12 or 8 x M12 for analog signals• PROFINET connection:2 x M12 and automatic PROFINET address assignment• Data transmission rate 100 Mbit/s• LLDP proximity detection without PG and Fast Startup (bootup within approx 0.5 seconds)• Supply and load voltage connection: 2 x M12• Module variance:-8 DI- 16 DI-8 DO (2 A)- 8 DO (1.3 A)- 8 DO (0.5 A)- 16 DO (1.3 A)- 8 DI/DO (1.3 A),- 8 AI (U, I, TC, RTD)- 4 AO (U, I)- 4 IO-Link + 8 DI + 4 DO (1.3 A)• Channel-specific diagnosticsFurther information:• Catalogs IK PI, CA 01• Internet:www.siemens.com/et200ecopnwww.siemens.com/et200 (general)■

© Siemens AG 2010SIMATIC Control systems12/2 SIMATIC TDC12/2 CPU551 processor module12/2 CP53M0 communications moduleSiemens ST 70 N · 2010

SIMATIC Control systemsSIMATIC TDC© Siemens AG 2010CPU551 processor module■ OverviewHigh-performance CPU module for open and closed-loop controland arithmetic tasks.■ Technical specificationsCPU551Required space / width1 slotWeight0.6 kgDisplay5x7 LEDLocal service interfaceSerial RS232 interfaceSampling intervals from 100 µsSDRAM128 MBSynchronous cache8 MBClock frequency500 MHzCPU64 Bit RISC CPU with floatingpoint unitSRAM512 KB, battery bufferedPower supplyVoltage / Power supply (at 250°C)■ Ordering dataCPU551+3.3 V, 2.0 A typical+5 V, 1.5 A typical+12 V, 0.04 A typical–12 V, 0.04 A typical3.0 V, 3 µA typical15 WBuffer batteryPower loss, typicalDigital inputsNumber8 inputs, 4 with alarm capabilityGalvanic isolationOnly through optional interfacemodulesInput voltage• Rated voltage24 V• For 0-signal-1 V ... +6 V• For 1-signal+13.5 V ... +33 VInput power• At 0-signal0 mA• At 1-signal3 mADelay time 100 µsReal-time clock, resolution0.1 msCPU551 processor moduleAccessoriesMC500 memory module(4 MB)MC510 memory module(8 MB)MC521 memory module(2 MB)Order No.6DD1 600-0BA26DD1 610-0AH4C: Subject to export regulations: AL: N and ECCN: EAR99HCC6DD1 610-0AH66DD1 610-0AH312CP53M0 communications module■ OverviewThe CP53M0 communications module allows coupling of aSIMATIC TDC system to a SIMADYN D system for fast dataexchange, e.g. when expanding existing SIMADYN D systems.■ Technical specificationsCP53M0 communications moduleMemoryCommunication memorySRAM, 128 KBCommunications bufferSDRAM, 8 MBFOC interfaceNumber2 (master mode)1 (slave mode)Data transfer rate96 Mbit/sCoding5B/6BCP53M0 communications moduleVoltage, currentsVoltages / currents■ Ordering data+5 V / 0.3 A3.3 V / 0.5 APower lossPower loss, typical3.1 WDimensionsNumber of slots required in rack 1Dimensions W x H x D (in mm) 20 x 233 x 160Weight0.6 kgCP53M0Ccommunications moduleFor connection of a SIMATIC TDCsystem to a SIMADYN D systemor to two additional SIMATIC TDCracksOrder No.6DD1 660-0BJ0C: Subject to export regulations: AL: N and ECCN: EAR99H■12/2 Siemens ST 70 N · 2010

© Siemens AG 2010Appendix14/2 Training14/3 SITRAIN Certification Program14/5 Additional documentation14/5 Technical books for automationengineering14/6 SIMATIC Manual Collection14/7 Standards and approbations14/7 CE marking14/8 Certificates14/8 Quality management14/9 Partner at Industry Automation andDrive Technologies14/9 Siemens contacts worldwide14/10 Siemens Solution Partner Automation,Power Distribution and PLM14/11 Online Services14/11 Information and Ordering in the Internetand on DVD14/12 Service & Support14/12 Services covering the entire life cycle14/13 Knowledge Base on DVD14/13 Automation Value Card14/14 Software Licenses14/15 Index14/16 Ordering data summary14/17 Fax form14/20 Conditions of sale and delivery14/20 Export regulationsSiemens ST 70 N · 2010

AppendixTraining© Siemens AG 2010■ Faster and more applicable know-how:Hands-on training from the manufacturerSITRAIN ® – the Siemens Training for Automation and IndustrialSolutions – provides you with comprehensive support in solvingyour tasks.Training by the market leader in automation and plant engineeringenables you to make independent decisions with confidence.Especially where the optimum and efficient use ofproducts and plants are concerned. You can eliminate deficienciesin existing plants, and exclude expensive faulty planningright from the beginning.First-class know-how directly pays for itself: In shorter startuptimes, high-quality end products, faster troubleshooting andreduced downtimes. In other words, increased profits and lowercosts.Achieve more with SITRAIN• Shorter times for startup, maintenance and servicing• Optimized production operations• Reliable configuration and startup• Minimization of plant downtimes• Flexible plant adaptation to market requirements• Compliance with quality standards in production• Increased employee satisfaction and motivation• Shorter familiarization times following changes in technologyand staff■ SITRAIN highlightsTop trainersOur trainers are skilled teachers with direct practical experience.Course developers have close contact with product development,and directly pass on their knowledge to the trainers.Practical experienceThe practical experience of our trainers enables them to teachtheory effectively. But since theory can be pretty drab, we attachgreat importance to practical exercises which can comprise upto half of of the course time. You can therefore immediatelyimplement your new knowledge in practice. We train you onstate-of-the-art methodically/didactically designed trainingequipment. This training approach will give you all the confidenceyou need.Wide varietyWith a total of about 300 local attendance courses, we train thecomplete range of Siemens Industry products as well as interactionof the products in systems.Tailor-made trainingWe are only a short distance away. You can find us at more than50 locations in Germany, and in 62 countries worldwide. Youwish to have individual training instead of one of our300 courses? Our solution: We will provide a program tailoredexactly to your personal requirements. Training can be carriedout in our Training Centers or at your company.The right mixture: Blended learning"Blended learning" means a combination of various trainingmedia and sequences. For example, a local attendance coursein a Training Center can be optimally supplemented by a teachyourselfprogram as preparation or follow-up. Additional effect:Reduced traveling costs and periods of absence.■ SIMATIC trend topics at SITRAINSiemens starts a systematic initiative to build up your knowledgein the area of automation. In different events, which are harmonizedwith each other, SIMATIC trend topics are examined.You get first impressions in an information session: With applicationexamples, the topics are clarified. Building up on it SITRAINoffers courses to deepen your acquired knowledge.You find detailed information about this initiative at:www.siemens.com/sitrain-know-how-initiative14■ ContactVisit our site on the Internet at:http://www.siemens.com/sitrainor let us advise you personally.SITRAIN Customer Support Germany:Phone: +49 (0)1805 / 23 56 11Fax: +49 (0)1805 / 23 56 12(0.14 €/min. from a German landline network,mobile telephone prices may vary)E-Mail: info@sitrain.com14/2 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixTraining■ Siemens Certified Service Technician Level 1The Siemens Certified Service Technician Level 1 is based onbasic know how of SIMATIC PLC service training.Requirements profileTasksProfessional assembly, connection of programmable logiccontrols, program changes, error diagnostics.Capabilities of a Siemens Certified Service Technician Level 1• You know the assembly and functionality of a PLC and thebasic operations of the respective program language• You know who to assemble and connect programmable logicdevices, how to control in- and outputs and – with tutorialhelp – how to realize startupsApplication programmingand program documentationSITRAIN Certification Program■ Siemens Certified Service Technician Level 2The Siemens Certified Service TechnicianLevel 2 is based onknow how of Siemens Certified Service Technician Level 1(Factory Automation).Requirements profileTasks• Professional assembly, connection of programmable logiccontrols, program changes, troubleshooting• Startup of Distributed I/O• Startup of a drive• Startup of human machine interface devicesCapabilities of a Siemens Certified Service Technician Level 2• You know the assembly and functionality of a PLC and thebasic operations of the respective program language• You know who to assemble and connect programmable logicdevices, how to control in- and outputs and how to realizestartupsHMI visualizationCommissioning andtroubleshootingUse of PLC componentswith special functionsDesign and cablingPLC fundamentalsSelection and evaluation ofPLC components(hardware and software)Operation of programming anddiagnostics devicesDistributed I/O,communicationSTEP 7 programming languageApplication programmingand program documentationHMI visualizationCommissioning andtroubleshootingUse of PLC componentswith special functionsDesign and cablingPLC fundamentalsSelection and evaluation ofPLC components(hardware and software)Operation of programmingand diagnostics devicesDistributed I/O, communicationSTEP 7 programming languageDrive technology Expertise and skills for solving problems and tasksFundamental technical knowledge, recognize relationships14Siemens ST 70 N · 201014/3

AppendixTraining© Siemens AG 2010SITRAIN Certification Program■ Siemens Certified Programmer■ SIMATIC trend topics at SITRAINRequirements profileTasks• Engineer-like tasks with need of complex programming possibilitieswith SIMATIC S7• Use of distributed I/O (PROFIBUS DP, PROFINET)• Use of drivesTraining "Diagnosis & Service":• Use of human machine interface devices (WinCC flexible)Capabilities of a Siemens Certified Programmer• You know the assembly and functionality of a PLC and thebasic and complex operations of the respective programlanguage• You know who to use this know how for complex tasksTraining "Machine Safety":Creation of functions,function blocks and multipleinstances (using example of aprocessing line)Creation and application ofcomplex data structuresIndirect addressing of complexdata structures and parametersLibrary functions forintegrated error handlingS7 communication (global data,SFB/SFC communication)Introduction to Industrial EthernetOverview of engineering toolsUse of PROFINETIn different events, which are harmonized with each other,Siemens offers you further education covering SIMATIC trendtopics to enlarge your knowledge in the area of automation. Youhave the choice of SITRAIN courses on the topics Diagnosis andService, Machine Safety, Industrial Communication, or PCbasedAutomation.By means of an application example, we show you SIMATICservice and diagnostic functions. You get to know both; standarddiagnosis possibilities and individually programmablediagnostic facilities. As further components of the course,decentralised servicing concepts (network general access,teleservice, WLAN ...) are taught.You get to know the application of the new norms IEC 62061and ISO 13849 for machine safety as well as an overview of therange of applications of SIMATIC Safety Integrated products.Training "Industrieller Kommunikation":You get to know from Siemens, a member of the PROFINET userorganisation (PNO), by means of an application example, thetrend-setting PROFINET as the open Industrial Ethernet standardof the automation.In the subsequent practical exercises, you parameterize aPROFINET net, put it into action and remove disturbances.In the course you learn ways to recognize endangering safetyand weak points so you can ensure information and communicationsecurity.Training "PC-based Automation":By means of an application example, we show you the use of thePC-based system and the realization of an automation solutionwith SIMATIC IPC (industry PC).In the subsequent practical exercises, you configure, parameterizeand programme a plant model.Implementation of drivesUse of HMI devices 1414/4 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixAdditional documentationTechnical books for automation engineering■ OverviewTechnical books provide sound knowledge in the varioussectors of automation engineering. Textbooks, reference booksand dictionaries are available, for example.You can use them to specifically increase your knowledge or tobecome acquainted with special areas.■ Ordering data Order No. Order No.Milestones in AutomationDecentralization withPROFIBUS-DP/DPV1Easy to read and creativelydesigned, the book offers technicians,engineers and managers aprofound look into the developmenthistory and possibilitiesfor use of a technology which leftits mark like no other on industrialprocesses and a huge range oftechnical systems.GermanEnglishAutomating with SIMATICThe book is highly suitable for allthose who have no extensiveprevious experience and whowish to become rapidlyacquainted with the field ofprogrammable controllers.GermanEnglishAutomating with STEP 7 in STLand SCLNow in its fifth edition, this bookpresents the most recent versionof the STEP 7 programmingsoftware. It is intended for allusers of SIMATIC S7 controllers.GermanEnglishAutomating with STEP 7 in LADand FBDThe book describes elements andapplications of the graphicorientedprogramming languagesLAD (ladder diagram) and FBD(function block diagram) forSIMATIC S7-300/400. It is aimedat all users of SIMATIC S7controllers.GermanEnglishControlling with SIMATICThis book discusses the practicalaspects of control engineering asa subdomain of automation andcontrol using as example theSIMATIC S7 control system.GermanEnglish6ZB3 500-0AQ01-0AA06ZB3 500-0AQ02-0AA06ZB3 500-0AE01-0AA06ZB3 500-0AE02-0AA06ZB3 500-0AA01-0AA06ZB3 500-0AA02-0AA06ZB3 500-0AB01-0AA06ZB3 500-0AB02-0AA06ZB3 500-0AD01-0AA06ZB3 500-0AD02-0AA0With its practical orientation thebook is ideal for PROFIBUSplanners, configuration expertsand programmers. Its comprehensivedescription of the fundamentalsinvolved also makes itinteresting for students anddocents alike.GermanEnglishAutomating with PROFINETThis book serves as an introductionto PROFINET technology.Decision-makers and plantplanners, pupils and students aregiven a compact overview of theconcept and the fundamentals.Configuring engineers, commissioningengineers and techniciansare provided with thecomprehensive knowledge theyneed to solve their ownPROFINET-based automationtasks.GermanEnglishElectrical Feed Drives inAutomationThis book provides a comprehensiveintroduction to thephysical and technical fundamentalsof control and drivetechnology. Particular attention isgiven to the computation andmeasurement of electric feeddrives in automation technology.GermanEnglishIndustrial Ethernet in industrialautomationThis book provides plantplanners, programmers andcommissioning engineers with thenecessary basics and terms touse Ethernet LAN technologies inindustrial automation usingSIMATIC.GermanElectrical feed drives inproduction/automationengineeringThis book describes individualand up-to-date components forfeed drives such as motors andmechanical transfer elements in apractical context.German6ZB3 500-0AC01-0AA06ZB3 500-0AC02-0AA06ZB3 500-0AP01-0AA06ZB3 500-0AP02-0AA06ZB3 500-0AF01-0AA06ZB3 500-0AF02-0AA06ZB3 500-0AM01-0AA06ZB3 500-0BC01-0AA014Siemens ST 70 N · 201014/5

AppendixAdditional documentation© Siemens AG 2010Technical books for automation engineering■ Ordering data (continued) Order No. Order No.Dictionary of Drive Technologyand MechatronicsThe dictionary offers a comprehensivecollection of terms fromthe fields of drives andautomation and related fields,completed by entries frombusiness administration,marketing, advertising andtechnical training.German/EnglishGerman/English, on CD-ROM6ZB3 500-0AG01-0AA06ZB3 500-0AH01-0AA0Dictionary of ElectricalEngineering, PowerEngineering and AutomationThis dictionary is the standardwork for all those requiring acomprehensive and reliablecompilation of terms from thefields of power generation, transmissionand distribution, driveengineering, automation,switchgear and installationengineering, power electronics aswell as measurement, analysisand test engineering.German-EnglishEnglish-GermanGerman-English/English-German; on CD-ROM6ZB3 500-0AJ01-0AA06ZB3 500-0AJ02-0AA06ZB3 500-0AJ03-0AA0SIMATIC Manual Collection■ OverviewThe SIMATIC manual collection brings together the manuals ofTotally Integrated Automation in the smallest possible package.It is eminently suitable for startup and service, replaces thespace-consuming paper version in the office and provides fastaccess to the information.The manual collection contains manuals in 5 languages for• LOGO!■ Ordering data• SIMADYN• SIMATIC bus components• SIMATIC C7• SIMATIC Distributed I/O• SIMATIC HMI• SIMATIC Sensors• SIMATIC NET• SIMATIC PC Based Automation• SIMATIC PCS 7• SIMATIC PG/PC• SIMATIC S7• SIMATIC Software• SIMATIC TDCManuals that are not yet available in all 5 languages will at leastbe included in English and German.There is an update contract for the SIMATIC Manual Collectionthat encompasses supply of the up-to-date collection and threesubsequent updates which is valid for one year. If the updatecontract is not cancelled, it is automatically extended and the listprice will be charged to the customer.Order No.SIMATIC Manual Collection A 6ES7 998-8XC01-8YE0Electronic manuals on DVD, in5 languages: S7-200/300/400,C7, LOGO!, SIMATIC DP, PC,PG, STEP 7, engineeringsoftware, runtime software,PCS 7, SIMATIC HMI, SIMATICNETSIMATIC Manual Collectionupdate service for 1 yearCurrent Manual Collection DVDas well as the three followingupdatesA: Subject to export regulations: AL: N and ECCN: EAR99SD: Subject to export regulations: AL: N and ECCN: 5D992D6ES7 998-8XC01-8YE21414/6 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixStandards and approbationsCE marking■ Overview■ Notes for machine manufacturersThe electronic products described in this catalog comply withthe requirements and protection objectives of the following EUguidelines and with the harmonized European standards (EN)which have been published for programmable controllers in theofficial Journal of the European Union:• 89/336/EWG “Electromagnetic Compatibility”(EMC guideline).• 73/23/EWG “Electrical Equipment for Use Within SpecificVoltage Limits” (low voltage guideline).We have declarations of conformity available for the responsibleauthorities.The SIMATIC products are designed for operation in industrialenvironments and comply with the following requirements:Noise emissions: EN 50081-2: 1993Noise immunity: EN 50082-2: 1995The products can also be used in the domestic environment(household, business and trade area, small plants) withindividual approval:Emitted interference: Individual approvalImmunity: EN 50082-1: 1992For household use an individual approval from the respectivenational authority or testing body is required as far as emittedinterferenceis concerned. In Germany this approval is issued bythe Federal Post and Telecommunications Office and its subsidaries.EN 60204-1 Topic/criterion NotesFor the installation and operation of the products described in Paragraph 4 Generalthis catalog, the installation guidelines described in the manualsrequirementsand the important notes concerning installation in cabinets andconcerning the use of shielded cable must be complied with.The SIMATIC automation system is not a machine within thecontext of the EU machine guidelines. Therefore a declaration ofconformity with regard to the EU machine directive 89/392/EECor 2006/42/EU (new edition, applicable from end of 2009) maynot be provided for SIMATIC.The EU machine directive regulates the requirements placed ona machine or a part thereof. A machine is understood for thepurposes of this guideline to be a combination of interconnectedparts or mechanisms (see also EN 292-1, Paragraph 3.1).SIMATIC is part of the electrical equipment of a machine, andmust therefore be integrated into the evaluation of the completemachine by the machine manufacturer.As electrical equipment, SIMATIC is subject to the low-voltagedirective which, as a "total safety directive", covers all dangersjust like the machine directive.The EN 60204-1 standard (safety of machines, general requirementsfor the electrical equipment of machines) is applicable tothe electrical equipment of machines.The following table will help you in the provision of your declarationof conformity, and shows which criteria according toEN 60204-1 (2006-06) apply to SIMATIC. You can obtain furtherinformation from the enclosed declaration of conformityaccording to the low-voltage and EMC directives (with list ofincluded standards).Paragraph 11.2Paragraph 12.3Digital input/outputinterfacesProgrammableequipmentThe requirements are met whenthe equipment is assembled/installed in accordance with theinstallation guidelines.Please note the relevantinformation in the manuals.The requirements are metThe requirements are met whenthe equipment is installed inlockable cabinets to protectagainst alteration of the memorycontents by unauthorizedpersonsParagraph 20.4 Voltage tests The requirements are met14Siemens ST 70 N · 201014/7

© Siemens AG 2010AppendixStandards and approbations, Quality management■ Certificates, authorizations, approbations,declarations of conformityAn overview of the certificates available for SIMATIC products(CE, UL, CSA, FM, shipping authorizations) can be found in theinternet athttp://www.siemens.com/simatic/certificates■ Quality managementThe quality management system of the Industry Sector, IndustryAutomation Division, complies with the international standardISO 9001.The products and systems described in this catalog are soldunder application of a quality management system certified byDQS in accordance with DIN EN ISO 9001.The DQS certificate is recognized in all EQ Net countries.DQS Registered Certificate Nos.:Siemens AG• I IA AS Industrial Automation SystemsReg. No.: 001323 QMThe lists are continously updated. The data for products whichhave not yet been included in the overview is continouslycollected and prepared for the subsequent edition.You can also find certificates, approbations, verification certificatesor characteristic curves by going directly to the Link Box:1414/8 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixPartner at Industry Automation and Drive TechnologiesSiemens contacts worldwide■ OverviewAt Siemens Industry Automation and Drive Technologies, morethan 85 000 people are resolutely pursuing the same goal:long-term improvement of your competitive ability. We are committedto this goal. Thanks to our commitment, we continue to setnew standards in automation and drive technology. In all industries- worldwide.At your service locally, around the globe for consulting, sales,training, service, support, spare parts... on the entire IndustryAutomation and Drive Technologies range.Your personal contact can be found in our Contacts Databaseat:http://www.automation.siemens.com/mcms/aspa-db/You start by selecting a• Product group,• Country,•City,•Service.14Siemens ST 70 N · 201014/9

© Siemens AG 2010AppendixPartner at Industry Automation and Drive TechnologiesSiemens Solution PartnerAutomation, Power Distribution and PLM■ OverviewSiemens Solution PartnerSolution Partner Automation, Power Distribution and PLMThe products and systems from Siemens Industry Automationand Drive Technologies offer the ideal platform for all automationapplications.Under the name Siemens Solution Partner, selected system integratorsoperate around the world as uniformly qualified solutionproviders for the portfolio of Siemens automation, power distributionand product lifecycle management products. Day afterday, they utilize their qualified product and system know-how aswell as their excellent industry expertise to your advantage –for all requirements.The Solution Partner emblem is a guarantee of quality.The basis for this is to be found in four defined quality features:• Solution quality:A good result in every case based on proven solution knowhow.• Expert quality:Certified technical competence guarantees maximum efficiency.• Project quality:Straight to the goal with proven project experience.• Product range quality:Comprehensive portfolio for state-of-the-art solutions from asingle source.Solution Partner FinderThe Siemens Solution Partner Program helps you to find theoptimum partner for your specific requirements. Support isprovided by the Solution Partner Finder, a comprehensive onlinedatabase that showcases the profiles of all our solution partners.You can convince yourself of the competence of the respectiveSolution Partner by means of the references provided.The following search criteria are possible:• Country• Technology•Sector• Company•Zip codeOnce you have located a partner, you are only one small stepfrom contacting them.You can locate the Solution Partner Finder as follows:http://www.siemens.com/automation/partnerfinderAdditional information on the Siemens Solution Partner Programis available online at:http://www.siemens.com/automation/solutionpartner1414/10 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixOnline ServicesInformation and Orderingin the Internet and on DVD■ Siemens Industry Automation and Drive Technologies in the WWWA detailed knowledge of the range of products and servicesavailable is essential when planning and configuring automationsystems. It goes without saying that this information must alwaysbe fully up-to-date.Siemens Industry Automation and Drive Technologies hastherefore built up a comprehensive range of information in theWorld Wide Web, which offers quick and easy access to all datarequired.Under the addresshttp://www.siemens.com/automationyou will find everything you need to know about products, systemsand services.■ Product Selection Using the Offline Mall of IndustryDetailed information together with convenient interactivefunctions:The Offline Mall CA 01 covers more than 80 000 products andthus provides a full summary of the Siemens Industry Automationand Drive Technologies product base.Here you will find everything that you need to solve tasks in thefields of automation, switchgear, installation and drives.All information is linked into a user interface which is easy to workwith and intuitive.After selecting the product of your choice you can order at thepress of a button, by fax or by online link.Information on the Offline Mall CA 01 can be found in the Internetunderhttp://www.siemens.com/automation/ca01or on DVD.■ Easy Shopping with the Industry MallThe Industry Mall is the virtual department store of Siemens AGin the Internet. Here you have access to a huge range of productspresented in electronic catalogs in an informative and attractiveway.Data transfer via EDIFACT allows the whole procedure fromselection through ordering to tracking of the order to be carriedout online via the Internet.Numerous functions are available to support you.For example, powerful search functions make it easy to find therequired products, which can be immediately checked for availability.Customer-specific discounts and preparation of quotescan be carried out online as well as order tracking and tracing.Please visit the Industry Mall on the Internet under:http://www.siemens.com/industrymall14Siemens ST 70 N · 201014/11

AppendixService & Support© Siemens AG 2010Services covering the entire life cycleModernization & OptimizationModernizationandOptimizationPlanning & DesignTechnicalConsultingOnlineSupportTechnicalSupportConfiguration & Development■ Technical ConsultingSupport in the planning and designingof your project from detailedactual-state analysis,target definition and consultingon product and system questionsright to the creation of theautomation solution.Spare Partsand RepairsEngineeringSupport14.IOur Service & Support accompanies you worlwide in all concernsrelated to the automation and drive technology ofSiemens. In more than 100 countries directly on site and coveringall phases of the life cycle of your machines and plants.Round the clock.An experienced team of specialists with their combined knowhowis ready to assist you. Regular training courses and aclose contact of our employees among each other - also acrosscontinents - assure a reliable service for multifaceted scopes.■ Online Support■ Technical SupportOperation & MaintenanceFieldServiceInstallation & CommissioningThe comprehensive informationsystem available round theclock via Internet ranging fromProduct Support and Service &Support services to SupportTools in the Shop.http://www.siemens.com/automation/service&supportCompetent consulting in technicalquestions covering a widerange of customer-oriented servicesfor all our products andsystems.http://www.siemens.com/automation/support-request■ Engineering Support■ Field Service■ Spare Parts and Repairs■ Optimization and UpgradingSupport in configuring and developingwith customer-orientedservices from actual configurationto implementation of the automationproject.With Field Service, we offer servicesfor startup and maintenanceessential for ensuringsystem availability.In the operating phase of a machineor automation system, weprovide a comprehensive repairand spare parts service ensuringthe highest degree of plantavailability.After startup or during the operatingphase, additional potentialfor inceasing the productiviyor for reducing costs often arises.For this purpose, we offeryou high-quality services in optimizationand upgrading.You find contact details in the Internet under:http://www.siemens.com/automation/service&support14/12 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixService & SupportKnowledge Base on DVDAutomation Value Card■ Knowledge Base on DVDFor locations without online connectionsto the Internet there areexcerpts of the free part of theinformation sources available onDVD (Service & Support KnowledgeBase). This DVD containsall the latest product informationat the time of production (FAQs,Downloads, Tips and Tricks,Updates) as well as general informationon Service & Support.The DVD also includes a full-text search and our KnowledgeManager for targeted searches for solutions. The DVD will be updatedevery 4 months.Just the same as our online offer in the Internet, the Service &Support Knowledge Base on DVD comes complete in 5 languages(German, English, French, Italian, Spanish).You can order the Service & Support Knowledge Base DVDfrom your Siemens contact.Order no. 6ZB5310-0EP30-0BA2■ Automation Value CardSmall card - great supportThe Automation Value Card is an integral component of the comprehensiveservice concept with which Siemens Automation andDrives will accompany you in each phase of your automationproject.It doesn't matter whether you want just specific services from ourTechnical Support or want to purchase something on our Onlineportal, you can always pay with your Automation Value Card. Noinvoicing, transparent and safe. With your personal card numberand associated PIN you can view the state of your account andall transactions at any time.Services on card. This is how it's done.Card number and PIN are on the back of the Automation ValueCard. When delivered, the PIN is covered by a scratch field,guaranteeing that the full credit is on the card.By entering the card number and PIN you have full access to theService & Support services being offered. The charge for theservices procured is debited from the credits on your AutomationValue Card.All the services offered are marked in currency-neutral credits,so you can use the Automation Value Card worldwide.Order your Automation and Value Card easily and comfortablylike a product with your sales contact.Automation Value Card order numbersCreditsOrder no.200 C 6ES7 997-0BA00-0XA0500 C 6ES7 997-0BB00-0XA01000 C 6ES7 997-0BC00-0XA010 000 C 6ES7 997-0BG00-0XA0C: Subject to export regulations: AL: N and ECCN: EAR99HDetailed information on the services offered is available on ourInternet site at:http://www.siemens.com/automation/service&supportService & Support à la Card: ExamplesTechnical Support”Priority“ Priority processing for urgent cases”24 h“ Availability round the clock”Extended“ Technical consulting for complex questions”MatureProducts“Consulting service for products that are not availableany moreSupport Tools in the Support ShopTools that can be used directly for configuration, analysisand testing14Siemens ST 70 N · 201014/13

AppendixSoftware Licenses© Siemens AG 201014■ OverviewSoftware typesSoftware requiring a license is categorized into types.The following software types have been defined:• Engineering software• Runtime softwareEngineering softwareThis includes all software products for creating (engineering)user software, e.g. for configuring, programming, parameterizing,testing, commissioning or servicing.Data generated with engineering software and executableprograms can be duplicated for your own use or for use by thirdpartiesfree-of-charge.Runtime softwareThis includes all software products required for plant/machineoperation, e.g. operating system, basic system, system expansions,drivers, etc.The duplication of the runtime software and executable programscreated with the runtime software for your own use or foruse by third-parties is subject to a charge.You can find information about license fees according to use inthe ordering data (e.g. in the catalog). Examples of categories ofuse include per CPU, per installation, per channel, per instance,per axis, per control loop, per variable, etc.Information about extended rights of use for parameterization/configurationtools supplied as integral components of thescope of delivery can be found in the readme file supplied withthe relevant product(s).License typesSiemens Industry Automation & Drive Technologies offers varioustypes of software license:• Floating license• Single license• Rental license• Trial licenseFloating licenseThe software may be installed for internal use on any number ofdevices by the licensee. Only the concurrent user is licensed.The concurrent user is the person using the program. Usebegins when the software is started.A license is required for each concurrent user.Single licenseUnlike the floating license, a single license permits only oneinstallation of the software.The type of use licensed is specified in the ordering data andin the Certificate of License (CoL). Types of use include forexample per device, per axis, per channel, etc.One single license is required for each type of use defined.Rental licenseA rental license supports the "sporadic use" of engineeringsoftware. Once the license key has been installed, the softwarecan be used for a specific number of hours (the operating hoursdo not have to be consecutive).One license is required for each installation of the software.Trial licenseA trial license supports "short-term use" of the software in a nonproductivecontext, e.g. for testing and evaluation purposes.It can be transferred to another license.Factory licenseWith the Factory License the user has the right to install and usethe software at one permanent establishment only. The permanentestablishment is defined by one address only.The numberof hardware devices on which the software may be installedresults from the order data or the Certificate of License (CoL).Certificate of licenseThe Certificate of License (CoL) is the licensee's proof that theuse of the software has been licensed by Siemens. A CoL isrequired for every type of use and must be kept in a safe place.DowngradingThe licensee is permitted to use the software or an earlier version/releaseof the software, provided that the licensee ownssuch a version/release and its use is technically feasible.Delivery versionsSoftware is constantly being updated.The following delivery versions• PowerPack• Upgradecan be used to access updates.Existing bug fixes are supplied with the ServicePack version.PowerPackPowerPacks can be used to upgrade to more powerful software.The licensee receives a new license agreement and CoL(Certificate of License) with the PowerPack. This CoL, togetherwith the CoL for the original product, proves that the new softwareis licensed.A separate PowerPack must be purchased for each originallicense of the software to be replaced.UpgradeAn upgrade permits the use of a new version of the software onthe condition that a license for a previous version of the productis already held.The licensee receives a new license agreement and CoL withthe upgrade. This CoL, together with the CoL for the previousproduct, proves that the new version is licensed.A separate upgrade must be purchased for each original licenseof the software to be upgraded.ServicePackServicePacks are used to debug existing products.ServicePacks may be duplicated for use as prescribed accordingto the number of existing original licenses.License keySiemens Industry Automation & Drive Technologies suppliessoftware products with and without license keys.The license key serves as an electronic license stamp andis also the "switch" for activating the software (floating license,rental license, etc.).The complete installation of software products requiring licensekeys includes the program to be licensed (the software) and thelicense key (which represents the license).Detailed explanations concerning license conditions can be found in the“Terms and Conditions of Siemens AG” or underhttp://www.siemens.com/automation/mall(Industry Mall Online-Help System)I IA&DT/Software licenses/En 02.12.0914/14 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixIndexPagePagePageAAdditional documentation ........................ 14/5Analog modules .............................. 4/64, 5/31Automation Value Card ........................... 14/13BBasic Panels ............................................. 4/91CCatalog improvement suggestions ......... 14/17CE marking ............................................... 14/7Central processing units ...................... 4/5, 5/2Certificates ............................................... 14/8CFC ............................................................ 7/8CM 1241 communication module ............. 4/83Communication ........................ 3/2, 4/83, 5/45Communications software .......................... 8/5Conditions of sale and delivery .............. 14/20CP 243-1 ..................................................... 3/2CP 341 ...................................................... 5/46CP 343-1 BACnet ..................................... 5/54CP 343-1 ERPC ........................................ 5/50CP53M0 communications module ............ 12/2CPU 1211C ................................................. 4/5CPU 1212C ............................................... 4/15CPU 1214C ............................................... 4/25CPU 312 ..................................................... 5/2CPU 314 ..................................................... 5/2CPU 315-2 DP ............................................ 5/2CPU 315-2 PN/DP ....................................... 5/2CPU 315F-2 DP ........................................ 5/17CPU 315F-2 PN/DP ................................... 5/17CPU 317-2 PN/DP ....................................... 5/3CPU 317F-2 PN/DP ................................... 5/18CPU551 processor module ...................... 12/2CSM 1277 unmanaged ............................ 4/85CSM 377 unmanaged .............................. 5/57DD7-SYS ..................................................... 7/11Digital modules ......................................... 4/41Drive ES engineering software ................. 7/12EEmbedded Automation ............................... 9/2Engineering tools ........................................ 7/8Export regulations .................................. 14/20FF digital / analog modules ........................ 5/34Fail-safe CPUs ................................. 5/17, 5/18Fax form .................................................. 14/17Field PG M2 ................................................ 8/2Function modules ..................................... 5/41HHuman machine interface .......................... 3/5IIM 174 PROFIBUS module ....................... 5/41Index ....................................................... 14/15Information and Orderingin the Internet and on DVD ..................... 14/11Introduction ................................................. 4/2KAutomation Value Card ........................... 14/13KNX/EIB2S7 .............................................. 7/26LLOGO! Modular .......................................... 2/2LOGO! Modularanalog expansion modules .................... 2/8MModular PID control .................................. 7/19OOnline Services .......................................14/11OPC server for Industrial Ethernet ............8/11Operator control and monitoring ...............4/91Ordering data summary ..........................14/16PPartner at Industry Automationand Drive Technologies ........................14/9PC-based Control .....................................9/28PM 1207 power supply .............................4/89PN CBA OPC server .................................8/13Power supplies ................................4/89, 5/59Premium Studio .........................................7/25PRODAVE MPI ..........................................7/22Programming devices .................................8/2QQuality management .................................14/8RRuntime software ......................................7/18SS7 F Systems ............................................7/13S7-1200 .......................................................4/2S7-REDCONNECT ......................................8/7SB 1221 digital input module ....................4/44SB 1222 digital output module .................4/50SB 1223 digital input/output module ........4/57SB 1232 analog output module ................4/70Service & Support ...................................14/12Services covering the entire life cycle ....14/12Siemens contacts worldwide ....................14/9Siemens Solution PartnerAutomation, Power Distributionand PLM ..............................................14/10SIM 1274 simulator ...................................4/82SIMATIC ET 200 ........................................11/2SIMATIC ET 200 Configuratorin the SIMATIC Selection Tool ...................11/2SIMATIC ET 200eco PN ............................11/2SIMATIC HMI IPC477C embedded ..........9/14SIMATIC iMap .............................................7/9SIMATIC IPC427C bundles .......................9/12SIMATIC Maintenance Station ..................7/23SIMATIC Manual Collection ......................14/6SIMATIC Panel PC 477B Bundles .............9/20SIMATIC PDMprocess device manager ......................7/15SIMATIC S7 modularembedded controller ..............................9/2SIMATIC TDC ............................................12/2SIMATIC WinAC MP ..................................9/24SIMATIC WinAC ODK ...............................9/40SIMATIC WinAC RTX .................................9/28SIMATIC WinAC RTX F ..............................9/34SIPLUS analog modules ....................4/79, 6/4SIPLUS central processing units .......4/35, 6/2SIPLUS CM 1241communication module ........................4/88SIPLUS communication ............................4/88SIPLUS CP 340 .........................................5/45SIPLUS CP 341 .........................................5/48SIPLUS CP 343-1 Lean .............................5/49SIPLUS CPU 1211C ..................................4/35SIPLUS CPU 1212C ..................................4/36SIPLUS CPU 1214C ..................................4/37SIPLUS CPU 417H ......................................6/2SIPLUS digital modules ...................4/61, 5/30SIPLUS digital modules SM 1221 .............4/61SIPLUS digital modules SM 1222 .............4/61SIPLUS digital modules SM 1223 .............4/62SIPLUS F digital-/analog modules ............5/39SIPLUS LOGO! Modularbasic versions ........................................ 2/2SIPLUS LOGO! Modularexpansion modules ................................ 2/9SIPLUS LOGO! ModularPure versions .......................................... 2/5SIPLUS PM 1207 power supply ............... 4/90SIPLUS power supplies ............................ 4/90SIPLUS SB 1223digital input/output module .................. 4/63SIPLUS SB 1232analog output module .......................... 4/81SIPLUS SIWAREX U ................................. 5/44SIPLUS SM 1221digital input module .............................. 4/61SIPLUS SM 1222digital output module ........................... 4/61SIPLUS SM 1223digital input/output module .................. 4/62SIPLUS SM 1231analog input module ............................ 4/79SIPLUS SM 1232analog output module .......................... 4/79SIPLUS SM 1234analog input/output module ................. 4/80SIPLUS SM 322 digital output module ..... 5/30SIPLUS SM 326 F digital input module .... 5/39SIPLUS SM 336 F analog input module ... 5/40SIPLUS SM 431 analog input modules ...... 6/4SIPLUS sync module .................................. 6/3SITRAIN Certification Program ................. 14/3SM 1231 analog input module ................. 4/64SM 1231 RTD signal module .................... 4/77SM 1231 Thermocouple module .............. 4/75SM 1232 analog output module ............... 4/67SM 326 F digital input module -Safety Integrated .................................. 5/34SM 326 F digital output module -Safety Integrated .................................. 5/36SM 331 analog input module ................... 5/31SM 1221 digital input module .................. 4/41SM 1222 digital output module ................ 4/46SM 1223 digital input/output module ....... 4/52SM 1234 analog input/output module ...... 4/72SNMP OPC server .................................... 8/15SOFTNET for Industrial Ethernet ................ 8/8SOFTNET for PROFIBUS ............................ 8/5SOFTNET PN IO ......................................... 8/9Software ................................................... 4/98Software Licenses .................................. 14/14Special modules ....................................... 4/82Standard CPUs ................................... 5/2, 5/3Standard PID control ................................ 7/18Standard tools ............................................ 7/2Standards and approbations ................... 14/7STEP 7 ........................................................ 7/4STEP 7 Basic .............................................. 7/2STEP 7 Professional ................................... 7/7Power supplies ................................ 5/59, 5/61Supplementary Components ................... 7/26TTechnical booksfor automation engineering ......... 14/5, 14/6Text Display TD 400C ................................. 3/5Training ..................................................... 14/2VVersion Cross Manager ............................ 7/14Version Trail .............................................. 7/1414Siemens ST 70 N · 201014/15

AppendixOrdering data summary© Siemens AG 2010Order No.PageOrder No.PageOrder No.Page142XV92XV9 450 .................................................. 5/336AG16AG1 052 ............................................ 2/4, 2/76AG1 053 ............................................ 2/4, 2/76AG1 055 ................................... 2/4, 2/7, 2/116AG1 057 ............................................ 2/4, 2/76AG1 211 ................................................. 4/386AG1 212 ........................................ 4/38, 4/396AG1 214 ........................................ 4/39, 4/406AG1 221 ................................................. 4/626AG1 222 ................................................. 4/626AG1 223 ........................................ 4/62, 4/636AG1 231 ................................................. 4/806AG1 232 ........................................ 4/80, 4/816AG1 234 ................................................. 4/806AG1 241 ................................................. 4/886AG1 322 ................................................. 5/306AG1 326 ................................................. 5/396AG1 332 ................................................. 4/906AG1 336 ................................................. 5/406AG1 340 ................................................. 5/456AG1 341 ................................................. 5/486AG1 343 ................................................. 5/496AG1 417 ................................................... 6/26AG1 431 ................................................... 6/46AG1 950 ................................................. 5/446AG1 960 ................................................... 6/36AG46AG4 070 ........................................ 9/13, 9/236AV66AV6 640 .................................................... 3/56AV6 643 .................................................. 7/266AV6 647 .................................................. 4/966AV6 651 .................................................. 4/966AV6 652 ................................ 4/96, 9/26, 9/276AV6 671 .................................. 3/5, 9/19, 9/236AV6 691 .................................................. 4/966AV76AV7 671 ......................................... 9/19, 9/236AV7 672 ......................................... 9/19, 9/236AV7 85 ........................................... 9/22, 9/236AV7 883 ......................................... 9/17, 9/186AV7 884 ................................ 9/16, 9/17, 9/186DD16DD1 600 ................................................. 12/26DD1 610 ................................................. 12/26DD1 660 ................................................. 12/26ED1 050 ............................. 2/4, 2/7, 2/8, 2/116ED1 055 .................................................... 2/86ED1 056 ............................. 2/4, 2/7, 2/8, 2/116ED1 057 ............................. 2/4, 2/7, 2/8, 2/116ED1 058 ............................. 2/4, 2/7, 2/8, 2/116EP16EP1 332 .................................................. 4/896EP1 971 .................................................. 5/616ES56ES5 734 .................................................... 8/46ES76ES7 174 ...................................................5/436ES7 193 ..........................................5/35, 5/376ES7 195 ..........................................5/35, 5/376ES7 211 ...................................................4/136ES7 212 ...................................................4/236ES7 214 ...................................................4/336ES7 221 ...............4/13, 4/23, 4/33, 4/43, 4/456ES7 222 ...............4/13, 4/23, 4/33, 4/49, 4/516ES7 223 ...............4/13, 4/23, 4/33, 4/56, 4/606ES7 231 .................................4/66, 4/76, 4/786ES7 232 ........................4/23, 4/33, 4/69, 4/716ES7 234 ...................................................4/746ES7 241 ...................................................4/846ES7 274 .................................4/13, 4/33, 4/826ES7 290 .......................4/23, 4/33, 4/43, 4/49,....................................4/56, 4/66, 4/69, 4/746ES7 292 .......................4/13, 4/33, 4/43, 4/45,...................................4/49, 4/51, 4/56, 4/60,......................................................4/66, 4/716ES7 298 .........................3/5, 4/14, 4/24, 4/34,...................................4/43, 4/45, 4/49, 4/51,...................................4/56, 4/60, 4/66, 4/69,...................................4/71, 4/74, 4/76, 4/78,......................................................4/82, 4/846ES7 307 .................................5/35, 5/37, 5/616ES7 312 ...................................................5/156ES7 314 ...................................................5/156ES7 315 ..........................................5/15, 5/286ES7 317 ..........................................5/15, 5/286ES7 326 ..........................................5/35, 5/376ES7 328 ...................................................5/336ES7 331 ...................................................5/336ES7 341 ...................................................5/476ES7 390 ...................................................5/336ES7 391 ...................................................5/156ES7 391 ...................................................5/286ES7 392 .................................5/33, 5/35, 5/386ES7 393 ..........................................5/35, 5/386ES7 398 ...............5/15, 5/28, 5/33, 5/35, 5/386ES7 648 ..........................8/4, 9/13, 9/19, 9/236ES7 658 ..........................7/8, 7/14, 7/16, 7/176ES7 671 .................................9/26, 9/33, 9/396ES7 675 ..........................................9/12, 9/136ES7 676 ...................................................9/226ES7 677 ...................................................9/116ES7 713 ..............................................8/3, 8/46ES7 790 ............................................8/4, 9/136ES7 791 .....................................................8/46ES7 792 ..............................................7/6, 7/76ES7 798 .....................................................8/46ES7 806 ...................................................9/406ES7 807 ...................................................7/226ES7 810 .....................3/4, 5/53, 5/56, 7/6, 7/76ES7 815 ...................................................7/256ES7 820 ..........................................7/10, 8/146ES7 822 ................................4/14, 4/24, 4/34,...................................4/43, 4/45, 4/49, 4/51,...................................4/56, 4/60, 4/66, 4/69,....................................4/71, 4/74, 4/76, 4/78...............................................4/82, 4/84, 7/26ES7 830 ..........................................7/18, 7/216ES7 833 ........................5/28, 5/35, 5/37, 7/136ES7 840 ...................................................7/246ES7 852 ...................................................7/116ES7 860 ..........................................7/18, 7/216ES7 870 ...................................................5/476ES7 900 .................................................... 8/46ES7 901 ........................ 3/5, 5/15, 5/28, 5/35,......................................... 5/37, 7/6, 7/7, 8/46ES7 902 ......................................... 5/45, 5/476ES7 910 .................................................. 5/156ES7 912 ......................................... 5/15, 5/286ES7 953 ......................................... 5/15, 5/286ES7 954 ................................ 4/13, 4/23, 4/336ES7 972 ................ 5/15, 5/28, 5/35, 5/37, 7/76ES7 974 .................................................. 5/336ES7 997 ................................................ 14/136ES7 998 ...................... 5/15, 5/28, 5/33, 5/35,........................................ 5/38, 7/6, 7/7, 7/8,........................................... 7/11, 7/18, 7/21,..................................................... 7/22, 14/66FC56FC5 235 ......................................... 9/19, 9/236FL46FL4 343 .................................................. 5/566FX26FX2 002 .................................................. 5/436GK16GK1 160 ............................... 9/13, 9/33, 9/396GK1 161 ................................. 8/7, 9/33, 9/396GK1 162 ................................................... 8/76GK1 500 ........................................ 5/15, 5/286GK1 551 ................................................... 7/66GK1 560 ............................... 9/13, 9/33, 9/396GK1 561 ................................. 7/6, 9/33, 9/396GK1 562 ........................................ 9/33, 9/396GK1 704 ............ 3/4, 5/52, 7/6, 8/6, 8/8, 8/106GK1 706 ............................... 8/12, 8/14, 8/156GK1 716 ................................... 3/4, 5/52, 8/76GK1 900 ................................................. 5/526GK1 901 ....................... 3/4, 4/87, 5/16, 5/29,................................... 5/52, 5/53, 5/56, 5/586GK1 975 ........................................ 4/87, 5/586GK56GK5 204 ........................ 3/4, 5/16, 5/29, 5/566GK5 308 ................................................. 5/536GK76GK7 243 ................................................... 3/46GK7 277 ................................................. 4/876GK7 343 ................................................. 5/526GK7 377 ............................... 5/16, 5/29, 5/586SW16SW1 700 ................................................. 7/126XV16XV1 830 ......................................... 5/15, 5/286XV1 840 ........................ 3/4, 4/87, 5/16, 5/29,............................................ 5/53, 5/56, 5/586XV1 870 ................................ 4/87, 5/53, 5/586XV1 873 .................................. 3/4, 5/16, 5/296XV1 878 .................................................. 5/536ZB36ZB3 500 ......................................... 14/5, 14/614/16 Siemens ST 70 N · 2010

© Siemens AG 2010AppendixCatalog improvement suggestions■ToYour addressFax formSiemens AGI IA CE ITS PRI 1Mr. FregienGleiwitzer Str. 55590475 NürnbergGermanyFax: +49 (911) 895-154830E-mail: dirk.fregien@siemens.comNameJobCompany/DepartmentStreet/No.Postal code/CityTel. No./FaxE-mail address■ Your opinion is important to us!Our catalog should be an important and frequently useddocument. For this reason we are continuously endeavoring toimprove it.A small request on our part to you:Please take time to fill in the following form and fax it to us.Thank You!■ We invite you to grade our catalog on a point system from 1 (= good) to 6 (= poor):Do the contents of the catalog live up to your expectations?Do the technical details meet your expectations?Is the information easy to find?How would you assess the graphics and tables?Can the texts be readily understood?■ Did you find any printing errors?14Siemens ST 70 N · 201014/17

Appendix© Siemens AG 2010■Notes1414/18 Siemens ST 70 N · 2010

© Siemens AG 2010Appendix■Notes14Siemens ST 70 N · 201014/19

© Siemens AG 2010AppendixConditions of sale and delivery, Export regulations■ Terms and Conditions of Sale and DeliveryBy using this catalog you can acquire hardware and softwareproducts described therein from Siemens AG subject to the followingterms. Please note! The scope, the quality and the conditionsfor supplies and services, including software products, byany Siemens entity having a registered office outside of Germany,shall be subject exclusively to the General Terms andConditions of the respective Siemens entity. The following termsapply exclusively for orders placed with Siemens AG.For customers with a seat or registered office in GermanyThe “General Terms of Payment” as well as the “General Conditionsfor the Supply of Products and Services of the Electricaland Electronics Industry” shall apply.For software products, the “General License Conditions for SoftwareProducts for Automation and Drives for Customers with aSeat or registered Office in Germany” shall apply.For customers with a seat or registered office outside ofGermanyThe “General Terms of Payment” as well as the “General Conditionsfor Supplies of Siemens, Automation and Drives for Customerswith a Seat or registered Office outside of Germany” shallapply.For software products, the “General License Conditions for SoftwareProducts for Automation and Drives for Customers with aSeat or registered Office outside of Germany” shall apply.GeneralThe dimensions are in mm. In Germany, according to the Germanlaw on units in measuring technology, data in inches onlyapply to devices for export.Illustrations are not binding.Insofar as there are no remarks on the corresponding pages,- especially with regard to data, dimensions and weights given -these are subject to change without prior notice.The prices are in € (Euro) ex works, exclusive packaging.The sales tax (value added tax) is not included in the prices.It shall be debited separately at the respective rate according tothe applicable legal regulations.Prices are subject to change without prior notice. We will debitthe prices valid at the time of delivery.Surcharges will be added to the prices of products that containsilver, copper, aluminum, lead and/or gold if the respective basicofficial prices for these metals are exceeded. These surchargeswill be determined based on the official price and themetal factor of the respective product.The surcharge will be calculated on the basis of the official priceon the day prior to receipt of the order or prior to the releaseorder.The metal factor determines the official price as of which themetal surcharges are charged and the calculation method used.The metal factor, provided it is relevant, is included with theprice information of the respective products.An exact explanation of the metal factor and the text of theComprehensive Terms and Conditions of Sale and Delivery areavailable free of charge from your local Siemens business officeunder the following Order Nos.:• 6ZB5310-0KR30-0BA1(for customers based in Germany)• 6ZB5310-0KS53-0BA1(for customers based outside Germany)or download them from the Internetwww.siemens.com/industrymall(Germany: Industry Mall Online-Help System)■ Export regulationsThe products listed in this catalog / price list may be subject toEuropean / German and/or US export regulations.Therefore, any export requiring a license is subject to approvalby the competent authorities.According to current provisions, the following export regulationsmust be observed with respect to the products featured in thiscatalog / price list:ALECCNNumber of the German Export ListProducts marked other than “N” require an exportlicense.In the case of software products, the export designationsof the relevant data medium must alsobe generally adhered to.Goods labeled with an “AL“ not equal to “N” aresubject to a European or German export authorizationwhen being exported out of the EU.Export Control Classification NumberProducts marked other than “N” are subject to areexport license to specific countries.In the case of software products, the exportdesignations of the relevant data medium mustalso be generally adhered to.Goods labeled with an “ECCN“ not equal to “N”are subject to a US re-export authorization.Even without a label or with an “AL: N” or “ECCN: N”, authorizationmay be required due to the final destination and purpose forwhich the goods are to be used.The deciding factors are the AL or ECCN export authorizationindicated on order confirmations, delivery notes and invoices.Errors excepted and subject to change without prior notice.I IA/DT /VuL_ohne MZ/En 16.03.1014■14/20 Siemens ST 70 N · 2010

© Siemens AG 2010CatalogsIndustry Automation, Drive Technologies and Low Voltage DistributionFurther information can be obtained from our branch offices listedin the appendix or at www.siemens.com/automation/partnerInteractive Catalog on DVDfor Industry Automation, Drive Technologies andLow Voltage DistributionCatalogCA 01Drive SystemsVariable-Speed DrivesSINAMICS G110, SINAMICS G120D 11.1Standard InvertersSINAMICS G110D, SINAMICS G120DDistributed InvertersSINAMICS G130 Drive Converter Chassis Units D11SINAMICS G150 Drive Converter Cabinet UnitsSINAMICS GM150, SINAMICS SM150D12Medium-Voltage ConvertersSINAMICS S120 Chassis Format Units andD 21.3Cabinet ModulesSINAMICS S150 Converter Cabinet UnitsSINAMICS DCM Converter Units D 23.1Three-phase Induction Motors• H-compact• H-compact PLUSD 84.1Asynchronous Motors Standardline D 86.1Synchronous Motors with Permanent-MagnetD 86.2Technology, HT-directDC Motors DA 12SIMOREG DC MASTER 6RA70 Digital Chassis DA 21.1ConvertersSIMOREG K 6RA22 Analog Chassis Converters DA 21.2PDF: SIMOREG DC MASTER 6RM70 Digital Converter DA 22Cabinet UnitsSIMOVERT PM Modular Converter Systems DA 45SIEMOSYN Motors DA 48MICROMASTER 420/430/440 Inverters DA 51.2MICROMASTER 411/COMBIMASTER 411 DA 51.3SIMOVERT MASTERDRIVES Vector Control DA 65.10SIMOVERT MASTERDRIVES Motion Control DA 65.11Synchronous and asynchronous servomotors for DA 65.3SIMOVERT MASTERDRIVESSIMODRIVE 611 universal and POSMO DA 65.4SIMOTION, SINAMICS S120 andPM 21Motors for Production MachinesSINAMICS S110PM 22The Basic Positioning DriveLow-Voltage Three-Phase-MotorsIEC Squirrel-Cage Motors D 81.1MOTOX Geared Motors D 87.1Automation Systems for Machine Tools SIMODRIVE• Motors• Converter Systems SIMODRIVE 611/POSMOAutomation Systems for Machine Tools SINAMICS• Motors• Drive System SINAMICS S120NC 60NC 61Drive and Control Components for Hoisting Equipment HE 1Mechanical Driving MachinesFlender Standard Couplings MD 10.1Electrical Installation TechnologyPDF: ALPHA Distribution Boards and Terminal BlocksPDF: ALPHA 8HP Molded-Plastic Distribution SystemPDF: BETA Low-Voltage Circuit ProtectionPDF: DELTA Switches and Socket OutletsPDF: GAMMA Building Management SystemsET A1ET A3ET B1ET D1ET G1Motion ControlSINUMERIK & SIMODRIVEAutomation Systems for Machine ToolsSINUMERIK & SINAMICSEquipment for Machine ToolsSIMOTION, SINAMICS S120 andMotors for Production MachinesSINAMICS S110The Basic Positioning DriveCatalogNC 60NC 61PM 21PM 22Low-VoltageControls and Distribution –LV 1SIRIUS, SENTRON, SIVACONControls and Distribution –LV 1 TTechnical InformationSIRIUS, SENTRON, SIVACONSICUBE System Cubicles and Cubicle Air-Conditioning LV 50SIDAC Reactors and Filters LV 60SIVACON 8PS Busbar Trunking Systems LV 70Power Supply and System CablingPower supply SITOP KT 10.1System cabling SIMATIC TOP connect KT 10.2Process Instrumentation and AnalyticsField Instruments for Process Automation FI 01PDF: Indicators for panel mounting MP 12SIREC Recorders and Accessories MP 20SIPART, Controllers and Software MP 31PDF: Products for Weighing Technology WT 10Process Analytical Instruments PA 01PDF: Process Analytics,PA 11Components for the System IntegrationSafety IntegratedSafety Technology for Factory AutomationSI I0SIMATIC HMIHuman Machine Interface Systems ST 80SIMATIC Industrial Automation SystemsProducts for Totally Integrated Automation and ST 70Micro AutomationSIMATIC PCS 7 Process Control System ST PCS 7Add-ons for the SIMATIC PCS 7ST PCS 7.1Process Control SystemPDF: Migration solutions with the SIMATIC PCS 7 ST PCS 7.2Process Control SystemPC-based AutomationST PCSIMATIC NETIndustrial CommunicationIK PISIMATIC SensorsSensor Technology for Factory Automation FS 10Industrial Identification Systems ID 10System SolutionsApplications and Products for Industry are part of theinteractive catalog CA 01PDF: These catalogs are only available as pdf files.IA DT LV/3U/En 10.03.10

© Siemens AG 2010Siemens AGIndustry SectorIndustrial Automation SystemsPostfach 48 4890026 NÜRNBERGGERMANYwww.siemens.com/automationSubject to change without prior noticeOrder No. E86060-K4670-A151-A5-76003P.8201.01.03 / Dispo 07900KG 0410 16. VOD 296 En / IWI TSTJPrinted in Germany© Siemens AG 2010The information provided in this catalog containsdescriptions or characteristics of performance which in caseof actual use do not always apply as described or which maychange as a result of further development of the products.An obligation to provide the respective characteristicsshall only exist if expressly agreed in the terms of contract.Availability and technical specifications are subject to changewithout notice.All product designations may be trademarks or productnames of Siemens AG or supplier companies whose use bythird parties for their own purposes could violate the rightsof the owners.