Lift Accessories

More documents

Recommendations

Info

Inflation Station SystemRX-Series <strong>Lift</strong>sThe Inflation Station System Inflates AllCorrect Pressure Simultaneously – Whileor Do Other Tasks! Saves Steps and SaveSet the desired tire pressure atthe rack console.Pressure may be set on a per-axle basis.Connect hoses.The Inflation Station system automaticallydetects being connected and begins filling orbleeding one tire or all four, depending on thepreselected tire pressure.Stations are mounted to the sides of therunways at each wheel position. Each air hoseis a flexible coil with a clip-on chuck.4
Four Tires toYou Raise the <strong>Lift</strong>Time!Fully IntegratedAlignmentSave Steps While Performinga Better JobWhen combined with a FIA-equipped alignment console, setthe desired pressure at either the lift or the alignment console.The Inflation Station system automatically records the startingpressure and final pressure. This can be printed out as part ofthe final alignment printout.Inflation Station allows you to save time by doingother things during the inflation process. Actualtime to fill all four tires may not be appreciablyfaster or slower than a technician doing one tireat a time with a fill hose and gauge.Inflation pressure limited to 60 psi max.The Inflation Station system is availableon the following lifts:✔ RX12XL-IS✔ RX12L-IS✔ RX9L-ISWhen using the Work Management feature on the alignmentconsole, tire pressures (start and final) are stored along withother alignment data.5
Page 1 and 2: Lift AccessoriesFor Hunter Wheel Al
Page 3: Hunter lifts equipped withthe Power
Page 7 and 8: 4,500-lb. Capacity, Dual Composite
Page 9 and 10: Turning Angle Gauge: 25-18-1Standar
Page 11 and 12: Additional Lift AccessoriesOil Drai

Lift Accessories

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?