Lighting Electronics | 2007/08 - National Lamps and Components
12.07.2015 • Views
Share Embed Flag

Lighting Electronics | 2007/08 - National Lamps and Components

Lighting Electronics | 2007/08 - National Lamps and Components

Lighting Electronics | 2007/08 - National Lamps and Components

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
  • No tags were found...
nationallampsandcomponents.co.uk

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaTC-SEL 2G7 Biax S/E Dulux ® S/E PL-SxxW/4P Ralux/E CF-SETC-SELPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology7 W 1 095233 80 40 22 + 177 W 1 096217 82 40 29 + 829 W 1 095233 80 40 22 + 179 W 1 096217 82 40 29 + 829 W 1 097543 103 67 30 + 329 W 1 095043 150 42 30 + 339 W 2 097543 103 67 30 + 329 W 2 095043 150 42 30 + 3311 W 1 095233 80 40 22 + 1711 W 1 097543 103 67 30 + 3211 W 1 095043 150 42 30 + 3311 W 2 097543 103 67 30 + 3211 W 2 095043 150 42 30 + 33Page7

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaTC-DEL TC-TELTC-DELTC-TELG24qGX24qBiax D/EBiax T/EDulux ® D/EDulux ® T/EPL-CxxW/4PPL-TxxW/4PRalux duo/ERalux trio/ECF-DECF-TEPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology10 W 1 095243 62 62 56 + 2010 W 1 095233 80 40 22 + 1710 W 1 096217 82 40 29 + 8210 W 1 097543 103 67 30 + 3210 W 1 095043 150 42 30 + 3310 W 2 097543 103 67 30 + 3210 W 2 095043 150 42 30 + 3313 W 1 095243 62 62 56 + 2013 W 1 095233 80 40 22 + 1713 W 1 097543 103 67 30 + 3213 W 1 097574 103 67 30 1...10V 3913 W 1 095043 150 42 30 + 3313 W 2 097543 103 67 30 + 3213 W 2 097584 123 79 33 1...10V 4513 W 2 095043 150 42 30 + 3318 W 1 095244 62 62 56 2118 W 1 095234 80 40 22 1818 W 1 097534 103 67 30 2218 W 1 097544 103 67 30 + 3418 W 1 097575 103 67 30 1...10V 3918 W 1 097875 123 79 33 DALI 4918 W 1 095044 150 42 30 + 3418 W 2 097544 103 67 30 + 3418 W 2 097585 123 79 33 1...10V 4618 W 2 097885 123 102 33 DALI 5318 W 2 095044 150 42 30 + 3426 W 1 095235 80 40 22 + 1926 W 1 097535 103 67 30 + 2326 W 1 097545 103 67 30 + 3526 W 1 097570 103 67 30 1...10V + 4026 W 1 497535 103 67 30 + 2326 W 1 097548 123 79 33 + 3726 W 1 097870 123 79 33 DALI + 5026 W 1 095045 150 42 30 + 3626 W 2 097545 103 67 30 + 3526 W 2 097548 123 79 33 + 3726 W 2 097555 123 79 33 + 3826 W 2 097580 123 102 33 1...10V + 4726 W 2 097586 123 79 33 1...10V 4626 W 2 097880 123 102 33 DALI + 5426 W 2 095045 150 42 30 + 3632 W 1 097570 103 67 30 1...10V + 4032 W 1 097535 103 67 30 + 2332 W 1 097545 103 67 30 + 3532 W 1 497535 103 67 30 + 2332 W 1 097870 123 79 33 DALI + 5032 W 1 097548 123 79 33 + 3732 W 1 095045 150 42 30 + 3632 W 2 097580 123 102 33 1...10V + 4732 W 2 097880 123 102 33 DALI + 5432 W 2 097548 123 79 33 + 3732 W 2 097555 123 79 33 + 3842 W 1 097570 103 67 30 1...10V + 4042 W 1 097535 103 67 30 + 2342 W 1 097545 103 67 30 + 3542 W 1 497535 103 67 30 + 2342 W 1 097870 123 79 33 DALI + 5042 W 1 097548 123 79 33 + 3742 W 1 095045 150 42 30 + 3642 W 2 097580 123 102 33 1...10V + 4742 W 2 097880 123 102 33 DALI + 5442 W 2 097548 123 79 33 + 3757 W 1 097539 103 67 30 2457 W 1 097571 123 79 33 1...10V + 4170 W 1 097571 123 79 33 1...10V + 4170 W 1 097540 123 79 33 24Page8

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaTC-LTC-F2G112G10Biax LDulux ® LDulux ® FPL-LPL-TxxW/4PRalux longRalux twinCF-L/LECF-FPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology18 W 1 097516 103 67 30 1...10V + 4218 W 1 097535 103 67 30 + 2318 W 1 097545 103 67 30 + 3518 W 1 497535 103 67 30 + 2318 W 1 097816 123 79 33 DALI + 5118 W 1 095045 150 42 30 + 3618 W 2 097545 103 67 30 + 3518 W 2 097526 123 79 33 1...10V + 4818 W 2 097826 123 102 33 DALI + 5518 W 2 097555 123 79 33 + 3818 W 2 095045 150 42 30 + 3618 W 3 097161 280 39 21 + 7518 W 4 097161 280 39 21 + 7524 W 1 095235 80 40 22 + 1924 W 1 097516 103 67 30 1...10V + 4224 W 1 097535 103 67 30 + 2324 W 1 097545 103 67 30 + 3524 W 1 497535 103 67 30 + 2324 W 1 097816 123 79 33 DALI + 5124 W 1 095045 150 42 30 + 3624 W 1 097367 360 30 21 Switch Control + 7124 W 2 097545 103 67 30 + 3524 W 2 097526 123 79 33 1...10V + 4824 W 2 097826 123 102 33 DALI + 5524 W 2 097555 123 79 33 + 3824 W 2 095045 150 42 30 + 3624 W 2 097377 430 30 21 Switch Control + 7124 W 3 097161 280 39 21 + 7536 W 1 097437 103 67 30 + 2836 W 1 097535 103 67 30 + 2336 W 1 497535 103 67 30 + 2336 W 1 097427 150 42 30 + 2936 W 1 097206 280 30 21 + 5736 W 1 097177 360 30 21 Switch Control + 8136 W 2 097216 360 30 21 + 6136 W 2 097187 430 30 21 Switch Control + 8140 W 1 097535 103 67 30 + 2340 W 1 097545 103 67 30 + 3540 W 1 497535 103 67 30 + 2340 W 1 095045 150 42 30 + 3640 W 1 097206 280 30 21 + 5740 W 1 097368 360 30 21 Switch Control + 7140 W 2 097555 123 79 33 + 3840 W 2 097216 360 30 21 + 6140 W 2 097378 430 30 21 Switch Control + 7155 W 1 097634 103 67 30 + 2555 W 1 097864 123 79 33 DALI + 5255 W 1 097079 280 30 21 1...10V 4555 W 1 097039 280 30 21 3155 W 1 097209 280 30 21 + 5955 W 1 097078 360 30 21 Switch Control 7155 W 2 097<strong>08</strong>9 360 30 21 1...10V 4955 W 2 097058 360 30 21 3155 W 2 097<strong>08</strong>8 430 30 21 Switch Control 7180 W 1 097209 280 30 21 + 5980 W 1 097371 360 30 21 Switch Control + 71PageTC-DEL TC-TELTC-L TC-F9

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaTC-DDTC-DD GR10q Biax 2DPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology10 W 1 097543 103 67 30 + 3210 W 1 095043 150 42 30 + 3310 W 2 097543 103 67 30 + 3210 W 2 095043 150 42 30 + 3316 W 1 097543 103 67 30 + 3216 W 1 095043 150 42 30 + 3316 W 2 097543 103 67 30 + 3216 W 2 095043 150 42 30 + 3328 W 1 095238 80 40 22 2628 W 1 097475 103 67 30 1...10V 4428 W 1 097436 103 67 30 2728 W 1 097426 150 42 30 + 2738 W 1 097477 103 67 30 1...10V 4438 W 1 097437 103 67 30 + 2838 W 1 097427 150 42 30 + 2955 W 1 097438 123 79 33 30Page10

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaT5c 2GX13 Circline Lumilux ® FC T5cPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology22 W 1 095235 80 40 22 + 1922 W 1 097516 103 67 30 1...10V + 4222 W 1 097535 103 67 30 + 2322 W 1 097545 103 67 30 + 3522 W 1 497535 103 67 30 + 2322 W 1 097816 123 79 33 DALI + 5122 W 1 095045 150 42 30 + 3622 W 2 097545 103 67 30 + 3522 W 2 097555 123 79 33 + 3822 W 2 095045 150 42 30 + 3640 W 1 097516 103 67 30 1...10V + 4240 W 1 097535 103 67 30 + 2340 W 1 097545 103 67 30 + 3540 W 1 497535 103 67 30 + 2340 W 1 097816 123 79 33 DALI + 5140 W 1 095045 150 42 30 + 3640 W 1 097368 360 30 21 Switch Control + 7140 W 2 097555 123 79 33 + 3840 W 2 097378 430 30 21 Switch Control + 7155 W 1 097634 103 67 30 + 2555 W 1 097674 123 79 33 1...10V 4355 W 1 097864 123 79 33 DALI + 5260 W 1 097635 103 67 30 2660 W 1 097675 123 79 33 1...10V 4360 W 1 097865 123 79 33 DALI 52PageTC-DDT5c (T16-R)11

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaT5 (T16)T5 G5 Starcoat Lumilux ® FH/FQ TL NL FPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology4 W 1 096217 82 40 29 + 826 W 1 095232 80 40 22 + 166 W 1 096217 82 40 29 + 828 W 1 095232 80 40 22 + 168 W 1 096217 82 40 29 + 8213 W 1 095232 80 40 22 + 1614 W 1 095233 80 40 22 + 1714 W 1 097543 103 67 30 + 3214 W 1 095043 150 42 30 + 3314 W 1 097204 280 30 21 + 5614 W 1 097363 360 30 21 Switch Control 7114 W 1 097244 360 30 21 1...10V + 6414 W 2 097543 103 67 30 + 3214 W 2 095043 150 42 30 + 3314 W 2 097214 360 30 21 + 6014 W 2 097294 425 30 21 1...10V + 6814 W 2 097373 430 30 21 Switch Control 7114 W 3 097381 280 39 21 + 6314 W 4 097381 280 39 21 + 6314 W 4 097361 430 30 21 Switch Control 7121 W 1 097543 103 67 30 + 3221 W 1 095043 150 42 30 + 3321 W 1 097204 280 30 21 + 5621 W 1 097364 360 30 21 Switch Control 7121 W 1 097244 360 30 21 1...10V + 6421 W 2 097214 360 30 21 + 6021 W 2 097294 425 30 21 1...10V + 6821 W 2 097374 430 30 21 Switch Control 7124 W 1 097535 103 67 30 + 2324 W 1 097545 103 67 30 + 3524 W 1 497535 103 67 30 + 2324 W 1 095045 150 42 30 + 3624 W 1 097206 280 30 21 + 5724 W 1 097367 360 30 21 Switch Control + 7124 W 1 097246 360 30 21 1...10V + 6524 W 2 097545 103 67 30 + 3524 W 2 095045 150 42 30 + 3624 W 2 097216 360 30 21 + 6124 W 2 097296 425 30 21 1...10V + 6924 W 2 097377 430 30 21 Switch Control + 7124 W 3 097161 280 39 21 + 7528 W 1 097204 280 30 21 + 5628 W 1 097365 360 30 21 Switch Control 7128 W 1 097244 360 30 21 1...10V + 6428 W 2 097214 360 30 21 + 6028 W 2 097294 425 30 21 1...10V + 6828 W 2 097375 430 30 21 Switch Control 7135 W 1 097204 280 30 21 + 5635 W 1 097366 360 30 21 Switch Control 7135 W 1 097244 360 30 21 1...10V + 6435 W 2 097214 360 30 21 + 6035 W 2 097294 425 30 21 1...10V + 6835 W 2 097376 430 30 21 Switch Control 7139 W 1 097535 103 67 30 + 2339 W 1 097545 103 67 30 + 3539 W 1 497535 103 67 30 + 2339 W 1 095045 150 42 30 + 3639 W 1 097206 280 30 21 + 5739 W 1 097368 360 30 21 Switch Control + 7139 W 1 097246 360 30 21 1...10V + 6539 W 2 097216 360 30 21 + 6139 W 2 097296 425 30 21 1...10V + 6939 W 2 097378 430 30 21 Switch Control + 7149 W 1 097207 280 30 21 5849 W 1 097369 360 30 21 Switch Control 7149 W 1 097247 360 30 21 1...10V 6649 W 2 097217 360 30 21 6249 W 2 097297 425 30 21 1...10V 7049 W 2 097379 430 30 21 Switch Control 7154 W 1 0972<strong>08</strong> 280 30 21 5854 W 1 097370 360 30 21 Switch Control 7154 W 1 097248 360 30 21 1...10V 6654 W 2 097218 360 30 21 6254 W 2 097298 425 30 21 1...10V 7054 W 2 097380 430 30 21 Switch Control 7180 W 1 097209 280 30 21 + 5980 W 1 097371 360 30 21 Switch Control + 7180 W 1 097249 360 30 21 1...10V 67Page12

St<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaT8 G13 Polylux Lumilux ® TL NL FPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology15 W 1 097535 103 67 30 + 2315 W 1 097545 103 67 30 + 3515 W 1 497535 103 67 30 + 2315 W 1 095045 150 42 30 + 3615 W 2 097545 103 67 30 + 3515 W 2 095045 150 42 30 + 3615 W 3 097161 280 39 21 + 7515 W 4 097161 280 39 21 + 7518 W 1 097535 103 67 30 + 2318 W 1 097545 103 67 30 + 3518 W 1 497535 103 67 30 + 2318 W 1 095045 150 42 30 + 3618 W 1 097113 280 30 21 7218 W 1 097176 360 30 21 Switch Control 8118 W 1 097143 360 30 21 1...10V 7618 W 2 097545 103 67 30 + 3518 W 2 095045 150 42 30 + 3618 W 2 097123 280 30 21 7318 W 2 097193 425 30 21 1...10V 7818 W 2 097186 430 30 21 Switch Control 8118 W 3 097161 280 39 21 + 7518 W 4 097161 280 39 21 + 7518 W 4 097172 430 30 21 Switch Control 8130 W 1 097426 150 42 30 + 2736 W 1 097535 103 67 30 + 2336 W 1 097545 103 67 30 + 3536 W 1 497535 103 67 30 + 2336 W 1 095045 150 42 30 + 3636 W 1 097427 150 42 30 + 2936 W 1 097114 280 30 21 7236 W 1 097177 360 30 21 Switch Control + 8136 W 1 097144 360 30 21 1...10V 7736 W 2 097124 280 30 21 7436 W 2 097194 425 30 21 1...10V 7936 W 2 097187 430 30 21 Switch Control + 8138 W 1 097535 103 67 30 + 2338 W 1 097545 103 67 30 + 3538 W 1 497535 103 67 30 + 2338 W 1 095045 150 42 30 + 3658 W 1 097115 280 30 21 7358 W 1 097178 360 30 21 Switch Control 8158 W 1 097145 360 30 21 1...10V 7858 W 2 097125 280 30 21 7458 W 2 097195 425 30 21 1...10V 8058 W 2 097188 430 30 21 Switch Control 81PageSt<strong>and</strong>ard Lamp Holder GE <strong>Lighting</strong> Osram Philips Radium SylvaniaT12(T38)G13St<strong>and</strong>ardHalosphateLPower(W)Number HÜCO No. Length(mm)Width(mm)Height(mm)InterfaceMultipower-Technology40 W 1 097535 103 67 30 + 2340 W 1 097545 103 67 30 + 3540 W 1 497535 103 67 30 + 2340 W 1 095045 150 42 30 + 36PageT513T8 T12 (T38)

List of numbersHÜCO No. Description Page HÜCO Nr. Description Page095043 BL-HP 1/2 x 9-21W HS Twingle 33095044 BL-HP 1/2 x 18W TC-DEL/TEL HS Twingle 34095045 BL-HP 1/2 x 15-42W HS Twingle 36095232 BL 1x6-13W HMC Minipower 16095233 BL 1x7-13W HMC Minipower 17095234 BL 1x18W TC-DEL/TEL HMC Minipower 18095235 BL 1x22-26W TC-DEL/TEL HMC Minipower 19095238 BL 1x28W TC-DD HMC Minipower 26095243 BL 1x10-13W HMC Minipower i 20095244 BL 1x18W TC-DEL/TEL HMC Minipower i 21095613 BL-HP 1x35W HID HC3 83095617 BL-HP 1x70W HID HC3 83095623 BL-HP 1x35W HID HC3 2C 84095624 BL-HP 1x35W HID HC3 1C 84095627 BL-HP 1x70W HID HC3 2C 85095628 BL-HP 1x70W HID HC3 1C 85096001 DIMMER 60-750W A-DIM 90096217 BL 4-10W 12V 82096507 Multibox HMB 260 VPE 50 pcs 91096719 ET 6-WAY CONNECTOR 89096761 ET 20-70VA LE 86096816 ET 20-105VA LE/TE 86096835 ET 20-105VA LE „HANDY“ 87096851 ET 100-210VA LE 89096860 ET 50-150VA Le 88097039 BL-HP 1x55W TC-L MS2 31097058 BL-HP 2x55W TC-L MS2 31097078 BL-HP 1x55W TC-L MS A-DIM 71097079 BL-HP 1x55W TC-L MS3 A-DIM 45097<strong>08</strong>8 BL-HP 2x55W TC-L MS A-DIM 71097<strong>08</strong>9 BL-HP 2x55W TC-L MS3 A-DIM 49097113 BL-HP 1x18W T8 MS3 72097114 BL-HP 1x36W T8 MS3 72097115 BL-HP 1x58W T8 MS3 73097123 BL-HP 2x18W T8 MS3 73097124 BL-HP 2x36W T8 MS3 74097125 BL-HP 2x58W T8 MS3 74097143 BL-HP 1x18W T8 MS3 A-DIM 76097144 BL-HP 1x36W T8 MS3 A-DIM 77097145 BL-HP 1x58W T8 MS3 A-DIM 78097161 BL-HP 3/4x15-24W MS3 75097172 BL-HP 4x18W T26 MS A-DIM 81097176 BL-HP 1x18W T26 MS A-DIM 81097177 BL-HP 1x36W T26/TC-L MS A-DIM 81097178 BL-HP 1x58W T26 MS A-DIM 81097186 BL-HP 2x18W T26 MS A-DIM 81097187 BL-HP 2x36W T26/TC-L MS A-DIM 81097188 BL-HP 2x58W T26 MS A-DIM 81097193 BL-HP 2x18W T8 MS3 A-DIM 78097194 BL-HP 2x36W T8 MS3 A-DIM 79097195 BL-HP 2x58W T8 MS3 A-DIM 80097204 BL-HP 1x14-35W T5 MS2 56097206 BL-HP 1x24-40W T5 / TC-F/L MS2 57097207 BL-HP 1x49W T5 MS2 580972<strong>08</strong> BL-HP 1x54W T5 MS2 58097209 BL-HP 1x55/80W T5 / TC-L MS2 59097214 BL-HP 2x14-35W T5 MS2 60097216 BL-HP 2x24-40W T5 / TC-F/L 61097217 BL-HP 2x49W T5 MS2 62097218 BL-HP 2x54W T5 MS2 62097244 BL-HP 1x14-35W T5 MS3 A-DIM 64097246 BL-HP 1x24/39W T5 MS3 A-DIM 65097247 BL-HP 1x49W T5 MS3 A-DIM 66097248 BL-HP 1x54W T5 MS3 A-DIM 66097249 BL-HP 1x80W T5/TC-L MS3 A-DIM 67097294 BL-HP 2x14-35W T5 MS3 A-DIM 68097296 BL-HP 2x24/39W T5 MS3 A-DIM 69097297 BL-HP 2x49W T5 MS3 A-DIM 70097298 BL-HP 2x54W T5 MS3 A-DIM 70097361 BL-HP 4x14W T5 MS A-DIM 71097363 BL-HP 1x14W T16 MS A-DIM 71097364 BL-HP 1x21W T16 MS A-DIM 71097365 BL-HP 1x28W T16 MS A-DIM 71097366 BL-HP 1x35W T16 MS A-DIM 71097367 BL-HP 1x24W T16 MS A-DIM 71097368 BL-HP 1x39W T16 MS A-DIM 71097369 BL-HP 1x49W T16 MS A-DIM 71097370 BL-HP 1x54W T16 MS A-DIM 71097371 BL-HP 1x80W T16 MS A-DIM 71097373 BL-HP 2x14W T16 MS A-DIM 71097374 BL-HP 2x21W T16 MS A-DIM 71097375 BL-HP 2x28W T16 MS A-DIM 71097376 BL-HP 2x35W T16 MS A-DIM 71097377 BL-HP 2x24W T16 MS A-DIM 71097378 BL-HP 2x39W T16 MS A-DIM 71097379 BL-HP 2x49W T16 MS A-DIM 71097380 BL-HP 2x54W T16 MS A-DIM 71097381 BL-HP 3/4x14W T5 MS3 63097426 BL-HP 1x28W TC-DD HS 27097427 BL-HP 1x36-38W TC-DD HS 29097436 BL-HP 1x28W TC-DD HC 27097437 BL-HP 1x38W TC-DD HC 28097438 BL-HP 1x55W TC-DD HC 30097475 BL-HP 1x28W TC-DD HC A-DIM 44097477 BL-HP 1x38W TC-DD HC A-DIM 44097516 BL-HP 1x18-40W HC A-DIM 42097526 BL-HP 2x18/42W TC-L/F HC A-DIM 48097534 BL 1x18W TC-DEL/TEL HC 22097535 BL 1x15-42W HC 23097539 BL-HP 1x57W TC-TEL HC 24097540 BL-HP 1x70W TC-TEL HC 24097543 BL-HP 1/2 x 9-21W HC Twingle 32097544 BL-HP 1/2 x 18W TC-DEL/TEL HC Twingle 34097545 BL-HP 1x15-42W/2x15-26W HC Twingle 35097548 BL-HP 1/2 x 26-42W HC Twingle 37097555 BL-HP 2x18-40W HC 38097570 BL-HP 1x26-42W TC-DEL/TEL HC A-DIM 40097571 BL-HP 1x57/70W TC-TEL HC A-DIM 41097574 BL-HP 1x13W TC-DEL/TEL HC A-DIM 39097575 BL-HP 1x18W TC-DEL/TEL HC A-DIM 39097580 BL-HP 2x26-42W TC-DEL/TEL HC A-DIM 47097584 BL-HP 2x13W TC-DEL/TEL HC A-DIM 45097585 BL-HP 2x18W TC-DEL/TEL HC A-DIM 46097586 BL-HP 2x26W TC-DEL/TEL HC A-DIM 46097634 BL-HP 1x55W T5c HC 25097635 BL-HP 1x60W T5c HC 26097674 BL-HP 1x55W T5c TC A-DIM 43097675 BL-HP 1x60W T5c HC A-DIM 43097816 BL-HP 1x18-40W HC D-DIM 51097826 BL-HP 2x18/24W TC-L/F HC D-DIM 55097864 BL-HP 1x55W T5c/TC-L HC D-DIM 52097865 BL-HP 1x60W T5c HC D-DIM 52097870 BL-HP 1x26-42W TC-DEL/TEL HC D-DIM 50097875 BL-HP 1x18W TC-DEL/TEL HC D-DIM 49097880 BL-HP 2x26-42W TC-DEL/TEL HC D-DIM 54097885 BL-HP 2x18W TC-DEL/TEL HC D-DIM 5314 Subject to technical modifications

Manual HÜCO Online-CatalogueExample: I search for an electronic Ballast: 1x21W T51At: www.products.hueco.bizyou enter our online catalogue<strong>Lighting</strong> <strong>Electronics</strong>2On this page you can search for the characteristics of the ballasts. Our example:Number of lamps: 1 Type of lamp: T5 Power: 21W3In this page you can see all ballastsaccording to your selection.Select your preferred ballast34You have reached the right ballast5www.hueco.com 15

BL 1x6-13W HMC MinipowerArticle Number: 09 5232T5Product Highlights• Alternative design to magenetic ballast• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Safe operation under emergency conditions 176-276V DC• Power reduction under DC conditions• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000h at tcmax. /ta max.• Lifetime 60.000h at ta = 45°CApproved lamp combinationsW6 W 8 W 13 WT5Combination ENEC certifiedRated input current (230V)T5 6 W 0,06 AT5 8 W 0,<strong>08</strong> AT5 13 W 0,11 AAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT5see table230 - 240 V~0/50...60 Hz176 - 276 V-15°C...+55 °C1A2> 0,55c80 x 40 x 22 mmca. 38 gVDE, ENECTechnical Drawing807060,44,2704,2224016Subject to technical modification

BL 1x7-13W HMC MinipowerTC-SELArticle Number: 09 5233Product Highlights• Alternative design to magenetic ballast• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Safe operation under emergency conditions 176-276V DC• Power reduction under DC conditions• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000h at tcmax. /ta max.• Lifetime 60.000h at ta = 45°CApproved lamp combinationsTC-DELTC-TELTC-SELT5WCombination ENEC certifiedRated input current (230V)TC-DEL 10 W 0,<strong>08</strong> ATC-DEL 13 W 0,11 ATC-TEL 13 W 0,11 A7 W 9 W 10 W 11 W 13 W 14WTC-SEL 7 W 0,06 ATC-SEL 9 W 0,<strong>08</strong> ATC-SEL 11 W 0,11 ATC-DELTC-TELT5Additional Product HighlightsEN 60929 EN 61000-3-2ECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table230 - 240 V~0/50...60 Hz176 - 276 V-15°C...+55 °C1A2/A3> 0,55c80 x 40 x 22 mmca. 38 gVDE, ENECTechnical Drawing807060,44,2704,22240www.hueco.com 17

BL 1x18W TC-DEL/TEL HMC MinipowerTC-DELTC-TELArticle Number: 09 5234Product Highlights• Alternative design to magenetic ballast• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Safe operation under emergency conditions 176-276V DC• Ignition time approx. 1,0 Sek.• Power reduction under DC conditions• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000h attc max. /ta max.• Lifetime 60.000h at ta = 40°CAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markTC-DEL/TEL18W230 - 240 V~0/50...60 Hz0,14 A176 - 276 V-15°C...+50 °C1A2> 0,57c80 x 40 x 22 mmca. 40 gVDE, ENECTechnical Drawing807060,44,2704,2224018Subject to technical modification

BL 1x22-26W TC-DEL/TEL HMC MinipowerArticle Number: 09 5235Product Highlights• Alternative design to magenetic ballast• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Safe operation under emergency conditions 176-276V DC• Ignition time approx. 1,0 Sek.• Power reduction under DC conditions• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000h attc max. /ta max.• Lifetime 60.000h at ta = 40°CApproved lamp combinationsT5cTC-LTC-FTC-TELTC-DELW22 W 24 W 26WCombination ENEC certifiedRated input current (230V)TC-DEL/TEL 26 W 0,22 ATC-L/F 24 W 0,20 AT5c 22 W 0,20 ATC-DELTC-TELTC-LTC-FT5cAdditional Product HighlightsEN 60929 EN 61000-3-2ECGno dimTechnical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table230 - 240 V~0/50...60 Hz0,14 A176 - 276 V-15°C...+50 °C1A2> 0,55c80 x 40 x 22 mmca. 50 gVDE, ENEC, EMVTechnical Drawing807060,44,2704,22240www.hueco.com 19

BL 1x10-13W HMC Minipower iTC-DELTC-TELArticle Number: 09 5243Product Highlights• Minipower i, Ballast with (i)ntegrated lamp-holder• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Ignition time approx. 1,1 Sek.• Safe operation under emergency conditions 176-276V DC• Power reduction under DC conditions• Very good Energy classification (EEI)• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000h attc max./ ta max.• Lifetime 60.000h at ta = 40°CApproved lamp combinationsTC-DELTC-TELW10 W 13 WCombination approvedRated input current (230V)TC-DEL 10 W 0,<strong>08</strong> ATC-DEL 13 W 0,11 ATC-TEL 13 W 0,11 AAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorDiameterHeightWeightTest marksee tablesee table230 - 240 V~0/50...60 Hz176 - 276 V-15°C...+50 °C1A30,56c62 mm56 mmca. 70 gVDETechnical Drawing62565,2513,86220Subject to technical modification

BL 1x18W TC-DEL/TEL HMC Minipower iArticle Number: 09 5244Product Highlights• Minipower i, Ballast with (i)ntegrated lamp-holder• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Ignition time approx. 0,9 Sek.• Safe operation under emergency conditions 176-276V DC• Power reduction under DC conditions• Very good Energy classification (EEI)• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000hat tc max./ ta max.• Lifetime 60.000h at ta = 40°CTC-DELTC-TELAdditional Product HighlightsEN 60929 EN 61000-3-2ECGno dimTechnical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorDiameterHeightWeightTest markTC-DEL/TEL18W230 - 240 V~0/50...60 Hz0,14 A176 - 276 V-15°C...+50 °C1A20,57c62 mm56 mmca. 70 gVDETechnical Drawing62565,2513,862www.hueco.com 21

BL-HP 1x18W TC-DEL/TEL HCTC-DELTC-TELArticle Number: 09 7534Product Highlights• HÜCO compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsECGno dimEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markTC-DEL/TEL18W220 - 240 V~0/50...60 Hz0,<strong>08</strong> A176 - 276 V-20°C...+60 °C1A20,96103 x 67 x 30 mmca. 115 gENEC, VDE, EMVTechnical Drawing10393,54,26757,5110( )4,283.54,227,53022Subject to technical modification

BL-HP 1x15-42W HCArticle Number: 09 7535Product Highlights• HÜCO compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Different connection possibilities for various lamps• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Corrosion ressistant version with lacquered circuit boardOrder number: 49 7535Additional Product HighlightsTechnical DataEN 60929 EN 61000-3-2Approved lamp combinationsTC-DELTC-TELTC-FTC-LT5cT8T5T 12WCombination approved15W 18W 22W 24W 26W 32W 36W 38W 39W 40W 42WRated input current (230V)TC-DEL/TEL 26 W 0,12 ATC-TEL 32 W 0,16 ATC-TEL 42 W 0,21 ATC-L/F 18 W 0,<strong>08</strong> ATC-L/F 24 W 0,11 ATC-L/F 36 W 0,16 ATC-L 40 W 0,19 AT5c 22 W 0,11 ACombination ENEC certifiedT5c 40 W 0,19 AT8 15 W 0,<strong>08</strong> AT8 18 W 0,09 AT8 36 W 0,16 AT8 38 W 0,17 AT5 24 W 0,12 AT5 39 W 0,17 AT12 40 W 0,17 ATC-DELTC-TELTC-LTC-FT5cT5T8T12ECGno dimLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1A20,96103 x 67 x 30 mmca. 120 gENEC, VDE, EMVTechnical Drawing10393,54,2110( )4,283.54,227,5306757,5www.hueco.com 23

TC-TELBL-HP 1x57W TC-TEL HCArticle Number: 09 7539Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 1x70W TC-TEL HCArticle Number: 09 7540Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampTC-TELLampTC-TELPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight57W220 - 240 V~0/50...60 Hz0,27 A176 - 276 V-20°C...+50 °C1A20,98103 x 67 x 30 mmca. 155 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight70W220 - 240 V~0/50...60 Hz0,32 A176 - 276 V-20°C...+50 °C1A20,98123 x 79 x 33 mmca. 195 gTest markENEC, VDE, EMVTest markENEC, VDETechnical DrawingTechnical Drawing10393,54,21231114,54,599110( )4,283.5(129,5)4,227,5306757,5677927,53324Subject to technical modification

BL-HP 1x55W T5c/TC-L HCArticle Number: 09 7634Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Different connection possibilities for various lamps• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsT5cTC-LW55WCombination ENEC certifiedRated input current (230V)TC-L 55 W 0,26 AT5c 55 W 0,26 ATC-LT5cAdditional Product HighlightsEN 60929 EN 61000-3-2ECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+50 °C1A20,98103 x 67 x 30 mmca. 150 gENEC, VDE, EMVTechnical Drawing10393,54,2110( )4,283.54,227,5306757,5www.hueco.com 25

TC-DDT5cBL-HP 1x60W T5c HCArticle Number: 09 7635Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL 1x28W TC-DD HMC MinipowerArticle Number: 09 5238Product Highlights• Alternative design to magenetic ballast• Digital ASIC technology• Output stabilization at 207-254V AC• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Safe operation under emergency conditions 176-276V DC• Power reduction under DC conditions• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Harmonic wave limit acc. to EN 61000-3-2• High spec components for a lifetime of 30.000h at tc max. /tamax.• Lifetime 60.000h at ta = 40°CAdditional Product HighlightsAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT5cLampTC-DDPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight60W220 - 240 V~0/50...60 Hz0,28 A176 - 276 V-20°C...+50 °C1A20,98103 x 67 x 30 mmca. 155 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight28W230 - 240 V~0/50...60 Hz0,24 A176 - 276 V-15°C...+50 °C1A2> 0,55c80 x 40 x 22 mmca. 50 gTest markENEC, VDE, EMVTest markVDE, ENEC, EMVTechnical DrawingTechnical Drawing10393,54,2807060,4110( )4,283.54,2704,227,5304,2226757,54026Subject to technical modification

BL-HP 1x28W TC-DD HCArticle Number: 09 7436Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 1x28W TC-DD HSArticle Number: 09 7426Product Highlights• Alternative design to magnetic ballast• Digital ASIC technology• Optimal lamp operating by HLC technology (HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2TC-DDAdditional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2 EN 60929 EN 61000-3-2ECGno dimTechnical DataTechnical DataLampTC-DDLampTC-DD T8*PowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight28W220 - 240 V~0/50...60 Hz0,12 A176 - 276 V-20°C...+60 °C1A20,97103 x 67 x 30ca. 120 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight26W 30W220 - 240 V~0/50...60 Hz0,12 A 0,13 A176 - 276 V-20°C...+60 °C1A20,97150 x 42 x 30 mmca. 125 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing10393,54,230110( )4,283.56757,527,5304,3424,2140150www.hueco.com 27

BL-HP 1x38W TC-DD HCTC-LTC-FTC-DDArticle Number: 09 7437Product Highlights• HÜCO compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsTC-DDTC-LTC-FW36WCombination approved38 WRated input current (230V)TC-DD 38 W 0,17 ATC-L 36 W 0,16 ATC-F 36 W 0,16 ACombination ENEC certifiedAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1A20,98103 x 67 x 30 mmca. 120 gENEC, VDETechnical Drawing10393,54,2110( )4,283.54,227,5306757,528Subject to technical modification

BL-HP 1x36-38W HSArticle Number: 09 7427Product Highlights• Alternative design to magnetic ballast• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsTC-DDTC-LTC-FT8W36WCombination approved38 WRated input current (230V)TC-DD 38 W 0,17 ATC-L 36 W 0,16 ATC-F 36 W 0,16 AT8 36W 0,15 ACombination ENEC certifiedTC-LTC-FTC-DDT8Additional Product HighlightsEN 60929 EN 61000-3-2ECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1A20,98150 x 42 x 30 mmca. 125 gENEC, VDETechnical Drawing304,342140150www.hueco.com 29

BL-HP 1x55W TC-DD HCArticle Number: 09 7438TC-DDProduct Highlights• HÜCO compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsECGno dimEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markTC-DD55W220 - 240 V~0/50...60 Hz0,25 A176 - 276 V-15°C...+50 °C1A20,95123 x 79 x 33 mmca. 190 gENEC, VDETechnical Drawing1231114,54,599(129,5)677927,53330Subject to technical modification

9BL-HP 1x55W TC-L MS2Article Number: 09 7039BL-HP 2x55W TC-L MS2Article Number: 09 7058Product Highlights• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II circuit (HÜCO Lamp Control): Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decrease self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for theballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) Shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedProduct Highlights• Construction height just 21 mm• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II circuit (HÜCO Lamp Control): Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decrease self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticLamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect• Automatic restart once the lamp has been changedTC-LAdditional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2 EN 60929 EN 61000-3-2ECGno dimTechnical DataTechnical DataLampTC-LLampTC-LPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight55W220 - 240 V~0/50...60 Hz0,27 A176 - 276 V-20°C...+55 °C1A20,98280 x 30 x 21 mmca. 215 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergieklassePower factorLength x Width x HeightWeight55W220-240 V~0/50...60 Hz0,51 A0 - 0 V-20 - +50 C°2A20.98360 x 30 x 21 mm285 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing2700,3350 ±0,34,2 304,2Ø4,2304,25,42700,34,236094,22802112,892112,89Ø4,2350 ±0,34,25,4www.hueco.com 31

TC-SELTC-DELTC-TELTC-DDT5BL-HP 1/2 x 9-21W HC TwingleArticle Number: 09 7543Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsReplaces 097533/53Approved lamp combinationsTC-SELTC-DELTC-TELTC-DDT5W2 TC-SEL T519W 14 WTC-SEL 9WT5 14WTC-TEL 13WTC-SEL 11WTC-DD 16WTC-DEL 10WTC-DD 10WCombination approved9W 10 W 11W 13W 14W 16W 21WTC-TEL13WTC-SEL11WTC-DD16WTC-DEL10WCombination ENEC certifiedTC-DD10WECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markEN 60929 EN 61000-3-2see tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1/2A2/A3ca. 0,9103 x 67 x 30 mmca. 135 gENEC, VDE, EMVRated input current (230V)TC-SEL 1x9 W 0,05 A TC-DEL 1x10 W 0,05 ATC-SEL 1x11 W 0,06 A TC-DEL/TEL 1x13 W 0,06 ATC-DD 1x10 W 0,06 A T5 1x14 W 0,07 ATC-DD 1x16 W 0,07 A T5 1x21 W 0,10 ARated input current for double (230V)TC-SEL 2x9 W 0,09 A TC-DEL 2x10 W 0,10 ATC-SEL 2x11 W 0,12 A TC-DEL/TEL 2x13 W 0,13 ATC-DD 2x10 W 0,10 A T5 2x14 W 0,13 ATC-DD 2x16 W 0,14 A T5 2x21 W 0,10 ATechnical Drawing10393,54,2110( )4,283.54,227,5306757,532Subject to technical modification

BL-HP 1/2 x 9-21W HS TwingleNew NeuTC-SELArticle Number: 09 5043Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Different lamps can be operated at the same time• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsReplaces 095033/53Approved lamp combinationsTC-SELTC-DELTC-TELTC-DDT5W2 TC-SEL T519W 14 WTC-SEL 9WT5 14WTC-TEL 13WTC-SEL 11WTC-DD 16WTC-DEL 10WTC-DD 10WCombination approved9W 10 W 11W 13W 14W 16W 21WTC-TEL13WTC-SEL11WTC-DD16WTC-DEL10WCombination ENEC certifiedTC-DD10WTC-DELTC-TELTC-DDT5Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markEN 60929 EN 61000-3-2see tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1/2A2/A3ca. 0,9150 x 42 x 30 mmca. 120 gENEC, VDERated input current (230V)TC-SEL 1x9 W 0,05 A TC-DEL 1x10 W 0,05 ATC-SEL 1x11 W 0,06 A TC-DEL/TEL 1x13 W 0,06 ATC-DD 1x10 W 0,06 A T5 1x14 W 0,07 ATC-DD 1x16 W 0,07 A T5 1x21 W 0,10 ARated input current for double (230V)TC-SEL 2x9 W 0,09 A TC-DEL 2x10 W 0,10 ATC-SEL 2x11 W 0,12 A TC-DEL/TEL 2x13 W 0,13 ATC-DD 2x10 W 0,10 A T5 2x14 W 0,13 ATC-DD 2x16 W 0,14 AECGno dimTechnical Drawing304,342140150www.hueco.com 33

BL-HP 1/2x18W TC-DEL/TEL HC TwingleBL-HP 1/2x18W TC-DEL/TEL HS TwingleNew NeuTC-DELTC-TELArticle Number: 09 7544Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Replaces 097554Article Number: 09 5044Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Different lamps can be operated at the same time• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Replaces 095034/44Additional Product HighlightsAdditional Product HighlightsECGno dimEN 60929 EN 61000-3-2 EN 60929 EN 61000-3-2Technical DataTechnical DataLampTC-DEL/TELLampTC-DEL/TELPowerRated voltageMains frequencyRated input current Single / DoubleD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight18W220 - 240 V~0/50...60 Hz0,<strong>08</strong> A / 0,17 A176 - 276 V-20°C...+60 °C1/2A2ca. 0,95103 x 67 x 30 mmca. 135 gPowerRated voltageMains frequencyRated input current Single / DoubleD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight18W220 - 240 V~0/50...60 Hz0,<strong>08</strong> A / 0,17 A176 - 276 V-20°C...+60 °C1/2A2ca. 0,95150 x 42 x 30 mmca. 120 gTest markENEC, VDE, EMVTest markENEC, VDETechnical DrawingTechnical Drawing10393,54,230110( )4,283.56757,527,5304,3424,214015034Subject to technical modification

BL-HP 1x15-42W/2x15-26W HC TwingleArticle Number: 09 7545Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markEN 60929 EN 61000-3-2see tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1/2A2ca. 0,95103 x 67 x 30 mmca. 135 gENEC, VDE, EMVApproved lamp combinationsTC-DELTC-TELTC-FTC-LT5cT5T8T12W2 T8 T8 T51 15W 18W 14WT8 15WT8 18WT5 14WT5c 22WTC-F 24WTC-L 24WTC-TEL 26WTC-L 18WTC-F 18WTC-DEL 26WCombination approvedRated input current (230V)15W 18W 22W 24W 26W 32W 36W 38W 39W 40W 42WT5c22W1xTC-DEL/TEL 26 W 0,12 A1xTC-TEL 32 W 0,16 A1xTC-TEL 42 W 0,21 A1xTC-L 40 W 0,19 A1xT8 15 W 0,<strong>08</strong> A1xT8 18 W 0,09 A1xT8 36 W 0,16 A1xT8 38 W 0,17 ATC-F24WTC-L TC-TEL TC-L TC-F TC-DEL24W 26W 18W 18W 26WCombination ENEC certified1xTC-L/F 18 W 0,<strong>08</strong> A1xTC-L/F 24 W 0,11 A1xT5c 22 W 0,11 A1xT5c 40 W 0,19 A1xT5 24 W 0,12 A1xT5 39 W 0,17 A1xT12 40 W 0,17 ATC-DELTC-TELTC-LTC-FT5cT5T8T12ECGno dimRated input current for double (230V)Technical Drawing2xTC-DEL/TEL 26 W 0,24 A2xT8 15 W 0,15 A2xT8 18 W 0,16 A2xTC-L/F 18 W 0,16 A2xTC-L/F 24 W 0,22 A2xT5c 22 W 0,22 A2xT5 24 W 0,24 A10393,54,26757,5110( )4,283.54,227,530www.hueco.com 35

BL-HP 1x15-42W/2x15-26W HS TwingleNewTC-DELTC-TELTC-LTC-FT5cT5T8T12ECGno dimArticle Number: 09 5045Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Different lamps can be operated at the same time• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markReplaces 095035/55EN 60929 EN 61000-3-2see tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+60 °C1/2A2ca. 0,95150 x 42 x 30 mmca. 120 gENEC, VDEApproved lamp combinationsTC-DELTC-TELTC-FTC-LT5cT5T8T12W2 T8 T8 T51 15W 18W 14WT8 15WT8 18WT5 14WT5c 22WTC-F 24WTC-L 24WTC-TEL 26WTC-L 18WTC-F 18WTC-DEL 26WCombination approvedRated input current (230V)15W 18W 22W 24W 26W 32W 36W 38W 39W 40W 42WT5c22W1xTC-DEL/TEL 26 W 0,12 A1xTC-TEL 32 W 0,16 A1xTC-TEL 42 W 0,21 A1xTC-L 40 W 0,19 A1xT8 15 W 0,<strong>08</strong> A1xT8 18 W 0,09 A1xT8 36 W 0,16 A1xT8 38 W 0,17 ATC-F24WRated input current for double (230V)TC-L TC-TEL TC-L TC-F TC-DEL24W 26W 18W 18W 26WCombination ENEC certified1xTC-L/F 18 W 0,<strong>08</strong> A1xTC-L/F 24 W 0,11 A1xT5c 22 W 0,11 A1xT5c 40 W 0,19 A1xT5 24 W 0,12 A1xT5 39 W 0,17 A1xT12 40 W 0,17 ATechnical Drawing2xTC-DEL/TEL 26 W 0,24 A2xT8 15 W 0,15 A2xT8 18 W 0,16 A2xTC-L/F 18 W 0,16 A2xTC-L/F 24 W 0,22 A2xT5c 22 W 0,22 A2xT5 24 W 0,24 A304,34214015036Subject to technical modification

BL-HP 1/2x26-42 W HCNewArticle Number: 09 7548Product Highlights• „Twingle“ Usable with 1 or 2 lamps• Different lamps can be operated at the same time• Compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsTC-DELTC-TELW26 W 32 W 42W2 TC-DEL TC-TEL126W 26WTC-DEL 26WTC-TEL 26WTC-TEL 32WTC-TEL 42WCombination approvedTC-TEL32WTC-TEL42 WCombination ENEC certifiedTC-DELTC-TELAdditional Product HighlightsReplaces 097558Rated input current (230V)TC-DEL 26 W 0,14 ATC-TEL 26 W 0,14 ATC-TEL 32 W 0,16 ATC-TEL 42 W 0,20 ATechnical DataEN 60929 EN 61000-3-2Rated input current for double (230V)TC-DEL 26 W 0,24 A TC-TEL 32 W 0,30 ATC-TEL 26 W 0,24 A TC-TEL 42 W 0,39 AECGno dimLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20 °C...+50 °C1/2A2> 0,95c123 x 79 x 33 mmca. 180 gVDE, ENECTechnical Drawing1231114,54,5996779(129,5)27,533www.hueco.com 37

BL-HP 2x18-40W HCTC-DELTC-TELTC-LTC-FT5cArticle Number: 09 7555Product Highlights• Different lamps can be operated at the same time• HÜCO compact housing• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinations21TC-DEL 26WTC-TEL 26WTC-TEL 32WT5c 22WT5c 40WTC-L 18WTC-L 24WTC-L 40WTC-F 18WTC-F 24WTC-DEL26WCombination approvedTC-TEL TC-TEL26W 32WT5c22WT5c40WTC-L18WTC-L24WTC-L40WCombination ENEC certifiedTC-F18WTC-F24WRated input current for double (230V)Additional Product Highlights2xTC-DEL/TEL 26 W 0,24 A2xTC-L/F 24 W 0,22 AECGno dimEN 60929 EN 61000-3-22xTC-DEL/TEL 32 W 0,32 A2xTC-L/F 18 W 0,16 A2xT5c 22 W 0,22 A2xT5c 22/40 W 0,31 ATechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+50 °C2A20,95123 x 79 x 33 mmca. 180 gENEC, VDE, EMVTechnical Drawing1231114,54,599(129,5)677927,53338Subject to technical modification

BL-HP 1x13W TC-DEL/TEL HC A-DIMArticle Number: 09 7574Product Highlights• Same housing as non-dimmable electronic ballast (103x67x30mm)• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 1x18W TC-DEL/TEL HC A-DIMArticle Number: 09 7575Product Highlights• Same housing as non-dimmable electronic ballast (103x67x30mm)• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2TC-DELTC-TELAdditional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataECG,1...10VLampTC-DEL/TELLampTC-DEL/TELPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight13W220 - 240 V~0/50...60 Hz0,07 A176 - 276 V+5°C...+60 °C1A10,971...10 V0,15 mA103 x 67 x 30 mmca. 145 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight18W220 - 240 V~0/50...60 Hz0,09 A176 - 276 V+5°C...+50 °C1A10,971...10 V0,15 mA103 x 67 x 30 mmca. 140 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing10393,54,210393,54,2110( )4,283.5110( )4,283.54,24,227,53027,5306757,56757,5www.hueco.com 39

BL-HP 1x26-42W TC-DEL/TEL HC A-DIMTC-DELTC-TELArticle Number: 09 7570Product Highlights• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Same housing as non-dimmable electronic ballast (103x67x30mm)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Different connection possibilities for various lamps• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsW26W 32W 42WTC-DELTC-TELTC-TELTC-TELCombination approved Combination ENEC certifiedRated input current (230V)TC-DEL 26 W 0,13 ATC-TEL 26 W 0,13 ATC-TEL 32 W 0,16 ATC-TEL 42 W 0,21 AAdditional Product HighlightsEN 60929 EN 61000-3-2ECG,1...10VTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C1A10,971...10 V0,15 mA103 x 67 x 30 mmca. 145 gENEC, VDETechnical Drawing10393,54,2110( )4,283.54,227,5306757,540Subject to technical modification

BL-HP 1x57/70W TC-TEL HC A-DIMArticle Number: 09 7571Product Highlights• Digital ASIC technology• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsW57W 70WTC-TELCombination approved Combination ENEC certifiedRated input current (230V)TC-TEL 57 W 0,27 ATC-TEL 70 W 0,32 ATC-TELAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest markTC-TEL57/70W220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA123 x 79 x 33 mmca. 235 gENEC, VDEECG,1...10VTechnical Drawing1231114,54,599(129,5)677927,533www.hueco.com 41

BL-HP 1x18-40W HC A-DIMTC-LTC-FT5cArticle Number: 09 7516Product Highlights• Digital ASIC technology• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsW18W 22W 24W 40WT5cTC-FTC-LCombination approved Combination ENEC certifiedRated input current (230V)T5c 22 W 0,11 AT5c 40 W 0,19 ATC-L/F 18 W 0,09 ATC-L/F 24 W 0,12 AAdditional Product HighlightsEN 60929 EN 61000-3-2ECG,1...10VTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA103 x 67 x 30 mmca. 145 gENEC, VDETechnical Drawing10393,54,2110( )4,283.54,227,5306757,542Subject to technical modification

BL-HP 1x55W T5c HC A-DIMArticle Number: 09 7674Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 1x60W T5c HC A-DIMArticle Number: 09 7675Product Highlights• Digital ASIC technology• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2T5cAdditional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataECG,1...10VLampT5cLampT5cPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight55W220 - 240 V~0/50...60 Hz0,26 A176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA123 x 79 x 33 mmca. 200 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight60W220 - 240 V~0/50...60 Hz0,28 A176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA123 x 79 x 33 mmca. 200 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing1231114,54,5991231114,54,599(129,5)(129,5)677927,533677927,533www.hueco.com 43

TC-DDBL-HP 1x28W TC-DD HC A-DIMArticle Number: 09 7475Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 1x38W TC-DD HC A-DIMArticle Number: 09 7477Product Highlights• Digital ASIC technology• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2ECG,1...10VTechnical DataTechnical DataLampTC-DDLampTC-DDPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight28W220 - 240 V~0/50...60 Hz0,13 A176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA103 x 67 x 30 mmca. 145 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight38W220 - 240 V~0/50...60 Hz0,17 A176 - 276 V+5°C...+50 °C1A10,981...10 V0,15 mA103 x 67 x 30 mmca. 145 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing10393,54,210393,54,2110( )4,283.5110( )4,283.54,24,227,53027,5306757,56757,544Subject to technical modification

9BL-HP 1x55W TC-L MS3 A-DIMNewBL-HP 2x13W TC-DEL/TEL HC A-DIMArticle Number: 09 7079Article Number: 09 7584Product HighlightsProduct Highlights• Flicker-free dimming from 100% to 1%• Active harmonic wave filter enables constant power output across a• Controlled via 1-10V signalwide input range• Construction height just 21 mm• Reduced power losses, decrease self-heating of the ballast• Digital ASIC Technology• Flicker-free ignition• Flicker-free during operation• No stroboscopic effects <strong>and</strong> flicker-free during operation• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast • No irritating noise• EOL (end of life) shut down of ballast at lamp end of life or defect • Automatic restart once the lamp has been changed• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring • Controlled via 1-10V signal• Reduced power losses, decreased self-heating of the ballast • Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2TC-DELTC-TELTC-LAdditional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataECG,1...10VLampTC-LLampTC-DEL/TELPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergieklassePower factorInterfaceInterface currentLength x Width x HeightWeight55W220-240 V~0/50...60 Hz0,27 A200 - 300 V+5°C...+50°C1A10.981...10V> 0.2 mA360 x 30 x 21 mm265 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight13W220 - 240 V~0/50...60 Hz0,13 A176 - 276 V+5°C...+50 °C2A10,981...10 V0,15 mA123 x 79 x 33 mmca. 200 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing30Ø4,2350 ±0,34,21231114,54,5993606779(129,5)27,5334,22112,89Ø4,2350 ±0,35,4www.hueco.com 45

TC-DELTC-TELBL-HP 2x18W TC-DEL/TEL HC A-DIMArticle Number: 09 7585Product Highlights• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 2x26W TC-TEL/DEL HC A-DIMArticle Number: 09 7586Product Highlights• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2 EN 60929 EN 61000-3-2ECG,1...10VTechnical DataTechnical DataLampTC-DEL/TELLampTC-DEL/TELPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight18W220 - 240 V~0/50...60 Hz0,17 A176 - 276 V+5°C...+50 °C2A10,971...10 V0,15 mA123 x 79 x 33 mmca. 220 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeight26W220 - 240 V~0/50...60 Hz0,24 A176 - 276 V+5°C...+50 °C2A10,971...10 V0,15 mA123 x 79 x 33 mmca. 225 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing1231114,54,5991231114,54,599(129,5)(129,5)677927,533677927,53346Subject to technical modification

BL-HP 2x26-42W TC-TEL/DEL HC A-DIMArticle Number: 09 7580Product Highlights• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Different connection possibilities for various lamps• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinations21TC-DEL 26WTC-TEL 26WTC-TEL 32WTC-TEL 42WTC-DEL26WTC-TEL26WCombination approvedTC-TEL32WRated input current (230V)2xTC-DEL 26 W 0,24 A2xTC-TEL 26 W 0,24 A2xTC-TEL 36 W 0,31 A2xTC-TEL 42 W 0,40 ATC-TEL42WCombination ENEC certifiedTC-DELTC-TELAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataECG,1...10VLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest markTC-DEL/TELsee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C2A10,981...10 V0,15 mA123 x 102 x 33 mmca. 260 gENEC, VDETechnical Drawing122,6110,54,5101,690(142.5)4,5994,532,827,3www.hueco.com 47

TC-LTC-FBL-HP 2x18/24W TC-L/F HC A-DIMArticle Number: 09 7526Product Highlights• Active harmonic wave filter enables constant power output across awide input range• Digital ASIC technology• Different connection possibilities for various lamps• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Different connection possibilities for various lamps• Flicker-free dimming from 100% to 3%• Controlled via 1-10V signal• Common dimming of electronic ballasts possible inspite of being splitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinations1TC-LTC-LTC-FTC-F218W24W18W24WTC-L18WTC-L24WCombination approvedTC-F18WRated input current (230V)2xTC-L 18 W 0,17 A2xTC-L 24 W 0,23 A2xTC-F 18 W 0,17 A2xTC-F 24 W 0,23 ATC-F24WCombination ENEC certifiedAdditional Product HighlightsEN 60929 EN 61000-3-2ECG,1...10VTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest markTC-L/F18/24W220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C2A10,981...10 V0,15 mA123 x 79 x 33 mmca. 225 gENEC, VDETechnical Drawing1231114,54,599(129,5)677927,53348Subject to technical modification

BL-HP 2x55W TC-L MS3 A-DIMNewBL-HP 1x18W TC-DEL/TEL HC D-DIMArticle Number: 09 7<strong>08</strong>9Product Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastArticle Number: 09 7875Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2TC-DELTC-TELTC-LAdditional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2 EN 60929 EN 61000-3-2Technical DataTechnical DataECG,1...10VLampTC-LLampTC-DEL/TELPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceInterface currentLength x Width x HeightWeightTest mark55W220 - 240 V~0/50...60 Hz0,54 A176 - 276 V+5°C...+50 °C2A10,971...10 V> 0,2 mA425 x 30 x 21 mmca. 350 gENEC, VDEPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceLength x Width x HeightWeightTest mark18W220 - 240 V~0/50...60 Hz0,09 A176 - 276 V+5°C...+50 °C1A10,97DALI123 x 79 x 33 mmca. 175 gENEC, VDETechnical DrawingTechnical Drawing415 ±0,330Ø4,24,21231114,54,5994256779(129,5)27,5332112,894,29Ø4,2415 ±0,35,4www.hueco.com 49

BL-HP 1x26-42W TC-DEL/TEL HC D-DIMTC-DELTC-TELArticle Number: 09 7870Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsW26W 32W 42WTC-DELTC-TELCombination approved Combination ENEC certifiedRated input current (230V)TC-DEL 26 W 0,13 ATC-TEL 26 W 0,13 ATC-TEL 32 W 0,16 ATC-TEL 42 W 0,21 AAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataECGDALILampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceLength x Width x HeightWeightTest markTC-DEL/TELsee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C1A10,97DALI123 x 79 x 33 mmca. 175 gENEC, VDETechnical Drawing1231114,54,599(129,5)677927,53350Subject to technical modification

BL-HP 1x18-40W HC D-DIMArticle Number: 09 7816Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinationsW18W 22W 24W 40WT5cTC-FTC-LCombination approved Combination ENEC certifiedRated input current (230V)T5c 22 W 0,11 AT5c 40 W 0,19 ATC-L/F 18 W 0,09 ATC-L/F 24 W 0,12 ATC-LTC-FT5cAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceLength x Width x HeightWeightsee tablesee table220 - 240 V~0/50...60 Hz0,09 A176 - 276 V+5°C...+50 °C1A10,98DALI123 x 79 x 33 mmca. 175 gECGDALITechnical Drawing1231114,54,599(129,5)677927,533www.hueco.com 51

TC-LT5cBL-HP 1x55W T5c/TC-L HC D-DIMArticle Number: 09 7864Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2BL-HP 1x60W T5c HC D-DIMArticle Number: 09 7865Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition,• No stroboscopic effects <strong>and</strong> flicker-free during operation• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Additional Product HighlightsAdditional Product HighlightsEN 60929 EN 61000-3-2 EN 60929 EN 61000-3-2Technical DataTechnical DataECGDALILampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsPower factorEnergy classificationInterfaceLength x Width x HeightWeightTest markT5c, TC-L55W220 - 240 V~0/50...60 Hz0,26 A176 - 276 V+5°C...+50 °C10,98A1DALI123 x 79 x 33 mmca. 200 gENEC, VDELampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsPower factorEnergy classificationInterfaceLength x Width x HeightWeightTest markT5c60W220 - 240 V~0/50...60 Hz0,28 A176 - 276 V+5°C...+50 °C10,98A1DALI123 x 79 x 33 mmca. 200 gENEC, VDETechnical DrawingTechnical Drawing1231114,54,5991231114,54,599(129,5)(129,5)677927,533677927,53352Subject to technical modification

BL-HP 2x18W TC-DEL/TEL HC D-DIMArticle Number: 09 7885Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2TC-DELTC-TELAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceLength x Width x HeightWeightTest markTC-DEL/TEL18W220 - 240 V~0/50...60 Hz0,17 A176 - 276 V+5°C...+50 °C2A10,98DALI123 x 102 x 33 mmca. 245 gENEC, VDEECGDALITechnical Drawing122,6110,54,5101,690(142.5)4,5994,532,827,3www.hueco.com 53

BL-HP 2x26-42W TC-DEL/TEL HC D-DIMTC-DELTC-TELArticle Number: 09 7880Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition, no irritating noise• No stroboscopic effects <strong>and</strong>flicker-free during operation• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinations21TC-DEL 26WTC-TEL 26WTC-TEL 32WTC-TEL 42WTC-DEL26WTC-TEL26WCombination approvedTC-TEL32WRated input current (230V)2xTC-DEL 26 W 0,24 A2xTC-TEL 26 W 0,24 A2xTC-TEL 32 W 0,32 A2xTC-TEL 42 W 0,40 ATC-TEL42WCombination ENEC certifiedAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataECGDALILampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceLength x Width x HeightWeightTest markTC-DEL/TELsee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C2A10,98DALI123 x 102 x 33 mmca. 255 gENEC, VDETechnical Drawing122,6110,54,5101,690(142.5)4,5994,532,827,354Subject to technical modification

BL-HP 2x18/24W TC-L/F HC D-DIMArticle Number: 09 7826Product Highlights• DALI Interface with extended over voltage protection• Microprocessor controlled• Different connection possibilities for various lamps• Optimal lamp operating by HLC technology(HÜCO Lamp Control)• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Automatic restart once the lamp has been changed• Flicker-free dimming from 100% to 3%• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuits• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Harmonic wave limit acc. to EN 61000-3-2Approved lamp combinations1TC-LTC-LTC-FTC-F218W24W18W24WTC-L18WTC-L24WCombination approvedTC-F18WRated input current (230V)2xTC-L 18 W 0,17 A2xTC-L 24 W 0,23 A2xTC-F 18 W 0,17 A2xTC-F 24 W 0,23 ATC-F24WCombination ENEC certifiedTC-LTC-FAdditional Product HighlightsEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorInterfaceLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V+5°C...+50 °C2A10,98DALI123 x 102 x 33 mmca. 245 gENEC, VDEECGDALITechnical Drawing122,6110,54,5101,690(142.5)4,5994,532,827,3www.hueco.com 55

BL-HP 1x14-35W T5 MS2TC-LT5Article Number: 09 7204Product Highlights• Multi power function for T5 <strong>and</strong> TC-L lamps• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticLamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect.• Automatic restart once the lamp has been changedApproved lamp combinationsW14W 21W 28W 35WT5Combination approved Combination ENEC certifiedRated input current (230V)T5 14 W 0,<strong>08</strong> AT5 21 W 0,10 AT5 28 W 0,14 AT5 35 W 0,17 AAdditional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2T5 ECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT5see table220 - 240 V~0/50...60 Hz176-276 V-20°C...+55 °C1A20,95c280 x 30 x 21 mmca. 200 gENEC, VDETechnical Drawing2700,34,2 304,25,42700,34,294,22802112,8956Subject to technical modification

BL-HP 1x24-40W T5/TC-F/L MS2Article Number: 09 7206Product Highlights• Multi power function for T5 <strong>and</strong> TC-L lamps• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic Lamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect.• Automatic restart once the lamp has been changedApproved lamp combinationsW24W 36W 39W 40WT5TC-LTC-FCombination approved Combination ENEC certifiedRated input current (230V)T5 24 W 0,17 AT5 39 W 0,19 ATC-L/F 36 W 0,15 ATC-L/F 40 W 0,19 ATC-LT5Additional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT5see table220 - 240 V~0/50...60 Hz176-276 V-20°C...+55 °C1A20,98c280 x 30 x 21 mmca. 200 gENEC, VDET5 ECGno dimTechnical Drawing2700,34,2 304,25,42700,34,294,22802112,89www.hueco.com 57

BL-HP 1x49W T5 MS2Article Number: 09 7207BL-HP 1x54W T5 MS2Article Number: 09 72<strong>08</strong>TC-LT5Product Highlights• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic Lamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect.• Automatic restart once the lamp has been changedProduct Highlights• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect• Automatic restart once the lamp has been changedAdditional Product HighlightsAdditional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2HVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2Technical DataTechnical DataLampT5LampT5T5 ECGno dimPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLänge x Breite x HeightWeight49W220 - 240 V~0/50...60 Hz0,24 A176 - 276 V-20°C...+55 °C1A20,98c280 x 30 x 21 mmca. 200 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight54W220 - 240 V~0/50...60 Hz0,26 A176 - 276 V-20°C...+55 °C1A20,98c280 x 30 x 21 mmca. 215 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing2700,32700,34,2 304,25,42700,34,20,394,24,2 304,25,42704,22112,8994,22112,8928028058Subject to technical modification

BL-HP 1x55/80W T5/TC-L MS2Article Number: 09 7209Product Highlights• Multi power function for T5 <strong>and</strong> TC-L lamps• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticLamp wiring• EOL ( end of life ) Shut down of ballast at lamp end ofLife or defect.• Automatic restart once the lamp has been changedApproved lamp combinationsW80W 55WT5TC-LCombination approved Combination ENEC certifiedRated input current (230V)T5 80 W 0,38 ATC-L/F 55 W 0,27 ATC-L/F 80 W 0,38 ATC-LT5Additional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+55 °C1A20,98c280 x 30 x 21 mmca. 215 gENEC, VDET5 ECGno dimTechnical Drawing2700,34,2 304,25,42700,34,294,22802112,89www.hueco.com 59

9BL-HP 2x14-35W T5 MS2T5Article Number: 09 7214Product Highlights• 100% Light independent from mains voltage fluctuations• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticlamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect• Automatic restart once the lamp has been changedApproved lamp combinations1T5T5T5T5214W21W28W35WT514WCombination approvedT521WRated input current (230V)2xT5 14 W 0,15 A2xT5 21 W 0,21 A2xT5 28 W 0,28 A2xT5 35 W 0,34 AT528WT535WCombination ENEC certifiedAdditional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2T5 ECGno dimTechnical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT5see table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+55 °C2A20,95c360 x 30 x 21 mmca. 270 gENEC, VDETechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,460Subject to technical modification

9BL-HP EVG-HP 2x24-40W T5/TC-F/L MS2Article Number: 09 7216Product Highlights• Multi power function for T5 <strong>and</strong> TC-L lamps• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticLamp wiring• EOL ( end of life ) Shut down of ballast at lamp end ofLife or defect.• Automatic restart once the lamp has been changedAdditional Product HighlightsApproved lamp combinations2 T5 T5124W 39WT5 24WT5 39WTC-L 36WTC-L 40WTC-F 36WTC-F 40WCombination approvedRated input current (230V)2xT5 24 W 0,23 A2xT5 39 W 0,34 A2xTC-L/F 36 W 0,30 A2xTC-L/F 40 W 0,38 ATC-L36WTC-L40WTC-F36WCombination ENEC certifiedTC-F40WTC-LTC-FT5HVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176 - 276 V-20°C...+55 °C2A20,98c360 x 30 x 21 mmca. 270 gENEC, VDET5 ECGno dimTechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,4www.hueco.com 61

99BL-HP 2x49W T5 MS2Article Number: 09 7217BL-HP 2x54W T5 MS2Article Number: 09 7218T5Product Highlights• 100% Light independent from mains voltage fluctuations• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticLamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect• Automatic restart once the lamp has been changedProduct Highlights• 100% Light independent from mains voltage fluctuations• Fast <strong>and</strong> smooth lamp warm start within 1 second• HLC II Schaltung (HÜCO lamp control), Preheat of the cathodes <strong>and</strong>the operation of the lamp circuit run independently from each other,thereby ensuring very little impact from lamp tolerances <strong>and</strong> a verylow power loss• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50.000 h at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protectionFor the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automaticLamp wiring• EOL (end of life) Shut down of ballast at lamp end ofLife or defect• Automatic restart once the lamp has been changedAdditional Product HighlightsAdditional Product HighlightsHVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2HVPHLC IILAMP CONTROL EN 60929 EN 61000-3-2Technical DataTechnical DataLampT5LampT5T5 ECGno dimPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight49W220 - 240 V~0/50...60 Hz0,47 A176 - 276 V-20°C...+55 °C2A20,98c360 x 30 x 21 mmca. 285 gPowerRated voltageMains frequencyRated input currentD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeight54W220 - 240 V~0/50...60 Hz0,50 A176 - 276 V-20°C...+50 °C2A20,98c360 x 30 x 21 mmca. 285 gTest markENEC, VDETest markENEC, VDETechnical DrawingTechnical Drawing350 ±0,3350 ±0,3Ø4,24,2303603604,24,22112,892112,89Ø4,24,230Ø4,2350 ±0,35,4Ø4,2350 ±0,35,462Subject to technical modification

BL-HP 3/4x14W T5 MS3NewArticle Number: 09 7381Product HighlightsWiring scheme 3-lamps• Construction height just 21 mm• Alternative fixing via side-installation• Very flat connection clamps permit easy installation in flat lamps• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• Flicker-free ignition• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Very good Energy classification (EEI)• Also usable for 3 lamps• Harmonic wave limit acc. to EN 61000-3-210987123456T5Replaces 097262Wiring scheme 4-lampsAdditional Product Highlights1HVPHLC IILAMP CONTROL EN 60929 EN 61000-3-223Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT514W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C3/4A20,96c280 x 39 x 21 mmca. 240 gENEC, VDE10987456T5 ECGno dimTechnical Drawing2700,34,2 394,25,42700,34,294,22802112,89www.hueco.com 63

9BL-HP 1x14-35W T5 MS3 A-DIMNewT5Article Number: 09 7244Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinationsW14W 21W 28W 35WT5T5T5T5Combination approved Combination ENEC certifiedRated input current (230V)1xT5 14 W 0,<strong>08</strong> A1xT5 21 W 0,12 A1xT5 28 W 0,15 A1xT5 35 W 0,19 AAdditional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataT5 ECG1...10VLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,96 c360 x 30 x 21 mmca. 255 gENEC, VDETechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,464Subject to technical modification

9BL-HP 1x24/39W T5 MS3 A-DIMNewArticle Number: 09 7246Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinationsW24W 39WT5T5Combination approved Combination ENEC certifiedRated input current (230V)1xT5 24 W 0,12 A1xT5 39 W 0,17 AT5Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,98 c360 x 30 x 21 mmca. 255 gENEC, VDET5 ECG1...10VTechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,4www.hueco.com 65

99BL-HP 1x49W T5 MS3 A-DIMNewBL-HP 1x54W T5 MS3 A-DIMNewArticle Number: 09 7247 Article Number: 09 7248T5Product Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastProduct Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastAdditional Product HighlightsAdditional Product HighlightsHVPHVPEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT5LampT5T5 ECG1...10VPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark49W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,96 c360 x 30 x 21 mmca. 255 gENEC, VDEPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark54W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,95 c360 x 30 x 21 mmca. 265 gENEC, VDETechnical DrawingTechnical Drawing350 ±0,3350 ±0,3Ø4,24,2303603604,24,22112,892112,89Ø4,24,230Ø4,2350 ±0,35,4Ø4,2350 ±0,35,466Subject to technical modification

9BL-HP 1x80W T5/TC-L MS3 A-DIMNewArticle Number: 09 7249Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinationsW80W 80WT5TC-LCombination approved Combination ENEC certifiedRated input current (230V)1xT5 80 W 0,37 A1xTC-L 80 W 0,37 ATC-LT5Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,95 c360 x 30 x 21 mmca. 300 gENEC, VDET5 ECG1...10VTechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,4www.hueco.com 67

BL-HP 2x14-35W T5 MS3 A-DIMNewT5Article Number: 09 7294Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinations21T5 14WT5 21WT5 28WT5 35WT514W2xT5 14 W 0,15 A2xT5 21 W 0,21 A2xT5 28 W 0,28 A2xT5 35 W 0,35 AT521WCombination approvedRated input current (230V)T528WT535WCombination ENEC certifiedAdditional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataT5 ECG1...10VLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 320 gENEC, VDETechnical Drawing415 ±0,330Ø4,24,24252112,894,29Ø4,2415 ±0,35,468Subject to technical modification

BL-HP 2x24/39W T5 MS3 A-DIMNewArticle Number: 09 7296Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinations224W 39W1T5T5Combination approved Combination ENEC certifiedRated input current (230V)2xT5 24 W 0,23 A2xT5 39 W 0,34 AT5Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT524W, 39W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 320 gENEC, VDET5 ECG1...10VTechnical Drawing415 ±0,3Ø4,2304,24252112,894,29Ø4,2415 ±0,35,4www.hueco.com 69

BL-HP 2x49W T5 MS3 A-DIMNewBL-HP 2x54W T5 MS3 A-DIMNewArticle Number: 09 7297 Article Number: 09 7298T5Product Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastProduct Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastAdditional Product HighlightsAdditional Product HighlightsHVPHVPEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT5LampT5T5 ECG1...10VPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark49W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 350 gENEC, VDEPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark54W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 350 gENEC, VDETechnical DrawingTechnical Drawing415 ±0,3415 ±0,3Ø4,2304,24254254,24,22112,8992112,899Ø4,2304,2Ø4,2415 ±0,35,4Ø4,2415 ±0,35,470Subject to technical modification

Ballasts for T5 SWITCH CONTROLBallasts for TC-L SWITCH CONTROLProduct Highlights• Dimmable with push button (SWITCH CONTROL)• Flicker-free dimming from 100% to 1%• Construction height just 21 mm• Alternative fixing via side-installation• Very flat connection clamps permit easy installation in flat lamps• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuitsTechnical drawing for 1x ballasts4,5350360Technical drawing for 2x/4x ballasts4,54,54,54,5302121304,5420TC-LT5420430Additional Product HighlightsEN 60929 EN 61000-3-2Technical DataPower [W]Art. Nr.Number oflampsRated voltage[V~]Mainsfrequency[Hz]Rated current[A]D.C. voltagerange [V]14 09 7373 2 220...240 0/50...60 0,14 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36521 09 7374 2 220...240 0/50...60 0,21 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36524 09 7377 2 220...240 0/50...60 0,22 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 365Technical 28 09 Drawing 7375 2 220...240 0/50...60 0,27 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36535 09 7376 2 220...240 0/50...60 0,34 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36539 09 7378 2 220...240 0/50...60 0,38 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36549 09 7379 2 220...240 0/50...60 0,48 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36554 09 7380 2 220...240 0/50...60 0,51 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36514 09 7361 4 220...240 0/50...60 0,29 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 365Ballasts for TC-L36 09 7177 1 220...240 0/50...60 0,16 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28540 09 7368 1 220...240 0/50...60 0,18 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28555 09 7078 1 220...240 0/50...60 0,28 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28536 09 7187 2 220...240 0/50...60 0,30 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36540 09 7378 2 220...240 0/50...60 0,26 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36555 09 7<strong>08</strong>8 2 220...240 0/50...60 0,54 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 365Ambient temperature[°C]14 09 7363 1 220...240 0/50...60 0,<strong>08</strong> 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28521 09 7364 1 220...240 0/50...60 0,11 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28524 09 7367 1 220...240 0/50...60 0,16 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28528 09 7365 1 220...240 0/50...60 0,16 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28535 09 7366 1 220...240 0/50...60 0,18 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28539 09 7368 1 220...240 0/50...60 0,19 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28549 09 7369 1 220...240 0/50...60 0,24 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28554 09 7370 1 220...240 0/50...60 0,27 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28580 09 7371 1 220...240 0/50...60 0,38 176...276 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 285Energy classification(EEI)Power factorInterfaceInterface currenttyp. [mA]Length x Widthx Height [mm]Weight[g]T5 ECG1...10Vwww.hueco.com 71

BL-HP 1x18 T8 MS3Article Number: 09 7113BL-HP 1x36W T8 MS3Article Number: 09 7114T8Product Highlights• Very compact housing: height only 21 mm, length only 280 mm• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decreased self-heating of the ballast• Flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Fast <strong>and</strong> smooth lamp warm start within 1 second• Alternative fixing via side-installation.• 100 % light independent from mains voltage fluctuations• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedProduct Highlights• Very compact housing: height only 21 mm, length only 280 mm• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decreased self-heating of the ballast• Flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Fast <strong>and</strong> smooth lamp warm start within 1 second• Alternative fixing via side-installation.• 100 % light independent from mains voltage fluctuations• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedAdditional Product HighlightsAdditional Product HighlightsHVPHVPEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT8LampT8PowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark18W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C1A2≥ 0,96 c280 x 30 x 21 mmca. 200 gENEC, VDEPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark36W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C1A2≥ 0,98 c280 x 30 x 21 mmca. 200 gENEC, VDET8 ECGno dimTechnical DrawingTechnical Drawing2700,32700,34,2 304,25,42700,34,20,394,24,2 304,25,42704,22112,8994,22112,8928028072Subject to technical modification

BL-HP 1x58W T8 MS3BL-HP 2x18W T8 MS3Article Number: 09 7115 Article Number: 09 7123Product Highlights• Very compact housing: height only 21 mm, length only 280 mm• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decreased self-heating of the ballast• Flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Fast <strong>and</strong> smooth lamp warm start within 1 second• Alternative fixing via side-installation.• 100 % light independent from mains voltage fluctuations• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedProduct Highlights• Very compact housing: height only 21 mm, length only 280 mm• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decreased self-heating of the ballast• Flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Fast <strong>and</strong> smooth lamp warm start within 1 second• Alternative fixing via side-installation.• 100 % light independent from mains voltage fluctuations• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedT8Additional Product HighlightsAdditional Product HighlightsHVPHVPEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT8LampT8PowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark58W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C1A2≥ 0,98 c280 x 30 x 21 mmca. 200 gENEC, VDEPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark18W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C2A2≥ 0,97 c280 x 30 x 21 mmca. 200 gENEC, VDET8 ECGno dimTechnical DrawingTechnical Drawing2700,32700,34,2 304,25,42700,34,20,394,24,2 304,25,42704,22112,8994,22112,89280280www.hueco.com 73

BL-HP 2x36W T8 MS3BL-HP 2x58W T8 MS3Article Number: 09 7124 Article Number: 09 7125T8Product Highlights• Very compact housing: height only 21 mm, length only 280 mm• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decreased self-heating of the ballast• Flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Fast <strong>and</strong> smooth lamp warm start within 1 second• Alternative fixing via side-installation.• 100 % light independent from mains voltage fluctuations• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedProduct Highlights• Very compact housing: height only 21 mm, length only 280 mm• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decreased self-heating of the ballast• Flicker-free during operation• No irritating noise• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Fast <strong>and</strong> smooth lamp warm start within 1 second• Alternative fixing via side-installation.• 100 % light independent from mains voltage fluctuations• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changedAdditional Product HighlightsAdditional Product HighlightsHVPHVPEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT8LampT8PowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark36W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C2A2≥ 0,97 c280 x 30 x 21 mmca. 200 gENEC, VDEPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark58W220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C2A2≥ 0,98 c280 x 30 x 21 mmca. 200 gENEC, VDET8 ECGno dimTechnical DrawingTechnical Drawing2700,32700,34,2 304,25,42700,34,20,394,24,2 304,25,42704,22112,8994,22112,8928028074Subject to technical modification

BL-HP 3/4x15-24W MS3NewArticle Number: 09 7161Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Very compact housing: height only 21 mm, length only 280 mm• Lamp warm start <strong>and</strong> operation acc. to EN 60929• Optimal lamp operating by HLC technology (HÜCO Lamp Control)• Reduced power losses, decreased self-heating of the ballast• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for theballast• Suitable for emergency light fittings in accordance with VDE 01<strong>08</strong>• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• EOL (end of life) shut down of ballast at lamp end of life or defectApproved lamp combinationsW 15W 18W 24WT5 3xT8 3xTC-L/F 3xT8 4xTC-L/F 4xRated input current (230V)3xT5 24 W 0,33 A 4xT8 15 W 0,28 A3xT8 15 W 0,21 A 4xT8 18 W 0,31 A3xT8 18 W 0,25 A 4xTC-L/F 18 W 0,29 A3xTC-L/F 18 W 0,23 A3xTC-L/F 24 W 0,32 ATC-LTC-FT5T8Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V-20°C...+55 °C3/4A2≥ 0,95 c280 x 39 x 21 mmca. 240 gENEC, VDET8 ECGno dimTechnical Drawing2700,34,2 394,25,42700,34,294,22802112,89www.hueco.com 75

9BL-HP 1x18W T8 MS3 A-DIMNewArticle Number: 09 7143Product Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastT8Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT818W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,96 c360 x 30 x 21 mmca. 255 gENEC, VDET8 ECG1...10VTechnical Drawing350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,476Subject to technical modification

9BL-HP 1x36W T8 MS3 A-DIMNewArticle Number: 09 7144Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinationsW36W 36W 40WT8TC-L/FTC-LCombination approved Combination ENEC certifiedRated input current (230V)1xT8 36 W 0,16 A1xTC-L/F 36 W 0,16 A1xTC-L 40 W 0,21 ATC-LTC-FT8Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,98 c360 x 30 x 21 mmca. 255 gENEC, VDETechnical DrawingT8 ECG1...10V350 ±0,3Ø4,24,2303604,22112,89Ø4,2350 ±0,35,4www.hueco.com 77

9BL-HP 1x58W T8 MS3 A-DIMNewBL-HP 2x18W T8 MS3 A-DIMNewArticle Number: 09 7145 Article Number: 09 7193Product Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastProduct Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastT8Additional Product HighlightsAdditional Product HighlightsHVPHVPEN 60929 EN 61000-3-2EN 60929 EN 61000-3-2Technical DataTechnical DataLampT8LampT8PowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark58W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C1A1≥ 0,95 c360 x 30 x 21 mmca. 265 gENEC, VDEPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest mark18W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 320 gENEC, VDET8 ECG1...10VTechnical DrawingTechnical Drawing350 ±0,3415 ±0,3Ø4,24,2Ø4,2304,2303604252112,89Ø4,2350 ±0,34,25,42112,89Ø4,2415 ±0,34,25,4978Subject to technical modification

BL-HP 2x36W T8 MS3 A-DIMNewArticle Number: 09 7194Product Highlights• Multipower technology, one ballast for several lamps <strong>and</strong>/or performances• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastApproved lamp combinations21T8 36WTC-L/F 36WTC-L 40WT836WCombination approvedTC-L/F36WRated input current (230V)2xT8 36 W 0,31 A2xTC-L/F 36 W 0,31 A2xTC-L 40 W 0,38 ATC-L40WCombination ENEC certifiedTC-LTC-FT8Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest marksee tablesee table220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 320 gENEC, VDETechnical DrawingT8 ECG1...10V415 ±0,330Ø4,24,24252112,894,29Ø4,2415 ±0,35,4www.hueco.com 79

BL-HP 2x58W T8 MS3 A-DIMNewArticle Number: 09 7195Product Highlights• Flicker-free dimming from 100% to 1%• Controlled via 1-10V signal• Construction height just 21 mm• Digital ASIC Technology• Flicker-free during operation• Lifetime > 50,000 hours at tc max / ta max• HVP (HÜCO Voltage Protection) high overvoltage protection for the ballast• EOL (end of life) shut down of ballast at lamp end of life or defect• Automatic restart once the lamp has been changed• Universal terminal blocks for manual <strong>and</strong> automatic lamp wiring• Reduced power losses, decreased self-heating of the ballastT8Additional Product HighlightsHVPEN 60929 EN 61000-3-2Technical DataLampPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsEnergy classificationPower factorLength x Width x HeightWeightTest markT858W220 - 240 V~0/50...60 Hz176...276 V+5°C...+50 °C2A1≥ 0,97 c425 x 30 x 21 mmca. 325 gENEC, VDET8 ECG1...10VTechnical Drawing415 ±0,3Ø4,2304,24252112,894,29Ø4,2415 ±0,35,480Subject to technical modification

EVG for T8 SWITCH CONTROLProduct Highlights• Dimmable with push button (SWITCH CONTROL)• Flicker-free dimming from 100% to 1%• Construction height just 21 mm• Alternative fixing via side-installation• Very flat connection clamps permit easy installation in flat lamps• Active harmonic wave filter enables constant power output across awide input range• Reduced power losses, decrease self-heating of the ballast• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Common dimming of electronic ballasts possible in spite of beingsplitted into different circuitsTechnical drawing for 1x ballasts4,54,54,5350360Technical drawing for 2x/4x ballasts4204,54,54,530213021TC-LT8T8(T26)420430Additional Product HighlightsEN 60929 EN 61000-3-2Technical DataPower [W]Art. Nr.Number oflampsRated voltage[V~]Mainsfrequency[Hz]D.C. voltagerange[V]Ambient temperature[°C]Energy classification(EEI)Power factorInterfaceInterface currenttyp. [mA]Length x Widthx Height[mm]18 09 7176 1 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28536* 09 7177 1 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28558 09 7178 1 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 360 x 30 x 21 ca. 28518 09 7186 2 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36536** 09 7187 2 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36558 09 7188 2 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 36518 09 7172 4 220...240 0/50...60 200...300 +10...+50 A1 0,98 Switch Ctrl. 0,8 430 x 30 x 21 ca. 365Weight[g]*Approved lamp combinations**Approved lamp combinationsWTechnical Drawing 36WT8TC-L/F1T8TC-L/F236W36WT836WTC-L/F36WT8 ECG1...10VENEC approvedENEC approvedwww.hueco.com 81

TC-SELBL 4-10W 12VTC-DELArticle Number: 09 6217Product Highlights• For 12V applications (11.5 - 14.5V)• Compact housing• Geringes Weight• No stroboscopic effects <strong>and</strong> flicker-free during operation• No irritating noise• Different connection possibilities for various lamps• Lamp warm startApproved lamp combinationsW4W 6W 7W 8W 9W 10WT5TC-SELTC-DELCombination approved Combination ENEC certifiedRated input current (230V)T5T5 4 W 0,44 AT5 6 W 0,63 AT5 8 W 0,78 ATC-SEL 7 W 0,68 ATC-SEL 9 W 0,82 ATC-DEL 10 W 0,89 AAdditional Product HighlightsECGno dimTechnical DataLampPowerMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x HeightWeightsee tablesee tableDC10,5 - 14,5 V-10°C...+50 °C1182 x 40 x 29 mmca. 65 gTechnical Drawing4,56.3x0.8 (2x)298282Subject to technical modification

BL-HP 1x35W HID HC3NewBL-HP 1x70W HID HC3NewArticle Number: 09 5613Article Number: 09 5617Product Highlights• ECG for high intensity discharge lamps (HID)• Lifetime min. 50.000 houres at Tc max.• Lamp lifetime 10.000 houres• Steady lamp performances by mains fluctuations <strong>and</strong> lamp tolerances• Preservation of the colour lamp temperature• Short-circuit protection on the secondary side• Over-temperature protection• Independent housing with strain relief• The ECG is suitable for loop wiring• Also available as pre converted version (see 095623 <strong>and</strong> 095624)• Restart after cut-off time of 20 minutesProduct Highlights• ECG for high intensity discharge lamps (HID)• Lifetime min. 50.000 houres at Tc max.• Lamp lifetime 10.000 houres• Steady lamp performances by mains fluctuations <strong>and</strong> lamp tolerances• Preservation of the colour lamp temperature• Short-circuit protection on the secondary side• Over-temperature protection• Independent housing with strain relief• The ECG is suitable for loop wiring• Also available as pre converted version (see 095623 <strong>and</strong> 095624)• Restart after cut-off time of 20 minuteHIDAdditional Product HighlightsAdditional Product HighlightsECGno dimTechnical DataTechnical DataLampHIDLampHIDPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x Height35 W220 - 240 V~50/60 Hz176 - 276 V-20 °C...+60 °C1> 0,97c139,8 x 87,2 x 39 mmPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x Height70 W220 - 240 V~50/60 Hz176 - 276 V-20 °C...+60 °C1> 0,97c139,8 x 87,2 x 39 mmTechnical DrawingTechnical Drawing www.hueco.com 83

BL-HP 1x35W HID HC3 C2NewBL-HP 1x35W HID HC3 C1NewArticle Number: 09 5623 Article Number: 09 5624Product Highlights• ECG for high intensity discharge lamps (HID)• Pre converted version with 1x cable <strong>and</strong> plug for lamp• Pre converted version with 1x cable <strong>and</strong> plug for mains• Lifetime min. 50.000 houres at Tc max.• Lamp lifetime 10.000 houres• Steady lamp performances by mains fluctuations <strong>and</strong> lamp tolerances• Preservation of the colour lamp temperature• Short-circuit protection on the secondary side• Over-temperature protection• Independent housing with strain relief• The ECG is suitable for loop wiring• Also available as pre converted version (see 095623 <strong>and</strong> 095624)• Restart after cut-off time of 20 minutesProduct Highlights• ECG for high intensity discharge lamps (HID)• Pre converted version with 1x cable <strong>and</strong> plug for lamps• Lifetime min. 50.000 houres at Tc max.• Lamp lifetime 10.000 houres• Steady lamp performances by mains fluctuations <strong>and</strong> lamp tolerances• Preservation of the colour lamp temperature• Short-circuit protection on the secondary side• Over-temperature protection• Independent housing with strain relief• The ECG is suitable for loop wiring• Also available as pre converted version (see 095623 <strong>and</strong> 095624)• Restart after cut-off time of 20 minuteHIDAdditional Product HighlightsAdditional Product HighlightsECGno dimTechnical DataTechnical DataLampHIDLampHIDPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x Height35 W220 - 240 V~50/60 Hz176 - 276 V-20 °C...+60 °C1> 0,97c139,8 x 87,2 x 39 mmPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x Height35 W220 - 240 V~50/60 Hz176 - 276 V-20 °C...+60 °C1> 0,97c139,8 x 87,2 x 39 mmTechnical DrawingTechnical Drawing 84Subject to technical modification

BL-HP 1x70W HID HC3 C2NewBL-HP 1x70W HID HC3 C1NewArticle Number: 09 5627 Article Number: 09 5628Product Highlights• ECG for high intensity discharge lamps (HID)• Pre converted version with 1x cable <strong>and</strong> plug for lamp• Pre converted version with 1x cable <strong>and</strong> plug for mains• Lifetime min. 50.000 houres at Tc max.• Lamp lifetime 10.000 houres• Steady lamp performances by mains fluctuations <strong>and</strong> lamp tolerances• Preservation of the colour lamp temperature• Short-circuit protection on the secondary side• Over-temperature protection• Independent housing with strain relief• The ECG is suitable for loop wiring• Also available as pre converted version (see 095623 <strong>and</strong> 095624)• Restart after cut-off time of 20 minutesProduct Highlights• ECG for high intensity discharge lamps (HID)• Pre converted version with 1x cable <strong>and</strong> plug for lamp• Lifetime min. 50.000 houres at Tc max.• Lamp lifetime 10.000 houres• Steady lamp performances by mains fluctuations <strong>and</strong> lamp tolerances• Preservation of the colour lamp temperature• Short-circuit protection on the secondary side• Over-temperature protection• Independent housing with strain relief• The ECG is suitable for loop wiring• Also available as pre converted version (see 095623 <strong>and</strong> 095624)• Restart after cut-off time of 20 minuteHIDAdditional Product HighlightsAdditional Product HighlightsECGno dimTechnical DataTechnical DataLampHIDLampHIDPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x Height70 W220 - 240 V~50/60 Hz176 - 276 V-20 °C...+60 °C1> 0,97c139,8 x 87,2 x 39 mmPowerRated voltageMains frequencyD.C. voltage rangeAmbient temperatureNumber of lampsPower factorLength x Width x Height70 W220 - 240 V~50/60 Hz176 - 276 V-20 °C...+60 °C1> 0,97c139,8 x 87,2 x 39 mmTechnical DrawingTechnical Drawing www.hueco.com 85

ET 20-70VA LEArticle Number: 09 6761Product Highlights• Light weight• Short-circuit, overload <strong>and</strong> over-temperature protection• Open circuit protection• Reduced power losses, decrease self-heating of the ballast• Soft start maximises lamp life• Dimmable with trailing edge dimmer• Constant voltage for complete load range• Complies to all relevant st<strong>and</strong>ards• Dimmer compatibility load indication• Small compact housing, for build in into luminairesET 20-105VA LE/TEArticle Number: 09 6816Product Highlights• Suitable for leading <strong>and</strong> trailing edge dimmers Trailing edge dimmer:Load range 20...105W Leading edge dimmer: Load range 50...105W• Loop in loop out primary connection• 3 lamp connection on secondary• Light weight• Short-circuit, overload <strong>and</strong> over-temperature protection• Open circuit protection• Reduced power losses, decrease self-heating of the ballast• Soft start maximises lamp life• Constant voltage for complete load range• Output voltage 11.8V at 240V input• Complies to all relevant st<strong>and</strong>ards• Dimmer compatibility load indAdditional Product HighlightsAdditional Product HighlightsäquivalentTechnical DataTechnical DataPower20-70WPower20-105WNetzspannungMains frequencyPower factorDimmer load indicationLoad rangeSecondary voltageRated currentOperating frequencyLength x Width x HeightPower lossesAmbient temperature230 V~50...60 Hz0,99C20...70 VA11,4 V~ eff295 mAca. 3,5 kHz64 x 70 x 29 mmca. 3,2 W-20°C...+50°CNetzspannungMains frequencyPower factorDimmer load indicationLoad rangeSecondary voltageRated currentOperating frequencyLength x Width x HeightPower lossesAmbient temperature230 -240 V~50...60 Hz0,99L, C20/50...105VA11,8 V ~ eff460 mA35 kHz160 x 40 x 30 mmca. 5 W-20°C...+50°CWeightca. 85 gWeightca. 150 gTechnical DrawingTechnical DrawingTransformer3,4402561644,24,442912554627076 1603<strong>08</strong>6Subject to technical modification

ET 20-105VA LE ‚HANDY‘Article Number: 09 6835Product Highlights• Light weight• Short-circuit, overload <strong>and</strong> over-temperature protection• Open circuit protection• Reduced power losses, decrease self-heating of the ballast• Soft start maximises lamp life• Dimmable with trailing edge dimmer• For difficult installation conditions (fits through a ceiling opening of58 mm with a - restricted height of 28 mm )• Complies to all relevant st<strong>and</strong>ards• Dimmer compatibility load indicationFits through a ceiling opening of 58 mm with a restiricted height of28 mm, max. thickness of ceiling 12 mm.Additional Product HighlightsäquivalentTechnical DataPowerRated VoltageMains frequencyPower factorDimmer load indicationLoad rangeSecondary voltageRated currentOperating frequencyLength x Width x HeightPower lossesAmbient temperatureWeight20-105W230 - 240 V~50...60 Hz0,99C20...105 VA12 V ~ eff460 mAca. 46 kHz128 x 49 x 28 mmca. 6 W-20°C...+50°Cca. 115 gTechnical Drawing12857max. 28Transformer234976.6í 3.5www.hueco.com 87

ET 50-150VA LEArticle Number: 09 6860Product Highlights• Output voltage 12V ~ eff• Light weight• Open circuit protection• Reduced power losses, decrease self-heating of the ballast• Soft start maximises lamp life• Dimmable with trailing edge dimmer• Constant voltage for complete load range• Loop in loop out primary connection• 3 lamp connection on secondary• Complies to all relevant st<strong>and</strong>ards• Dimmer compatibility load indicationAdditional Product HighlightsTechnical DataPowerRated VoltageMains frequencyPower factorDimmer load indicationLoad rangeSecondary voltageRated currentOperating frequencyLength x Width x HeightPower lossesAmbient temperatureWeight50-150W230 - 240 V~50...60 Hz0,99C50...150 VA12 V ~ eff650 mA42 kHz220 x 45 x 40 mmca. 7 W-20°C...+50°Cca. 245 gTechnical DrawingTransformer4.3454.318754022<strong>08</strong>8Subject to technical modification

x xx xx xx xx xx xx xx xx xx xx xx xx xET 100-210VA LEArticle Number: 09 6851Product Highlights• Light weight• Short-circuit, overload <strong>and</strong> over-temperature protection• Open circuit protection• Reduced power losses, decrease self-heating of the ballast• Soft start maximises lamp life• Dimmable with trailing edge dimmer• Constant voltage for complete load range• Loop in loop out primary connection• Complies to all relevant st<strong>and</strong>ards• Dimmer compatibility load indicationET 6-WAY CONNECTORArticle Number: 09 6719Product Highlights• Light weight• Compact housing• 6 fully shrouded terminals for protection agianst accidental contact(max. 2,5mm²)• max. 100W per connection (12V) or I=8.5A• max. 210W total load (12V) oder I=17.5A• Can also be used with conventional transformers, provided that theyare protected on sec. SideAdditional Product HighlightsAdditional Product HighlightsTechnical DataTechnical DataPower100-210WPowermax. 210WRated VoltageMains frequencyPower factorDimmer load indicationLoad rangeSecondary voltageRated currentOperating frequencyLength x Width x HeightPower lossesAmbient temperature230 V~50...60 Hz0,99C100...210 VA11,3 V ~ eff930 mA33 kHz220 x 45 x 40 mmca. 9,4 W-20°C...+50°CRated voltageLoad rangeOutput voltageAmbient temperatureTrailing edgeLeading edgeLength x Width x HeightWeight12 V~0-210 VA12 V-20°C...+50 °CJaJa63,5 x 36 x 19 mmca. 9 gWeightca. 295 gTechnical DrawingTechnical Drawing45Transformer4.34.31875363.5x x4018.63.7 63.5 103220www.hueco.com 89

DIMMER 60-750W A-DIMArticle Number: 09 6001Product Highlights• Flicker-free dimming• Load range (60-750W at a temperature of 40°C at each dimmer)• High-voltage halogen <strong>and</strong> inc<strong>and</strong>escent lamps are also dimmable(60-500W)• Reduced power losses, decrease self-heating of the ballast• Simple control via built-in 1-10V interface, potentiometer, manualcontrol devices, photosensors, etc.• Capable of dimming halogen <strong>and</strong> fluorescent lamps via a 1-10 Vdimmer• Dimmers can be linked via 1-10V interface to increase dimmingcapability, with each dimmer connected to different mains circuits• Short-circuit, overload <strong>and</strong> over-temperature protection• Dimmer compatibility load indication• Important notice: When operating the phase-cut dimmer (750W) infull load, you have to observe that the power loss of transformershas to be taken into consideration.Rated power + power loos < 750WAdditional Product HighlightsWiring diagramExample applicationDimmable BallastTechnical DataRated voltageMains frequencyMaximum loadMinimum loadAmbient temperatureDimmer load markingInterfaceLength x Width x HeightWeight230 V~50 Hz750 W60 W-20°C...+40 °CR,C1...10V220 x 45 x 40 mmca. 235 gTechnical Drawing4.345Dimmer 4.351874022090Subject to technical modification

Multibox HMB 260 packaging unit 50 pcs.*Article Number: 09 6507Product Highlights• Glow-wire test: 850°C• Housing material: PC ABS• Conductor cross-section: from 2 x 0,75 mm² to 5 x 1,5 mm²• Area for a product writing or for a label is present• Optimize installation time• A hanging installation is also possible• Independent housing fits for all HÜCO st<strong>and</strong>ard high performanceballasts (103x67x30, 123x79x33, 129x102x33)• With 4 cable implementations• With 4 screwless strain reliefs* Ballasts <strong>and</strong> cables not includedAdditional Product HighlightsMentre A ≥ 100 mm → B ≥ 160 mmMentre A ≥ 200 mm → B ≥ 125 mmTechnical DataTechnical DrawingSupplieswww.hueco.com 91

Disconnection toolArticle Number: -Press-in tool for IDC contactArticle Number: -Product Highlights• Disconnection-tool, for disconnecting of the wiring from the plug-interminal (WAGO serial 251-3. .)• To disconnect a concuctor bring the tool between the conductor <strong>and</strong>the clip• Including 2 spare blades in the housing• Until you hear a quiet „click-sound“Product Highlights• Easy connection of the conductor with a connection tool• Time-saving wiring with the IDC contact• Fast <strong>and</strong> easy wiring also in pre mounted luminaires, without strippingthe insulation of the conductorAdditional Product HighlightsTechnical DataTechnical DrawingSupplies92Subject to technical modification

Various markings ofelectronic control gearENEC test markThe new European safety mark for lamps is valid in thewhole of Europe. The related number between 1 <strong>and</strong> 16refers to the respective testing laboratory, the 10 to theVDE.VDE test markProducts that carry this VDE symbol meet the safetyrequirements according to EN 61046 (transformers) or EN60928 (electronic ballasts).VDE-EMV test markFor equipment, which corresponds to the st<strong>and</strong>ards forelectromagnetic compatibility (EMV, disturbance transmission,immunity from disturbance).Independent ConvertorThe transformer can be fitted outside the lamps without anadditional housing.Non-inherently short-circuit proof convertorShort-circuit proof convertor which incorporates a protectivedevice which opens the circuit or reduces the currentin the input circuit or the output circuit when the convertoris overloaded or short-circuited.Class II Luminaires in accordance with EN 60598An earth connection is not required.A temperature - protected convertorThe overtemperature protection ensures that the housingtemperature stipulated in the triangle is not exceeded evenin unusual operating conditions. An earth connection is notrequired.SELV (Safety Extra Low Voltage)SELV - formerly known as protective extra-low voltage isnow mentioned as extra-low voltage against electric shock.SELV is considered protection class III according to DIN EN61140 (VDE 0140-1). This means with SELV there is noearth wire. Metal housings may not be earthed <strong>and</strong> voltagemust be extra-low.Maximum recommended temperature refers tothat at the case tc pointMaximum recommended ambient temperature (°C)May be fitted on wood in accordance with DINVDE 0710 T 14Establishing of ballasts in energy efficiencyclassesA3 =A2 =A1 =Electronic ballastElectronic ballast with reduced lossesDimmable electronic ballastCE SymbolThe CE Symbol is not a test mark but simply declares thatthe product complies with EC guidelines. Compliance isthe responsibility of the individual manufacturers <strong>and</strong> doesnot affect <strong>National</strong> Product or Safety st<strong>and</strong>ards. The CESymbol refers in particular to interference emissions <strong>and</strong>immunity of the equipment. The CE Symbol is compulsoryfrom 01. January 1996.HLCEN 60929EN 61000-3-2S&EActive power factor correctionDevices bearing this symbol have the following advantages:• Active harmonic wave filter• Power factor approximately 1• Fully electronic circuit system• current consumption almost sinusoidal• little distortions of the rated current• Total harmonics typ.

Savings by use ofelectronic BallastsFully electronic ballasts have a high energy saving potential in comparisonto conventional ballasts. This is due to the following factors:• up to 25% lower system load• up to 50% longer lamp life due to high frequency operation• reduced maintenance costs due to longer periods betweenreplacements• reduced airconditioning costs due to savings in power loss• reduced connection charges due to the smaller system loading forthe same light outputMB LLMB EB EB+ EB++-7% -25% -50% -60%Further AdvantagesThe fully electronic construction of HÜCO ballasts offers a series of significantperformance advantages with regard to lighting quality, lightingcomfort <strong>and</strong> safety of operation:• no flickering <strong>and</strong> no noise when the light is switched on <strong>and</strong> inoperation• operating with direct current voltage is permitted; i.e. may be fittedto safety <strong>and</strong> emergency lighting in accordance with VDE 01<strong>08</strong>• no stroboscopic effects with rotating machines• reduced luminous flux loss during the complete life span of thelamp due to high frequency operation• reduced self-heating due to minimal losses• automatically restarts once the lamp has been changed• conventional ballasts can emit noise around the audible thres-hold,HÜCO ballasts almost run noiselessInterference SuppressionHÜCO ballasts meet EMC guide-lines.WeightDepending on the rating HÜCO ballasts weigh between ca. 40 <strong>and</strong> ca.400 gms. This, along with their compact design, makes them extremelysuitable for fitting into suspended ceilings, or cramped <strong>and</strong> restrictedspaces.Energy balance by the example 1x58W T8Magnetic ballast:Lamp power 58W, Ballast losses 13W, Total circuit power 71WLow loss magnetic ballast:Lamp power 58W, Ballast losses 8W, Total circuit power 70WHÜCO electronic ballast:Lamp power 50W, (with same light output), Ballast losses 4W, Totalcircuit power 56WHÜCO electronic ballast + daylight sensor:Total circuit power 35W (average)HÜCO EVG + daylight sensor + PIR sensor:Total circuit power 28W (average)D.C. Voltage OperationHÜCO ballasts are suitable for DC operation. The voltage range in whichignition can be guaranteed depends on the configuration of the ballast.Further information can be found on the product description pages. Maybe used for emergency lighting applications in accordance with VDE01<strong>08</strong>. Extra costs for emergency needs are not incurred.The battery load is significantly smaller when a HÜCO ballast is used incontrast to conventional emergency lighting systems. This means eithera longer emergency lighting time or a smaller battery design. Pleasenotice that HÜCO ballasts got a programmed start. After mains interruptionthe restart time will be 1,5s in any case. The ballast are not suitablefor emergency application with restart in less then 1,5s.Lamp Life SpanDue to the stable operation at High Frequency Voltage, the lamp loadis lower. This results in a longer lifespan of the lamp by up to 50% <strong>and</strong>thereby a reduction in purchase, replacement <strong>and</strong> maintenance costs.Constant Power OutputHÜCO electronic ballasts with an active harmonic wave filter (ActivePFC) ensure a constant power output in the range of 198V to 254V <strong>and</strong>guarantee a regular lighting level irrespective of voltage fluctuations. Asa result there is a constant power supply to the lamp, thus contributingto the increased life of the lamp. (ill. EVG 1)Voltage SupplyHÜCO electronic ballasts are suitable for all European mains voltagesfrom 220V - 240V.Light Output / Lamp PowerThe High Frequency operation achieves the stated light output at a 10%lower lamp power. (ill. EVG 2)Luminous Flux DropA lower luminous flux drop is achieved throughout the entire life ofthe lamp due to High Frequency operation in contrast to conventionaloperating systems.High Frequency OperationAs lamps react very quickly when 50 Hz current is being used, there isthe usual flickering due to the fact that each time the voltage is zero onthe sine-wave, the lamp has to be restarted.When HÜCO ballasts are used the flickering of the lamp will be reducedby more than 90%. Flickering <strong>and</strong> stroboscopic effects are barely noticeable.Start ProcessWarm start : These ballasts have a warm start which ensures the ignition of thelamps is preceded by optimal preheating of the electrodes. This type ofballast is for areas where the light has to be frequently switched on <strong>and</strong>off or where this option is desirable (more than 5 cycles per day)Power LossThere is approximately 75% less power loss with HÜCO ballasts in comparisonto conventional ballasts.94 Subject to technical modification

Savings by use ofelectronic BallastsRelative Systempower of 2 x T8 58W1. Conventional ballast in dual circuit Ballast2. HÜCO Electronic BallastsPrel.110%1.Relative light outputL-Lamp light output as a function of the supply voltage at constantload110%2.100%105%Supply Voltage90%220 V 230 V240 VU100%50 500 5000 50000 HzBlock wiring diagramRFI Filter PFC HF-Amplifier1 2 3Control4212RFI filter:Noise suppression acc. to EN 55015Immunity acc. to EN 61547PFC:harmonics acc. to EN 61000-3-2Sinusoidal line current, high power factorpower constance14334HF-Amplifier:Operation of lamps acc. to EN 60929Secureness ignition, good pre-heatingControl:Safety acc. to EN 60928End of life detection of lamps, monitoring of mains voltage,PFC, HF-Amplifierwww.hueco.com 95

HLC Technology(HÜCO Lamp Control)For several years HÜCO has utilised ‘HLC’ technology (HÜCO LampControl) in dimmable electronic ballasts. Due to its superior performancethis technology is also incorporated in the new generation ofMulti-Power ballasts.1. HÜCO electronic ballast with ’HLC’ techniqueThe ’HLC’ technology makes it possible that the ignition circuit isquasi switched off after ignition of the lamp. The lamp current isthen distributed to both ends of the cathode.Advantages:• Due to the distribution of the lamp current to both cathodes, thetemperature is distributed equally. In comparison to other Cutofftechnologies the thermal stress at the cathodes is lower <strong>and</strong>cathodes failures rates are minimized.• The cathode voltage drop at the lamp is reduced. The result is alower lamp current without loss of luminous flux:2. Electronic ballast with preheating cut-offIf you consider this technique, the preheating circuit is cut off afterignition of the lamp <strong>and</strong> the complete lamp current flows into oneend of the cathode. This technology is identical with the operationof a lamp at a KVG or a WG.(Wire wound)Vorteile:Simple circuit for the limitation of power loss.Nachteile:The complete lamp current is conducted by one cathode pin <strong>and</strong>therefore the cathode is heated up on one side. The ensuing thermalstress could result in failure of the cathode. The cathode voltagedrop at the lamp increases, as a consequence the efficiencyof the lamp decreases.The comparisonWe asked an independent lamp manufacturer to compare the HÜCO’HLC’ technology with an electronic ballast with preheating cut-off, inorder to have verifiable figures for these statements. In the test HÜCOMulti-Power ballast 09 7555 2x18–32 W <strong>and</strong> a comparable ballast withcut-off technology were used. The most widely used ballast type, 2x26WTC-TEL, was tested.The table below shows that the HÜCO ballast with a lamp power of 23,8W provides a luminous flux of 1754 lumen. This means in comparison:1 Watt lower lamp losses at a higher luminous flux! Or in other words: Atnearly the same luminous flux a lower lamp current of 13 mA!The effect is that the lamp is not used at such high temperatures <strong>and</strong>therefore has a longer life-span <strong>and</strong> can be used for various difficultapplications. Reference measurements by HÜCO customers can verifythis!L [lm] P [W] Im/W Ud [V] Id [A]HÜCO ballast with HLC 1754 23,8 73,8 79,1 0,302Ballast with preheatingcut-off1740 24,8 70,2 78,7 0,316Measurements with TC-DEL 26W; average value from measurements with 6 lamps;Ta = 25°CL [lm] - luminous flux in lumenP [W] - lamp power in Wattlm/W - efficiency lumen per WattUd [V] - lamp voltage. in VoltId [A] - lamp current in AmpereThese measurements show the advantage of the HÜCO„HLC“ technology:• Higher efficiency of luminosity• Lower power loss• Higher efficiency96 Subject to technical modification

Max. number of ballasts atminiature circuit breakerMax. number of ballasts at miniature circuit breaker1-pin type B with 16 ampereArt. No. DescriptionMaxNo.095043 BL-HP 1/2x9-21W HS Twingle 23095044 BL-HP 1/2x18W TC-DEL/TEL HS Twingle 23095045 BL-HP 1x15-42W/2x15-26W HS 23095232 BL 1x6-13W HMC Minipower 28095233 BL 1x7-13W HMC Minipower 28095234 BL 1x18W TC-DEL/TEL HMC Minipower 28095235 BL 1x22-26W TC-DEL/TEL HMC Minipower 28095238 BL 1x28W TC-DD HMC Minipower 28097039 BL-HP 1x55W TC-L MS2 19097058 BL-HP 2x55W TC-L MS2 16097078 BL-HP 1x55W TC-L MS A-DIM 19097<strong>08</strong>8 BL-HP 2x55W TC-L MS A-DIM 16097113 BL-HP 1x18W T8 MS3 30097114 BL-HP 1x36W T8 MS3 30097115 BL-HP 1x58W T8 MS3 28097123 BL-HP 2x18W T8 MS3 28097124 BL-HP 2x36W T8 MS3 28097125 BL-HP 2x58W T8 MS3 12097161 BL-HP 3/4x15-24W T8 MS3 28097172 BL-HP 4x18W T26 MS A-DIM 19097176 BL-HP 1x18W T26 MS A-DIM 47097177 BL-HP 1x36W T26/TC-L MS A-DIM 27097178 BL-HP 1x58W T26 MS A-DIM 15097186 BL-HP 2x18W T26 MS A-DIM 27097187 BL-HP 2x36W T26/TC-L MS A-DIM 15097188 BL-HP 2x58W T26 MS A-DIM 10097204 BL-HP 1x14-35W T5 MS2 30097206 BL-HP 1x24-40W T5 / TC-F/L MS2 28097207 BL-HP 1x49W T5 MS2 280972<strong>08</strong> BL-HP 1x54W T5 MS2 28097209 BL-HP 1x55/80W T5 / TC-L MS2 15097214 BL-HP 2x14-35W T5 MS2 28097216 BL-HP 2x24-40W T5 / TC-F/L 15097217 BL-HP 2x49W T5 MS2 15097218 BL-HP 2x54W T5 MS2 15097361 BL-HP 4x14W T5 MS A-DIM 20097363 BL-HP 1x14W T16 MS A-DIM 52097364 BL-HP 1x21W T16 MS A-DIM 42097365 BL-HP 1x28W T16 MS A-DIM 29097366 BL-HP 1x35W T16 MS A-DIM 27097367 BL-HP 1x24W T16 MS A-DIM 37097368 BL-HP 1x39W T16 MS A-DIM 26097369 BL-HP 1x49W T16 MS A-DIM 17097370 BL-HP 1x54W T16 MS A-DIM 15097371 BL-HP 1x80W T16 MS A-DIM 13097373 BL-HP 2x14W T16 MS A-DIM 28097374 BL-HP 2x21W T16 MS A-DIM 22097375 BL-HP 2x28W T16 MS A-DIM 20097376 BL-HP 2x35W T16 MS A-DIM 15097377 BL-HP 2x24W T16 MS A-DIM 24097378 BL-HP 2x39W T16 MS A-DIM 14097379 BL-HP 2x49W T16 MS A-DIM 11097380 BL-HP 2x54W T16 MS A-DIM 10097381 BL-HP 3/4x14W T5 MS3 25097426 BL-HP 1x28W TC-DD HS 28097427 BL-HP 1x36-38W HS 28Art. No. DescriptionMaxNo.097436 BL HP 1x28W TC-DD HC 28097437 BL-HP 1x38W TC-DD HC 28097438 BL-HP 1x55W TC-DD HC 23097475 BL-HP 1x28W TC-DD HC A-DIM 28097477 BL-HP 1x38W TC-DD HC A-DIM 28097516 BL-HP 1x18-40W HC A-DIM 28097526 BL-HP 2x18/24W TC-L/F HC A-DIM 23097534 BL-HP 1x18W TC-DEL/TEL HC 28097535 BL-HP 1x15-42W HC 28097539 BL-HP 1x57W TC-TEL HC 23097540 BL-HP 1x70W TC-TEL HC 23097543 BL-HP 1x/2x9-21W HC Twingle 23097544 BL-HP 1x/2x18W TC-DEL/TEL HC Twingle 23097545 BL-HP 1x/2x15-42W HC Twingle 23097548 BL-HP 1/2 x 26-42W HC Twingle 23097555 BL-HP 2x18-40W HC 23097570 BL-HP 1x26-42W TC-DEL/TEL HC A-DIM 28097571 BL-HP 1x57/70W TC-TEL HC A-DIM 23097574 BL-HP 1x13W TC-DEL/TEL HC A-DIM 28097575 BL-HP 1x18W TC-DEL/TEL HC A-DIM 28097580 BL-HP 2x26-42W TC-DEL/TEL HC A-DIM 23097584 BL-HP 2x13W TC-DEL/TEL HC A-DIM 28097585 BL-HP 2x18W TC-DEL/TEL HC A-DIM 28097586 BL-HP 2x26W TC-TEL/DEL HC A-DIM 23097634 BL-HP 1x55W T5c/TC-L HC 23097635 BL-HP 1x60W T5c HC 23097674 BL-HP 1x55W T5c TC A-DIM 23097675 BL-HP 1x60W T5c HC A-DIM 23097816 BL-HP 1x18-40W HC D-DIM 28097826 BL-HP 2x18/24W TC-L/F HC D-DIM 23097864 BL-HP 1x55W T5c/TC-L HC D-DIM 23097865 BL-HP 1x60W T5c HC D-DIM 23097870 BL-HP 1x26-42W TC-DEL/TEL HC D-DIM 23097875 BL-HP 1x18W TC-DEL/TEL HC D-DIM 28097880 BL-HP 2x26-42W TC-DEL/TEL HC D-DIM 23097885 BL-HP 2x18W TC-DEL/TEL HC D-DIM 23Notice!Conversion for other types of miniature circuit breakersType B, 16 A 100 % (look at table above)Type B, 10 A 63%Type C, 16 A 170%Type C, 10 A 104%• At 2- or 3-pin circuit breakers the max. numbers are reduced by20%• The actual number depends strongly on the net reactance• The data refer to Siemens N-circuit breakerswww.hueco.com 97

Dimmableelectronic ballastsAdvantages of HÜCO, tried <strong>and</strong> tested circuit technology• Flicker-free dimming• Hüco electronic ballasts, increase efficiency, reduce lampchanges,<strong>and</strong> disposal costs• Warm start enhances lamp life• Flicker-free, high frequency operation• Active electronic power factor correction PFC• Integrated performance regulator for constant output• Increased lamp life due to high frequency operation• „St<strong>and</strong>-by“- operation when the lamp is defective• Due to the fully electronic circuit there is no irritating noise• Meets national <strong>and</strong> international st<strong>and</strong>ards thereby ensuringreliabilityApplicationHÜCO dimmable ballasts are designed for the operation of st<strong>and</strong>ardlamps.ControlControl is via an isolated 1-10 V/DC interface. Connection by cablesfirm against by mains rated cables voltage.(Interface not in accordance with SELV)Consequently the unit may be controlled on different phases.Complex lighting systems can be controlled via a 1-10 V interface. Thisinterface has been incorporated into various HÜCO product; allowingsimultaneous dimming of Compact fluorescent lamps, low voltage halogen<strong>and</strong> GLS.Control Options• switch or control panel (electronic potentiometer)• IR-remote control• Light sensors for daylight lighting light controlBy combining the control modules listed with signal amplifiers, thenumber of electronic ballasts can be even extended.Reference list of the above mentioned modules see also page 116.Assembly <strong>and</strong> Operation• Switch off the mains• Wire according to specification• Ensure the correct lamp is fitted• Switch on the mains <strong>and</strong> carry out function testImportant Instructions• Installation <strong>and</strong> fitting should only be carried out by an approvedelectrical contractor• Electronic ballasts <strong>and</strong> lights with inductive ballasts should not befitted in the same circuit• When three-phase systems are being used, ensure that the neutralconnection is fitted. Neutral interruption may result in overvoltage,thus damaging the ballast.• The maximum permitted temperature should not be exceeded• Ensure there is adequate heat dissipation• Low ambient temperatures prolong the life of the ballast• In lighting systems with high frequency ballasts, it is recommendedto check the relevant manufacturer’s directions when selectingsensitive IR-controls• Connection of the 1-10 V Interface by main rated cables (Interfacenot in accordance with SELV)Recommended Cable Length <strong>and</strong> Cross SectionPlease choose the cable length according to the manufacturer indicationsfor cable capacities. We recommend that when using dimmingdouble ballasts, the cables between the ballast <strong>and</strong> the lamp are thesame length. If one lamp fails, both lamps should be replaced withlamps of the same type <strong>and</strong> manufacturer. The terminal blocks are suitablefor a conductor cross-section of maximum 1,5 mm 2 .Earth ConnectionIt is to be noted that in order to ensure smooth operation, an earthconnection should be fitted.Adjustment rangeMinimum Luminous Flux: With 1V - signal at the control terminalsMaximum Luminous Flux: With 10V - signal at the control terminalsComfortable <strong>Lighting</strong>HÜCO dimmable ballasts enable a uniform <strong>and</strong> individual dimming offluorescent lamps. HÜCO electronic ballasts work in the High Frequencyrange i.e. the gas discharge in the lamp is not interrupted. The lampoperates evenly without the electrode flickering <strong>and</strong> therefore emits acomfortable <strong>and</strong> relaxing light.StartingThe ballasts can be started at any position of the dimmer. The lampprotectingwarm start guarantees reliable operation of the ballast evenif the light has to be frequently switched on <strong>and</strong> off.Due to optimized management of the lamps excessive luminous flux(flash) can be avoided at switch on.Voltage SupplyHÜCO dimmable ballasts are of a configuration which is suitable for allEuropean mains voltages. They are also suitable for d.c. operation.Interference SuppressionHÜCO products meet EMC guidelines.98 Subject to technical modification

DALI dimmableelectronic ballastsDALI is the abbreviation for „Digital Addressable <strong>Lighting</strong>Interface“ - The new st<strong>and</strong>ard for controllable lighting systemsAs a leading manufacturer of Electronic Ballasts <strong>and</strong> initial member ofthe AG DALI, HÜCO has contributed to developing a new st<strong>and</strong>ard forlighting control.This new st<strong>and</strong>ard provides more comfort <strong>and</strong> flexibility for lighting systems<strong>and</strong> at the same time reduces system costs. The function ofDALI ballasts is superior to the analog (1-10 V) controlled electronicballasts. Despite the parallel wiring of the DALI electronic ballasts, theycan be controlled singly (switching on <strong>and</strong> off directly via the control linewithout additional relay) <strong>and</strong> can be combined in banks <strong>and</strong> scenes.In addition, DALI ballasts offer the possibility of checking the operatingcondition of the lamp <strong>and</strong> the electronic ballast.Examples of circuits fordimmable ballastsWiring plan for smaller configuration with manualpotentiometer. The number of electronic ballasts in the configurationdepends on type of manual potentiometer.1...10V vs. DALI summaryAddressable individuallyGroup settingScene settingIntegrated system switchingSt<strong>and</strong>ard operationTwo-wire controlIsolated interfacePolarity independ interface1...10VDALIWiring plan For larger configuration with additionalsignal amplifier. The number of electronic ballasts in the configurationdepends on type of signal amplifier.The DALI St<strong>and</strong>ard has now been included in the ballast norm IEC60929(E) <strong>and</strong> therefore facilitates the operation of ballasts from differentmanufacturers at the same time in one control system.Initially DALI, was conceived as a ‚st<strong>and</strong> alone‘ solution but subsequentlyit has been developed to be integrated in other building managementsystems via the relevant interface. (EIB, LON etc.)DALI ballasts are based on the tried <strong>and</strong> tested reliable technology ofanalog ballasts. This led to 100% compatibility <strong>and</strong> the adherence ofthe DALI st<strong>and</strong>ards acc. to IEC 60929(E). HÜCO DALI ballasts regularlyundergo rigorous testing to ensure compatibility with requirementsof the st<strong>and</strong>ard.Important product characteristics of HÜCO DALI ballastsDimming each device with one potentiometer• Microprocessor controlled• DALI interface with extended over-voltage immunity• Multipower technology (one electronic ballast suitable for differentlamps)• very compact shape• energy-saving (energy class EEI = A1)• flicker-free dimming from 100% to 3%• optimal lamp operation by HLC technology (HÜCO lamp control)• warm start of the lamp <strong>and</strong> operation acc. to EN 60929• Fulfills requirements of the new EN 61347 st<strong>and</strong>ard (previouslyEN60928)• ENEC approved• 3 years warrantyPotentiometer0-150-220 kΩ logNotice:The maximum quantity of dimmable electronic ballasts dependson: the capacity of the automatic fuses <strong>and</strong> on the capacity ofthe relays.www.hueco.com 99

Reference list control equipment1-10 V controlsManufacturerElectronicPotentiometerSignalAmplifierAC/DCConverterIR - ModuleControl UnitLight/MovementSensorAltenburger 50.50.000 50.13.300 50.13.301 16.03.050 50.13.116 50.13.40050.50.001 16.03.060 50.13.145 50.13.41050.50.002 50.13.112 50.13.120 50.13.41150.50.010 50.13.113 50.13.121 50.13.50050.50.011 50.13.115 50.13.218 50.13.50150.50.012 50.13.142 50.13.320 50.13.51050.50.020 50.14.116 50.13.51150.50.021 50.13.52050.50.022 50.13.52150.50.030 50.13.53050.50.031 50.13.53150.50.03250.50.04050.50.04150.50.042Busch-Jaeger 2112-U-101 6153 EB 6045 6550 U-1012112-101 6953 EB-101 6066-xxx 65502112 UJ-212 6020-xx2112 AJ 6021-xx2112 UJ-214-510 6010-252112 U-101-500Feller 3310... * 3585-1.EUR.603330... * 3585-1.X.613564-1.EUR.613504.F. 60.9013504.F. 60.9023504.F. 60.903Elko 397062226318GIRA 03<strong>08</strong> 00 0359 000309 00 0360 00<strong>08</strong>60 00<strong>08</strong>65 001019 001137 00JUNG 240-10 2092 REG X 240-10 EB PMU 360 WW240-31 2193 REG PMK 360 WW1240 STE FST 1240 REG FPM 360 WWFST 1240 EBLegr<strong>and</strong> 775901 049511 003658048501OSRAM DIM MCU P DIM SA DALI CON 1-0 LI DIM MULTI 2 DIM PICODALI CON 1-10DIM MULTI 3 DIM MICOSODIM MULTILS/PD MULTI 3LS/PD MULTI 3 BLS/PD MULTI3 FLPHILIPS LPS 100/00 IRC 2130 LRC 1010 LRL 1220 T5LPS 100/01 IRT 8030 LRC 1015 LRL 1220 T8IRT 8050/00 LRC 1020 LRI 8133/10IRR 8124 LRC 1025IRR 8125 LRD 8010/10LRL 8101/10SIEMENS5TC84245TC8425SIMON 27317 -32 -3575317 -39Because of the variety of manufacturers this table only contains a small selection of products.The exact product program with novelties <strong>and</strong> changes is available from the respective manufacturer. All data without guarantee.100Subject to technical modification

Lifetimeof HÜCO ballastsIncrease life time of your fitting!The life time of a fitting depends on the ambient temperature, thequality of the assigned components <strong>and</strong> the design. The maximumambient temperature is governed by the application, so the technicaldesigner can affect the quality of the fitting only by careful selectionof components <strong>and</strong> a conscientious design. A critical <strong>and</strong> life timedetermining component is the electronic ballast.Just as the life time of the fitting is determined by the ballast, sothe life time of the ballast is determined by the assigned electrolyticcapacitors. Due to the expecting life time of the Elko, the life timeof the ECG will reach at least 50.000h with tc max, except for fewexceptions. Whereby the indicated value refers to a maximum failurerate of 10%, operated with tc max.For Multipower ballasts, the measurement was done with max. allowedlamp. That means, e.g. a Multipower fitting for 26-42W reachthe maximum tc point temperature with a 42W lamp <strong>and</strong> with 26Wlamp the tc point temperature is 10°C lower; then the life time for26W will be doubled.How does HÜCO realizehigh life time <strong>and</strong> reliability?Electrical concept:To resist against short- <strong>and</strong> long- term over voltage, we use more robustcomponents <strong>and</strong> an additional over voltage protection. The overvoltages on mains (Surge <strong>and</strong> Burst) are relatively well known today<strong>and</strong> converted into a normative requirement. HUECO ballasts are fullytested in accordance with the st<strong>and</strong>ard <strong>and</strong> comply with the generalrequirements. Additionally HUECO ballasts except the Minipowerproduct range are resistive against over voltage, 320V for 48h <strong>and</strong>350V for 2h (e.g. neutral interruption).Mechanical concept:The insensitivity to mechanical loads such as vibrations <strong>and</strong> impacts isreached by the employment of SMD components. SMD’s do not havelong connection legs <strong>and</strong> a lower weight than discrete components.SMD’s are soldered or stuck on the printed circuit board. Electronictransformers of HUECO have additionally double sided printed circuitboards. This guarantees a further mechanical security for speciallyloaded components like terminal blocks <strong>and</strong> output transformers.Thermal concept:Application example:By a skilful luminairy construction it is possible to reduce the tcpointtemperature <strong>and</strong> the Elko temperature in such a way whichwill disburse themselves this by the rise of the life span.Is it possible as in the example to realise a temperature reductionof 10°C, the life span of the EVG will increase approximately to thedouble.Also in this point HÜCO went a clear, but not very easy way. As heataffects the life time negatively <strong>and</strong> heat is the result of power losses,the best way is to reduce the power losses on a minimum! Due toour experience of many years in the development of ballasts, wehave succeeded in reducing the power losses by more than half. Forexample a 2x 26W TC-TEL ballast has power losses of only 3,5W ata power consumption of 53W. This corresponds to an efficiency ofapprox. 93%. Further, only quality components are used <strong>and</strong> thetechnical specification of the components is never exceeded. WithHÜCO, particularly temperature-sensitive components (e.g. electrolyticcapacitors) are positioned in such a way that they have sufficientclearance from hot components such as coils.Which factors determine the life time of a EVG?The life time of a ballast will be influenced by the electrical- mechanical<strong>and</strong> thermal- stress, for example high ambient temperature, voltagepeaks on mains <strong>and</strong> vibrations.www.hueco.com 101

ElectronicTransformersConnection - Primary SideSome Hüco transformers provide a loop in loop out facility on the primaryside of the transformer, eliminating complex wiring <strong>and</strong> at thesame time reducing installation costs. Strain relief is also provided forboth cables.Connection - Secondary SideAll HÜCO transformers up to 150VA permit the connection of cablesof up to 2,5 mm 2 core cross-section <strong>and</strong> on a 210VA transformer upto a maximum of 4mm 2 . On 105VA types up to 3 lamps can be fitteddirectly to the 6-way terminal block.Dimmer operationElectronic transformers can be operated with st<strong>and</strong>ard trailing edgephase-cut dimmers but when a dimmer is used, the power consumptionof the dimmer will cause a reduction in the maximum achievablebrightness. (ill. ET 1)Interference SuppressionAll HÜCO transformers meet EMC guidelines.Silent RunningWith HÜCO transformers are used only highly developed electronic constructionunits. Thus annoying humming of conventional transformersis void.Light weight <strong>and</strong> compact shapeHÜCO transformers are characterised, depending upon equipment specification,by a small weight from ca. 40g to ca. 270g <strong>and</strong> very compactdimensions.Overload <strong>and</strong> Short Circuit ProtectionHÜCO transformers have integrated overload <strong>and</strong> short-circuit protection.Once the short-circuit or the overload has been removed, theywill automatically switch on again. Exception: 210VA transformer. Theelectronic protection circuit on the 210VA transformer is reset after themains supply has been interrupted for at least > 3 sec.Overtemperature ProtectionDue to low power loss, HÜCO transformers have ample temperaturereserves. Most types are automatically switched off by a reversible electronicover-temperature sensor as soon as a specified temperature isexceeded. After a short cooling-down period the transformer will automaticallyswitch on again.Ambient TemperatureHÜCO transformers operate trouble-free in a temperature range of-20°C to 50°C or °60°C. Unhoused configurations can operate in higherambient temperature ranges. Further information is available on requestfrom our Customer Service Personnel.Power LossThe minimal power loss of HÜCO transformers guarantees a sure <strong>and</strong>lasting operation, even under thermally unfavourable conditions.Cable Strain ReliefFor those types of transformers designed for domestic <strong>and</strong> commercialinstallation there is an interchangeable cable strain relief availableso that all st<strong>and</strong>ard cable types (flat, round, NYM) may be connectednormally. (ill. ET 2)No-Load ProtectionHÜCO transformers can be run without secondary load (missing ordefective lamp) for an unlimited time.Abb. ET 1Dimmer operationRecommended Mains Voltage RangeThe maximum recommended Mains Voltage is rated voltage 230V+10%. For application in countries which do not use 230V, compatibletransformers are available.Harmonic Content of the Mains SupplyHÜCO products meet EMC guidelines.Leading edge dimmingTrailing edge dimmingProtectionAll HÜCO independent converters are manufactured to Class II <strong>and</strong> aresuitable for operating in Class II <strong>and</strong> III luminaires.SoftstartHÜCO transformers have an electronic starting current restriction whichenables a start without damaging the lamp (softstart). The lifespan ofthe lamp is therefore not reduced, particularly if it is frequently switchedon <strong>and</strong> off.Abb. ET 2Part Load OperationIn contrast to conventional transformers, the output voltage variesvery little when different loads are used. A minimum load is howeverrequired in order to make the circuit active. The transformer will notbe damaged should the minimum load fall below that recommended,however, it can cause flickering of the lamp.Cable strain reliefa.) Without reversible insertb.) For round cablesc.) For flat cablesa)b) c)102Subject to technical modification

Sales <strong>and</strong> Supply Conditions HÜCO electronic GmbHRange lighting electronics, Status 05/2002I. General1. The scope of deliveries <strong>and</strong>/or services (hereinafter referred to as„Supplies“) shallbe determined by the written declarations of both Parties. General terms <strong>and</strong>conditions of the Purchaser shall apply only if <strong>and</strong> when expressly accepted by thesupplier or the provider of services (hereinafter referred to as „Supplier“) in writing.2. The Supplier herewith reserves any industrial property rights <strong>and</strong>/or copyrightspertaining to its cost estimates, drawings <strong>and</strong> other documents (hereinafter referredto as „Documents“). The Documents shall not be made accessible to third partieswithout the Supplier’s prior consent <strong>and</strong> shall, upon request, be returned withoutundue delay to the Supplier if the contract is not awarded to the Supplier. Sentences1 <strong>and</strong> 2 shall apply mutatis mut<strong>and</strong>is to documents of the Purchaser; these may,however, be made accessible to third parties to whom the Supplier may rightfullytransfer Supplies.3. The Purchaser shall have the non-exclusive right to use st<strong>and</strong>ard software, providedthat it remains unchanged, is used within the agreed performance parameters, <strong>and</strong>on the agreed equipment. The Purchaser may make one back-up copy withoutexpress agreement.4. Partial Supplies shall be allowed, unless they are unreasonable to accept for thePurchaser.II. Prices <strong>and</strong> terms of payment1. Prices shall be ex works <strong>and</strong> exclude packaging; value added tax shall be added at thethen applicable rate.2. If the Supplier is also responsible for assembly or erection <strong>and</strong> unless otherwiseagreed, the Purchaser shall pay the agreed remuneration <strong>and</strong> any incidental costsrequired, e. g. travel costs, costs for the transport of tools <strong>and</strong> equipment, <strong>and</strong>personal luggage as well as allowances.3. Payments shall be made free Supplier’s paying office.4. The Purchaser may set off only those claims that are undisputed or against which nolegal recourse is possible.III. Retention of title1. Items pertaining to the Supplies („Retained Goods“) shall remain the property of theSupplier until each <strong>and</strong> every claim the Supplier has against the Purchaser on accountof the business connection has been fulfilled. If the combined value of the securityinterests of the Supplier exceeds the value of all secured claims by more than 20 %,the Supplier shall release a corresponding part of the security interest if so requestedby the Purchaser.2. For the duration of the retention of title, the Purchaser may not pledge the RetaineGoods or use them as security, <strong>and</strong> resale shall be possible only for resellers in theordinary course of their business <strong>and</strong> only on condition that the reseller receivespayment from its customer or makes the transfer of property to the customerdependent upon the customer fulfilling its obligation to effect payment.3. The Purchaser shall inform the Supplier forthwith of any seizure or other act of interventionby third parties.4. Where the Purchaser fails to fulfil its duties, including failure to make payments due,the Supplier shall be entitled to cancel the contract <strong>and</strong> take back the RetainedGoods in the case of continued failure following expiry of a reasonable time set by theSupplier; the statutory provisions that a time limit is not needed remain unaffected.The Purchaser shall be obliged to surrender the Retained Goods.IV. Time for supplies; delay1. Times set for Supplies can only be observed if all Documents to be supplied by thePurchaser, necessary permits <strong>and</strong> releases, especially concerning plans, are receivedin time <strong>and</strong> if agreed terms of payment <strong>and</strong> other obligations of the Purchaserare fulfilled. Unless these conditions are fulfilled in time, times set shall be extendedappropriately; this shall not apply where the Supplier is responsible for the delay.2. If non-observance of the times set is due to force majeure such as mobilization, war,rebellion or similar events, e. g. strike or lockout, such time shall be extendedaccordingly.3. If the Supplier is responsible for the delay (hereinafter referred to as „Delay“) <strong>and</strong>the Purchaser demonstrably suffered a loss therefrom, the Purchaser may claim acompensation as liquidated damages of 0.5 % for every completed week of Delay, butin no case more than a total of 5 % of the price of that part of the Supplies whichbecause of the Delay could not be put to the intended use.4. Purchaser’s claims for damages due to delayed Supplies as well as claims for damagesin lieu of performance exceeding the limits specified in No. 3 above shall be excludedin all cases of delayed Supplies even upon expiry of a time set to the Supplier to effectthe Supplies. This shall not apply in cases of m<strong>and</strong>atory liability based on intent, grossnegligence, or due to injury of life, body or health. Cancellation of the contract by thePurchaser based on statute shall be limited to cases where the Supplier isresponsible for the delay. The above provisions do not imply a change in the burdenof proof to the detriment of the Purchaser.5. At the Supplier’s request the Purchaser shall declare within a reasonable period oftime whether the Purchaser cancels the contract due to the delayed Supplies or insistson the Supplies to be carried out.6. If dispatch or shipment is delayed at the Purchaser’s request by more than one monthafter notice of the readiness for dispatch was given, the Purchaser may be charged, forevery month commenced, storage costs of 0.5 % of the price of the items of the Supplies,but in no case more than a total of 5 %. The parties to the contract may prove thathigher or, as the case may be, lower storage costs have been incurred.V. Transfer of risk1. Even where delivery has been agreed freight free, the risk shall pass to the Purchaseras follows:a) if the Supplies do not include assembly or erection, at the time when the Suppliesare shipped or picked up by the carrier. Upon request of the Purchaser, the Suppliershall insure the Supplies against the usual risks of transport at the expense of thePurchaser;b) if the Supplies include assembly or erection, at the day of taking over in the ownworks or, if so agreed, after a fault-free trial run.2. The risk shall pass to the Purchaser if dispatch, shipping, the start or performanceof assembly or erection, the taking over in the own works or the trial run is delayed forreasons for which the Purchaser is responsible or if the Purchaser has otherwise failedto accept the Supplies.VI. Assembly <strong>and</strong> erectionUnless otherwise agreed in writing, assembly/erection shall be subject to the followingprovisions:1. The Purchaser shall provide at its own expense <strong>and</strong> in good time:a) all earth <strong>and</strong> construction work <strong>and</strong> other ancillary work outside the scope of theSupplier, including the necessary skilled <strong>and</strong> unskilled labour, construction materials<strong>and</strong> tools,b) the equipment <strong>and</strong> materials necessary for assembly <strong>and</strong> commissioning such asscaffolds, lifting equipment <strong>and</strong> other devices as well as fuels <strong>and</strong> lubricants,c) energy <strong>and</strong> water at the point of use including connections, heating <strong>and</strong> lighting,d) suitable dry <strong>and</strong> lockable rooms of sufficient size adjacent to the site for thestorage of machine parts, apparatus, materials, tools, etc. <strong>and</strong> adequate working <strong>and</strong>recreation rooms for the erection personnel, including sanitary facilities as areappropriate in the specific circumstances. Furthermore, the Purchaser shall takeall measures it would take for the protection of its own possessions to protect thepossessions of the Supplier <strong>and</strong> of the erection personnel at the site,e) protective clothing <strong>and</strong> protective devices needed due to particular conditionsprevailing on the specific site.2. Before the erection work starts, the Purchaser shall make available of its own accordany information required concerning the location of concealed electric power, gas <strong>and</strong>water lines or of similar installations as well as the necessary structural data.3. Prior to assembly or erection, the materials <strong>and</strong> equipment necessary for the work tostart must be available on the site of assembly/erection <strong>and</strong> any preparatory workmust have advanced to such a degree that assembly/erection can be started asagreed <strong>and</strong> carried out without interruption. Access roads <strong>and</strong> the assembly/erectionsite itself must be level <strong>and</strong> clear.4. If assembly, erection or commissioning is delayed due to circumstances for which theSupplier is not responsible, the Purchaser shall bear the reasonable costs incurred foridle times <strong>and</strong> any additional travelling of the Supplier or the erection personnel.5. The Purchaser shall attest to the hours worked by the erection personnel towardsthe Supplier at weekly intervals <strong>and</strong> the Purchaser shall immediately confirm in writingif assembly, erection or commissioning has been completed.6. If, after completion, the Supplier dem<strong>and</strong>s acceptance of the Supplies, the Purchasershall comply therewith within a period of two weeks. In default thereof, acceptanceis deemed to have taken place. Acceptance is also deemed to have been effected ifthe Supplies are put to use, after completion of an agreed test phase, if any.VII. Receiving of suppliesThe Purchaser shall not refuse to receive Supplies due to minor defects.VIII. Defects as to qualityThe Supplier shall be liable for defects as to quality („Sachmängel“, hereinafter referredto as „Defects“,) as follows:1. All parts or services where a Defect becomes apparent within the limitation periodshall, at the discretion of the Supplier, be repaired, replaced or provided again freeof charge irrespective of the hours of operation elapsed, provided that the reason forthe Defect had already existed at the time when the risk passed.2. a) Claims based on Defects are subject to a limitation period of 12 months. Thiprovision shall not apply where longer periods are prescribed by law according to Sec.438 para. 1 No. 2 (buildings <strong>and</strong> things used for a building), Sec. 479 para. 1 (right ofrecourse), <strong>and</strong> Sec. 634a para. 1 No. 2 (defects of a building) German Civil Code(„BGB“), as well as in cases of injury of life, body or health, or where the Supplierintentionally or grossly negligently fails to fulfil its obligation or fraudulently concealsa Defect. The legal provisions regarding suspension of expiration („Ablaufhemmung“),suspension („Hemmung“) <strong>and</strong> recommencement of limitation periods remainunaffected.b) Extension of Period of LimitationIrrespective of any other contractually or legally stipulated warranty claims, thesupplier shall provide a warranty to the customer in deviation from § 438 Section 1No. 3. of the BGB (German Civil Code) for material defects beyond the two-yearlimitation period until expiry of the 36-month period from delivery for the freedomof the object from material defects. The supplier shall be obligated, within theextended period of limitation, to rectify the defects in, re-supply or renew all partsor perfomances that exhibit deficiencies within the extended period of limitation. Thisshall be subject to the provisions that the cause of the deficiency was already presentat the time of risk transfer <strong>and</strong> that the material defect was caused through the fault ofthe supplier. Article VIII. Nos. 3., 4. <strong>and</strong> 7. shall apply accordingly. Rectification,resupplyor renewal shall be free of charge <strong>and</strong> the decision as to which of thesemeasures or which combination of these measures is taken shall be at the discretionof the sup-plier. Further claims of the customer, in particular claims for damagesor losses, rights of withdrawal or rights to price reduction or claims under a rightof recourse of the customer are excluded within the period of the extended period oflimitation. Claims of the customer on account of the required expenses for thepurposes of subsequent performance, in particular transportation, travel <strong>and</strong> labourcosts <strong>and</strong> costs of materials are also excluded.3. The Purchaser shall notify Defects to the Supplier in writing <strong>and</strong> without unduedelay.4. In the case of notification of a Defect, the Purchaser may withhold payments to area-sonable extent taking into account the Defect occurred. The Purchaser, however,may withhold payments only if the subject-matter of the notification of the Defectoccurred is justified beyond doubt. Unjustified notifications of Defect shall entitle theSupplier to have its expenses reimbursed by the Purchaser.5. The Supplier shall first be given the opportunity to supplement its performance(„Nacherfüllung“) within a reasonable period of time.6. If supplementary performance is unsuccessful, the Purchaser shall be entitled tocancel the contract or reduce the remuneration, irrespective of any claims fordamages it may have according to Art. XI.7. There shall be no claims based on Defect in cases of insignificant deviations fromthe agreed quality, of only minor impairment of usefulness, of natural wear <strong>and</strong> tear orDamage arising after the transfer of risk from faulty or negligent h<strong>and</strong>ling, excessivestrain, unsuitable equipment, defective workmanship, inappropriate foundationsoil or from particular external influences not assumed under the contract, or fromnon-reproducible software errors. Claims based on defects attributable to impropermodifications or repair work carried out by the Purchaser or third parties <strong>and</strong> theconsequences thereof shall be likewise excluded.8. The Purchaser shall have no claim with respect to expenses incurred in the course ofsupplementary performance, including costs of travel <strong>and</strong> transport, labour, <strong>and</strong>material, to the extent that expenses are increased because the subject-matter of theSupplies was subsequently brought to another location than the Purchaser’s branchoffice, unless doing so complies with the intended use of the Supplies.9. The Purchaser’s right of recourse against the Supplier pursuant to Sec. 478 BGB islimited to cases where the Purchaser has not concluded an agreement with itscustomers exceeding the scope of the statutory provisions governing claims based onDefects. Moreover, No. 8 above shall apply mutatis mut<strong>and</strong>is to the scope of the rightof recourse the Purchaser has against the Supplier pursuant to Sec. 478 para. 2 BGB.10. Furthermore, the provisions of Art. XI (Other Claims for Damages) shall apply inrespect of claims of damages. Any other claims of the Purchaser against the Supplieror its agents or any such claims exceeding the claims provided for in this Art. VIII,based on a Defect, shall be excluded.IX. Industrial property rights <strong>and</strong> copyright; defects in title1. Unless otherwise agreed, the Supplier shall provide the Supplies free from thirdparties’ industrial property rights <strong>and</strong> copyrights (hereinafter referred to as „IPR“) withrespect to the country of the place of destination. If a third party asserts a justifiedclaim against the Purchaser based on an infringement of an IPR with respect to theSupplies made by the Supplier <strong>and</strong> then used in conformity with the contract, theSupplier shall be liable to the Purchaser within the time period stipulated in Art. VIIINo. 2 as follows:a) The Supplier shall choose whether to acquire, at its own expense, the right touse the IPR with respect to the Supplies concerned or whether to modify the Suppliessuch that they no longer infringe the IPR or replace them. If this would beunreasonable to dem<strong>and</strong> from the Supplier, the Purchaser may cancel the contract orreduce the remuneration pursuant to the appli-cable statutory provisions.b) The Supplier’s liability to pay damages shall be governed by Art. XI.c) The above obligations of the Supplier shall only apply if the Purchaser(i)immediately notifies the Supplier of any such claim asserted by the third party inwriting, (ii) does not concede the existence of an infringement <strong>and</strong> (iii) leaves anyprotective measures <strong>and</strong> settlement negotiations to the discretion of the Supplier. Ifthe Purchaser stops using the Supplies in order to reduce the damage or for othergood reason, it shall be obliged to pointout to the third party that noacknowledge ment of the alleged infringement may be inferred from the fact that theuse has been discontinued.2. Claims of the Purchaser shall be excluded if it is itself responsible for the infringementof an IPR.3. Claims of the Purchaser shall also be excluded if the infringement of the IPR is causedby specifications made by the Purchaser, to a type of use not foreseeable by theSupplier or to the Supplies being modified by the Purchaser or being used togetherwith products not provided by the Supplier.4. In addition, with respect to claims by the Purchaser pursuant to No. 1 a) above, Art. VIIINos. 4, 5, <strong>and</strong> 9 shall apply mutatis mut<strong>and</strong>is in the event of an infringement of anIPR.5. Where other defects in title occur, Art. VIII shall apply mutatis mut<strong>and</strong>is.6. Any other claims of the Purchaser against the Supplier or its agents or any suchclaims exceeding the claims provided for in this Art. IX, based on a defect in title, shallbe excluded.X. Impossibility of performance; adaption of contract1. To the extent that Supplies are impossible to be carried out, the Purchaser shall beentitled to claim damages, unless the Supplier is not responsible for the impossibility.The Purchaser’s claim for damages shall, however, be limited to an amount of 10 %of the value of the part of the Supplies which, owing to the impossibility, cannot be putto the intended use. This limitation shall not apply in the case of m<strong>and</strong>atory liabilitybased on intent, gross negligence or injury of life, body or health; this does not implya change in the burden of proof to the detriment of the Purchaser. The right of thePurchaser to cancel the contract shall remain unaffected.2. Where unforeseeable events within the meaning of Art. IV No. 2 substantially changethe economic importance or the contents of the Supplies or considerably affect theSupplier’s business, the contract shall be adapted taking into account the principlesof reasonableness <strong>and</strong> good faith. Where doing so is economically unreasonable,the Supplier shall have the right to cancel the contract. If the Supplier intends toexercise its right to cancel the contract, it shall notify the Purchaser thereof withoutundue delay after having realised the repercussions of the event; this shall also applyeven wherean extension of the delivery period had previously been agreed with thePurchaser.XI. Other claimes for damages1. Any claims for damages <strong>and</strong> reimbursement of expenses the Purchaser may have(hereinafter referred to as „Claims for Damages“), based on whatever legal reason,including infringement of duties arising in connection with the contract or tort, shall beexcluded.2. The above shall not apply in the case of m<strong>and</strong>atory liability, e. g. under the GermanProduct Liability Act („Produkthaftungsgesetz“), in the case of intent, gross negligence,injury of life, body or health, or breach of a condition which goes to the root of thecontract („wesentliche Vertragspflichten“). However, Claims for Damages arising froma breach of a condition which goes to the root of the contract shall be limited to theforeseeable damage which is intrinsic to the contract, unless caused by intent or grossnegligence or based on liability for injury of life, body or health. The above provisiondoes not imply a change in the burden of proof to the detriment of the Purchaser.3. To the extent that the Purchaser has a valid Claim for Damages according to this Art.XI, it shall be time-barred upon expiration of the limitation period applicable to Defectspursuant to Art. VIII No. 2. In the case of claims for damages under the GermanProduct Liability Act, the statutory provisions governing limitation periods shall apply.XII. Venue <strong>and</strong> applicable law1. If the Purchaser is a businessperson, sole venue for all disputes arising directly orindirectly out of the contract shall be the Supplier’s place of business. However, theSupplier may also bring an action at the Purchaser’s place of business.2. Legal relations existing in connection with this contract shall be governed by Germansubstantive law, to the exclusion of the United Nations Convention on Contracts forthe International Sale of Goods (CISG).XIII. Severability clauseThe legal invalidity of one or more provisions of this contract shall in no way affect thevalidity of the remaining provisions. This shall not apply if it would be unreasonable forone of the parties to continue the contract.XIV. Catalogue informationOnly the catalogue valid at the time of the conclusion of the contract shall apply. All previouscatalogues <strong>and</strong> the information therein shall be rendered invalid by the catalogueapplicable at the time of concluding the contract.All technical values of the supplier‘s product stated in the catalogue are average valuesdetermined from electronically-held operational data.HÜCO electronic GmbHSelection by lampElectronic Ballasts for TC-SEL 7Electronic Ballasts for TC-DEL/TEL 8Electronic Ballasts for TC-L/F 9Electronic Ballasts for TC-DD 10Electronic Ballasts for T5c 11Electronic Ballasts for T5 12Electronic Ballasts for T8 13Electronic Ballasts for HID 83List of article numbers 14Product by typeCompact Electronic Ballasts,not dimmable16 - 3882Compact Electronic Ballasts,1...10V dimmable39 - 49Compact Electronic Ballasts,DALI dimmable49 - 55T5 Electronic Ballasts,not dimmable56 - 63T5 Electronic Ballasts,1...10V dimmable64 - 71T8 Electronic Ballasts,not dimmable72 - 75T8 Electronic Ballasts,1...10V dimmable76 - 81HID Electronic Ballasts 83 - 85Electronic Transformers 86 - 89Trailing Edge Phase-Cut Dimmer 90Accessories 91 - 92

HÜCO electronic GmbH, Espelkamp, GermanyGermany (Headquarters)HÜCO electronic GmbHVon dem Bussche-Münch-Str. 1232339 EspelkampDeutschl<strong>and</strong>Phone: 0049 5772 567 700Fax: 0049 5772 567 940Email: sales.DE@hueco.comNorthern Irel<strong>and</strong>HÜCO Lightronic N.I. Ltd.3 Aghanloo Ind. Estate, Aghanloo RoadLimavady Co. LondonderryNorthern Irel<strong>and</strong>, BT49 OHEPhone: 0044 28 777 60 004Fax: 0044 28 777 60 011Email: sales.GB@hueco.comIndiaHueco Lightronic (India) Pvt. Ltd.Survey No 19, YewlewadiKondhwa, Pune - 411 048IndiaPhone: 0091 20 26 93 3622Fax: 0091 20 26 93 4314Email: sales.IN@hueco.comItalyU.K.ChinaHÜCO Lightronic N.I. Ltd., Limavady, Northern Irel<strong>and</strong>HÜCO electronic GmbHSales Office ItalyVia Cavriana, 320134 MilanoPhone 0039 02 7391 274Fax 0039 02 7391 401Email: sales.IT@hueco.comHÜCO Lightronic N.I. Ltd.Sales Office UKUnit 6, The Gateway, 2A Rathmore RoadLondon SE7 7QWPhone 0044 28 777 60004Fax 0044 28 777 60 011Email: sales.GB@hueco.comHÜCO Lightronic N.I. Ltd.Sales Office ChinaRoom 722, No. 40, Dongzhong St,Donghcheng District, 100027 BeijingPhone 0<strong>08</strong>6 10 51 692605Fax 0<strong>08</strong>6 10 51 692606Email: sales.CN@hueco.comHueco electronic (India) Pvt. Ltd., Pune, IndiaDistributors© by HÜCO electronic GmbHDue to a policy of continuous improvement, HÜCO electronicGmbH reserves the right to amend the specifications <strong>and</strong> detailsin this catalogue without prior noticeThis catalogue replaces all previous material issued by HÜCOAustriaVBE Vertrieb BeleuchtungPragerstraße 1421210 WIENPhone: 0043 1 2782424Fax: 0043 1 2782485Email: vbe@aon.atTurkeySPOT ELEKTRIK Ltd.35. CAD., No. 10/234076 USKUDARPhone: 0090 216 324 33 77Fax: 0090 216 472 87 68Email: info@spotelektrik.comAustralia<strong>Lighting</strong> Australia Pty. Ltd.Unit R2, Regents Park Estate391 Park RoadRegents Park NSW 2143Phone: 0061 02 9738 9444Fax: 0061 02 9738 9499Email: components@lightingaustralia.com.auBelgiumTertium Sprl11, Avenue des lilas1640 Rhode Saint GenesePhone: 0032 2 3614858Fax: 0032 23 583023Email: pierre@tertium.beSwedenVanpée & Co. ABGlanshammarsgatan 1612470 B<strong>and</strong>hagenPhone: 0046 855 621130Fax: 0046 864 78065Email: info@vanpee.seDanmarkVanpée & Westerberg A/STransformervej 212730 HerlevPhone: 0045 44 859000Fax: 0045 44 859<strong>08</strong>7Email: info@vanpee.dkMalaysiaSwitzerl<strong>and</strong>UNI-TEC Engineering PTE Ltd Sir Heian3, Lorong Bakar Batu# 07-01 Brightway BuildingSingapore 348741Phone: 0065 6 7459422Beleuchtungstechnik AGAlte Steinhauserstraße 296330 ChamPhone: 0041 41 7485010Fax: 0065 6 7453930 Fax: 0041 41 7485015Email: enquiries@unitec. Email: info@sir-heian.chcom.sgFranceDitronic S. A. R. L.13, rue des hirondelles67720 WeyersheimPhone: 0033 388 629 027Fax: 0033 388 681 822Email: ditronic@wanadoo.frGreeceTransHellas20-22, Kyparissias streetAgioi Anargir, 13562 AthenPhone: 0030 210 4523740Fax: 0030 210 4523010Email: j.agistriotis@transhellas.comSouth KoreaNorwayIsraelJeung Han Trading Company Vanpée Norge ASElectrosen Ltd.135-21, Chegi-DongROK Tongdaemun-Ku SeoulPhone: 0<strong>08</strong>2 29270531Vestvollveien 6D2020 SkedsmokkorsetPhone: 0047 648 3828023, Hapalmach Street51246 BNEI-BRAKPhone: 00972 3 6184131Fax: 0<strong>08</strong>2 29270536 Fax: 0047 648 38281 Fax: 00972 3 61896805Email: jeunghankr@yahoo. Email: fi rmapost@vanpee.no Email: info@electrosen.co.ilco.krNetherl<strong>and</strong>sRegoort B. V. TechnischeH<strong>and</strong>elsmaatschappijBergstraat 8 – 123035 TD-ROTTERDAMPhone: 0031 10 4658155Fax: 0031 10 4672934Email: info@regoort.nlSpainIndustrial Eléctra CassanenseS. A.Crta/ de Girona a Sant FeliuKm, 1117244 Cassa de la SelvaPhone: 0034 972 46 01 25Fax: 0034 972 46 19 79Email: inecsa@inecsa.com

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!