COMPLIANT - Brass Craft
COMPLIANT - Brass Craft
COMPLIANT - Brass Craft
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
64TECHNICAL DATA SHEETTechnical Product Data SheetWATER SUPPLY STOPS – 1/4 TURN G2 PUSHCONNECT STOPUse: For use in potable water distribution systems. Not intended for recirculating systems that produce continuous usetemperatures above 115° F. For those applications, use <strong>Brass</strong><strong>Craft</strong>’s KT series ball stopDesign Features: Compatible with PEX, Copper and CPVC Dual O-rings. Viton* and Nitrile o-rings both providechemical resistance; the Viton* o-ring adds heatresistance & the Nitrile o-ring abrasion resistance Pre-inserted tube stiffener is “installation ready” for afaster connection Locking clip adds security to connection while allowingremoval if needed Captive removal flange permits easy removal from tube One-Piece shut-off mechanism provides smooth on-off operationwithout freeze ups even after long periods of non-use Positive 1/4 turn shut-off Easy-to-remove handle protects against accidental operation during rough-ins 100% leak tested Compliant stops availableSPECIFICATIONSOperating Specifications:Temperature: 40° - 140° FPressure: 125 PSI maximumStandard PushConnectCompliant PushConnectMATERIAL SPECIFICATIONSMATERIAL SPECIFICATIONSValve Body <strong>Brass</strong> Valve Body Compliant <strong>Brass</strong>Stem Barrel Santoprene Stem Barrel SantopreneStem Shaft Glass-filled Polypropylene Stem Shaft Glass-filled PolypropyleneStem O-ring EPDM Stem O-ring EPDMGripper Ring Stainless Steel Gripper Ring Stainless SteelPushConnect O-rings Viton* & Nitrile PushConnect O-rings Viton* & NitrileTube Stiffener Stainless Steel Tube Stiffener Stainless SteelLocking Clip Nylon Locking Clip NylonRemoval Flange Glass-filled Nylon Removal Flange Glass-filled NylonHandle Chrome-plated Zinc Die Cast Handle Chrome-plated Zinc Die CastHandle Screw Zinc-plated Steel Handle Screw Zinc-plated steelCompression Sleeve <strong>Brass</strong> Compression Sleeve <strong>Brass</strong>Compression Nut Chrome-plated <strong>Brass</strong> Compression Nut Chrome-plated <strong>Brass</strong>*Viton is a registered trademark of DuPont Dow Elastomers, L.L.C.Listings & Certifications: IAPMO listed to ASME A112.18.1-05 / CSA B125.1-05 and ASSE 1061 (File # 0645) CSA listed to ASME A112.18.1-05 / CSA B125.1-05 and ASSE 1061 (File # 204593) Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 (Project # 2174785) and Maryland House Bill 372 (Project # 2174785)
Change language