5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
5th International Powder Metallurgy Conference will take place at ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 th <strong>Intern<strong>at</strong>ional</strong> <strong>Powder</strong> <strong>Metallurgy</strong> <strong>Conference</strong> <strong>will</strong> <strong>take</strong> <strong>place</strong> <strong>at</strong> Congress Center of<br />
TOBB University of Economics and Technology on October 08-12, 2008. 260 abstracts were<br />
submitted, out of which 110 oral and 50 poster present<strong>at</strong>ions are accepted according to<br />
the referee reports, by the Organizing Committee. In parallel to the technical sessions, 18<br />
intern<strong>at</strong>ional and n<strong>at</strong>ional PM parts and equipment producing companies <strong>will</strong> be exhibiting<br />
their products. 250 deleg<strong>at</strong>es are expected to be registered to the conference.<br />
As in the previous four <strong>Powder</strong> <strong>Metallurgy</strong> <strong>Conference</strong>s (1996, 1999, 2002 and 2005) organized<br />
by Turkish PM Associ<strong>at</strong>ion, there are plenary invited lectures. Professor Randall German<br />
of San Diego St<strong>at</strong>e University <strong>will</strong> be lecturing on “Light Metals Research and Barriers for<br />
Automotive Applic<strong>at</strong>ions”. Ingo Cremer, President of European PM Associ<strong>at</strong>ion and Professor<br />
Süleyman Sarıtaş, President of Turkish PM Associ<strong>at</strong>ion, <strong>will</strong> be lecturing on “PM in Europe”<br />
and “PM in Turkey” successively.<br />
<strong>Conference</strong> Secretari<strong>at</strong>:<br />
Assoc. Prof. Dr. Mustafa ÜBEYLİ,<br />
TOBB University of Economics and Technology<br />
Department of Mechanical Engineering,<br />
Söğütözü Cad. No.43, Ankara, 06560, Türkiye.<br />
Tel: +90-312-292 4085, Fax: +90-312-292 40 91<br />
E-mail: mubeyli@etu.edu.tr<br />
Turkish <strong>Powder</strong> <strong>Metallurgy</strong> Associ<strong>at</strong>ion:<br />
Prof. Dr. Süleyman SARITAŞ,<br />
TOBB University of Economics and Technology<br />
Department of Mechanical Engineering,<br />
Söğütözü Cad. No.43, Ankara, 06560, Türkiye.<br />
Tel: +90-312-292 4061, Fax: +90-312-292 40 91<br />
E-mail: ssaritas@etu.edu.tr
CONFERENCE LOCATION: <strong>Conference</strong> <strong>will</strong> <strong>take</strong> <strong>place</strong> <strong>at</strong> Congress Center of TOBB University of Economics and Technology.<br />
REGISTRATION:<br />
<strong>Conference</strong> Deleg<strong>at</strong>e Registr<strong>at</strong>ion: Registr<strong>at</strong>ion <strong>will</strong> start <strong>at</strong> 05.00 pm on Tuesday 07 October and <strong>will</strong> continue during the<br />
technical sessions on October 08-10, 2008 in the Congress Center. Registr<strong>at</strong>ion fee is € 200 for all deleg<strong>at</strong>es and € 50 for<br />
students. This fee covers conference bag, conference proceedings CD, printing charges of the journal M<strong>at</strong>erials Science<br />
Forum and tickets for the lunches. Tea and coffee <strong>will</strong> be served free of charge during the breaks.<br />
<strong>Conference</strong> Exhibition Registr<strong>at</strong>ion: <strong>Conference</strong> exhibition <strong>will</strong> be organized in booths prepared by a professional fair<br />
organizing firm. Registr<strong>at</strong>ion fee is $ 1500 or € 1000. Firms intending to <strong>at</strong>tend the exhibition should contact Turkish<br />
<strong>Powder</strong> <strong>Metallurgy</strong> Associ<strong>at</strong>ion as soon as possible for alloc<strong>at</strong>ion of a booth loc<strong>at</strong>ion.<br />
CONFERENCE PROCEEDINGS: Papers presented as oral or poster during the conference <strong>will</strong> be l<strong>at</strong>er printed in the proceeding<br />
CD. Refereed and selected papers in English <strong>will</strong> also be printed in the journal M<strong>at</strong>erials Science Forum. <strong>Conference</strong><br />
proceeding CD <strong>will</strong> be posted to each deleg<strong>at</strong>e who had registered to the conference.<br />
TRANSPORTATION: Congress Center of TOBB University of Economics and Technology (TOBB ETU) is suitable loc<strong>at</strong>ed near<br />
the city center of Ankara. Service buses of TOBB ETU are free and ready to collect conference deleg<strong>at</strong>es. TOBB ETU service<br />
buses pass in front of Ankaray Bahçelievler St<strong>at</strong>ion, AŞTİ Intercity Bus St<strong>at</strong>ion and Armada Shopping Center.<br />
Arriving to Ankara by train: Ankara Intercity Train St<strong>at</strong>ion (GAR) is linked by an underground passage about 200m to the<br />
Ankaray line. Take Ankaray line towards AŞTİ. Get out of AŞTİ and <strong>take</strong> TOBB ETU service buses.<br />
Arriving to Ankara by bus: Get out of AŞTİ and <strong>take</strong> TOBB ETU service buses.<br />
Arriving to Ankara by airplane: Take HAVAŞ buses from Ankara-Esenboğa Airport and <strong>take</strong> off <strong>at</strong> AŞTİ (last stop). Get out<br />
of AŞTİ and <strong>take</strong> TOBB ETU service buses. Esenboğa is an intern<strong>at</strong>ional airport and there are scheduled flights every hour<br />
on every day from İstanbul to Ankara.<br />
LUNCH: All registered deleg<strong>at</strong>es <strong>will</strong> have lunches free of charges.<br />
CONFERENCE COCKTAIL AND CONFERENCE DINNER: There <strong>will</strong> be an<br />
organized PM factory tour and the conference cocktail <strong>will</strong> <strong>take</strong> <strong>place</strong> <strong>at</strong> the<br />
factory on the evening of Wednesday 08 October. <strong>Conference</strong> dinner <strong>will</strong><br />
<strong>take</strong> <strong>place</strong> <strong>at</strong> TOBB ETU Congress Center on Thursday 09 October. Tickets<br />
for these events <strong>will</strong> be supplied during the conference registr<strong>at</strong>ion.<br />
CITY TOURS: For accompanying persons and the interested deleg<strong>at</strong>es there<br />
<strong>will</strong> be organized city tours. Travel is free but the visitors <strong>will</strong> be paying<br />
the museum entrance fees.<br />
ACCOMMODATION: For the conference deleg<strong>at</strong>es, reserv<strong>at</strong>ions had been<br />
carried out <strong>at</strong> the hotels listed in Accommod<strong>at</strong>ion Form. Those asking for<br />
an accommod<strong>at</strong>ion should fill the Accommod<strong>at</strong>ion Form and send it as<br />
fast as possible to the given fax number or e-mail address.<br />
CAPPADOCIA AND BEYPAZARI TOURS<br />
Two tours to Cappadocia and Beypazarı <strong>will</strong> be organized on 11-12 October. Cappadocia tour <strong>will</strong> be a two days tour and<br />
Beypazarı <strong>will</strong> be a daily tour. At least 20 deleg<strong>at</strong>es should register for each tour. Final decisions for the tours <strong>will</strong> be <strong>take</strong>n<br />
during the conference.<br />
Cappadocia: Tour includes Ihlara Valley, Ürgüp, Göreme, Zelve, Avanos and Kaymaklı underground city. One night <strong>will</strong> be<br />
spent in the region in a 3* hotel. The fee for the tour is €150.<br />
Beypazarı: A daily tour to Beypazarı town <strong>will</strong> include visiting the historical houses and Hıdırlık Hill. Lunch <strong>will</strong> be served <strong>at</strong><br />
Taşmektep and guests <strong>will</strong> be free for shopping and visiting silver shops. The fee for the tour is €50.<br />
OTHER FACILITIES: TOBB ETU is <strong>at</strong> walking distance to the Armada Shopping Center where banks, restaurants, cafes,<br />
supermarkets and all sorts of shops are present.<br />
CORRESPONDENCE: All correspondence should be carried out with the <strong>Conference</strong> Secretari<strong>at</strong>. Turkish <strong>Powder</strong> <strong>Metallurgy</strong><br />
Associ<strong>at</strong>ion is also <strong>at</strong> the same address.
PROGRAM<br />
08 October 2008<br />
09:00-10:30 Registr<strong>at</strong>ion Registr<strong>at</strong>ion Desk<br />
10:30-12:00 Opening Ceremony Hall A<br />
12:00-13:30 Lunch Sultan Restaurant<br />
13:30-14:15 Invited lecture Hall A<br />
14:15-14:30 Tea break Hall A Hall B Hall C<br />
14:30-14:50<br />
18<br />
150<br />
50<br />
14:50-15:10<br />
15:10-15:30<br />
Technical Sessions<br />
85<br />
221<br />
160<br />
125<br />
176<br />
261<br />
15:30-15:50 222 256 49<br />
15:50-19:00 Technical Trip and <strong>Conference</strong> Cocktail<br />
09 October 2008<br />
09:00-09:20<br />
14<br />
31<br />
52<br />
09:20-09:40<br />
09:40-10:00<br />
Technical Sessions<br />
34<br />
205<br />
139<br />
142<br />
95<br />
115<br />
10:00-10:20 241 161 147<br />
10:20-10:40 Tea break Hall A Hall B Hall C<br />
10:40-11:00<br />
67<br />
29<br />
210<br />
11:00-11:20<br />
11:20-11:40<br />
Technical Sessions<br />
72<br />
82<br />
51<br />
43<br />
217<br />
223<br />
11:40-12:00 149 108 249<br />
12:00-13:30 Lunch Sultan Restaurant<br />
13:30-14:15 Invited lecture Hall A<br />
14:15-14:30 Tea break Hall A Hall B Hall C<br />
14:30-14:50<br />
92<br />
258<br />
170<br />
14:50-15:10<br />
15:10-15:30<br />
Technical Sessions<br />
117<br />
182<br />
53<br />
66<br />
229<br />
225<br />
15:30-15:50 94 84<br />
15:50-16:10 Tea break Hall A Hall B Hall C<br />
16:10-16:30<br />
188<br />
111<br />
239<br />
16:30-16:50<br />
16:50-17:10<br />
Technical Sessions<br />
198<br />
200<br />
129<br />
231<br />
63<br />
55<br />
17:10-17:30 169 252 260<br />
20:00-23:00 <strong>Conference</strong> Dinner<br />
10 October 2008<br />
09:00-09:20<br />
64<br />
30<br />
109<br />
09:20-09:40<br />
09:40-10:00<br />
Technical Sessions<br />
132<br />
168<br />
25<br />
106<br />
110<br />
230<br />
10:00-10:20 172 254 144<br />
10:20-10:40 Tea break Hall A Hall B Hall C<br />
10:40-11:00<br />
87<br />
28<br />
195<br />
11:00-11:20<br />
11:20-11:40<br />
Technical Sessions<br />
100<br />
246<br />
65<br />
248<br />
240<br />
220<br />
11:40-12:00 259 105<br />
12:00-13:30 Lunch Sultan Restaurant<br />
13:30-14:15 Invited lecture Hall A<br />
14:15-14:30 Tea break Hall A Hall B Hall C<br />
14:30-14:50<br />
173<br />
48<br />
152<br />
14:50-15:10<br />
15:10-15:30<br />
Technical Sessions<br />
183<br />
190<br />
257<br />
191<br />
154<br />
42<br />
15:30-15:50 201 184 174<br />
15:50-16:10 Tea break Hall A Hall B Hall C<br />
16:10-16:30<br />
16:30-16:50<br />
Technical Sessions<br />
232<br />
57<br />
197<br />
119<br />
185<br />
186<br />
16:50-17:10 211 128 91<br />
17:10-17:30 204 214<br />
Session<br />
01<br />
Session<br />
04<br />
Session<br />
07<br />
Session<br />
10<br />
Session<br />
13<br />
Session<br />
16<br />
Session<br />
19<br />
Session<br />
22<br />
Session<br />
25<br />
1<br />
Session<br />
02<br />
Session<br />
05<br />
Session<br />
08<br />
Session<br />
11<br />
Session<br />
14<br />
Session<br />
17<br />
Session<br />
20<br />
Session<br />
23<br />
Session<br />
26<br />
Session<br />
03<br />
Session<br />
06<br />
Session<br />
09<br />
Session<br />
12<br />
Session<br />
15<br />
Session<br />
18<br />
Session<br />
21<br />
Session<br />
24<br />
Session<br />
27
5 th INTERNATIONAL POWDER METALLURGY CONFERENCE<br />
TURKISH<br />
POWDER METALLURGY<br />
ASSOCIATION<br />
ORGANIZING COMMITTEE<br />
İlhan AKSAY USA<br />
Abolghasem ARVAND IRAN<br />
Ingo CREMER GERMANY<br />
Herbert DANNINGER AUSTRIA<br />
Ali ERDEMİR USA<br />
Sergei FIRSTOV UKRAINE<br />
Zoltan GACSI HUNGARY<br />
Randall M. GERMAN USA<br />
Osman T. İNAL USA<br />
W. Brian JAMES USA<br />
Shinhoo KANG KOREA<br />
Muammer KOÇ USA<br />
Hidenori KUROKI JAPAN<br />
Alan LAWLEY USA<br />
Gilles L’ESPERANCE CANADA<br />
Arif MAMEDOV AZERBAIJAN<br />
Hideshi MIURA JAPAN<br />
Cesar B. MOLINS SPAIN<br />
S. Farag MOUSTAFA EGYPT<br />
Radu L. ORBAN ROMANIA<br />
Henri PASTOR FRANCE<br />
Frank PEDZOLT GERMANY<br />
Tadeusz PIECZONKA POLAND<br />
P. RAMAKRISHNAN INDIA<br />
Mario ROSSO ITALY<br />
M<strong>at</strong> Husin SALAH MALAYSIA<br />
Andrej SALAK SLOVAKIA<br />
S.M. SCHEICHALIEV RUSSIA<br />
Çetin M. SONSINO GERMANY<br />
Marin STOYTCHEV BULGARIA<br />
Jan TENGZELIUS SWEDEN<br />
Mustafa E. UYGUR SAUDI ARABIA<br />
Ali ÜNAL USA<br />
John V. WOOD UK<br />
Zhiqiang ZOU CHINA<br />
ORGANIZED BY<br />
TURKISH POWDER METALLURGY ASSOCIATION<br />
TOBB UNIVERSITY OF ECONOMICS AND TECHNOLOGY<br />
Süleyman SARITAŞ TOBB ETU Mehmet TÜRKER GAZİ UNIVERSITY<br />
Nuri DURLU TOBB ETU Adem KURT GAZİ UNIVERSITY<br />
Mustafa ÜBEYLİ TOBB ETU Halil İbrahim ASLAN GAZİ UNIVERSITY<br />
Necip CAMUŞCU TOBB ETU İbrahim USLAN GAZİ UNIVERSITY<br />
Mehmet Ali GÜLER TOBB ETU Çetin KARATAŞ GAZİ UNIVERSITY<br />
Teyfik DEMİR TOBB ETU Yusuf USTA GAZİ UNIVERSITY<br />
INTERNATIONAL ADVISORY COMMITTEE<br />
2<br />
TECHNICAL COMMITTEE<br />
TOBB<br />
UNIVERSITY OF<br />
ECONOMICS AND TECHNOLOGY<br />
Mustafa AKSOY FIRAT UNIVERSITY<br />
Mehmet ALKAN ALKAN MAKİNA<br />
Tamer APAYDIN POLMAK<br />
Fazlı ARSLAN KTU<br />
Recep ARTIR MARMARA UNIVERSITY<br />
Emrah AYDOĞAN SONMAK<br />
Tarık BAYKARA TÜBİTAK- MAM<br />
Cuma BİNDAL SAKARYA UNIVERSITY<br />
Memduh BİRBİLEN KALEPORSELEN<br />
Nej<strong>at</strong> ÇANKAYA BÖHLER<br />
Naşit ÇİNER ALSER<br />
Cengiz DOĞAN HARRAN UNIVERSITY<br />
Cihangir DURAN GYTE<br />
Abdulkadir EKŞİ ÇUKUROVA UNIVERSITY<br />
Şerafettin EROĞLU İSTANBUL UNIVERSITY<br />
Fehim FINDIK SAKARYA UNIVERSITY<br />
Metin GÖBÜLÜK METİN OTOMOTİV<br />
Aydın GÖKTAŞ ÇANAKKALE SERAMİK<br />
Özkan GÜLSOY MARMARA UNIVERSITY<br />
Adil GÜREL GÜREL MAKİNA<br />
Ali KALKANLI METU<br />
Şadi KARAGÖZ KOCAELİ UNIVERSITY<br />
Baki KARAMIŞ ERCİYES UNIVERSITY<br />
Hasan MANDAL ANADOLU UNIVERSITY<br />
Bilgehan ÖGEL METU<br />
Lütfi ÖVEÇOĞLU ITU<br />
Mehmet ÖZDEŞLİK SİSTEM TEKNİK<br />
Hüsnü ÖZDURAL TOZMETAL<br />
Ahmet SİNA SİTA<br />
Olgun TANBERK SİNTER METAL<br />
Agah UĞUZ ULUDAĞ UNIVERSITY<br />
A. Hikmet ÜÇIŞIK BOĞAZİÇİ UNIVERSITY<br />
Rahmi ÜNAL DUMLUPINAR UNIVERSITY<br />
Arman ÜTÜCÜYAN SİNTEK<br />
Remzi VAROL S. DEMİREL UNIVERSITY<br />
Tarık YELKİKANAT KANAT SANAYİ<br />
Fevzi YILMAZ SAKARYA UNIVERSITY
08 October 2008<br />
Invited Lecture / HALL A / 13:30-14:15<br />
INGO CREMER, President of EPMA, “PM IN EUROPE”<br />
Session 01 Modeling<br />
Azerbaijan<br />
Paper ID: 18 Hall A 14:30-14:50<br />
ARİF MAMEDOV and VUGAR MAMEDOV<br />
Azerbaijan Technical University<br />
“PHENOMENOLOGICAL APPROACH TO<br />
THE PLASTIC DEFORMATION OF METALLIC<br />
POWDERS IN CONFINED CAVITY”<br />
India<br />
Paper ID: 85 Hall A 14:50-15:10<br />
D.DAS, G.SUTRADHAR, and S.KUMAR<br />
C & W Workshop, Eastern Railway, Jadavpur<br />
University, BIT Mesra.<br />
“OPTIMISATION OF PROCESS PARAMETERS<br />
FOR COPPER INFILTRATED JOURNAL BEARING<br />
BASED ON FUZZY MODEL”<br />
Türkiye<br />
Paper ID: 221 Hall A 15:10-15:30<br />
ÖZER AYDIN and RAHMİ ÜNAL<br />
Dumlupınar University<br />
“GAS ATOMIZER NOZZLE DESIGN BY<br />
COMPUTATIONAL FLUID DYNAMICS”<br />
Türkiye<br />
Paper ID: 222 Hall A 15:30-15:50<br />
D. UZUNSOY, I.T.H. CHANG and E. UZUNSOY<br />
Yıldız Technical University and The University<br />
of Birmingham<br />
“PREDICTION OF THE EFFECT OF INFILTRATION<br />
CONDITIONS ON POROSITY OF SELECTIVE<br />
LASER SINTERED (SLS) STAINLESS STEEL<br />
PREFORM USING ANFIS”<br />
Session 02 Applic<strong>at</strong>ions<br />
USA<br />
Paper ID: 150 Hall B 14:30-14:50<br />
OSMAN T. İNAL, PETER F. GERITY and DANIEL<br />
H. LOPEZ<br />
New Mexico Institute of Mining and<br />
Technology<br />
“EXPLOSIVE CONSOLIDATION OF METAL<br />
(ALLOY), CERAMIC AND CERMET POWDERS”<br />
3<br />
Germany<br />
Paper ID: 160 Hall B 14:50-15:10<br />
HUBERT PLANK<br />
DORST Technologies<br />
“FLEXIBILITY, PRECISION, PERFORMANCE”<br />
Romania<br />
Paper ID: 125 Hall B 15:10-15:30<br />
MARIANA LUCACI, RADU LIVIU ORBAN, JANA<br />
PINTEA and VIOLETA TSAKIRIS<br />
R&D N<strong>at</strong>ional Institute for Electrical<br />
Engineering INCDIE ICPE-CA and Technical<br />
University of Cluj Napoca<br />
“Fe AND Co ALLOYED NiAl POWDERS FOR<br />
SENSOR APPLICATIONS”<br />
India<br />
Paper ID: 256 Hall B 15:30-15:50<br />
SUDIP MONDAL, SHRABANI MAHATA,<br />
SUSMITA KUNDU and BISWANATH MONDAL<br />
Centre for Advanced M<strong>at</strong>erial Processing and<br />
Central Mechanical Engineering Research<br />
Institute<br />
“DEVELOPMENT OF BIOCOMPATIBLE<br />
SINTERABLE HYDROXYAPATITE MATERIALS<br />
FROM FISH SCALE”<br />
Session 03 Secondary Oper<strong>at</strong>ions<br />
Türkiye<br />
Paper ID: 50 Hall C 14:30-14:50<br />
SELİM SARPER YILMAZ, BEKİR SADIK ÜNLÜ,<br />
REMZİ VAROL<br />
Celal Bayar University and Süleyman Demirel<br />
University<br />
“EFFECT OF BORONIZING AND SHOT<br />
PEENING ON WEAR, MICROSTRUCTURE AND<br />
MECHANICAL PROPERTIES OF FERROUS BASED<br />
FeCu-GRAPHITE PMMATERIAL”
Türkiye<br />
Paper ID: 176 Hall C 14:50-15:10<br />
MUSTAFA GÜNAY, İBRAHİM ÇİFTÇİ and ULVİ<br />
ŞEKER<br />
Gazi University and Karabük University<br />
“EVALUATION OF CUTTING TOOL<br />
PERFORMANCE WHEN MACHINING SiC / P<br />
Al-Si COMPOSITES PRODUCED BY POWDER<br />
METALLURGY”<br />
09 October 2008<br />
Invited Lecture / HALL A / 13:30-14:15<br />
RANDALL M. GERMAN, San Diego St<strong>at</strong>e University<br />
“LIGHT METALS RESEARCH AND BARRIERS FOR AUTOMOTIVE APPLICATIONS”<br />
Session 04 Forming Processes<br />
Türkiye<br />
Paper ID: 14 Hall A 09:00-09:20<br />
MUSTAFA GÜDEN and SİNAN YÜKSEL<br />
İzmir Institute of Technology<br />
“EFFECT OF SiC PARTICLE ADDITION ON<br />
THE EXPANSION OF ALUMINUM POWDER<br />
COMPACTS IN THE FOAMING POWDER<br />
COMPACT PROCESS”<br />
Poland<br />
Paper ID: 34 Hall A 09:20-09:40<br />
JANUSZ KONSTANTY, DOROTA TYRAŁA,<br />
AGNIESZKA RADZISZEWSKA and WIKTORIA<br />
RATUSZEK<br />
AGH - University of Science and Technology<br />
“PROPERTIES OF IRON-BASE MATERIALS<br />
MANUFACTURED FROM PREMIXED POWDERS<br />
BY THE HOT PRESS PROCESS”<br />
Türkiye<br />
4<br />
Türkiye<br />
Paper ID: 261 Hall C 15:10-15:30<br />
FEVZİ, YILMAZ, FATİH ÜSTEL ve ÖZGÜR<br />
CEVHER<br />
Sakarya University<br />
“TERMAL PÜSKÜRTME KAPLAMA SEKTÖRÜ –<br />
GELİŞMELER, GÖRÜŞLER”<br />
Paper ID: 49 Hall C 15:30-15:50<br />
BEKİR SADIK ÜNLÜ, SELİM SARPER YILMAZ and REMZİ VAROL<br />
Celal Bayar University and Süleyman Demirel University<br />
“TRIBOLOGICAL PROPERTIES OF BORONIZED FERROUS BASED PM JOURNAL BEARINGS”<br />
Hungary<br />
Paper ID: 205 Hall A 09:40-10:00<br />
ANDREA MAKSZIMUS, C. HAKAN GÜR,<br />
TADEUSZ PIECZONKA, EVREN TAN and<br />
ZOLTAN GACSI<br />
Institute of M<strong>at</strong>erials Sciences, Univ. of<br />
Miskolc, Miskolc-Egyetemvaros, Metallurgical<br />
& M<strong>at</strong>erials Eng. Dept., Middle East Technical<br />
Univ., AGH Univ. of Science and Technology<br />
“COMPARISON OF THE MICROSTRUCTURE AND<br />
THE MECHANICAL PROPERTIES OF HOT- AND<br />
COLD-PRESSED Al-SiC COMPOSITES“<br />
P<br />
Australia<br />
Paper ID: 241 Hall A 10:00-10:20<br />
NIGEL STONE, DELPHINE CANTIN, MARK<br />
GIBSON, SRI LATHABAI, DAVID RITCHIE,<br />
ROBERT WILSON, MERCHANT YOUSUFF, RAJ.<br />
RAJAKUMAR and KEVIN ROGERS<br />
CSIRO Light Metals Flagship: M<strong>at</strong>erials Science<br />
& Engineering<br />
“A CONTINUOUS PROCESS FOR PRODUCTION<br />
OF C TITANIUM SHEET BY DIRECT POWDER<br />
P<br />
ROLLING”
Session 05 Secondary Oper<strong>at</strong>ions<br />
Türkiye<br />
Paper ID: 31 Hall B 09:00-09:20<br />
MEHTAP MURATOĞLU<br />
Fır<strong>at</strong> University<br />
“2124 Al -Ni Al METAL MATRİSLİ KOMPOZİTİN<br />
3<br />
KURU KAYMA AŞINMA DAVRANIŞLARININ<br />
ARAŞTIRILMASI”<br />
Türkiye<br />
Paper ID: 139 Hall B 09:20-09:40<br />
FIRAT KAFKAS, ÇETİN KARATAŞ and<br />
SÜLEYMAN SARITAŞ<br />
Gazi University and TOBB University of<br />
Economics and Technology<br />
“EFFECT OF HEAT TREATMENT CONDITIONS<br />
ON RESIDUAL STRESSES OCCURRING IN PM<br />
STEELS”<br />
Türkiye<br />
Paper ID: 142 Hall B 09:40-10:00<br />
MEHMET ERDEM and MEHMET TÜRKER<br />
İncirli Technical and Voc<strong>at</strong>ional High School<br />
and Gazi University<br />
“EFFECT OF DEFORMATION RATE AND<br />
TEMPERATURE ON THE SECONDARY<br />
RECRYSTALISATION BEHAVIOUR AND<br />
MECHANICAL PROPERTIES OF A NICKEL BASED<br />
SUPERALLOY”<br />
Türkiye<br />
Paper ID: 161 Hall A 10:00-10:20<br />
H. İBRAHİM ÜNAL, ÖZLEM EROL and ÇETİN<br />
KARATAŞ<br />
Gazi University<br />
“INVESTIGATION OF ELECTRORHEOLOGICAL<br />
PROPERTIES OF ORGANO-MONTMORILLONITE<br />
POWDER”<br />
Session 06 Composites (in Turkish)<br />
Türkiye<br />
Paper ID: 52 Hall C 09:00-09:20<br />
NACİ KURGAN, BEKİR SADIK ÜNLÜ, SELİM<br />
SARPER YILMAZ, REMZİ VAROL<br />
Ereğli Demir Çelik İşletmeleri, Celal Bayar<br />
University, Turgutlu Voc<strong>at</strong>ional High School<br />
and Süleyman Demirel University<br />
“TOZ METAL PASLANMAZ ÇELİK İMPLANT<br />
MALZEMELERİN ÜRETİMİ VE MEKANİK<br />
ÖZELLİKLERİ”<br />
5<br />
Türkiye<br />
Paper ID: 95 Hall C 09:20-09:40<br />
B. AKTAŞ, S. TEKELİ, G. KÜPELİ, H.Ö. GÜLSOY,<br />
S. SALMAN<br />
Marmara University, Gazi University, Center<br />
for Advanced Vehicular Systems, Mississippi<br />
St<strong>at</strong>e University and School of M<strong>at</strong>erials<br />
Science and Engineering, GATECH<br />
“ELEKTROLİT MALZEME OLARAK KULLANILAN<br />
KÜBİK ZİRKONYA (YSZ) SERAMİKLERİNE CaO<br />
İLAVESİ İLE TANE SINIRI İLETKENLİĞİNİN<br />
GELİŞTİRİLMESİ”<br />
Türkiye<br />
Paper ID: 115 Hall C 09:40-10:00<br />
EDİZ ERCENK, H. ÖZKAN TOPLAN, ŞENOL<br />
YILMAZ, VOLKAN GÜNAY<br />
Sakarya University and TÜBİTAK-MAM<br />
“ZnO-%6 Bi O SERAMİK SİSTEMİNİN<br />
2 3<br />
MİKROYAPISAL ÖZELLİKLERİNE SrO KATKISININ<br />
ETKİSİ”<br />
Türkiye<br />
Paper ID: 147 Hall C 10:00-10:20<br />
A. EROL, D. AKIN ve A. YÖNETKEN<br />
Afyon Koc<strong>at</strong>epe University<br />
“KİMYASAL METODLA NİKEL KAPLANMIŞ BOR<br />
MİNERALİ TOZLARI KULLANILARAK KOMPOZİT<br />
MALZEME ÜRETİMİ ve ÖZELLİKLERİNİN<br />
İNCELENMESİ”<br />
Session 07 Composites<br />
Poland<br />
Paper ID: 67 Hall A 10:40-11:00<br />
ANDRZEJ ROMANSKI, JAN LACHOWSKI<br />
AGH-University of Science and Technology,<br />
Kielce University of Technology<br />
“EFFECT OF FRICTION COEFFICIENT AND<br />
MECHANICAL PROPERTIES OF THE MATRIX ON<br />
ITS DIAMOND RETENTION CAPABILITIES”<br />
Türkiye<br />
Paper ID: 72 Hall A 11:00-11:20<br />
MUSTAFA AYDIN and AYHAN ÜRER<br />
Dumlupınar University<br />
“THE TRIBOLOGICAL PROPERTIES OF PURE<br />
MAGNESIUM MATRIX COMPOSITE DISPERSED<br />
WITH Mg Si”<br />
2
Türkiye<br />
Paper ID: 82 Hall A 11:20-11:40<br />
NİHAN TUNCER, BAŞAK TAŞDELEN and<br />
GÜRSOY ARSLAN<br />
Anadolu University<br />
“EFFECT OF PASSIVATION AND PRECIPITATION<br />
HARDENING ON PROCESSING AND<br />
MECHANICAL PROPERTIES OF B C – Al<br />
4<br />
COMPOSITES”<br />
USA<br />
Paper ID: 149 Hall A 11:40-12:00<br />
YUSUF USTA, N.ÖMER CORA, MUAMMER KOÇ<br />
Virginia Commonwealth University<br />
“HOT COMPACTION OF MICRO/MESO-<br />
SCALE POROUS SURFACE FEATURES FOR<br />
ENHANCED HEAT TRANSFER APPLICATIONS-<br />
INVESTIGATIONS ON THE EFFECT OF POWDER<br />
SIZE ON POROSITY CONTROL”<br />
Session 08 Secondary Oper<strong>at</strong>ions<br />
(in Turkish)<br />
Türkiye<br />
Paper ID: 29 Hall B 10:40-11:00<br />
AYHAN EROL, ŞÜKRÜ TALAŞ, AHMET<br />
YÖNETKEN and M. ÇAKMAKKAYA<br />
Afyon Koc<strong>at</strong>epe University<br />
“WC-Ni SERAMİK METAL KOMPOZİT MALZEME<br />
ÇİFTLERİNİN DİFÜZYON KAYNAĞI İLE<br />
KAYNAKLANABİLİRLİĞİNİN ARAŞTIRILMASI”<br />
Türkiye<br />
Paper ID: 51 Hall B 11:00-11:20<br />
BEKİR SADIK ÜNLÜ, SELİM SARPER YILMAZ,<br />
CEVDET MERİÇ, MESUT TOKDEMİR, ONUR<br />
ELEKTRİKÇİ<br />
Celal Bayar University, F<strong>at</strong>ih University<br />
“TIG VE LAZER KAYNAĞI İLE BİRLEŞTİRİLMİŞ<br />
DEMİR ESASLI TOZ METAL MALZEMELERDE<br />
KAYNAK BÖLGESİNİN MEKANİK<br />
ÖZELLİKLERİNİN KARŞILAŞTIRILMASI”<br />
Türkiye<br />
Paper ID: 43 Hall B 11:20-11:40<br />
HASAN HASIRCI, HAYRETTİN AHLATÇI,<br />
FERHAT GÜL<br />
Gazi University and Karabük University<br />
“B C /Al KOMPOZİTLERİN TAKVİYE HACİM<br />
4<br />
ORANINA BAĞLI OLARAK ADHESİF AŞINMA<br />
DAVRANIŞLARINDAKİ DEĞİŞİMLERİN<br />
İNCELENMESİ”<br />
6<br />
Türkiye<br />
Paper ID: 108 Hall B 11:40-12:00<br />
HALİL İ. BAKAN<br />
TÜBİTAK-MAM<br />
“Ti-6Al-4V ESASLI METALİK KÖPÜKLERİN TOZ<br />
METALURJİSİ YÖNTEMLERİ İLE ÜRETİMİ”<br />
Session 09 Characteriz<strong>at</strong>ion of<br />
<strong>Powder</strong>s and Parts<br />
Iran<br />
Paper ID: 210 Hall C 10:40-11:00<br />
MAZIYAR AZADBEH and MARYAM ABBASI<br />
Sahand University of Technology<br />
“EFFECT OF MANUFACTURING PARAMETERS ON<br />
PHASE GROWTH AND HOMOGENIZATION OF A<br />
PM Al/Ni 3 Al COMPOSITE”<br />
Romania<br />
Paper ID: 217 Hall C 11:00-11:20<br />
VIRGILIU PRICA, RADU MURESAN, GEORGE<br />
ARGHIR, MARIUS BODEA and DANA SALOMIE<br />
Technical University of Cluj-Napoca<br />
“THE CHARACTERIZATION OF Fe30Cu70 POWDER<br />
OBTAINED BY MECHANICAL ALLOYING”<br />
Türkiye<br />
Paper ID: 223 Hall C 11:20-11:40<br />
HASAN GÖKÇE, ZEYNEP KEÇELİ, TAHSİN<br />
BOYRAZ, CENGİZ HAMZAÇEBİ and M. LÜTFİ<br />
ÖVEÇOĞLU<br />
Istanbul Technical University, Ford Otosan<br />
Otomotiv Sanayi A.S. and Cumhuriyet University<br />
“THERMAL SHOCK PROPERTIES OF ALUMINIUM<br />
TITANATE-CORDIERITE CERAMICS PRODUCED BY<br />
PMMETHOD”<br />
Türkiye<br />
Paper ID: 249 Hall C 11:40-12:00<br />
RAMAZAN KARSLIOĞLU, MEHMET UYSAL,<br />
AHMET ALP and HATEM AKBULUT<br />
Sakarya University<br />
“CURRENT ACTIVATED SINTERING OF BRONZE<br />
HYBRID MMCs COATINGS ON STEEL SUBSTRATES”<br />
Session 10 Composites<br />
USA<br />
Paper ID: 92 Hall A 14:30-14:50<br />
AVIJIT MONDAL, ANISH UPADHYAYA and<br />
DINESH AGRAWAL<br />
Indian Institute of Technology and The<br />
Pennsylvania St<strong>at</strong>e University<br />
“A COMPARATIVE STUDY OF DENSIFICATION<br />
AND MICROSTRUCTURAL DEVELOPMENTS IN<br />
W-18Cu COMPOSITIES USING MICROWAVE AND<br />
CONVENTIONAL HEATING”
Türkiye<br />
Paper ID: 117 Hall A 14:50-15:10<br />
AHMET ATASOY<br />
Sakarya University<br />
“THE EFFECT OF NITRIDING CONDITION AND<br />
THE ADDITION OF METALLIC POWDER ON THE<br />
PRODUCTION OF SILICON NITRIDE”<br />
Türkiye<br />
Paper ID: 182 Hall A 15:10-15:30<br />
AZİM GÖKÇE, FEHİM FINDIK, ALİ OSMAN KURT<br />
Sakarya University<br />
“DEVELOPMENT OF HIGH STRENGTH Al-Cu-Mg<br />
POWDER METALLURGY ALLOY“<br />
Session 11 Sintering and Sintering<br />
Atmospheres<br />
Bulgaria<br />
Paper ID: 258 Hall B 14:30-14:50<br />
DIYAN DIMITROV, TADEUSZ PIECZONKA,<br />
SLAVA HARIZANOVA<br />
Technical University of Varna and AGH<br />
University of Science and Technology<br />
“SINTERING BEHAVIOUR OF ASTALOYCRL BASED<br />
POWDER MIXTURES CONTAINING NITRIDED<br />
ASTALOYCRL AND GRAPHITE ADDITIONS”<br />
Germany<br />
Paper ID: 53 Hall B 14:50-15:10<br />
İ. MURAT KUŞOĞLU, K.ONEL, M.WILLERT-<br />
PORADA<br />
Dokuz Eylül University and University of<br />
Bayreuth<br />
“MICROWAVE ASSISTED SINTERING OF IRON<br />
POWDERS”<br />
Poland<br />
Paper ID: 66 Hall B 15:10-15:30<br />
ANDRZEJ ROMANSKI<br />
AGH-University of Science and Technology<br />
“EFFECT OF THE SINTERING PARAMETERS ON THE<br />
MICROSTRUCTURE AND PHASE COMPOSITION OF<br />
THE COBALT-IRON MATERIALS”<br />
Türkiye<br />
Paper ID: 94 Hall B 15:30-15:50<br />
ŞERAFETTİN EROĞLU<br />
TUBITAK-Marmara Research Center<br />
“SINTERING AND MECHANICAL PROPERTIES<br />
OF COLD ISOSTATICALLY PRESSED 92.5%W-<br />
5.25%Ni-2.25%Fe HEAVY ALLOY RODS”<br />
7<br />
Session 12 Mechanical Alloying<br />
Romania<br />
Paper ID: 170 Hall C 14:30-14:50<br />
IOAN PETEAN, GEORGE ARGHIR, LIVIU<br />
BRANDUSAN<br />
Technical University of Cluj-Napoca<br />
“PARTICLE SIZE VERSUS GRAIN SIZE -<br />
COMPARATIVE ANALYSIS ON THE Fe50Co50<br />
MECHANICALLY ALLOYED MIXTURE”<br />
Poland<br />
Paper ID: 229 Hall C 14:50-15:10<br />
MAŁGORZATA GRĄDZKA-DAHLKE<br />
Bialystok Technical University<br />
“CHARACTERISTIC OF THE POROUS 316<br />
STAINLESS STEEL FOR THE SURGICAL IMPLANTS<br />
PRODUCTION”<br />
Türkiye<br />
Paper ID: 225 Hall C 15:10-15:30<br />
HASAN GÖKÇE, A. UMUT SÖYLER, M. LÜTFİ<br />
ÖVEÇOĞLU, BURAK ÖZKAL<br />
Istanbul Technical University<br />
“CHARACTERIZATION OF MICROSTRUCTURAL<br />
AND MECHANICAL PROPERTIES OF WC<br />
AND WC-Co REINFORCED Al METAL MATRIX<br />
COMPOSITES BY MECHANICAL ALLOYING”<br />
Türkiye<br />
Paper ID: 84 Hall C 15:30-15:50<br />
MEHMET ALİ GÜLER, Y. FUAT GÜLVER,<br />
SERKAN DAĞ<br />
TOBB University of Economics and Technology,<br />
Middle East Technical University<br />
“MECHANICAL MODELING OF THIN FILMS<br />
BONDED TO FUNCTIONALLY GRADED<br />
MATERIALS”<br />
Session 13 Composites<br />
Türkiye<br />
Paper ID: 188 Hall A 16:10-16:30<br />
GÖZDE F. ÇELEBİ EFE, İBRAHİM ALTINSOY,<br />
MEDİHA İPEK, SAKİN ZEYTİN, CUMA BİNDAL<br />
Sakarya University<br />
“INVESTIGATION OF SOME PROPERTIES OF SiC<br />
PARTICLE REINFORCED COPPER COMPOSITES”
Hungary<br />
Paper ID: 198 Hall A 16:30-16:50<br />
JUDIT PÁZMÁN, TIBOR FERENCZI, TAMÁS<br />
TÖRÖK, ZOLTÁN GÁCSI<br />
University of Miskolc<br />
“IMPROVING THE INTERFACIAL METAL-<br />
CERAMICS BOND OF METAL MATRIX<br />
COMPOSITES WITH ELECTROLESS NICKEL<br />
PLATING”<br />
Poland<br />
Paper ID: 200 Hall A 16:50-17:10<br />
ANDRZEJ CIAŚ, PIOTR DUDEK and MARIN<br />
STOYTCHEV<br />
AGH -UST University of Mining and<br />
Technology, Bulgarian Academy of Sciences<br />
“MICROSTRUCTURE AND MECHANICAL<br />
PROPERTIES OF FE-2.2Mn-1.5Cr- 0.2Mo- 0.3C<br />
STEEL AS DEVELOPED BY THE POWDER<br />
METALLURGY PROCESS”<br />
Türkiye<br />
Paper ID: 169 Hall A 17:10-17:30<br />
ERTAN EVİN, S. OSMAN YILMAZ, ÖMER GÜLER<br />
Fır<strong>at</strong> University<br />
“PRODUCTION OF Fe-BASED COMPOSITES<br />
REINFORCED WITH IN-SITU SYNTHESIS OF FeTi,<br />
FeB“<br />
Session 14 Sintering and Sintering<br />
Atmospheres<br />
Poland<br />
Paper ID: 111 Hall B 16:10-16:30<br />
TADEUSZ PIECZONKA, ZOLTÁN GACSI and<br />
JAN KAZIOR<br />
AGH - University of Science and Technology,<br />
University of Miskolc and Cracow University of<br />
Technology<br />
“SINTERING BEHAVIOUR OF Al-SiC POWDER<br />
MIXTURES IN DIFFERENT ATMOSPHERES”<br />
Türkiye<br />
Paper ID: 129 Hall B 16:30-16:50<br />
MEHMET KAYA, NURİ ORHAN and GÜL TOSUN<br />
Fır<strong>at</strong> University<br />
“FABRICATION OF POROUS NiTi SHAPE<br />
MEMORY ALLOY AS HOLLOW AND SOLID<br />
CYLINDERS BY SELF-PROPAGATING HIGH-<br />
TEMPERATURE SYNTHESIS.”<br />
8<br />
Romania<br />
Paper ID: 231 Hall B 16:50-17:10<br />
RADU L. ORBAN, MARIANA LUCACI, NICOLAE<br />
JUMATE, MAGDALENA ORBAN, LUISA MITCA-OPREA<br />
Technical University of Cluj-Napoca and R&D<br />
N<strong>at</strong>ional Institute for Electrical Engineering ICPE-CA<br />
“Ni-Ti-Nb SHAPE MEMORY ALLOYS PROCESSING BY<br />
SHS FROM MECHANICALLY ACTIVATED POWDERS”<br />
Romania<br />
Paper ID: 252 Hall B 17:10-17:30<br />
RADU MURESAN, DANA SALOMIE, CALIN-<br />
VIRGILIU PRICA and MARIUS BODEA<br />
Technical University of Cluj-Napoca<br />
“ACTIVATED SINTERING OF MECHANICALLY<br />
PROCESSED TUNGSTEN POWDER”<br />
Session 15 <strong>Powder</strong> Production and<br />
Nano M<strong>at</strong>erials<br />
South Korea<br />
Paper ID: 239 Hall C 16:10-16:30<br />
TAEK-KYUN JUNG, TAEK-JIN SUNG, MOK-<br />
SOON KIM, JEONG-WHAN HAN and SUNG YI<br />
Inha University and Portland St<strong>at</strong>e University<br />
“PROCESSING AND PROPERTIES OF BULK<br />
NANOCRYSTALLINE Al-(2-10)%Fe-5%(Mo, V, Zr) ALLOYS”<br />
Argentina<br />
Paper ID: 63 Hall C 16:30-16:50<br />
G. DOMIZZI, M.I. LUPPO, S. MINTZER, G. VIGNA<br />
Universidad Nacional de San Martín-<br />
Comisión Nacional de Energía Atómica<br />
“SINTERED COMPACTS OF TITANIUM POWDERS<br />
PRODUCED BY HYDRIDE-DEHYDRIDE METHOD”<br />
Belarus<br />
Paper ID: 55 Hall C 16:50-17:10<br />
VADIM KOVTUN, VLADIMIR PASOVETS and<br />
TADEUSZ PIECZONKA<br />
Metal-Polymer Research Institute of<br />
N<strong>at</strong>ional Academy of Sciences of Belarus,<br />
AGH University of Science and Technology<br />
“INVESTIGATION OF STRUCTURE AND PHYSICO-<br />
MECHANICAL PROPERTIES OF COMPOSITE<br />
MATERIALS BASED ON COPPER – CARBON<br />
NANOPARTICLES POWDER SYSTEMS”<br />
Egypt<br />
Paper ID: 260 Hall C 17:10-17:30<br />
SAYED FARAG MOUSTAFA<br />
Central Metallurgical R&D Institute<br />
“FABRICATION AND PROPERTIES OF COPPER-<br />
ALUMINA NANOCOMPOSITES BY MECHANO-<br />
CHEMICAL ROUTES”
10 October 2008<br />
Invited Lecture / HALL A / 13:30-14:15<br />
SÜLEYMAN SARITAŞ, President of TPMA, “PM IN TÜRKİYE”<br />
Session 16 Characteriz<strong>at</strong>ion of<br />
<strong>Powder</strong>s and Parts<br />
Türkiye<br />
Paper ID: 64 Hall A 09:00-09:20<br />
ÖZKAN GÜLSOY, MUSTAFA ATMACA<br />
Marmara University and Center for Advanced<br />
Vehicular Systems<br />
“THERMAL CONDUCTIVITY, PERMEABILITY<br />
AND MECHANICAL PROPERTIES OF SINTERED<br />
STAINLESS STEEL FOAMS”<br />
Romania<br />
Paper ID: 132 Hall A 09:20-09:40<br />
VICTORIA CHIFOR, ZAFER TEKİNER, MEHMET<br />
TÜRKER, HAKAN ATEŞ<br />
Technical University of Cluj-Napoca and Gazi<br />
University<br />
“ELECTRICAL AND THERMAL CONDUCTIVITY<br />
OF POLYMERS REINFORCED WITH METALLIC<br />
POWDERS“<br />
Romania<br />
Paper ID: 168 Hall A 09:40-10:00<br />
LIVIU BRANDUSAN, GEORGE ARGHIR, HAKAN<br />
ATEŞ, IOAN PETEAN<br />
Technical University of Cluj-Napoca and Gazi<br />
University<br />
“ELABORATION AND CHARACTERISATION OF<br />
SOME DOUBLE LAYER SINTERED MATERIALS”<br />
Türkiye<br />
Paper ID: 172 Hall A 10:00-10:20<br />
ÖZKAN ÖZDEMİR, SAKİN ZEYTİN and CUMA BİNDAL<br />
Sakarya University<br />
“THE EFFECT OF COBALT ON NiAl<br />
INTERMETALLIC MATERIALS PRODUCED BY<br />
COMBUSTION SYNTHESIS”<br />
9<br />
Session 17 Sintering and Sintering<br />
Atmospheres (in Turkish)<br />
Türkiye<br />
Paper ID: 30 Hall B 09:00-09:20<br />
AYHAN EROL, ŞÜKRÜ TALAŞ and AHMET<br />
YÖNETKEN<br />
Afyon Koc<strong>at</strong>epe University<br />
“ELEKTRİK AKIMSIZ Ni KAPLANMIŞ WC VE Fe<br />
TOZLARININ MİKRODALGA SİNTERLENMESİ”<br />
Türkiye<br />
Paper ID: 25 Hall B 09:20-09:40<br />
FEHİM FINDIK, AROCKIASAMY ANTONYRAJ,<br />
SEONG JIN PARK and RANDALL M. GERMAN<br />
Center for Advanced Vehicular Systems and<br />
Sakarya University<br />
“INVESTIGATION OF SINTERING BEHAVIOR<br />
AND MECHANICAL PROPERTIES OF Al PM<br />
ALLOYS BY THE ADDITION OF Cu AND Mg”<br />
Türkiye<br />
Paper ID: 106 Hall B 09:40-10:00<br />
BÜLENT KURT, İLYAS SOMUNKIRAN,<br />
MEHMET KAYA and ERTUĞRUL ÇELİK<br />
Fır<strong>at</strong> University<br />
“THE COATING OF POROUS NiTi ALLOY ON<br />
CoCrMo PM ALLOY SURFACE BY SHS PROCESS”<br />
Türkiye<br />
Paper ID: 254 Hall B 10:00-10:20<br />
GÜL TOSUN, LATİF ÖZLER, MEHMET KAYA,<br />
NURİ ORHAN<br />
Fır<strong>at</strong> University<br />
“SHS YÖNTEMİ İLE ÜRETİLEN NiTi<br />
ALAŞIMLARININ GÖZENEK ORANININ<br />
İNCELENMESİ”
Session 18 Secondary Oper<strong>at</strong>ions<br />
(in Turkish)<br />
Türkiye<br />
Paper ID: 109 Hall C 09:00-09:20<br />
İLYAS SOMUNKIRAN, SERKAN ÖZEL, MEHMET<br />
KAYA, FURKAN SARSILMAZ<br />
Fır<strong>at</strong> University<br />
“Co-Cr-Mo TOZ ALAŞIMINDA PRESLEME<br />
BASINCININ ABRASİV AŞINMA DİRENCİNE VE<br />
MİKROYAPIYA ETKİSİ”<br />
Azerbaijan<br />
Paper ID: 110 Hall C 09:20-09:40<br />
SEYAMİ HÜSEYNOV, AĞALİ GULİYEV ve<br />
HEYBET ELDAROV<br />
Azerbaijan St<strong>at</strong>e Petroleum Academy<br />
“TOZ METALÜRJİSİ İLE YAPILMIŞ PARÇALARIN<br />
TALAŞLI İMALATI”<br />
Türkiye<br />
Paper ID: 230 Hall C 09:40-10:00<br />
SERKAN APAY, BEHÇET GÜLENÇ, AHMET<br />
DURGUTLU, NURULLAH KIRATLI<br />
Gazi University and Dumlupınar University<br />
“TOZALTI SERT DOLGU KAYNAĞINA BOR TOZU<br />
İLAVESİNİN AŞINMA ÖZELLİKLERİ ÜZERİNE<br />
ETKİSİ”<br />
Türkiye<br />
Paper ID: 144 Hall C 10:00-10:20<br />
SELDA AKGÜN, HÜLYA DURMUŞ, SALİM<br />
ŞAHİN<br />
Celal Bayar University<br />
“TOZ METALYÖNTEMİYLE ÜRETİLMİŞ Al-FeBx<br />
KOMPOZİTLERİN AŞINMA DAVRANIŞININ<br />
İNCELENMESİ”<br />
Session 19 Characteriz<strong>at</strong>ion of Metal<br />
<strong>Powder</strong>s and PM Parts<br />
(in Turkish)<br />
Türkiye<br />
Paper ID: 87 Hall A 10:40-11:00<br />
RIDVAN YAMANOĞLU, ŞADİ KARAGÖZ<br />
Kocaeli University<br />
“PREP ATOMİZE Ti Al V ALAŞIM TOZLARININ<br />
6 4<br />
MİKROYAPISAL KARAKTERİZASYONU”<br />
10<br />
Türkiye<br />
Paper ID: 100 Hall A 11:00-11:20<br />
Ş.HAKAN ATAPEK, RIDVAN YAMANOĞLU ve<br />
ŞADİ KARAGÖZ<br />
Kocaeli University<br />
“TOZ METALURJİK ÇELİKLERDE FRAKTOGRAFİK<br />
ETÜDLER”<br />
Türkiye<br />
Paper ID: 246 Hall A 11:20-11:40<br />
ÇETİN KARATAŞ, ŞÜKRÜ UPRAK<br />
Gazi University<br />
“TOZ ENJEKSİYON KALIPLAMADA SU BAZLI<br />
BAĞLAYICI KULLANARAK OLUŞTURULAN IN718<br />
SÜPERALAŞIM TOZLU BESLEME STOKLARINDAN<br />
PARÇA ÜRETİMİNİN İNCELENMESİ”<br />
Session 20 Modeling<br />
Türkiye<br />
Paper ID: 28 Hall B 10:40-11:00<br />
A.KADİR EKŞİ, MUSTAFA LAMAN, A. YILDIZ,<br />
SÜLEYMAN SARITAŞ, A. DEMİR and DURMUŞ<br />
ALİ BİRCAN<br />
Çukurova University and TOBB Univeristy of<br />
Economics and Technology<br />
“EXPERIMENTAL AND NUMERICAL STUDIES OF<br />
METAL POWDERS PRESSED BY COLD ISOSTATIC<br />
PRESSING UNIT CASE ALUMINIUM AND IRON”<br />
Ukraine<br />
Paper ID: 65 Hall B 11:00-11:20<br />
LYUDMILA RYABICHEVA, MICHAEL SHTERN,<br />
DMYTRO USATYUK and OKSANA GAPONOVA<br />
East-Ukrainian Volodymir Dal N<strong>at</strong>ional<br />
University, Frantsevich Institute For Problems<br />
of M<strong>at</strong>erials Science NAS of Ukraine<br />
“MATHEMATICAL MODELING OF AN<br />
INTERRELATIONSHIP OF PROPERTIES OF THE<br />
POROUS BODY AND MATERIAL OF HARD<br />
PHASE”<br />
Romania<br />
Paper ID: 248 Hall B 11:20-11:40<br />
BODEA MARIUS, MURESAN RADU, SALOMIE<br />
DANA and PRICA CALIN<br />
Technical University of Cluj-Napoca<br />
“MATHEMATICAL ANALYSIS OF THE POWDER<br />
PARTICLES SHAPES”
Türkiye<br />
Paper ID: 259 Hall B 11:40-12:00<br />
ERDEM ACAR<br />
TOBB Univeristy of Economics and Technology<br />
“SENSITIVITY AND UNCERTAINTY ANALYSIS OF<br />
MICROSTRUCTURE PROPERTY RELATIONS FOR<br />
COMPACTED POWDER METALS”<br />
Session 21 Applic<strong>at</strong>ions (in Turkish)<br />
Türkiye<br />
Paper ID: 195 Hall C 10:40-11:00<br />
ALİ OSMAN ER, NECİP CAMUŞCU, ERSAN ASLAN<br />
Kırıkkale University, TOBB ETÜ ve Yüzüncüyıl<br />
University<br />
“AISI D3 (X210CR12) SOĞUK İŞ TAKIM<br />
ÇELİĞİNİN YÜKSEK HIZDA İŞLENMESİNDE<br />
KESİCİ PERFORMANSLARININ İNCELENMESİ”<br />
Türkiye<br />
Paper ID: 240 Hall C 11:00-11:20<br />
RECEP ARTIR, BURHAN DİNÇ<br />
Sakarya University, Marmara University<br />
“ELEKTRİK ARK OCAĞI (EAO) BACA<br />
TOZLARININ PLAZMA SPREY KAPLAMA<br />
YÖNTEMİYLE DEĞERLENDİRİLMESİ”<br />
Türkiye<br />
Paper ID: 220 Hall C 11:20-11:40<br />
MÜSLÜM KOÇ, ADEM KURT and HAKAN ATEŞ<br />
Gazi University<br />
“TOZ METAL DEMİR PARÇALARIN SERT<br />
LEHİMLEME İLE BİRLEŞTİRİLEBİLİRLİĞİ”<br />
Türkiye<br />
Paper ID: 105 Hall C 11:40-12:00<br />
SEDA SAYILGAN, ALİ KALKANLI<br />
Middle East Technical University<br />
“YÜKSEK SICAKLIK UYGULAMALARI İÇİN HAVA<br />
ATOMİZASYONU İLE ÜRETİLMİŞ Al – Fe – V – Si<br />
ALAŞIMININ GELİŞTİRİLMESİ VE KARAKTERİZASYONU”<br />
Session 22 Characteriz<strong>at</strong>ion of<br />
<strong>Powder</strong>s and Parts<br />
Türkiye<br />
Paper ID: 173 Hall A 14:30-14:50<br />
NURİ ERGİN, ÖZKAN ÖZDEMİR, CUMA BİNDAL<br />
Sakarya University<br />
“THE CHARACTERIZATION OF Al-Fe-B<br />
INTERMETALLICS COMPOUND PRODUCED BY<br />
COMBUSTION SYNTHESIS”<br />
11<br />
Poland<br />
Paper ID: 183 Hall A 14:50-15:10<br />
MAREK HEBDA, JAN KAZIOR<br />
Cracow University of Technology<br />
“MECHANICAL PROPERTIES OF INFILTRATED<br />
SINTERED AUSTENITIC STAINLESS STEEL AISI 316L”<br />
Türkiye<br />
Paper ID: 190 Hall A 15:10-15:30<br />
GÖZDE F. ÇELEBİ EFE, İBRAHİM ALTINSOY,<br />
TUBA ÇEREZCİ, MEDİHA İPEK, SAKİN ZEYTİN,<br />
CUMA BİNDAL<br />
Sakarya University<br />
“THE CHARACTERIZATION OF COPPER<br />
POWDERS MANUFACTURED BY CEMENTATION<br />
METHOD”<br />
Türkiye<br />
Paper ID: 201 Hall A 15:30-15:50<br />
BURCU ERTUĞ, TAHSİN BOYRAZ and OKAN<br />
ADDEMİR<br />
Istanbul Technical University and Cumhuriyet<br />
University<br />
“HUMIDITY SENSITIVITY AND MICRO-<br />
HARDNESS RELATIONSHIP OF BaTiO CERAMICS<br />
3<br />
WITH PMMA ADDITIVE”<br />
Session 23 Applic<strong>at</strong>ions<br />
Azerbaijan<br />
Paper ID: 48 Hall B 14:30-14:50<br />
VUGAR MAMEDOV<br />
Azerbaijan Technical University<br />
“PM CERAMIC MATERIALS IN CENTRIFUGAL<br />
PUMP SEALING APPLICATIONS STATE OF THE<br />
ART”<br />
Paper ID: 257<br />
ULF ENGSTRÖM<br />
Höganas<br />
Sweden<br />
Hall B 14:50-15:10<br />
“COST EFFECTIVE MATERIALS FOR SINTER<br />
HARDENING APPLICATIONS”<br />
Türkiye<br />
Paper ID: 191 Hall B 15:10-15:30<br />
ASIM GENÇ, CAN ÇOĞUN<br />
Gazi University<br />
“USE OF PM BORON CARBIDE ELECTRODES IN<br />
ELECTRIC DISCHARGE MACHINING”
Poland<br />
Paper ID: 184 Hall B 15:30-15:50<br />
JAN KAZIOR, MATEUSZ BYRDY, TADEUSZ<br />
PIECZONKA, ANETA SZEWCZYK – NYKIEL,<br />
MAREK NYKIEL<br />
Cracow University of Technology and AGH<br />
University of Science and Technology<br />
“Fe-Mo-P SINTERED STEELS WITH IMPROVED<br />
IMPACT STRENGTH”<br />
Session 24 Forming Processes<br />
(in Turkish)<br />
Türkiye<br />
Paper ID: 152 Hall C 14:30-14:50<br />
ARİF UZUN, MEHMET TÜRKER<br />
Gazi University<br />
“TOZ METALURJİSİ YÖNTEMİ İLE ÜRETİLEN<br />
ALÜMİNYUM ESASLI KÜRESEL ŞEKİLLİ METALİK<br />
KÖPÜKTE SiC İLAVESİNİN KÖPÜRMEYE ETKİSİ”<br />
Türkiye<br />
Paper ID: 154 Hall C 14:50-15:10<br />
UĞUR GÖKMEN, MEHMET TÜRKER ve YUSUF<br />
ÖZÇATALBAŞ<br />
Gazi University<br />
“Al O TAKVİYELİ METALİK KÖPÜĞE KÖPÜRME<br />
2 3<br />
SICAKLIĞI VE KÖPÜRTÜCÜ MADDE MİKTARININ<br />
ETKİSİNİN ARAŞTIRILMASI”<br />
Türkiye<br />
Paper ID: 42 Hall C 15:10-15:30<br />
UĞUR ÇAVDAR, ENVER ATİK and AYTAÇ ATAÇ<br />
Celal Bayar University and Toz Metal A.Ş.<br />
“TOZ METAL BURÇLARIN İNDÜKSİYONLA<br />
SİNTERLENMESİ”<br />
Türkiye<br />
Paper ID: 174 Hall C 15:30-15:50<br />
MUSA İNCEKARA, MUSTAFA BOZ, ADEM KURT<br />
ve METİN GÖBÜLÜK<br />
Karabük University, Gazi University and Metin<br />
Otomotiv<br />
“ELEKTROLİZ YÖNTEMİ İLE BAKIR TOZU<br />
ÜRETİMİNDE TOZ BOYUTU VE ŞEKLİNE AKIM<br />
YOĞUNLUĞUNUN ETKİSİ”<br />
12<br />
Session 25 Composites<br />
Romania<br />
Paper ID: 232 Hall A 16:10-16:30<br />
RADU ORBAN<br />
Technical University of Cluj-Napoca<br />
“FeTi BASED ALLOYS WITH SMALL Al AND Ni<br />
ADDITIONS FOR HYDROGEN STORAGE”<br />
Hungary<br />
Paper ID: 57 Hall A 16:30-16:50<br />
JUDIT PÁZMÁN<br />
University of Miskolc<br />
“COPPER ALLOYS/ CARBON COMPOSITE ELABORATED<br />
WITH SIMPLE POWDER METALLURGY PROCESS”<br />
Iran<br />
Paper ID: 211 Hall A 16:50-17:10<br />
MAZIYAR AZADBEH, MARYAM ABBASI<br />
Sahand University of Technology<br />
“CHARACTERISTICS OF SINTERED COPPER<br />
GRAPHITE COMPOSITE”<br />
Iran<br />
Paper ID: 204 Hall A 17:10-17:30<br />
SAEID POURNADERI, FARSHAD AKHLAGHI<br />
University of Tehran<br />
“EFFECT OF ALUMINA CONTENT ON THE SIZE<br />
DISTRIBUTION OF ALUMINUM IN Al6061-<br />
ALUMINA POWDER MIXTURE PRODUCED BY IN<br />
SITU POWDER METALLURGY (IPM) METHOD”<br />
Session 26 Composites<br />
Spain<br />
Paper ID: 197 Hall B 16:10-16:30<br />
J. CORROCHANO, M. LIEBLICH, J. IBANEZ,<br />
Z. GACSI, K. TOMOLYA, M. SVEDA, P.<br />
BARKOCZY,G. GERGELY, A. MAKSZIMUS<br />
Centro Nacional de Investigaciones<br />
Metalúrgicas and University of Miskolc<br />
“REINFORCEMENT DISTRIBUTION IN AA6061/<br />
MOSI2/5p, 15p COMPOSITES OBTAINED BY<br />
EXTRUSION OF THE POWDERS”<br />
Türkiye<br />
Paper ID: 119 Hall B 16:30-16:50<br />
AHMET ATASOY and SERKAN KUŞTUTAR<br />
Sakarya University<br />
“PROCESSING OF SILICON/ZIRCONIUM CARBIDE<br />
POWDER”
Türkiye<br />
Paper ID: 128 Hall B 16:50-17:10<br />
ULAŞ MATİK, RAMAZAN ÇITAK<br />
Gazi University<br />
“EFFECT OF ELECTROLESS Ni-P COATING ON<br />
THE ADHASIVE WEAR BEHAVIOUR OF IRON<br />
BASED PMCOMPONENTS”<br />
Session 27 Sintering and Sintering<br />
Atmospheres (in Turkish)<br />
Türkiye<br />
Paper ID: 185 Hall C 16:10-16:30<br />
ERTAN EVİN<br />
Fır<strong>at</strong> University<br />
“EFFECT OF B C ON MICROSTRUCTURE OF THE<br />
4<br />
INTERMETALLIC NiAl IN REACTIVE SINTERING”<br />
Türkiye<br />
Paper ID: 2<br />
UĞUR ÇAVDAR, ENVER ATİK<br />
Celal Bayar University<br />
“INDUCTION SINTERING OF %3 Cu CONTENTED IRON<br />
BASED POWDER METAL PARTS”<br />
Türkiye<br />
Paper ID: 5<br />
H.ÖZKAN GÜLSOY, ÇETİN KARATAŞ<br />
Marmara University and Gazi University<br />
“TOZ ENJEKSİYON KALIPLAMA İÇİN SUDA<br />
ÇÖZÜNEBİLEN YENİ BİR BAĞLAYICI SİSTEMİ”<br />
Türkiye<br />
Paper ID: 6<br />
TEYFİK DEMİR, SÜLEYMAN SARITAŞ, NURİ DURLU ve<br />
MUSTAFA ÜBEYLİ<br />
TOBB University of Economics and Technology<br />
“SEDİMENTASYON İLE TOZ BOYUTU ÖLÇÜM YÖNTEMLERİ”<br />
Türkiye<br />
Paper ID: 7<br />
TEYFİK DEMİR, SÜLEYMAN SARITAŞ, MUSTAFA<br />
ÜBEYLİ ve NURİ DURLU<br />
TOBB University of Economics and Technology<br />
“BİYEL KOLU ÜRETİMİNDE TOZ DÖVME YÖNTEMİ İLE<br />
GELENEKSEL YÖNTEMİN KARŞILAŞTIRILMASI”<br />
Posters Session<br />
13<br />
Türkiye<br />
Paper ID: 186 Hall C 16:30-16:50<br />
ERTAN EVİN<br />
Fır<strong>at</strong> University<br />
“EFFECT OF SiC ON MICROSTRUCTURE OF THE<br />
INTERMETALLIC NiAl IN REACTIVE SINTERING”<br />
Iran<br />
Paper ID: 91 Hall C 16:50-17:10<br />
M. ASKARI, H. KHORSAND, M.GHAMBARI<br />
South Branch of Azad University and K. N.<br />
Toosi University of Technology<br />
“THE ROLE OF CASE HARDENING ON WEAR<br />
BEHAVIOUR OF A SINTERED FERROUS ALLOY”<br />
Paper ID: 214<br />
RAHMİ ÜNAL<br />
Türkiye<br />
Hall C 17:10-17:30<br />
Dumlupınar University<br />
“COMPARISON OF NOZZLES FOR EFFICIENT POWDER<br />
PRODUCTION BY GAS ATOMIZATION PROCESS”<br />
Türkiye<br />
Paper ID: 70<br />
BÜLENT BOSTAN<br />
Gazi University<br />
“GAZ ATOMİZASYON YÖNTEMİ İLE AA2014 ALAŞIM<br />
TOZLARIN ÜRETİLMESİ VE KARAKTERİZASYONU”<br />
Türkiye<br />
Paper ID: 74<br />
N. SİNAN KÖKSAL, SALİM ŞAHİN, SELDA AKGÜN<br />
Celal Bayar University<br />
“Al ESASLI SiC TAKVİYELİ TM MALZEMELERİN<br />
MEKANİK ÖZELLİKLERİ VE KIRILMA DAVRANIŞININ<br />
İNCELENMESİ<br />
Romania<br />
Paper ID: 77<br />
LUISA N. MÎTCĂ (OPREA), ADEM KURT, RADU L.<br />
ORBAN, HAKAN ATES<br />
Technical University of Cluj-Napoca and Gazi<br />
University<br />
“THE EFFECT OF Al O CONTENT ON THE THERMAL AND<br />
2 3<br />
ELECTRICAL CONDUCTIVITY OF Cu-Al O ” 2 3<br />
Azerbaijan<br />
Paper ID: 83<br />
SENAN MUSTAFAYEV, SEYAMİ HUSEYNOV<br />
Azerbaijan St<strong>at</strong>e Oil Academy<br />
“RESEARCH ON ALLOYING IRON-BASED POWDER<br />
MATERIAL WITH BORON”
Türkiye<br />
Paper ID: 88<br />
RIDVAN YAMANOĞLU, ŞADİ KARAGÖZ<br />
Kocaeli University<br />
“PLASMA DESTEKLİ DÖNEL ELEKTROT YÖNTEMİ İLE<br />
ÜRETİLEN TOZLARDA PARTİKÜL BOYUTU İLE DEVİR<br />
SAYISI ARASINDAKİ İLİŞKİ”<br />
India<br />
Paper ID: 93<br />
AVIJIT MONDAL, DINESH AGRAWAL and ANISH<br />
UPADHYAYA<br />
Indian Institute of Technology<br />
“MICROWAVE HEATING OF PURE COPPER POWDER<br />
WITH DIFFERENT PARTICLE SIZE AND POROSITY”<br />
Türkiye<br />
Paper ID: 112<br />
EDİZ ERCENK, GÜNHAN BAYRAK, UĞUR ŞEN, ŞENOL<br />
YILMAZ<br />
Sakarya University<br />
“THE EFFECT OF SiC ADDITON ON EROSION OF BASALT<br />
BASED GLASS-CERAMIC COATING”<br />
Türkiye<br />
Paper ID: 113<br />
JONGEE PARK, ABDULLAH ÖZTÜRK<br />
Middle East Technical University<br />
“WEAR PROPERTIES OF APATITE-WOLLASTONITE<br />
GLASS CERAMICS PRODUCED BY POWDER PACKING<br />
PROCESS”<br />
Türkiye<br />
Paper ID: 114<br />
MEHMET KAYA, NURİ ORHAN, İLYAS SOMUNKIRAN,<br />
BÜLENT KURT<br />
Fır<strong>at</strong> University<br />
“TOZ METALURJİSİYLE ÜRETİLEN GÖZENEKLİ NiTi<br />
ŞEKİL HATIRLAMALI ALAŞIMIN KARAKTERİSTİKLERİ<br />
ÜZERİNDE SOĞUK PRESLEME BASINCININ ETKİSİ”<br />
Türkiye<br />
Paper ID: 116<br />
İLYAS SOMUNKIRAN, HALİS ÇELİK, BÜLENT KURT ve<br />
ADNAN ÇALIK<br />
Fır<strong>at</strong> University and Süleyman Demirel University<br />
“Co ESASLI TOZ ALAŞIMINDA SİNTERLEME<br />
SICAKLIĞININ AŞINMA DİRENCİNE ETKİSİ”<br />
Azerbaijan<br />
Paper ID: 121<br />
RAMIZ HASANOV, ALEVTINA SMIRNOVA, ALEXANDER<br />
VASYLEV, ALASGAR GULGAZLI, MUSA KAZIMOV,<br />
ALEXANDER VOLKOV and VUSALA QULIYEVA<br />
Azerbaijan St<strong>at</strong>e Oil Academy, University of<br />
Connecticut and Institute for Problems M<strong>at</strong>erials<br />
Science<br />
“MODELLING OF MECHANICAL BEHAVIOUR<br />
AND PREVENTION OF DEFORMATIONAL KIND<br />
COMPLICATIONS OF THE LAYERED COMPOSITE<br />
MATERIALS ON THE CERAMIC BASES”<br />
14<br />
Türkiye<br />
Paper ID: 122<br />
BİLGE DEMİR, FATİH HAYAT VE BÜLENT BOSTAN<br />
Karabük University and Gazi University<br />
“316L PASLANMAZ ÇELİK TM PARÇALARIN KUTU<br />
BORLAMA İLE KAPLANABİLİRLİĞİNİN İNCELENMESİ”<br />
Romania<br />
Paper ID: 130<br />
VICTORIA CHIFOR, RADU ORBAN, ZAFER TEKİNER and<br />
MEHMET TÜRKER<br />
Technical University of Cluj-Napoca and Gazi University<br />
“THERMAL AND MECHANICAL PROPERTIES OF ABS<br />
COMPOSITE REINFORCED WITH Cu POWDER”<br />
Romania<br />
Paper ID: 133<br />
VICTORIA CHIFOR, ZAFER TEKİNER, MEHMET TÜRKER<br />
and HAKAN ATEŞ<br />
Technical University of Cluj-Napoca and Gazi University<br />
“THERMAL AND MECHANICAL PROPERTIES OF HIGH<br />
DENSITY POLYETHYLENE MATRIX COMPOSITES<br />
REINFORCED WITH BRONZE POWDERS”<br />
Türkiye<br />
Paper ID: 134<br />
HÜLYA DURMUŞ, SELDA AKGÜN, SALİM ŞAHİN and<br />
CEVDET MERİÇ<br />
Celal Bayar University and F<strong>at</strong>ih University<br />
“Al-SiC KOMPOZİTİNİN ÜRETİMİNDE Al TANE<br />
BOYUTUNUN MEKANİK ÖZELLİKLERE ETKİSİ”<br />
Romania<br />
Paper ID: 135<br />
LUISA N. MÎTCĂ (OPREA), RADU L. ORBAN, ADEM KURT<br />
Technical University of Cluj-Napoca and Gazi University<br />
“THE PROPERTIES AND MICROSTRUCTURE OF Cu-Al O 2 3<br />
COMPOSITE PREPARED BY SHS”<br />
Germany<br />
Paper ID: 136<br />
ULRICH KESTEN, AXEL PANKEWITZ and CHRISTIAN<br />
BEHRENS<br />
Symp<strong>at</strong>ec GmbH<br />
“PARTICLE SIZE AND SHAPE ANAYLYSIS THE KEY TO<br />
SUCCESS IN METAL POWDER PRODUCTION”<br />
Türkiye<br />
Paper ID: 140<br />
MEHMET ERDEM and MEHMET TÜRKER<br />
Gazi University<br />
“EFFECT OF PRODUCTION PARAMETERS ON THE<br />
PROPERTIES OF Ni BASED SUPERALLOY POWDER<br />
PODUCED BY MECHANICAL ALLOYING”<br />
Türkiye<br />
Paper ID: 143<br />
MEHMET TÜRKER VE MEHMET ERDEM<br />
Gazi University<br />
“MEKANİK ALAŞIMLAMA YÖNTEMİ İLE ÜRETİLEN Nİ<br />
ESASLI SÜPERALAŞIMIN OKSİTLENME ÖZELLİKLERİNİN<br />
ARAŞTIRILMASI”
Türkiye<br />
Paper ID: 151<br />
ARİF UZUN, HANİFİ ÇINICI and MEHMET TÜRKER<br />
Gazi University<br />
“INVESTIGATION OF THE EFFECT OF DEFORMATION<br />
RATE AND FOAMING DURATION ON THE PROPERTIES<br />
OF SPHERICAL ALUMINUM FOAM PRODUCED BY<br />
POWDER METALLURGY”<br />
Türkiye<br />
Paper ID: 153<br />
UĞUR GÖKMEN, HANİFİ ÇINICI, YUSUF ÖZÇATALBAŞ<br />
and MEHMET TÜRKER<br />
Gazi University<br />
“INVESTIGATON OF THE EFFECT OF Al O ADITIONS<br />
2 3<br />
ON THE FOAMABILITY BEHAVIOUR ALUMINUM BASED<br />
METALLIC FOAM BY PM TECHNIQUES”<br />
Türkiye<br />
Paper ID: 155<br />
I. USLAN, Y. ATAK, L. URTEKİN and S. SARITAŞ<br />
Gazi University, Dumlupınar University and TOBB<br />
University of Economics and Technology<br />
“INVESTIGATION OF THE EFFECTS OF PARAMETERS TO<br />
OIL IMPREGNATION CAPACITY”<br />
Iran<br />
Paper ID: 159<br />
H. ASHASSI-SORKHABI, D. SEIFZADEH, E. ASGHARI<br />
Tebriz University<br />
“PHOSPHATATION OF CU-CONTAINING IRON<br />
POWDER METALLURGICAL SAMPLES FOR CORROSION<br />
PROTECTION”<br />
Romania<br />
Paper ID: 162<br />
CONSTANŢA ITTU, PATRICIA BALOG, CRISTIANA<br />
RIZESCU and NICOLAE CONSTANTIN<br />
ICEM SA, VALAHIA University, University “Politehnica”<br />
of Bucharest<br />
“THE ANALYSIS OF SLAG USED IN CASTING STEEL<br />
PROCESS”<br />
Romania<br />
Paper ID: 167<br />
LIVIU BRANDUSAN<br />
Technical University of Cluj-Napoca<br />
“SOME ASPECTS ON THERMAL DEBINDING OF SOME<br />
COMPONENTS OF INJECTED METALLIC AND CERAMIC<br />
POWDERS”<br />
Türkiye<br />
Paper ID: 175<br />
MUSA İNCEKARA, MUSTAFA BOZ, ADEM KURT,<br />
METİN GÖBÜLÜK<br />
Karabük University, Gazi University and Metin<br />
Otomotiv<br />
“ELEKTROLİZ YÖNTEMİ İLE BAKIR TOZU ÜRETİMİNDE<br />
KUTUPLARARASI MESAFENİN TOZ TANE BOYUTU VE<br />
ŞEKLİNE ETKİSİ”<br />
15<br />
Türkiye<br />
Paper ID: 187<br />
MUSTAFA ÜBEYLİ, ADEM ACIR, SERDAR KARAKAŞ,<br />
TEYFİK DEMİR<br />
TOBB ETU, Gazi University and METU<br />
“FREZELENMİŞ B C TAKVİYELİ ALÜMİNYUM ESASLI<br />
4<br />
KOMPOZİTLERİN YÜZEY PÜRÜZLÜLÜKLERİNİN<br />
İNCELENMESİ”<br />
Türkiye<br />
Paper ID: 189<br />
TUBA ÇEREZCİ, İBRAHİM ALTINSOY, GÖZDE F. ÇELEBİ<br />
EFE, MEDİHA İPEK, SAKİN ZEYTİN, CUMA BİNDAL<br />
Sakarya University<br />
“SOME PROPERTIES OF AL O -Ni COMPOSITES<br />
2 3<br />
PREPARED BY POWDER METALLURGY METHOD”<br />
Türkiye<br />
Paper ID: 196<br />
ALİ OSMAN ER, NECİP CAMUŞCU ve ERSAN ASLAN<br />
Kırıkkale University, TOBB ETÜ and Yüzüncü Yıl<br />
University<br />
“SERTLEŞTİRİLMİŞ AISI H13 SICAK İŞ TAKIM ÇELİĞİNİN<br />
YÜKSEK HIZLA İŞLENMESİNDE TOZ METALÜRJİ İLE<br />
ÜRETİLEN KESİCİ TAKIMLARIN PERFORMANSLARININ<br />
ARAŞTIRILMASI”<br />
Türkiye<br />
Paper ID: 202<br />
BURCU ERTUĞ, TAHSİN BOYRAZ and OKAN ADDEMİR<br />
İstanbul Technical University and Cumhuriyet<br />
University<br />
“HUMIDITY SENSING PROPERTIES OF LANTHANUM<br />
DOPED BARIUM TITANATE IONIC CONDUCTIVE<br />
CERAMIC SENSOR”<br />
Türkiye<br />
Paper ID: 215<br />
RAHMİ ÜNAL<br />
Dumlupınar University<br />
“CHARACTERISATION OF SPRAY DEPOSITED<br />
HYPEREUTECTIC Al-20Si ALLOY”<br />
Türkiye<br />
Paper ID: 219<br />
MUSTAFA GÜNAY, ERSİN BAHÇECİ, ULVİ ŞEKER ve<br />
MEHMET TÜRKER<br />
Gazi University<br />
“INVESTIGATION OF MECHANICAL PROPERTIES OF Al-<br />
Si ALLOY/SiC COMPOSITES PRODUCED BY POWDER<br />
P<br />
METALLURGY”<br />
Türkiye<br />
Paper ID: 250<br />
AZIM GÖKÇE, MEVLÜT AYDIN, MUSTAFA<br />
ÇIRAKKUZUOĞLU, FEHİM FINDIK ve ALİ OSMAN KURT<br />
Sakarya University<br />
“ISIL IŞLEM VE YAŞLANDIRMA PARAMETRELERININ Al-<br />
Cu-Mg TOZ METALÜRJİSİ ALAŞIMINA ETKİLERİ”
Romania<br />
Paper ID: 255<br />
DANA SALOMIE, CALIN PRICA, RADU MURESAN and<br />
MARIUS BODEA<br />
Technical University of Cluj- Napoca<br />
“STUDY ON SOLID STATE SOLUBILITY EXTENSION<br />
THROUGH MECHANICAL MILLING”<br />
Türkiye<br />
Paper ID: 35<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“AISI 1020 YÜZEYİNE Ni/Ti TOZLARININ PTA VE GTA<br />
YÖNTEMLERİYLE KAPLANMASI”<br />
Türkiye<br />
Paper ID: 36<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“Al MATRİSLİ B C TAKVİYELİ KOMPOZİTLERİN AŞINMA<br />
4<br />
DAVRANIŞINA B C BOYUTUNUN ETKİSİ”<br />
4<br />
Türkiye<br />
Paper ID: 60<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“Al/SiC METAL KÖPÜK ÜRETİMİNDE SiC BOYUTUNUN<br />
MEKANİK ÖZELLİKLERE ETKİSİ”<br />
Türkiye<br />
Paper ID: 61<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“THE EFFECT OF FeCrC PROPORTION ON THE FeCrC/Ti<br />
POWDERS COATED WITH GTA METHOD”<br />
Türkiye<br />
Paper ID: 62<br />
AYHAN ORHAN<br />
Fır<strong>at</strong> University<br />
“MICROSTRUCTURE CHARACTERIZATION OF Al MATRIX<br />
B C REINFORCEMENT COMPOSITES WELDED WITH<br />
4<br />
FRICTION WELDING METHOD”<br />
Türkiye<br />
Paper ID: 245<br />
LEVENT URTEKİN, YUSUF USTA, İBRAHİM USLAN and<br />
SÜLEYMAN SARITAŞ<br />
Dumlupinar University, Gazi University and TOBB<br />
University of Economics and Technology<br />
“INVESTIGATION THE EFFECTS OF POWDER ADDITION<br />
BY MEANS OF POWDER GEOMETRY AND DIFFERENT<br />
DIMENSIONS ON FLOW RATE AND APPARENT DENSITY<br />
OF METAL POWDER”<br />
Türkiye<br />
Paper ID: 78<br />
HÜLYA DURMUŞ, CEVDET MERİÇ<br />
Celal Bayar University and F<strong>at</strong>ih University<br />
“CO LASER WELDING OF 6061 AL ALLOY–SiC<br />
2<br />
COMPOSITE PRODUCED BY POWDER METALLURGY<br />
(PM) TECHNIQUE”<br />
16<br />
Poland<br />
Paper ID: 137<br />
MARCIN MADEJ, JAN LEŻAŃSKI<br />
AGH-University of Science and Technology<br />
“COPPER INFILTRATED HIGH SPEED STEEL BASED<br />
COMPOSITES”<br />
Romania<br />
Paper ID: 216<br />
NICULINA SECHEL, RADU L. ORBAN<br />
Technical University of Cluj-Napoca<br />
“THE INFLUENCE OF COPPER ADDITIONS AND<br />
ALLOYING MODE ON THE MECHANICAL PROPERTIES<br />
OF SINTERED Fe-2Mn-0.75C STEEL”<br />
Türkiye<br />
Paper ID: 218<br />
IOAN VIDA–SIMITI, GHEORGHE IEPURE, NICOLAIE<br />
JUMATE, NICULINA SECHEL<br />
Technical University of Cluj-Napoca and North<br />
University of Baia Mare<br />
“STUDY OF COMPOSITE MATERIALS FROM COPPER AND<br />
ALUMINA POWDER FOR ELECTRODES SPOT WELDING”<br />
Türkiye<br />
Paper ID: 120<br />
AHMET ATASOY<br />
Sakarya University<br />
“THE CURRENT STATUS OF THE TURKISH CHROMITE<br />
MINERAL INDUSTRY”<br />
Türkiye<br />
Paper ID: 127<br />
NİL ÜNAL, M. LÜTFİ ÖVEÇOĞLU<br />
Istanbul Technical University<br />
“THE INFLUENCE OF B 4 C ADDITION ON<br />
MICROSTRUCTURE AND PHYSICAL PROPERTIES OF W<br />
AND WC MATRIX COMPOSITES”<br />
Türkiye<br />
Paper ID: 194<br />
S. HAKAN YETGİN, FATİH ÇALIŞKAN ve FEHİM FINDIK<br />
Sakarya University<br />
“THE EFFECT OF DIFFERENT DESIGNED MIXERS ON THE<br />
WEAR BEHAVIORS IN MMC”<br />
Türkiye<br />
Paper ID: 23<br />
ERKAN KİBAR, RAMAZAN YILMAZ and DURSUN<br />
ÖZYÜREK<br />
Sakarya University and Karabük University<br />
“WEAR PROPERTIES OF 7075 ALUMINIUM ALLOYS<br />
PRODUCED BY POWDER METALURGY”<br />
Romania<br />
Paper ID: 76<br />
LUISA N. MÎTCĂ (OPREA), ADEM KURT, HANİFİ ÇİNİCİ,<br />
RADU L. ORBAN<br />
Technical University of Cluj-Napoca and Gazi<br />
University<br />
“THE INFLUENCE OF Al O CONTENT ON THE DENSITY<br />
2 3<br />
AND MECHANICAL PROPERTIES OF Cu-Al O ”<br />
2 3
ACCOMMODATION FORM<br />
(KONAKLAMA İSTEK FORMU)<br />
Arrival to ANKARA Departure from ANKARA<br />
[ ] 07 October 2008 [ ] 08 October 2008<br />
[ ] 08 October 2008 [ ] 09 October 2008<br />
[ ] 09 October 2008 [ ] 10 October 2008<br />
[ ] 10 October 2008 [ ] 11 October 2008<br />
[ ] 11 October 2008 [ ] 12 October 2008<br />
Total……. Days reserv<strong>at</strong>ion.<br />
Accomod<strong>at</strong>ion options:<br />
[ ] Teachers House, (3*), on Ankaray train line, single €35, double €50, including<br />
breakfast, VAT included.<br />
[ ] Best Western (Örnek Otel), (3*), on Ankaray train line, single €35, double €45,<br />
including breakfast and VAT.<br />
[ ] Gazi Park Hotel, (4*), single €55, double €75. including breakfast, VAT included.<br />
[ ] İçkale Hotel, (4*), single €55, double €75. including breakfast, VAT included.<br />
[ ] Sher<strong>at</strong>on Hotel, (5*), single or double €160, not including breakfast, VAT included.<br />
[ ] Hilton Hotel, (5*), single €172, double €195, not including breakfast, VAT included.<br />
Please make reserv<strong>at</strong>ion for me for the days and <strong>place</strong>s marked above.<br />
Name and Surname ::………………………………….<br />
Sign<strong>at</strong>ure :…………………………..…………………..<br />
D<strong>at</strong>e :………………………………………...…………..<br />
IMPORTANT NOTE:<br />
Please send this form before August 31, 2008 to the <strong>Conference</strong> Secretari<strong>at</strong>.<br />
Fax No : +90-312-292 40 91<br />
E-mail: mubeyli@etu.edu.tr<br />
18
REGISTRATION FORM<br />
Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surname:. . . . . . . . . . . . . . ... . . . . . . . . . .<br />
Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Country: . . . . . . . . . . . . . . .<br />
Tel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
E-mail: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Accompanying persons:<br />
......................<br />
......................<br />
<strong>Conference</strong> Registr<strong>at</strong>ion Fee and Sight Seeing Tours (mark the selections)<br />
[ ] <strong>Conference</strong> Registr<strong>at</strong>ion Fee € 200<br />
[ ] <strong>Conference</strong> Registr<strong>at</strong>ion Fee (for Student) € 50<br />
[ ] 2 Days Cappadocia Tour € 150<br />
[ ] Daily Beypazarı Tour € 50<br />
TOTAL REGISTRATION FEE: €...........<br />
Registr<strong>at</strong>ion fees may be paid via credit card or cash during the conference, or may be<br />
transferred to the bank account given below.<br />
Bank Account Number of Turkish <strong>Powder</strong> <strong>Metallurgy</strong> Associ<strong>at</strong>ion:<br />
Turkiye Is Bankasi, Ankara Maltepe Branch, Account No: 4212-301030-287520<br />
Turkish <strong>Powder</strong> <strong>Metallurgy</strong> Associ<strong>at</strong>ion, TOBB University of Economics and Technology,<br />
Sogutozu Cad. No: 43, Ankara, 06560, TÜRKİYE<br />
Tel: +90-312-292 40 85,+90-312-292 40 61 Fax: +90-312-292 40 91<br />
E-mail: mubeyli@etu.edu.tr<br />
19
ANKARA<br />
Ankara is the capital of Turkey and the country’s second largest city after İstanbul. The city has a mean<br />
elev<strong>at</strong>ion of 850 m (2800 ft), and as of 2007 had a popul<strong>at</strong>ion of 3,901,201. As with many ancient<br />
cities, Ankara has gone by several names over the ages: The Hittites gave it the name Ankuwash<br />
before 1200 BC. The Gal<strong>at</strong>ians and Romans called it Ancyra. In the classical, Hellenistic, and Byzantine<br />
periods it was known as Ankyra.<br />
Centrally loc<strong>at</strong>ed in An<strong>at</strong>olia, Ankara is an important commercial and industrial city. It is the center<br />
of the Turkish Government, and houses all foreign embassies. It is an important crossroads of trade,<br />
str<strong>at</strong>egically loc<strong>at</strong>ed <strong>at</strong> the center of Turkey’s highway and railway networks, and serves as the<br />
marketing center for the surrounding agricultural area. The city was famous for its long-haired<br />
Angora go<strong>at</strong> and its prized wool (mohair), a unique breed of c<strong>at</strong> (Angora c<strong>at</strong>), white rabbits and<br />
their prized wool (Angora wool), pears, honey, and the region’s musc<strong>at</strong> grapes. It has a harsh, dry<br />
continental clim<strong>at</strong>e with cold, snowy winters and hot, dry summers. Rainfall occurs mostly during the<br />
spring and autumn.<br />
After Ankara became the capital of the newly founded Republic of Turkey, new developments divided<br />
the city into an old section, called Ulus, and a new section, called Kızılay. Ancient buildings reflecting<br />
Roman, Byzantine, and Ottoman history and narrow winding streets mark the old section. The new<br />
section has the trappings of a more modern city: wide streets, hotels, the<strong>at</strong>ers, shopping malls, and<br />
high-rises. Government offices and foreign embassies are also loc<strong>at</strong>ed in the new section.<br />
Places of interest:<br />
• Anıtkabir:<br />
is loc<strong>at</strong>ed on an imposing hill, Anıttepe quarter of the city, where the mausoleum of<br />
Mustafa Kemal At<strong>at</strong>ürk, founder of the Republic of Turkey, stands.<br />
• Ankara Ethnography Museum:<br />
This museum is opposite to the Opera House on Tal<strong>at</strong> Paşa<br />
Boulevard, in the Ulus district. There is a fine collection of folkloric as well as Seljuk- and Ottomanera<br />
artifacts.<br />
• Museum of An<strong>at</strong>olian Civiliz<strong>at</strong>ions:<br />
Situ<strong>at</strong>ed <strong>at</strong> the entrance of Ankara Castle, it is an old “bedesten”<br />
(covered bazaar) th<strong>at</strong> has been beautifully restored and now houses a unique collection of<br />
Paleolithic, Neolithic, H<strong>at</strong>ti, Hittite, Phrygian, Urartian, and Roman works as well as a major<br />
section dedic<strong>at</strong>ed to Lydian treasures.<br />
• St<strong>at</strong>e Art and Sculpture Museum: This museum is close to the Ethnography Museum and houses a<br />
rich collection of Turkish art from the l<strong>at</strong>e 19th century to the present day.<br />
• War of Independence Museum: This building, loc<strong>at</strong>ed on Ulus Square, was originally the first<br />
Parliament building (TBMM) of the Republic of Turkey. The War of Independence was planned<br />
and directed here as recorded in various photographs and items presently on exhibition.<br />
• Ankara Citadel: The found<strong>at</strong>ions of the citadel were laid by the Gal<strong>at</strong>ians on a prominent lava<br />
outcrop, and the rest was completed by the Romans. The Byzantines and Seljuks further made<br />
restor<strong>at</strong>ions and additions. The area around and inside the citadel, being the oldest part of<br />
Ankara, contains many fine examples of traditional architecture. There are many restaurants<br />
serving local cuisine.<br />
Roman The<strong>at</strong>re:<br />
• The remains, the stage, and the backstage can be seen outside the castle. Roman<br />
st<strong>at</strong>ues th<strong>at</strong> were found here are exhibited in the Museum of An<strong>at</strong>olian Civiliz<strong>at</strong>ions (see above).<br />
The se<strong>at</strong>ing area is still under excav<strong>at</strong>ion.<br />
20
• Temple of Augustus and Rome: The temple was built between 25 BC - 20 BC following the conquest<br />
of Central An<strong>at</strong>olia by the Roman Empire. The temple was enlarged by the Romans in the 2nd<br />
century. In the <strong>5th</strong> century it was converted into a church by the Byzantines. It is loc<strong>at</strong>ed in the<br />
Ulus quarter of the city.<br />
• Roman B<strong>at</strong>h: This b<strong>at</strong>h has all the typical fe<strong>at</strong>ures of a classical Roman b<strong>at</strong>h: a frigidarium (cold<br />
room), tepidarium (cool room) and caldarium (hot room). It is situ<strong>at</strong>ed in the Ulus quarter.<br />
• At<strong>at</strong>ürk Forest Farm and Zoo:<br />
is an expansive recre<strong>at</strong>ional farming area which houses a zoo, several<br />
small agricultural farms, greenhouses, restaurants, a dairy farm and a brewery. It is a pleasant<br />
<strong>place</strong> to spend a day with family, be it for having picnics, hiking, biking or simply enjoying good<br />
food and n<strong>at</strong>ure.<br />
• Universities: Ankara is noted for the multitude of universities. These include the following,<br />
several of them being among the most reputable in the country: Ankara, Atılım, Başkent, Bilkent,<br />
Çankaya, Gazi, Hacettepe, METU, TOBB ETU, Ufuk, GATA, Military Academy, Police Academy.<br />
•<br />
•<br />
Shopping:<br />
� Armada Tower and Shopping Center: It won “Europe’s Best Shopping Mall” award by ICSC in<br />
2003.<br />
� ANKA MALL: It is the biggest shopping center in Turkey th<strong>at</strong> changed the concept of shopping<br />
in Ankara. Mall was opened on August 1999.<br />
� Kent Park & CEPA: CEPA was opened on August 2007 and Kent Park is under construction.<br />
Two shopping centers next to each other <strong>will</strong> function like a single mall.<br />
� Çıkrıkçılar Yokuşu (Weavers’ Road): Foreign visitors to Ankara usually like to visit the old shops<br />
in this district near Ulus, where myriad things ranging from traditional fabrics, hand-woven<br />
carpets and le<strong>at</strong>her products can be found <strong>at</strong> bargain prices.<br />
� Atakule Tower:<br />
Tower is <strong>at</strong> Çankaya and it is the highest elev<strong>at</strong>ion in the city, which commands<br />
a magnificent view over the whole city and also has a revolving restaurant <strong>at</strong> the top where<br />
the complete panorama can be enjoyed in a more leisurely fashion.<br />
Transport<strong>at</strong>ion:<br />
� Esenboğa <strong>Intern<strong>at</strong>ional</strong> Airport:<br />
It is the only civilian airport of Ankara. There are taxi and bus<br />
connections to central Ankara, AŞTİ and GAR.<br />
� Ankara Intercity Bus Terminal<br />
(AŞTİ): It is an important part of the bus network throughout<br />
Turkey.<br />
� Ankara Intercity Train St<strong>at</strong>ion (GAR): The central train st<strong>at</strong>ion, “Ankara Garı” of the Turkish<br />
St<strong>at</strong>e Railways (TCDD) is an important hub connecting the western and eastern parts of the<br />
country. High-speed rail services are to be oper<strong>at</strong>ed between Ankara and Istanbul, beginning<br />
in 2009.<br />
METRO & ANKARAY & City Bus (EGO):<br />
� EGO oper<strong>at</strong>es the Ankara Metro and other forms of public<br />
transport<strong>at</strong>ion. Ankara is currently served by suburban rail and two subway lines with about<br />
300,000 total daily commuters, and three additional subway lines are under construction.<br />
21
CAPPADOCIA<br />
Cappadocia, meaning “the land of beautiful horses”, was an extensive inland district of Turkey. The<br />
name continued to be used in western sources and in the Christian tradition throughout history<br />
and is still widely used as an intern<strong>at</strong>ional tourism concept to define a region of exceptional n<strong>at</strong>ural<br />
wonders characterized by fairy chimneys and a unique historical and cultural heritage.<br />
It is impossible to define Cappadocia’s limits with any real accuracy. In the time of Herodotus, the<br />
Cappadocians are supposed to have occupied the whole region from Mount Taurus to the vicinity<br />
of the Black Sea. Cappadocia, in this sense, was bounded in the south by the chain of Mount Taurus,<br />
to the east by the Euphr<strong>at</strong>es, to the north by Pontus, and to the west vaguely by the Salt Lake, in<br />
Central An<strong>at</strong>olia. But Strabo, the only ancient author who gives any circumstantial account of the<br />
country, gre<strong>at</strong>ly exagger<strong>at</strong>ed its dimensions. It is now believed th<strong>at</strong> 400 km (250 mi) east-west by<br />
200 km (120 mi) north-south is a more realistic appraisal of Cappadocia’s extension.<br />
Cappadocia contains several underground cities (see Kaymaklı Underground City), largely used by<br />
early Christians as hiding <strong>place</strong>s before they became a legitim<strong>at</strong>e religion. The Cappadocian F<strong>at</strong>hers<br />
of the 4th century were integral to much of early Christian philosophy. For most of the Byzantine<br />
era it remained rel<strong>at</strong>ively undisturbed by the conflicts in the area, first with the Sassanid Empire<br />
and l<strong>at</strong>er against the Islamic expansion led by Arabs. With the rise of Turkish power in An<strong>at</strong>olia,<br />
Cappadocia slowly became tributary to the Turkish st<strong>at</strong>es th<strong>at</strong> were established to the east and to<br />
the west, and some of the popul<strong>at</strong>ion converted to Islam. Cappadocia remained part of the Ottoman<br />
Empire for the centuries to come, and remains now part of the modern st<strong>at</strong>e of Turkey.<br />
The area is a famous and popular tourist destin<strong>at</strong>ion, as it has many areas with unique geological,<br />
historic and cultural fe<strong>at</strong>ures. The region is southwest of the major city Kayseri, which has airline and<br />
railroad service to Ankara and Istanbul.<br />
The Cappadocia region is largely underlain by sedimentary rocks formed in lakes and streams,<br />
and ignimbrite deposits erupted from ancient volcanoes approxim<strong>at</strong>ely 9 to 3 million years ago<br />
(l<strong>at</strong>e Miocene to Pliocene epochs). The rocks of Cappadocia near Göreme eroded into hundreds of<br />
spectacular pillars and minaret-like forms. The volcanic deposits are soft rocks th<strong>at</strong> the people of the<br />
villages <strong>at</strong> the heart of the Cappadocia Region carved out to form houses, churches, monasteries.<br />
Göreme became a monastic center between 300-1200 AD. First period settlement in Göreme reaches<br />
to the Roman period from Christianity. The Göreme Open Air Museum is the most visited site of<br />
the monastic communities in Cappadocia and is one of the most famous sites in central Turkey. It<br />
is a complex comprising more than 30 rock-carved churches and chapels containing some superb<br />
frescoes, d<strong>at</strong>ing from the 9th to the 11th centuries.<br />
Ihlara Valley is a 16 km (10 mi) long gorge cut into volcanic rock in the southern part of Cappadocia,<br />
following several eruptions of Mount Hasan and Mount Erciyes. Through the valley flows Melendiz<br />
Stream. Wh<strong>at</strong> is unique about this valley is the ancient history of its inhabitants. The whole canyon<br />
is honeycombed with rock-cut underground dwellings and churches from the Byzantine period. Due<br />
to the richness of the w<strong>at</strong>ering possibility and its hidden form and easily to hide structure, it was the<br />
first settlement <strong>place</strong> of the first Christians escaping from the Roman soldiers. In the Ihlara Valley<br />
there are hundreds of antic churches caved in the volcanic rocks. The Melendiz River finds its source<br />
in the numerous springs of the Mount Melendiz and the adjacent Mount Hasan to its west. These<br />
mountains comprise a series of currently inactive volcanoes th<strong>at</strong>, over millions of years, deposited a<br />
thick layer (1500 feet) of volcanic lava, ash and mud. This m<strong>at</strong>erial hardened to form a soft volcanic<br />
rock known as tufa which was overlaid with a thinner layer of hard basalt. With the passing of time,<br />
the Melendiz River has carved a steep sided gorge on its way toward the marshes of Lake Salt leaving<br />
behind expanses of fl<strong>at</strong>, basalt topped pl<strong>at</strong>eaus th<strong>at</strong> characterize this region.<br />
22
BEYPAZARI<br />
The name Beypazarı means The Bey’s market in Turkish, as in the Ottoman period this was an<br />
important military base and the cavalry st<strong>at</strong>ioned here were an important element of the local<br />
economy.<br />
Beypazarı, ancient Lagania, is a town and district of Ankara Province in the Central An<strong>at</strong>olia region<br />
of Turkey, approxim<strong>at</strong>ely 100 km west of the city of Ankara. According to 2000 census, popul<strong>at</strong>ion of<br />
the town is 34,441. The district covers an area of 1,814 km 2 (700 sq mi), and the average elev<strong>at</strong>ion in<br />
the center is 675 m (2,215 ft). The district contains three other small towns (Karaşar, Uruş, Kırbaşı) and<br />
64 villages. It used to be an important city in Asia Minor in ancient times. The area has a long history<br />
of occup<strong>at</strong>ion by Hittites, Phrygians, Ancient Romans, Byzantines, Seljuk Turks and the Ottoman<br />
Empire. Town was a stop on the silk trade route connecting Istanbul to Baghdad.<br />
Beypazarı today is a small town in a rural district famous for its carrots, (producing nearly 60% of<br />
Turkey’s carrots), silverwork (Telkari), and a high quality n<strong>at</strong>ural mineral w<strong>at</strong>er. The crystal mineral<br />
trona, a kind of n<strong>at</strong>ural soda used in glass-making is extracted in Beypazarı.<br />
With its rich history, architectural heritage and <strong>at</strong>tractive rocky countryside Beypazarı is becoming<br />
increasingly <strong>at</strong>tractive to visitors, especially day-trippers from Ankara. The cobbled streets of white<br />
Ottoman period buildings are particularly <strong>at</strong>tractive; many of the old houses have been restored<br />
as hotels and restaurants (and are also popular with Turkish film directors looking for authentic<br />
loc<strong>at</strong>ions. The visitors of course are bringing valuable income to the town, shopping for silverware<br />
and providing good custom for the food markets and restaurants.<br />
For many visitors a major <strong>at</strong>traction is the cuisine, which includes typical Turkish dishes such as the<br />
yoghurt drink ayran, tarhana, stuffed vine leaves, home-made sausage mumbar, and a stew cooked in<br />
a stone-oven güveç. Sweets include the sweet cream pudding called höşmerim and pastries including<br />
a dry buttery biscuit called Beypazarı kurusu, and a renowned 80-layer baklava. They are also very<br />
inventive with their carrots, drinking carrot juice and producing carrot-flavored Turkish delight and<br />
carrot ice-cream. One of the best-known e<strong>at</strong>eries is the restored Ottoman house, the Taş Mektep<br />
restaurant. A popular gift to <strong>take</strong> back home is the sticky sausage-shaped fruit and walnut sweet<br />
sucuk.<br />
23
TOBB<br />
TOBB UNIVERSITY OF ECONOMICS AND TECHNOLOGY<br />
UNIVERSITY OF<br />
TOBB University of Economics and Technology ECONOMICS (TOBB AND TECHNOLOGY<br />
prepar<strong>at</strong>ion and practical work experience. Through the<br />
ETU) was founded by Turkey’s Union of Chambers co-op program, students can experience business life, a<br />
and Commodity Exchanges (TOBB) to educ<strong>at</strong>e future real work <strong>at</strong>mosphere, and get paid for their work.<br />
entrepreneurial leaders. TOBB is Turkey’s largest nongovernmental<br />
organiz<strong>at</strong>ion, with 1.2 million members<br />
across the country. It is a powerful union of chambers<br />
and the largest organiz<strong>at</strong>ion of its kind in the Turkish<br />
business arena. TOBB ETU is a unique educ<strong>at</strong>ional<br />
institution seeking to provide students with authentic<br />
and universal knowledge. Its pioneer programs, which<br />
combine both theory and practice, give students an edge<br />
in their transition to the business world.<br />
TOBB-ETU provides equal opportunity for all students by<br />
giving them a laptop computer during their registr<strong>at</strong>ion.<br />
University has a wireless internet network throughout its<br />
entire campus. TOBB ETU houses a library fully equipped<br />
with autom<strong>at</strong>ion and security systems as well as<br />
broadband and wireless internet. Its collection reached<br />
40,000 volumes of printed m<strong>at</strong>erials in 2008; along with<br />
these volumes, there is also a collection of 4,000 bound<br />
volumes of periodicals. Through 50 different d<strong>at</strong>abases<br />
TOBB ETU opened its doors to students in the academic accessed from the website, total electronic sources<br />
year 2004-2005, with three colleges (Engineering, include more than 32,000 books, 25,000 accessible full<br />
Economics and Administr<strong>at</strong>ive Sciences, and Sciences and text journals, current subscriptions to 5,700 magazines,<br />
Letters) consisting of seven departments. As of the 2008- and the bibliographic details of 40,000 journals along<br />
2009 academic year, this number has increased to four with millions of documents. TOBB ETU designed its<br />
colleges comprised of thirteen departments, and two classroom infrastructure to ensure a close student-lecturer<br />
gradu<strong>at</strong>e schools with 2250 undergradu<strong>at</strong>e and gradu<strong>at</strong>e rel<strong>at</strong>ionship. 30 students is the largest class size <strong>at</strong> TOBB<br />
students. Educ<strong>at</strong>ing the students to be individuals who ETU. All classrooms are equipped with digital projectors.<br />
are ready and well-equipped for life and prepared to Additionally, by connecting to the smart boards loc<strong>at</strong>ed<br />
assume leadership positions in different sectors is the in the amphithe<strong>at</strong>res and classrooms, students can speed<br />
main goal of our university. In addition to educ<strong>at</strong>ing up their access to written inform<strong>at</strong>ion imparted by<br />
students, TOBB ETU also seeks to train professionals and instructors. Furthermore, a classroom has been equipped<br />
entrepreneurs and to meet the changing educ<strong>at</strong>ional with full camera-screen-speaker-microphone system as an<br />
needs of individuals, employers and society. In Intelligent-Classroom for e-learning purposes and making it<br />
particular, TOBB ETU is developing programs to improve possible to communic<strong>at</strong>e with similarly equipped classrooms<br />
professional educ<strong>at</strong>ion, and to increase the amount of everywhere in the world through internet. The official<br />
high-quality research activity th<strong>at</strong> influences str<strong>at</strong>egy, language of instruction <strong>at</strong> TOBB ETU is Turkish. However,<br />
policy and practice.<br />
students are required to <strong>at</strong>tain 500 TOEFL score.<br />
In line with these goals, TOBB ETU seeks to consolid<strong>at</strong>e TOBB ETU offers undergradu<strong>at</strong>e and gradu<strong>at</strong>e programs<br />
its position in the world of academics by opening new in the fields of social sciences and engineering.<br />
departments and co-oper<strong>at</strong>ing with other leading<br />
universities, intern<strong>at</strong>ional academic institutions and<br />
establishments. TOBB ETU is a very ambitious institution<br />
with ample human resources and investment in<br />
infrastructure.<br />
Undergradu<strong>at</strong>e programs are: economics, intern<strong>at</strong>ional<br />
rel<strong>at</strong>ions and management in the College of Economics<br />
and Administr<strong>at</strong>ive Sciences; computer engineering,<br />
electrical and electronics engineering, industrial<br />
engineering and mechanical engineering in College of<br />
Engineering; history, m<strong>at</strong>hem<strong>at</strong>ics and Turkish liter<strong>at</strong>ure<br />
According to the st<strong>at</strong>istics published by Turkey’s Higher<br />
Educ<strong>at</strong>ion Council, TOBB ETU:<br />
in College of Sciences and Letters, and art and design<br />
in College of Fine Arts. Masters programs are running<br />
for three years in computer engineering, electrical<br />
• is ranked first in Turkey by the number of SCI and electronics engineering, industrial engineering,<br />
cited journal public<strong>at</strong>ions per faculty,<br />
mechanical engineering, m<strong>at</strong>hem<strong>at</strong>ics and management.<br />
•<br />
•<br />
is one of the most preferred universities by high<br />
school students in Turkey,<br />
is the leading university in Turkey in terms of the<br />
PhD programs are started in computer engineering and<br />
mechanical engineering in fall of 2008.<br />
TOBB ETU offers a dynamic and lively environment for<br />
social life and extra-curricular activities. The campus<br />
financial investment per student,<br />
itself currently has the capacity to accommod<strong>at</strong>e 3,000<br />
• is ranked first with 21% tuition fee income to<br />
total income r<strong>at</strong>io,<br />
students by intern<strong>at</strong>ional standards. The university<br />
provides free or subsidized access to many on-campus<br />
activities including the sports facilities, and funding for<br />
• is ranked second with 9 students per faculty. activities of the student clubs <strong>at</strong> the university. Paying<br />
<strong>at</strong>tention to students’ needs for individual development<br />
TOBB ETU adopted a Cooper<strong>at</strong>ive (co-op) Educ<strong>at</strong>ion and helping them become entrepreneurial, innov<strong>at</strong>ive<br />
Model requiring th<strong>at</strong> all students receive practical and socially responsible individuals who could easily<br />
training for <strong>at</strong> least three and half months a year in act as team workers whenever needed are all parts of<br />
their second, third and fourth years so as to prepare<br />
students for a competitive career in the future. As such,<br />
the university has a “hands on learning” philosophy, and<br />
combines scholarly educ<strong>at</strong>ion and cooper<strong>at</strong>ive educ<strong>at</strong>ion<br />
to give students the best of both worlds: strong academic<br />
TOBB ETU’s teaching philosophy. Accordingly, TOBB<br />
ETU encourages students to actively particip<strong>at</strong>e in the<br />
administr<strong>at</strong>ion of the university as well. The university<br />
administr<strong>at</strong>ion and student represent<strong>at</strong>ives are in<br />
constant dialogue to improve educ<strong>at</strong>ion and to promote<br />
a more active student body.<br />
24
Cappadocia - Fairy Chimneys<br />
The interesting rock form<strong>at</strong>ions, known as “fairy<br />
chimneys”, have been formed as the result of the<br />
erosion of this tufa layer, sculpted by wind and flood<br />
w<strong>at</strong>er, running down on the slopes of the valleys.<br />
W<strong>at</strong>er has found its way through the valleys cre<strong>at</strong>ing<br />
cracks and ruptures in the hard rock. The softer, easily<br />
erodable m<strong>at</strong>erial underne<strong>at</strong>h has been gradually<br />
swept away receding the slopes and in this way,<br />
conical form<strong>at</strong>ions protected with basalt caps have<br />
been cre<strong>at</strong>ed.<br />
The fairy chimneys with caps, mainly found in the<br />
vicinity of Urgup, have a conical shaped body and a<br />
boulder on top of it. The cone is constructed from<br />
tufa and volcanic ash, while the cap is of hard, more<br />
resistant rock such as lahar or ignimbrite. Various<br />
types of fairy chimneys are found in Cappadocia.<br />
Among these are those with caps, cones, mushroom<br />
like forms, columns and pointed rocks.<br />
Fairy chimneys are generally found in the valleys of<br />
the Uçhisar-Ürgüp-Avanos triangle, between Ürgüp<br />
and Şahinefendi, around the town of Ç<strong>at</strong> in Nevşehir,<br />
in the Soğanlı valley in Kayseri, and in the village of<br />
Selime in Aksaray.<br />
80<br />
layers<br />
baklava<br />
Beypazarı Houses<br />
From an architectural point of view,<br />
Beypazarı Houses are buildings of 2 or 3<br />
floors, of Cumbali or Gusganah types. The<br />
main walls of the buildings are made of<br />
stone, the remaining parts of wood and<br />
plastered from the outside. The top of the<br />
buildings are covered with a roof of tiles.<br />
The part of the <strong>at</strong>tic raised through the<br />
roof of the houses is called Gusgana. This<br />
is used as a stock room. The untre<strong>at</strong>ed part<br />
of the upper floor of the houses is called<br />
qanti. According to tradition, people in<br />
Beypazarı leave this part untre<strong>at</strong>ed to<br />
emphasize th<strong>at</strong> they are not done in this<br />
world. These parts of the houses have been<br />
restored.
Change language