PTC-8001 Universal Temperature Calibrator - AMC-magazin.ro

<strong>PTC</strong>-<strong>8001</strong><strong>Universal</strong> <strong>Temperature</strong> <strong>Calibrator</strong>DescriptionThe <strong>PTC</strong>-<strong>8001</strong> Precision <strong>Temperature</strong> <strong>Calibrator</strong>is an ideal device to handle all of your temperaturecalibration needs in a truly rugged, low-cost package.It combines virtually all widely used thermocouplesand RTDs in one device — you’ll never have to worryabout finding a temperature device you can’t calibrate.This is especially true when calibrating “smart” orpulsed RTD transmitters, where many other calibratorsfail to work or operate at reduced accuracy specs. The<strong>PTC</strong>-<strong>8001</strong> handles those applications with ease.Features• Calibrate thermocouples and RTDs with one unit• Works with Rosemount 3144 and all other smarttransmitters• Direct keyboard entry or scroll control of output• User-defined setpoints• High accuracy ±0.4°C J T/C and ±0.3 °C 4W PT385RTD; all errors included• Ten (10) T/C types and eight (8) RTD types includingPT 385 (1,000 Ohm) and Cu (10 Ohm)• NEMA 4 rated case, rugged design• RTD simulation works with all pulsed (smart)transmitters• YSI 400 series thermistor range for medical applications• Standard mini-plug connections for T/C• Standard banana jack connections for RTDs• Store up to nine (9) setpoints for each outputfunction• RS232 interface• Supplied in full rubber bootMartel Electronics Corporation<strong>PTC</strong>-<strong>8001</strong> <strong>Universal</strong> <strong>Temperature</strong> <strong>Calibrator</strong>

<strong>PTC</strong>-<strong>8001</strong> Specifications (23 °C ±5 °C unless otherwise noted)RTD Read and SourceRangesT/C J, K, T, E, R, S, N, B, L, U,including -10 to 75 mVRTD Pt 385 (100, 200, 500, 1000Ohms), Pt 392, JIS, Ni120,Cu10, YSI 400Ohm 0.0 to 400.0; 400 to 3,200mV -10 to +75RTD IEX-RangeRTD Frequency ResponseMartel Electronics CorporationPO Box 770Londonderry, NH 03053 USATel: 800-821-0023Email: sales@martelcorp.comWeb: www.martelcorp.com0.01 mA to 3 mA10 ms; works with allpulsed transmittersEnvironmentalOperating <strong>Temperature</strong> -10 °C to +50 °CStorage <strong>Temperature</strong> -20 °C to 60 °CPower RequirementsBatteriesMechanicalDimensions6 VDC4 AA alkaline batteries,30 hours typ. op. time8.7” H x 4.2” W x 2.3” D(220.9 x 106.6 x 58.4 mm)Weight30 ounces (849 gms)Accessories Included Test leads, 4 AA alkalinebatteries, NIST Cert.,instruction manualOptional Accessories Carrying Case;Model CC572Thermocouple Read and Source (all errors incl.)Range Minimum Maximum AccuracyJ -200.00.0K -200.00.0T -200.00.0E -200.00.0R -20.00.0500.0S -20.00.0500.0B 600.0800.01,000.0L -200.00.0U -200.00.0N -200.00.00.01,200.00.01,370.00.0400.00.0950.00.0500.01,750.00.0500.01,750.0800.01,000.01,800.00.0900.00.0400.00.01,300.00.6 °C0.4 °C0.8 °C0.5 °C0.6 °C0.5 °C0.5 °C0.4 °C2.4 °C1.7 °C1.3 °C2.4 °C1.7 °C1.4 °C2.1 °C1.7 °C1.3 °C0.45 °C0.4 °C0.7 °C0.45 °C1.1 °C0.6 °CmV -10.0 75.00 0.014% ±2Range Minimum Maximum AccuracyNI120 (672) -80.0 260.0 0.2 °CPt 100 (385) -200.0 800.0 0.33 °CPt 100 (3926) -200.0 630.0 0.3 °CPt 100 (3916) -200.0 630.0 0.3 °CPt 200 (385) -200.0 630.0 0.8 °CPt 500 (385) -200.0500.0Pt 1000 (385) -200.0100.0<strong>Temperature</strong> Probes & KitA variety of temperature probeconfigurations are available foruse with Thermocouple<strong>Calibrator</strong>s. All are Type-K, andfeature ±2.2 °C/±0.75% or±3.9 °F/±0.75% accuracy.TP Kit includes:TP-K01 through TP-K06T/C Cable KitsAll cables are terminated with astandard mini-connector on one endand bare leads on the other.80029 — Kit includes:Types J, K, T, and E T/C cables80036 — Kit includes:Types R, S, N, and B cablesDistributed by:500.0630.0100.0680.00.3 °C0.4 °C0.2 °C0.3 °CCu10 -100.0 250.0 2.2 °CYSI400 15.0 50.0 0.05 °CTP-K01Bead Probe-50 °C to 200 °C; -58 °F to +392 °FTP-K02 Immersion Probe-50 °C to 700 °C; -58 °F to +1,292 °FTP-K03Surface Probe-50 °C to 400 °C; -58 °F to +752 °FTP-K04Piercing Probe-50 °C to 600 °C; -58 °F to +1,122 °FTP-K05Surface Probe-50 °C to 400 °C; -58 °F to +752 °FTP-K06Air & Gas Probe-50 °C to 800 °C; -58 °F to +1,504 °F© Copyright 2003-2005 Martel Eectronics Corporation All trademarks are the property of their respective owners. 050502R0/OEMM/2.5MBETA <strong>Calibrator</strong>s is a Martel Electronics Corporation company brand.P/N 6800047, 5/05 Rev. A