industrial linear actuators industrial linear actuators

Electrak LA1 -S and LA1-SPTechnical dataFeatures for both LA1-S and LA1-SP• Small• Weather resistant (IP65)• Withstand 96 hour salt spray test• Motor with auto reset thermal overload protection• Self locking acme screw• Can operate in a large temperature range• Accepts large input voltage variations• Maintenance free• Models with higher load capacity possible on demandFeatures for LA1-SAvailable input voltages [Vdc] 12, 24 or 36Available screw typesAcmeMax. static load at fully retracted [N] 1300Min. / max. standard stroke [inch]S-modelSP-model1 / 62 / 6Duty cycle @ 25° C [%] 25Temperature limits at operation [°C] - 25 to + 65Protection degreeIP65Max. end play [mm] 0,9• End of stroke limit switches• Six standard strokesFeatures for LA1-SP• Potentiometer feedback• Anti rotation mechanism• Three standard strokesOptions• Custom RAL colorRestraining torque [Nm]S-modelSP-model2,3–Engineering notes• No clutchWire cross section [mm 2 ] 1Wire length [mm] 100Connector includedyesPerformance tableStandard strokesModelMax.dynamicload [N]Speed@ min. load[mm/s]Speed@ max. load[mm/s]LA1-SorderingstrokeActual strokeS[mm]LA1-SPorderingstrokeActual strokeS[mm]S(P)12–09A04 110 75 52S(P)24–09A04 110 75 52S(P)12–09A08 225 45 33S(P)24–09A08 225 45 33S(P)12–17A08 340 26 17S(P)24–17A08 340 26 17S(P)12–17A16 340 14 7S(P)24–17A16 340 14 701 2102 4603 7204 9705 12206 14802 5904 11506* 171* not possible with gear ratio 16:18