Download - Net2Phone

More documents

Recommendations

Info

Configuring the Linksys PAP2This section provides step-by-step instructions for configuring the PAP2 deviceand setting up the IP address of your computer.NOTE: You will need to use a PC that has an Internet browserand a network card installed.1. From a phone connected to the PAP2, dial **** (four stars) followedby 110#.IMPORTANT: Make note of the IP address the deviceannounces.2. From a PC connected to the same network as the PAP2, open aweb browser and enter the IP address in the Address field. (e.g.,http://)3. Click the Admin Login link.4. Click the Advanced View link.5. Click the Line 1 tab at the top of the page, and then configure thesettings as follows:⇒⇒⇒NAT Settings• NAT Keep Alive Enable = noProxy and Registration• Proxy = byod1.net2phone.com• Register = no• Use Outbound Proxy = no• Use OB Proxy In Dialog = no• Make Call Without Reg = yes• Ans Call Without Reg = yes• DNS SRV Auto Prefix = noSubscriber Information• Display Name = NO_DID1• User ID = • Password =
⇒Audio Configuration• Preferred Codec = G723• Use Pref Codec Only = no• G729a Enable = no• G723 Enable = yes• G726-16 Enable = no• G726-24 Enable = no• G726-32 Enable = no• G726-40 Enable = no• FAX Codec Symmetric = yes• DTMF Tx Method = AVT• Hook Flash Tx Method = None• Release Unused Codec = yes
Page 3: IMPORTANT NOTICE CONCERNING EMERGEN

Download - Net2Phone

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?