Capacitor Bank Spec Sheet
Capacitor Bank Spec Sheet
Capacitor Bank Spec Sheet
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Standard Electrolytic <strong>Capacitor</strong> <strong>Bank</strong> SolutionsKey DataStandard <strong>Capacitor</strong> <strong>Bank</strong>sGeneral InformationThe standard Methode capacitor subsystems integrate capacitors assembled on a sheet metal support plate and balancing resistors with aprecision engineered laminated bus bar structure. The low stray inductance capacitor banks are intended for direct mounting on theSmartPower Stack power inverter/converter. The capacitor bank has an option for snubber capacitors to be ordered with the assembly.ApplicationLoad TypeMarketsSmartPower StackResistive, InductiveSolar, Wind, UPS, Battery Storage, Motor Control,Power Conversion Applications.<strong>Capacitor</strong> <strong>Bank</strong> TopologyRated Capacitance (C)<strong>Capacitor</strong> <strong>Bank</strong> <strong>Spec</strong> <strong>Sheet</strong> 2013-03-15
Standard Electrolytic <strong>Capacitor</strong> <strong>Bank</strong> SolutionsMechanical DimensionsPART NUMBERSC04E04A02C-XXXC04E04A05C-XXXC04E04A07C-XXXC06E06A05C-XXXC06E06A08C-XXXC06E06A11C-XXXC08E08A06C-XXXC08E08A10C-XXXC08E08A12C-XXXC04F04A01C-XXXC04F04A02C-XXXC04F04A04C-XXXC06F06A02C-XXXC06F06A05C-XXXC06F06A07C-XXXC08F08A03C-XXXC08F08A06C-XXXC08F08A09C-XXXCAPCITOR BANK DIMENSION (mm)A B D E F G H200 158 115.3 18 29 43 R2.75280 226 91.3 20 37 59 R3.5380 286 91.3 20 37 59 R3.5200 158 115.3 18 29 43 R2.75280 226 91.3 20 37 59 R3.5360 286 91.3 20 37 59 R3.5<strong>Capacitor</strong> <strong>Bank</strong> <strong>Spec</strong> <strong>Sheet</strong> 2013-03-15
Standard Electrolytic <strong>Capacitor</strong> <strong>Bank</strong> Solutions<strong>Capacitor</strong> <strong>Bank</strong> Nomenclature<strong>Capacitor</strong> <strong>Bank</strong> <strong>Spec</strong> <strong>Sheet</strong> 2013-03-15
Standard Electrolytic <strong>Capacitor</strong> <strong>Bank</strong> SolutionsWhere R is the balancing resistance value in MΩ,Vm is the maximum permissible voltage of individual capacitor,n is the number of capacitors connected in series.For the SmartPower Stack TM , where the bus voltage is 700V-Typ, the balancing resistor is calculated by using formula R = (2Vm – Vb)/(0.0015CVb). The following table can be used to help select the balancing resistor for this application.<strong>Capacitor</strong> value (C) in MF Vm VbBalancing Resistor (R) inKΩ2200 450 700 86.583300 450 700 57.724700 450 700 40.522200 400 700 43.293300 400 700 28.864700 400 700 20.26Note: the balance resistors come assembled on the capacitor bank and can be damaged if not handled properly.7401 West Wilson AvenueChicago, IL 60706-4548www.methode.commstibgen@methode.comLegal DisclaimerInformation in this document supersedes and replaces all information previously supplied.<strong>Spec</strong>ifications are subject to change without notice.© 2010-2013 - All rights reserved.<strong>Capacitor</strong> <strong>Bank</strong> <strong>Spec</strong> <strong>Sheet</strong> 2013-03-15
Change language