Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Loop</strong>-<strong>O9400R</strong><strong>SDH</strong>/<strong>SONET</strong> <strong>ADM</strong>Description:<strong>Loop</strong>-<strong>O9400R</strong> STM-1/4 (OC-3/12) is an economical,STM-1/4 (OC-3/12) <strong>ADM</strong> Rack designed to have full addand drop capability up to:.Features:• 6U height, full front access (ETSI) shelf• Hot-swappable cross-connect modules,tributary modules and power modules• Temperature controlled fan tray• Cross-connect module• STM-1/4 (OC-3/12) software configurableaggregate lines• 1+1 protection• Tributary modules• 8 tributary slots• Dual ports STM-1/4 (OC-3/12) module• Triple ports E3/T3 module with M13 optionon T3 tributaries *• 16/32/63 ports E1/T1 tributary module• 1 GBE and 8 FE tributary module with L2switch*• 1 GBE or 8 FE tributary module without L2switch*• Power Modules• DC module (-36 to -72 Vdc)• AC and DC (coexistent) module (90 to 240 Vac;-36 to -72 Vdc)• Dual power (1+ 1) protection• Networking protection• Tributary protection• E1/T1: Card, Port, Line• E3/T3: Card, Port, Line• B155/622: MSP, SNCP• Cross-connect Unit (XCU) protection• MSP, SNCP• TM, <strong>ADM</strong>, and cross-connect• Full cross-connect at VC11/VC12/VC3/VC4levels• External/Internal/Line timing source with SSM• Ethernet supports GFP, LAPS, VCAT andLCAS• DTMF Engineering Order-Wire using VoIPphone• Management• Console port, VT100 menu-driven• SNMP port• Telnet• Centralized management with <strong>Loop</strong>’sEMS/iNMS over DCC channel• <strong>Loop</strong>View GUI EMS Element ManagementSystem• TMN management (<strong>Loop</strong>-iNMS) with fullFCAPS and end-to-end circuit management• SSHNote: * Future Option- 1 STM-4 tributaries- 8 STM-1 tributaries- 18 E3/T3 tributaries *- 378 E1/T1 tributaries- 48 10/100M Ethernet EoS tributaries *- 6 GBE EoS tributaries *With up to 4 STM-1/4 (OC-3/12) interfaces on cross-connectmodules and 6 STM1 (OC3) interfaces on tributaries, the<strong>Loop</strong>-<strong>O9400R</strong> can offer the service provider a versatileprotection scheme including SNCP, and MSP (1+1)protection for both ring and linear network topology.All interfaces are fully compliant with the relevant ETSIstandards and ITU recommendations. The <strong>Loop</strong>-<strong>O9400R</strong>provides powerful Operation, Administration, Maintenanceand Provisioning (OAM&P) functionality, including faultmanagement, performance monitoring, configurationmanagement, and network security management. Throughconsole port, LAN port, In-band E1, and DCC channel, theOAM&P can be achieved both locally and remotely viaSNMP or menu-driven interfaces.Powerful <strong>SDH</strong> <strong>Loop</strong>’s EMS/NMSThe <strong>Loop</strong>-<strong>O9400R</strong> provides a complete set of operationinterfaces that are consistent with the TelecommunicationManagement Network (TMN) concept (ITURecommendation M.30, G.784) for <strong>SDH</strong>/<strong>SONET</strong> NetworkElement/Operations System (NE/OS), NE/NE, and NE/Craftcommunications. A user can easily operate the<strong>Loop</strong>-<strong>O9400R</strong> locally or remotely for centralizedmanagement.RoHS Compliance StatementThis product complies with DIRECTIVE 2002/95/ECOF THE EUROPEAN PARLIAMENT AND OF THECOUNCIL on the restriction of the use of certainhazardous substances in electrical and electronicequipment, dated 27 January 2003, including ANNEX.CERTIFIEDISO-9001
Ordering InformationTo order specify:Note: RoHS compliant units are identified by the letter G appearing immediately at the end of the ordering code.Main UnitModel Description Note<strong>Loop</strong>-O9400-R-CHA-G6U height Rack chassis for O9400 without CPU andpower modulesCPU Modules and Supporting Plug-in Modules<strong>Loop</strong>-O9400-R-CC4-GCPU module with cross-connect unit and two STM-1/4(OC-3/12) interfaces without SFP (mini-GBIC) opticalmodulesOne required for each chassisOrder two for redundancy<strong>Loop</strong>-O9400-R-CBA-G Connector Board One required for each chassis<strong>Loop</strong>-O9400-R -FANA-G Fan Tray with temperature controlled board One required for each chassisTributary Plug-in Modules<strong>Loop</strong>-O9400-R-16TE-G<strong>Loop</strong>-O9400-R-32TE-G<strong>Loop</strong>-O9400-R-63TE-G16 E1(120 ohm) or 16 T1 software programmableinterface plug-in module32 E1(120 ohm) or 32 T1 software programmableinterface plug-in module63 E1(120 ohm) or 63 T1 software programmableinterface plug-in moduleOrder two for redundancyOrder two for redundancyOrder two for redundancy<strong>Loop</strong>-O9400-R-16E75-G 16 E1(75 ohm) interface plug-in module Order two for redundancy<strong>Loop</strong>-O9400-R-32E75-G 32 E1(75 ohm) interface plug-in module Order two for redundancy<strong>Loop</strong>-O9400-R-63E75-G 63 E1(75 ohm) interface plug-in module Order two for redundancy<strong>Loop</strong>-O9400-R-B16-G<strong>Loop</strong>-O9400-R-9EoS4NSW-G<strong>Loop</strong>-O9400-R- 9EoS4SW-G<strong>Loop</strong>-O9400-R-3TE3-GSoftware<strong>Loop</strong>-O9400-R-3M13-GAccessoriesUser’s Manual<strong>Loop</strong>-O9400-R-UMAPower Modules<strong>Loop</strong>-O9400-R-SD48-G<strong>Loop</strong>-O9400-R-SAD-GPower Cord<strong>Loop</strong>-ACC-PC-USA<strong>Loop</strong>-ACC-PC-EU<strong>Loop</strong>-ACC-PC-UKSTM-1/4 (OC-3/12) software programmable interfaceplug-in module without SFP (mini-GBIC) opticalmodules1 GBE or 8FE software programmable interfaceplug-in module without L2 switch1 GBE and 8FE interface plug-in module with L2switch3 T3 or 3 E3 software programmable interface plug-inmodulesA software key to activate the 3TE3 module to haveM13 /Mx3 function for T3 interface onlyOptional, paper copy of User Manual. A CD version ofthe manual is already included as part of the standardpackage.Single -48Vdc (-36 to -72Vdc) power moduleSingle AC and DC (coexistent) power module (90 to240Vac, 50/60Hz and -36 to -72Vdc)AC power cord for Taiwan/AmericaAC power cord for EuropeAC power cord for UKOrder two for redundancy(Future Option)(Future Option)(Future Option)Order two for redundancy(Future Option)․ For redundancy purposes,ordering a second plug-inmodule will provide dualpower.․ For AC power module,choose an appropriate powercord.
<strong>Loop</strong>-ACC-PC-AUS<strong>Loop</strong>-ACC-PC-CHOrder Wire Phone<strong>Loop</strong>-O9400-R-OW-GSIP Proxy Server<strong>Loop</strong>-O9400-R-SIPConversion Panels<strong>Loop</strong>-ACC-P-1SCSI-16RJ-GAC power cord for AustraliaAC power cord for ChinaOrder Wire (VoIP) PhoneSIP proxy server basic software1u panel for one SCSI to 16 RJ connectors withoutcablesUsed for: -16TE, -32TE,-63TE<strong>Loop</strong>-ACC-P-1SCSI-16WW-G 1u panel for one SCSI to 16 Wire Wrap without cables Used for: -16TE, -32TE,-63TE<strong>Loop</strong>-ACC-P-1SCSI-16BNC-GY-box Panels<strong>Loop</strong>-ACC-Y-2SCSI-16RJ-G<strong>Loop</strong>-ACC-Y-2SCSI–16WW-G<strong>Loop</strong>-ACC-Y-2SCSI-2T50P8-16TE-G<strong>Loop</strong>-ACC-Y-2SCSI-2T50P12-16TE-G<strong>Loop</strong>-ACC-Y-2SCSI-1T64P16-16TE-G<strong>Loop</strong>-ACC-Y-2SCSI-2T50P8-16E75-G<strong>Loop</strong>-ACC-Y-2SCSI-2T50P12-16E75-G<strong>Loop</strong>-ACC-Y-2SCSI-1T64P16-16E75-G<strong>Loop</strong>-ACC-Y-4SCSI-4T50P8-32TE-G<strong>Loop</strong>-ACC-Y-4SCSI-3T50P12-32TE-G<strong>Loop</strong>-ACC-Y-4SCSI-2T64P16-32TE-G<strong>Loop</strong>-ACC-Y-4SCSI-4T50P8-32E75-G1.5u panel for one SCSI to 16 BNC connectorswithout cables1u Y-box panel for two SCSI to 16 RJ connectorswithout cables1u Y-box panel for two SCSI to 16 Wire Wrap withoutcables1u 16 port Y-box panel in E1 120 ohm or T1 for twoSCSI to two TELCO 50 connectors (8 ports perTELCO connector) without cables1u 16 port Y-box panel in E1 120 ohm or T1 for twoSCSI to two TELCO 50 connectors (12 ports to thefirst TELCO connector, 4 ports to the second TELCOconnector ) without cables1u 16 port Y-box panel in E1 120 ohm or T1 for twoSCSI to one TELCO 64 connectors (16 ports perTELCO connector) without cables1u 16 port Y-box panel in E1 75 ohm for two SCSI totwo TELCO 50 connectors (8 ports per TELCOconnector) without cables1u 16port Y-box panel in E1 75 ohm for two SCSI totwo TELCO 50 connectors (12 ports to the firstTELCO connector, 4 ports to the second TELCO)straight without cables1u 16 port Y-box panel in E1 75 ohm for two SCSI toone TELCO 64 connectors (16 ports per TELCOconnector) straight without cables1u 32 port Y-box panel in E1 120 ohm or T1 for fourSCSI to four TELCO 50 connectors (8 ports perTELCO connector) without cables1u 32 port Y-box panel in E1 120 ohm or T1 for fourSCSI to three TELCO 50 connectors (12 ports to thefirst TELCO connector, 12 ports to the secondTELCO connector and 8 ports to the third TELCOconnector) without cables1u 32 port Y-box panel in E1 120 ohm or T1 for fourSCSI to two TELCO 64 connectors (16 ports perTELCO connector) without cables1u 32 port Y-box panel in E1 75 ohm for four SCSI tofour TELCO 50 connectors (8 ports per TELCOconnector) without cablesUsed for: -16E75, -32E75,-63E75Used for: -16TE, -32TE,-63TEUsed for: -16TE, -32TE,-63TEUsed for: -16TEUsed for: -16TEUsed for: -16TEUsed for: -16TEUsed for: -16TEUsed for: -16TEUsed for: -32TE, -63TEUsed for: -32TE, -63TEUsed for: -32TE, -63TEUsed for: -32TE, -63TE
<strong>Loop</strong>-ACC-Y-4SCSI-3T50P12-32E75-G<strong>Loop</strong>-ACC-Y-4SCSI-2T64P16-32E75-G<strong>Loop</strong>-ACC-CAB-SCSI68M-200-SCSI68M-GBlank Panels30.001076.A00LF30.001077.A00LF1u 32 port Y-box panel in E1 75 ohm for four SCSI tothree TELCO 50 connectors (12 ports to the firstTELCO connector, 12 ports to the second TELCOconnector and 8 ports to the third TELCO connector)without cables1u 32 port Y-box panel in E1 75 ohm for four SCSI totwo TELCO 64 connectors (16 ports per TELCOconnector) without cablesA 2m SCSI, 68 Pin, male to male cableBlank panel for power supply slotsBlank panel for other slotsUsed for: -32TE, -63TEUsed for: -32TE, -63TESFP Optical/Electrical Module Plug-in Tables155 Mbps MHBTW Multi mode (mini GBIC) SFP, 155M, 1310nm commercial(0 to +70°C), 2Km, LC optical connectorPHB3W Single mode (mini GBIC) SFP 155M, 1310nm commercial(0 to +70°C), 30Km, LC optical connectorPHB5W Single mode (mini GBIC) SFP 155M, 1310nm commercial(0 to +70°C), 50Km, LC optical connectorPHCUW Single mode (mini GBIC) SFP 155M, 1550nm commercial(0 to +70°C), 100Km, LC optical connectorPHCXW Single mode (mini GBIC) SFP 155M, 1550nm commercial(0 to +70°C), 120Km, LC optical connectorPHB3D Single mode (mini GBIC) SFP 155M, 1310nm commercial(0 to +70°C), 30Km, LC optical connector with digital diagnosticmonitoringPHB5D Single mode (mini GBIC) SFP 155M, 1310nm commercial(0 to +70°C), 50Km, LC optical connector with digital diagnosticmonitoringPHCUD Single mode (mini GBIC) SFP 155M, 1550nm commercial(0 to +70°C), 100Km, LC optical connector with digital diagnosticmonitoringPHCXD Single mode (mini GBIC) SFP 155M, 1550nm commercial(0 to +70°C), 120Km, LC optical connector with digital diagnosticmonitoringEHNAC Electrical transceiver module, SFP 155M, (-40 to ∼+85°C), 100m,mini-BNC coaxial connectorUse 2 fibers for all SFPoptical modules622 Mbps PJB2W Single mode (mini GBIC) SFP, 622M, 1310nm commercial(0 to +70°C), 15~ 20Km, LC optical connectorPJB4W Single mode (mini GBIC) SFP, 622M, 1310nm commercial(0 to +70°C), 40Km, LC optical connectorPJB5W Single mode (mini GBIC) SFP, 622M, 1310nm commercial(0 to +70°C), 50Km, LC optical connectorPJC8W Single mode (mini GBIC) SFP, 622M, 1550nm commercial(0 to +70°C), 80Km, LC optical connectorPJB2D Single mode (mini GBIC) SFP, 622M, 1310nm commercial(0 to +70°C), 15~20Km, LC optical connector with digital diagnosticmonitoringPJB4D Single mode (mini GBIC) SFP, 622M, 1310nm commercial(0 to +70°C), 40Km, LC optical connector with digital diagnosticmonitoringPJB5D Single mode (mini GBIC) SFP, 622M, 1310nm commercial(0 to +70°C ), 50Km, LC with digital diagnostic monitoringPJC8D Single mode (mini GBIC) SFP, 622M, 1550nm commercial(0 to +70°C), 80Km, LC optical connector with digital diagnosticmonitoringNOTE: For other special optical modules, please contact your nearest <strong>Loop</strong> sales representative.Use 2 fibers for all SFPoptical modules
LOOP-<strong>O9400R</strong> <strong>SDH</strong>/<strong>SONET</strong> <strong>ADM</strong> PRODUCT SPECIFICATIONSMax. Number of Cross-connect Modules4 STM-1/4 (OC-3/12) aggregate linesMax. Number of Tributary Modules1 STM-4 (OC-12) tributaries8 STM-1 (OC3) tributaries18 E3/T3 tributaries378 E1/T1 tributaries6 GBE EoS tributaries48 10/100M Ethernet EoS tributariesSFP Module CharacteristicsSFP Optical ModuleDirection Wavelength (nm) Connector Distance(155 M bps)MHBTW Dual uni-directional fiber 1310nm LC 2 KmPHB3W Dual uni-directional fiber 1310nm LC 30 KmPHB5W Dual uni-directional fiber 1310nm LC 50 KmPHCUW Dual uni-directional fiber 1550nm LC 100 KmPHCXW Dual uni-directional fiber 1550nm LC 120 KmPHB3D Dual uni-directional fiber 1310nm LC ( with DDM) 30 KmPHB5D Dual uni-directional fiber 1310nm LC ( with DDM) 50 KmPHCUD Dual uni-directional fiber 1550nm LC ( with DDM) 100 KmPHCXD Dual uni-directional fiber 1550nm LC ( with DDM) 120 KmSFP ElectricalDirection Wavelength (nm) Connector DistanceModule (155 M bps)EHNAC Dual uni-directional n.a. Mini-BNC 100 mSFP Optical ModuleDirection Wavelength (nm) Connector Distance(622 M bps)PJB2W Dual uni-directional fiber 1310nm LC 15-20 KmPJB4W Dual uni-directional fiber 1310nm LC 40 KmPJB5W Dual uni-directional fiber 1310nm LC 50 KmPJC8W Dual uni-directional fiber 1550nm LC 80 KmPIB1D Dual uni-directional fiber 1310nm LC ( with DDM) 15 KmPJB2D Dual uni-directional fiber 1310nm LC ( with DDM) 15-20 KmPJB4D Dual uni-directional fiber 1310nm LC ( with DDM) 40 KmPJB5D Dual uni-directional fiber 1310nm LC ( with DDM) 50 KmPJC8D Dual uni-directional fiber 1310nm LC ( with DDM) 80 KmE1 InterfaceLine Rate 2.048 Mbps ± 50 ppm Jitter ITU G.823Line Code AMI/HDB3 Framing Unframed with a framing monitor onreceiving sideInput Signal ITU G.703 Impedance 75 ohm coax/120Ω twisted pairOutput Signal ITU G.703 Connector SCSI-II 68-pinOne connector for 16 portsTwo connectors for 32 portsFour connectors for 63 portsOutput Mask ETS 300 689 Sec.4.2.1.2 ITU G.703T1 InterfaceLine Rate 1.544 Mbps ± 32 ppm Jitter ITU G.824Line Code AMI/B8ZS Framing Unframed with a framing monitor onreceiving sideInput Signal ITU G.703 DSX-1 0dB to –6dB Impedance 100 ohm twisted pairOutput Signal ITU G.703 DSX-1 w/short (0-110,110-220, 220-330, 330-440,440-550 feet)Connector SCSI-II 68-pinOne connector for 16 portsTwo connectors for 32 portsFour connectors for 63 portsOutput Mask Bellcore GR-499-core
E3 InterfaceLine Rate 34.368 Mbps ± 20ppm Jitter ITU G.823Line Code HDB3 Framing Unframed, G.751Input Signal ITU G.703 Impedance 75 ohm coaxOutput Signal ITU G.703 Connector BNC connectorOutput Mask ETS 300 689 Sec.4.2.1.2 ITU G.703T3 interfaceLine Rate 44.736 Mbps ± 20ppm Jitter ITU G.824Line Code B3ZS Framing Unframed, M13/Mx3, G.747Input Signal ITU G.703 Impedance 75Ω coaxOutput Signal ITU G.703 Connector BNC connectorOutput Mask Bellcore GR-499-coreFast Ethernet interfaceLine Rate 10/100M bps Mapping n x VC12, n x VC11, n x VC3 or n x VC4Layer2 Protocol RSTP, VLAN Connector RJ45MSTP (future option)IGMP (future option)QoS (future option)Prrocess Protocol VCAT, GFP, LAPS, and LCASGigabit Ethernet interfaceLine Rate 10/100/1000Mbps Mapping n x VC12, n x VC11, n x VC3 or n x VC4Layer2 Protocol RSTP, VLAN Connector RJ45MSTP (future option)IGMP (future option)QoS (future option)Process Protocol VCAT, GFP, LAPS, and LCASSystem ClockClock SourceInternal clock4 aggregate lines clocks (STM-1/4 (OC-3/12))6 tributary clocks2 external input and output clocks (2.048 MHz of ITU-T G.703 or E1 for STM-1/4, T1 for OC-3/12)Management InterfaceLEDMulti colorsConsoleElectrical: RS232, DCEConnector: DB9, femaleUser interface: Menu driven VT-100TelnetSNMPSNMPv1, RFC1213OSS interface 10/100BaseT FE (IEEE 802.3u )NE/NE interface DCC/HDLC/PPP/Ethernet type II, In-band E1Alarm Input/OutputInputsPorts 4 Activation current 3 mAInternal resistance 1K Deactivation 1.5 mAcurrentConnectorsRJ45OutputsPorts 4 Max. rating of 3Vdc/1A; 125Vac/0.5ArelayInitial insul. resist. Min. 100M ohm (at 500Vdc)ConnectorsRJ45DiagnosticsXCU card<strong>Loop</strong>back Test Local loopback, payload loopback, line loopbackBERT Test Optical interface Direction: to optical lines
B155/622 card<strong>Loop</strong>back Test Local loopback, payload loopback, line loopback:BERT Test Optical interface Direction: to optical linesE1/T1 card<strong>Loop</strong>back Test Local loopback, line loopback:BERT Test E1/T1 interface Direction: to optical lines, to tributary linesPerformance MonitorPerformanceReportsPerformance Parameters: Error Block (EB), Background Block Error (BBE), Error Second(ES), Burst Error Second (BES), Severe Error Second (SES), Unavailable Second(UAS)Alarm HistorySystem AlarmAlarm Cut Off, Power Loss/Uneqp, Fan Fail, Fan Module Uneqp, RBC Uneqp,Overheat, TS Sync Loss, Logon and Logout, Optical Port Uneqp, Card In,Card Out, Card Type Mismatch, Card Port Number Mismatch, Card Fail,Card Registration, SNCP Switch, MSP Switch, Trib Protection Sync, StandbyXCU Takeover, Standby Trib Takeover, XCU Sync, SFP Tx Fail, SFP Rx Fail,SFP Temperature<strong>SDH</strong>/<strong>SONET</strong>Line Alarm<strong>SDH</strong>LinePI-LOS, RS-LOF, RS-TIM, RS-BIP UAS, MS-SD,MS-SF, MS-AIS, MS-RDI, MS-BIP UAS, MS-REI UAS,Ho-PathAU-LOP, AU-AIS, HP-SD, HP-SF, HP-TIM, HP-UNEQ,HP-PLM, HP-RDI-S, HP-RDI-C, HP-RDI-P, HP-BIPUAS, HP-REI UAS, LOMLo-PathTU-LOP, TU-AIS, LP-SD, LP-SF,<strong>SONET</strong>Line LOS-PI, LOF-S, TIM-S, BIP-S UAS, SD-L , SF-L ,AIS-L , RDI-L , BIP-L UAS, REI-L UASSTS-Path LOP-P, AIS-P, SD-P, SF-P, TIM-P, UNEQ-P, PLM-P, RDI-S-P, RDI-C-P, RDI-P-P, BIP-P UAS,REI-P UAS, LOMVT-PathLOP-V, AIS-V, SD-V, SF-VAlarm QueueContains up to 300 alarm records of latest alarm types, alarm severity, date and time.PowerAC and DC coexistent moduleDC module90 to 240Vac, 50/60Hz, -48Vdc (-36 to -72Vdc)-48Vdc (-36 to -72Vdc)Physical and EnvironmentalDimensions for 6U 433mm x264mm x 223.5mm (W/H/D)Temperature 0 to 50°CHumidity0-95%RH (non-condensing)MountingDesk-top stackable, 19/23 inch rack mountableStandards ComplianceITU-T G.707, G.7041, G.7042, G.775, G.783, G.806, G.823, G.747, X.86, G.664ANSI T1.105, T1.107IEEE802.1q (VLAN), 802.1w (RSTP), 802.1s(MSTP), 802.1ad (stack VLAN),802.3x (flow control), 802.1p (QoS)CertificationsEMCEMISafetyEN55024EN55022 Class A, FCC Part 15 Class A, EN55024EN60950-1, IEC60950-1
<strong>Loop</strong>-<strong>O9400R</strong> Front Panel<strong>Loop</strong>-<strong>O9400R</strong> Card Type and Capacity Reference TableSLOTS TRIB 1 TRIB 2 TRIB 3 TRIB 4 XCU1(W) XCU2(E) TRIB 5 TRIB 6 TRIB7 TRIB 8GLOBALPAYLOAD<strong>SDH</strong>155M 155M 8 x 155M 8 x 155MTributary (Plug-in Modules)Link withoutMSPLink with MSP(1+1)Max 378 E1(Single)STM-1 N/A STM-1 N/A STM-1/4 STM-1/4 STM-1 STM-12 x 155M N/A 4 X 155M N/A1 x 155M 1 x 155M 2 x 155M 2 x 155MSTM-1(2 ports)STM-1(2 ports)STM-1 N/A STM-1 N/A STM-1/4 STM-1/4 STM-1 STM-1 STM-4 N/ASTM-1 N/A STM-1 N/A STM-1/4 STM-1/4STM-1STM-1 STM-1N/A(2 ports)(2 ports) (2 ports)STM-1 STM-1 STM-1 STM-1 STM-1/4 STM-1/4STM-1 STM-1 STM-1 STM-1(2 ports) (2 ports) (2 ports) (2 ports)STM-1 STM-1 STM-1 STM-1 STM-1/4 STM-1/4STM1-1 STM-1(2 ports) (2 ports)STM-4 STM-4CONNECTOR63 E1 N/A 63 E1 N/A 63 E1 63 E1 63 E1 63 E1Max 252 E1(Protection)Max. 18 E3(Single)Max 12 E3(Protection)63 E1 63 E1 63E1 63 E1 63 E1 63 E1 63 E1 63 E13 E3 N/A 3 E3 N/A 3 E3 3 E3 3 E3 3 E33 E3 3 E3 3 E3 3 E3 3 E3 3 E3 3 E3 3 E3Max 4810/100 BT6x 1000BT(Single)8x10/100BT 1 x1000BTN/A8x10/100BT 1 x1000BTN/A8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BTMax 3210/100 BT4 x 1000 BT(Protection)8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BT8x10/100BT 1 x1000BTNote : STM-4 could also be OC-12. STM-1 could also be OC-3. E1 could also be T1. E3 could also be T3.
44444444444444444444444444444444Application Illustration 1: Single Ring Protection<strong>SDH</strong>/<strong>SONET</strong>backboneSTM-1/4(OC-3/12)O9400-R<strong>Loop</strong>-iNMS1010O9400- S10 1010 10O9400-RSTM-1/4(OC-3/12)Sub-ringO9400- S10101010O9400-RSTM-1/4(OC-3/12)RingO9400-RO9400- S10 10O9400- S10 1010 10E3/T3E1/T1EthernetO910010 10O9100E1/ T1E3/T3Ethernet101010/100MEthernetEthernetSwitch10/100MEthernetxDSLIP-DSLAME1/T1 E1/T1 E1/T1 E3/T3 E1/T1AM3420 AM3440 V4200-9 V4200-28 C5500Application Illustration 2: Two Ring ProtectionO9400-RTwo One STM-1/4 STM-4 (OC-12) (OC-3/12)One Main STM-4 Main RingRings RingO9400-RTwo One STM-1/4 STM-4 (OC-12) (OC-3/12) XCU2One Main STM-4 Main Ring (EAST)Rings RingXCU2STM-4/1 Ring withO/E(EAST) VC12P2 XC fabricSNCP ProtectionO/E O/E VC12STM-4/1 Ring with P1 P2 XC fabricSTM-1/4 SNCP ProtectionSTM-4/1 (OC-3/12) Ring withP1O/ESNCP Rings Protection STM-1/4 withwithSNCP STM-4/1 (OC-3/12) Ring622M 622MProtection SNCP Rings Protection withSNCP XCU1622M 622MProtection (WEST)XCU1P2O/E(WEST) VC12XC fabricP1O/EP2P1O/EO/EVC12XC fabricTPSG3TPSG2Trib #4TPSG1Trib #8TPSG4Trib #8TribTPSG4#7Trib #6Trib #7Trib #5TPSG3Trib #4Trib #5Trib #3TPSG2Trib #2Trib #3Trib #1TPSG1Trib #6Trib #2Trib #1252*E1/DS1or252*E1/T112*E3/DS3 252*E1/DS1or oror32* 12*E3/T3 FET 252*E1/T112*E3/DS3or or or or6*STM-1 32*FE12*E3/T3 FETMSP(1+1) or or oror6*STM-1 6*STM-1 32*FE3*STM-1 SubringsorMSP(1+1)MSP(1+1) or(Future or3*STM-1 Option)6*STM-1Subrings1*STM-4 orMSP(1+1)MSP(1+1)1*STM-4 (Future or Option)MSP(1+1) 1*STM-4 orMSP(1+1)1*STM-4MSP(1+1)
Application Illustration 3: Five Rings
Conversion Panel IllustrationsNote: One conversion panel has the capacity to handle sixteen ports. The sixteenport applications illustrated above require only one conversion panel. Thirty-twoport (32TE, 32E75) applications will require two conversion panels and sixty-threeport (63TE, 63E75) applications will require four conversion panels.
Y-box Illustrations
<strong>Loop</strong>Telecom.comLOOP TELECOMMUNICATION INTERNATIONAL, INC.Worldwide Taipei, Taiwan North America Suzhou China Tianjin China8F, No. 8, Hsin Ann Road, 6F, No.36, Alley 38, Lane 358, 8 Carrick Road 99 Suquian Road No240 Baidi RoadScience-Based Industrial Park Rueiguang Rd, Neihu 11492, Palm Beach Gardens China-Singapore Nankai DistrictHsinchu, Taiwan 300 Taipei, Taiwan 11492 Florida 33418, U.S.A. Suzhou Industrial Park Tianjin 300192 ChinaTel:+886-3-578-7696 Tel:+886-2-26590399 Tel:+1-561-627-7947 Suzhou 215021 China Tel:+86-22-8789-4027Fax:+886-3-564-6272 Fax:+886-2-26592325 Fax:+1-561-627-6615 Tel:+86-512-6252-0456 Fax:+86-22-8789-0344www.<strong>Loop</strong>Telecom.com michael_tzeng@loop.com.tw jimber561@aol.com Fax:+86-512-6252-7641 wym@loop-tj.comsales@loop.com.twchowfei@looptech.com.cn© 2008 <strong>Loop</strong> Telecommunication International, Inc. All Rights ReservedVersion 2 24 JAN 2008 Subject to change without notice.
Change language