BenefitsWide range of natural and synthetic rubbers■Incompressible—can be deformed, depending ondurometer and cross section, but can never be reducedin volume■Extensible—can be assembled over a projection orshoulder and snap tightly within a groove■Highly impermeable—can serve as a tight barrieragainst the passage of gases or liquids■Elastic—little flange pressure required to effect intimatecontact with gasket, allowing it to move with the flangesurfaces, always maintaining a seal■Complies with RMA (Rubber ManufacturingAssociation)ASTM D2000 Line CalloutsStyle ASTM Line Callout22 2AA810A13F16EA147797 4BC815A14E014E034G217986 6BC620E014E034G218314 4AA610A13B13B33, BA610A14B139064 2BE620A14E014E034F179122 5BG620A14B14EA14E014E0349518 2HK710B37219780 2HK715A1-10 B37Questions? Call Gasket ApplicationsEngineering at 1-800-448-6688.Standard CommercialTolerancesPremium-Grade and Reinforced Rubber andDiaphragm <strong>Gasketing</strong>Nominal ThicknessFractions Decimals Toleranceunder 1/32" 0.031" ±0.010"1/32" up to 1/16" 0.031" up to 0.062" ±0.012"1/16" up to 1/8" 0.062" up to 0.125" ±0.016"1/8" up to 3/16" 0.125" up to 0.187" ±0.020"3/16" up to 3/8" 0.187" up to 0.375" ±0.031"3/8" up to 9/16" 0.375" up to 0.562" ±0.047"9/16" up to 3/4" 0.562" up to 0.750" ±0.063"3/4" up to 1" 0.750" up to 1.00" ±0.093"1" and up 1.00" and up ±10%WARNING:Properties/applications shown throughout this brochure are typical. Your specific applicationshould not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult Garlock. Failure to select the propersealing products could result in property damage and/or serious personal injury.Performance data published in this brochure has been developed from field testing,customer field reports and/or in-house testing.While the utmost care has been used in compiling this brochure, we assume no responsibilityfor errors. Specifications subject to change without notice. This edition cancelsall previous issues. Subject to change without notice.GARLOCK is a registered trademark for packings, seals, gaskets, and other productsof Garlock.GarlockGaskets®C-21
Reinforced Rubber <strong>Gasketing</strong>& DiaphragmStyle 9200BenefitsElastic yet strong■Combines elasticity and extensibility of rubber withstrength of fabric insert■Specially compounded in varying burst strengths foralmost any service conditionTypical Physical PropertiesBenefitsImproved sealability■Nylon-reinforced nitrile rubber resists leakage• No measurable leakage in ASTM F-37 test fornitrogen sealability• Resists extrusion; seals at very low compressivestress■Ideal replacement for cloth-inserted rubber in waterapplicationsReinforced RubberDiaphragmStyle No. 19 9200 7992 8798Material SBR rubber with 5.0 Nitrile with Neoprene with 22 oz. Neoprene with 13 oz.oz. cotton sheeting proprietary nylon hose duck fabric insert nylon fabric insertwith 1/32" thickness insert †as fabric insert;10.8 oz. cotton chaferin all othersRubber hardness(Shore A) ±5 80 70 50 70Burst test across 2" Not recommended Not recommended 290 (20) 1,000 (7)(50 mm) dia. opening, for use as for use as 1/8" – 1 ply 1/8" – 1 plypsi (bar) diaphragm material diaphragm materialNumber of plies 1/32", 1/16", 3/32": 1 ply 1/16", 1/8": 1 ply 1/16", 3/32", 1/8": 1 ply 1/16", 3/32", 1/8": 1 ply1/8": 2 ply; 3/16": 3 ply 3/16": 2 ply 3/16": 2 ply1/4": 4 ply 1/4": 3 ply 1/4": 3 plyThickness available 1/32", 1/16", 3/32", 1/16", 1/8" 1/16", 3/32", 1/8", 1/16", 3/32", 1/8",1/8", 3/16", 1/4" 3/16", 1/4" 3/16", 1/4"Width available 48" 48" 48" 48"Finish available Thru 1/8": Cloth Thru 1/8": Cloth Smooth Thru 1/8": ClothOver 1/8": Smooth Over 1/8": Smooth Over 1/8": SmoothTemperature, max. 200°F (95°C) 250°F (120°C) 250°F (120°C) 250°F (120°C)Internal pressure, max.psig (bar) 250 (17) 250 (17) NA NAASTM D2000 Line CalloutsStyle ASTM Line Callout*19 2AA810A137992 2BC520A14B14E014E034F178798 3BC715A14E014E0349200 2BG720EA14E014* For rubber compound only, not fabric.†Special insert completely eliminates weepage through insert.WARNING:Properties/applications shown throughout this brochure are typical. Your specific applicationshould not be undertaken without independent study and evaluation for suitability.For specific application recommendations consult Garlock. Failure to select the propersealing products could result in property damage and/or serious personal injury.Performance data published in this brochure has been developed from field testing,customer field reports and/or in-house testing.While the utmost care has been used in compiling this brochure, we assume no responsibilityfor errors. Specifications subject to change without notice. This edition cancelsall previous issues. Subject to change without notice.GARLOCK is a registered trademark for packings, seals, gaskets, and other productsof Garlock.C-22