Carburetor Chokes - Good Karma Productions

K-62 / K-63 K/ K-65 KCarburetorsCarburetor K63T:17. Channel for supplying Fuel Mixturefrom Enrichener18. Float21. Drain Hole22. Emulsion Hole31. Starter Lever32. Rod33. Spring34. Plunger Launcher35. Tickler36. Needle Plunger37. Fuel Injector LauncherEnrichener35. Tickler17. Enrichener Mixture ChannelBefore starting a cold engine, lever (31) raises piston (34). Under theinfluence of vacuum, formed for the throttle when turning the kick-starter,fuel flows through the nozzle (37) in the cavity under the plunger.Here it is mixed with air, which goes through a channel to the inlet pipeof the carburetor, then in the form of a rich emulsion is directed throughchannel (17) in the mixing chamber and then into the engine cylinder.When fully raised, the plunger reaches the maximum enrichment of the mixture,based on the limited capacity of the nozzle (37). When fully retracted,the plunger needle closes the fuel feed and fuel supply is stopped.