<strong>Wiha</strong> Electronic.Precision for made-to-measure work.www.wiha.comDiagonal cutters, narrow shape.Diagonal cutters.Needle nose <strong>pliers</strong>Stripping <strong>pliers</strong>.Z 40 0 03Head shape:Design:Material:Application:Z 40 1 03Head shape:Design:Material:Application:8,021 o 9,54,0Micro diagonal cutter Electronic.Extra narrow, short head for working in particularly restricted spaces.Cutting edge with full flush cutter function.With opening spring.C 70 special tool steel.For absolutely flush cutting of soft wires in placeswhich are difficult to access in the electronics industry.Order-No.26812 118 4 ½ 0.8 60 5Diagonal cutters Electronic with wire trapping spring.Narrow, pointed head.Cutting edge with full flush cutter function.With opening spring and fixture for collecting endsof wires that have been cut off.C 70 special tool steel.For absolutely flush cutting of soft wires in placeswhich are difficult to access in the electronics industry.8,021 o 10,0Order-No.26813 128 5 1.0 70 55,010,020,048 o 13,513,05,01,2 6,0Z 46 0 03 Oblique cutting nippers Electronic.Z 36 0 03 Pointed <strong>pliers</strong> Electronic.Head shape: Wide, pointed head.Head shape: Narrow, short head.Design: Cutting edge with full flush cutter function.Design: With plain inside jaws.With cutting edge at 48° for cutting obliquely from above or from the side.Width at tip is only 1.2 mm.Material: C 70 special tool steel.Material: C 70 special tool steel.Application: For absolutely flush cutting of soft wires in placesApplication: For holding small components as well as for holding and angling wires.which are difficult to access in the electronics industry.Order-No.Order-No.26801 135 5 ½ 70 526833 138 5 ½ 1.3 70 510,03,5Z 46 0 03Head shape:Design:Material:Application:4,0Micro oblique cutting nippers Electronic.Extremely narrow, short head for working in particullarly restricted spaces.Cutting edge with full flush cutter function.Edge at 30° to face end of <strong>pliers</strong> for cutting obliquely from above orfrom the side.C 70 special tool steel.For absolutely flush cutting of soft wires in placeswhich are difficult to access in the electronics industry.Order-No.26830 118 4 ½ 0.6 60 5Z 49 2 03Head shape:Design:Material:Application:Z 49 7 03Head shape:Design:Material:Application:Electronic stripping <strong>pliers</strong>.Wide, long head with ridged gripping surface,shears blade and firm wire stripping stations.Wire stripping stations:0.8 / 1.0 / 1.3 / 1.6 / 2.0 / 2.6 mm,AWG 20 / 18 / 16 / 14 / 12 / 10.With opening spring and locking mechanism.C 70 special tool steel.For gripping, cutting and stripping of wires with diameter.Electronic stripping <strong>pliers</strong>.Wide, long head with ridged gripping surface,shears blade and firm wire stripping stations.Wire stripping stations:0,4 / 0.5 / 0.6 / 0.8 / 1.0 / 1.3 mm,AWG 26 / 24 / 22 / 20 / 18 / 16.With opening spring and locking mechanism.C 70 special tool steel.For gripping, cutting and stripping of wires with diameter.40,0Order-No.33471 180 7 0.81 - 2.59 20 - 10 70 540,0Order-No.33472 180 7 0.4 - 1.3 26 - 16 70 528,928,5<strong>Wiha</strong> InfoDetails of cutting results of cutting <strong>pliers</strong>.Symbol Types of wire Example Tensile strength ca. N/mm 2Soft wire Copper, aluminium 220 - 250Medium hard wire Iron nail 750 - 800Hard wire Spring wire, steel nails 1.600 - 1.800Piano wire Hardened spring steel 2.200 - 2.300Test wires standardised in DIN ISO 5744A variety of different <strong>pliers</strong> are requiredfor electronics applications.Simply contact us if you requiredifferent models for other applications.272273
<strong>Wiha</strong> Professional ESD.Precise in every detail.Safety note:When working with cutting <strong>pliers</strong> –beware of wire ends flying away.Please wear safety glasses.www.wiha.comHard, comfortable elastomer zonesensure low friction in the movementrange of the fingersDiagonal cutter, narrow, pointed shape.Diagonal cutter, broad, pointed shape.10,513,59,511,5Double leaf springfor sensitive workingThe anti-static,ergonomic handle isfixed to the <strong>pliers</strong>6,0Z 40 1 04 Diagonal cutter Professional ESD.Standards: DIN ISO 9654. IEC 61340-5-1.Head shape: Narrow, pointed head.Design: Bevelled cutting edges, individually tested, also appropriatefor thin, hard wires. Maximum service life of cutting edge achieved throughadditional inductive hardening to approx. 64 HRC. With opening spring.Surface resistance 10 6 - 10 9 ohms.Material: High alloy carbon steel C 60.Application: For cutting different hardnesses of wires in placeswhich are difficult to access.Z 41 1 04 Diagonal cutter Professional ESD.Standards: DIN ISO 9654. IEC 61340-5-1.Head shape: Wide, pointed head.Design: Bevelled cutting edges, also appropriate for hard wires.Maximum service life of cutting edge achieved through additional inductivehardening to approx. 64 HRC. With opening spring.Surface resistance 10 6 - 10 9 ohms.Material: High alloy carbon steel C 60.Application: All round electronic diagonal cutter for cutting wiresof different hardnesses.7,5Low glare mirrorpolished finishOrder-No.26808 115 4 ½ 1.0 0.6 0.3 60 5Order-No.26816 115 4 ½ 1.4 1.0 0.4 60 510,513,59,511,5<strong>Wiha</strong> Professional ESD is ideal forelectronics professionals needingprecise, robust <strong>pliers</strong>.The formula for success for the<strong>pliers</strong> series is as simple as it isclever: uncompromising sharpnessand hardness for flush cutting,and pleasant comfort with thehandle for firm, fatigue-freegrasping, holding and cutting.274Precision box jointwith long service lifeThe Professional ESD diagonal cutter witha broad, pointed head cut soft wires flush.Antistatic arms made of soft,non-slip elastomer are gentleon the parts of the hand thatare sensitive to pressureThe Professional ESD needle-nose <strong>pliers</strong>are predominantly used for fine grippingand bending work.Suitable for work at ESD workstationsin accordance with IEC 61340-5-1.Safety Notice:<strong>Wiha</strong> Professional ESD <strong>pliers</strong> arenoninsulated, therefore not suitablefor working on live parts.<strong>Wiha</strong> Professional ESD.• ESD safeSuitable for work at ESDworkstations in accordancewith IEC 61340-5-1, surfaceresistance 10 6 - 10 9 ohms• Anti-staticUnique: all handle componentsare discharging (dissipative)• PreciseBox joint, resistant againsttwisting• As hard as steelPliers head drop forgedfrom high quality steels• Robust and durableCutting edges are individuallytempered and additionallyinduction hardened to approx.64 HRC; joints are extremelywear resistant and withstandhigh stresses, with high-qualityriveting• ErgonomicExtra wide handle backs, withsoft and hard zones perfectlydistributed across the handle• AttractiveAppealing design withfinely polished head6,0Z 40 4 04 Diagonal cutter Professional ESD.Standards: DIN ISO 9654. IEC 61340-5-1.Head shape: Extra narrow, short head for workingin particularly restricted spaces.Design: Cutting edge almost without bevel for virtually flush cutting, individuallytested. Maximum service life of cutting edge achieved through additionalinductive hardening to approx. 64 HRC. With opening spring.Surface resistance 10 6 - 10 9 ohms.Material: High alloy carbon steel C 60.Application: For virtually flush cutting copper wire in flat placeswhich are difficult to access.Order-No.26814 115 4 ½ 1.0 60 56,0Z 40 3 04 Diagonal cutter Professional ESD.Standards: DIN ISO 9654. IEC 61340-5-1.Head shape: Narrow, pointed head.Design: Blade without facet, individually inspected, suited to thin, tough wire.Maximum service life of cutting edge achieved through additional inductivehardening to approx. 64 HRC. With opening spring.Surface resistance 10 6 - 10 9 ohms.Material: High alloy carbon steel C 60.Application: For absolutely flush cutting of copper wire in placeswhich are difficult to access.10,5Order-No.33521 115 4 ½ 1.0 60 59,57,5Z 41 3 04 Diagonal cutter Professional ESD.Standards: DIN ISO 9654. IEC 61340-5-1.Head shape: Wide, pointed head.Design: Cutting edge without bevel for absolute flush cutting.Maximum service life of cutting edge achieved through additional inductivehardening to approx. 64 HRC. With opening spring.Surface resistance 10 6 - 10 9 ohms.Material: High alloy carbon steel C 60.Application: For absolutely flush cutting of copper wire.Order-No.26821 115 4 ½ 1.0 60 57,5Z 41 4 04 Diagonal cutters Professional ESDwith wire trapping spring.Standards: DIN ISO 9654. IEC 61340-5-1.Head shape: Wide, pointed head.Design: With fixture for trapping ends of wires which have been cut off.Cutting edge with full flush cutter function for virtually flush cutting.Maximum service life of cutting edge achieved through additional inductivehardening to approx. 64 HRC.With opening spring.Surface resistance 10 6 - 10 9 ohms.Material: High alloy carbon steel C 60.Application: For virtually flush cutting copper wire, function for trapping cut off wire.13,5Order-No.26822 115 4 ½ 1.2 60 511,5275