HP StoreEasy 3830 Gateway Storage Blade - eD' system Czech, as
HP StoreEasy 3830 Gateway Storage Blade - eD' system Czech, as
HP StoreEasy 3830 Gateway Storage Blade - eD' system Czech, as
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
QuickSpecs<strong>HP</strong> <strong>StoreE<strong>as</strong>y</strong> <strong>3830</strong> <strong>Gateway</strong> <strong>Storage</strong> <strong>Blade</strong>Technical Specifications<strong>StoreE<strong>as</strong>y</strong> <strong>3830</strong> <strong>Gateway</strong> <strong>Storage</strong> <strong>Blade</strong>System UnitDimensions (H x W xD)(with bezel)Weight (approximate)Power SpecificationsSystem InletTemperatureRelative Humidity(non-condensing)System InletTemperature7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)Maximum: all processors, 14.00 lb (6.33 kg)16 DIMMs, hard drives,mezzanine cards, and twofl<strong>as</strong>h cache batteriesinstalled)Minimum: one processorand 2 DIMMs installed10.50 lb (4.75 kg)For power specifications including input requirements, BTU rating, andpower supply output, ple<strong>as</strong>e see the:<strong>HP</strong> <strong>Blade</strong>System c3000 Enclosure QuickSpecs athttp://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html.<strong>HP</strong> <strong>Blade</strong>System c7000 Enclosure QuickSpecs athttp://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.htmlTo review typical <strong>system</strong> power ratings use the <strong>HP</strong> Power Advisor whichis available via the online tool located atwww.hp.com/go/hppoweradvisorOperatingNon-operating10° to 35°C (50° to 95°F) at sea level with analtitude derating of 1.0°C per every 305 m(1.8°F per every 1,000 ft) above sea level toa maximum of 3,050 m (10,000 ft), no directsustained sunlight.Maximum rate of change is 10°C/hr(18°F/hr). The upper limit may be limited bythe type and number of options installed.System performance may be reduced ifoperating with a fan fault or above 30°C(86°F).-30° to 60°C (-22° to 140°F). Maximum rateof change is 20°C/hr (36°F/hr).Operating 10 to 90% relative humidity (Rh), 28°C(82.4°F) maximum wet bulb temperature,non-condensing.Non-operatingOperating5 to 95% relative humidity (Rh), 38.7°C(101.7°F) maximum wet bulb temperature,non-condensing.10° to 35°C (50° to 95°F) at sea level with analtitude derating of 1.0°C per every 304.8 m(1.8°F per every 1000 ft) above sea level toa maximum of 3048 m (10,000 ft), no directsustained sunlight. Maximum rate of changeis 10°C/hr (18°F/hr). The upper limit may belimited by the type and number of optionsinstalled.System performance may be reduced ifoperating with a fan fault or above 30°C(86°F).DA - 14457 Worldwide QuickSpecs — Version 2 — 12.21.2012 Page 16
Change language