Avert Gel MSDS - Pest Control Management - BASF

Page: 8/17BASF Safety data sheet according to Regulation (EC) No. 1907/2006Date / Revised: 11.10.2013 Version: 4.0Product: AVERT GEL(ID no. 30512438/SDS_GEN_GB/EN)Date of print 13.10.2013Respiratory protection:Respiratory protection not required.Hand protection:Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according toEN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and otherEye protection:Safety glasses with side-shields (frame goggles) (e.g. EN 166)Body protection:Body protection must be chosen depending on activity and possible exposure, e.g. apron, protectingboots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in caseof dust).General safety and hygiene measuresHandle in accordance with good industrial hygiene and safety practice. Wearing of closed workclothing is recommended. Store work clothing separately. Keep away from food, drink and animalfeeding stuffs.SECTION 9: Physical and Chemical Properties9.1. Information on basic physical and chemical propertiesForm:gelColour:brownOdour:mild, mustyOdour threshold:Not determined due to potentialhealth hazard by inhalation.pH value: approx. 6 - 8(water, 1 %(m), 20 °C)freezing range: < 20 °Cboiling temperature: 100 °CInformation applies to the solvent.Flash point:not applicableEvaporation rate:not applicableFlammability:Based on the structure orcomposition there is no indication offlammabilityLower explosion limit:As a result of our experience with thisproduct and our knowledge of itscomposition we do not expect anyhazard as long as the product is usedappropriately and in accordance withthe intended use.