Safety Data Sheet - AMT Composites

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 3/6Printing date 19.03.2009 Revision: 17.03.2009Trade name: GC 10 DURCISSEUR· Personal protective equipment:· General protective and hygienic measures:The usual precautionary measures are to be adhered to when handling chemicals.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Avoid contact with the eyes and skin.· Respiratory protection: Not necessary if room is well-ventilated.· Protection of hands:(Contd. of page 2)Protective gloves· Material of glovesNeoprene glovesThe selection of the suitable gloves does not only depend on the material, but also on further marksof quality and varies from manufacturer to manufacturer. As the product is a preparation ofseveral substances, the resistance of the glove material can not be calculated in advance and hastherefore to be checked prior to the application.· Penetration time of glove materialThe exact break trough time has to be found out by the manufacturer of the protective gloves andhas to be observed.· Eye protection:Safety glassesTightly sealed goggles· Body protection: Protective work clothing9 Physical and chemical properties· General InformationForm:Colour:Odour:FluidAmber colouredAmine-like· Change in conditionMelting point/Melting range: NA°CBoiling point/Boiling range: >200°C (DIN 53171)· Flash point: > 100°C (ISO 2719)· Ignition temperature: >300°C (DIN 51 794)· Decomposition temperature: >260°C (DIN 53171)· Self-igniting: Product is not selfigniting.· Danger of explosion: Product does not present an explosion hazard.· Density at 20°C: 0.98 g/cm³ (ISO 1675:1985)· Solubility in / Miscibility withwater:Not miscible or difficult to mix.· organic solvents: Soluble in many organic solvents.(Contd. on page 4)GB