Bredel SPX100 high-pressure hose pumps (US ... - Watson-Marlow

Engineering and Technical DataSPX100High-Pressure Hose PumpsFeatures and Benefits• High-strength, twin-bearing hub integratedinto the pumphead• Rotor always fully and centrally supported byits own bearings• Fail-safe shaft design• New flat shim and improved epoxy shoe design• Faster hose changing and improved sealing• Easy access to shims and shoes• Unique buffer zone provides protective barrierbetween pumphead and gearing• Patented direct-coupled design• Ultra compact planetary gearing• No drive alignment for faster set-up• No coupling or baseplate for compact footprint• Adapter available for fitting hydraulic orpneumatic motors• Improved frame design• Increased corrosion resistance• Compact design, low maintenance,• Two year warrantyPerformance ChartNEThp22.520.017.515.012.5*10.0* 40,000in lbs.7.5minimumstarting5.0torquerequired.2.5rev./min.Intermittent dutyContinuous dutyC232 psi 145 psi 109 psi 72.5 psi5 10 15 20 25 30 35 40 45 50gal./min. 0 50 100 150 200 250How to calculate speed/horsepowerA Flow required, indicates pump speedB Calculated discharge pressureC Horsepower requiredD Fluid temperatureE Calculated discharge pressureF Maximum recommended pump speed**** For maximum hose life, speed point (A) should be lowerthen temperature adjusted speed point (F). See examplepoints (A) thru (F).BAEFDPRODUCTTEMPERATURE°C (°F)40 (104)50 (122)60 (140)70 (158)80 (176)

Engineering and Technical DataSPX100High-Pressure Hose PumpsTechnical SpecificationsMaterials of ConstructionDisplacement: 5.28 gal/revSupply: 230/460 or 575 three phaseOperating Speeds: Up to 30 rpm continuousUp to 44 rpm intermittentFluid Temperature Range: -4° to 175°FHose Lubricant Required: 15.8 gallonsFlow Range: Up to 232 gpmDischarge Pressure: Up to 232 psiSuction pressure: 28 ft. lift to 23 psiAvailable Hose Materials: Natural Rubber,BUNA N, BUNA K, EPDM, Hypalon (pending)Available Insert Materials: Polypropylene,316 SS, PVDF, PVCFittings: 4" 150# Flange0999.01Pumphead: Cast ironRotor: Cast ironCover: Mild steelHub: Cast ironShoes: EpoxyFlanges and Flange Brackets:Galvanized steel or 304 SSFrame: Galvanized steelHardware: Zinc platedsteel or 304 SSShaft: Alloy steelShims: 316 SSSeals: NBRThe information contained in this document is believed to be correct, but Watson-Marlow/Bredel Pumpsaccepts no liability for any errors it contains, and reserves the right to alter specifications without notice.Watson-Marlow, Inc.37 UPTON TECHNOLOGY PARK, WILMINGTON, MA 01887-1018TEL: 800-282-8823, 978-658-6168 / FAX: 978-658-0041http://www.watson-marlow.com